+++ /dev/null
---- lirc/drivers/lirc_sir/lirc_sir.c.orig 2004-11-18 17:30:17 +0100
-+++ lirc/drivers/lirc_sir/lirc_sir.c 2004-11-18 17:30:21 +0100
-@@ -628,6 +628,7 @@
- struct timeval curr_tv;
- static unsigned long deltv;
- #ifdef LIRC_ON_SA1100
-+ unsigned long deltintrtv;
- int status;
- static int n=0;
-
+++ /dev/null
---- lirc/remotes/hauppauge/lircd.conf.hauppauge~ 2003-05-03 15:42:30.000000000 +0100
-+++ lirc/remotes/hauppauge/lircd.conf.hauppauge 2004-10-10 20:14:14.000000000 +0100
-@@ -51,71 +51,3 @@
- end codes
-
- end remote
--
--
--#
--# this config file was automatically generated
--# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
--#
--# contributed by
--#
--# brand: Hauppauge
--# model no. of remote control:
--# devices being controlled by this remote: PVR 2/350
--#
--
--begin remote
--
-- name hauppauge_pvr
-- bits 13
-- flags RC5|CONST_LENGTH
-- eps 30
-- aeps 100
--
-- one 969 811
-- zero 969 811
-- plead 1097
-- gap 114605
-- toggle_bit 2
--
--
-- begin codes
-- Power 0x00000000000017FD
-- Go 0x00000000000017FB
-- 1 0x00000000000017C1
-- 2 0x00000000000017C2
-- 3 0x00000000000017C3
-- 4 0x00000000000017C4
-- 5 0x00000000000017C5
-- 6 0x00000000000017C6
-- 7 0x00000000000017C7
-- 8 0x00000000000017C8
-- 9 0x00000000000017C9
-- Back/Exit 0x00000000000017DF
-- 0 0x00000000000017C0
-- Menu 0x00000000000017CD
-- Red 0x00000000000017CB
-- Green 0x00000000000017EE
-- Yellow 0x00000000000017F8
-- Blue 0x00000000000017E9
-- Ch+ 0x00000000000017E0
-- Ch- 0x00000000000017E1
-- Vol- 0x00000000000017D1
-- Vol+ 0x00000000000017D0
-- Ok 0x00000000000017E5
-- Mute 0x00000000000017CF
-- Blank 0x00000000000017CC
-- Full 0x00000000000017FC
-- Rewind 0x00000000000017F2
-- Play 0x00000000000017F5
-- Forward 0x00000000000017F4
-- Record 0x00000000000017F7
-- Stop 0x00000000000017F6
-- Pause 0x00000000000017F0
-- Replay 0x00000000000017E4
-- Skip 0x00000000000017DE
-- end codes
--
--end remote
--
--
---- /dev/null 2004-06-13 02:32:19.000000000 +0100
-+++ lirc/remotes/hauppauge/lircd.conf.hauppauge-pvr 2004-10-10 20:14:05.000000000 +0100
-@@ -0,0 +1,64 @@
-+#
-+# this config file was automatically generated
-+# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
-+#
-+# contributed by
-+#
-+# brand: Hauppauge
-+# model no. of remote control:
-+# devices being controlled by this remote: PVR 2/350
-+#
-+
-+begin remote
-+
-+ name hauppauge_pvr
-+ bits 13
-+ flags RC5|CONST_LENGTH
-+ eps 30
-+ aeps 100
-+
-+ one 969 811
-+ zero 969 811
-+ plead 1097
-+ gap 114605
-+ toggle_bit 2
-+
-+
-+ begin codes
-+ Power 0x00000000000017FD
-+ Go 0x00000000000017FB
-+ 1 0x00000000000017C1
-+ 2 0x00000000000017C2
-+ 3 0x00000000000017C3
-+ 4 0x00000000000017C4
-+ 5 0x00000000000017C5
-+ 6 0x00000000000017C6
-+ 7 0x00000000000017C7
-+ 8 0x00000000000017C8
-+ 9 0x00000000000017C9
-+ Back/Exit 0x00000000000017DF
-+ 0 0x00000000000017C0
-+ Menu 0x00000000000017CD
-+ Red 0x00000000000017CB
-+ Green 0x00000000000017EE
-+ Yellow 0x00000000000017F8
-+ Blue 0x00000000000017E9
-+ Ch+ 0x00000000000017E0
-+ Ch- 0x00000000000017E1
-+ Vol- 0x00000000000017D1
-+ Vol+ 0x00000000000017D0
-+ Ok 0x00000000000017E5
-+ Mute 0x00000000000017CF
-+ Blank 0x00000000000017CC
-+ Full 0x00000000000017FC
-+ Rewind 0x00000000000017F2
-+ Play 0x00000000000017F5
-+ Forward 0x00000000000017F4
-+ Record 0x00000000000017F7
-+ Stop 0x00000000000017F6
-+ Pause 0x00000000000017F0
-+ Replay 0x00000000000017E4
-+ Skip 0x00000000000017DE
-+ end codes
-+
-+end remote
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls. This package contains the lirc kernel modules."
-SECTION = "base"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel fakeroot-native setserial"
-RDEPENDS_nslu2 = "setserial"
-PR = "r3"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/lirc/lirc-${PV}.tar.gz"
-S = "${WORKDIR}/lirc-${PV}"
-
-inherit autotools module
-
-require lirc-config.inc
-
-MAKE_TARGETS = "KERNEL_PATH=${STAGING_KERNEL_DIR} MAKE='make -e' -C drivers"
-
-fakeroot do_install() {
- oe_runmake -C drivers DESTDIR="${D}" moduledir="/lib/modules/${KERNEL_VERSION}/lirc" install
- rm -rf ${D}/dev
-}
-
-# nslu2 uses udev, so /dev/lirc0 will be created automatically
-# and /dev/lirc will be created by /etc/udev/rules.d/lirc.rules
-# (that's the kernel-2.6+udev solution)
-do_install_append_nslu2() {
- install -d ${D}${sysconfdir}/modutils/
- echo 'lirc_serial' > ${D}${sysconfdir}/modutils/lirc_serial
- install -d ${D}${sysconfdir}/modprobe.d/
- echo 'install lirc_serial /bin/setserial /dev/ttyS1 uart none; /sbin/leds ready on; /sbin/modprobe --ignore-install lirc_serial' >${D}${sysconfdir}/modprobe.d/lirc_serial
- install -d ${D}${sysconfdir}/udev/rules.d/
- echo 'KERNEL="lirc0", SYMLINK="lirc"' > ${D}${sysconfdir}/udev/rules.d/lirc.rules
-}
-
-# this is for distributions that don't use udev
-pkg_postinst_append() {
-if [ ! -c $D/dev/lirc -a ! -f /sbin/udevd ]; then mknod $D/dev/lirc c 61 0; fi
-}
-
-FILES_${PN} = "/lib/modules"
-FILES_${PN}_append_nslu2 = " ${sysconfdir}/modutils ${sysconfdir}/modprobe.d ${sysconfdir}/udev/rules.d"
-
-SRC_URI[md5sum] = "596e05980f75372fa998d50eb1dcade0"
-SRC_URI[sha256sum] = "4097abc39b928970ba3232942ac5a6db7ec4ed4164593b9223c90470c9c994dc"
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls. This package contains the lirc kernel modules."
-SECTION = "base"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel fakeroot-native setserial"
-RDEPENDS_nslu2 = "setserial"
-PR = "r0"
-
-# enable this bb file until the other packages compile again
-#DEFAULT_PREFERENCE = "-1"
-
-SRCDATE=${@bb.data.getVar('PV', d, 1)[9:]}
-
-SRC_URI = "cvs://anonymous@lirc.cvs.sourceforge.net/cvsroot/lirc;module=lirc;method=pserver;cvsdate=${SRCDATE}"
-S = "${WORKDIR}/lirc"
-
-inherit autotools module
-
-require lirc-config.inc
-
-MAKE_TARGETS = "KERNEL_PATH=${STAGING_KERNEL_DIR} MAKE='make -e' -C drivers"
-
-fakeroot do_install() {
- oe_runmake -C drivers DESTDIR="${D}" moduledir="/lib/modules/${KERNEL_VERSION}/lirc" install
- rm -rf ${D}/dev
-}
-
-# nslu2 uses udev, so /dev/lirc0 will be created automatically
-# and /dev/lirc will be created by /etc/udev/rules.d/lirc.rules
-# (that's the kernel-2.6+udev solution)
-do_install_append_nslu2() {
- install -d ${D}${sysconfdir}/modutils/
- echo 'lirc_serial' > ${D}${sysconfdir}/modutils/lirc_serial
- install -d ${D}${sysconfdir}/modprobe.d/
- echo 'install lirc_serial /bin/setserial /dev/ttyS1 uart none; /sbin/leds ready on; /sbin/modprobe --ignore-install lirc_serial' >${D}${sysconfdir}/modprobe.d/lirc_serial
- install -d ${D}${sysconfdir}/udev/rules.d/
- echo 'KERNEL="lirc0", SYMLINK="lirc"' > ${D}${sysconfdir}/udev/rules.d/lirc.rules
-}
-
-# this is for distributions that don't use udev
-pkg_postinst_append() {
-if [ ! -c $D/dev/lirc -a ! -f /sbin/udevd ]; then mknod $D/dev/lirc c 61 0; fi
-}
-
-FILES_${PN} = "/lib/modules"
-FILES_${PN}_append_nslu2 = " ${sysconfdir}/modutils ${sysconfdir}/modprobe.d ${sysconfdir}/udev/rules.d"
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls. This package contains the lirc kernel modules."
-SECTION = "base"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel fakeroot-native setserial"
-RDEPENDS_nslu2 = "setserial"
-PR = "r0"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/lirc/lirc-${PV}.tar.gz"
-S = "${WORKDIR}/lirc-${PV}"
-
-inherit autotools module
-
-require lirc-config.inc
-
-MAKE_TARGETS = "KERNEL_PATH=${STAGING_KERNEL_DIR} MAKE='make -e' -C drivers"
-
-fakeroot do_install() {
- oe_runmake -C drivers DESTDIR="${D}" moduledir="/lib/modules/${KERNEL_VERSION}/lirc" install
- rm -rf ${D}/dev
-}
-
-# nslu2 uses udev, so /dev/lirc0 will be created automatically
-# and /dev/lirc will be created by /etc/udev/rules.d/lirc.rules
-# (that's the kernel-2.6+udev solution)
-do_install_append_nslu2() {
- install -d ${D}${sysconfdir}/modutils/
- echo 'lirc_serial' > ${D}${sysconfdir}/modutils/lirc_serial
- install -d ${D}${sysconfdir}/modprobe.d/
- echo 'install lirc_serial /bin/setserial /dev/ttyS1 uart none; /sbin/leds ready on; /sbin/modprobe --ignore-install lirc_serial' >${D}${sysconfdir}/modprobe.d/lirc_serial
- install -d ${D}${sysconfdir}/udev/rules.d/
- echo 'KERNEL="lirc0", SYMLINK="lirc"' > ${D}${sysconfdir}/udev/rules.d/lirc.rules
-}
-
-# this is for distributions that don't use udev
-pkg_postinst_append() {
-if [ ! -c $D/dev/lirc -a ! -f /sbin/udevd ]; then mknod $D/dev/lirc c 61 0; fi
-}
-
-FILES_${PN} = "/lib/modules"
-FILES_${PN}_append_nslu2 = " ${sysconfdir}/modutils ${sysconfdir}/modprobe.d ${sysconfdir}/udev/rules.d"
-
-SRC_URI[md5sum] = "5687331324ff5fc551f37ce419b2a926"
-SRC_URI[sha256sum] = "d701ba12a96d913fc963eb7e5cc751bbd12fefb921dae4e70c8549a43a108dd6"
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls. This package contains the lirc kernel modules."
-SECTION = "base"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel fakeroot-native setserial"
-PR = "r0"
-
-SRCDATE=${@bb.data.getVar('PV', d, 1)[9:]}
-
-SRC_URI = "cvs://anonymous@lirc.cvs.sourceforge.net/cvsroot/lirc;module=lirc;method=pserver;cvsdate=${SRCDATE}"
-S = "${WORKDIR}/lirc"
-
-
-inherit autotools module
-
-require lirc-config.inc
-
-MAKE_TARGETS = "KERNEL_PATH=${STAGING_KERNEL_DIR} MAKE='make V=1' -C drivers"
-
-fakeroot do_install() {
- oe_runmake -C drivers DESTDIR="${D}" moduledir="/lib/modules/${KERNEL_VERSION}/lirc" install
- rm -rf ${D}/dev
-}
-
-# this is for distributions that don't use udev
-pkg_postinst_append() {
-if [ ! -c $D/dev/lirc -a ! -f /sbin/udevd ]; then mknod $D/dev/lirc c 61 0; fi
-}
-
-FILES_${PN} = "/lib/modules"
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls. This package contains the lirc kernel modules."
-SECTION = "base"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel fakeroot-native setserial"
-PR = "r0"
-
-SRCDATE=${@bb.data.getVar('PV', d, 1)[9:]}
-
-SRC_URI = "cvs://anonymous@lirc.cvs.sourceforge.net/cvsroot/lirc;module=lirc;method=pserver;cvsdate=${SRCDATE}"
-S = "${WORKDIR}/lirc"
-
-
-inherit autotools module
-
-require lirc-config.inc
-
-MAKE_TARGETS = "KERNEL_PATH=${STAGING_KERNEL_DIR} MAKE='make V=1' -C drivers"
-
-fakeroot do_install() {
- oe_runmake -C drivers DESTDIR="${D}" moduledir="/lib/modules/${KERNEL_VERSION}/lirc" install
- rm -rf ${D}/dev
-}
-
-# this is for distributions that don't use udev
-pkg_postinst_append() {
-if [ ! -c $D/dev/lirc -a ! -f /sbin/udevd ]; then mknod $D/dev/lirc c 61 0; fi
-}
-
-FILES_${PN} = "/lib/modules"
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls. This package contains the lirc kernel modules."
-SECTION = "base"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel fakeroot-native setserial"
-PR = "r0"
-
-SRCDATE=${@bb.data.getVar('PV', d, 1)[9:]}
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/lirc/lirc-${PV}.tar.gz"
-S = "${WORKDIR}/lirc-${PV}"
-
-
-inherit autotools module
-
-require lirc-config.inc
-
-MAKE_TARGETS = "KERNEL_PATH=${STAGING_KERNEL_DIR} MAKE='make V=1' -C drivers"
-
-fakeroot do_install() {
- oe_runmake -C drivers DESTDIR="${D}" moduledir="/lib/modules/${KERNEL_VERSION}/lirc" install
- rm -rf ${D}/dev
-}
-
-# this is for distributions that don't use udev
-pkg_postinst_append() {
-if [ ! -c $D/dev/lirc -a ! -f /sbin/udevd ]; then mknod $D/dev/lirc c 61 0; fi
-}
-
-FILES_${PN} = "/lib/modules"
-
-SRC_URI[md5sum] = "1101c44d542807a4f9f5e33349b5bf56"
-SRC_URI[sha256sum] = "d6e68935e69c82bba091cb102bbc4b63428eb8deb94c7d00e14ea3b673e10712"
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls."
-DESCRIPTION_append_lirc = " This package contains the lirc daemon, libraries and tools."
-DESCRIPTION_append_lirc-x = " This package contains lirc tools for X11."
-DESCRIPTION_append_lirc-exec = " This package contains a daemon that runs programs on IR signals."
-DESCRIPTION_append_lirc-remotes = " This package contains some config files for remotes."
-DESCRIPTION_append_lirc-nslu2example = " This package contains a working config for RC5 remotes and a modified NSLU2."
-SECTION = "console/network"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel virtual/libx11 libxau libsm libice"
-DEPENDS_nslu2 = "virtual/kernel lirc-modules"
-RDEPENDS_${PN} = "lirc-modules"
-RDEPENDS_lirc-x = "lirc"
-RDEPENDS_lirc-exec = "lirc"
-RDEPENDS_lirc-nslu2example = "lirc lirc-exec"
-RRECOMMENDS_lirc = "lirc-exec"
-PR = "r5"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/lirc/lirc-${PV}.tar.gz \
- file://lircd.init file://lircmd.init file://lircexec.init"
-SRC_URI_append_nslu2 = " file://lircd.conf_nslu2 file://lircrc_nslu2"
-
-S = "${WORKDIR}/lirc-${PV}"
-
-inherit autotools module-base update-rc.d
-
-INITSCRIPT_PACKAGES = "lirc lirc-exec"
-INITSCRIPT_NAME = "lircd"
-INITSCRIPT_PARAMS = "defaults 20"
-INITSCRIPT_NAME_lirc-exec = "lircexec"
-INITSCRIPT_PARAMS_lirc-exec = "defaults 21"
-
-require lirc-config.inc
-
-EXTRA_OEMAKE = 'SUBDIRS="daemons tools"'
-
-do_stage() {
- oe_libinstall -so -C tools liblirc_client ${STAGING_LIBDIR}
- install -d ${STAGING_INCDIR}/lirc/
- install -m 0644 tools/lirc_client.h ${STAGING_INCDIR}/lirc/
-}
-
-do_install_append() {
- install -d ${D}${sysconfdir}/init.d
- install ${WORKDIR}/lircd.init ${D}${sysconfdir}/init.d/lircd
- install ${WORKDIR}/lircexec.init ${D}${sysconfdir}/init.d/lircexec
- install -d ${D}${datadir}/lirc/
- cp -pPR ${S}/remotes ${D}${datadir}/lirc/
- rm -rf ${D}/dev
-}
-
-do_install_append_nslu2() {
- install -d ${D}${sysconfdir}
- install ${WORKDIR}/lircd.conf_nslu2 ${D}${sysconfdir}/lircd.conf
- install ${WORKDIR}/lircrc_nslu2 ${D}${sysconfdir}/lircrc
-}
-
-PACKAGES =+ "lirc-x lirc-exec lirc-remotes"
-PACKAGES_prepend_nslu2 = "lirc-nslu2example "
-
-FILES_${PN}-dbg += "${bindir}/.debug ${sbindir}/.debug"
-FILES_${PN} = "${bindir} ${sbindir} ${libdir} ${sysconfdir}/init.d"
-FILES_lirc-x = "${bindir}/irxevent ${bindir}/xmode2"
-FILES_lirc-exec = "${bindir}/irexec ${sysconfdir}/init.d/lircexec"
-FILES_lirc-remotes = "${datadir}/lirc/remotes"
-FILES_lirc-nslu2example = "${sysconfdir}/lircd.conf ${sysconfdir}/lircrc"
-CONFFILES_lirc-nslu2example = "${FILES_lirc-nslu2example}"
-
-SRC_URI[md5sum] = "596e05980f75372fa998d50eb1dcade0"
-SRC_URI[sha256sum] = "4097abc39b928970ba3232942ac5a6db7ec4ed4164593b9223c90470c9c994dc"
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls."
-DESCRIPTION_append_lirc = " This package contains the lirc daemon, libraries and tools."
-DESCRIPTION_append_lirc-x = " This package contains lirc tools for X11."
-DESCRIPTION_append_lirc-exec = " This package contains a daemon that runs programs on IR signals."
-DESCRIPTION_append_lirc-remotes = " This package contains some config files for remotes."
-DESCRIPTION_append_lirc-nslu2example = " This package contains a working config for RC5 remotes and a modified NSLU2."
-SECTION = "console/network"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel virtual/libx11 libxau libsm libice"
-DEPENDS_nslu2 = "virtual/kernel lirc-modules"
-RDEPENDS_${PN} = "lirc-modules"
-RDEPENDS_lirc-x = "lirc"
-RDEPENDS_lirc-exec = "lirc"
-RDEPENDS_lirc-nslu2example = "lirc lirc-exec"
-RRECOMMENDS_lirc = "lirc-exec"
-PR = "r3"
-
-# enable cvs version since until compilation issues for other packages have been fixed (cf. bug 2284 et al).
-#DEFAULT_PREFERENCE = "-1"
-
-SRCDATE=${@bb.data.getVar('PV', d, 1)[9:]}
-
-SRC_URI = "cvs://anonymous@lirc.cvs.sourceforge.net/cvsroot/lirc;module=lirc;method=pserver;cvsdate=${SRCDATE} \
- file://lircd.init file://lircmd.init file://lircexec.init"
-SRC_URI_append_nslu2 = " file://lircd.conf_nslu2 file://lircrc_nslu2"
-
-S = "${WORKDIR}/lirc"
-
-inherit autotools module-base update-rc.d
-
-INITSCRIPT_PACKAGES = "lirc lirc-exec"
-INITSCRIPT_NAME = "lircd"
-INITSCRIPT_PARAMS = "defaults 20"
-INITSCRIPT_NAME_lirc-exec = "lircexec"
-INITSCRIPT_PARAMS_lirc-exec = "defaults 21"
-
-require lirc-config.inc
-
-EXTRA_OEMAKE = 'SUBDIRS="daemons tools"'
-
-do_stage() {
- oe_libinstall -so -C tools liblirc_client ${STAGING_LIBDIR}
- install -d ${STAGING_INCDIR}/lirc/
- install -m 0644 tools/lirc_client.h ${STAGING_INCDIR}/lirc/
-}
-
-do_install_append() {
- install -d ${D}${sysconfdir}/init.d
- install ${WORKDIR}/lircd.init ${D}${sysconfdir}/init.d/lircd
- install ${WORKDIR}/lircexec.init ${D}${sysconfdir}/init.d/lircexec
- install -d ${D}${datadir}/lirc/
- cp -pPR ${S}/remotes ${D}${datadir}/lirc/
- rm -rf ${D}/dev
-}
-
-do_install_append_nslu2() {
- install -d ${D}${sysconfdir}
- install ${WORKDIR}/lircd.conf_nslu2 ${D}${sysconfdir}/lircd.conf
- install ${WORKDIR}/lircrc_nslu2 ${D}${sysconfdir}/lircrc
-}
-
-PACKAGES =+ "lirc-x lirc-exec lirc-remotes"
-PACKAGES_prepend_nslu2 = "lirc-nslu2example "
-
-FILES_${PN}-dbg += "${bindir}/.debug ${sbindir}/.debug"
-FILES_${PN} = "${bindir} ${sbindir} ${libdir}/*.so.* ${sysconfdir}/init.d"
-FILES_lirc-x = "${bindir}/irxevent ${bindir}/xmode2"
-FILES_lirc-exec = "${bindir}/irexec ${sysconfdir}/init.d/lircexec"
-FILES_lirc-remotes = "${datadir}/lirc/remotes"
-FILES_lirc-nslu2example = "${sysconfdir}/lircd.conf ${sysconfdir}/lircrc"
-CONFFILES_lirc-nslu2example = "${FILES_lirc-nslu2example}"
+++ /dev/null
-DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls."
-DESCRIPTION_append_lirc = " This package contains the lirc daemon, libraries and tools."
-DESCRIPTION_append_lirc-x = " This package contains lirc tools for X11."
-DESCRIPTION_append_lirc-exec = " This package contains a daemon that runs programs on IR signals."
-DESCRIPTION_append_lirc-remotes = " This package contains some config files for remotes."
-DESCRIPTION_append_lirc-nslu2example = " This package contains a working config for RC5 remotes and a modified NSLU2."
-SECTION = "console/network"
-PRIORITY = "optional"
-HOMEPAGE = "http://www.lirc.org"
-LICENSE = "GPL"
-DEPENDS = "virtual/kernel virtual/libx11 libxau libsm libice"
-DEPENDS_nslu2 = "virtual/kernel lirc-modules"
-RDEPENDS_${PN} = "lirc-modules"
-RDEPENDS_lirc-x = "lirc"
-RDEPENDS_lirc-exec = "lirc"
-RDEPENDS_lirc-nslu2example = "lirc lirc-exec"
-RRECOMMENDS_lirc = "lirc-exec"
-PR = "r1"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/lirc/lirc-${PV}.tar.gz \
- file://lircd.init file://lircmd.init file://lircexec.init"
-SRC_URI_append_nslu2 = " file://lircd.conf_nslu2 file://lircrc_nslu2"
-
-S = "${WORKDIR}/lirc-${PV}"
-
-inherit autotools module-base update-rc.d
-
-INITSCRIPT_PACKAGES = "lirc lirc-exec"
-INITSCRIPT_NAME = "lircd"
-INITSCRIPT_PARAMS = "defaults 20"
-INITSCRIPT_NAME_lirc-exec = "lircexec"
-INITSCRIPT_PARAMS_lirc-exec = "defaults 21"
-
-require lirc-config.inc
-
-EXTRA_OEMAKE = 'SUBDIRS="daemons tools"'
-
-do_stage() {
- oe_libinstall -so -C tools liblirc_client ${STAGING_LIBDIR}
- install -d ${STAGING_INCDIR}/lirc/
- install -m 0644 tools/lirc_client.h ${STAGING_INCDIR}/lirc/
-}
-
-do_install_append() {
- install -d ${D}${sysconfdir}/init.d
- install ${WORKDIR}/lircd.init ${D}${sysconfdir}/init.d/lircd
- install ${WORKDIR}/lircexec.init ${D}${sysconfdir}/init.d/lircexec
- install -d ${D}${datadir}/lirc/
- cp -pPR ${S}/remotes ${D}${datadir}/lirc/
- rm -rf ${D}/dev
-}
-
-do_install_append_nslu2() {
- install -d ${D}${sysconfdir}
- install ${WORKDIR}/lircd.conf_nslu2 ${D}${sysconfdir}/lircd.conf
- install ${WORKDIR}/lircrc_nslu2 ${D}${sysconfdir}/lircrc
-}
-
-PACKAGES =+ "lirc-x lirc-exec lirc-remotes"
-PACKAGES_prepend_nslu2 = "lirc-nslu2example "
-
-FILES_${PN}-dbg += "${bindir}/.debug ${sbindir}/.debug"
-FILES_${PN} = "${bindir} ${sbindir} ${libdir} ${sysconfdir}/init.d"
-FILES_lirc-x = "${bindir}/irxevent ${bindir}/xmode2"
-FILES_lirc-exec = "${bindir}/irexec ${sysconfdir}/init.d/lircexec"
-FILES_lirc-remotes = "${datadir}/lirc/remotes"
-FILES_lirc-nslu2example = "${sysconfdir}/lircd.conf ${sysconfdir}/lircrc"
-CONFFILES_lirc-nslu2example = "${FILES_lirc-nslu2example}"
-
-SRC_URI[md5sum] = "1101c44d542807a4f9f5e33349b5bf56"
-SRC_URI[sha256sum] = "d6e68935e69c82bba091cb102bbc4b63428eb8deb94c7d00e14ea3b673e10712"
git.openpandora.org / openembedded.git / commitdiff