video: Enable VIDEO_DAMAGE for drivers that need it

Some drivers call video_set_flush_dcache() to indicate that they want to
have the dcache flushed for the frame buffer. These drivers benefit from
our new video damage control, because we can reduce the amount of memory
that gets flushed significantly.

This patch enables video damage control for all device drivers that call
video_set_flush_dcache() to make sure they benefit from it.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
[Alper: Add to VIDEO_TIDSS, imply instead of select]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index a175e5c..b50b8a5 100644 (file)
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -95,6 +95,7 @@ config TARGET_OMAP3_LOGIC
        select OMAP3_GPIO_4
        select OMAP3_GPIO_6
        imply CMD_DM
+       imply VIDEO_DAMAGE
 
 config TARGET_TAO3530
        bool "TAO3530"

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index fce817c..1717959 100644 (file)
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -836,6 +836,7 @@ config VIDEO_SUNXI
        depends on !SUNXI_GEN_NCAT2
        select VIDEO
        select DISPLAY
+       imply VIDEO_DAMAGE
        imply VIDEO_DT_SIMPLEFB
        default y
        ---help---

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4e5a3dc..80508fb 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -513,6 +513,7 @@ config VIDEO_LCD_ANX9804
 
 config ATMEL_LCD
        bool "Atmel LCD panel support"
+       imply VIDEO_DAMAGE
        depends on ARCH_AT91
 
 config ATMEL_LCD_BGR555
@@ -522,6 +523,7 @@ config ATMEL_LCD_BGR555
 
 config VIDEO_BCM2835
        bool "Display support for BCM2835"
+       imply VIDEO_DAMAGE
        help
          The graphics processor already sets up the display so this driver
          simply checks the resolution and then sets up the frame buffer with
@@ -713,6 +715,7 @@ source "drivers/video/meson/Kconfig"
 
 config VIDEO_MVEBU
        bool "Armada XP LCD controller"
+       imply VIDEO_DAMAGE
        ---help---
        Support for the LCD controller integrated in the Marvell
        Armada XP SoC.
@@ -753,6 +756,7 @@ config NXP_TDA19988
 
 config ATMEL_HLCD
        bool "Enable ATMEL video support using HLCDC"
+       imply VIDEO_DAMAGE
        help
           HLCDC supports video output to an attached LCD panel.
 
@@ -854,6 +858,7 @@ source "drivers/video/imx/Kconfig"
 
 config VIDEO_MXS
        bool "Enable video support on i.MX28/i.MX6UL/i.MX7 SoCs"
+       imply VIDEO_DAMAGE
        help
          Enable framebuffer driver for i.MX28/i.MX6UL/i.MX7 processors
 
@@ -916,6 +921,7 @@ config VIDEO_DW_MIPI_DSI
 
 config VIDEO_SIMPLE
        bool "Simple display driver for preconfigured display"
+       imply VIDEO_DAMAGE
        help
          Enables a simple generic display driver which utilizes the
          simple-framebuffer devicetree bindings.
@@ -934,6 +940,7 @@ config VIDEO_DT_SIMPLEFB
 
 config VIDEO_MCDE_SIMPLE
        bool "Simple driver for ST-Ericsson MCDE with preconfigured display"
+       imply VIDEO_DAMAGE
        help
          Enables a simple display driver for ST-Ericsson MCDE
          (Multichannel Display Engine), which reads the configuration from

diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig
index 599d19d..a2cf752 100644 (file)
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/exynos/Kconfig
@@ -12,6 +12,7 @@ config EXYNOS_DP
 
 config EXYNOS_FB
        bool "Exynos FIMD support"
+       imply VIDEO_DAMAGE
 
 config EXYNOS_MIPI_DSIM
        bool "Exynos MIPI DSI support"

diff --git a/drivers/video/imx/Kconfig b/drivers/video/imx/Kconfig
index 12f11c2..4a1927c 100644 (file)
--- a/drivers/video/imx/Kconfig
+++ b/drivers/video/imx/Kconfig
@@ -2,6 +2,7 @@
 config VIDEO_IPUV3
        bool "i.MX IPUv3 Core video support"
        depends on VIDEO && (MX5 || MX6)
+       imply VIDEO_DAMAGE
        help
          This enables framebuffer driver for i.MX processors working
          on the IPUv3(Image Processing Unit) internal graphic processor.

diff --git a/drivers/video/meson/Kconfig b/drivers/video/meson/Kconfig
index 3c2d72d..fcf486c 100644 (file)
--- a/drivers/video/meson/Kconfig
+++ b/drivers/video/meson/Kconfig
@@ -8,5 +8,6 @@ config VIDEO_MESON
        bool "Enable Amlogic Meson video support"
        depends on VIDEO
        select DISPLAY
+       imply VIDEO_DAMAGE
        help
          Enable Amlogic Meson Video Processing Unit video support.

diff --git a/drivers/video/rockchip/Kconfig b/drivers/video/rockchip/Kconfig
index 01804dc..0f4550a 100644 (file)
--- a/drivers/video/rockchip/Kconfig
+++ b/drivers/video/rockchip/Kconfig
@@ -11,6 +11,7 @@
 menuconfig VIDEO_ROCKCHIP
        bool "Enable Rockchip Video Support"
        depends on VIDEO
+       imply VIDEO_DAMAGE
        help
          Rockchip SoCs provide video output capabilities for High-Definition
          Multimedia Interface (HDMI), Low-voltage Differential Signalling

diff --git a/drivers/video/stm32/Kconfig b/drivers/video/stm32/Kconfig
index 4806606..c354c40 100644 (file)
--- a/drivers/video/stm32/Kconfig
+++ b/drivers/video/stm32/Kconfig
@@ -8,6 +8,7 @@
 menuconfig VIDEO_STM32
        bool "Enable STM32 video support"
        depends on VIDEO
+       imply VIDEO_DAMAGE
        help
          STM32 supports many video output options including RGB and
          DSI. This option enables these supports which can be used on

diff --git a/drivers/video/tegra/Kconfig b/drivers/video/tegra/Kconfig
index d3b8dbb..1a32840 100644 (file)
--- a/drivers/video/tegra/Kconfig
+++ b/drivers/video/tegra/Kconfig
@@ -44,6 +44,7 @@ config TEGRA_BACKLIGHT_PWM
 
 config VIDEO_TEGRA124
        bool "Enable video support on Tegra124"
+       imply VIDEO_DAMAGE
        help
           Tegra124 supports many video output options including eDP and
           HDMI. At present only eDP is supported by U-Boot. This option

diff --git a/drivers/video/tidss/Kconfig b/drivers/video/tidss/Kconfig
index 95086f3..3291b3c 100644 (file)
--- a/drivers/video/tidss/Kconfig
+++ b/drivers/video/tidss/Kconfig
@@ -11,6 +11,7 @@
 menuconfig VIDEO_TIDSS
        bool "Enable TIDSS video support"
        depends on VIDEO
+       imply VIDEO_DAMAGE
        help
          TIDSS supports  video output options LVDS and
          DPI . This option enables these supports which can be used on