Pyra: turn on LDO2 for VMMC for the SDIO4 (right SD card) slot

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>

diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c
index ff52f03..773e281 100644 (file)
--- a/drivers/power/palmas.c
+++ b/drivers/power/palmas.c
@@ -66,6 +66,20 @@ int palmas_mmc1_poweron_ldo(void)
        }
        return 0;
 #else
+#if defined(CONFIG_TARGET_PYRA_LC15) || defined(CONFIG_TARGET_LC15)
+       /* use LDO2 for SDIO4 slot */
+       val = LDO_VOLT_3V0;
+       if (palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO2_VOLTAGE, val)) {
+               printf("tps65903x: could not set LDO2 voltage.\n");
+//             return 1;
+       }
+       /* TURN ON LDO2 */
+       val = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+       if (palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO2_CTRL, val)) {
+               printf("tps65903x: could not turn on LDO2.\n");
+//             return 1;
+       }
+#endif
        /*
         * We assume that this is a OMAP543X + TWL603X board:
         * Set TWL6035/37 LDO9 to 3.0 V