--- /dev/null
+What: /sys/class/power/ds2760-battery.*/charge_now
+Date: May 2010
+KernelVersion: 2.6.35
+Contact: Daniel Mack <daniel@caiaq.de>
+Description:
+ This file is writeable and can be used to set the current
+ coloumb counter value inside the battery monitor chip. This
+ is needed for unavoidable corrections of aging batteries.
+ A userspace daemon can monitor the battery charging logic
+ and once the counter drops out of considerable bounds, take
+ appropriate action.
+
+What: /sys/class/power/ds2760-battery.*/charge_full
+Date: May 2010
+KernelVersion: 2.6.35
+Contact: Daniel Mack <daniel@caiaq.de>
+Description:
+ This file is writeable and can be used to set the assumed
+ battery 'full level'. As batteries age, this value has to be
+ amended over time.
Say Y here to enable support for the power management unit
provided by the Wolfson Microelectronics WM8350 PMIC.
+config TEST_POWER
+ tristate "Test power driver"
+ help
+ This driver is used for testing. It's safe to say M here.
+
config BATTERY_DS2760
tristate "DS2760 battery driver (HP iPAQ & others)"
select W1
Say Y here to enable support for batteries with ds2760 chip.
config BATTERY_DS2782
- tristate "DS2782 standalone gas-gauge"
+ tristate "DS2782/DS2786 standalone gas-gauge"
depends on I2C
help
- Say Y here to enable support for the DS2782 standalone battery
+ Say Y here to enable support for the DS2782/DS2786 standalone battery
gas-gauge.
config BATTERY_PMU
in handheld and portable equipment. The MAX17040 is configured
to operate with a single lithium cell
+config BATTERY_Z2
+ tristate "Z2 battery driver"
+ depends on I2C && MACH_ZIPIT2
+ help
+ Say Y to include support for the battery on the Zipit Z2.
+
config CHARGER_PCF50633
tristate "NXP PCF50633 MBC"
depends on MFD_PCF50633
obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
+obj-$(CONFIG_TEST_POWER) += test_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
+obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
}
+static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
+ int active_full)
+{
+ unsigned char tmp[2] = {
+ active_full >> 8,
+ active_full & 0xff
+ };
+
+ if (tmp[0] == di->raw[DS2760_ACTIVE_FULL] &&
+ tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1])
+ return;
+
+ w1_ds2760_write(di->w1_dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
+ w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
+ w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
+
+ /* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL
+ * values won't be read back by ds2760_battery_read_status() */
+ di->raw[DS2760_ACTIVE_FULL] = tmp[0];
+ di->raw[DS2760_ACTIVE_FULL + 1] = tmp[1];
+}
+
static void ds2760_battery_work(struct work_struct *work)
{
struct ds2760_device_info *di = container_of(work,
return 0;
}
+static int ds2760_battery_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct ds2760_device_info *di = to_ds2760_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ /* the interface counts in uAh, convert the value */
+ ds2760_battery_write_active_full(di, val->intval / 1000L);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ /* ds2760_battery_set_current_accum() does the conversion */
+ ds2760_battery_set_current_accum(di, val->intval);
+ break;
+
+ default:
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+static int ds2760_battery_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ return 1;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static enum power_supply_property ds2760_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
di->bat.properties = ds2760_battery_props;
di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props);
di->bat.get_property = ds2760_battery_get_property;
+ di->bat.set_property = ds2760_battery_set_property;
+ di->bat.property_is_writeable =
+ ds2760_battery_property_is_writeable;
di->bat.set_charged = ds2760_battery_set_charged;
di->bat.external_power_changed =
ds2760_battery_external_power_changed;
*
* Author: Ryan Mallon <ryan@bluewatersys.com>
*
+ * DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
#include <linux/idr.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
+#include <linux/ds2782_battery.h>
#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
-#define DS2782_REG_VOLT_MSB 0x0c
-#define DS2782_REG_TEMP_MSB 0x0a
-#define DS2782_REG_CURRENT_MSB 0x0e
+#define DS278x_REG_VOLT_MSB 0x0c
+#define DS278x_REG_TEMP_MSB 0x0a
+#define DS278x_REG_CURRENT_MSB 0x0e
/* EEPROM Block */
#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
#define DS2782_CURRENT_UNITS 1563
-#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
+#define DS2786_REG_RARC 0x02 /* Remaining active relative capacity */
+
+#define DS2786_CURRENT_UNITS 25
+
+struct ds278x_info;
+
+struct ds278x_battery_ops {
+ int (*get_current)(struct ds278x_info *info, int *current_uA);
+ int (*get_voltage)(struct ds278x_info *info, int *voltage_uA);
+ int (*get_capacity)(struct ds278x_info *info, int *capacity_uA);
+
+};
+
+#define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)
-struct ds2782_info {
+struct ds278x_info {
struct i2c_client *client;
struct power_supply battery;
+ struct ds278x_battery_ops *ops;
int id;
+ int rsns;
};
static DEFINE_IDR(battery_id);
static DEFINE_MUTEX(battery_lock);
-static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
+static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val)
{
int ret;
return 0;
}
-static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
+static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb,
s16 *val)
{
int ret;
return 0;
}
-static int ds2782_get_temp(struct ds2782_info *info, int *temp)
+static int ds278x_get_temp(struct ds278x_info *info, int *temp)
{
s16 raw;
int err;
* celsius. The temperature value is stored as a 10 bit number, plus
* sign in the upper bits of a 16 bit register.
*/
- err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
+ err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw);
if (err)
return err;
*temp = ((raw / 32) * 125) / 100;
return 0;
}
-static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
+static int ds2782_get_current(struct ds278x_info *info, int *current_uA)
{
int sense_res;
int err;
* The units of measurement for current are dependent on the value of
* the sense resistor.
*/
- err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+ err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
if (err)
return err;
if (sense_res_raw == 0) {
dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
sense_res);
- err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
+ err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
if (err)
return err;
*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
return 0;
}
-static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
+static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uA)
{
s16 raw;
int err;
* Voltage is measured in units of 4.88mV. The voltage is stored as
* a 10-bit number plus sign, in the upper bits of a 16-bit register
*/
- err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
+ err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
if (err)
return err;
*voltage_uA = (raw / 32) * 4800;
return 0;
}
-static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
+static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
{
int err;
u8 raw;
- err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
+ err = ds278x_read_reg(info, DS2782_REG_RARC, &raw);
if (err)
return err;
*capacity = raw;
return raw;
}
-static int ds2782_get_status(struct ds2782_info *info, int *status)
+static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
+{
+ int err;
+ s16 raw;
+
+ err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
+ if (err)
+ return err;
+ *current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns);
+ return 0;
+}
+
+static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uA)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Voltage is measured in units of 1.22mV. The voltage is stored as
+ * a 10-bit number plus sign, in the upper bits of a 16-bit register
+ */
+ err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
+ if (err)
+ return err;
+ *voltage_uA = (raw / 8) * 1220;
+ return 0;
+}
+
+static int ds2786_get_capacity(struct ds278x_info *info, int *capacity)
+{
+ int err;
+ u8 raw;
+
+ err = ds278x_read_reg(info, DS2786_REG_RARC, &raw);
+ if (err)
+ return err;
+ /* Relative capacity is displayed with resolution 0.5 % */
+ *capacity = raw/2 ;
+ return 0;
+}
+
+static int ds278x_get_status(struct ds278x_info *info, int *status)
{
int err;
int current_uA;
int capacity;
- err = ds2782_get_current(info, ¤t_uA);
+ err = info->ops->get_current(info, ¤t_uA);
if (err)
return err;
- err = ds2782_get_capacity(info, &capacity);
+ err = info->ops->get_capacity(info, &capacity);
if (err)
return err;
return 0;
}
-static int ds2782_battery_get_property(struct power_supply *psy,
+static int ds278x_battery_get_property(struct power_supply *psy,
enum power_supply_property prop,
union power_supply_propval *val)
{
- struct ds2782_info *info = to_ds2782_info(psy);
+ struct ds278x_info *info = to_ds278x_info(psy);
int ret;
switch (prop) {
case POWER_SUPPLY_PROP_STATUS:
- ret = ds2782_get_status(info, &val->intval);
+ ret = ds278x_get_status(info, &val->intval);
break;
case POWER_SUPPLY_PROP_CAPACITY:
- ret = ds2782_get_capacity(info, &val->intval);
+ ret = info->ops->get_capacity(info, &val->intval);
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- ret = ds2782_get_voltage(info, &val->intval);
+ ret = info->ops->get_voltage(info, &val->intval);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- ret = ds2782_get_current(info, &val->intval);
+ ret = info->ops->get_current(info, &val->intval);
break;
case POWER_SUPPLY_PROP_TEMP:
- ret = ds2782_get_temp(info, &val->intval);
+ ret = ds278x_get_temp(info, &val->intval);
break;
default:
return ret;
}
-static enum power_supply_property ds2782_battery_props[] = {
+static enum power_supply_property ds278x_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_TEMP,
};
-static void ds2782_power_supply_init(struct power_supply *battery)
+static void ds278x_power_supply_init(struct power_supply *battery)
{
battery->type = POWER_SUPPLY_TYPE_BATTERY;
- battery->properties = ds2782_battery_props;
- battery->num_properties = ARRAY_SIZE(ds2782_battery_props);
- battery->get_property = ds2782_battery_get_property;
+ battery->properties = ds278x_battery_props;
+ battery->num_properties = ARRAY_SIZE(ds278x_battery_props);
+ battery->get_property = ds278x_battery_get_property;
battery->external_power_changed = NULL;
}
-static int ds2782_battery_remove(struct i2c_client *client)
+static int ds278x_battery_remove(struct i2c_client *client)
{
- struct ds2782_info *info = i2c_get_clientdata(client);
+ struct ds278x_info *info = i2c_get_clientdata(client);
power_supply_unregister(&info->battery);
kfree(info->battery.name);
idr_remove(&battery_id, info->id);
mutex_unlock(&battery_lock);
- i2c_set_clientdata(client, info);
-
kfree(info);
return 0;
}
-static int ds2782_battery_probe(struct i2c_client *client,
+enum ds278x_num_id {
+ DS2782 = 0,
+ DS2786,
+};
+
+static struct ds278x_battery_ops ds278x_ops[] = {
+ [DS2782] = {
+ .get_current = ds2782_get_current,
+ .get_voltage = ds2782_get_voltage,
+ .get_capacity = ds2782_get_capacity,
+ },
+ [DS2786] = {
+ .get_current = ds2786_get_current,
+ .get_voltage = ds2786_get_voltage,
+ .get_capacity = ds2786_get_capacity,
+ }
+};
+
+static int ds278x_battery_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct ds2782_info *info;
+ struct ds278x_platform_data *pdata = client->dev.platform_data;
+ struct ds278x_info *info;
int ret;
int num;
+ /*
+ * ds2786 should have the sense resistor value set
+ * in the platform data
+ */
+ if (id->driver_data == DS2786 && !pdata) {
+ dev_err(&client->dev, "missing platform data for ds2786\n");
+ return -EINVAL;
+ }
+
/* Get an ID for this battery */
ret = idr_pre_get(&battery_id, GFP_KERNEL);
if (ret == 0) {
goto fail_info;
}
- info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
+ info->battery.name = kasprintf(GFP_KERNEL, "%s-%d", client->name, num);
if (!info->battery.name) {
ret = -ENOMEM;
goto fail_name;
}
+ if (id->driver_data == DS2786)
+ info->rsns = pdata->rsns;
+
i2c_set_clientdata(client, info);
info->client = client;
- ds2782_power_supply_init(&info->battery);
+ info->id = num;
+ info->ops = &ds278x_ops[id->driver_data];
+ ds278x_power_supply_init(&info->battery);
ret = power_supply_register(&client->dev, &info->battery);
if (ret) {
fail_register:
kfree(info->battery.name);
fail_name:
- i2c_set_clientdata(client, info);
kfree(info);
fail_info:
mutex_lock(&battery_lock);
return ret;
}
-static const struct i2c_device_id ds2782_id[] = {
- {"ds2782", 0},
+static const struct i2c_device_id ds278x_id[] = {
+ {"ds2782", DS2782},
+ {"ds2786", DS2786},
{},
};
-static struct i2c_driver ds2782_battery_driver = {
+static struct i2c_driver ds278x_battery_driver = {
.driver = {
.name = "ds2782-battery",
},
- .probe = ds2782_battery_probe,
- .remove = ds2782_battery_remove,
- .id_table = ds2782_id,
+ .probe = ds278x_battery_probe,
+ .remove = ds278x_battery_remove,
+ .id_table = ds278x_id,
};
-static int __init ds2782_init(void)
+static int __init ds278x_init(void)
{
- return i2c_add_driver(&ds2782_battery_driver);
+ return i2c_add_driver(&ds278x_battery_driver);
}
-module_init(ds2782_init);
+module_init(ds278x_init);
-static void __exit ds2782_exit(void)
+static void __exit ds278x_exit(void)
{
- i2c_del_driver(&ds2782_battery_driver);
+ i2c_del_driver(&ds278x_battery_driver);
}
-module_exit(ds2782_exit);
+module_exit(ds278x_exit);
MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
static int pda_power_suspend(struct platform_device *pdev, pm_message_t state)
{
+ if (pdata->suspend) {
+ int ret = pdata->suspend(state);
+
+ if (ret)
+ return ret;
+ }
+
if (device_may_wakeup(&pdev->dev)) {
if (ac_irq)
ac_wakeup_enabled = !enable_irq_wake(ac_irq->start);
disable_irq_wake(ac_irq->start);
}
+ if (pdata->resume)
+ return pdata->resume();
+
return 0;
}
#else
#ifdef CONFIG_SYSFS
-extern int power_supply_create_attrs(struct power_supply *psy);
-extern void power_supply_remove_attrs(struct power_supply *psy);
+extern void power_supply_init_attrs(struct device_type *dev_type);
extern int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env);
#else
-static inline int power_supply_create_attrs(struct power_supply *psy)
-{ return 0; }
-static inline void power_supply_remove_attrs(struct power_supply *psy) {}
+static inline void power_supply_init_attrs(struct device_type *dev_type) {}
#define power_supply_uevent NULL
#endif /* CONFIG_SYSFS */
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/power_supply.h>
struct class *power_supply_class;
EXPORT_SYMBOL_GPL(power_supply_class);
+static struct device_type power_supply_dev_type;
+
static int __power_supply_changed_work(struct device *dev, void *data)
{
struct power_supply *psy = (struct power_supply *)data;
}
EXPORT_SYMBOL_GPL(power_supply_get_by_name);
+static void power_supply_dev_release(struct device *dev)
+{
+ pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
+ kfree(dev);
+}
+
int power_supply_register(struct device *parent, struct power_supply *psy)
{
- int rc = 0;
+ struct device *dev;
+ int rc;
- psy->dev = device_create(power_supply_class, parent, 0, psy,
- "%s", psy->name);
- if (IS_ERR(psy->dev)) {
- rc = PTR_ERR(psy->dev);
- goto dev_create_failed;
- }
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
- INIT_WORK(&psy->changed_work, power_supply_changed_work);
+ device_initialize(dev);
- rc = power_supply_create_attrs(psy);
+ dev->class = power_supply_class;
+ dev->type = &power_supply_dev_type;
+ dev->parent = parent;
+ dev->release = power_supply_dev_release;
+ dev_set_drvdata(dev, psy);
+ psy->dev = dev;
+
+ rc = kobject_set_name(&dev->kobj, "%s", psy->name);
+ if (rc)
+ goto kobject_set_name_failed;
+
+ rc = device_add(dev);
if (rc)
- goto create_attrs_failed;
+ goto device_add_failed;
+
+ INIT_WORK(&psy->changed_work, power_supply_changed_work);
rc = power_supply_create_triggers(psy);
if (rc)
goto success;
create_triggers_failed:
- power_supply_remove_attrs(psy);
-create_attrs_failed:
device_unregister(psy->dev);
-dev_create_failed:
+kobject_set_name_failed:
+device_add_failed:
+ kfree(dev);
success:
return rc;
}
{
flush_scheduled_work();
power_supply_remove_triggers(psy);
- power_supply_remove_attrs(psy);
device_unregister(psy->dev);
}
EXPORT_SYMBOL_GPL(power_supply_unregister);
return PTR_ERR(power_supply_class);
power_supply_class->dev_uevent = power_supply_uevent;
+ power_supply_init_attrs(&power_supply_dev_type);
return 0;
}
#define POWER_SUPPLY_ATTR(_name) \
{ \
- .attr = { .name = #_name, .mode = 0444 }, \
+ .attr = { .name = #_name }, \
.show = power_supply_show_property, \
- .store = NULL, \
+ .store = power_supply_store_property, \
}
static struct device_attribute power_supply_attrs[];
static ssize_t power_supply_show_property(struct device *dev,
struct device_attribute *attr,
char *buf) {
+ static char *type_text[] = {
+ "Battery", "UPS", "Mains", "USB"
+ };
static char *status_text[] = {
"Unknown", "Charging", "Discharging", "Not charging", "Full"
};
static char *capacity_level_text[] = {
"Unknown", "Critical", "Low", "Normal", "High", "Full"
};
- ssize_t ret;
+ ssize_t ret = 0;
struct power_supply *psy = dev_get_drvdata(dev);
const ptrdiff_t off = attr - power_supply_attrs;
union power_supply_propval value;
- ret = psy->get_property(psy, off, &value);
+ if (off == POWER_SUPPLY_PROP_TYPE)
+ value.intval = psy->type;
+ else
+ ret = psy->get_property(psy, off, &value);
if (ret < 0) {
if (ret == -ENODATA)
return sprintf(buf, "%s\n", technology_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL)
return sprintf(buf, "%s\n", capacity_level_text[value.intval]);
+ else if (off == POWER_SUPPLY_PROP_TYPE)
+ return sprintf(buf, "%s\n", type_text[value.intval]);
else if (off >= POWER_SUPPLY_PROP_MODEL_NAME)
return sprintf(buf, "%s\n", value.strval);
return sprintf(buf, "%d\n", value.intval);
}
+static ssize_t power_supply_store_property(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count) {
+ ssize_t ret;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ const ptrdiff_t off = attr - power_supply_attrs;
+ union power_supply_propval value;
+ long long_val;
+
+ /* TODO: support other types than int */
+ ret = strict_strtol(buf, 10, &long_val);
+ if (ret < 0)
+ return ret;
+
+ value.intval = long_val;
+
+ ret = psy->set_property(psy, off, &value);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
/* Must be in the same order as POWER_SUPPLY_PROP_* */
static struct device_attribute power_supply_attrs[] = {
/* Properties of type `int' */
POWER_SUPPLY_ATTR(time_to_empty_avg),
POWER_SUPPLY_ATTR(time_to_full_now),
POWER_SUPPLY_ATTR(time_to_full_avg),
+ POWER_SUPPLY_ATTR(type),
/* Properties of type `const char *' */
POWER_SUPPLY_ATTR(model_name),
POWER_SUPPLY_ATTR(manufacturer),
POWER_SUPPLY_ATTR(serial_number),
};
-static ssize_t power_supply_show_static_attrs(struct device *dev,
- struct device_attribute *attr,
- char *buf) {
- static char *type_text[] = { "Battery", "UPS", "Mains", "USB" };
+static struct attribute *
+__power_supply_attrs[ARRAY_SIZE(power_supply_attrs) + 1];
+
+static mode_t power_supply_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr,
+ int attrno)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
struct power_supply *psy = dev_get_drvdata(dev);
+ int i;
- return sprintf(buf, "%s\n", type_text[psy->type]);
-}
+ for (i = 0; i < psy->num_properties; i++) {
+ int property = psy->properties[i];
-static struct device_attribute power_supply_static_attrs[] = {
- __ATTR(type, 0444, power_supply_show_static_attrs, NULL),
-};
+ if (property == attrno) {
+ mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
-int power_supply_create_attrs(struct power_supply *psy)
-{
- int rc = 0;
- int i, j;
-
- for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++) {
- rc = device_create_file(psy->dev,
- &power_supply_static_attrs[i]);
- if (rc)
- goto statics_failed;
- }
+ if (psy->property_is_writeable &&
+ psy->property_is_writeable(psy, property) > 0)
+ mode |= S_IWUSR;
- for (j = 0; j < psy->num_properties; j++) {
- rc = device_create_file(psy->dev,
- &power_supply_attrs[psy->properties[j]]);
- if (rc)
- goto dynamics_failed;
+ return mode;
+ }
}
- goto succeed;
-
-dynamics_failed:
- while (j--)
- device_remove_file(psy->dev,
- &power_supply_attrs[psy->properties[j]]);
-statics_failed:
- while (i--)
- device_remove_file(psy->dev, &power_supply_static_attrs[i]);
-succeed:
- return rc;
+ return 0;
}
-void power_supply_remove_attrs(struct power_supply *psy)
+static struct attribute_group power_supply_attr_group = {
+ .attrs = __power_supply_attrs,
+ .is_visible = power_supply_attr_is_visible,
+};
+
+static const struct attribute_group *power_supply_attr_groups[] = {
+ &power_supply_attr_group,
+ NULL,
+};
+
+void power_supply_init_attrs(struct device_type *dev_type)
{
int i;
- for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++)
- device_remove_file(psy->dev, &power_supply_static_attrs[i]);
+ dev_type->groups = power_supply_attr_groups;
- for (i = 0; i < psy->num_properties; i++)
- device_remove_file(psy->dev,
- &power_supply_attrs[psy->properties[i]]);
+ for (i = 0; i < ARRAY_SIZE(power_supply_attrs); i++)
+ __power_supply_attrs[i] = &power_supply_attrs[i].attr;
}
static char *kstruprdup(const char *str, gfp_t gfp)
if (!prop_buf)
return -ENOMEM;
- for (j = 0; j < ARRAY_SIZE(power_supply_static_attrs); j++) {
- struct device_attribute *attr;
- char *line;
-
- attr = &power_supply_static_attrs[j];
-
- ret = power_supply_show_static_attrs(dev, attr, prop_buf);
- if (ret < 0)
- goto out;
-
- line = strchr(prop_buf, '\n');
- if (line)
- *line = 0;
-
- attrname = kstruprdup(attr->attr.name, GFP_KERNEL);
- if (!attrname) {
- ret = -ENOMEM;
- goto out;
- }
-
- dev_dbg(dev, "Static prop %s=%s\n", attrname, prop_buf);
-
- ret = add_uevent_var(env, "POWER_SUPPLY_%s=%s", attrname, prop_buf);
- kfree(attrname);
- if (ret)
- goto out;
- }
-
- dev_dbg(dev, "%zd dynamic props\n", psy->num_properties);
-
for (j = 0; j < psy->num_properties; j++) {
struct device_attribute *attr;
char *line;
--- /dev/null
+/*
+ * Power supply driver for testing.
+ *
+ * Copyright 2010 Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/vermagic.h>
+
+static int test_power_ac_online = 1;
+static int test_power_battery_status = POWER_SUPPLY_STATUS_CHARGING;
+
+static int test_power_get_ac_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = test_power_ac_online;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int test_power_get_battery_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = "Test battery";
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = "Linux";
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ val->strval = UTS_RELEASE;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = test_power_battery_status;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = 50;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ val->intval = 3600;
+ break;
+ default:
+ pr_info("%s: some properties deliberately report errors.\n",
+ __func__);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property test_power_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property test_power_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static char *test_power_ac_supplied_to[] = {
+ "test_battery",
+};
+
+static struct power_supply test_power_supplies[] = {
+ {
+ .name = "test_ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .supplied_to = test_power_ac_supplied_to,
+ .num_supplicants = ARRAY_SIZE(test_power_ac_supplied_to),
+ .properties = test_power_ac_props,
+ .num_properties = ARRAY_SIZE(test_power_ac_props),
+ .get_property = test_power_get_ac_property,
+ }, {
+ .name = "test_battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = test_power_battery_props,
+ .num_properties = ARRAY_SIZE(test_power_battery_props),
+ .get_property = test_power_get_battery_property,
+ },
+};
+
+static int __init test_power_init(void)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++) {
+ ret = power_supply_register(NULL, &test_power_supplies[i]);
+ if (ret) {
+ pr_err("%s: failed to register %s\n", __func__,
+ test_power_supplies[i].name);
+ goto failed;
+ }
+ }
+
+ return 0;
+failed:
+ while (--i >= 0)
+ power_supply_unregister(&test_power_supplies[i]);
+ return ret;
+}
+module_init(test_power_init);
+
+static void __exit test_power_exit(void)
+{
+ int i;
+
+ /* Let's see how we handle changes... */
+ test_power_ac_online = 0;
+ test_power_battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
+ for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
+ power_supply_changed(&test_power_supplies[i]);
+ pr_info("%s: 'changed' event sent, sleeping for 10 seconds...\n",
+ __func__);
+ ssleep(10);
+
+ for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
+ power_supply_unregister(&test_power_supplies[i]);
+}
+module_exit(test_power_exit);
+
+MODULE_DESCRIPTION("Power supply driver for testing");
+MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
+MODULE_LICENSE("GPL");
mutex_lock(&bat_lock);
gpio_set_value(bat->gpio_bat, 1);
msleep(5);
- value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+ value = wm97xx_read_aux_adc(dev_get_drvdata(bat->psy.dev->parent),
bat->adc_bat);
gpio_set_value(bat->gpio_bat, 0);
mutex_unlock(&bat_lock);
mutex_lock(&bat_lock);
gpio_set_value(bat->gpio_temp, 1);
msleep(5);
- value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+ value = wm97xx_read_aux_adc(dev_get_drvdata(bat->psy.dev->parent),
bat->adc_temp);
gpio_set_value(bat->gpio_temp, 0);
mutex_unlock(&bat_lock);
goto err_battery;
irq = platform_get_irq_byname(pdev, "SYSLO");
- ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq,
- IRQF_TRIGGER_RISING, "SYSLO",
- power);
+ ret = request_threaded_irq(irq, NULL, wm831x_syslo_irq,
+ IRQF_TRIGGER_RISING, "System power low",
+ power);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
irq, ret);
}
irq = platform_get_irq_byname(pdev, "PWR SRC");
- ret = wm831x_request_irq(wm831x, irq, wm831x_pwr_src_irq,
- IRQF_TRIGGER_RISING, "Power source",
- power);
+ ret = request_threaded_irq(irq, NULL, wm831x_pwr_src_irq,
+ IRQF_TRIGGER_RISING, "Power source",
+ power);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n",
irq, ret);
for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
- ret = wm831x_request_irq(wm831x, irq, wm831x_bat_irq,
- IRQF_TRIGGER_RISING,
- wm831x_bat_irqs[i],
- power);
+ ret = request_threaded_irq(irq, NULL, wm831x_bat_irq,
+ IRQF_TRIGGER_RISING,
+ wm831x_bat_irqs[i],
+ power);
if (ret != 0) {
dev_err(&pdev->dev,
"Failed to request %s IRQ %d: %d\n",
err_bat_irq:
for (; i >= 0; i--) {
irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
- wm831x_free_irq(wm831x, irq, power);
+ free_irq(irq, power);
}
irq = platform_get_irq_byname(pdev, "PWR SRC");
- wm831x_free_irq(wm831x, irq, power);
+ free_irq(irq, power);
err_syslo:
irq = platform_get_irq_byname(pdev, "SYSLO");
- wm831x_free_irq(wm831x, irq, power);
+ free_irq(irq, power);
err_usb:
power_supply_unregister(usb);
err_battery:
static __devexit int wm831x_power_remove(struct platform_device *pdev)
{
struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
- struct wm831x *wm831x = wm831x_power->wm831x;
int irq, i;
for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
- wm831x_free_irq(wm831x, irq, wm831x_power);
+ free_irq(irq, wm831x_power);
}
irq = platform_get_irq_byname(pdev, "PWR SRC");
- wm831x_free_irq(wm831x, irq, wm831x_power);
+ free_irq(irq, wm831x_power);
irq = platform_get_irq_byname(pdev, "SYSLO");
- wm831x_free_irq(wm831x, irq, wm831x_power);
+ free_irq(irq, wm831x_power);
power_supply_unregister(&wm831x_power->battery);
power_supply_unregister(&wm831x_power->wall);
platform_driver_unregister(&wm97xx_bat_driver);
}
+/* The interface is deprecated, as well as linux/wm97xx_batt.h */
+void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
+
void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
{
gpdata = data;
--- /dev/null
+/*
+ * Battery measurement code for Zipit Z2
+ *
+ * Copyright (C) 2009 Peter Edwards <sweetlilmre@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <linux/z2_battery.h>
+
+#define Z2_DEFAULT_NAME "Z2"
+
+struct z2_charger {
+ struct z2_battery_info *info;
+ int bat_status;
+ struct i2c_client *client;
+ struct power_supply batt_ps;
+ struct mutex work_lock;
+ struct work_struct bat_work;
+};
+
+static unsigned long z2_read_bat(struct z2_charger *charger)
+{
+ int data;
+ data = i2c_smbus_read_byte_data(charger->client,
+ charger->info->batt_I2C_reg);
+ if (data < 0)
+ return 0;
+
+ return data * charger->info->batt_mult / charger->info->batt_div;
+}
+
+static int z2_batt_get_property(struct power_supply *batt_ps,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct z2_charger *charger = container_of(batt_ps, struct z2_charger,
+ batt_ps);
+ struct z2_battery_info *info = charger->info;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = charger->bat_status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = info->batt_tech;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (info->batt_I2C_reg >= 0)
+ val->intval = z2_read_bat(charger);
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (info->max_voltage >= 0)
+ val->intval = info->max_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ if (info->min_voltage >= 0)
+ val->intval = info->min_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void z2_batt_ext_power_changed(struct power_supply *batt_ps)
+{
+ struct z2_charger *charger = container_of(batt_ps, struct z2_charger,
+ batt_ps);
+ schedule_work(&charger->bat_work);
+}
+
+static void z2_batt_update(struct z2_charger *charger)
+{
+ int old_status = charger->bat_status;
+ struct z2_battery_info *info;
+
+ info = charger->info;
+
+ mutex_lock(&charger->work_lock);
+
+ charger->bat_status = (info->charge_gpio >= 0) ?
+ (gpio_get_value(info->charge_gpio) ?
+ POWER_SUPPLY_STATUS_CHARGING :
+ POWER_SUPPLY_STATUS_DISCHARGING) :
+ POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (old_status != charger->bat_status) {
+ pr_debug("%s: %i -> %i\n", charger->batt_ps.name, old_status,
+ charger->bat_status);
+ power_supply_changed(&charger->batt_ps);
+ }
+
+ mutex_unlock(&charger->work_lock);
+}
+
+static void z2_batt_work(struct work_struct *work)
+{
+ struct z2_charger *charger;
+ charger = container_of(work, struct z2_charger, bat_work);
+ z2_batt_update(charger);
+}
+
+static irqreturn_t z2_charge_switch_irq(int irq, void *devid)
+{
+ struct z2_charger *charger = devid;
+ schedule_work(&charger->bat_work);
+ return IRQ_HANDLED;
+}
+
+static int z2_batt_ps_init(struct z2_charger *charger, int props)
+{
+ int i = 0;
+ enum power_supply_property *prop;
+ struct z2_battery_info *info = charger->info;
+
+ if (info->batt_tech >= 0)
+ props++; /* POWER_SUPPLY_PROP_TECHNOLOGY */
+ if (info->batt_I2C_reg >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_NOW */
+ if (info->max_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MAX */
+ if (info->min_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MIN */
+
+ prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ return -ENOMEM;
+
+ prop[i++] = POWER_SUPPLY_PROP_PRESENT;
+ if (info->charge_gpio >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_STATUS;
+ if (info->batt_tech >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
+ if (info->batt_I2C_reg >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ if (info->max_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ if (info->min_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+
+ if (!info->batt_name) {
+ dev_info(&charger->client->dev,
+ "Please consider setting proper battery "
+ "name in platform definition file, falling "
+ "back to name \" Z2_DEFAULT_NAME \"\n");
+ charger->batt_ps.name = Z2_DEFAULT_NAME;
+ } else
+ charger->batt_ps.name = info->batt_name;
+
+ charger->batt_ps.properties = prop;
+ charger->batt_ps.num_properties = props;
+ charger->batt_ps.type = POWER_SUPPLY_TYPE_BATTERY;
+ charger->batt_ps.get_property = z2_batt_get_property;
+ charger->batt_ps.external_power_changed = z2_batt_ext_power_changed;
+ charger->batt_ps.use_for_apm = 1;
+
+ return 0;
+}
+
+static int __devinit z2_batt_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
+ struct z2_charger *charger;
+ struct z2_battery_info *info = client->dev.platform_data;
+
+ if (info == NULL) {
+ dev_err(&client->dev,
+ "Please set platform device platform_data"
+ " to a valid z2_battery_info pointer!\n");
+ return -EINVAL;
+ }
+
+ charger = kzalloc(sizeof(*charger), GFP_KERNEL);
+ if (charger == NULL)
+ return -ENOMEM;
+
+ charger->bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
+ charger->info = info;
+ charger->client = client;
+ i2c_set_clientdata(client, charger);
+
+ mutex_init(&charger->work_lock);
+
+ if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio)) {
+ ret = gpio_request(info->charge_gpio, "BATT CHRG");
+ if (ret)
+ goto err;
+
+ ret = gpio_direction_input(info->charge_gpio);
+ if (ret)
+ goto err2;
+
+ set_irq_type(gpio_to_irq(info->charge_gpio),
+ IRQ_TYPE_EDGE_BOTH);
+ ret = request_irq(gpio_to_irq(info->charge_gpio),
+ z2_charge_switch_irq, IRQF_DISABLED,
+ "AC Detect", charger);
+ if (ret)
+ goto err3;
+ }
+
+ ret = z2_batt_ps_init(charger, props);
+ if (ret)
+ goto err3;
+
+ INIT_WORK(&charger->bat_work, z2_batt_work);
+
+ ret = power_supply_register(&client->dev, &charger->batt_ps);
+ if (ret)
+ goto err4;
+
+ schedule_work(&charger->bat_work);
+
+ return 0;
+
+err4:
+ kfree(charger->batt_ps.properties);
+err3:
+ if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio))
+ free_irq(gpio_to_irq(info->charge_gpio), charger);
+err2:
+ if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio))
+ gpio_free(info->charge_gpio);
+err:
+ kfree(charger);
+ return ret;
+}
+
+static int __devexit z2_batt_remove(struct i2c_client *client)
+{
+ struct z2_charger *charger = i2c_get_clientdata(client);
+ struct z2_battery_info *info = charger->info;
+
+ flush_scheduled_work();
+ power_supply_unregister(&charger->batt_ps);
+
+ kfree(charger->batt_ps.properties);
+ if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio)) {
+ free_irq(gpio_to_irq(info->charge_gpio), charger);
+ gpio_free(info->charge_gpio);
+ }
+
+ kfree(charger);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int z2_batt_suspend(struct i2c_client *client, pm_message_t state)
+{
+ flush_scheduled_work();
+ return 0;
+}
+
+static int z2_batt_resume(struct i2c_client *client)
+{
+ struct z2_charger *charger = i2c_get_clientdata(client);
+
+ schedule_work(&charger->bat_work);
+ return 0;
+}
+#else
+#define z2_batt_suspend NULL
+#define z2_batt_resume NULL
+#endif
+
+static const struct i2c_device_id z2_batt_id[] = {
+ { "aer915", 0 },
+ { }
+};
+
+static struct i2c_driver z2_batt_driver = {
+ .driver = {
+ .name = "z2-battery",
+ .owner = THIS_MODULE,
+ },
+ .probe = z2_batt_probe,
+ .remove = z2_batt_remove,
+ .suspend = z2_batt_suspend,
+ .resume = z2_batt_resume,
+ .id_table = z2_batt_id,
+};
+
+static int __init z2_batt_init(void)
+{
+ return i2c_add_driver(&z2_batt_driver);
+}
+
+static void __exit z2_batt_exit(void)
+{
+ i2c_del_driver(&z2_batt_driver);
+}
+
+module_init(z2_batt_init);
+module_exit(z2_batt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Edwards <sweetlilmre@gmail.com>");
+MODULE_DESCRIPTION("Zipit Z2 battery driver");
--- /dev/null
+#ifndef __LINUX_DS2782_BATTERY_H
+#define __LINUX_DS2782_BATTERY_H
+
+struct ds278x_platform_data {
+ int rsns;
+};
+
+#endif
int (*is_usb_online)(void);
void (*set_charge)(int flags);
void (*exit)(struct device *dev);
+ int (*suspend)(pm_message_t state);
+ int (*resume)(void);
char **supplied_to;
size_t num_supplicants;
POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+ POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */
/* Properties of type `const char *' */
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
int (*get_property)(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val);
+ int (*set_property)(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val);
+ int (*property_is_writeable)(struct power_supply *psy,
+ enum power_supply_property psp);
void (*external_power_changed)(struct power_supply *psy);
void (*set_charged)(struct power_supply *psy);
--- /dev/null
+#ifndef _LINUX_Z2_BATTERY_H
+#define _LINUX_Z2_BATTERY_H
+
+struct z2_battery_info {
+ int batt_I2C_bus;
+ int batt_I2C_addr;
+ int batt_I2C_reg;
+ int charge_gpio;
+ int min_voltage;
+ int max_voltage;
+ int batt_div;
+ int batt_mult;
+ int batt_tech;
+ char *batt_name;
+};
+
+#endif
git.openpandora.org / pandora-kernel.git / commitdiff