isci: unify phy consume_power handlers
authorDan Williams <dan.j.williams@intel.com>
Thu, 12 May 2011 11:51:41 +0000 (04:51 -0700)
committerDan Williams <dan.j.williams@intel.com>
Sun, 3 Jul 2011 11:04:48 +0000 (04:04 -0700)
Unify the implementations in scic_sds_phy_consume_power_handler(), and kill
the state handler plus infrastructure.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
drivers/scsi/isci/phy.c
drivers/scsi/isci/phy.h

index 0ffb5d5..9a5ec37 100644 (file)
@@ -505,16 +505,53 @@ enum sci_status scic_sds_phy_reset(struct scic_sds_phy *sci_phy)
        return SCI_SUCCESS;
 }
 
-/**
- * This method will give the phy permission to consume power
- * @sci_phy:
- *
- * enum sci_status
- */
-enum sci_status scic_sds_phy_consume_power_handler(
-       struct scic_sds_phy *sci_phy)
+enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy)
 {
-       return sci_phy->state_handlers->consume_power_handler(sci_phy);
+       enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id;
+
+       switch (state) {
+       case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: {
+               u32 enable_spinup;
+
+               enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
+               enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
+               writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control);
+
+               /* Change state to the final state this substate machine has run to completion */
+               sci_base_state_machine_change_state(&sci_phy->state_machine,
+                                                   SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
+
+               return SCI_SUCCESS;
+       }
+       case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: {
+               u32 scu_sas_pcfg_value;
+
+               /* Release the spinup hold state and reset the OOB state machine */
+               scu_sas_pcfg_value =
+                       readl(&sci_phy->link_layer_registers->phy_configuration);
+               scu_sas_pcfg_value &=
+                       ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
+               scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+               writel(scu_sas_pcfg_value,
+                       &sci_phy->link_layer_registers->phy_configuration);
+
+               /* Now restart the OOB operation */
+               scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+               scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+               writel(scu_sas_pcfg_value,
+                       &sci_phy->link_layer_registers->phy_configuration);
+
+               /* Change state to the final state this substate machine has run to completion */
+               sci_base_state_machine_change_state(&sci_phy->state_machine,
+                                                   SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
+
+               return SCI_SUCCESS;
+       }
+       default:
+               dev_dbg(sciphy_to_dev(sci_phy),
+                       "%s: in wrong state: %d\n", __func__, state);
+               return SCI_FAILURE_INVALID_STATE;
+       }
 }
 
 /*
@@ -592,76 +629,6 @@ static void scic_sds_phy_complete_link_training(
                                            next_state);
 }
 
-/*
- * This method is called by the struct scic_sds_controller when the phy object is
- * granted power. - The notify enable spinups are turned on for this phy object
- * - The phy state machine is transitioned to the
- * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler(
-       struct scic_sds_phy *sci_phy)
-{
-       u32 enable_spinup;
-
-       enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control);
-       enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
-       writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control);
-
-       /* Change state to the final state this substate machine has run to completion */
-       sci_base_state_machine_change_state(&sci_phy->state_machine,
-                                           SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
-
-       return SCI_SUCCESS;
-}
-
-/*
- * This method is called by the struct scic_sds_controller when the phy object is
- * granted power. - The phy state machine is transitioned to the
- * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS
- */
-static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler(
-       struct scic_sds_phy *sci_phy)
-{
-       u32 scu_sas_pcfg_value;
-
-       /* Release the spinup hold state and reset the OOB state machine */
-       scu_sas_pcfg_value =
-               readl(&sci_phy->link_layer_registers->phy_configuration);
-       scu_sas_pcfg_value &=
-               ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
-       scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
-       writel(scu_sas_pcfg_value,
-               &sci_phy->link_layer_registers->phy_configuration);
-
-       /* Now restart the OOB operation */
-       scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
-       scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
-       writel(scu_sas_pcfg_value,
-               &sci_phy->link_layer_registers->phy_configuration);
-
-       /* Change state to the final state this substate machine has run to completion */
-       sci_base_state_machine_change_state(&sci_phy->state_machine,
-                                           SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
-
-       return SCI_SUCCESS;
-}
-
-static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy,
-                                          const char *func)
-{
-       dev_dbg(sciphy_to_dev(sci_phy),
-                "%s: in wrong state: %d\n", func,
-                sci_base_state_machine_get_state(&sci_phy->state_machine));
-       return SCI_FAILURE_INVALID_STATE;
-}
-
-static enum sci_status
-scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy)
-{
-       return default_phy_handler(sci_phy, __func__);
-}
-
-
 enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy,
                                           u32 event_code)
 {
@@ -1059,287 +1026,71 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy,
        
 }
 
-
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = {
-       [SCI_BASE_PHY_STATE_INITIAL] = {
-               .consume_power_handler   = scic_sds_phy_default_consume_power_handler
-       },
-       [SCI_BASE_PHY_STATE_STOPPED]  = {
-               .consume_power_handler   = scic_sds_phy_default_consume_power_handler
-       },
-       [SCI_BASE_PHY_STATE_STARTING] = {
-               .consume_power_handler   = scic_sds_phy_default_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
-               .consume_power_handler  = scic_sds_phy_default_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
-               .consume_power_handler  = scic_sds_phy_default_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
-               .consume_power_handler  = scic_sds_phy_default_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
-               .consume_power_handler  = scic_sds_phy_default_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
-               .consume_power_handler  = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = {
-               .consume_power_handler  = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = {
-               .consume_power_handler  = scic_sds_phy_default_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = {
-               .consume_power_handler  = scic_sds_phy_default_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = {
-               .consume_power_handler  = scic_sds_phy_default_consume_power_handler
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = {
-               .consume_power_handler   = scic_sds_phy_default_consume_power_handler
-       },
-       [SCI_BASE_PHY_STATE_READY] = {
-               .consume_power_handler   = scic_sds_phy_default_consume_power_handler
-       },
-       [SCI_BASE_PHY_STATE_RESETTING] = {
-               .consume_power_handler   = scic_sds_phy_default_consume_power_handler
-       },
-       [SCI_BASE_PHY_STATE_FINAL] = {
-               .consume_power_handler   = scic_sds_phy_default_consume_power_handler
-       }
-};
-
-/*
- * ****************************************************************************
- * *  PHY STARTING SUBSTATE METHODS
- * **************************************************************************** */
-
-/**
- * scic_sds_phy_starting_initial_substate_enter -
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state
- * handlers are put in place for the struct scic_sds_phy object. - The state is
- * changed to the wait phy type event notification. none
- */
 static void scic_sds_phy_starting_initial_substate_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
-       scic_sds_phy_set_base_state_handlers(
-               sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
-
        /* This is just an temporary state go off to the starting state */
        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object)
-{
-       struct scic_sds_phy *sci_phy = object;
-
-       scic_sds_phy_set_base_state_handlers(
-               sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN
-               );
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_sas_speed_en_substate_enter(
-               void *object)
-{
-       struct scic_sds_phy *sci_phy = object;
-
-       scic_sds_phy_set_base_state_handlers(
-               sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN
-               );
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
-static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object)
-{
-       struct scic_sds_phy *sci_phy = object;
-
-       scic_sds_phy_set_base_state_handlers(
-               sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF
-               );
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the
- * struct scic_sds_phy object state handlers for this state. - Add this phy object to
- * the power control queue none
- */
 static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
+       struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
 
-       scic_sds_phy_set_base_state_handlers(
-               sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER
-               );
-
-       scic_sds_controller_power_control_queue_insert(
-               scic_sds_phy_get_controller(sci_phy),
-               sci_phy
-               );
+       scic_sds_controller_power_control_queue_insert(scic, sci_phy);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the
- * struct scic_sds_phy object from the power control queue. none
- */
 static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
+       struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
 
-       scic_sds_controller_power_control_queue_remove(
-               scic_sds_phy_get_controller(sci_phy), sci_phy
-               );
+       scic_sds_controller_power_control_queue_remove(scic, sci_phy);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the
- * struct scic_sds_phy object state handlers for this state. - Add this phy object to
- * the power control queue none
- */
 static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
+       struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
 
-       scic_sds_phy_set_base_state_handlers(
-               sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER
-               );
-
-       scic_sds_controller_power_control_queue_insert(
-               scic_sds_phy_get_controller(sci_phy),
-               sci_phy
-               );
+       scic_sds_controller_power_control_queue_insert(scic, sci_phy);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the
- * struct scic_sds_phy object from the power control queue. none
- */
 static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
+       struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
 
-       scic_sds_controller_power_control_queue_remove(
-               scic_sds_phy_get_controller(sci_phy),
-               sci_phy
-               );
+       scic_sds_controller_power_control_queue_remove(scic, sci_phy);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
 static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
-       scic_sds_phy_set_base_state_handlers(
-                       sci_phy,
-                       SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN);
-
        isci_timer_start(sci_phy->sata_timeout_timer,
                         SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy
- * on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
- * that was started on entry to await sata phy event notification none
- */
-static inline void scic_sds_phy_starting_await_sata_phy_substate_exit(
-               void *object)
+static void scic_sds_phy_starting_await_sata_phy_substate_exit(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
        isci_timer_stop(sci_phy->sata_timeout_timer);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the
- * struct scic_sds_phy object state handlers for this state. none
- */
 static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
-       scic_sds_phy_set_base_state_handlers(
-                       sci_phy,
-                       SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN);
-
        isci_timer_start(sci_phy->sata_timeout_timer,
                         SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the
- * struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer
- * that was started on entry to await sata phy event notification none
- */
-static inline void scic_sds_phy_starting_await_sata_speed_substate_exit(
+static void scic_sds_phy_starting_await_sata_speed_substate_exit(
        void *object)
 {
        struct scic_sds_phy *sci_phy = object;
@@ -1347,30 +1098,12 @@ static inline void scic_sds_phy_starting_await_sata_speed_substate_exit(
        isci_timer_stop(sci_phy->sata_timeout_timer);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the
- * struct scic_sds_phy object state handlers for this state.
- * - Start the SIGNATURE FIS
- * timeout timer none
- */
 static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object)
 {
-       bool continue_to_ready_state;
        struct scic_sds_phy *sci_phy = object;
 
-       scic_sds_phy_set_base_state_handlers(
-                       sci_phy,
-                       SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF);
-
-       continue_to_ready_state = scic_sds_port_link_detected(
-               sci_phy->owning_port,
-               sci_phy);
+       if (scic_sds_port_link_detected(sci_phy->owning_port, sci_phy)) {
 
-       if (continue_to_ready_state) {
                /*
                 * Clear the PE suspend condition so we can actually
                 * receive SIG FIS
@@ -1385,39 +1118,17 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object)
                sci_phy->is_in_link_training = false;
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the
- * struct scic_sds_phy on exiting
- * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE
- * FIS timeout timer. none
- */
-static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(
-       void *object)
+static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
        isci_timer_stop(sci_phy->sata_timeout_timer);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy
- * object state handlers for this state. - Change base state machine to the
- * ready state. none
- */
 static void scic_sds_phy_starting_final_substate_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
-       scic_sds_phy_set_base_state_handlers(sci_phy,
-                                                   SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL);
-
        /* State machine has run to completion so exit out and change
         * the base state machine to the ready state
         */
@@ -1425,11 +1136,6 @@ static void scic_sds_phy_starting_final_substate_enter(void *object)
                                            SCI_BASE_PHY_STATE_READY);
 }
 
-/*
- * ****************************************************************************
- * *  PHY STATE PRIVATE METHODS
- * **************************************************************************** */
-
 /**
  *
  * @sci_phy: This is the struct scic_sds_phy object to stop.
@@ -1511,49 +1217,17 @@ static void scu_link_layer_tx_hard_reset(
               &sci_phy->link_layer_registers->phy_configuration);
 }
 
-/*
- * ****************************************************************************
- * *  PHY BASE STATE METHODS
- * **************************************************************************** */
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
- * handlers for the phy object base state machine initial state. none
- */
-static void scic_sds_phy_initial_state_enter(void *object)
-{
-       struct scic_sds_phy *sci_phy = object;
-
-       scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This function will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state
- * handlers for the phy object base state machine initial state. - The SCU
- * hardware is requested to stop the protocol engine. none
- */
 static void scic_sds_phy_stopped_state_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
-       struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy);
+       struct scic_sds_port *sci_port = sci_phy->owning_port;
+       struct scic_sds_controller *scic = sci_port->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);
 
        /*
         * @todo We need to get to the controller to place this PE in a
         * reset state
         */
-
-       scic_sds_phy_set_base_state_handlers(sci_phy,
-                                            SCI_BASE_PHY_STATE_STOPPED);
-
        if (sci_phy->sata_timeout_timer != NULL) {
                isci_del_timer(ihost, sci_phy->sata_timeout_timer);
 
@@ -1562,32 +1236,16 @@ static void scic_sds_phy_stopped_state_enter(void *object)
 
        scu_link_layer_stop_protocol_engine(sci_phy);
 
-       if (sci_phy->state_machine.previous_state_id !=
-                       SCI_BASE_PHY_STATE_INITIAL)
-               scic_sds_controller_link_down(
-                               scic_sds_phy_get_controller(sci_phy),
-                               scic_sds_phy_get_port(sci_phy),
-                               sci_phy);
+       if (sci_phy->state_machine.previous_state_id != SCI_BASE_PHY_STATE_INITIAL)
+               scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy),
+                                             scic_sds_phy_get_port(sci_phy),
+                                             sci_phy);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state
- * handlers for the phy object base state machine starting state. - The SCU
- * hardware is requested to start OOB/SN on this protocl engine. - The phy
- * starting substate machine is started. - If the previous state was the ready
- * state then the struct scic_sds_controller is informed that the phy has gone link
- * down. none
- */
 static void scic_sds_phy_starting_state_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
-       scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING);
-
        scu_link_layer_stop_protocol_engine(sci_phy);
        scu_link_layer_start_oob(sci_phy);
 
@@ -1595,50 +1253,25 @@ static void scic_sds_phy_starting_state_enter(void *object)
        sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
        sci_phy->bcn_received_while_port_unassigned = false;
 
-       if (sci_phy->state_machine.previous_state_id
-           == SCI_BASE_PHY_STATE_READY) {
-               scic_sds_controller_link_down(
-                       scic_sds_phy_get_controller(sci_phy),
-                       scic_sds_phy_get_port(sci_phy),
-                       sci_phy
-                       );
-       }
+       if (sci_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY)
+               scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy),
+                                             scic_sds_phy_get_port(sci_phy),
+                                             sci_phy);
 
        sci_base_state_machine_change_state(&sci_phy->state_machine,
                                            SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state
- * handlers for the phy object base state machine ready state. - The SCU
- * hardware protocol engine is resumed. - The struct scic_sds_controller is informed
- * that the phy object has gone link up. none
- */
 static void scic_sds_phy_ready_state_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
-       scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY);
+       scic_sds_controller_link_up(scic_sds_phy_get_controller(sci_phy),
+                                   scic_sds_phy_get_port(sci_phy),
+                                   sci_phy);
 
-       scic_sds_controller_link_up(
-               scic_sds_phy_get_controller(sci_phy),
-               scic_sds_phy_get_port(sci_phy),
-               sci_phy
-               );
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on exiting
- * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware
- * protocol engine represented by this struct scic_sds_phy object. none
- */
 static void scic_sds_phy_ready_state_exit(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
@@ -1646,62 +1279,29 @@ static void scic_sds_phy_ready_state_exit(void *object)
        scic_sds_phy_suspend(sci_phy);
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state
- * handlers for the phy object base state machine resetting state. none
- */
 static void scic_sds_phy_resetting_state_enter(void *object)
 {
        struct scic_sds_phy *sci_phy = object;
 
-       scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING);
-
-       /*
-        * The phy is being reset, therefore deactivate it from the port.
-        * In the resetting state we don't notify the user regarding
-        * link up and link down notifications. */
+       /* The phy is being reset, therefore deactivate it from the port.  In
+        * the resetting state we don't notify the user regarding link up and
+        * link down notifications
+        */
        scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false);
 
        if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
                scu_link_layer_tx_hard_reset(sci_phy);
        } else {
-               /*
-                * The SCU does not need to have a discrete reset state so
+               /* The SCU does not need to have a discrete reset state so
                 * just go back to the starting state.
                 */
-               sci_base_state_machine_change_state(
-                               &sci_phy->state_machine,
-                               SCI_BASE_PHY_STATE_STARTING);
+               sci_base_state_machine_change_state(&sci_phy->state_machine,
+                                                   SCI_BASE_PHY_STATE_STARTING);
        }
 }
 
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_phy object.
- *
- * This method will perform the actions required by the struct scic_sds_phy on
- * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state
- * handlers for the phy object base state machine final state. none
- */
-static void scic_sds_phy_final_state_enter(void *object)
-{
-       struct scic_sds_phy *sci_phy = object;
-
-       scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL);
-
-       /* Nothing to do here */
-}
-
-/* --------------------------------------------------------------------------- */
-
 static const struct sci_base_state scic_sds_phy_state_table[] = {
-       [SCI_BASE_PHY_STATE_INITIAL] = {
-               .enter_state = scic_sds_phy_initial_state_enter,
-       },
+       [SCI_BASE_PHY_STATE_INITIAL] = { },
        [SCI_BASE_PHY_STATE_STOPPED] = {
                .enter_state = scic_sds_phy_stopped_state_enter,
        },
@@ -1711,15 +1311,9 @@ static const struct sci_base_state scic_sds_phy_state_table[] = {
        [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = {
                .enter_state = scic_sds_phy_starting_initial_substate_enter,
        },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = {
-               .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter,
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = {
-               .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter,
-       },
-       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = {
-               .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter,
-       },
+       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { },
+       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { },
+       [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { },
        [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = {
                .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter,
                .exit_state  = scic_sds_phy_starting_await_sas_power_substate_exit,
@@ -1750,9 +1344,7 @@ static const struct sci_base_state scic_sds_phy_state_table[] = {
        [SCI_BASE_PHY_STATE_RESETTING] = {
                .enter_state = scic_sds_phy_resetting_state_enter,
        },
-       [SCI_BASE_PHY_STATE_FINAL] = {
-               .enter_state = scic_sds_phy_final_state_enter,
-       },
+       [SCI_BASE_PHY_STATE_FINAL] = { },
 };
 
 void scic_sds_phy_construct(struct scic_sds_phy *sci_phy,
index a95c74e..5770855 100644 (file)
@@ -140,8 +140,6 @@ struct scic_sds_phy {
         */
        void *sata_timeout_timer;
 
-       const struct scic_sds_phy_state_handler *state_handlers;
-
        /**
         * This field is the pointer to the transport layer register for the SCU
         * hardware.
@@ -504,20 +502,6 @@ enum scic_sds_phy_states {
        SCI_BASE_PHY_STATE_FINAL,
 };
 
-
-typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *);
-typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32);
-typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32);
-typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *);
-
-struct scic_sds_phy_state_handler {
-       /**
-        * The state handler for staggered spinup.
-        */
-       scic_sds_phy_power_handler_t consume_power_handler;
-
-};
-
 /**
  * scic_sds_phy_get_index() -
  *
@@ -535,26 +519,6 @@ struct scic_sds_phy_state_handler {
 #define scic_sds_phy_get_controller(phy) \
        (scic_sds_port_get_controller((phy)->owning_port))
 
-/**
- * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for
- *    this phy object
- *
- *
- */
-#define scic_sds_phy_set_state_handlers(phy, handlers) \
-       ((phy)->state_handlers = (handlers))
-
-/**
- * scic_sds_phy_set_base_state_handlers() -
- *
- * This macro set the base state handlers for the phy object.
- */
-#define scic_sds_phy_set_base_state_handlers(phy, state_id) \
-       scic_sds_phy_set_state_handlers(\
-               (phy), \
-               &scic_sds_phy_state_handler_table[(state_id)] \
-               )
-
 void scic_sds_phy_construct(
        struct scic_sds_phy *this_phy,
        struct scic_sds_port *owning_port,