rockchip: rk3399-rockpro64: Sync DT from v6.8 and update defconfig

Sync rk3399-rockpro64 device tree from Linux kernel v6.8.

Add SF_DEFAULT_SPEED=10000000 and SPI_FLASH_SFDP_SUPPORT=y to improve
support for booting from SPI flash.

Remove USE_PREBOOT=y to speed up booting, standard boot will init USB
after faster boot media has been evaluated.

Add CMD_POWEROFF=y to support poweroff using cmdline and power on using
the pwr button on the board.

Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.

Remove SPL_TINY_MEMSET=y to use full memset in SPL.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi
index 6bff8db..f30b82a 100644 (file)
--- a/arch/arm/dts/rk3399-rockpro64.dtsi
+++ b/arch/arm/dts/rk3399-rockpro64.dtsi
@@ -11,6 +11,7 @@
 
 / {
        aliases {
+               ethernet0 = &gmac;
                mmc0 = &sdio0;
                mmc1 = &sdmmc;
                mmc2 = &sdhci;
@@ -20,6 +21,15 @@
                stdout-path = "serial2:1500000n8";
        };
 
+       /* enable for panel backlight support */
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <5>;
+               pwms = <&pwm0 0 1000000 0>;
+               status = "disabled";
+       };
+
        clkin_gmac: external-gmac-clock {
                compatible = "fixed-clock";
                clock-frequency = <125000000>;
@@ -33,7 +43,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pwrbtn>;
 
-               power {
+               key-power {
                        debounce-interval = <100>;
                        gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
                        label = "GPIO Key Power";
@@ -69,6 +79,7 @@
 
        fan: pwm-fan {
                compatible = "pwm-fan";
+               cooling-levels = <0 100 150 200 255>;
                #cooling-cells = <2>;
                fan-supply = <&vcc12v_dcin>;
                pwms = <&pwm1 0 50000 0>;
@@ -106,6 +117,14 @@
                };
        };
 
+       avdd: avdd-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "avdd";
+               regulator-min-microvolt = <11000000>;
+               regulator-max-microvolt = <11000000>;
+               vin-supply = <&vcc3v3_s0>;
+       };
+
        vcc12v_dcin: vcc12v-dcin {
                compatible = "regulator-fixed";
                regulator-name = "vcc12v_dcin";
@@ -212,12 +231,12 @@
        vdd_log: vdd-log {
                compatible = "pwm-regulator";
                pwms = <&pwm2 0 25000 1>;
+               pwm-supply = <&vcc5v0_sys>;
                regulator-name = "vdd_log";
                regulator-always-on;
                regulator-boot-on;
                regulator-min-microvolt = <800000>;
                regulator-max-microvolt = <1700000>;
-               vin-supply = <&vcc5v0_sys>;
        };
 };
 
@@ -245,6 +264,34 @@
        cpu-supply = <&vdd_cpu_b>;
 };
 
+&cpu_thermal {
+       trips {
+               cpu_warm: cpu_warm {
+                       temperature = <55000>;
+                       hysteresis = <2000>;
+                       type = "active";
+               };
+
+               cpu_hot: cpu_hot {
+                       temperature = <65000>;
+                       hysteresis = <2000>;
+                       type = "active";
+               };
+       };
+
+       cooling-maps {
+               map2 {
+                       trip = <&cpu_warm>;
+                       cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+               };
+
+               map3 {
+                       trip = <&cpu_hot>;
+                       cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+               };
+       };
+};
+
 &emmc_phy {
        status = "okay";
 };
@@ -371,8 +418,6 @@
 
                        vcc3v0_touch: LDO_REG2 {
                                regulator-name = "vcc3v0_touch";
-                               regulator-always-on;
-                               regulator-boot-on;
                                regulator-min-microvolt = <3000000>;
                                regulator-max-microvolt = <3000000>;
                                regulator-state-mem {
@@ -461,8 +506,6 @@
 
                        vcc3v3_s0: SWITCH_REG2 {
                                regulator-name = "vcc3v3_s0";
-                               regulator-always-on;
-                               regulator-boot-on;
                                regulator-state-mem {
                                        regulator-off-in-suspend;
                                };
@@ -536,6 +579,19 @@
                vbus-supply = <&vcc5v0_typec>;
                status = "okay";
        };
+
+       /* enable for pine64 touch screen support */
+       touch: touchscreen@5d {
+               compatible = "goodix,gt911";
+               reg = <0x5d>;
+               interrupt-parent = <&gpio4>;
+               interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+               AVDD28-supply = <&vcc3v0_touch>;
+               VDDIO-supply = <&vcc3v0_touch>;
+               irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+               status = "disabled";
+       };
 };
 
 &i2s0 {
@@ -571,6 +627,36 @@
        gpio1830-supply = <&vcc_3v0>;
 };
 
+/* enable for pine64 panel display support */
+&mipi_dsi {
+       clock-master;
+       status = "disabled";
+
+       ports {
+               mipi_out: port@1 {
+                       reg = <1>;
+
+                       mipi_out_panel: endpoint {
+                               remote-endpoint = <&mipi_in_panel>;
+                       };
+               };
+       };
+
+       mipi_panel: panel@0 {
+               compatible = "feiyang,fy07024di26a30d";
+               reg = <0>;
+               avdd-supply = <&avdd>;
+               backlight = <&backlight>;
+               dvdd-supply = <&vcc3v3_s0>;
+
+               port {
+                       mipi_in_panel: endpoint {
+                               remote-endpoint = <&mipi_out_panel>;
+                       };
+               };
+       };
+};
+
 &pcie0 {
        ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
        num-lanes = <4>;

diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
index 173f8f7..4e1af37 100644 (file)
--- a/configs/rockpro64-rk3399_defconfig
+++ b/configs/rockpro64-rk3399_defconfig
@@ -4,6 +4,7 @@ CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
@@ -20,7 +21,6 @@ CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
@@ -34,6 +34,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
@@ -57,7 +58,10 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_SF_DEFAULT_BUS=1
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
 CONFIG_NVME_PCI=y
@@ -96,5 +100,4 @@ CONFIG_VIDEO=y
 CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
-CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y