cpu: imx8_cpu: Print Speed grade if IMX_TMU

Much of the data that is display by imx8_cpu.c is also displayed from
arch/arm/mach-imx/cpu.c, except the temperature grade and active
temperature are only displayed when SoC is an i.MX9. Since IMX9 now
implies IMX_TMU, change this to check for IMX_TMU in the same way
it's done in mach-imx/cpu.c to enable displaying this information
for any SoC with either of this config enabled.
Since additional text may appear due to this commit, remove
the extra space in the message displaying the temperature
grade.

Before:
CPU:   NXP i.MX8MP Rev1.1 A53 at 1200 MHz
Model: Beacon EmbeddedWorks i.MX8MPlus Development kit

After:
CPU:   NXP i.MX8MP Rev1.1 A53 at 1200 MHz
CPU:   Industrial temperature grade (-40C to 105C) at 28C
Model: Beacon EmbeddedWorks i.MX8MPlus Development kit

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c
index 39b3c19..4e1ecca 100644 (file)
--- a/drivers/cpu/imx8_cpu.c
+++ b/drivers/cpu/imx8_cpu.c
@@ -215,19 +215,19 @@ static int cpu_imx_get_desc(const struct udevice *dev, char *buf, int size)
        ret = snprintf(buf, size, "NXP i.MX%s Rev%s %s at %u MHz",
                       plat->type, plat->rev, plat->name, plat->freq_mhz);
 
-       if (IS_ENABLED(CONFIG_IMX9)) {
+       if (IS_ENABLED(CONFIG_IMX_TMU)) {
                switch (get_cpu_temp_grade(&minc, &maxc)) {
                case TEMP_AUTOMOTIVE:
-                       grade = "Automotive temperature grade ";
+                       grade = "Automotive temperature grade";
                        break;
                case TEMP_INDUSTRIAL:
-                       grade = "Industrial temperature grade ";
+                       grade = "Industrial temperature grade";
                        break;
                case TEMP_EXTCOMMERCIAL:
-                       grade = "Extended Consumer temperature grade ";
+                       grade = "Extended Consumer temperature grade";
                        break;
                default:
-                       grade = "Consumer temperature grade ";
+                       grade = "Consumer temperature grade";
                        break;
                }