arm: Rename STM32MP13x

CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 89c2986..9542303 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1361,7 +1361,7 @@ dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
 
 dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
 
-dtb-$(CONFIG_STM32MP13x) += \
+dtb-$(CONFIG_STM32MP13X) += \
        stm32mp135f-dk.dtb
 
 dtb-$(CONFIG_STM32MP15x) += \

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 5fc92d0..241fcf3 100644 (file)
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -37,7 +37,7 @@ choice
        prompt "Select STMicroelectronics STM32MPxxx Soc"
        default STM32MP15x
 
-config STM32MP13x
+config STM32MP13X
        bool "Support STMicroelectronics STM32MP13x Soc"
        select ARM_SMCCC
        select CPU_V7A
@@ -127,7 +127,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
 
 config STM32_ETZPC
        bool "STM32 Extended TrustZone Protection"
-       depends on STM32MP15x || STM32MP13x
+       depends on STM32MP15x || STM32MP13X
        default y
        imply BOOTP_SERVERIP
        help

diff --git a/arch/arm/mach-stm32mp/Kconfig.13x b/arch/arm/mach-stm32mp/Kconfig.13x
index acc02a5..4d74b35 100644 (file)
--- a/arch/arm/mach-stm32mp/Kconfig.13x
+++ b/arch/arm/mach-stm32mp/Kconfig.13x
@@ -1,10 +1,10 @@
-if STM32MP13x
+if STM32MP13X
 
 choice
        prompt "STM32MP13x board select"
        optional
 
-config TARGET_ST_STM32MP13x
+config TARGET_ST_STM32MP13X
        bool "STMicroelectronics STM32MP13x boards"
        imply BOOTSTAGE
        imply CMD_BOOTSTAGE

diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index fdcbbf9..3d194de 100644 (file)
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -9,7 +9,7 @@ obj-y += bsec.o
 obj-y += soc.o
 
 obj-$(CONFIG_STM32MP15x) += stm32mp1/
-obj-$(CONFIG_STM32MP13x) += stm32mp1/
+obj-$(CONFIG_STM32MP13X) += stm32mp1/
 obj-$(CONFIG_STM32MP25X) += stm32mp2/
 
 obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o

diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c b/arch/arm/mach-stm32mp/cmd_stm32key.c
index e16fcf4..dcef6ac 100644 (file)
--- a/arch/arm/mach-stm32mp/cmd_stm32key.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32key.c
@@ -19,7 +19,7 @@
  * STM32MP13x: 0b111111 = 0x3F for OTP_SECURED closed device
  */
 #define STM32_OTP_CLOSE_ID             0
-#define STM32_OTP_STM32MP13x_CLOSE_MASK        0x3F
+#define STM32_OTP_STM32MP13X_CLOSE_MASK        0x3F
 #define STM32_OTP_STM32MP15x_CLOSE_MASK        BIT(6)
 
 /* PKH is the first element of the key list */
@@ -61,7 +61,7 @@ static u8 stm32key_index;
 
 static u8 get_key_nb(void)
 {
-       if (IS_ENABLED(CONFIG_STM32MP13x))
+       if (IS_ENABLED(CONFIG_STM32MP13X))
                return ARRAY_SIZE(stm32mp13_list);
 
        if (IS_ENABLED(CONFIG_STM32MP15x))
@@ -70,7 +70,7 @@ static u8 get_key_nb(void)
 
 static const struct stm32key *get_key(u8 index)
 {
-       if (IS_ENABLED(CONFIG_STM32MP13x))
+       if (IS_ENABLED(CONFIG_STM32MP13X))
                return &stm32mp13_list[index];
 
        if (IS_ENABLED(CONFIG_STM32MP15x))
@@ -79,8 +79,8 @@ static const struct stm32key *get_key(u8 index)
 
 static u32 get_otp_close_mask(void)
 {
-       if (IS_ENABLED(CONFIG_STM32MP13x))
-               return STM32_OTP_STM32MP13x_CLOSE_MASK;
+       if (IS_ENABLED(CONFIG_STM32MP13X))
+               return STM32_OTP_STM32MP13X_CLOSE_MASK;
 
        if (IS_ENABLED(CONFIG_STM32MP15x))
                return STM32_OTP_STM32MP15x_CLOSE_MASK;

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
index eda98eb..934ffb1 100644 (file)
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
@@ -30,7 +30,7 @@
 #endif
 /* size of the OTP struct in NVMEM PTA */
 #define _OTP_SIZE_TA(otp)      (((otp) * 2 + 2) * 4)
-#if defined(CONFIG_STM32MP13x) || defined(CONFIG_STM32MP15x)
+#if defined(CONFIG_STM32MP13X) || defined(CONFIG_STM32MP15x)
 /* STM32MP1 with BSEC2 */
 #define OTP_SIZE_TA            _OTP_SIZE_TA(96)
 #else

diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 726c390..2d7d973 100644 (file)
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -71,7 +71,7 @@ enum forced_boot_mode {
  * only address used before device tree parsing
  */
 
-#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13x)
+#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13X)
 #define STM32_RCC_BASE                 0x50000000
 #define STM32_PWR_BASE                 0x50001000
 #define STM32_SYSCFG_BASE              0x50020000
@@ -92,7 +92,7 @@ enum forced_boot_mode {
 #define STM32_USART1_BASE              0x5C000000
 #define STM32_USART2_BASE              0x4000E000
 #endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
 #define STM32_USART1_BASE              0x4c000000
 #define STM32_USART2_BASE              0x4c001000
 #endif
@@ -149,7 +149,7 @@ enum forced_boot_mode {
 #define TAMP_COPRO_STATE_CRASH         5
 #endif
 
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
 #define TAMP_BOOTCOUNT                 TAMP_BACKUP_REGISTER(31)
 #define TAMP_BOOT_CONTEXT              TAMP_BACKUP_REGISTER(30)
 #endif
@@ -188,7 +188,7 @@ enum forced_boot_mode {
 #define BSEC_OTP_MAC   57
 #define BSEC_OTP_BOARD 59
 #endif
-#ifdef CONFIG_STM32MP13x
+#ifdef CONFIG_STM32MP13X
 #define BSEC_OTP_RPN   1
 #define BSEC_OTP_SERIAL        13
 #define BSEC_OTP_MAC   57

diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile
index 94c7724..e74342d 100644 (file)
--- a/arch/arm/mach-stm32mp/stm32mp1/Makefile
+++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile
@@ -5,7 +5,7 @@
 
 obj-y += cpu.o
 
-obj-$(CONFIG_STM32MP13x) += stm32mp13x.o
+obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
 obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
 
 obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o

diff --git a/arch/arm/mach-stm32mp/stm32mp1/fdt.c b/arch/arm/mach-stm32mp/stm32mp1/fdt.c
index de5c5a5..9436b87 100644 (file)
--- a/arch/arm/mach-stm32mp/stm32mp1/fdt.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/fdt.c
@@ -270,7 +270,7 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node)
        int offset, shift;
        u32 addr, status, decprot[ETZPC_DECPROT_NB];
 
-       if (IS_ENABLED(CONFIG_STM32MP13x)) {
+       if (IS_ENABLED(CONFIG_STM32MP13X)) {
                array = stm32mp13_ip_addr;
                array_size = ARRAY_SIZE(stm32mp13_ip_addr);
        }
@@ -491,7 +491,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
        cpu = get_cpu_type();
        get_soc_name(name);
 
-       if (IS_ENABLED(CONFIG_STM32MP13x))
+       if (IS_ENABLED(CONFIG_STM32MP13X))
                stm32mp13_fdt_fixup(blob, soc, cpu, name);
 
        if (IS_ENABLED(CONFIG_STM32MP15x)) {

diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
index f40d1a7..6d1b76b 100644 (file)
--- a/board/st/common/Kconfig
+++ b/board/st/common/Kconfig
@@ -1,7 +1,7 @@
 config CMD_STBOARD
        bool "stboard - command for OTP board information"
        depends on ARCH_STM32MP
-       default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x
+       default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13X
        help
          This compile the stboard command to
          read and write the board in the OTP.

diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
index 6ab8f80..7d0d41b 100644 (file)
--- a/board/st/stm32mp1/Kconfig
+++ b/board/st/stm32mp1/Kconfig
@@ -12,7 +12,7 @@ config SYS_CONFIG_NAME
 source "board/st/common/Kconfig"
 endif
 
-if TARGET_ST_STM32MP13x
+if TARGET_ST_STM32MP13X
 
 config SYS_BOARD
        default "stm32mp1"

diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index 2d79bf0..c893e27 100644 (file)
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -5,10 +5,10 @@ CONFIG_SYS_MALLOC_F_LEN=0x180000
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0400000
 CONFIG_ENV_OFFSET=0x900000
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dk"
-CONFIG_STM32MP13x=y
+CONFIG_STM32MP13X=y
 CONFIG_DDR_CACHEABLE_SIZE=0x8000000
 CONFIG_CMD_STM32KEY=y
-CONFIG_TARGET_ST_STM32MP13x=y
+CONFIG_TARGET_ST_STM32MP13X=y
 CONFIG_ENV_OFFSET_REDUND=0x940000
 CONFIG_CMD_STM32PROG=y
 # CONFIG_ARMV7_NONSEC is not set

diff --git a/drivers/clk/stm32/Kconfig b/drivers/clk/stm32/Kconfig
index 7a34ea2..7dbddd0 100644 (file)
--- a/drivers/clk/stm32/Kconfig
+++ b/drivers/clk/stm32/Kconfig
@@ -31,7 +31,7 @@ config CLK_STM32MP1
 config CLK_STM32MP13
        bool "Enable RCC clock driver for STM32MP13"
        depends on ARCH_STM32MP && CLK
-       default y if STM32MP13x
+       default y if STM32MP13X
        select CLK_STM32_CORE
        help
          Enable the STM32 clock (RCC) driver. Enable support for