linux-2.6.24: PCI config delay patch for OXNAS machine

diff --git a/packages/linux/linux-2.6.24/oxnas/oxnas-pci-config-delay.patch b/packages/linux/linux-2.6.24/oxnas/oxnas-pci-config-delay.patch
new file mode 100644 (file)
index 0000000..5936b5b
--- /dev/null
+++ b/packages/linux/linux-2.6.24/oxnas/oxnas-pci-config-delay.patch
@@ -0,0 +1,56 @@
+--- linux-2.6.24.org/arch/arm/mach-oxnas/pci.c 2009-03-09 14:26:43.000000000 +0100
++++ linux-2.6.24/arch/arm/mach-oxnas/pci.c     2009-03-09 14:31:12.000000000 +0100
+@@ -25,6 +25,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/init.h>
+ #include <linux/delay.h>
++#include <linux/jiffies.h>
+ 
+ #include <asm/io.h>
+ #include <asm/hardware.h>
+@@ -71,6 +72,12 @@
+ 
+ extern spinlock_t oxnas_gpio_spinlock;
+ 
++#ifdef CONFIG_OXNAS_PCI_RESET
++static unsigned long pci_trhfa_startwait = 0;
++static unsigned long pci_trhfa_msec = 0;
++static unsigned long pci_trhfa_timeout = 0;
++#endif // CONFIG_OXNAS_PCI_RESET
++
+ #define PCI_BUS_NONMEM_START                  0x00000000
+ #define PCI_BUS_NONMEM_SIZE                   0x00080000
+                                
+@@ -505,6 +512,15 @@
+ struct pci_bus *oxnas_pci_scan_bus(int nr, struct pci_sys_data *sys)
+ {
+ //    printk(KERN_DEBUG "PCI: oxnas_pci_scan_bus\n");
++
++#ifdef CONFIG_OXNAS_PCI_RESET
++      printk(KERN_DEBUG "PCI: oxnas_pci_scan_bus now it's %lu, still waiting till %lu to become ready for config\n", jiffies, pci_trhfa_timeout);
++      if (time_after_eq(jiffies + msecs_to_jiffies(pci_trhfa_msec), pci_trhfa_timeout))  /* ensure not wrap */
++              while(time_before(jiffies, pci_trhfa_timeout)) 
++                              udelay(100);
++      printk(KERN_DEBUG "PCI: oxnas_pci_scan_bus waited from %lu to %lu to become ready for config\n", pci_trhfa_startwait, jiffies);
++#endif // CONFIG_OXNAS_PCI_RESET
++
+       return pci_scan_bus(sys->busnr, &oxnas_pci_ops, sys);
+ }
+ 
+@@ -651,6 +667,16 @@
+ 
+ static int __init oxnas_pci_init(void)
+ {
++#ifdef CONFIG_OXNAS_PCI_RESET
++      // CPU has reset PCI bus via GPIO.
++      // According to PCI spec, we have to wait for 2^25 PCI clocks to meet
++      // the PCI timing parameter Trhfa (RST# high to first access).
++      pci_trhfa_startwait = jiffies;
++      pci_trhfa_msec = 1000; // 1 sec should be fine for 33MHz
++      pci_trhfa_timeout = jiffies + msecs_to_jiffies(pci_trhfa_msec);
++      printk(KERN_DEBUG "PCI: oxnas_pci_init now it's %lu, will wait till %lu to become ready for config\n", pci_trhfa_startwait, pci_trhfa_timeout);
++#endif // CONFIG_OXNAS_PCI_RESET
++
+     pci_common_init(&oxnas_pci);
+       return 0;
+ }

diff --git a/packages/linux/linux_2.6.24.bb b/packages/linux/linux_2.6.24.bb
index 338e62c..be88eab 100644 (file)
--- a/packages/linux/linux_2.6.24.bb
+++ b/packages/linux/linux_2.6.24.bb
@@ -11,7 +11,7 @@ DEFAULT_PREFERENCE_ts72xx = "1"
 DEFAULT_PREFERENCE_oxnas = "1"
 DEFAULT_PREFERENCE_cs-e9302 = "1"
 
-PR = "r23"
+PR = "r24"
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2 \
            http://kamikaze.waninkoko.info/patches/2.6.24/kamikaze1/broken-out/squashfs-lzma-2.6.24.patch;patch=1 \
@@ -87,6 +87,7 @@ SRC_URI_append_ts72xx = "\
 SRC_URI_append_oxnas = " \
        file://oxnas.diff;patch=1 \
        file://oxnas-uart.patch;patch=1 \
+       file://oxnas-pci-config-delay.patch;patch=1 \
        "
 
 CMDLINE_cm-x270 = "console=${CMX270_CONSOLE_SERIAL_PORT},38400 monitor=1 mem=64M mtdparts=physmap-flash.0:256k(boot)ro,0x180000(kernel),-(root);cm-x270-nand:64m(app),-(data) rdinit=/sbin/init root=mtd3 rootfstype=jffs2"