i2c: lpc2k: add driver

Add support for the I2C controller found on several NXP devices
including LPC2xxx, LPC178x/7x and LPC18xx/43xx. The controller
is implemented as a state machine and the driver act upon the
state changes when the bus is accessed.

The I2C controller supports master/slave operation, bus
arbitration, programmable clock rate, and speeds up to 1 Mbit/s.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
new file mode 100644 (file)
index 0000000..4101aa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
@@ -0,0 +1,33 @@
+NXP I2C controller for LPC2xxx/178x/18xx/43xx
+
+Required properties:
+ - compatible: must be "nxp,lpc1788-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+
+Optional properties:
+- clock-frequency: the desired I2C bus clock frequency in Hz; in
+  absence of this property the default value is used (100 kHz).
+
+Example:
+i2c0: i2c@400a1000 {
+       compatible = "nxp,lpc1788-i2c";
+       reg = <0x400a1000 0x1000>;
+       interrupts = <18>;
+       clocks = <&ccu1 CLK_APB1_I2C0>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+};
+
+&i2c0 {
+       clock-frequency = <400000>;
+
+       lm75@48 {
+               compatible = "nxp,lm75";
+               reg = <0x48>;
+       };
+};
+

diff --cc drivers/i2c/busses/Kconfig
Simple merge

diff --cc drivers/i2c/busses/Makefile
Simple merge

diff --cc drivers/i2c/busses/i2c-lpc2k.c
Simple merge