rockchip: rk3328: Fix loading FIT from SD-card when booting from eMMC

When RK3328 boards run SPL from eMMC and fail to load FIT from eMMC due
to it being missing or checksum validation fails there is a fallback to
read FIT from SD-card. However, without proper pinctrl configuration
reading FIT from SD-card will fail:

  U-Boot SPL 2024.04-rc1 (Feb 05 2024 - 22:18:22 +0000)
  Trying to boot from MMC1
  mmc_load_image_raw_sector: mmc block read error
  Trying to boot from MMC2
  Card did not respond to voltage select! : -110
  spl: mmc init failed with error: -95
  Trying to boot from MMC1
  mmc_load_image_raw_sector: mmc block read error
  SPL: failed to boot from all boot devices
  ### ERROR ### Please RESET the board ###

Fix this by tagging related emmc and sdmmc pinctrl nodes with bootph
props. Also sort and move common nodes shared by all boards to the SoC
u-boot.dtsi.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi
index 12b68df..38ad3cc 100644 (file)
--- a/arch/arm/dts/rk3328-evb-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi
@@ -44,3 +44,7 @@
        /* Integrated PHY unsupported by U-Boot */
        status = "broken";
 };
+
+&vcc_sd {
+       bootph-pre-ram;
+};

diff --git a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
index 0a1152e..cca4f06 100644 (file)
--- a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
@@ -7,23 +7,18 @@
 #include "rk3328-u-boot.dtsi"
 #include "rk3328-sdram-ddr4-666.dtsi"
 
-&gpio0 {
+&gpio1 {
        bootph-pre-ram;
 };
 
-&pinctrl {
-       bootph-pre-ram;
-};
-
-&sdmmc0m1_pin {
-       bootph-pre-ram;
+&sdio_vcc_pin {
+       bootph-all;
 };
 
-&pcfg_pull_up_4ma {
+&vcc_io_sdio {
        bootph-pre-ram;
 };
 
-/* Need this and all the pinctrl/gpio stuff above to set pinmux */
 &vcc_sd {
        bootph-pre-ram;
 };

diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
index 8a4189c..7cdf691 100644 (file)
--- a/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
@@ -7,29 +7,16 @@
 #include "rk3328-u-boot.dtsi"
 #include "rk3328-sdram-lpddr3-666.dtsi"
 
-&gpio0 {
-       bootph-pre-ram;
-};
-
-&pinctrl {
-       bootph-pre-ram;
-};
-
-&sdmmc0m1_pin {
+&spi0 {
        bootph-pre-ram;
-};
+       bootph-some-ram;
 
-&pcfg_pull_up_4ma {
-       bootph-pre-ram;
+       flash@0 {
+               bootph-pre-ram;
+               bootph-some-ram;
+       };
 };
 
-/* Need this and all the pinctrl/gpio stuff above to set pinmux */
 &vcc_sd {
        bootph-pre-ram;
 };
-
-&spi0 {
-       spi_flash: spiflash@0 {
-               bootph-all;
-       };
-};

diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
index 2e3b6a7..35baeb2 100644 (file)
--- a/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
@@ -7,29 +7,16 @@
 #include "rk3328-u-boot.dtsi"
 #include "rk3328-sdram-ddr4-666.dtsi"
 
-&gpio0 {
-       bootph-pre-ram;
-};
-
-&pinctrl {
-       bootph-pre-ram;
-};
-
-&sdmmc0m1_pin {
+&spi0 {
        bootph-pre-ram;
-};
+       bootph-some-ram;
 
-&pcfg_pull_up_4ma {
-       bootph-pre-ram;
+       flash@0 {
+               bootph-pre-ram;
+               bootph-some-ram;
+       };
 };
 
-/* Need this and all the pinctrl/gpio stuff above to set pinmux */
 &vcc_sd {
        bootph-pre-ram;
 };
-
-&spi0 {
-       spi_flash: spiflash@0 {
-               bootph-all;
-       };
-};

diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
index 8bc2f13..47d7496 100644 (file)
--- a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
@@ -29,23 +29,6 @@
        };
 };
 
-&gpio0 {
-       bootph-pre-ram;
-};
-
-&pinctrl {
-       bootph-pre-ram;
-};
-
-&sdmmc0m1_pin {
-       bootph-pre-ram;
-};
-
-&pcfg_pull_up_4ma {
-       bootph-pre-ram;
-};
-
-/* Need this and all the pinctrl/gpio stuff above to set pinmux */
 &vcc_sd {
        bootph-pre-ram;
 };

diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
index 1f220c6..9ed0aef 100644 (file)
--- a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
@@ -29,23 +29,6 @@
        };
 };
 
-&gpio0 {
-       bootph-pre-ram;
-};
-
-&pinctrl {
-       bootph-pre-ram;
-};
-
-&sdmmc0m1_pin {
-       bootph-pre-ram;
-};
-
-&pcfg_pull_up_4ma {
-       bootph-pre-ram;
-};
-
-/* Need this and all the pinctrl/gpio stuff above to set pinmux */
 &vcc_sd {
        bootph-pre-ram;
 };

diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
index bfe506f..9de645d 100644 (file)
--- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -29,29 +29,16 @@
        };
 };
 
-&gpio0 {
-       bootph-pre-ram;
-};
-
-&pinctrl {
-       bootph-pre-ram;
-};
-
-&sdmmc0m1_pin {
+&spi0 {
        bootph-pre-ram;
-};
+       bootph-some-ram;
 
-&pcfg_pull_up_4ma {
-       bootph-pre-ram;
+       flash@0 {
+               bootph-pre-ram;
+               bootph-some-ram;
+       };
 };
 
-/* Need this and all the pinctrl/gpio stuff above to set pinmux */
 &vcc_sd {
        bootph-pre-ram;
 };
-
-&spi0 {
-       spi_flash: flash@0 {
-               bootph-all;
-       };
-};

diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi
index a12be78..687c16d 100644 (file)
--- a/arch/arm/dts/rk3328-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-u-boot.dtsi
@@ -38,33 +38,104 @@
        bootph-all;
 };
 
+&emmc {
+       bootph-pre-ram;
+       bootph-some-ram;
+
+       /* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
+       u-boot,spl-fifo-mode;
+};
+
+&emmc_bus8 {
+       bootph-pre-ram;
+};
+
+&emmc_clk {
+       bootph-pre-ram;
+};
+
+&emmc_cmd {
+       bootph-pre-ram;
+};
+
+&gpio0 {
+       bootph-pre-ram;
+};
+
 &grf {
        bootph-all;
 };
 
-&uart2 {
+&pcfg_pull_none {
        bootph-all;
-       clock-frequency = <24000000>;
 };
 
-&emmc {
+&pcfg_pull_none_8ma {
+       bootph-pre-ram;
+};
+
+&pcfg_pull_none_12ma {
+       bootph-pre-ram;
+};
+
+&pcfg_pull_up {
        bootph-all;
+};
 
-       /* mmc to sram can't do dma, prevent aborts transfering TF-A parts */
-       u-boot,spl-fifo-mode;
+&pcfg_pull_up_4ma {
+       bootph-pre-ram;
+};
+
+&pcfg_pull_up_8ma {
+       bootph-pre-ram;
+};
+
+&pcfg_pull_up_12ma {
+       bootph-pre-ram;
+};
+
+&pinctrl {
+       bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &sdmmc {
-       bootph-all;
+       bootph-pre-ram;
+       bootph-some-ram;
 
-       /* mmc to sram can't do dma, prevent aborts transfering TF-A parts */
+       /* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
        u-boot,spl-fifo-mode;
 };
 
-&usb20_otg {
-       hnp-srp-disable;
+&sdmmc0_bus4 {
+       bootph-pre-ram;
+};
+
+&sdmmc0_clk {
+       bootph-pre-ram;
+};
+
+&sdmmc0_cmd {
+       bootph-pre-ram;
+};
+
+&sdmmc0_dectn {
+       bootph-pre-ram;
+};
+
+&sdmmc0m1_pin {
+       bootph-pre-ram;
+};
+
+&uart2 {
+       bootph-all;
+       clock-frequency = <24000000>;
 };
 
-&spi0 {
+&uart2m1_xfer {
        bootph-all;
 };
+
+&usb20_otg {
+       hnp-srp-disable;
+};