ASoC: Support Speyside build variants with WM8962 fitted

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index d155cbb..b5d7c0d 100644 (file)
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -177,3 +177,9 @@ config SND_SOC_SPEYSIDE
        select SND_SAMSUNG_I2S
        select SND_SOC_WM8915
        select SND_SOC_WM9081
+
+config SND_SOC_SPEYSIDE_WM8962
+       tristate "Audio support for Wolfson Speyside with WM8962"
+       depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
+       select SND_SAMSUNG_I2S
+       select SND_SOC_WM8962

diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 683843a..e04df65 100644 (file)
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -36,6 +36,7 @@ snd-soc-goni-wm8994-objs := goni_wm8994.o
 snd-soc-smdk-spdif-objs := smdk_spdif.o
 snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o
 snd-soc-speyside-objs := speyside.o
+snd-soc-speyside-wm8962-objs := speyside_wm8962.o
 
 obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -55,3 +56,4 @@ obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
 obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
 obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o
 obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o
+obj-$(CONFIG_SND_SOC_SPEYSIDE_WM8962) += snd-soc-speyside-wm8962.o

diff --git a/sound/soc/samsung/speyside_wm8962.c b/sound/soc/samsung/speyside_wm8962.c
new file mode 100644 (file)
index 0000000..c0ba0bf
--- /dev/null
+++ b/sound/soc/samsung/speyside_wm8962.c
@@ -0,0 +1,260 @@
+/*
+ * Speyside with WM8962 audio support
+ *
+ * Copyright 2011 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/gpio.h>
+
+#include "../codecs/wm8962.h"
+
+static int speyside_wm8962_set_bias_level(struct snd_soc_card *card,
+                                         struct snd_soc_dapm_context *dapm,
+                                         enum snd_soc_bias_level level)
+{
+       struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+       int ret;
+
+       switch (level) {
+       case SND_SOC_BIAS_PREPARE:
+               if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
+                       ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
+                                                 WM8962_FLL_MCLK, 32768,
+                                                 44100 * 256);
+                       if (ret < 0)
+                               pr_err("Failed to start FLL\n");
+
+                       ret = snd_soc_dai_set_sysclk(codec_dai,
+                                                    WM8962_SYSCLK_FLL,
+                                                    44100 * 256,
+                                                    SND_SOC_CLOCK_IN);
+                       if (ret < 0)
+                               return ret;
+               }
+               break;
+
+       default:
+               break;
+       }
+
+       return 0;
+}
+
+static int speyside_wm8962_set_bias_level_post(struct snd_soc_card *card,
+                                              struct snd_soc_dapm_context *dapm,
+                                              enum snd_soc_bias_level level)
+{
+       struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+       int ret;
+
+       switch (level) {
+       case SND_SOC_BIAS_STANDBY:
+               ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
+                                            32768, SND_SOC_CLOCK_IN);
+               if (ret < 0)
+                       return ret;
+
+               ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
+                                         0, 0, 0);
+               if (ret < 0) {
+                       pr_err("Failed to stop FLL\n");
+                       return ret;
+               }
+               break;
+
+       default:
+               break;
+       }
+
+       dapm->bias_level = level;
+
+       return 0;
+}
+
+static int speyside_wm8962_hw_params(struct snd_pcm_substream *substream,
+                             struct snd_pcm_hw_params *params)
+{
+       struct snd_soc_pcm_runtime *rtd = substream->private_data;
+       struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+       struct snd_soc_dai *codec_dai = rtd->codec_dai;
+       int ret;
+
+       ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+                                        | SND_SOC_DAIFMT_NB_NF
+                                        | SND_SOC_DAIFMT_CBM_CFM);
+       if (ret < 0)
+               return ret;
+
+       ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
+                                        | SND_SOC_DAIFMT_NB_NF
+                                        | SND_SOC_DAIFMT_CBM_CFM);
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
+
+static struct snd_soc_ops speyside_wm8962_ops = {
+       .hw_params = speyside_wm8962_hw_params,
+};
+
+static struct snd_soc_dai_link speyside_wm8962_dai[] = {
+       {
+               .name = "CPU",
+               .stream_name = "CPU",
+               .cpu_dai_name = "samsung-i2s.0",
+               .codec_dai_name = "wm8962",
+               .platform_name = "samsung-audio",
+               .codec_name = "wm8962.1-001a",
+               .ops = &speyside_wm8962_ops,
+       },
+};
+
+static const struct snd_kcontrol_new controls[] = {
+       SOC_DAPM_PIN_SWITCH("Main Speaker"),
+};
+
+static struct snd_soc_dapm_widget widgets[] = {
+       SND_SOC_DAPM_HP("Headphone", NULL),
+       SND_SOC_DAPM_MIC("Headset Mic", NULL),
+
+       SND_SOC_DAPM_MIC("DMIC", NULL),
+
+       SND_SOC_DAPM_SPK("Main Speaker", NULL),
+};
+
+static struct snd_soc_dapm_route audio_paths[] = {
+       { "Headphone", NULL, "HPOUTL" },
+       { "Headphone", NULL, "HPOUTR" },
+
+       { "Main Speaker", NULL, "SPKOUTL" },
+       { "Main Speaker", NULL, "SPKOUTR" },
+
+       { "MICBIAS", NULL, "Headset Mic" },
+       { "IN4L", NULL, "MICBIAS" },
+       { "IN4R", NULL, "MICBIAS" },
+
+       { "MICBIAS", NULL, "DMIC" },
+       { "DMICDAT", NULL, "MICBIAS" },
+};
+
+static struct snd_soc_jack speyside_wm8962_headset;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin speyside_wm8962_headset_pins[] = {
+       {
+               .pin = "Headset Mic",
+               .mask = SND_JACK_MICROPHONE,
+       },
+       {
+               .pin = "Headphone",
+               .mask = SND_JACK_MICROPHONE,
+       },
+};
+
+static int speyside_wm8962_late_probe(struct snd_soc_card *card)
+{
+       struct snd_soc_codec *codec = card->rtd[0].codec;
+       struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+       int ret;
+
+       ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
+                                    32768, SND_SOC_CLOCK_IN);
+       if (ret < 0)
+               return ret;
+
+       ret = snd_soc_jack_new(codec, "Headset",
+                              SND_JACK_HEADSET | SND_JACK_BTN_0,
+                              &speyside_wm8962_headset);
+       if (ret)
+               return ret;
+
+       ret = snd_soc_jack_add_pins(&speyside_wm8962_headset,
+                                   ARRAY_SIZE(speyside_wm8962_headset_pins),
+                                   speyside_wm8962_headset_pins);
+       if (ret)
+               return ret;
+
+       wm8962_mic_detect(codec, &speyside_wm8962_headset);
+
+       return 0;
+}
+
+static struct snd_soc_card speyside_wm8962 = {
+       .name = "Speyside WM8962",
+       .dai_link = speyside_wm8962_dai,
+       .num_links = ARRAY_SIZE(speyside_wm8962_dai),
+
+       .set_bias_level = speyside_wm8962_set_bias_level,
+       .set_bias_level_post = speyside_wm8962_set_bias_level_post,
+
+       .controls = controls,
+       .num_controls = ARRAY_SIZE(controls),
+       .dapm_widgets = widgets,
+       .num_dapm_widgets = ARRAY_SIZE(widgets),
+       .dapm_routes = audio_paths,
+       .num_dapm_routes = ARRAY_SIZE(audio_paths),
+
+       .late_probe = speyside_wm8962_late_probe,
+};
+
+static __devinit int speyside_wm8962_probe(struct platform_device *pdev)
+{
+       struct snd_soc_card *card = &speyside_wm8962;
+       int ret;
+
+       card->dev = &pdev->dev;
+
+       ret = snd_soc_register_card(card);
+       if (ret) {
+               dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+                       ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int __devexit speyside_wm8962_remove(struct platform_device *pdev)
+{
+       struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+       snd_soc_unregister_card(card);
+
+       return 0;
+}
+
+static struct platform_driver speyside_wm8962_driver = {
+       .driver = {
+               .name = "speyside-wm8962",
+               .owner = THIS_MODULE,
+               .pm = &snd_soc_pm_ops,
+       },
+       .probe = speyside_wm8962_probe,
+       .remove = __devexit_p(speyside_wm8962_remove),
+};
+
+static int __init speyside_wm8962_audio_init(void)
+{
+       return platform_driver_register(&speyside_wm8962_driver);
+}
+module_init(speyside_wm8962_audio_init);
+
+static void __exit speyside_wm8962_audio_exit(void)
+{
+       platform_driver_unregister(&speyside_wm8962_driver);
+}
+module_exit(speyside_wm8962_audio_exit);
+
+MODULE_DESCRIPTION("Speyside WM8962 audio support");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:speyside-wm8962");