[ALSA] hda-intel - Add single_cmd option for debugging

Modules: Documentation,HDA Intel driver

Added single_cmd module option for debugging in the case CORB/RIRB
doesn't work well (e.g. due to wrong irq routings).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 36b511c..cc8a701 100644 (file)
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -671,6 +671,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     model      - force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
+    single_cmd  - Use single immediate commands to communicate with
+               codecs (for debugging only)
 
     This module supports one card and autoprobe.
 
@@ -723,6 +725,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
            (Usually SD_LPLIB register is more accurate than the
            position buffer.)
 
+    NB: If you get many "azx_get_response timeout" messages at
+    loading, it's likely a problem of interrupts (e.g. ACPI irq
+    routing).  Try to boot with options like "pci=noacpi".  Also, you
+    can try "single_cmd=1" module option.  This will switch the
+    communication method between HDA controller and codecs to the
+    single immediate commands instead of CORB/RIRB.  Basically, the
+    single command mode is provided only for BIOS, and you won't get
+    unsolicited events, too.  But, at least, this works independently
+    from the irq.  Remember this is a last resort, and should be
+    avoided as much as possible...
+    
     The power-management is supported.
 
   Module snd-hdsp

diff --cc sound/pci/hda/hda_intel.c
Simple merge