+++ /dev/null
---- libmikmod-3.2.0-beta2/libmikmod.m4.orig 2004-01-21 02:36:34 +0100
-+++ libmikmod-3.2.0-beta2/libmikmod.m4 2004-08-12 11:28:30 +0200
-@@ -8,7 +8,7 @@
- dnl Test for libmikmod, and define LIBMIKMOD_CFLAGS, LIBMIKMOD_LIBS and
- dnl LIBMIKMOD_LDADD
- dnl
--AC_DEFUN(AM_PATH_LIBMIKMOD,
-+AC_DEFUN([AM_PATH_LIBMIKMOD],
- [dnl
- dnl Get the cflags and libraries from the libmikmod-config script
- dnl
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- /dev/null
-+++ libmikmod-3.2.0-beta2/m4/esd.m4
-@@ -0,0 +1,194 @@
-+# Configure paths for ESD
-+# Manish Singh 98-9-30
-+# stolen back from Frank Belew
-+# stolen from Manish Singh
-+# Shamelessly stolen from Owen Taylor
-+
-+dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-+dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS
-+dnl
-+AC_DEFUN(AM_PATH_ESD,
-+[dnl
-+dnl Get the cflags and libraries from the esd-config script
-+dnl
-+AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)],
-+ esd_prefix="$withval", esd_prefix="")
-+AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)],
-+ esd_exec_prefix="$withval", esd_exec_prefix="")
-+AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program],
-+ , enable_esdtest=yes)
-+
-+ if test x$esd_exec_prefix != x ; then
-+ esd_args="$esd_args --exec-prefix=$esd_exec_prefix"
-+ if test x${ESD_CONFIG+set} != xset ; then
-+ ESD_CONFIG=$esd_exec_prefix/bin/esd-config
-+ fi
-+ fi
-+ if test x$esd_prefix != x ; then
-+ esd_args="$esd_args --prefix=$esd_prefix"
-+ if test x${ESD_CONFIG+set} != xset ; then
-+ ESD_CONFIG=$esd_prefix/bin/esd-config
-+ fi
-+ fi
-+
-+ AC_PATH_PROG(ESD_CONFIG, esd-config, no)
-+ min_esd_version=ifelse([$1], ,0.2.7,$1)
-+ AC_MSG_CHECKING(for ESD - version >= $min_esd_version)
-+ no_esd=""
-+ if test "$ESD_CONFIG" = "no" ; then
-+ no_esd=yes
-+ else
-+ AC_LANG_SAVE
-+ AC_LANG_C
-+ ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`
-+ ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`
-+
-+ esd_major_version=`$ESD_CONFIG $esd_args --version | \
-+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-+ esd_minor_version=`$ESD_CONFIG $esd_args --version | \
-+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-+ esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \
-+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-+ if test "x$enable_esdtest" = "xyes" ; then
-+ ac_save_CFLAGS="$CFLAGS"
-+ ac_save_LIBS="$LIBS"
-+ CFLAGS="$CFLAGS $ESD_CFLAGS"
-+ LIBS="$LIBS $ESD_LIBS"
-+dnl
-+dnl Now check if the installed ESD is sufficiently new. (Also sanity
-+dnl checks the results of esd-config to some extent
-+dnl
-+ rm -f conf.esdtest
-+ AC_TRY_RUN([
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#include <esd.h>
-+
-+char*
-+my_strdup (char *str)
-+{
-+ char *new_str;
-+
-+ if (str)
-+ {
-+ new_str = malloc ((strlen (str) + 1) * sizeof(char));
-+ strcpy (new_str, str);
-+ }
-+ else
-+ new_str = NULL;
-+
-+ return new_str;
-+}
-+
-+int main ()
-+{
-+ int major, minor, micro;
-+ char *tmp_version;
-+
-+ system ("touch conf.esdtest");
-+
-+ /* HP/UX 9 (%@#!) writes to sscanf strings */
-+ tmp_version = my_strdup("$min_esd_version");
-+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
-+ printf("%s, bad version string\n", "$min_esd_version");
-+ exit(1);
-+ }
-+
-+ if (($esd_major_version > major) ||
-+ (($esd_major_version == major) && ($esd_minor_version > minor)) ||
-+ (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))
-+ {
-+ return 0;
-+ }
-+ else
-+ {
-+ printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);
-+ printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);
-+ printf("*** best to upgrade to the required version.\n");
-+ printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");
-+ printf("*** to point to the correct copy of esd-config, and remove the file\n");
-+ printf("*** config.cache before re-running configure\n");
-+ return 1;
-+ }
-+}
-+
-+],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-+ CFLAGS="$ac_save_CFLAGS"
-+ LIBS="$ac_save_LIBS"
-+ AC_LANG_RESTORE
-+ fi
-+ fi
-+ if test "x$no_esd" = x ; then
-+ AC_MSG_RESULT(yes)
-+ ifelse([$2], , :, [$2])
-+ else
-+ AC_MSG_RESULT(no)
-+ if test "$ESD_CONFIG" = "no" ; then
-+ echo "*** The esd-config script installed by ESD could not be found"
-+ echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"
-+ echo "*** your path, or set the ESD_CONFIG environment variable to the"
-+ echo "*** full path to esd-config."
-+ else
-+ if test -f conf.esdtest ; then
-+ :
-+ else
-+ echo "*** Could not run ESD test program, checking why..."
-+ CFLAGS="$CFLAGS $ESD_CFLAGS"
-+ LIBS="$LIBS $ESD_LIBS"
-+ AC_LANG_SAVE
-+ AC_LANG_C
-+ AC_TRY_LINK([
-+#include <stdio.h>
-+#include <esd.h>
-+], [ return 0; ],
-+ [ echo "*** The test program compiled, but did not run. This usually means"
-+ echo "*** that the run-time linker is not finding ESD or finding the wrong"
-+ echo "*** version of ESD. If it is not finding ESD, you'll need to set your"
-+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
-+ echo "*** is required on your system"
-+ echo "***"
-+ echo "*** If you have an old version installed, it is best to remove it, although"
-+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-+ [ echo "*** The test program failed to compile or link. See the file config.log for the"
-+ echo "*** exact error that occured. This usually means ESD was incorrectly installed"
-+ echo "*** or that you have moved ESD since it was installed. In the latter case, you"
-+ echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])
-+ CFLAGS="$ac_save_CFLAGS"
-+ LIBS="$ac_save_LIBS"
-+ AC_LANG_RESTORE
-+ fi
-+ fi
-+ ESD_CFLAGS=""
-+ ESD_LIBS=""
-+ ifelse([$3], , :, [$3])
-+ fi
-+ AC_SUBST(ESD_CFLAGS)
-+ AC_SUBST(ESD_LIBS)
-+ rm -f conf.esdtest
-+])
-+
-+dnl AM_ESD_SUPPORTS_MULTIPLE_RECORD([ACTION-IF-SUPPORTS [, ACTION-IF-NOT-SUPPORTS]])
-+dnl Test, whether esd supports multiple recording clients (version >=0.2.21)
-+dnl
-+AC_DEFUN(AM_ESD_SUPPORTS_MULTIPLE_RECORD,
-+[dnl
-+ AC_MSG_NOTICE([whether installed esd version supports multiple recording clients])
-+ ac_save_ESD_CFLAGS="$ESD_CFLAGS"
-+ ac_save_ESD_LIBS="$ESD_LIBS"
-+ AM_PATH_ESD(0.2.21,
-+ ifelse([$1], , [
-+ AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, true)
-+ AC_DEFINE(ESD_SUPPORTS_MULTIPLE_RECORD, 1,
-+ [Define if you have esound with support of multiple recording clients.])],
-+ [$1]),
-+ ifelse([$2], , [AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, false)], [$2])
-+ if test "x$ac_save_ESD_CFLAGS" != x ; then
-+ ESD_CFLAGS="$ac_save_ESD_CFLAGS"
-+ fi
-+ if test "x$ac_save_ESD_LIBS" != x ; then
-+ ESD_LIBS="$ac_save_ESD_LIBS"
-+ fi
-+ )
-+])
git.openpandora.org / openembedded.git / commitdiff