Leonid I Ananiev <leonid.i.ananiev@intel.com>
Linas Vepstas <linas@austin.ibm.com>
Matthieu CASTET <castet.matthieu@free.fr>
+Michael Buesch <mb@bu3sch.de>
+Michael Buesch <mbuesch@freenet.de>
Michel Dänzer <michel@tungstengraphics.com>
Mitesh shah <mshah@teja.com>
Morten Welinder <terra@gnome.org>
--- /dev/null
+What: dv1394 (a.k.a. "OHCI-DV I/O support" for FireWire)
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ New application development should use raw1394 + userspace libraries
+ instead, notably libiec61883 which is functionally equivalent.
+
+Users:
+ ffmpeg/libavformat (used by a variety of media players)
+ dvgrab v1.x (replaced by dvgrab2 on top of raw1394 and resp. libraries)
Add some cpus:
# /bin/echo 0-7 > cpus
+Add some mems:
+# /bin/echo 0-7 > mems
+
Now attach your shell to this cpuset:
# /bin/echo $$ > tasks
---------------------------
-What: dv1394 driver (CONFIG_IEEE1394_DV1394)
-When: June 2007
-Why: Replaced by raw1394 + userspace libraries, notably libiec61883. This
- shift of application support has been indicated on www.linux1394.org
- and developers' mailinglists for quite some time. Major applications
- have been converted, with the exception of ffmpeg and hence xine.
- Piped output of dvgrab2 is a partial equivalent to dv1394.
-Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
-
----------------------------
-
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: December 2006
Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
- Output values are writable (high=1, low=0). Some chips also have
options about how that value is driven, so that for example only one
value might be driven ... supporting "wire-OR" and similar schemes
- for the other value.
+ for the other value (notably, "open drain" signaling).
- Input values are likewise readable (1, 0). Some chips support readback
of pins configured as "output", which is very useful in such "wire-OR"
when the IRQ is edge-triggered.
+Emulating Open Drain Signals
+----------------------------
+Sometimes shared signals need to use "open drain" signaling, where only the
+low signal level is actually driven. (That term applies to CMOS transistors;
+"open collector" is used for TTL.) A pullup resistor causes the high signal
+level. This is sometimes called a "wire-AND"; or more practically, from the
+negative logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain outputs; many don't. When
+you need open drain signaling but your hardware doesn't directly support it,
+there's a common idiom you can use to emulate it with any GPIO pin that can
+be used as either an input or an output:
+
+ LOW: gpio_direction_output(gpio, 0) ... this drives the signal
+ and overrides the pullup.
+
+ HIGH: gpio_direction_input(gpio) ... this turns off the output,
+ so the pullup (or some other device) controls the signal.
+
+If you are "driving" the signal high but gpio_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component
+is driving the shared signal low. That's not necessarily an error. As one
+common example, that's how I2C clocks are stretched: a slave that needs a
+slower clock delays the rising edge of SCK, and the I2C master adjusts its
+signaling rate accordingly.
+
What do these conventions omit?
===============================
See also Documentation/pm.txt, pci=noacpi
+ acpi_apic_instance= [ACPI, IOAPIC]
+ Format: <int>
+ 2: use 2nd APIC table, if available
+ 1,0: use 1st APIC table
+ default: 0
+
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode }
See Documentation/power/video.txt
that require a timer override, but don't have
HPET
- acpi_dbg_layer= [HW,ACPI]
+ acpi.debug_layer= [HW,ACPI]
Format: <int>
Each bit of the <int> indicates an ACPI debug layer,
1: enable, 0: disable. It is useful for boot time
debugging. After system has booted up, it can be set
- via /proc/acpi/debug_layer.
-
- acpi_dbg_level= [HW,ACPI]
+ via /sys/module/acpi/parameters/debug_layer.
+ CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
+ Available bits (add the numbers together) to enable debug output
+ for specific parts of the ACPI subsystem:
+ 0x01 utilities 0x02 hardware 0x04 events 0x08 tables
+ 0x10 namespace 0x20 parser 0x40 dispatcher
+ 0x80 executer 0x100 resources 0x200 acpica debugger
+ 0x400 os services 0x800 acpica disassembler.
+ The number can be in decimal or prefixed with 0x in hex.
+ Warning: Many of these options can produce a lot of
+ output and make your system unusable. Be very careful.
+
+ acpi.debug_level= [HW,ACPI]
Format: <int>
Each bit of the <int> indicates an ACPI debug level,
1: enable, 0: disable. It is useful for boot time
debugging. After system has booted up, it can be set
- via /proc/acpi/debug_level.
+ via /sys/module/acpi/parameters/debug_level.
+ CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
+ Available bits (add the numbers together) to enable different
+ debug output levels of the ACPI subsystem:
+ 0x01 error 0x02 warn 0x04 init 0x08 debug object
+ 0x10 info 0x20 init names 0x40 parse 0x80 load
+ 0x100 dispatch 0x200 execute 0x400 names 0x800 operation region
+ 0x1000 bfield 0x2000 tables 0x4000 values 0x8000 objects
+ 0x10000 resources 0x20000 user requests 0x40000 package.
+ The number can be in decimal or prefixed with 0x in hex.
+ Warning: Many of these options can produce a lot of
+ output and make your system unusable. Be very careful.
+
acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT
lapic [IA-32,APIC] Enable the local APIC even if BIOS
disabled it.
+ lapic_timer_c2_ok [IA-32,x86-64,APIC] trust the local apic timer in
+ C2 power state.
+
lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip
Format: addr:<io>,irq:<irq>
nolapic [IA-32,APIC] Do not enable or use the local APIC.
+ nolapic_timer [IA-32,APIC] Do not use the local APIC timer.
+
noltlbs [PPC] Do not use large page/tlb entries for kernel
lowmem mapping on PPC40x.
To use the amateur radio protocols within Linux you will need to get a
-suitable copy of the AX.25 Utilities. More detailed information about these
-and associated programs can be found on http://zone.pspt.fi/~jsn/.
-
-For more information about the AX.25, NET/ROM and ROSE protocol stacks, see
-the AX25-HOWTO written by Terry Dawson <terry@perf.no.itg.telstra.com.au>
-who is also the AX.25 Utilities maintainer.
+suitable copy of the AX.25 Utilities. More detailed information about
+AX.25, NET/ROM and ROSE, associated programs and and utilities can be
+found on http://www.linux-ax25.org.
There is an active mailing list for discussing Linux amateur radio matters
-called linux-hams. To subscribe to it, send a message to
+called linux-hams@vger.kernel.org. To subscribe to it, send a message to
majordomo@vger.kernel.org with the words "subscribe linux-hams" in the body
-of the message, the subject field is ignored.
-
-Jonathan G4KLX
-
-g4klx@g4klx.demon.co.uk
+of the message, the subject field is ignored. You don't need to be
+subscribed to post but of course that means you might miss an answer.
Functional default: enabled if local forwarding is disabled.
disabled if local forwarding is enabled.
+accept_source_route - INTEGER
+ Accept source routing (routing extension header).
+
+ > 0: Accept routing header.
+ = 0: Accept only routing header type 2.
+ < 0: Do not accept routing header.
+
+ Default: 0
+
autoconf - BOOLEAN
Autoconfigure addresses using Prefix Information in Router
Advertisements.
--------------
Usage:
- pci_save_state(dev, buffer);
+ pci_save_state(struct pci_dev *dev);
Description:
- Save first 64 bytes of PCI config space. Buffer must be allocated by
- caller.
+ Save first 64 bytes of PCI config space, along with any additional
+ PCI-Express or PCI-X information.
pci_restore_state
-----------------
Usage:
- pci_restore_state(dev, buffer);
+ pci_restore_state(struct pci_dev *dev);
Description:
- Restore previously saved config space. (First 64 bytes only);
-
- If buffer is NULL, then restore what information we know about the
- device from bootup: BARs and interrupt line.
+ Restore previously saved config space.
pci_set_power_state
-------------------
Usage:
- pci_set_power_state(dev, state);
+ pci_set_power_state(struct pci_dev *dev, pci_power_t state);
Description:
Transition device to low power state using PCI PM Capabilities
---------------
Usage:
- pci_enable_wake(dev, state, enable);
+ pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
Description:
Enable device to generate PME# during low power state using PCI PM
Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
-This mini-driver drives the SNC device present in the ACPI BIOS of
-the Sony Vaio laptops.
+This mini-driver drives the SNC and SPIC device present in the ACPI BIOS of the
+Sony Vaio laptops. This driver mixes both devices functions under the same
+(hopefully consistent) interface. This also means that the sonypi driver is
+obsoleted by sony-laptop now.
-It gives access to some extra laptop functionalities. In its current
-form, this driver let the user set or query the screen brightness
-through the backlight subsystem and remove/apply power to some devices.
+Fn keys (hotkeys):
+------------------
+Some models report hotkeys through the SNC or SPIC devices, such events are
+reported both through the ACPI subsystem as acpi events and through the INPUT
+subsystem. See the logs of acpid or /proc/acpi/event and
+/proc/bus/input/devices to find out what those events are and which input
+devices are created by the driver.
Backlight control:
------------------
audiopower power on/off the internal sound card
lanpower power on/off the internal ethernet card
(only in debug mode)
+ bluetoothpower power on/off the internal bluetooth device
+ fanspeed get/set the fan speed
Note that some files may be missing if they are not supported
by your particular laptop model.
current ones found on several Vaio models), an entry under
/sys/devices/platform/sony-laptop, just like the 'cdpower' one.
You can create other entries corresponding to your own laptop methods by
-further editing the source (see the 'sony_acpi_values' table, and add a new
+further editing the source (see the 'sony_nc_values' table, and add a new
entry to this table with your get/set method names using the
-HANDLE_NAMES macro).
+SNC_HANDLE_NAMES macro).
Your mission, should you accept it, is to try finding out what
those entries are for, by reading/writing random values from/to those
Should you find anything interesting, please report it back to me,
I will not disavow all knowledge of your actions :)
+See also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers for other
+useful info.
+
Bugs/Limitations:
-----------------
'p' - Will dump the current registers and flags to your console.
+'q' - Will dump a list of all running timers.
+
'r' - Turns off keyboard raw mode and sets it to XLATE.
's' - Will attempt to sync all mounted filesystems.
- IBM ThinkPad ACPI Extras Driver
+ ThinkPad ACPI Extras Driver
- Version 0.12
- 17 August 2005
+ Version 0.14
+ April 21st, 2007
Borislav Deianov <borislav@users.sf.net>
+ Henrique de Moraes Holschuh <hmh@hmh.eng.br>
http://ibm-acpi.sf.net/
-This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports
-various features of these laptops which are accessible through the
-ACPI framework but not otherwise supported by the generic Linux ACPI
-drivers.
+This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
+supports various features of these laptops which are accessible
+through the ACPI and ACPI EC framework, but not otherwise fully
+supported by the generic Linux ACPI drivers.
+
+This driver used to be named ibm-acpi until kernel 2.6.21 and release
+0.13-20070314. It used to be in the drivers/acpi tree, but it was
+moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
+2.6.22, and release 0.14.
Status
- Fn key combinations
- Bluetooth enable and disable
- - video output switching, expansion control
+ - video output switching, expansion control
- ThinkLight on and off
- limited docking and undocking
- UltraBay eject
- Experimental: embedded controller register dump
- LCD brightness control
- Volume control
- - Experimental: fan speed, fan enable/disable
+ - Fan control and monitoring: fan speed, fan enable/disable
- Experimental: WAN enable and disable
A compatibility table by model and feature is maintained on the web
- ThinkPad model name
- a copy of your DSDT, from /proc/acpi/dsdt
+ - a copy of the output of dmidecode, with serial numbers
+ and UUIDs masked off
- which driver features work and which don't
- the observed behavior of non-working features
------------
If you are compiling this driver as included in the Linux kernel
-sources, simply enable the CONFIG_ACPI_IBM option (Power Management /
-ACPI / IBM ThinkPad Laptop Extras).
+sources, simply enable the CONFIG_THINKPAD_ACPI option, and optionally
+enable the CONFIG_THINKPAD_ACPI_BAY option if you want the
+thinkpad-specific bay functionality.
Features
--------
-The driver creates the /proc/acpi/ibm directory. There is a file under
-that directory for each feature described below. Note that while the
-driver is still in the alpha stage, the exact proc file format and
-commands supported by the various features is guaranteed to change
-frequently.
+The driver exports two different interfaces to userspace, which can be
+used to access the features it provides. One is a legacy procfs-based
+interface, which will be removed at some time in the distant future.
+The other is a new sysfs-based interface which is not complete yet.
-Driver version -- /proc/acpi/ibm/driver
----------------------------------------
+The procfs interface creates the /proc/acpi/ibm directory. There is a
+file under that directory for each feature it supports. The procfs
+interface is mostly frozen, and will change very little if at all: it
+will not be extended to add any new functionality in the driver, instead
+all new functionality will be implemented on the sysfs interface.
+
+The sysfs interface tries to blend in the generic Linux sysfs subsystems
+and classes as much as possible. Since some of these subsystems are not
+yet ready or stabilized, it is expected that this interface will change,
+and any and all userspace programs must deal with it.
+
+
+Notes about the sysfs interface:
+
+Unlike what was done with the procfs interface, correctness when talking
+to the sysfs interfaces will be enforced, as will correctness in the
+thinkpad-acpi's implementation of sysfs interfaces.
+
+Also, any bugs in the thinkpad-acpi sysfs driver code or in the
+thinkpad-acpi's implementation of the sysfs interfaces will be fixed for
+maximum correctness, even if that means changing an interface in
+non-compatible ways. As these interfaces mature both in the kernel and
+in thinkpad-acpi, such changes should become quite rare.
+
+Applications interfacing to the thinkpad-acpi sysfs interfaces must
+follow all sysfs guidelines and correctly process all errors (the sysfs
+interface makes extensive use of errors). File descriptors and open /
+close operations to the sysfs inodes must also be properly implemented.
+
+The version of thinkpad-acpi's sysfs interface is exported by the driver
+as a driver attribute (see below).
+
+Sysfs driver attributes are on the driver's sysfs attribute space,
+for 2.6.20 this is /sys/bus/platform/drivers/thinkpad-acpi/.
+
+Sysfs device attributes are on the driver's sysfs attribute space,
+for 2.6.20 this is /sys/devices/platform/thinkpad-acpi/.
+
+Driver version
+--------------
+
+procfs: /proc/acpi/ibm/driver
+sysfs driver attribute: version
The driver name and version. No commands can be written to this file.
-Hot keys -- /proc/acpi/ibm/hotkey
----------------------------------
+Sysfs interface version
+-----------------------
+
+sysfs driver attribute: interface_version
+
+Version of the thinkpad-acpi sysfs interface, as an unsigned long
+(output in hex format: 0xAAAABBCC), where:
+ AAAA - major revision
+ BB - minor revision
+ CC - bugfix revision
+
+The sysfs interface version changelog for the driver can be found at the
+end of this document. Changes to the sysfs interface done by the kernel
+subsystems are not documented here, nor are they tracked by this
+attribute.
+
+Hot keys
+--------
+
+procfs: /proc/acpi/ibm/hotkey
+sysfs device attribute: hotkey/*
Without this driver, only the Fn-F4 key (sleep button) generates an
ACPI event. With the driver loaded, the hotkey feature enabled and the
addition, the lid microswitch and some docking station buttons may
also generate such events.
-The following commands can be written to this file:
-
- echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
- echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
- echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys
- echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
- ... any other 4-hex-digit mask ...
- echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
-
The bit mask allows some control over which hot keys generate ACPI
events. Not all bits in the mask can be modified. Not all bits that
can be modified do anything. Not all hot keys can be individually
be used through the "ThinkPad Buttons" utility, see
http://www.nongnu.org/tpb/
-Bluetooth -- /proc/acpi/ibm/bluetooth
--------------------------------------
+procfs notes:
+
+The following commands can be written to the /proc/acpi/ibm/hotkey file:
+
+ echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
+ echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
+ echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys
+ echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
+ ... any other 4-hex-digit mask ...
+ echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
+
+sysfs notes:
+
+ The hot keys attributes are in a hotkey/ subdirectory off the
+ thinkpad device.
+
+ bios_enabled:
+ Returns the status of the hot keys feature when
+ thinkpad-acpi was loaded. Upon module unload, the hot
+ key feature status will be restored to this value.
+
+ 0: hot keys were disabled
+ 1: hot keys were enabled
+
+ bios_mask:
+ Returns the hot keys mask when thinkpad-acpi was loaded.
+ Upon module unload, the hot keys mask will be restored
+ to this value.
+
+ enable:
+ Enables/disables the hot keys feature, and reports
+ current status of the hot keys feature.
+
+ 0: disables the hot keys feature / feature disabled
+ 1: enables the hot keys feature / feature enabled
+
+ mask:
+ bit mask to enable ACPI event generation for each hot
+ key (see above). Returns the current status of the hot
+ keys mask, and allows one to modify it.
+
-This feature shows the presence and current state of a Bluetooth
-device. If Bluetooth is installed, the following commands can be used:
+Bluetooth
+---------
+
+procfs: /proc/acpi/ibm/bluetooth
+sysfs device attribute: bluetooth/enable
+
+This feature shows the presence and current state of a ThinkPad
+Bluetooth device in the internal ThinkPad CDC slot.
+
+Procfs notes:
+
+If Bluetooth is installed, the following commands can be used:
echo enable > /proc/acpi/ibm/bluetooth
echo disable > /proc/acpi/ibm/bluetooth
+Sysfs notes:
+
+ If the Bluetooth CDC card is installed, it can be enabled /
+ disabled through the "bluetooth/enable" thinkpad-acpi device
+ attribute, and its current status can also be queried.
+
+ enable:
+ 0: disables Bluetooth / Bluetooth is disabled
+ 1: enables Bluetooth / Bluetooth is enabled.
+
+ Note: this interface will be probably be superseeded by the
+ generic rfkill class.
+
Video output control -- /proc/acpi/ibm/video
--------------------------------------------
booted while not in the dock, the following message is shown in the
logs:
- Mar 17 01:42:34 aero kernel: ibm_acpi: dock device not present
+ Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
In this case, no dock-related events are generated but the dock and
undock commands described below still work. They can be executed
in the Linux ACPI framework. If the laptop was booted without the
UltraBay, the following message is shown in the logs:
- Mar 17 01:42:34 aero kernel: ibm_acpi: bay device not present
+ Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
In this case, no bay-related events are generated but the eject
command described below still works. It can be executed manually or
Note: the UltraBay eject support on the 600e/x, A22p and A3x is
EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-CMOS control -- /proc/acpi/ibm/cmos
------------------------------------
+CMOS control
+------------
+
+procfs: /proc/acpi/ibm/cmos
+sysfs device attribute: cmos_command
This feature is used internally by the ACPI firmware to control the
ThinkLight on most newer ThinkPad models. It may also control LCD
brightness, sounds volume and more, but only on some models.
-The commands are non-negative integer numbers:
-
- echo 0 >/proc/acpi/ibm/cmos
- echo 1 >/proc/acpi/ibm/cmos
- echo 2 >/proc/acpi/ibm/cmos
- ...
-
-The range of valid numbers is 0 to 21, but not all have an effect and
-the behavior varies from model to model. Here is the behavior on the
-X40 (tpb is the ThinkPad Buttons utility):
+The range of valid cmos command numbers is 0 to 21, but not all have an
+effect and the behavior varies from model to model. Here is the behavior
+on the X40 (tpb is the ThinkPad Buttons utility):
0 - no effect but tpb reports "Volume down"
1 - no effect but tpb reports "Volume up"
13 - ThinkLight off
14 - no effect but tpb reports ThinkLight status change
+The cmos command interface is prone to firmware split-brain problems, as
+in newer ThinkPads it is just a compatibility layer.
+
LED control -- /proc/acpi/ibm/led
---------------------------------
16 - one medium-pitched beep repeating constantly, stop with 17
17 - stop 16
-Temperature sensors -- /proc/acpi/ibm/thermal
----------------------------------------------
+Temperature sensors
+-------------------
+
+procfs: /proc/acpi/ibm/thermal
+sysfs device attributes: (hwmon) temp*_input
Most ThinkPads include six or more separate temperature sensors but
only expose the CPU temperature through the standard ACPI methods.
This feature shows readings from up to eight different sensors on older
ThinkPads, and it has experimental support for up to sixteen different
-sensors on newer ThinkPads. Readings from sensors that are not available
-return -128.
-
-No commands can be written to this file.
+sensors on newer ThinkPads.
EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the
implementation directly accesses hardware registers and may not work as
8: Bay Battery: secondary sensor
+Procfs notes:
+ Readings from sensors that are not available return -128.
+ No commands can be written to this file.
+
+Sysfs notes:
+ Sensors that are not available return the ENXIO error. This
+ status may change at runtime, as there are hotplug thermal
+ sensors, like those inside the batteries and docks.
+
+ thinkpad-acpi thermal sensors are reported through the hwmon
+ subsystem, and follow all of the hwmon guidelines at
+ Documentation/hwmon.
+
+
EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
------------------------------------------------------------------------
registers. Values which have changed since the last time the registers
were dumped are marked with a star:
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
+[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00
EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00
the fan speed fluctuates a bit. The third will (hopefully) mark the
fan register with a star:
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
+[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00
EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00
with this, do send me your results (including some complete dumps with
a description of the conditions when they were taken.)
-LCD brightness control -- /proc/acpi/ibm/brightness
----------------------------------------------------
+LCD brightness control
+----------------------
+
+procfs: /proc/acpi/ibm/brightness
+sysfs backlight device "thinkpad_screen"
This feature allows software control of the LCD brightness on ThinkPad
-models which don't have a hardware brightness slider. The available
-commands are:
+models which don't have a hardware brightness slider.
+
+It has some limitations: the LCD backlight cannot be actually turned on or off
+by this interface, and in many ThinkPad models, the "dim while on battery"
+functionality will be enabled by the BIOS when this interface is used, and
+cannot be controlled.
+
+The backlight control has eight levels, ranging from 0 to 7. Some of the
+levels may not be distinct.
+
+Procfs notes:
+
+ The available commands are:
echo up >/proc/acpi/ibm/brightness
echo down >/proc/acpi/ibm/brightness
echo 'level <level>' >/proc/acpi/ibm/brightness
-The <level> number range is 0 to 7, although not all of them may be
-distinct. The current brightness level is shown in the file.
+Sysfs notes:
+
+The interface is implemented through the backlight sysfs class, which is poorly
+documented at this time.
+
+Locate the thinkpad_screen device under /sys/class/backlight, and inside it
+there will be the following attributes:
+
+ max_brightness:
+ Reads the maximum brightness the hardware can be set to.
+ The minimum is always zero.
+
+ actual_brightness:
+ Reads what brightness the screen is set to at this instant.
+
+ brightness:
+ Writes request the driver to change brightness to the given
+ value. Reads will tell you what brightness the driver is trying
+ to set the display to when "power" is set to zero and the display
+ has not been dimmed by a kernel power management event.
+
+ power:
+ power management mode, where 0 is "display on", and 1 to 3 will
+ dim the display backlight to brightness level 0 because
+ thinkpad-acpi cannot really turn the backlight off. Kernel
+ power management events can temporarily increase the current
+ power management level, i.e. they can dim the display.
+
Volume control -- /proc/acpi/ibm/volume
---------------------------------------
up or down command (the level command will not unmute the volume).
The current volume level and mute state is shown in the file.
-EXPERIMENTAL: fan speed, fan enable/disable -- /proc/acpi/ibm/fan
------------------------------------------------------------------
+Fan control and monitoring: fan speed, fan enable/disable
+---------------------------------------------------------
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
+procfs: /proc/acpi/ibm/fan
+sysfs device attributes: (hwmon) fan_input, pwm1, pwm1_enable
+
+NOTE NOTE NOTE: fan control operations are disabled by default for
+safety reasons. To enable them, the module parameter "fan_control=1"
+must be given to thinkpad-acpi.
This feature attempts to show the current fan speed, control mode and
other fan data that might be available. The speed is read directly
from the hardware registers of the embedded controller. This is known
-to work on later R, T and X series ThinkPads but may show a bogus
+to work on later R, T, X and Z series ThinkPads but may show a bogus
value on other models.
-Most ThinkPad fans work in "levels". Level 0 stops the fan. The higher
-the level, the higher the fan speed, although adjacent levels often map
-to the same fan speed. 7 is the highest level, where the fan reaches
-the maximum recommended speed. Level "auto" means the EC changes the
-fan level according to some internal algorithm, usually based on
-readings from the thermal sensors. Level "disengaged" means the EC
-disables the speed-locked closed-loop fan control, and drives the fan as
-fast as it can go, which might exceed hardware limits, so use this level
-with caution.
+Fan levels:
-The fan usually ramps up or down slowly from one speed to another,
-and it is normal for the EC to take several seconds to react to fan
-commands.
+Most ThinkPad fans work in "levels" at the firmware interface. Level 0
+stops the fan. The higher the level, the higher the fan speed, although
+adjacent levels often map to the same fan speed. 7 is the highest
+level, where the fan reaches the maximum recommended speed.
-The fan may be enabled or disabled with the following commands:
+Level "auto" means the EC changes the fan level according to some
+internal algorithm, usually based on readings from the thermal sensors.
- echo enable >/proc/acpi/ibm/fan
- echo disable >/proc/acpi/ibm/fan
+There is also a "full-speed" level, also known as "disengaged" level.
+In this level, the EC disables the speed-locked closed-loop fan control,
+and drives the fan as fast as it can go, which might exceed hardware
+limits, so use this level with caution.
-Placing a fan on level 0 is the same as disabling it. Enabling a fan
-will try to place it in a safe level if it is too slow or disabled.
+The fan usually ramps up or down slowly from one speed to another, and
+it is normal for the EC to take several seconds to react to fan
+commands. The full-speed level may take up to two minutes to ramp up to
+maximum speed, and in some ThinkPads, the tachometer readings go stale
+while the EC is transitioning to the full-speed level.
WARNING WARNING WARNING: do not leave the fan disabled unless you are
monitoring all of the temperature sensor readings and you are ready to
HDD temperature drops to 41 degrees. These thresholds cannot
currently be controlled.
+The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
+certain conditions are met. It will override any fan programming done
+through thinkpad-acpi.
+
+The thinkpad-acpi kernel driver can be programmed to revert the fan
+level to a safe setting if userspace does not issue one of the procfs
+fan commands: "enable", "disable", "level" or "watchdog", or if there
+are no writes to pwm1_enable (or to pwm1 *if and only if* pwm1_enable is
+set to 1, manual mode) within a configurable amount of time of up to
+120 seconds. This functionality is called fan safety watchdog.
+
+Note that the watchdog timer stops after it enables the fan. It will be
+rearmed again automatically (using the same interval) when one of the
+above mentioned fan commands is received. The fan watchdog is,
+therefore, not suitable to protect against fan mode changes made through
+means other than the "enable", "disable", and "level" procfs fan
+commands, or the hwmon fan control sysfs interface.
+
+Procfs notes:
+
+The fan may be enabled or disabled with the following commands:
+
+ echo enable >/proc/acpi/ibm/fan
+ echo disable >/proc/acpi/ibm/fan
+
+Placing a fan on level 0 is the same as disabling it. Enabling a fan
+will try to place it in a safe level if it is too slow or disabled.
+
The fan level can be controlled with the command:
- echo 'level <level>' > /proc/acpi/ibm/thermal
+ echo 'level <level>' > /proc/acpi/ibm/fan
-Where <level> is an integer from 0 to 7, or one of the words "auto"
-or "disengaged" (without the quotes). Not all ThinkPads support the
-"auto" and "disengaged" levels.
+Where <level> is an integer from 0 to 7, or one of the words "auto" or
+"full-speed" (without the quotes). Not all ThinkPads support the "auto"
+and "full-speed" levels. The driver accepts "disengaged" as an alias for
+"full-speed", and reports it as "disengaged" for backwards
+compatibility.
On the X31 and X40 (and ONLY on those models), the fan speed can be
-controlled to a certain degree. Once the fan is running, it can be
+controlled to a certain degree. Once the fan is running, it can be
forced to run faster or slower with the following command:
- echo 'speed <speed>' > /proc/acpi/ibm/thermal
+ echo 'speed <speed>' > /proc/acpi/ibm/fan
-The sustainable range of fan speeds on the X40 appears to be from
-about 3700 to about 7350. Values outside this range either do not have
-any effect or the fan speed eventually settles somewhere in that
-range. The fan cannot be stopped or started with this command.
+The sustainable range of fan speeds on the X40 appears to be from about
+3700 to about 7350. Values outside this range either do not have any
+effect or the fan speed eventually settles somewhere in that range. The
+fan cannot be stopped or started with this command. This functionality
+is incomplete, and not available through the sysfs interface.
-The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
-certain conditions are met. It will override any fan programming done
-through ibm-acpi.
+To program the safety watchdog, use the "watchdog" command.
-EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
----------------------------------------
+ echo 'watchdog <interval in seconds>' > /proc/acpi/ibm/fan
+
+If you want to disable the watchdog, use 0 as the interval.
+
+Sysfs notes:
+
+The sysfs interface follows the hwmon subsystem guidelines for the most
+part, and the exception is the fan safety watchdog.
+
+Writes to any of the sysfs attributes may return the EINVAL error if
+that operation is not supported in a given ThinkPad or if the parameter
+is out-of-bounds, and EPERM if it is forbidden. They may also return
+EINTR (interrupted system call), and EIO (I/O error while trying to talk
+to the firmware).
+
+Features not yet implemented by the driver return ENOSYS.
+
+hwmon device attribute pwm1_enable:
+ 0: PWM offline (fan is set to full-speed mode)
+ 1: Manual PWM control (use pwm1 to set fan level)
+ 2: Hardware PWM control (EC "auto" mode)
+ 3: reserved (Software PWM control, not implemented yet)
+
+ Modes 0 and 2 are not supported by all ThinkPads, and the
+ driver is not always able to detect this. If it does know a
+ mode is unsupported, it will return -EINVAL.
+
+hwmon device attribute pwm1:
+ Fan level, scaled from the firmware values of 0-7 to the hwmon
+ scale of 0-255. 0 means fan stopped, 255 means highest normal
+ speed (level 7).
+
+ This attribute only commands the fan if pmw1_enable is set to 1
+ (manual PWM control).
+
+hwmon device attribute fan1_input:
+ Fan tachometer reading, in RPM. May go stale on certain
+ ThinkPads while the EC transitions the PWM to offline mode,
+ which can take up to two minutes. May return rubbish on older
+ ThinkPads.
+
+driver attribute fan_watchdog:
+ Fan safety watchdog timer interval, in seconds. Minimum is
+ 1 second, maximum is 120 seconds. 0 disables the watchdog.
+
+To stop the fan: set pwm1 to zero, and pwm1_enable to 1.
+
+To start the fan in a safe mode: set pwm1_enable to 2. If that fails
+with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
+would be the safest choice, though).
+
+
+EXPERIMENTAL: WAN
+-----------------
+
+procfs: /proc/acpi/ibm/wan
+sysfs device attribute: wwan/enable
This feature is marked EXPERIMENTAL because the implementation
directly accesses hardware registers and may not work as expected. USE
WITH CAUTION! To use this feature, you need to supply the
experimental=1 parameter when loading the module.
-This feature shows the presence and current state of a WAN (Sierra
-Wireless EV-DO) device. If WAN is installed, the following commands can
-be used:
+This feature shows the presence and current state of a W-WAN (Sierra
+Wireless EV-DO) device.
+
+It was tested on a Lenovo Thinkpad X60. It should probably work on other
+Thinkpad models which come with this module installed.
+
+Procfs notes:
+
+If the W-WAN card is installed, the following commands can be used:
echo enable > /proc/acpi/ibm/wan
echo disable > /proc/acpi/ibm/wan
-It was tested on a Lenovo Thinkpad X60. It should probably work on other
-Thinkpad models which come with this module installed.
+Sysfs notes:
+
+ If the W-WAN card is installed, it can be enabled /
+ disabled through the "wwan/enable" thinkpad-acpi device
+ attribute, and its current status can also be queried.
+
+ enable:
+ 0: disables WWAN card / WWAN card is disabled
+ 1: enables WWAN card / WWAN card is enabled.
+
+ Note: this interface will be probably be superseeded by the
+ generic rfkill class.
Multiple Commands, Module Parameters
------------------------------------
echo enable,0xffff > /proc/acpi/ibm/hotkey
echo lcd_disable,crt_enable > /proc/acpi/ibm/video
-Commands can also be specified when loading the ibm_acpi module, for
-example:
-
- modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable
-
-The ibm-acpi kernel driver can be programmed to revert the fan level
-to a safe setting if userspace does not issue one of the fan commands:
-"enable", "disable", "level" or "watchdog" within a configurable
-ammount of time. To do this, use the "watchdog" command.
-
- echo 'watchdog <interval>' > /proc/acpi/ibm/fan
-
-Interval is the ammount of time in seconds to wait for one of the
-above mentioned fan commands before reseting the fan level to a safe
-one. If set to zero, the watchdog is disabled (default). When the
-watchdog timer runs out, it does the exact equivalent of the "enable"
-fan command.
-
-Note that the watchdog timer stops after it enables the fan. It will
-be rearmed again automatically (using the same interval) when one of
-the above mentioned fan commands is received. The fan watchdog is,
-therefore, not suitable to protect against fan mode changes made
-through means other than the "enable", "disable", and "level" fan
-commands.
-
-
-Example Configuration
----------------------
-
-The ACPI support in the kernel is intended to be used in conjunction
-with a user-space daemon, acpid. The configuration files for this
-daemon control what actions are taken in response to various ACPI
-events. An example set of configuration files are included in the
-config/ directory of the tarball package available on the web
-site. Note that these are provided for illustration purposes only and
-may need to be adapted to your particular setup.
-
-The following utility scripts are used by the example action
-scripts (included with ibm-acpi for completeness):
-
- /usr/local/sbin/idectl -- from the hdparm source distribution,
- see http://www.ibiblio.org/pub/Linux/system/hardware
- /usr/local/sbin/laptop_mode -- from the Linux kernel source
- distribution, see Documentation/laptop-mode.txt
- /sbin/service -- comes with Redhat/Fedora distributions
- /usr/sbin/hibernate -- from the Software Suspend 2 distribution,
- see http://softwaresuspend.berlios.de/
-
-Toan T Nguyen <ntt@physics.ucla.edu> notes that Suse uses the
-powersave program to suspend ('powersave --suspend-to-ram') or
-hibernate ('powersave --suspend-to-disk'). This means that the
-hibernate script is not needed on that distribution.
-
-Henrik Brix Andersen <brix@gentoo.org> has written a Gentoo ACPI event
-handler script for the X31. You can get the latest version from
-http://dev.gentoo.org/~brix/files/x31.sh
-
-David Schweikert <dws@ee.eth.ch> has written an alternative blank.sh
-script which works on Debian systems. This scripts has now been
-extended to also work on Fedora systems and included as the default
-blank.sh in the distribution.
+Commands can also be specified when loading the thinkpad-acpi module,
+for example:
+
+ modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
+
+Enabling debugging output
+-------------------------
+
+The module takes a debug paramater which can be used to selectively
+enable various classes of debugging output, for example:
+
+ modprobe ibm_acpi debug=0xffff
+
+will enable all debugging output classes. It takes a bitmask, so
+to enable more than one output class, just add their values.
+
+ Debug bitmask Description
+ 0x0001 Initialization and probing
+ 0x0002 Removal
+
+There is also a kernel build option to enable more debugging
+information, which may be necessary to debug driver problems.
+
+The level of debugging information output by the driver can be changed
+at runtime through sysfs, using the driver attribute debug_level. The
+attribute takes the same bitmask as the debug module parameter above.
+
+Force loading of module
+-----------------------
+
+If thinkpad-acpi refuses to detect your ThinkPad, you can try to specify
+the module parameter force_load=1. Regardless of whether this works or
+not, please contact ibm-acpi-devel@lists.sourceforge.net with a report.
+
+
+Sysfs interface changelog:
+
+0x000100: Initial sysfs support, as a single platform driver and
+ device.
Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
This driver enable the use of video4linux compatible applications with the
-Motion Eye camera. This driver requires the "Sony Vaio Programmable I/O
-Control Device" driver (which can be found in the "Character drivers"
-section of the kernel configuration utility) to be compiled and installed
-(using its "camera=1" parameter).
+Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which
+can be found in the "Misc devices" section of the kernel configuration utility)
+to be compiled and installed (using its "camera=1" parameter).
It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480.
stuck (default)
Miscellaneous
-
- noreplacement Don't replace instructions with more appropriate ones
- for the CPU. This may be useful on asymmetric MP systems
- where some CPUs have less capabilities than others.
W: http://www.stud.uni-karlsruhe.de/~uh1b/
S: Maintained
+IPS SCSI RAID DRIVER
+P: Adaptec OEM Raid Solutions
+M: aacraid@adaptec.com
+L: linux-scsi@vger.kernel.org
+W: http://www.adaptec.com/
+S: Maintained
+
+DPT_I2O SCSI RAID DRIVER
+P: Adaptec OEM Raid Solutions
+M: aacraid@adaptec.com
+L: linux-scsi@vger.kernel.org
+W: http://www.adaptec.com/
+S: Maintained
+
AACRAID SCSI RAID DRIVER
P: Adaptec OEM Raid Solutions
+M: aacraid@adaptec.com
L: linux-scsi@vger.kernel.org
-W: http://linux.dell.com/storage.shtml
+W: http://www.adaptec.com/
S: Supported
ACPI
ETHERNET BRIDGE
P: Stephen Hemminger
M: shemminger@linux-foundation.org
-L: bridge@lists.osdl.org
+L: bridge@lists.linux-foundation.org
W: http://bridge.sourceforge.net/
S: Maintained
W: http://www.farsite.co.uk/
S: Supported
+FAULT INJECTION SUPPORT
+P: Akinobu Mita
+M: akinobu.mita@gmail.com
+S: Supported
+
FRAMEBUFFER LAYER
P: Antonino Daplas
M: adaplas@gmail.com
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
S: Maintained
-FUJITSU FR-V PORT
+FUJITSU FR-V (FRV) PORT
P: David Howells
M: dhowells@redhat.com
S: Maintained
T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
S: Maintained
-I2O
-P: Markus Lidel
-M: markus.lidel@shadowconnect.com
-W: http://i2o.shadowconnect.com/
-S: Maintained
-
i386 BOOT CODE
P: Riley H. Williams
M: Riley@Williams.Name
T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
S: Maintained
-IBM ACPI EXTRAS DRIVER
-P: Henrique de Moraes Holschuh
-M: ibm-acpi@hmh.eng.br
-L: ibm-acpi-devel@lists.sourceforge.net
-W: http://ibm-acpi.sourceforge.net
-W: http://thinkwiki.org/wiki/Ibm-acpi
-T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
-S: Maintained
-
SN-IA64 (Itanium) SUB-PLATFORM
P: Jes Sorensen
M: jes@sgi.com
IEEE 1394 SUBSYSTEM
P: Ben Collins
-M: bcollins@debian.org
+M: ben.collins@ubuntu.com
P: Stefan Richter
M: stefanr@s5r6.in-berlin.de
L: linux1394-devel@lists.sourceforge.net
T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
S: Maintained
-IEEE 1394 IPV4 DRIVER (eth1394)
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
-L: linux1394-devel@lists.sourceforge.net
-S: Odd Fixes
-
-IEEE 1394 PCILYNX DRIVER
-P: Jody McIntyre
-M: scjody@modernduck.com
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
-L: linux1394-devel@lists.sourceforge.net
-S: Odd Fixes
-
-IEEE 1394 RAW I/O DRIVER
-P: Ben Collins
-M: bcollins@debian.org
+IEEE 1394 RAW I/O DRIVER (raw1394)
P: Dan Dennedy
M: dan@dennedy.org
+P: Stefan Richter
+M: stefanr@s5r6.in-berlin.de
L: linux1394-devel@lists.sourceforge.net
S: Maintained
M: vgoyal@in.ibm.com
P: Haren Myneni
M: hbabu@us.ibm.com
-L: fastboot@lists.osdl.org
+L: fastboot@lists.linux-foundation.org
L: linux-kernel@vger.kernel.org
W: http://lse.sourceforge.net/kdump/
S: Maintained
KERNEL JANITORS
P: Several
-L: kernel-janitors@lists.osdl.org
+L: kernel-janitors@lists.linux-foundation.org
W: http://www.kerneljanitors.org/
S: Maintained
M: ebiederm@xmission.com
W: http://www.xmission.com/~ebiederm/files/kexec/
L: linux-kernel@vger.kernel.org
-L: fastboot@lists.osdl.org
+L: fastboot@lists.linux-foundation.org
S: Maintained
KPROBES
NETEM NETWORK EMULATOR
P: Stephen Hemminger
M: shemminger@linux-foundation.org
-L: netem@lists.osdl.org
+L: netem@lists.linux-foundation.org
S: Maintained
NETFILTER/IPTABLES/IPCHAINS
S: Maintained
SCTP PROTOCOL
+P: Vlad Yasevich
+M: vladislav.yasevich@hp.com
P: Sridhar Samudrala
M: sri@us.ibm.com
L: lksctp-developers@lists.sourceforge.net
+W: http://lksctp.sourceforge.net
S: Supported
SCx200 CPU SUPPORT
SOFTWARE SUSPEND:
P: Pavel Machek
M: pavel@suse.cz
-L: linux-pm@lists.osdl.org
+L: linux-pm@lists.linux-foundation.org
S: Maintained
SONIC NETWORK DRIVER
S: Maintained
SONY VAIO CONTROL DEVICE DRIVER
-P: Stelian Pop
-M: stelian@popies.net
P: Mattia Dongili
M: malattia@linux.it
-W: http://popies.net/sonypi/
+L: linux-acpi@vger.kernel.org
+W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
S: Maintained
SOUND
M: chris@zankel.net
S: Maintained
+THINKPAD ACPI EXTRAS DRIVER
+P: Henrique de Moraes Holschuh
+M: ibm-acpi@hmh.eng.br
+L: ibm-acpi-devel@lists.sourceforge.net
+W: http://ibm-acpi.sourceforge.net
+W: http://thinkwiki.org/wiki/Ibm-acpi
+T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
+S: Maintained
+
UltraSPARC (sparc64):
P: David S. Miller
M: davem@davemloft.net
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 21
-EXTRAVERSION = -rc4
+EXTRAVERSION =
NAME = Nocturnal Monster Puppy
# *DOCUMENTATION*
# define DBG_CFG(args)
#endif
-#define MCPCIA_MAX_HOSES 4
-
/*
* Given a bus, device, and function number, compute resulting
* configuration space address and setup the MCPCIA_HAXR2 register
#include <asm/smp.h>
#include <asm/err_common.h>
#include <asm/err_ev6.h>
+#include <asm/irq_regs.h>
#include "err_impl.h"
#include "proto.h"
reloc_overflow:
if (ELF64_ST_TYPE (sym->st_info) == STT_SECTION)
printk(KERN_ERR
- "module %s: Relocation overflow vs section %d\n",
- me->name, sym->st_shndx);
+ "module %s: Relocation (type %lu) overflow vs section %d\n",
+ me->name, r_type, sym->st_shndx);
else
printk(KERN_ERR
- "module %s: Relocation overflow vs %s\n",
- me->name, strtab + sym->st_name);
+ "module %s: Relocation (type %lu) overflow vs %s\n",
+ me->name, r_type, strtab + sym->st_name);
return -ENOEXEC;
}
}
/* Preserve the IRQ set up by the console. */
u8 irq;
+ /* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as
+ console reports. Check the device id of AGP bridge to distinguish
+ UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */
+ if (slot == 1 && pin == 2 &&
+ dev->bus->self && dev->bus->self->device == 0x700f)
+ return 5;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
return irq;
}
return 0;
}
+static void
+noritake_end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ noritake_enable_irq(irq);
+}
+
static struct hw_interrupt_type noritake_irq_type = {
.typename = "NORITAKE",
.startup = noritake_startup_irq,
.enable = noritake_enable_irq,
.disable = noritake_disable_irq,
.ack = noritake_disable_irq,
- .end = noritake_enable_irq,
+ .end = noritake_end_irq,
};
static void
*(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(hose));
}
+#define hose_exists(h) \
+ (((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
+
static inline void
rawhide_enable_irq(unsigned int irq)
{
irq -= 16;
hose = irq / 24;
+ if (!hose_exists(hose)) /* if hose non-existent, exit */
+ return;
+
irq -= hose * 24;
mask = 1 << irq;
irq -= 16;
hose = irq / 24;
+ if (!hose_exists(hose)) /* if hose non-existent, exit */
+ return;
+
irq -= hose * 24;
mask = ~(1 << irq) | hose_irq_masks[hose];
irq -= 16;
hose = irq / 24;
+ if (!hose_exists(hose)) /* if hose non-existent, exit */
+ return;
+
irq -= hose * 24;
mask1 = 1 << irq;
mask = ~mask1 | hose_irq_masks[hose];
mcpcia_init_hoses();
+ /* Clear them all; only hoses that exist will be non-zero. */
+ for (i = 0; i < MCPCIA_MAX_HOSES; i++) cached_irq_masks[i] = 0;
+
for (hose = hose_head; hose; hose = hose->next) {
unsigned int h = hose->index;
unsigned int mask = hose_irq_masks[h];
static void __init
sio_pci_route(void)
{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
- /* First, read and save the original setting. */
+ unsigned int orig_route_tab;
+
+ /* First, ALWAYS read and print the original setting. */
pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- &saved_config.orig_route_tab);
+ &orig_route_tab);
printk("%s: PIRQ original 0x%x new 0x%x\n", __FUNCTION__,
- saved_config.orig_route_tab, alpha_mv.sys.sio.route_tab);
+ orig_route_tab, alpha_mv.sys.sio.route_tab);
+
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+ saved_config.orig_route_tab = orig_route_tab;
#endif
/* Now override with desired setting. */
.pci_swizzle = common_swizzle,
.sys = { .sio = {
- .route_tab = 0x0b0a0e0f,
+ .route_tab = 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
}}
};
ALIAS_MV(avanti)
if (amask(AMASK_MAX) != 0
&& alpha_using_srm
- && (cpu->pal_revision & 0xffff) == 0x117) {
+ && (cpu->pal_revision & 0xffff) <= 0x117) {
__asm__ __volatile__(
"lda $16,8($31)\n"
"call_pal 9\n" /* Allow PALRES insns in kernel mode */
*/
while (mask) {
/* convert to SRM vector... priority is <63> -> <0> */
- __asm__("ctlz %1, %0" : "=r"(vector) : "r"(mask));
- vector = 63 - vector;
+ vector = 63 - __kernel_ctlz(mask);
mask &= ~(1UL << vector); /* clear it out */
vector = 0x900 + (vector << 4); /* convert to SRM vector */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc1
-# Wed Feb 21 16:48:01 2007
+# Linux kernel version: 2.6.21-rc6
+# Mon Apr 9 10:12:58 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_NO_IOPORT=y
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_BLK_DEV_IDE_BAST=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# LED drivers
#
CONFIG_LEDS_S3C24XX=m
+CONFIG_LEDS_H1940=m
#
# LED Triggers
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_S3C=y
{
return dma_chan[channel].active;
}
+EXPORT_SYMBOL(dma_channel_active);
void set_dma_page(dmach_t channel, char pagenr)
{
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
- | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
if (data->bus_width_16)
mode = AT91_SMC_DBW_16;
else
mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
/* enable pin */
if (data->enable_pin)
comment "IOP32x Platform Types"
+config MACH_EP80219
+ bool
+
config MACH_GLANTANK
bool "Enable support for the IO-Data GLAN Tank"
help
config ARCH_IQ31244
bool "Enable support for EP80219/IQ31244"
+ select MACH_EP80219
help
Say Y here if you want to run your kernel on the Intel EP80219
evaluation kit for the Intel 80219 processor (a IOP321 variant)
#include <asm/arch/time.h>
/*
- * The EP80219 and IQ31244 use the same machine ID. To find out
- * which of the two we're running on, we look at the processor ID.
+ * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
+ * same machine id, and the processor type was used to select board type.
+ * However this assumption breaks for an iq80219 board which is an iop219
+ * processor on an iq31244 board. The force_ep80219 flag has been added
+ * for old boot loaders using the iq31244 machine id for an ep80219 platform.
*/
+static int force_ep80219;
+
static int is_80219(void)
{
extern int processor_id;
return !!((processor_id & 0xffffffe0) == 0x69052e20);
}
+static int is_ep80219(void)
+{
+ if (machine_is_ep80219() || force_ep80219)
+ return 1;
+ else
+ return 0;
+}
+
/*
* EP80219/IQ31244 timer tick configuration.
*/
static void __init iq31244_timer_init(void)
{
- if (is_80219()) {
+ if (is_ep80219()) {
/* 33.333 MHz crystal. */
iop_init_time(200000000);
} else {
static int __init iq31244_pci_init(void)
{
- if (machine_is_iq31244()) {
+ if (is_ep80219())
+ pci_common_init(&ep80219_pci);
+ else if (machine_is_iq31244()) {
if (is_80219()) {
- pci_common_init(&ep80219_pci);
- } else {
- pci_common_init(&iq31244_pci);
+ printk("note: iq31244 board type has been selected\n");
+ printk("note: to select ep80219 operation:\n");
+ printk("\t1/ specify \"force_ep80219\" on the kernel"
+ " command line\n");
+ printk("\t2/ update boot loader to pass"
+ " the ep80219 id: %d\n", MACH_TYPE_EP80219);
}
+ pci_common_init(&iq31244_pci);
}
return 0;
platform_device_register(&iq31244_flash_device);
platform_device_register(&iq31244_serial_device);
- if (is_80219())
+ if (is_ep80219())
pm_power_off = ep80219_power_off;
}
+static int __init force_ep80219_setup(char *str)
+{
+ force_ep80219 = 1;
+ return 1;
+}
+
+__setup("force_ep80219", force_ep80219_setup);
+
MACHINE_START(IQ31244, "Intel IQ31244")
/* Maintainer: Intel Corp. */
.phys_io = IQ31244_UART,
.timer = &iq31244_timer,
.init_machine = iq31244_init_machine,
MACHINE_END
+
+/* There should have been an ep80219 machine identifier from the beginning.
+ * Boot roms older than March 2007 do not know the ep80219 machine id. Pass
+ * "force_ep80219" on the kernel command line, otherwise iq31244 operation
+ * will be selected.
+ */
+MACHINE_START(EP80219, "Intel EP80219")
+ /* Maintainer: Intel Corp. */
+ .phys_io = IQ31244_UART,
+ .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = iq31244_map_io,
+ .init_irq = iop32x_init_irq,
+ .timer = &iq31244_timer,
+ .init_machine = iq31244_init_machine,
+MACHINE_END
/* setup PM */
+#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
s3c2410_pm_init();
}
static void __init rx3715_init_machine(void)
{
+#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
s3c2410_pm_init();
s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
{
- s3c2443_irq_demux(IRQ_S3C2443_DMA1, 6);
+ s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6);
}
#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Tue Jan 16 16:52:56 2007
+# Last update: Mon Apr 16 21:01:04 2007
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
bug MACH_BUG BUG 1179
mx33ads MACH_MX33ADS MX33ADS 1180
chub MACH_CHUB CHUB 1181
-gta01 MACH_GTA01 GTA01 1182
+neo1973_gta01 MACH_NEO1973_GTA01 NEO1973_GTA01 1182
w90n740 MACH_W90N740 W90N740 1183
medallion_sa2410 MACH_MEDALLION_SA2410 MEDALLION_SA2410 1184
ia_cpu_9200_2 MACH_IA_CPU_9200_2 IA_CPU_9200_2 1185
dimmrm9200 MACH_DIMMRM9200 DIMMRM9200 1186
pm9261 MACH_PM9261 PM9261 1187
-mx21 MACH_MX21 MX21 1188
ml7304 MACH_ML7304 ML7304 1189
ucp250 MACH_UCP250 UCP250 1190
intboard MACH_INTBOARD INTBOARD 1191
tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
zylonite MACH_ZYLONITE ZYLONITE 1233
gene1270 MACH_GENE1270 GENE1270 1234
+zir2412 MACH_ZIR2412 ZIR2412 1235
+mx31lite MACH_MX31LITE MX31LITE 1236
+t700wx MACH_T700WX T700WX 1237
+vf100 MACH_VF100 VF100 1238
+nsb2 MACH_NSB2 NSB2 1239
+nxhmi_bb MACH_NXHMI_BB NXHMI_BB 1240
+nxhmi_re MACH_NXHMI_RE NXHMI_RE 1241
+n4100pro MACH_N4100PRO N4100PRO 1242
+sam9260 MACH_SAM9260 SAM9260 1243
+omap_treo600 MACH_OMAP_TREO600 OMAP_TREO600 1244
+indy2410 MACH_INDY2410 INDY2410 1245
+nelt_a MACH_NELT_A NELT_A 1246
+n311 MACH_N311 N311 1248
+at91sam9260vgk MACH_AT91SAM9260VGK AT91SAM9260VGK 1249
+at91leppe MACH_AT91LEPPE AT91LEPPE 1250
+at91lepccn MACH_AT91LEPCCN AT91LEPCCN 1251
+apc7100 MACH_APC7100 APC7100 1252
+stargazer MACH_STARGAZER STARGAZER 1253
+sonata MACH_SONATA SONATA 1254
+schmoogie MACH_SCHMOOGIE SCHMOOGIE 1255
+aztool MACH_AZTOOL AZTOOL 1256
+mioa701 MACH_MIOA701 MIOA701 1257
+sxni9260 MACH_SXNI9260 SXNI9260 1258
+mxc27520evb MACH_MXC27520EVB MXC27520EVB 1259
+armadillo5x0 MACH_ARMADILLO5X0 ARMADILLO5X0 1260
+mb9260 MACH_MB9260 MB9260 1261
+mb9263 MACH_MB9263 MB9263 1262
+ipac9302 MACH_IPAC9302 IPAC9302 1263
+cc9p9360js MACH_CC9P9360JS CC9P9360JS 1264
+gallium MACH_GALLIUM GALLIUM 1265
+msc2410 MACH_MSC2410 MSC2410 1266
+ghi270 MACH_GHI270 GHI270 1267
+davinci_leonardo MACH_DAVINCI_LEONARDO DAVINCI_LEONARDO 1268
+oiab MACH_OIAB OIAB 1269
+smdk6400 MACH_SMDK6400 SMDK6400 1270
+nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
+greenphone MACH_GREENPHONE GREENPHONE 1272
+compex42x MACH_COMPEXWP18 COMPEXWP18 1273
+xmate MACH_XMATE XMATE 1274
+energizer MACH_ENERGIZER ENERGIZER 1275
+ime1 MACH_IME1 IME1 1276
+sweda_tms MACH_SWEDATMS SWEDATMS 1277
+ntnp435c MACH_NTNP435C NTNP435C 1278
+spectro2 MACH_SPECTRO2 SPECTRO2 1279
+h6039 MACH_H6039 H6039 1280
+ep80219 MACH_EP80219 EP80219 1281
+samoa_ii MACH_SAMOA_II SAMOA_II 1282
+cwmxl MACH_CWMXL CWMXL 1283
+as9200 MACH_AS9200 AS9200 1284
+sfx1149 MACH_SFX1149 SFX1149 1285
+navi010 MACH_NAVI010 NAVI010 1286
+multmdp MACH_MULTMDP MULTMDP 1287
+scb9520 MACH_SCB9520 SCB9520 1288
+htcathena MACH_HTCATHENA HTCATHENA 1289
+xp179 MACH_XP179 XP179 1290
+h4300 MACH_H4300 H4300 1291
+goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292
+mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293
+adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294
+adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295
+mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296
+em_x270 MACH_EM_X270 EM_X270 1297
+tpp302 MACH_TPP302 TPP302 1298
+tpp104 MACH_TPM104 TPM104 1299
+tpm102 MACH_TPM102 TPM102 1300
+tpm109 MACH_TPM109 TPM109 1301
+fbxo1 MACH_FBXO1 FBXO1 1302
+hxd8 MACH_HXD8 HXD8 1303
+neo1973_gta02 MACH_NEO1973_GTA02 NEO1973_GTA02 1304
+emtest MACH_EMTEST EMTEST 1305
+ad6900 MACH_AD6900 AD6900 1306
+europa MACH_EUROPA EUROPA 1307
+metroconnect MACH_METROCONNECT METROCONNECT 1308
+ez_s2410 MACH_EZ_S2410 EZ_S2410 1309
+ez_s2440 MACH_EZ_S2440 EZ_S2440 1310
+ez_ep9312 MACH_EZ_EP9312 EZ_EP9312 1311
+ez_ep9315 MACH_EZ_EP9315 EZ_EP9315 1312
+ez_x7 MACH_EZ_X7 EZ_X7 1313
+godotdb MACH_GODOTDB GODOTDB 1314
+mistral MACH_MISTRAL MISTRAL 1315
+msm MACH_MSM MSM 1316
+ct5910 MACH_CT5910 CT5910 1317
+ct5912 MACH_CT5912 CT5912 1318
+hynet_ine MACH_HYNET_INE HYNET_INE 1319
+hynet_app MACH_HYNET_APP HYNET_APP 1320
+msm7200 MACH_MSM7200 MSM7200 1321
+msm7600 MACH_MSM7600 MSM7600 1322
+ceb255 MACH_CEB255 CEB255 1323
+ciel MACH_CIEL CIEL 1324
+slm5650 MACH_SLM5650 SLM5650 1325
+at91sam9rlek MACH_AT91SAM9RLEK AT91SAM9RLEK 1326
+comtech_router MACH_COMTECH_ROUTER COMTECH_ROUTER 1327
+sbc2410x MACH_SBC2410X SBC2410X 1328
+at4x0bd MACH_AT4X0BD AT4X0BD 1329
if ((err = pcibios_enable_resources(dev, mask)) < 0)
return err;
- return pcibios_enable_irq(dev);
+ if (!dev->msi_enabled)
+ pcibios_enable_irq(dev);
+ return 0;
}
int pcibios_assign_resources(void)
if ((err = pcibios_enable_resources(dev, mask)) < 0)
return err;
- pcibios_enable_irq(dev);
+ if (!dev->msi_enabled)
+ pcibios_enable_irq(dev);
return 0;
}
jmp _m_s
check_vesa:
+#ifdef CONFIG_FIRMWARE_EDID
+ leaw modelist+1024, %di
+ movw $0x4f00, %ax
+ int $0x10
+ cmpw $0x004f, %ax
+ jnz setbad
+
+ movw 4(%di), %ax
+ movw %ax, vbe_version
+#endif
leaw modelist+1024, %di
subb $VIDEO_FIRST_VESA>>8, %bh
movw %bx, %cx # Get mode information structure
rep
stosl
+ cmpw $0x0200, vbe_version # only do EDID on >= VBE2.0
+ jl no_edid
+
pushw %es # save ES
xorw %di, %di # Report Capability
pushw %di
svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes
graphic_mode: .byte 0 # Graphic mode with a linear frame buffer
dac_size: .byte 6 # DAC bit depth
+vbe_version: .word 0 # VBE bios version
# Status messages
keymsg: .ascii "Press <RETURN> to see video modes available, "
static int __init check_bridge(int vendor, int device)
{
#ifdef CONFIG_ACPI
+ static int warned;
/* According to Nvidia all timer overrides are bogus unless HPET
is enabled. */
if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) {
- if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
+ if (!warned && acpi_table_parse(ACPI_SIG_HPET,
+ nvidia_hpet_check)) {
+ warned = 1;
acpi_skip_timer_override = 1;
printk(KERN_INFO "Nvidia board "
"detected. Ignoring ACPI "
#include <asm/alternative.h>
#include <asm/sections.h>
-static int no_replacement = 0;
static int smp_alt_once = 0;
static int debug_alternative = 0;
-static int __init noreplacement_setup(char *s)
-{
- no_replacement = 1;
- return 1;
-}
static int __init bootonly(char *str)
{
smp_alt_once = 1;
return 1;
}
-__setup("noreplacement", noreplacement_setup);
__setup("smp-alt-boot", bootonly);
__setup("debug-alternative", debug_alt);
struct smp_alt_module *smp;
unsigned long flags;
- if (no_replacement)
- return;
-
if (smp_alt_once) {
if (boot_cpu_has(X86_FEATURE_UP))
alternatives_smp_unlock(locks, locks_end,
struct smp_alt_module *item;
unsigned long flags;
- if (no_replacement || smp_alt_once)
+ if (smp_alt_once)
return;
spin_lock_irqsave(&smp_alt, flags);
return;
#endif
- if (no_replacement || smp_alt_once)
+ if (smp_alt_once)
return;
BUG_ON(!smp && (num_online_cpus() > 1));
void __init alternative_instructions(void)
{
unsigned long flags;
- if (no_replacement) {
- printk(KERN_INFO "(SMP-)alternatives turned off\n");
- free_init_pages("SMP alternatives",
- (unsigned long)__smp_alt_begin,
- (unsigned long)__smp_alt_end);
- return;
- }
local_irq_save(flags);
apply_alternatives(__alt_instructions, __alt_instructions_end);
#include <linux/clockchips.h>
#include <linux/acpi_pmtmr.h>
#include <linux/module.h>
+#include <linux/dmi.h>
#include <asm/atomic.h>
#include <asm/smp.h>
/* Local APIC timer verification ok */
static int local_apic_timer_verify_ok;
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
+static int local_apic_timer_disabled;
+/* Local APIC timer works in C2 */
+int local_apic_timer_c2_ok;
+EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
/*
* Debug level, exported for io_apic.c
long delta, deltapm;
int pm_referenced = 0;
+ if (boot_cpu_has(X86_FEATURE_LAPIC_TIMER_BROKEN))
+ local_apic_timer_disabled = 1;
+
+ /*
+ * The local apic timer can be disabled via the kernel
+ * commandline or from the test above. Register the lapic
+ * timer as a dummy clock event source on SMP systems, so the
+ * broadcast mechanism is used. On UP systems simply ignore it.
+ */
+ if (local_apic_timer_disabled) {
+ /* No broadcast on UP ! */
+ if (num_possible_cpus() > 1)
+ setup_APIC_timer();
+ return;
+ }
+
apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
"calibrating APIC timer ...\n");
apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
else
local_apic_timer_verify_ok = 0;
- }
+ } else
+ local_irq_enable();
if (!local_apic_timer_verify_ok) {
printk(KERN_WARNING
}
early_param("nolapic", parse_nolapic);
+static int __init parse_disable_lapic_timer(char *arg)
+{
+ local_apic_timer_disabled = 1;
+ return 0;
+}
+early_param("nolapic_timer", parse_disable_lapic_timer);
+
+static int __init parse_lapic_timer_c2_ok(char *arg)
+{
+ local_apic_timer_c2_ok = 1;
+ return 0;
+}
+early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+
static int __init apic_set_verbosity(char *str)
{
if (strcmp("debug", str) == 0)
extern void vide(void);
__asm__(".align 4\nvide: ret");
+#define ENABLE_C1E_MASK 0x18000000
+#define CPUID_PROCESSOR_SIGNATURE 1
+#define CPUID_XFAM 0x0ff00000
+#define CPUID_XFAM_K8 0x00000000
+#define CPUID_XFAM_10H 0x00100000
+#define CPUID_XFAM_11H 0x00200000
+#define CPUID_XMOD 0x000f0000
+#define CPUID_XMOD_REV_F 0x00040000
+
+/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
+static __cpuinit int amd_apic_timer_broken(void)
+{
+ u32 lo, hi;
+ u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+ switch (eax & CPUID_XFAM) {
+ case CPUID_XFAM_K8:
+ if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
+ break;
+ case CPUID_XFAM_10H:
+ case CPUID_XFAM_11H:
+ rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
+ if (lo & ENABLE_C1E_MASK)
+ return 1;
+ break;
+ default:
+ /* err on the side of caution */
+ return 1;
+ }
+ return 0;
+}
+
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
{
u32 l, h;
if (cpuid_eax(0x80000000) >= 0x80000006)
num_cache_leaves = 3;
+
+ if (amd_apic_timer_broken())
+ set_bit(X86_FEATURE_LAPIC_TIMER_BROKEN, c->x86_capability);
}
static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
NULL, (void *)&pr);
/* Check ACPI support for C3 state */
- if (pr != NULL && longhaul_version != TYPE_LONGHAUL_V1) {
+ if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
cx = &pr->power.states[ACPI_STATE_C3];
if (cx->address > 0 && cx->latency <= 1000) {
longhaul_flags |= USE_ACPI_C3;
#include <linux/errno.h>
#include <linux/hpet.h>
#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
#include <asm/hpet.h>
#include <asm/io.h>
cnt += delta;
hpet_writel(cnt, HPET_T0_CMP);
- return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0);
+ return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
}
/*
out_nohpet:
iounmap(hpet_virt_address);
hpet_virt_address = NULL;
+ boot_hpet_disable = 1;
return 0;
}
return IRQ_HANDLED;
}
#endif
+
+
+/*
+ * Suspend/resume part
+ */
+
+#ifdef CONFIG_PM
+
+static int hpet_suspend(struct sys_device *sys_device, pm_message_t state)
+{
+ unsigned long cfg = hpet_readl(HPET_CFG);
+
+ cfg &= ~(HPET_CFG_ENABLE|HPET_CFG_LEGACY);
+ hpet_writel(cfg, HPET_CFG);
+
+ return 0;
+}
+
+static int hpet_resume(struct sys_device *sys_device)
+{
+ unsigned int id;
+
+ hpet_start_counter();
+
+ id = hpet_readl(HPET_ID);
+
+ if (id & HPET_ID_LEGSUP)
+ hpet_enable_int();
+
+ return 0;
+}
+
+static struct sysdev_class hpet_class = {
+ set_kset_name("hpet"),
+ .suspend = hpet_suspend,
+ .resume = hpet_resume,
+};
+
+static struct sys_device hpet_device = {
+ .id = 0,
+ .cls = &hpet_class,
+};
+
+
+static __init int hpet_register_sysfs(void)
+{
+ int err;
+
+ if (!is_hpet_capable())
+ return 0;
+
+ err = sysdev_class_register(&hpet_class);
+
+ if (!err) {
+ err = sysdev_register(&hpet_device);
+ if (err)
+ sysdev_class_unregister(&hpet_class);
+ }
+
+ return err;
+}
+
+device_initcall(hpet_register_sysfs);
+
+#endif
outb(LATCH >> 8 , PIT_CH0); /* MSB */
break;
- case CLOCK_EVT_MODE_ONESHOT:
+ /*
+ * Avoid unnecessary state transitions, as it confuses
+ * Geode / Cyrix based boxen.
+ */
case CLOCK_EVT_MODE_SHUTDOWN:
+ if (evt->mode == CLOCK_EVT_MODE_UNUSED)
+ break;
case CLOCK_EVT_MODE_UNUSED:
+ if (evt->mode == CLOCK_EVT_MODE_SHUTDOWN)
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
/* One shot setup */
outb_p(0x38, PIT_MODE);
udelay(10);
return 0;
}
-int __init irqbalance_disable(char *str)
+int __devinit irqbalance_disable(char *str)
{
irqbalance_disabled = 1;
return 1;
return error;
}
+static int apply_microcode_on_cpu(int cpu)
+{
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ cpumask_t old;
+ unsigned int val[2];
+ int err = 0;
+
+ if (!uci->mc)
+ return -EINVAL;
+
+ old = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+ /* Check if the microcode we have in memory matches the CPU */
+ if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+ cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001))
+ err = -EINVAL;
+
+ if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) {
+ /* get processor flags from MSR 0x17 */
+ rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+ if (uci->pf != (1 << ((val[1] >> 18) & 7)))
+ err = -EINVAL;
+ }
+
+ if (!err) {
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+ /* see notes above for revision 1.07. Apparent chip bug */
+ sync_core();
+ /* get the current revision from MSR 0x8B */
+ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+ if (uci->rev != val[1])
+ err = -EINVAL;
+ }
+
+ if (!err)
+ apply_microcode(cpu);
+ else
+ printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:"
+ " sig=0x%x, pf=0x%x, rev=0x%x\n",
+ cpu, uci->sig, uci->pf, uci->rev);
+
+ set_cpus_allowed(current, old);
+ return err;
+}
+
static void microcode_init_cpu(int cpu)
{
cpumask_t old;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
mutex_lock(µcode_mutex);
collect_cpu_info(cpu);
- if (uci->valid && system_state == SYSTEM_RUNNING)
+ if (uci->valid && system_state == SYSTEM_RUNNING &&
+ !suspend_cpu_hotplug)
cpu_request_microcode(cpu);
mutex_unlock(µcode_mutex);
set_cpus_allowed(current, old);
return 0;
pr_debug("Microcode:CPU %d added\n", cpu);
- memset(uci, 0, sizeof(*uci));
+ /* If suspend_cpu_hotplug is set, the system is resuming and we should
+ * use the data from before the suspend.
+ */
+ if (suspend_cpu_hotplug) {
+ err = apply_microcode_on_cpu(cpu);
+ if (err)
+ microcode_fini_cpu(cpu);
+ }
+ if (!uci->valid)
+ memset(uci, 0, sizeof(*uci));
err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
if (err)
return err;
- microcode_init_cpu(cpu);
+ if (!uci->valid)
+ microcode_init_cpu(cpu);
+
return 0;
}
if (!cpu_online(cpu))
return 0;
pr_debug("Microcode:CPU %d removed\n", cpu);
- microcode_fini_cpu(cpu);
+ /* If suspend_cpu_hotplug is set, the system is suspending and we should
+ * keep the microcode in memory for the resume.
+ */
+ if (!suspend_cpu_hotplug)
+ microcode_fini_cpu(cpu);
sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
return 0;
}
* different subsystems this reservation system just tries to coordinate
* things a little
*/
-static DEFINE_PER_CPU(unsigned long, perfctr_nmi_owner);
-static DEFINE_PER_CPU(unsigned long, evntsel_nmi_owner[3]);
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
* offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now)
*/
#define NMI_MAX_COUNTER_BITS 66
+#define NMI_MAX_COUNTER_LONGS BITS_TO_LONGS(NMI_MAX_COUNTER_BITS)
+
+static DEFINE_PER_CPU(unsigned long, perfctr_nmi_owner[NMI_MAX_COUNTER_LONGS]);
+static DEFINE_PER_CPU(unsigned long, evntsel_nmi_owner[NMI_MAX_COUNTER_LONGS]);
+static cpumask_t backtrace_mask = CPU_MASK_NONE;
/* nmi_active:
* >0: the lapic NMI watchdog is active, but can be disabled
* <0: the lapic NMI watchdog has not been set up, and cannot
/* checks for a bit availability (hack for oprofile) */
int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
{
+ int cpu;
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
- return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+ for_each_possible_cpu (cpu) {
+ if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)[0]))
+ return 0;
+ }
+ return 1;
}
/* checks the an msr for availability */
int avail_to_resrv_perfctr_nmi(unsigned int msr)
{
unsigned int counter;
+ int cpu;
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+ for_each_possible_cpu (cpu) {
+ if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)[0]))
+ return 0;
+ }
+ return 1;
}
-int reserve_perfctr_nmi(unsigned int msr)
+static int __reserve_perfctr_nmi(int cpu, unsigned int msr)
{
unsigned int counter;
+ if (cpu < 0)
+ cpu = smp_processor_id();
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner)))
+ if (!test_and_set_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)[0]))
return 1;
return 0;
}
-void release_perfctr_nmi(unsigned int msr)
+static void __release_perfctr_nmi(int cpu, unsigned int msr)
{
unsigned int counter;
+ if (cpu < 0)
+ cpu = smp_processor_id();
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner));
+ clear_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)[0]);
}
-int reserve_evntsel_nmi(unsigned int msr)
+int reserve_perfctr_nmi(unsigned int msr)
+{
+ int cpu, i;
+ for_each_possible_cpu (cpu) {
+ if (!__reserve_perfctr_nmi(cpu, msr)) {
+ for_each_possible_cpu (i) {
+ if (i >= cpu)
+ break;
+ __release_perfctr_nmi(i, msr);
+ }
+ return 0;
+ }
+ }
+ return 1;
+}
+
+void release_perfctr_nmi(unsigned int msr)
+{
+ int cpu;
+ for_each_possible_cpu (cpu) {
+ __release_perfctr_nmi(cpu, msr);
+ }
+}
+
+int __reserve_evntsel_nmi(int cpu, unsigned int msr)
{
unsigned int counter;
+ if (cpu < 0)
+ cpu = smp_processor_id();
counter = nmi_evntsel_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0]))
+ if (!test_and_set_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]))
return 1;
return 0;
}
-void release_evntsel_nmi(unsigned int msr)
+static void __release_evntsel_nmi(int cpu, unsigned int msr)
{
unsigned int counter;
+ if (cpu < 0)
+ cpu = smp_processor_id();
counter = nmi_evntsel_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0]);
+ clear_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]);
+}
+
+int reserve_evntsel_nmi(unsigned int msr)
+{
+ int cpu, i;
+ for_each_possible_cpu (cpu) {
+ if (!__reserve_evntsel_nmi(cpu, msr)) {
+ for_each_possible_cpu (i) {
+ if (i >= cpu)
+ break;
+ __release_evntsel_nmi(i, msr);
+ }
+ return 0;
+ }
+ }
+ return 1;
+}
+
+void release_evntsel_nmi(unsigned int msr)
+{
+ int cpu;
+ for_each_possible_cpu (cpu) {
+ __release_evntsel_nmi(cpu, msr);
+ }
}
static __cpuinit inline int nmi_known_cpu(void)
for_each_possible_cpu(cpu)
prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
local_irq_enable();
- mdelay((10*1000)/nmi_hz); // wait 10 ticks
+ mdelay((20*1000)/nmi_hz); // wait 20 ticks
for_each_possible_cpu(cpu) {
#ifdef CONFIG_SMP
perfctr_msr = MSR_K7_PERFCTR0;
evntsel_msr = MSR_K7_EVNTSEL0;
- if (!reserve_perfctr_nmi(perfctr_msr))
+ if (!__reserve_perfctr_nmi(-1, perfctr_msr))
goto fail;
- if (!reserve_evntsel_nmi(evntsel_msr))
+ if (!__reserve_evntsel_nmi(-1, evntsel_msr))
goto fail1;
wrmsrl(perfctr_msr, 0UL);
wd->check_bit = 1ULL<<63;
return 1;
fail1:
- release_perfctr_nmi(perfctr_msr);
+ __release_perfctr_nmi(-1, perfctr_msr);
fail:
return 0;
}
wrmsr(wd->evntsel_msr, 0, 0);
- release_evntsel_nmi(wd->evntsel_msr);
- release_perfctr_nmi(wd->perfctr_msr);
+ __release_evntsel_nmi(-1, wd->evntsel_msr);
+ __release_perfctr_nmi(-1, wd->perfctr_msr);
}
#define P6_EVNTSEL0_ENABLE (1 << 22)
perfctr_msr = MSR_P6_PERFCTR0;
evntsel_msr = MSR_P6_EVNTSEL0;
- if (!reserve_perfctr_nmi(perfctr_msr))
+ if (!__reserve_perfctr_nmi(-1, perfctr_msr))
goto fail;
- if (!reserve_evntsel_nmi(evntsel_msr))
+ if (!__reserve_evntsel_nmi(-1, evntsel_msr))
goto fail1;
wrmsrl(perfctr_msr, 0UL);
wd->check_bit = 1ULL<<39;
return 1;
fail1:
- release_perfctr_nmi(perfctr_msr);
+ __release_perfctr_nmi(-1, perfctr_msr);
fail:
return 0;
}
wrmsr(wd->evntsel_msr, 0, 0);
- release_evntsel_nmi(wd->evntsel_msr);
- release_perfctr_nmi(wd->perfctr_msr);
+ __release_evntsel_nmi(-1, wd->evntsel_msr);
+ __release_perfctr_nmi(-1, wd->perfctr_msr);
}
/* Note that these events don't tick when the CPU idles. This means
cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
}
- if (!reserve_perfctr_nmi(perfctr_msr))
+ if (!__reserve_perfctr_nmi(-1, perfctr_msr))
goto fail;
- if (!reserve_evntsel_nmi(evntsel_msr))
+ if (!__reserve_evntsel_nmi(-1, evntsel_msr))
goto fail1;
evntsel = P4_ESCR_EVENT_SELECT(0x3F)
wd->check_bit = 1ULL<<39;
return 1;
fail1:
- release_perfctr_nmi(perfctr_msr);
+ __release_perfctr_nmi(-1, perfctr_msr);
fail:
return 0;
}
wrmsr(wd->cccr_msr, 0, 0);
wrmsr(wd->evntsel_msr, 0, 0);
- release_evntsel_nmi(wd->evntsel_msr);
- release_perfctr_nmi(wd->perfctr_msr);
+ __release_evntsel_nmi(-1, wd->evntsel_msr);
+ __release_perfctr_nmi(-1, wd->perfctr_msr);
}
#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0;
- if (!reserve_perfctr_nmi(perfctr_msr))
+ if (!__reserve_perfctr_nmi(-1, perfctr_msr))
goto fail;
- if (!reserve_evntsel_nmi(evntsel_msr))
+ if (!__reserve_evntsel_nmi(-1, evntsel_msr))
goto fail1;
wrmsrl(perfctr_msr, 0UL);
wd->check_bit = 1ULL << (eax.split.bit_width - 1);
return 1;
fail1:
- release_perfctr_nmi(perfctr_msr);
+ __release_perfctr_nmi(-1, perfctr_msr);
fail:
return 0;
}
return;
wrmsr(wd->evntsel_msr, 0, 0);
- release_evntsel_nmi(wd->evntsel_msr);
- release_perfctr_nmi(wd->perfctr_msr);
+ __release_evntsel_nmi(-1, wd->evntsel_msr);
+ __release_perfctr_nmi(-1, wd->perfctr_msr);
}
void setup_apic_nmi_watchdog (void *unused)
#include "mach_timer.h"
+static int tsc_enabled;
+
/*
* On some systems the TSC frequency does not
* change with the cpu frequency. So we need
/*
* Fall back to jiffies if there's no TSC available:
*/
- if (tsc_unstable || unlikely(tsc_disable))
+ if (unlikely(!tsc_enabled))
/* No locking but a rare wrong value is not a big deal: */
return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
{
if (!tsc_unstable) {
tsc_unstable = 1;
+ tsc_enabled = 0;
/* Can be called before registration */
if (clocksource_tsc.mult)
clocksource_change_rating(&clocksource_tsc, 0);
if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
- }
+ } else
+ tsc_enabled = 1;
+
clocksource_register(&clocksource_tsc);
return;
void (*flush_tlb)(int);
void (*set_initial_ap_state)(int, int);
void (*halt)(void);
+ void (*set_lazy_mode)(int mode);
} vmi_ops;
/* XXX move this to alternative.h */
}
#endif
+static void vmi_set_lazy_mode(int mode)
+{
+ static DEFINE_PER_CPU(int, lazy_mode);
+
+ if (!vmi_ops.set_lazy_mode)
+ return;
+
+ /* Modes should never nest or overlap */
+ BUG_ON(__get_cpu_var(lazy_mode) && !(mode == PARAVIRT_LAZY_NONE ||
+ mode == PARAVIRT_LAZY_FLUSH));
+
+ if (mode == PARAVIRT_LAZY_FLUSH) {
+ vmi_ops.set_lazy_mode(0);
+ vmi_ops.set_lazy_mode(__get_cpu_var(lazy_mode));
+ } else {
+ vmi_ops.set_lazy_mode(mode);
+ __get_cpu_var(lazy_mode) = mode;
+ }
+}
+
static inline int __init check_vmi_rom(struct vrom_header *rom)
{
struct pci_header *pci;
do { \
reloc = call_vrom_long_func(vmi_rom, get_reloc, \
VMI_CALL_##vmicall); \
- if (rel->type != VMI_RELOCATION_NONE) { \
- BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); \
+ if (rel->type == VMI_RELOCATION_CALL_REL) \
paravirt_ops.opname = (void *)rel->eip; \
- } else if (rel->type == VMI_RELOCATION_NOP) \
+ else if (rel->type == VMI_RELOCATION_NOP) \
paravirt_ops.opname = (void *)vmi_nop; \
+ else if (rel->type != VMI_RELOCATION_NONE) \
+ printk(KERN_WARNING "VMI: Unknown relocation " \
+ "type %d for " #vmicall"\n",\
+ rel->type); \
} while (0)
/*
para_wrap(load_esp0, vmi_load_esp0, set_kernel_stack, UpdateKernelStack);
para_fill(set_iopl_mask, SetIOPLMask);
para_fill(io_delay, IODelay);
- para_fill(set_lazy_mode, SetLazyMode);
+ para_wrap(set_lazy_mode, vmi_set_lazy_mode, set_lazy_mode, SetLazyMode);
/* user and kernel flush are just handled with different flags to FlushTLB */
para_wrap(flush_tlb_user, vmi_flush_tlb_user, flush_tlb, FlushTLB);
OUTPUT_ARCH(i386)
ENTRY(phys_startup_32)
jiffies = jiffies_64;
-_proxy_pda = 0;
+_proxy_pda = 1;
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
#include <linux/blkdev.h>
#include <linux/module.h>
#include <linux/backing-dev.h>
+#include <linux/interrupt.h>
#include <asm/uaccess.h>
#include <asm/mmx.h>
#ifndef CONFIG_X86_WP_WORKS_OK
if (unlikely(boot_cpu_data.wp_works_ok == 0) &&
((unsigned long )to) < TASK_SIZE) {
+ /*
+ * When we are in an atomic section (see
+ * mm/filemap.c:file_read_actor), return the full
+ * length to take the slow path.
+ */
+ if (in_atomic())
+ return n;
+
/*
* CPU does not honor the WP bit when writing
* from supervisory mode, and due to preemption or SMP,
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+ arch_flush_lazy_mmu_mode();
return (void*) vaddr;
}
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+ arch_flush_lazy_mmu_mode();
return (void*) vaddr;
}
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
},
},
+ {
+ .callback = set_bf_sort,
+ .ident = "Dell PowerEdge R900",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
+ },
+ },
{
.callback = set_bf_sort,
.ident = "HP ProLiant BL20p G3",
if ((err = pcibios_enable_resources(dev, mask)) < 0)
return err;
- return pcibios_enable_irq(dev);
+ if (!dev->msi_enabled)
+ return pcibios_enable_irq(dev);
+ return 0;
}
void pcibios_disable_device (struct pci_dev *dev)
{
- if (pcibios_disable_irq)
+ if (!dev->msi_enabled && pcibios_disable_irq)
pcibios_disable_irq(dev);
}
bool
select PCI if (!IA64_HP_SIM)
select ACPI if (!IA64_HP_SIM)
+ select PM if (!IA64_HP_SIM)
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
{
struct msi_msg msg;
unsigned long dest_phys_id;
- unsigned int irq, vector;
+ int irq, vector;
irq = create_irq();
if (irq < 0)
set_irq_msi(irq, desc);
dest_phys_id = cpu_physical_id(first_cpu(cpu_online_map));
- vector = irq;
+ vector = irq_to_vector(irq);
msg.address_hi = 0;
msg.address_lo =
static int ia64_msi_retrigger_irq(unsigned int irq)
{
- unsigned int vector = irq;
+ unsigned int vector = irq_to_vector(irq);
ia64_resend_irq(vector);
return 1;
"features : %s\n"
"cpu number : %lu\n"
"cpu regs : %u\n"
- "cpu MHz : %lu.%06lu\n"
+ "cpu MHz : %lu.%03lu\n"
"itc MHz : %lu.%06lu\n"
"BogoMIPS : %lu.%02lu\n",
cpunum, c->vendor, c->family, c->model,
smp_callin (void)
{
int cpuid, phys_id, itc_master;
+ struct cpuinfo_ia64 *last_cpuinfo, *this_cpuinfo;
extern void ia64_init_itm(void);
extern volatile int time_keeper_id;
* Get our bogomips.
*/
ia64_init_itm();
- calibrate_delay();
+
+ /*
+ * Delay calibration can be skipped if new processor is identical to the
+ * previous processor.
+ */
+ last_cpuinfo = cpu_data(cpuid - 1);
+ this_cpuinfo = local_cpu_data;
+ if (last_cpuinfo->itc_freq != this_cpuinfo->itc_freq ||
+ last_cpuinfo->proc_freq != this_cpuinfo->proc_freq ||
+ last_cpuinfo->features != this_cpuinfo->features ||
+ last_cpuinfo->revision != this_cpuinfo->revision ||
+ last_cpuinfo->family != this_cpuinfo->family ||
+ last_cpuinfo->archrev != this_cpuinfo->archrev ||
+ last_cpuinfo->model != this_cpuinfo->model)
+ calibrate_delay();
local_cpu_data->loops_per_jiffy = loops_per_jiffy;
#ifdef CONFIG_IA32_SUPPORT
if (stack_size > MAX_USER_STACK_SIZE)
stack_size = MAX_USER_STACK_SIZE;
- current->thread.rbs_bot = STACK_TOP - stack_size;
+ current->thread.rbs_bot = PAGE_ALIGN(current->mm->start_stack - stack_size);
}
/*
if (ret < 0)
return ret;
- return acpi_pci_irq_enable(dev);
+ if (!dev->msi_enabled)
+ return acpi_pci_irq_enable(dev);
+ return 0;
}
void
pcibios_disable_device (struct pci_dev *dev)
{
BUG_ON(atomic_read(&dev->enable_cnt));
- acpi_pci_irq_disable(dev);
+ if (!dev->msi_enabled)
+ acpi_pci_irq_disable(dev);
}
void
* There are errors which still need to be cleaned up by
* hubiio_crb_error_handler
*/
- mod_timer(recovery_timer, HZ * 5);
+ mod_timer(recovery_timer, jiffies + (HZ * 5));
BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
smp_processor_id()));
return 1;
icrbd.ii_icrb0_d_regval =
REMOTE_HUB_L(nasid, IIO_ICRB_D(i));
if (icrbd.d_bteop) {
- mod_timer(recovery_timer, HZ * 5);
+ mod_timer(recovery_timer, jiffies + (HZ * 5));
BTE_PRINTK(("eh:%p:%d Valid %d, Giving up\n",
err_nodepda, smp_processor_id(),
i));
status = BTE_LNSTAT_LOAD(bte);
if ((status & IBLS_ERROR) || !(status & IBLS_BUSY))
continue;
- mod_timer(recovery_timer, HZ * 5);
+ mod_timer(recovery_timer, jiffies + (HZ * 5));
BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
smp_processor_id()));
return 1;
}
/*
- * If we're mapping for MSI, set the MSI bit in the ATE
+ * If we're mapping for MSI, set the MSI bit in the ATE. If it's a
+ * TIOCP based pci bus, we also need to set the PIO bit in the ATE.
*/
- if (dma_flags & SN_DMA_MSI)
+ if (dma_flags & SN_DMA_MSI) {
ate |= PCI32_ATE_MSI;
+ if (IS_TIOCP_SOFT(pcibus_info))
+ ate |= PCI32_ATE_PIO;
+ }
ate_write(pcibus_info, ate_index, ate_count, ate);
config MIPS_MT_SMTC_INSTANT_REPLAY
bool "Low-latency Dispatch of Deferred SMTC IPIs"
- depends on MIPS_MT_SMTC
+ depends on MIPS_MT_SMTC && !PREEMPT
default y
help
SMTC pseudo-interrupts between TCs are deferred and queued
char **arg = (char **) fw_arg1;
char **env = (char **) fw_arg2;
struct callvectors *cv = (struct callvectors *) fw_arg3;
- uint32_t tmp;
int i;
/* save the PROM vectors for debugging use */
static void __init setup_l3cache(unsigned long size);
/* setup code for a handoff from a version 1 PMON 2000 PROM */
-void PMON_v1_setup()
+static void PMON_v1_setup(void)
{
/* A wired TLB entry for the GT64120A and the serial port. The
GT64120A is going to be hit on every IRQ anyway - there's
* aligned and should be uncached to avoid cache flushing after every
* update.
*/
- vdma_pagetable_start = alloc_bootmem_low_pages(VDMA_PGTBL_SIZE);
+ vdma_pagetable_start =
+ (unsigned long) alloc_bootmem_low_pages(VDMA_PGTBL_SIZE);
if (!vdma_pagetable_start)
BUG();
dma_cache_wback_inv(vdma_pagetable_start, VDMA_PGTBL_SIZE);
SAVE_AT
SAVE_TEMP
LONG_L v0, PT_STATUS(sp)
- and v0, 1
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+ and v0, ST0_IEP
+#else
+ and v0, ST0_IE
+#endif
beqz v0, 1f
jal trace_hardirqs_on
b 2f
.align 5
NESTED(handle_int, PT_SIZE, sp)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /*
+ * Check to see if the interrupted code has just disabled
+ * interrupts and ignore this interrupt for now if so.
+ *
+ * local_irq_disable() disables interrupts and then calls
+ * trace_hardirqs_off() to track the state. If an interrupt is taken
+ * after interrupts are disabled but before the state is updated
+ * it will appear to restore_all that it is incorrectly returning with
+ * interrupts disabled
+ */
+ .set push
+ .set noat
+ mfc0 k0, CP0_STATUS
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+ and k0, ST0_IEP
+ bnez k0, 1f
+
+ mfc0 k0, EP0_EPC
+ .set noreorder
+ j k0
+ rfe
+#else
+ and k0, ST0_IE
+ bnez k0, 1f
+
+ eret
+#endif
+1:
+ .set pop
+#endif
SAVE_ALL
CLI
TRACE_IRQS_OFF
#ifndef CONFIG_CPU_HAS_LLSC
sw zero, ll_bit
#endif
- mfc0 t2, CP0_STATUS
+ mfc0 t1, CP0_STATUS
+ sw t1, THREAD_STATUS(a0)
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
lw t3, TASK_THREAD_INFO(a0)
lw t0, TI_FLAGS(t3)
li t1, _TIF_USEDFPU
- and t1, t0
- beqz t1, 1f
+ and t2, t0, t1
+ beqz t2, 1f
nor t1, zero, t1
and t0, t0, t1
li t1, ~ST0_CU1
and t0, t0, t1
sw t0, ST_OFF(t3)
- /* clear thread_struct CU1 bit */
- and t2, t1
fpu_save_single a0, t0 # clobbers t0
1:
- sw t2, THREAD_STATUS(a0)
/*
* The order of restoring the registers takes care of the race
* updating $28, $29 and kernelsp without disabling ints.
#ifndef CONFIG_CPU_HAS_LLSC
sw zero, ll_bit
#endif
- mfc0 t2, CP0_STATUS
+ mfc0 t1, CP0_STATUS
+ LONG_S t1, THREAD_STATUS(a0)
cpu_save_nonscratch a0
LONG_S ra, THREAD_REG31(a0)
PTR_L t3, TASK_THREAD_INFO(a0)
LONG_L t0, TI_FLAGS(t3)
li t1, _TIF_USEDFPU
- and t1, t0
- beqz t1, 1f
+ and t2, t0, t1
+ beqz t2, 1f
nor t1, zero, t1
and t0, t0, t1
li t1, ~ST0_CU1
and t0, t0, t1
LONG_S t0, ST_OFF(t3)
- /* clear thread_struct CU1 bit */
- and t2, t1
fpu_save_double a0 t0 t1 # c0_status passed in t0
# clobbers t1
1:
- LONG_S t2, THREAD_STATUS(a0)
/*
* The order of restoring the registers takes care of the race
/* Check and clear pending FPU exceptions in saved CSR */
extern int fpcsr_pending(unsigned int __user *fpcsr);
+/* Make sure we will not lose FPU ownership */
+#ifdef CONFIG_PREEMPT
+#define lock_fpu_owner() preempt_disable()
+#define unlock_fpu_owner() preempt_enable()
+#else
+#define lock_fpu_owner() pagefault_disable()
+#define unlock_fpu_owner() pagefault_enable()
+#endif
+
#endif /* __SIGNAL_COMMON_H */
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/compiler.h>
+#include <linux/uaccess.h>
#include <asm/abi.h>
#include <asm/asm.h>
#include <asm/cacheflush.h>
#include <asm/fpu.h>
#include <asm/sim.h>
-#include <asm/uaccess.h>
#include <asm/ucontext.h>
#include <asm/cpu-features.h>
#include <asm/war.h>
/*
* Helper routines
*/
+static int protected_save_fp_context(struct sigcontext __user *sc)
+{
+ int err;
+ while (1) {
+ lock_fpu_owner();
+ own_fpu_inatomic(1);
+ err = save_fp_context(sc); /* this might fail */
+ unlock_fpu_owner();
+ if (likely(!err))
+ break;
+ /* touch the sigcontext and try again */
+ err = __put_user(0, &sc->sc_fpregs[0]) |
+ __put_user(0, &sc->sc_fpregs[31]) |
+ __put_user(0, &sc->sc_fpc_csr);
+ if (err)
+ break; /* really bad sigcontext */
+ }
+ return err;
+}
+
+static int protected_restore_fp_context(struct sigcontext __user *sc)
+{
+ int err, tmp;
+ while (1) {
+ lock_fpu_owner();
+ own_fpu_inatomic(0);
+ err = restore_fp_context(sc); /* this might fail */
+ unlock_fpu_owner();
+ if (likely(!err))
+ break;
+ /* touch the sigcontext and try again */
+ err = __get_user(tmp, &sc->sc_fpregs[0]) |
+ __get_user(tmp, &sc->sc_fpregs[31]) |
+ __get_user(tmp, &sc->sc_fpc_csr);
+ if (err)
+ break; /* really bad sigcontext */
+ }
+ return err;
+}
+
int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
int err = 0;
* Save FPU state to signal context. Signal handler
* will "inherit" current FPU state.
*/
- own_fpu(1);
- enable_fp_in_kernel();
- err |= save_fp_context(sc);
- disable_fp_in_kernel();
+ err |= protected_save_fp_context(sc);
}
return err;
}
err = sig = fpcsr_pending(&sc->sc_fpc_csr);
if (err > 0)
err = 0;
- err |= restore_fp_context(sc);
+ err |= protected_restore_fp_context(sc);
return err ?: sig;
}
if (used_math) {
/* restore fpu context if we have used it before */
- own_fpu(0);
- enable_fp_in_kernel();
if (!err)
err = check_and_restore_fp_context(sc);
- disable_fp_in_kernel();
} else {
/* signal handler may have used FPU. Give it up. */
lose_fpu(0);
#include <linux/compat.h>
#include <linux/suspend.h>
#include <linux/compiler.h>
+#include <linux/uaccess.h>
#include <asm/abi.h>
#include <asm/asm.h>
#include <linux/bitops.h>
#include <asm/cacheflush.h>
#include <asm/sim.h>
-#include <asm/uaccess.h>
#include <asm/ucontext.h>
#include <asm/system.h>
#include <asm/fpu.h>
/*
* sigcontext handlers
*/
+static int protected_save_fp_context32(struct sigcontext32 __user *sc)
+{
+ int err;
+ while (1) {
+ lock_fpu_owner();
+ own_fpu_inatomic(1);
+ err = save_fp_context32(sc); /* this might fail */
+ unlock_fpu_owner();
+ if (likely(!err))
+ break;
+ /* touch the sigcontext and try again */
+ err = __put_user(0, &sc->sc_fpregs[0]) |
+ __put_user(0, &sc->sc_fpregs[31]) |
+ __put_user(0, &sc->sc_fpc_csr);
+ if (err)
+ break; /* really bad sigcontext */
+ }
+ return err;
+}
+
+static int protected_restore_fp_context32(struct sigcontext32 __user *sc)
+{
+ int err, tmp;
+ while (1) {
+ lock_fpu_owner();
+ own_fpu_inatomic(0);
+ err = restore_fp_context32(sc); /* this might fail */
+ unlock_fpu_owner();
+ if (likely(!err))
+ break;
+ /* touch the sigcontext and try again */
+ err = __get_user(tmp, &sc->sc_fpregs[0]) |
+ __get_user(tmp, &sc->sc_fpregs[31]) |
+ __get_user(tmp, &sc->sc_fpc_csr);
+ if (err)
+ break; /* really bad sigcontext */
+ }
+ return err;
+}
+
static int setup_sigcontext32(struct pt_regs *regs,
struct sigcontext32 __user *sc)
{
* Save FPU state to signal context. Signal handler
* will "inherit" current FPU state.
*/
- own_fpu(1);
- enable_fp_in_kernel();
- err |= save_fp_context32(sc);
- disable_fp_in_kernel();
+ err |= protected_save_fp_context32(sc);
}
return err;
}
err = sig = fpcsr_pending(&sc->sc_fpc_csr);
if (err > 0)
err = 0;
- err |= restore_fp_context32(sc);
+ err |= protected_restore_fp_context32(sc);
return err ?: sig;
}
if (used_math) {
/* restore fpu context if we have used it before */
- own_fpu(0);
- enable_fp_in_kernel();
if (!err)
err = check_and_restore_fp_context32(sc);
- disable_fp_in_kernel();
} else {
/* signal handler may have used FPU. Give it up. */
lose_fpu(0);
#include <linux/sched.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <asm/cpu.h>
#include <asm/hazards.h>
#include <asm/mmu_context.h>
#include <asm/smp.h>
+#include <asm/mips-boards/maltaint.h>
#include <asm/mipsregs.h>
#include <asm/cacheflush.h>
#include <asm/time.h>
void ipi_decode(struct smtc_ipi *);
static void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
-static void setup_cross_vpe_interrupts(void);
+static void setup_cross_vpe_interrupts(unsigned int nvpe);
void init_smtc_stats(void);
/* Global SMTC Status */
int imstuckcount[2][8];
/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */
-int vpemask[2][8] = {{0,1,1,0,0,0,0,1},{0,1,0,0,0,0,0,1}};
+int vpemask[2][8] = {
+ {0, 0, 1, 0, 0, 0, 0, 1},
+ {0, 0, 0, 0, 0, 0, 0, 1}
+};
int tcnoprog[NR_CPUS];
static atomic_t idle_hook_initialized = {0};
static int clock_hang_reported[NR_CPUS];
/* If we have multiple VPEs running, set up the cross-VPE interrupt */
- if (nvpe > 1)
- setup_cross_vpe_interrupts();
+ setup_cross_vpe_interrupts(nvpe);
/* Set up queue of free IPI "messages". */
nipi = NR_CPUS * IPIBUF_PER_CPU;
int setup_irq_smtc(unsigned int irq, struct irqaction * new,
unsigned long hwmask)
{
+ unsigned int vpe = current_cpu_data.vpe_id;
+
irq_hwmask[irq] = hwmask;
+#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
+ vpemask[vpe][irq - MIPSCPU_INT_BASE] = 1;
+#endif
return setup_irq(irq, new);
}
smtc_ipi_nq(&freeIPIq, pipi);
switch (type_copy) {
case SMTC_CLOCK_TICK:
+ irq_enter();
+ kstat_this_cpu.irqs[MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR]++;
/* Invoke Clock "Interrupt" */
ipi_timer_latch[dest_copy] = 0;
#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
clock_hang_reported[dest_copy] = 0;
#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
local_timer_interrupt(0, NULL);
+ irq_exit();
break;
case LINUX_SMP_IPI:
switch ((int)arg_copy) {
static struct irqaction irq_ipi;
-static void setup_cross_vpe_interrupts(void)
+static void setup_cross_vpe_interrupts(unsigned int nvpe)
{
+ if (nvpe < 1)
+ return;
+
if (!cpu_has_vint)
panic("SMTC Kernel requires Vectored Interupt support");
/*
* SMTC-specific hacks invoked from elsewhere in the kernel.
+ *
+ * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
+ * called with interrupts disabled. We do rely on interrupts being disabled
+ * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
+ * result in a recursive call to raw_local_irq_restore().
*/
-void smtc_ipi_replay(void)
+static void __smtc_ipi_replay(void)
{
+ unsigned int cpu = smp_processor_id();
+
/*
* To the extent that we've ever turned interrupts off,
* we may have accumulated deferred IPIs. This is subtle.
* is clear, and we'll handle it as a real pseudo-interrupt
* and not a pseudo-pseudo interrupt.
*/
- if (IPIQ[smp_processor_id()].depth > 0) {
- struct smtc_ipi *pipi;
- extern void self_ipi(struct smtc_ipi *);
+ if (IPIQ[cpu].depth > 0) {
+ while (1) {
+ struct smtc_ipi_q *q = &IPIQ[cpu];
+ struct smtc_ipi *pipi;
+ extern void self_ipi(struct smtc_ipi *);
+
+ spin_lock(&q->lock);
+ pipi = __smtc_ipi_dq(q);
+ spin_unlock(&q->lock);
+ if (!pipi)
+ break;
- while ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()]))) {
self_ipi(pipi);
- smtc_cpu_stats[smp_processor_id()].selfipis++;
+ smtc_cpu_stats[cpu].selfipis++;
}
}
}
+void smtc_ipi_replay(void)
+{
+ raw_local_irq_disable();
+ __smtc_ipi_replay();
+}
+
EXPORT_SYMBOL(smtc_ipi_replay);
void smtc_idle_loop_hook(void)
* is in use, there should never be any.
*/
#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
- smtc_ipi_replay();
+ {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __smtc_ipi_replay();
+ local_irq_restore(flags);
+ }
#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
}
unsigned int opcode, bcode;
siginfo_t info;
- if (get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+ if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
goto out_sigsegv;
/*
unsigned int opcode, tcode = 0;
siginfo_t info;
- if (get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+ if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
goto out_sigsegv;
/* Immediate versions don't provide a code. */
{
unsigned int cpid;
+ die_if_kernel("do_cpu invoked from kernel context!", regs);
+
cpid = (regs->cp0_cause >> CAUSEB_CE) & 3;
switch (cpid) {
case 0:
- die_if_kernel("do_cpu invoked from kernel context!", regs);
if (!cpu_has_llsc)
if (!simulate_llsc(regs))
return;
break;
case 1:
- if (!test_thread_flag(TIF_ALLOW_FP_IN_KERNEL))
- die_if_kernel("do_cpu invoked from kernel context!",
- regs);
if (used_math()) /* Using the FPU again. */
own_fpu(1);
else { /* First time FPU user. */
set_used_math();
}
- if (raw_cpu_has_fpu) {
- if (test_thread_flag(TIF_ALLOW_FP_IN_KERNEL)) {
- local_irq_disable();
- if (cpu_has_fpu)
- regs->cp0_status |= ST0_CU1;
- /*
- * We must return without enabling
- * interrupts to ensure keep FPU
- * ownership until resume.
- */
- return;
- }
- } else {
+ if (!raw_cpu_has_fpu) {
int sig;
sig = fpu_emulator_cop1Handler(regs,
¤t->thread.fpu, 0);
case 2:
case 3:
- die_if_kernel("do_cpu invoked from kernel context!", regs);
break;
}
{
}
-static void local_r3k_flush_data_cache_page(unsigned long addr)
+static void local_r3k_flush_data_cache_page(void *addr)
{
}
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1994 - 2003 by Ralf Baechle
+ * Copyright (C) 1994 - 2003, 07 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2007 MIPS Technologies, Inc.
*/
#include <linux/init.h>
#include <linux/kernel.h>
EXPORT_SYMBOL(__flush_dcache_page);
+void __flush_anon_page(struct page *page, unsigned long vmaddr)
+{
+ if (pages_do_alias((unsigned long)page_address(page), vmaddr)) {
+ void *kaddr;
+
+ kaddr = kmap_coherent(page, vmaddr);
+ flush_data_cache_page((unsigned long)kaddr);
+ kunmap_coherent(kaddr);
+ }
+}
+
+EXPORT_SYMBOL(__flush_anon_page);
+
void __update_cache(struct vm_area_struct *vma, unsigned long address,
pte_t pte)
{
asmlinkage void sb1_cache_error(void)
{
- uint64_t cerr_dpa;
uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res;
+ unsigned long long cerr_dpa;
#ifdef CONFIG_SIBYTE_BW_TRACE
/* Freeze the trace buffer now */
{
unsigned short way;
int valid;
- uint64_t taglo, va, tlo_tmp;
uint32_t taghi, taglolo, taglohi;
+ unsigned long long taglo, va;
+ uint64_t tlo_tmp;
uint8_t lru;
int res = 0;
{
int valid, way;
unsigned char state;
- uint64_t taglo, pa;
uint32_t taghi, taglolo, taglohi;
+ unsigned long long taglo, pa;
uint8_t ecc, lru;
int res = 0;
}
if (data) {
- uint64_t datalo;
uint32_t datalohi, datalolo, datahi;
+ unsigned long long datalo;
int offset;
char bad_ecc = 0;
#include <dma-coherence.h>
+static inline unsigned long dma_addr_to_virt(dma_addr_t dma_addr)
+{
+ unsigned long addr = plat_dma_addr_to_phys(dma_addr);
+
+ return (unsigned long)phys_to_virt(addr);
+}
+
/*
* Warning on the terminology - Linux calls an uncached area coherent;
* MIPS terminology calls memory areas with hardware maintained coherency
enum dma_data_direction direction)
{
if (cpu_is_noncoherent_r10000(dev))
- __dma_sync(plat_dma_addr_to_phys(dma_addr) + PAGE_OFFSET, size,
+ __dma_sync(dma_addr_to_virt(dma_addr), size,
direction);
plat_unmap_dma_mem(dma_addr);
if (cpu_is_noncoherent_r10000(dev)) {
unsigned long addr;
- addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle);
+ addr = dma_addr_to_virt(dma_handle);
__dma_sync(addr, size, direction);
}
}
if (!plat_device_is_coherent(dev)) {
unsigned long addr;
- addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle);
+ addr = dma_addr_to_virt(dma_handle);
__dma_sync(addr, size, direction);
}
}
if (cpu_is_noncoherent_r10000(dev)) {
unsigned long addr;
- addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle);
+ addr = dma_addr_to_virt(dma_handle);
__dma_sync(addr + offset, size, direction);
}
}
if (!plat_device_is_coherent(dev)) {
unsigned long addr;
- addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle);
+ addr = dma_addr_to_virt(dma_handle);
__dma_sync(addr + offset, size, direction);
}
}
siginfo_t info;
#if 0
- printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", smp_processor_id(),
+ printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
current->comm, current->pid, field, address, write,
field, regs->cp0_epc);
#endif
printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at "
"virtual address %0*lx, epc == %0*lx, ra == %0*lx\n",
- smp_processor_id(), field, address, field, regs->cp0_epc,
+ raw_smp_processor_id(), field, address, field, regs->cp0_epc,
field, regs->regs[31]);
die("Oops", regs);
pmd_t *pmd, *pmd_k;
pte_t *pte_k;
- pgd = (pgd_t *) pgd_current[smp_processor_id()] + offset;
+ pgd = (pgd_t *) pgd_current[raw_smp_processor_id()] + offset;
pgd_k = init_mm.pgd + offset;
if (!pgd_present(*pgd_k))
static inline void kmap_coherent_init(void) {}
#endif
-static inline void *kmap_coherent(struct page *page, unsigned long addr)
+void *kmap_coherent(struct page *page, unsigned long addr)
{
enum fixed_addresses idx;
unsigned long vaddr, flags, entrylo;
#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-static inline void kunmap_coherent(struct page *page)
+void kunmap_coherent(struct page *page)
{
#ifndef CONFIG_MIPS_MT_SMTC
unsigned int wired;
#ifdef CONFIG_FLATMEM
free_area_init(zones_size);
#else
- pfn = 0;
+ pfn = min_low_pfn;
for (i = 0; i < MAX_NR_ZONES; i++)
for (j = 0; j < zones_size[i]; j++, pfn++)
if (!page_is_ram(pfn))
for (i = 0; i < DM_NUM_CHANNELS; i++) {
const u64 base_val = CPHYSADDR(&page_descr[i]) |
V_DM_DSCR_BASE_RINGSZ(1);
- volatile void *base_reg =
- IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
+ void *base_reg = IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
__raw_writeq(base_val, base_reg);
__raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg);
#define vpe_id() smp_processor_id()
#else
#define WHAT 0
-#define vpe_id() smp_processor_id()
+#define vpe_id() 0
#endif
#define __define_perf_accessors(r, n, np) \
/*
* See if the PCI bus has been configured by the firmware.
*/
- reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+ reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
bcm1480_bus_status |= PCI_DEVICE_MODE;
} else {
#include <linux/pci.h>
+#include <asm/irq.h>
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
/*
* See if the PCI bus has been configured by the firmware.
*/
- reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+ reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
if (!(reg & M_SYS_PCI_HOST)) {
sb1250_bus_status |= PCI_DEVICE_MODE;
} else {
unsigned long flags;
unsigned int irq_dirty;
- i = first_cpu(mask);
- if (next_cpu(i, mask) <= NR_CPUS) {
+ if (cpus_weight(mask) != 1) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
return;
}
+ i = first_cpu(mask);
/* Convert logical CPU to physical CPU */
cpu = cpu_logical_map(i);
* independent of board/firmware
*/
-static volatile void *mailbox_0_set_regs[] = {
+static void *mailbox_0_set_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
};
-static volatile void *mailbox_0_clear_regs[] = {
+static void *mailbox_0_clear_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
};
-static volatile void *mailbox_0_regs[] = {
+static void *mailbox_0_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
periph_rev = 3;
pass_str = "A2";
break;
+ case K_SYS_REVISION_BCM112x_A3:
+ periph_rev = 3;
+ pass_str = "A3";
+ break;
+ case K_SYS_REVISION_BCM112x_A4:
+ periph_rev = 3;
+ pass_str = "A4";
+ break;
+ case K_SYS_REVISION_BCM112x_B0:
+ periph_rev = 3;
+ pass_str = "B0";
+ break;
default:
printk("Unknown %s rev %x\n", soc_str, soc_pass);
ret = 1;
#define LEDS_PHYS MLEDS_PHYS
#endif
-#define setled(index, c) \
- ((unsigned char *)(IOADDR(LEDS_PHYS)+0x20))[(3-(index))<<3] = (c)
void setleds(char *str)
{
+ void *reg;
int i;
+
for (i = 0; i < 4; i++) {
- if (!str[i]) {
- setled(i, ' ');
- } else {
- setled(i, str[i]);
- }
+ reg = IOADDR(LEDS_PHYS) + 0x20 + ((3 - i) << 3);
+
+ if (!str[i])
+ writeb(' ', reg);
+ else
+ writeb(str[i], reg);
}
}
-#endif
+
+#endif /* LEDS_PHYS */
#ifdef CONFIG_PPC64
struct thread_info *t = current_thread_info();
- if (t->flags & _TIF_ABI_PENDING)
- t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);
+ if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
+ clear_ti_thread_flag(t, TIF_ABI_PENDING);
+ if (test_ti_thread_flag(t, TIF_32BIT))
+ clear_ti_thread_flag(t, TIF_32BIT);
+ else
+ set_ti_thread_flag(t, TIF_32BIT);
+ }
#endif
discard_lazy_cpu_state();
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
- io_be_setbit(&intr->main_mask, 15 - l2irq);
+ io_be_setbit(&intr->main_mask, 16 - l2irq);
}
static void mpc52xx_main_unmask(unsigned int virq)
pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
- io_be_clrbit(&intr->main_mask, 15 - l2irq);
+ io_be_clrbit(&intr->main_mask, 16 - l2irq);
}
static struct irq_chip mpc52xx_main_irqchip = {
/*
* postcall is performed immediately before function return which
- * allows liberal use of volatile registers.
+ * allows liberal use of volatile registers. We branch around this
+ * in early init (eg when populating the MMU hashtable) by using an
+ * unconditional cpu feature.
*/
#define HCALL_INST_POSTCALL \
+BEGIN_FTR_SECTION; \
+ b 1f; \
+END_FTR_SECTION(0, 1); \
ld r4,STK_PARM(r3)(r1); /* validate opcode */ \
cmpldi cr7,r4,MAX_HCALL_OPCODE; \
bgt- cr7,1f; \
blr /* return r3 = status */
+/*
+ * plpar_hcall_raw can be called in real mode. kexec/kdump need some
+ * hypervisor calls to be executed in real mode. So plpar_hcall_raw
+ * does not access the per cpu hypervisor call statistics variables,
+ * since these variables may not be present in the RMO region.
+ */
+_GLOBAL(plpar_hcall_raw)
+ HMT_MEDIUM
+
+ mfcr r0
+ stw r0,8(r1)
+
+ std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+
+ mr r4,r5
+ mr r5,r6
+ mr r6,r7
+ mr r7,r8
+ mr r8,r9
+ mr r9,r10
+
+ HVSC /* invoke the hypervisor */
+
+ ld r12,STK_PARM(r4)(r1)
+ std r4, 0(r12)
+ std r5, 8(r12)
+ std r6, 16(r12)
+ std r7, 24(r12)
+
+ lwz r0,8(r1)
+ mtcrf 0xff,r0
+
+ blr /* return r3 = status */
+
_GLOBAL(plpar_hcall9)
HMT_MEDIUM
/* TODO: Use bulk call */
for (i = 0; i < hpte_count; i++)
- plpar_pte_remove(0, i, 0, &dummy1, &dummy2);
+ plpar_pte_remove_raw(0, i, 0, &dummy1, &dummy2);
}
/*
return rc;
}
+/* plpar_pte_remove_raw can be called in real mode. It calls plpar_hcall_raw */
+static inline long plpar_pte_remove_raw(unsigned long flags, unsigned long ptex,
+ unsigned long avpn, unsigned long *old_pteh_ret,
+ unsigned long *old_ptel_ret)
+{
+ long rc;
+ unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+
+ rc = plpar_hcall_raw(H_REMOVE, retbuf, flags, ptex, avpn);
+
+ *old_pteh_ret = retbuf[0];
+ *old_ptel_ret = retbuf[1];
+
+ return rc;
+}
+
static inline long plpar_pte_read(unsigned long flags, unsigned long ptex,
unsigned long *old_pteh_ret, unsigned long *old_ptel_ret)
{
if (h.token == NULL)
return;
- h.token -= dcr_n * h.stride;
+ h.token += dcr_n * h.stride;
iounmap(h.token);
h.token = NULL;
}
/* allocate 2 internal temporary buffers (512 bytes size each) for
* the SDMA */
- sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
if (IS_MURAM_ERR(sdma_buf_offset))
return -ENOMEM;
out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
- out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
- QE_SDMR_CEN_SHIFT)));
+ out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
+ (0x1 << QE_SDMR_CEN_SHIFT)));
return 0;
}
#include <asm/tlbflush.h>
#include <asm/rheap.h>
+#define immr_map(member) \
+({ \
+ u32 offset = offsetof(immap_t, member); \
+ void *addr = ioremap (IMAP_ADDR + offset, \
+ sizeof( ((immap_t*)0)->member)); \
+ addr; \
+})
+
+#define immr_map_size(member, size) \
+({ \
+ u32 offset = offsetof(immap_t, member); \
+ void *addr = ioremap (IMAP_ADDR + offset, size); \
+ addr; \
+})
+
static void m8xx_cpm_dpinit(void);
static uint host_buffer; /* One page of host buffer */
static uint host_end; /* end + 1 */
static rh_info_t cpm_dpmem_info;
#define CPM_DPMEM_ALIGNMENT 8
+static u8* dpram_vbase;
+static uint dpram_pbase;
void m8xx_cpm_dpinit(void)
{
spin_lock_init(&cpm_dpmem_lock);
+ dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
+ dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem;
+
/* Initialize the info header */
rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
sizeof(cpm_boot_dpmem_rh_block) /
return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset;
}
EXPORT_SYMBOL(cpm_dpram_addr);
+
+uint cpm_dpram_phys(u8* addr)
+{
+ return (dpram_pbase + (uint)(addr - dpram_vbase));
+}
+EXPORT_SYMBOL(cpm_dpram_phys);
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc5
+# Wed Apr 4 20:55:16 2007
#
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
#
# Processor
#
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_EMBEDDEDBOOT=y
CONFIG_PPC_STD_MMU=y
#
# Platform options
#
-# CONFIG_PPC_MULTIPLATFORM is not set
+
+#
+# Freescale Ethernet driver platform-specific options
+#
+# CONFIG_PPC_PREP is not set
# CONFIG_APUS is not set
+# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
+# CONFIG_CPCI690 is not set
# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
+# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
+# CONFIG_RADSTONE_PPC7D is not set
# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
+# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
CONFIG_ADS8272=y
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_EV64360 is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_8272=y
CONFIG_CPM2=y
# CONFIG_PC_KEYBOARD is not set
-CONFIG_SERIAL_CONSOLE=y
# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
#
# Bus options
#
+CONFIG_ZONE_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
+CONFIG_PCI_8260=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
#
# Advanced setup
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00400000
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
#
# Generic Driver Options
#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# Macintosh device drivers
#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
+CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
#
# Ethernet (1000 Mbit)
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
#
# Input Device Drivers
#
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+CONFIG_SERIAL_CPM_SCC4=y
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
#
# IPMI
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
#
# I2C support
#
# CONFIG_I2C is not set
#
-# Misc devices
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# Graphics support
#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# Network File Systems
#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
+# CONFIG_FEC_ENET is not set
#
# CPM2 Options
#
-CONFIG_SCC_CONSOLE=y
-CONFIG_FCC1_ENET=y
-# CONFIG_FCC2_ENET is not set
-# CONFIG_FCC3_ENET is not set
#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_PROFILING is not set
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_KGDB_CONSOLE is not set
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+
+#
+# Hardware crypto devices
+#
#include <linux/ioport.h>
#include <linux/fs_enet_pd.h>
#include <linux/platform_device.h>
+#include <linux/phy.h>
#include <asm/io.h>
#include <asm/mpc8260.h>
#include "pq2ads_pd.h"
-static void init_fcc1_ioports(void);
-static void init_fcc2_ioports(void);
-static void init_scc1_uart_ioports(void);
-static void init_scc4_uart_ioports(void);
+static void init_fcc1_ioports(struct fs_platform_info*);
+static void init_fcc2_ioports(struct fs_platform_info*);
+static void init_scc1_uart_ioports(struct fs_uart_platform_info*);
+static void init_scc4_uart_ioports(struct fs_uart_platform_info*);
static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
[fsid_scc1_uart] = {
},
};
-static void init_fcc1_ioports(struct fs_platform_info*)
+static void init_fcc1_ioports(struct fs_platform_info* pdata)
{
struct io_port *io;
u32 tempval;
iounmap(immap);
}
-static void init_fcc2_ioports(struct fs_platform_info*)
+static void init_fcc2_ioports(struct fs_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
}
}
-static void init_scc1_uart_ioports(struct fs_uart_platform_info*)
+static void init_scc1_uart_ioports(struct fs_uart_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
iounmap(immap);
}
-static void init_scc4_uart_ioports(struct fs_uart_platform_info*)
+static void init_scc4_uart_ioports(struct fs_uart_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/mii.h>
+#include <linux/phy.h>
#include <asm/delay.h>
#include <asm/io.h>
extern unsigned char __res[];
-static void setup_fec1_ioports(void);
-static void setup_scc1_ioports(void);
-static void setup_smc1_ioports(void);
-static void setup_smc2_ioports(void);
+static void setup_fec1_ioports(struct fs_platform_info*);
+static void setup_scc1_ioports(struct fs_platform_info*);
+static void setup_smc1_ioports(struct fs_uart_platform_info*);
+static void setup_smc2_ioports(struct fs_uart_platform_info*);
static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
iounmap(bcsr_io);
}
-static void setup_fec1_ioports(struct fs_platform_info*)
+static void setup_fec1_ioports(struct fs_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
}
-static void setup_scc1_ioports(struct fs_platform_info*)
+static void setup_scc1_ioports(struct fs_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
}
-static void setup_smc1_ioports(struct fs_uart_platform_info*)
+static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
}
-static void setup_smc2_ioports(struct fs_uart_platform_info*)
+static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
#include <asm/ppc_sys.h>
extern unsigned char __res[];
-static void setup_smc1_ioports(void);
-static void setup_smc2_ioports(void);
+static void setup_smc1_ioports(struct fs_uart_platform_info*);
+static void setup_smc2_ioports(struct fs_uart_platform_info*);
static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
-static void setup_fec1_ioports(void);
-static void setup_fec2_ioports(void);
-static void setup_scc3_ioports(void);
+static void setup_fec1_ioports(struct fs_platform_info*);
+static void setup_fec2_ioports(struct fs_platform_info*);
+static void setup_scc3_ioports(struct fs_platform_info*);
static struct fs_uart_platform_info mpc885_uart_pdata[] = {
[fsid_smc1_uart] = {
#endif
}
-static void setup_fec1_ioports(struct fs_platform_info*)
+static void setup_fec1_ioports(struct fs_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
}
-static void setup_fec2_ioports(struct fs_platform_info*)
+static void setup_fec2_ioports(struct fs_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
}
-static void setup_scc3_ioports(struct fs_platform_info*)
+static void setup_scc3_ioports(struct fs_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}
-static void setup_smc1_ioports(struct fs_uart_platform_info*)
+static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
}
-static void setup_smc2_ioports(struct fs_uart_platform_info*)
+static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
* shall not cross any page boundaries (vmalloc area!) when writing
* the new instruction.
*/
- addr = (u32 *)ALIGN((unsigned long)args->ptr, 4);
+ addr = (u32 *)((unsigned long)args->ptr & -4UL);
if ((unsigned long)args->ptr & 2)
instr = ((*addr) & 0xffff0000) | args->new;
else
DECLARE_EXPORT(__movmem_i4_even);
DECLARE_EXPORT(__movmem_i4_odd);
DECLARE_EXPORT(__movmemSI12_i4);
-DECLARE_EXPORT(__sdivsi3_i4i);
-DECLARE_EXPORT(__udiv_qrnnd_16);
-DECLARE_EXPORT(__udivsi3_i4i);
#else /* GCC 3.x */
DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd);
/*
* Normally called from {do_}pci_scan_bus...
*/
-void __init pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_dev *dev;
int i, has_io, has_mem;
/*
* Other archs parse arguments here.
*/
-char * __init pcibios_setup(char *str)
+char * __devinit pcibios_setup(char *str)
{
return str;
}
ret = ARG_MAX;
break;
case _SC_CHILD_MAX:
- ret = -1; /* no limit */
+ ret = current->signal->rlim[RLIMIT_NPROC].rlim_cur;
break;
case _SC_CLK_TCK:
ret = HZ;
ret = NGROUPS_MAX;
break;
case _SC_OPEN_MAX:
- ret = OPEN_MAX;
+ ret = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
break;
case _SC_JOB_CONTROL:
ret = 1; /* yes, we do support job control */
spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
return ret;
}
+EXPORT_SYMBOL(atomic_cmpxchg);
int atomic_add_unless(atomic_t *v, int a, int u)
{
spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
return ret != u;
}
+EXPORT_SYMBOL(atomic_add_unless);
/* Atomic operations are already serializing */
void atomic_set(atomic_t *v, int i)
subsys_initcall(pcibios_init);
-void pcibios_fixup_bus(struct pci_bus *pbus)
+void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
{
struct pci_pbm_info *pbm = pbus->sysdata;
}
EXPORT_SYMBOL(pcibios_bus_to_resource);
-char * __init pcibios_setup(char *str)
+char * __devinit pcibios_setup(char *str)
{
return str;
}
#define IOPTE_IS_DUMMY(iommu, iopte) \
((iopte_val(*iopte) & IOPTE_PAGE) == (iommu)->dummy_page_pa)
-static void inline iopte_make_dummy(struct pci_iommu *iommu, iopte_t *iopte)
+static inline void iopte_make_dummy(struct pci_iommu *iommu, iopte_t *iopte)
{
unsigned long val = iopte_val(*iopte);
#include "iommu_common.h"
-/* These should be allocated on an SMP_CACHE_BYTES
- * aligned boundary for optimal performance.
- *
- * On SYSIO, using an 8K page size we have 1GB of SBUS
- * DMA space mapped. We divide this space into equally
- * sized clusters. We allocate a DMA mapping from the
- * cluster that matches the order of the allocation, or
- * if the order is greater than the number of clusters,
- * we try to allocate from the last cluster.
- */
-
-#define NCLUSTERS 8UL
-#define ONE_GIG (1UL * 1024UL * 1024UL * 1024UL)
-#define CLUSTER_SIZE (ONE_GIG / NCLUSTERS)
-#define CLUSTER_MASK (CLUSTER_SIZE - 1)
-#define CLUSTER_NPAGES (CLUSTER_SIZE >> IO_PAGE_SHIFT)
#define MAP_BASE ((u32)0xc0000000)
+struct sbus_iommu_arena {
+ unsigned long *map;
+ unsigned int hint;
+ unsigned int limit;
+};
+
struct sbus_iommu {
-/*0x00*/spinlock_t lock;
+ spinlock_t lock;
-/*0x08*/iopte_t *page_table;
-/*0x10*/unsigned long strbuf_regs;
-/*0x18*/unsigned long iommu_regs;
-/*0x20*/unsigned long sbus_control_reg;
+ struct sbus_iommu_arena arena;
-/*0x28*/volatile unsigned long strbuf_flushflag;
+ iopte_t *page_table;
+ unsigned long strbuf_regs;
+ unsigned long iommu_regs;
+ unsigned long sbus_control_reg;
- /* If NCLUSTERS is ever decresed to 4 or lower,
- * you must increase the size of the type of
- * these counters. You have been duly warned. -DaveM
- */
-/*0x30*/struct {
- u16 next;
- u16 flush;
- } alloc_info[NCLUSTERS];
-
- /* The lowest used consistent mapping entry. Since
- * we allocate consistent maps out of cluster 0 this
- * is relative to the beginning of closter 0.
- */
-/*0x50*/u32 lowest_consistent_map;
+ volatile unsigned long strbuf_flushflag;
};
/* Offsets from iommu_regs */
tag += 8UL;
}
upa_readq(iommu->sbus_control_reg);
-
- for (entry = 0; entry < NCLUSTERS; entry++) {
- iommu->alloc_info[entry].flush =
- iommu->alloc_info[entry].next;
- }
-}
-
-static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages)
-{
- while (npages--)
- upa_writeq(base + (npages << IO_PAGE_SHIFT),
- iommu->iommu_regs + IOMMU_FLUSH);
- upa_readq(iommu->sbus_control_reg);
}
/* Offsets from strbuf_regs */
base, npages);
}
-static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages)
+/* Based largely upon the ppc64 iommu allocator. */
+static long sbus_arena_alloc(struct sbus_iommu *iommu, unsigned long npages)
{
- iopte_t *iopte, *limit, *first, *cluster;
- unsigned long cnum, ent, nent, flush_point, found;
-
- cnum = 0;
- nent = 1;
- while ((1UL << cnum) < npages)
- cnum++;
- if(cnum >= NCLUSTERS) {
- nent = 1UL << (cnum - NCLUSTERS);
- cnum = NCLUSTERS - 1;
- }
- iopte = iommu->page_table + (cnum * CLUSTER_NPAGES);
-
- if (cnum == 0)
- limit = (iommu->page_table +
- iommu->lowest_consistent_map);
- else
- limit = (iopte + CLUSTER_NPAGES);
-
- iopte += ((ent = iommu->alloc_info[cnum].next) << cnum);
- flush_point = iommu->alloc_info[cnum].flush;
-
- first = iopte;
- cluster = NULL;
- found = 0;
- for (;;) {
- if (iopte_val(*iopte) == 0UL) {
- found++;
- if (!cluster)
- cluster = iopte;
+ struct sbus_iommu_arena *arena = &iommu->arena;
+ unsigned long n, i, start, end, limit;
+ int pass;
+
+ limit = arena->limit;
+ start = arena->hint;
+ pass = 0;
+
+again:
+ n = find_next_zero_bit(arena->map, limit, start);
+ end = n + npages;
+ if (unlikely(end >= limit)) {
+ if (likely(pass < 1)) {
+ limit = start;
+ start = 0;
+ __iommu_flushall(iommu);
+ pass++;
+ goto again;
} else {
- /* Used cluster in the way */
- cluster = NULL;
- found = 0;
+ /* Scanned the whole thing, give up. */
+ return -1;
}
+ }
- if (found == nent)
- break;
-
- iopte += (1 << cnum);
- ent++;
- if (iopte >= limit) {
- iopte = (iommu->page_table + (cnum * CLUSTER_NPAGES));
- ent = 0;
-
- /* Multiple cluster allocations must not wrap */
- cluster = NULL;
- found = 0;
+ for (i = n; i < end; i++) {
+ if (test_bit(i, arena->map)) {
+ start = i + 1;
+ goto again;
}
- if (ent == flush_point)
- __iommu_flushall(iommu);
- if (iopte == first)
- goto bad;
}
- /* ent/iopte points to the last cluster entry we're going to use,
- * so save our place for the next allocation.
- */
- if ((iopte + (1 << cnum)) >= limit)
- ent = 0;
- else
- ent = ent + 1;
- iommu->alloc_info[cnum].next = ent;
- if (ent == flush_point)
- __iommu_flushall(iommu);
-
- /* I've got your streaming cluster right here buddy boy... */
- return cluster;
-
-bad:
- printk(KERN_EMERG "sbus: alloc_streaming_cluster of npages(%ld) failed!\n",
- npages);
- return NULL;
+ for (i = n; i < end; i++)
+ __set_bit(i, arena->map);
+
+ arena->hint = end;
+
+ return n;
}
-static void free_streaming_cluster(struct sbus_iommu *iommu, u32 base, unsigned long npages)
+static void sbus_arena_free(struct sbus_iommu_arena *arena, unsigned long base, unsigned long npages)
{
- unsigned long cnum, ent, nent;
- iopte_t *iopte;
+ unsigned long i;
- cnum = 0;
- nent = 1;
- while ((1UL << cnum) < npages)
- cnum++;
- if(cnum >= NCLUSTERS) {
- nent = 1UL << (cnum - NCLUSTERS);
- cnum = NCLUSTERS - 1;
- }
- ent = (base & CLUSTER_MASK) >> (IO_PAGE_SHIFT + cnum);
- iopte = iommu->page_table + ((base - MAP_BASE) >> IO_PAGE_SHIFT);
- do {
- iopte_val(*iopte) = 0UL;
- iopte += 1 << cnum;
- } while(--nent);
-
- /* If the global flush might not have caught this entry,
- * adjust the flush point such that we will flush before
- * ever trying to reuse it.
- */
-#define between(X,Y,Z) (((Z) - (Y)) >= ((X) - (Y)))
- if (between(ent, iommu->alloc_info[cnum].next, iommu->alloc_info[cnum].flush))
- iommu->alloc_info[cnum].flush = ent;
-#undef between
+ for (i = base; i < (base + npages); i++)
+ __clear_bit(i, arena->map);
}
-/* We allocate consistent mappings from the end of cluster zero. */
-static iopte_t *alloc_consistent_cluster(struct sbus_iommu *iommu, unsigned long npages)
+static void sbus_iommu_table_init(struct sbus_iommu *iommu, unsigned int tsbsize)
{
- iopte_t *iopte;
+ unsigned long tsbbase, order, sz, num_tsb_entries;
- iopte = iommu->page_table + (1 * CLUSTER_NPAGES);
- while (iopte > iommu->page_table) {
- iopte--;
- if (!(iopte_val(*iopte) & IOPTE_VALID)) {
- unsigned long tmp = npages;
+ num_tsb_entries = tsbsize / sizeof(iopte_t);
- while (--tmp) {
- iopte--;
- if (iopte_val(*iopte) & IOPTE_VALID)
- break;
- }
- if (tmp == 0) {
- u32 entry = (iopte - iommu->page_table);
+ /* Setup initial software IOMMU state. */
+ spin_lock_init(&iommu->lock);
- if (entry < iommu->lowest_consistent_map)
- iommu->lowest_consistent_map = entry;
- return iopte;
- }
- }
+ /* Allocate and initialize the free area map. */
+ sz = num_tsb_entries / 8;
+ sz = (sz + 7UL) & ~7UL;
+ iommu->arena.map = kzalloc(sz, GFP_KERNEL);
+ if (!iommu->arena.map) {
+ prom_printf("PCI_IOMMU: Error, kmalloc(arena.map) failed.\n");
+ prom_halt();
+ }
+ iommu->arena.limit = num_tsb_entries;
+
+ /* Now allocate and setup the IOMMU page table itself. */
+ order = get_order(tsbsize);
+ tsbbase = __get_free_pages(GFP_KERNEL, order);
+ if (!tsbbase) {
+ prom_printf("IOMMU: Error, gfp(tsb) failed.\n");
+ prom_halt();
}
- return NULL;
+ iommu->page_table = (iopte_t *)tsbbase;
+ memset(iommu->page_table, 0, tsbsize);
}
-static void free_consistent_cluster(struct sbus_iommu *iommu, u32 base, unsigned long npages)
+static inline iopte_t *alloc_npages(struct sbus_iommu *iommu, unsigned long npages)
{
- iopte_t *iopte = iommu->page_table + ((base - MAP_BASE) >> IO_PAGE_SHIFT);
+ long entry;
- if ((iopte - iommu->page_table) == iommu->lowest_consistent_map) {
- iopte_t *walk = iopte + npages;
- iopte_t *limit;
+ entry = sbus_arena_alloc(iommu, npages);
+ if (unlikely(entry < 0))
+ return NULL;
- limit = iommu->page_table + CLUSTER_NPAGES;
- while (walk < limit) {
- if (iopte_val(*walk) != 0UL)
- break;
- walk++;
- }
- iommu->lowest_consistent_map =
- (walk - iommu->page_table);
- }
+ return iommu->page_table + entry;
+}
- while (npages--)
- *iopte++ = __iopte(0UL);
+static inline void free_npages(struct sbus_iommu *iommu, dma_addr_t base, unsigned long npages)
+{
+ sbus_arena_free(&iommu->arena, base >> IO_PAGE_SHIFT, npages);
}
void *sbus_alloc_consistent(struct sbus_dev *sdev, size_t size, dma_addr_t *dvma_addr)
{
- unsigned long order, first_page, flags;
struct sbus_iommu *iommu;
iopte_t *iopte;
+ unsigned long flags, order, first_page;
void *ret;
int npages;
- if (size <= 0 || sdev == NULL || dvma_addr == NULL)
- return NULL;
-
size = IO_PAGE_ALIGN(size);
order = get_order(size);
if (order >= 10)
return NULL;
+
first_page = __get_free_pages(GFP_KERNEL|__GFP_COMP, order);
if (first_page == 0UL)
return NULL;
iommu = sdev->bus->iommu;
spin_lock_irqsave(&iommu->lock, flags);
- iopte = alloc_consistent_cluster(iommu, size >> IO_PAGE_SHIFT);
- if (iopte == NULL) {
- spin_unlock_irqrestore(&iommu->lock, flags);
+ iopte = alloc_npages(iommu, size >> IO_PAGE_SHIFT);
+ spin_unlock_irqrestore(&iommu->lock, flags);
+
+ if (unlikely(iopte == NULL)) {
free_pages(first_page, order);
return NULL;
}
- /* Ok, we're committed at this point. */
- *dvma_addr = MAP_BASE + ((iopte - iommu->page_table) << IO_PAGE_SHIFT);
+ *dvma_addr = (MAP_BASE +
+ ((iopte - iommu->page_table) << IO_PAGE_SHIFT));
ret = (void *) first_page;
npages = size >> IO_PAGE_SHIFT;
+ first_page = __pa(first_page);
while (npages--) {
- *iopte++ = __iopte(IOPTE_VALID | IOPTE_CACHE | IOPTE_WRITE |
- (__pa(first_page) & IOPTE_PAGE));
+ iopte_val(*iopte) = (IOPTE_VALID | IOPTE_CACHE |
+ IOPTE_WRITE |
+ (first_page & IOPTE_PAGE));
+ iopte++;
first_page += IO_PAGE_SIZE;
}
- iommu_flush(iommu, *dvma_addr, size >> IO_PAGE_SHIFT);
- spin_unlock_irqrestore(&iommu->lock, flags);
return ret;
}
void sbus_free_consistent(struct sbus_dev *sdev, size_t size, void *cpu, dma_addr_t dvma)
{
- unsigned long order, npages;
struct sbus_iommu *iommu;
-
- if (size <= 0 || sdev == NULL || cpu == NULL)
- return;
+ iopte_t *iopte;
+ unsigned long flags, order, npages;
npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT;
iommu = sdev->bus->iommu;
+ iopte = iommu->page_table +
+ ((dvma - MAP_BASE) >> IO_PAGE_SHIFT);
+
+ spin_lock_irqsave(&iommu->lock, flags);
+
+ free_npages(iommu, dvma - MAP_BASE, npages);
- spin_lock_irq(&iommu->lock);
- free_consistent_cluster(iommu, dvma, npages);
- iommu_flush(iommu, dvma, npages);
- spin_unlock_irq(&iommu->lock);
+ spin_unlock_irqrestore(&iommu->lock, flags);
order = get_order(size);
if (order < 10)
free_pages((unsigned long)cpu, order);
}
-dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, size_t size, int dir)
+dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, size_t sz, int direction)
{
- struct sbus_iommu *iommu = sdev->bus->iommu;
- unsigned long npages, pbase, flags;
- iopte_t *iopte;
- u32 dma_base, offset;
- unsigned long iopte_bits;
+ struct sbus_iommu *iommu;
+ iopte_t *base;
+ unsigned long flags, npages, oaddr;
+ unsigned long i, base_paddr;
+ u32 bus_addr, ret;
+ unsigned long iopte_protection;
+
+ iommu = sdev->bus->iommu;
- if (dir == SBUS_DMA_NONE)
+ if (unlikely(direction == SBUS_DMA_NONE))
BUG();
- pbase = (unsigned long) ptr;
- offset = (u32) (pbase & ~IO_PAGE_MASK);
- size = (IO_PAGE_ALIGN(pbase + size) - (pbase & IO_PAGE_MASK));
- pbase = (unsigned long) __pa(pbase & IO_PAGE_MASK);
+ oaddr = (unsigned long)ptr;
+ npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK);
+ npages >>= IO_PAGE_SHIFT;
spin_lock_irqsave(&iommu->lock, flags);
- npages = size >> IO_PAGE_SHIFT;
- iopte = alloc_streaming_cluster(iommu, npages);
- if (iopte == NULL)
- goto bad;
- dma_base = MAP_BASE + ((iopte - iommu->page_table) << IO_PAGE_SHIFT);
- npages = size >> IO_PAGE_SHIFT;
- iopte_bits = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE;
- if (dir != SBUS_DMA_TODEVICE)
- iopte_bits |= IOPTE_WRITE;
- while (npages--) {
- *iopte++ = __iopte(iopte_bits | (pbase & IOPTE_PAGE));
- pbase += IO_PAGE_SIZE;
- }
- npages = size >> IO_PAGE_SHIFT;
+ base = alloc_npages(iommu, npages);
spin_unlock_irqrestore(&iommu->lock, flags);
- return (dma_base | offset);
+ if (unlikely(!base))
+ BUG();
-bad:
- spin_unlock_irqrestore(&iommu->lock, flags);
- BUG();
- return 0;
+ bus_addr = (MAP_BASE +
+ ((base - iommu->page_table) << IO_PAGE_SHIFT));
+ ret = bus_addr | (oaddr & ~IO_PAGE_MASK);
+ base_paddr = __pa(oaddr & IO_PAGE_MASK);
+
+ iopte_protection = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE;
+ if (direction != SBUS_DMA_TODEVICE)
+ iopte_protection |= IOPTE_WRITE;
+
+ for (i = 0; i < npages; i++, base++, base_paddr += IO_PAGE_SIZE)
+ iopte_val(*base) = iopte_protection | base_paddr;
+
+ return ret;
}
-void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size, int direction)
+void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t bus_addr, size_t sz, int direction)
{
struct sbus_iommu *iommu = sdev->bus->iommu;
- u32 dma_base = dma_addr & IO_PAGE_MASK;
- unsigned long flags;
+ iopte_t *base;
+ unsigned long flags, npages, i;
+
+ if (unlikely(direction == SBUS_DMA_NONE))
+ BUG();
+
+ npages = IO_PAGE_ALIGN(bus_addr + sz) - (bus_addr & IO_PAGE_MASK);
+ npages >>= IO_PAGE_SHIFT;
+ base = iommu->page_table +
+ ((bus_addr - MAP_BASE) >> IO_PAGE_SHIFT);
- size = (IO_PAGE_ALIGN(dma_addr + size) - dma_base);
+ bus_addr &= IO_PAGE_MASK;
spin_lock_irqsave(&iommu->lock, flags);
- free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT);
- sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction);
+ sbus_strbuf_flush(iommu, bus_addr, npages, direction);
+ for (i = 0; i < npages; i++)
+ iopte_val(base[i]) = 0UL;
+ free_npages(iommu, bus_addr - MAP_BASE, npages);
spin_unlock_irqrestore(&iommu->lock, flags);
}
#define SG_ENT_PHYS_ADDRESS(SG) \
(__pa(page_address((SG)->page)) + (SG)->offset)
-static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg, int nused, int nelems, unsigned long iopte_bits)
+static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg,
+ int nused, int nelems, unsigned long iopte_protection)
{
struct scatterlist *dma_sg = sg;
struct scatterlist *sg_end = sg + nelems;
for (;;) {
unsigned long tmp;
- tmp = (unsigned long) SG_ENT_PHYS_ADDRESS(sg);
+ tmp = SG_ENT_PHYS_ADDRESS(sg);
len = sg->length;
if (((tmp ^ pteval) >> IO_PAGE_SHIFT) != 0UL) {
pteval = tmp & IO_PAGE_MASK;
sg++;
}
- pteval = ((pteval & IOPTE_PAGE) | iopte_bits);
+ pteval = iopte_protection | (pteval & IOPTE_PAGE);
while (len > 0) {
*iopte++ = __iopte(pteval);
pteval += IO_PAGE_SIZE;
}
}
-int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int dir)
+int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sglist, int nelems, int direction)
{
- struct sbus_iommu *iommu = sdev->bus->iommu;
- unsigned long flags, npages;
- iopte_t *iopte;
+ struct sbus_iommu *iommu;
+ unsigned long flags, npages, iopte_protection;
+ iopte_t *base;
u32 dma_base;
struct scatterlist *sgtmp;
int used;
- unsigned long iopte_bits;
-
- if (dir == SBUS_DMA_NONE)
- BUG();
/* Fast path single entry scatterlists. */
- if (nents == 1) {
- sg->dma_address =
+ if (nelems == 1) {
+ sglist->dma_address =
sbus_map_single(sdev,
- (page_address(sg->page) + sg->offset),
- sg->length, dir);
- sg->dma_length = sg->length;
+ (page_address(sglist->page) + sglist->offset),
+ sglist->length, direction);
+ sglist->dma_length = sglist->length;
return 1;
}
- npages = prepare_sg(sg, nents);
+ iommu = sdev->bus->iommu;
+
+ if (unlikely(direction == SBUS_DMA_NONE))
+ BUG();
+
+ npages = prepare_sg(sglist, nelems);
spin_lock_irqsave(&iommu->lock, flags);
- iopte = alloc_streaming_cluster(iommu, npages);
- if (iopte == NULL)
- goto bad;
- dma_base = MAP_BASE + ((iopte - iommu->page_table) << IO_PAGE_SHIFT);
+ base = alloc_npages(iommu, npages);
+ spin_unlock_irqrestore(&iommu->lock, flags);
+
+ if (unlikely(base == NULL))
+ BUG();
+
+ dma_base = MAP_BASE +
+ ((base - iommu->page_table) << IO_PAGE_SHIFT);
/* Normalize DVMA addresses. */
- sgtmp = sg;
- used = nents;
+ used = nelems;
+ sgtmp = sglist;
while (used && sgtmp->dma_length) {
sgtmp->dma_address += dma_base;
sgtmp++;
used--;
}
- used = nents - used;
+ used = nelems - used;
- iopte_bits = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE;
- if (dir != SBUS_DMA_TODEVICE)
- iopte_bits |= IOPTE_WRITE;
+ iopte_protection = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE;
+ if (direction != SBUS_DMA_TODEVICE)
+ iopte_protection |= IOPTE_WRITE;
+
+ fill_sg(base, sglist, used, nelems, iopte_protection);
- fill_sg(iopte, sg, used, nents, iopte_bits);
#ifdef VERIFY_SG
- verify_sglist(sg, nents, iopte, npages);
+ verify_sglist(sglist, nelems, base, npages);
#endif
- spin_unlock_irqrestore(&iommu->lock, flags);
return used;
-
-bad:
- spin_unlock_irqrestore(&iommu->lock, flags);
- BUG();
- return 0;
}
-void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int direction)
+void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sglist, int nelems, int direction)
{
- unsigned long size, flags;
struct sbus_iommu *iommu;
- u32 dvma_base;
- int i;
+ iopte_t *base;
+ unsigned long flags, i, npages;
+ u32 bus_addr;
- /* Fast path single entry scatterlists. */
- if (nents == 1) {
- sbus_unmap_single(sdev, sg->dma_address, sg->dma_length, direction);
- return;
- }
+ if (unlikely(direction == SBUS_DMA_NONE))
+ BUG();
+
+ iommu = sdev->bus->iommu;
+
+ bus_addr = sglist->dma_address & IO_PAGE_MASK;
- dvma_base = sg[0].dma_address & IO_PAGE_MASK;
- for (i = 0; i < nents; i++) {
- if (sg[i].dma_length == 0)
+ for (i = 1; i < nelems; i++)
+ if (sglist[i].dma_length == 0)
break;
- }
i--;
- size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - dvma_base;
+ npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) -
+ bus_addr) >> IO_PAGE_SHIFT;
+
+ base = iommu->page_table +
+ ((bus_addr - MAP_BASE) >> IO_PAGE_SHIFT);
- iommu = sdev->bus->iommu;
spin_lock_irqsave(&iommu->lock, flags);
- free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT);
- sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction);
+ sbus_strbuf_flush(iommu, bus_addr, npages, direction);
+ for (i = 0; i < npages; i++)
+ iopte_val(base[i]) = 0UL;
+ free_npages(iommu, bus_addr - MAP_BASE, npages);
spin_unlock_irqrestore(&iommu->lock, flags);
}
-void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t size, int direction)
+void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t bus_addr, size_t sz, int direction)
{
- struct sbus_iommu *iommu = sdev->bus->iommu;
- unsigned long flags;
+ struct sbus_iommu *iommu;
+ unsigned long flags, npages;
+
+ iommu = sdev->bus->iommu;
- size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK));
+ npages = IO_PAGE_ALIGN(bus_addr + sz) - (bus_addr & IO_PAGE_MASK);
+ npages >>= IO_PAGE_SHIFT;
+ bus_addr &= IO_PAGE_MASK;
spin_lock_irqsave(&iommu->lock, flags);
- sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction);
+ sbus_strbuf_flush(iommu, bus_addr, npages, direction);
spin_unlock_irqrestore(&iommu->lock, flags);
}
{
}
-void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int direction)
+void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sglist, int nelems, int direction)
{
- struct sbus_iommu *iommu = sdev->bus->iommu;
- unsigned long flags, size;
- u32 base;
- int i;
+ struct sbus_iommu *iommu;
+ unsigned long flags, npages, i;
+ u32 bus_addr;
+
+ iommu = sdev->bus->iommu;
- base = sg[0].dma_address & IO_PAGE_MASK;
- for (i = 0; i < nents; i++) {
- if (sg[i].dma_length == 0)
+ bus_addr = sglist[0].dma_address & IO_PAGE_MASK;
+ for (i = 0; i < nelems; i++) {
+ if (!sglist[i].dma_length)
break;
}
i--;
- size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base;
+ npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length)
+ - bus_addr) >> IO_PAGE_SHIFT;
spin_lock_irqsave(&iommu->lock, flags);
- sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction);
+ sbus_strbuf_flush(iommu, bus_addr, npages, direction);
spin_unlock_irqrestore(&iommu->lock, flags);
}
struct linux_prom64_registers *pr;
struct device_node *dp;
struct sbus_iommu *iommu;
- unsigned long regs, tsb_base;
+ unsigned long regs;
u64 control;
int i;
memset(iommu, 0, sizeof(*iommu));
- /* We start with no consistent mappings. */
- iommu->lowest_consistent_map = CLUSTER_NPAGES;
-
- for (i = 0; i < NCLUSTERS; i++) {
- iommu->alloc_info[i].flush = 0;
- iommu->alloc_info[i].next = 0;
- }
-
/* Setup spinlock. */
spin_lock_init(&iommu->lock);
sbus->portid, regs);
/* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */
+ sbus_iommu_table_init(iommu, IO_TSB_SIZE);
+
control = upa_readq(iommu->iommu_regs + IOMMU_CONTROL);
control = ((7UL << 16UL) |
(0UL << 2UL) |
(1UL << 1UL) |
(1UL << 0UL));
-
- /* Using the above configuration we need 1MB iommu page
- * table (128K ioptes * 8 bytes per iopte). This is
- * page order 7 on UltraSparc.
- */
- tsb_base = __get_free_pages(GFP_ATOMIC, get_order(IO_TSB_SIZE));
- if (tsb_base == 0UL) {
- prom_printf("sbus_iommu_init: Fatal error, cannot alloc TSB table.\n");
- prom_halt();
- }
-
- iommu->page_table = (iopte_t *) tsb_base;
- memset(iommu->page_table, 0, IO_TSB_SIZE);
-
upa_writeq(control, iommu->iommu_regs + IOMMU_CONTROL);
/* Clean out any cruft in the IOMMU using
upa_readq(iommu->sbus_control_reg);
/* Give the TSB to SYSIO. */
- upa_writeq(__pa(tsb_base), iommu->iommu_regs + IOMMU_TSBBASE);
+ upa_writeq(__pa(iommu->page_table), iommu->iommu_regs + IOMMU_TSBBASE);
/* Setup streaming buffer, DE=1 SB_EN=1 */
control = (1UL << 1UL) | (1UL << 0UL);
SIGN1(sys32_mkdir, sys_mkdir, %o1)
SIGN3(sys32_futex, compat_sys_futex, %o1, %o2, %o5)
SIGN1(sys32_sysfs, compat_sys_sysfs, %o0)
-SIGN3(sys32_ipc, compat_sys_ipc, %o1, %o2, %o3)
SIGN2(sys32_sendfile, compat_sys_sendfile, %o0, %o1)
SIGN2(sys32_sendfile64, compat_sys_sendfile64, %o0, %o1)
SIGN1(sys32_prctl, sys_prctl, %o0)
ret = ARG_MAX;
break;
case _SC_CHILD_MAX:
- ret = -1; /* no limit */
+ ret = current->signal->rlim[RLIMIT_NPROC].rlim_cur;
break;
case _SC_CLK_TCK:
ret = HZ;
ret = NGROUPS_MAX;
break;
case _SC_OPEN_MAX:
- ret = OPEN_MAX;
+ ret = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
break;
case _SC_JOB_CONTROL:
ret = 1; /* yes, we do support job control */
/*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
.word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64
/*210*/ .word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, compat_sys_sysinfo
- .word sys32_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex
+ .word compat_sys_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex
/*220*/ .word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid
.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16
/*230*/ .word sys32_select, compat_sys_time, sys32_splice, compat_sys_stime, compat_sys_statfs64
{
switch (id) {
case SOLARIS_CONFIG_NGROUPS: return NGROUPS_MAX;
- case SOLARIS_CONFIG_CHILD_MAX: return -1; /* no limit */
- case SOLARIS_CONFIG_OPEN_FILES: return OPEN_MAX;
+ case SOLARIS_CONFIG_CHILD_MAX:
+ return current->signal->rlim[RLIMIT_NPROC].rlim_cur;
+ case SOLARIS_CONFIG_OPEN_FILES:
+ return current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
case SOLARIS_CONFIG_POSIX_VER: return 199309;
case SOLARIS_CONFIG_PAGESIZE: return PAGE_SIZE;
case SOLARIS_CONFIG_XOPEN_VER: return 3;
struct chan *chan;
LIST_HEAD(list);
struct list_head *ele;
+ unsigned long flags;
- spin_lock_irq(&irqs_to_free_lock);
+ spin_lock_irqsave(&irqs_to_free_lock, flags);
list_splice_init(&irqs_to_free, &list);
- INIT_LIST_HEAD(&irqs_to_free);
- spin_unlock_irq(&irqs_to_free_lock);
+ spin_unlock_irqrestore(&irqs_to_free_lock, flags);
list_for_each(ele, &list){
chan = list_entry(ele, struct chan, free_list);
static void close_one_chan(struct chan *chan, int delay_free_irq)
{
+ unsigned long flags;
+
if(!chan->opened)
return;
if(delay_free_irq){
- spin_lock_irq(&irqs_to_free_lock);
+ spin_lock_irqsave(&irqs_to_free_lock, flags);
list_add(&chan->free_list, &irqs_to_free);
- spin_unlock_irq(&irqs_to_free_lock);
+ spin_unlock_irqrestore(&irqs_to_free_lock, flags);
}
else {
if(chan->input)
err_msg = NULL;
err = (*dev->remove)(n, &err_msg);
switch(err){
+ case 0:
+ err_msg = "";
+ break;
case -ENODEV:
if(err_msg == NULL)
err_msg = "Device doesn't exist";
static DEFINE_MUTEX(ubd_lock);
-/* XXX - this made sense in 2.4 days, now it's only used as a boolean, and
- * probably it doesn't make sense even for that. */
-static int do_ubd;
-
static int ubd_open(struct inode * inode, struct file * filp);
static int ubd_release(struct inode * inode, struct file * file);
static int ubd_ioctl(struct inode * inode, struct file * file,
struct platform_device pdev;
struct request_queue *queue;
spinlock_t lock;
+ int active;
};
#define DEFAULT_COW { \
.shared = 0, \
.cow = DEFAULT_COW, \
.lock = SPIN_LOCK_UNLOCKED, \
+ .active = 0, \
}
/* Protected by ubd_lock */
struct ubd *dev;
int n;
- do_ubd = 0;
n = os_read_file(thread_fd, &req, sizeof(req));
if(n != sizeof(req)){
printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, "
rq = req.req;
dev = rq->rq_disk->private_data;
+ dev->active = 0;
ubd_finish(rq, req.error);
reactivate_fd(thread_fd, UBD_IRQ);
}
}
else {
- if(do_ubd || (req = elv_next_request(q)) == NULL)
+ struct ubd *dev = q->queuedata;
+ if(dev->active || (req = elv_next_request(q)) == NULL)
return;
err = prepare_request(req, &io_req);
if(!err){
- do_ubd = 1;
+ dev->active = 1;
n = os_write_file(thread_fd, (char *) &io_req,
sizeof(io_req));
if(n != sizeof(io_req))
#define u32 uint32_t
#endif
+#include "sysdep/ptrace.h"
+
#define MCONSOLE_MAGIC (0xcafebabe)
#define MCONSOLE_MAX_DATA (512)
#define MCONSOLE_VERSION 2
#endif
#ifdef UML_CONFIG_MODE_SKAS
struct skas_regs {
- /* x86_64 ptrace uses sizeof(user_regs_struct) as its register
- * file size, while i386 uses FRAME_SIZE. Therefore, we need
- * to use UM_FRAME_SIZE here instead of HOST_FRAME_SIZE.
- */
unsigned long regs[MAX_REG_NR];
unsigned long fp[HOST_FP_SIZE];
struct faultinfo faultinfo;
void mem_init(void)
{
- max_low_pfn = (high_physmem - uml_physmem) >> PAGE_SHIFT;
-
/* clear the zero-page */
memset((void *) empty_zero_page, 0, PAGE_SIZE);
/* this will put all low memory onto the freelists */
totalram_pages = free_all_bootmem();
+ max_low_pfn = totalram_pages;
#ifdef CONFIG_HIGHMEM
totalhigh_pages = highmem >> PAGE_SHIFT;
totalram_pages += totalhigh_pages;
static inline long do_syscall_stub(struct mm_id * mm_idp, void **addr)
{
unsigned long regs[MAX_REG_NR];
- int n;
+ int n, i;
long ret, offset;
unsigned long * data;
unsigned long * syscall;
(unsigned long) &__syscall_stub_start);
n = ptrace_setregs(pid, regs);
- if(n < 0)
+ if(n < 0){
+ printk("Registers - \n");
+ for(i = 0; i < MAX_REG_NR; i++)
+ printk("\t%d\t0x%lx\n", i, regs[i]);
panic("do_syscall_stub : PTRACE_SETREGS failed, errno = %d\n",
- n);
+ -n);
+ }
wait_stub_done(pid, 0, "do_syscall_stub");
if((n < 0) || !WIFSTOPPED(status) ||
(WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
- unsigned long regs[HOST_FRAME_SIZE];
+ unsigned long regs[MAX_REG_NR];
if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
printk("Failed to get registers from stub, "
int i;
printk("Stub registers -\n");
- for(i = 0; i < HOST_FRAME_SIZE; i++)
+ for(i = 0; i < ARRAY_SIZE(regs); i++)
printk("\t%d - %lx\n", i, regs[i]);
}
panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
int copy_context_skas0(unsigned long new_stack, int pid)
{
int err;
- unsigned long regs[HOST_FRAME_SIZE];
+ unsigned long regs[MAX_REG_NR];
unsigned long fp_regs[HOST_FP_SIZE];
unsigned long current_stack = current_stub_stack();
struct stub_data *data = (struct stub_data *) current_stack;
/* These are set once at boot time and not changed thereafter */
-static unsigned long exec_regs[HOST_FRAME_SIZE];
+static unsigned long exec_regs[MAX_REG_NR];
static unsigned long exec_fp_regs[HOST_FP_SIZE];
static unsigned long exec_fpx_regs[HOST_XFP_SIZE];
static int have_fpx_regs = 1;
{
int err;
+ memset(exec_regs, 0, sizeof(exec_regs));
err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs);
if(err)
panic("check_ptrace : PTRACE_GETREGS failed, errno = %d",
void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
- memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+ memcpy(regs, exec_regs, sizeof(exec_regs));
if(fp_regs != NULL)
memcpy(fp_regs, exec_fp_regs,
HOST_FP_SIZE * sizeof(unsigned long));
/* These are set once at boot time and not changed thereafter */
-static unsigned long exec_regs[HOST_FRAME_SIZE];
+static unsigned long exec_regs[MAX_REG_NR];
static unsigned long exec_fp_regs[HOST_FP_SIZE];
void init_thread_registers(union uml_pt_regs *to)
void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
- memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+ memcpy(regs, exec_regs, sizeof(exec_regs));
if(fp_regs != NULL)
memcpy(fp_regs, exec_fp_regs,
HOST_FP_SIZE * sizeof(unsigned long));
}
EXPORT_SYMBOL(__udelay);
-
-void __const_udelay(unsigned long usecs)
-{
- int i, n;
-
- n = (loops_per_jiffy * HZ * usecs) / MILLION;
- for(i=0;i<n;i++)
- cpu_relax();
-}
-
-EXPORT_SYMBOL(__const_udelay);
static void ldt_get_host_info(void)
{
long ret;
- struct ldt_entry * ldt, *tmp;
+ struct ldt_entry * ldt;
+ short *tmp;
int i, size, k, order;
spin_lock(&host_ldt_lock);
}
EXPORT_SYMBOL(__udelay);
-
-void __const_udelay(unsigned long usecs)
-{
- unsigned long i, n;
-
- n = (loops_per_jiffy * HZ * usecs) / MILLION;
- for(i=0;i<n;i++)
- cpu_relax();
-}
-
-EXPORT_SYMBOL(__const_udelay);
jmp _m_s
check_vesa:
+#ifdef CONFIG_FIRMWARE_EDID
+ leaw modelist+1024, %di
+ movw $0x4f00, %ax
+ int $0x10
+ cmpw $0x004f, %ax
+ jnz setbad
+
+ movw 4(%di), %ax
+ movw %ax, vbe_version
+#endif
leaw modelist+1024, %di
subb $VIDEO_FIRST_VESA>>8, %bh
movw %bx, %cx # Get mode information structure
rep
stosl
+ cmpw $0x0200, vbe_version # only do EDID on >= VBE2.0
+ jl no_edid
+
pushw %es # save ES
xorw %di, %di # Report Capability
pushw %di
svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes
graphic_mode: .byte 0 # Graphic mode with a linear frame buffer
dac_size: .byte 6 # DAC bit depth
+vbe_version: .word 0 # VBE bios version
# Status messages
keymsg: .ascii "Press <RETURN> to see video modes available, "
{
pgd_t *slot0 = pgd_offset(current->mm, 0UL);
low_ptr = *slot0;
+ /* FIXME: We're playing with the current task's page tables here, which
+ * is potentially dangerous on SMP systems.
+ */
set_pgd(slot0, *pgd_offset(current->mm, PAGE_OFFSET));
- WARN_ON(num_online_cpus() != 1);
local_flush_tlb();
}
int disable_apic_timer __initdata;
+/* Local APIC timer works in C2? */
+int local_apic_timer_c2_ok;
+EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
+
static struct resource *ioapic_resources;
static struct resource lapic_resource = {
.name = "Local APIC",
void smp_send_timer_broadcast_ipi(void)
{
+ int cpu = smp_processor_id();
cpumask_t mask;
cpus_and(mask, cpu_online_map, timer_interrupt_broadcast_ipi_mask);
+
+ if (cpu_isset(cpu, mask)) {
+ cpu_clear(cpu, mask);
+ add_pda(apic_timer_irqs, 1);
+ smp_local_timer_interrupt();
+ }
+
if (!cpus_empty(mask)) {
send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
}
}
early_param("nolapic", setup_nolapic);
+static int __init parse_lapic_timer_c2_ok(char *arg)
+{
+ local_apic_timer_c2_ok = 1;
+ return 0;
+}
+early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+
static __init int setup_noapictimer(char *str)
{
if (str[0] != ' ' && str[0] != 0)
void (*f)(void);
};
-static struct __initdata chipset early_qrk[] = {
+static struct chipset early_qrk[] __initdata = {
{ PCI_VENDOR_ID_NVIDIA, nvidia_bugs },
{ PCI_VENDOR_ID_VIA, via_bugs },
{ PCI_VENDOR_ID_ATI, ati_bugs },
*(.text.dentry_open)
*(.text.dentry_iput)
*(.text.bio_alloc)
-*(.text.alloc_skb_from_cache)
*(.text.wait_on_page_bit)
*(.text.vfs_readdir)
*(.text.vfs_lstat)
#define TICK_COUNT 100000000
#define TICK_MIN 5000
+#define MAX_TRIES 5
/*
* Some platforms take periodic SMI interrupts with 5ms duration. Make sure none
*/
static void __init read_hpet_tsc(int *hpet, int *tsc)
{
- int tsc1, tsc2, hpet1;
+ int tsc1, tsc2, hpet1, i;
- do {
+ for (i = 0; i < MAX_TRIES; i++) {
tsc1 = get_cycles_sync();
hpet1 = hpet_readl(HPET_COUNTER);
tsc2 = get_cycles_sync();
- } while (tsc2 - tsc1 > TICK_MIN);
+ if (tsc2 - tsc1 > TICK_MIN)
+ break;
+ }
*hpet = hpet1;
*tsc = tsc2;
}
/*
* ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x20-0x2f)
+ * (these are usually mapped to vectors 0x30-0x3f)
*/
/*
* outb_p - this has to work on a wide range of PC hardware.
*/
outb_p(0x11, 0x20); /* ICW1: select 8259A-1 init */
- outb_p(IRQ0_VECTOR, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
+ outb_p(IRQ0_VECTOR, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
outb_p(0x04, 0x21); /* 8259A-1 (the master) has a slave on IR2 */
if (auto_eoi)
outb_p(0x03, 0x21); /* master does Auto EOI */
outb_p(0x01, 0x21); /* master expects normal EOI */
outb_p(0x11, 0xA0); /* ICW1: select 8259A-2 init */
- outb_p(IRQ8_VECTOR, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
+ outb_p(IRQ8_VECTOR, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
outb_p(0x02, 0xA1); /* 8259A-2 is a slave on master's IR2 */
outb_p(0x01, 0xA1); /* (slave's support for AEOI in flat mode
is to be investigated) */
dev = NULL;
i = 0;
while ((dev = next_k8_northbridge(dev)) != NULL) {
- k8_northbridges[i++] = dev;
- pci_read_config_dword(dev, 0x9c, &flush_words[i]);
+ k8_northbridges[i] = dev;
+ pci_read_config_dword(dev, 0x9c, &flush_words[i++]);
}
k8_northbridges[i] = NULL;
return 0;
* different subsystems this reservation system just tries to coordinate
* things a little
*/
-static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner);
-static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[2]);
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
* offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now)
*/
#define NMI_MAX_COUNTER_BITS 66
+#define NMI_MAX_COUNTER_LONGS BITS_TO_LONGS(NMI_MAX_COUNTER_BITS)
+
+static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner[NMI_MAX_COUNTER_LONGS]);
+static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[NMI_MAX_COUNTER_LONGS]);
+
+static cpumask_t backtrace_mask = CPU_MASK_NONE;
/* nmi_active:
* >0: the lapic NMI watchdog is active, but can be disabled
/* checks for a bit availability (hack for oprofile) */
int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
{
+ int cpu;
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
- return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+ for_each_possible_cpu (cpu) {
+ if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
+ return 0;
+ }
+ return 1;
}
/* checks the an msr for availability */
int avail_to_resrv_perfctr_nmi(unsigned int msr)
{
unsigned int counter;
+ int cpu;
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+ for_each_possible_cpu (cpu) {
+ if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
+ return 0;
+ }
+ return 1;
}
-int reserve_perfctr_nmi(unsigned int msr)
+static int __reserve_perfctr_nmi(int cpu, unsigned int msr)
{
unsigned int counter;
+ if (cpu < 0)
+ cpu = smp_processor_id();
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner)))
+ if (!test_and_set_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
return 1;
return 0;
}
-void release_perfctr_nmi(unsigned int msr)
+static void __release_perfctr_nmi(int cpu, unsigned int msr)
{
unsigned int counter;
+ if (cpu < 0)
+ cpu = smp_processor_id();
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner));
+ clear_bit(counter, &per_cpu(perfctr_nmi_owner, cpu));
}
-int reserve_evntsel_nmi(unsigned int msr)
+int reserve_perfctr_nmi(unsigned int msr)
+{
+ int cpu, i;
+ for_each_possible_cpu (cpu) {
+ if (!__reserve_perfctr_nmi(cpu, msr)) {
+ for_each_possible_cpu (i) {
+ if (i >= cpu)
+ break;
+ __release_perfctr_nmi(i, msr);
+ }
+ return 0;
+ }
+ }
+ return 1;
+}
+
+void release_perfctr_nmi(unsigned int msr)
+{
+ int cpu;
+ for_each_possible_cpu (cpu)
+ __release_perfctr_nmi(cpu, msr);
+}
+
+int __reserve_evntsel_nmi(int cpu, unsigned int msr)
{
unsigned int counter;
+ if (cpu < 0)
+ cpu = smp_processor_id();
counter = nmi_evntsel_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)))
+ if (!test_and_set_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]))
return 1;
return 0;
}
-void release_evntsel_nmi(unsigned int msr)
+static void __release_evntsel_nmi(int cpu, unsigned int msr)
{
unsigned int counter;
+ if (cpu < 0)
+ cpu = smp_processor_id();
counter = nmi_evntsel_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner));
+ clear_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]);
+}
+
+int reserve_evntsel_nmi(unsigned int msr)
+{
+ int cpu, i;
+ for_each_possible_cpu (cpu) {
+ if (!__reserve_evntsel_nmi(cpu, msr)) {
+ for_each_possible_cpu (i) {
+ if (i >= cpu)
+ break;
+ __release_evntsel_nmi(i, msr);
+ }
+ return 0;
+ }
+ }
+ return 1;
+}
+
+void release_evntsel_nmi(unsigned int msr)
+{
+ int cpu;
+ for_each_possible_cpu (cpu) {
+ __release_evntsel_nmi(cpu, msr);
+ }
}
static __cpuinit inline int nmi_known_cpu(void)
for (cpu = 0; cpu < NR_CPUS; cpu++)
counts[cpu] = cpu_pda(cpu)->__nmi_count;
local_irq_enable();
- mdelay((10*1000)/nmi_hz); // wait 10 ticks
+ mdelay((20*1000)/nmi_hz); // wait 20 ticks
for_each_online_cpu(cpu) {
if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled)
perfctr_msr = MSR_K7_PERFCTR0;
evntsel_msr = MSR_K7_EVNTSEL0;
- if (!reserve_perfctr_nmi(perfctr_msr))
+ if (!__reserve_perfctr_nmi(-1, perfctr_msr))
goto fail;
- if (!reserve_evntsel_nmi(evntsel_msr))
+ if (!__reserve_evntsel_nmi(-1, evntsel_msr))
goto fail1;
/* Simulator may not support it */
wd->check_bit = 1ULL<<63;
return 1;
fail2:
- release_evntsel_nmi(evntsel_msr);
+ __release_evntsel_nmi(-1, evntsel_msr);
fail1:
- release_perfctr_nmi(perfctr_msr);
+ __release_perfctr_nmi(-1, perfctr_msr);
fail:
return 0;
}
wrmsr(wd->evntsel_msr, 0, 0);
- release_evntsel_nmi(wd->evntsel_msr);
- release_perfctr_nmi(wd->perfctr_msr);
+ __release_evntsel_nmi(-1, wd->evntsel_msr);
+ __release_perfctr_nmi(-1, wd->perfctr_msr);
}
/* Note that these events don't tick when the CPU idles. This means
cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
}
- if (!reserve_perfctr_nmi(perfctr_msr))
+ if (!__reserve_perfctr_nmi(-1, perfctr_msr))
goto fail;
- if (!reserve_evntsel_nmi(evntsel_msr))
+ if (!__reserve_evntsel_nmi(-1, evntsel_msr))
goto fail1;
evntsel = P4_ESCR_EVENT_SELECT(0x3F)
wd->check_bit = 1ULL<<39;
return 1;
fail1:
- release_perfctr_nmi(perfctr_msr);
+ __release_perfctr_nmi(-1, perfctr_msr);
fail:
return 0;
}
wrmsr(wd->cccr_msr, 0, 0);
wrmsr(wd->evntsel_msr, 0, 0);
- release_evntsel_nmi(wd->evntsel_msr);
- release_perfctr_nmi(wd->perfctr_msr);
+ __release_evntsel_nmi(-1, wd->evntsel_msr);
+ __release_perfctr_nmi(-1, wd->perfctr_msr);
}
#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0;
- if (!reserve_perfctr_nmi(perfctr_msr))
+ if (!__reserve_perfctr_nmi(-1, perfctr_msr))
goto fail;
- if (!reserve_evntsel_nmi(evntsel_msr))
+ if (!__reserve_evntsel_nmi(-1, evntsel_msr))
goto fail1;
wrmsrl(perfctr_msr, 0UL);
wd->check_bit = 1ULL << (eax.split.bit_width - 1);
return 1;
fail1:
- release_perfctr_nmi(perfctr_msr);
+ __release_perfctr_nmi(-1, perfctr_msr);
fail:
return 0;
}
wrmsr(wd->evntsel_msr, 0, 0);
- release_evntsel_nmi(wd->evntsel_msr);
- release_perfctr_nmi(wd->perfctr_msr);
+ __release_evntsel_nmi(-1, wd->evntsel_msr);
+ __release_perfctr_nmi(-1, wd->perfctr_msr);
}
void setup_apic_nmi_watchdog(void *unused)
gatt_size = (aper_size >> PAGE_SHIFT) * sizeof(u32);
gatt = (void *)__get_free_pages(GFP_KERNEL, get_order(gatt_size));
if (!gatt)
- panic("Cannot allocate GATT table");
+ panic("Cannot allocate GATT table");
+ if (change_page_attr_addr((unsigned long)gatt, gatt_size >> PAGE_SHIFT, PAGE_KERNEL_NOCACHE))
+ panic("Could not set GART PTEs to uncacheable pages");
+ global_flush_tlb();
+
memset(gatt, 0, gatt_size);
agp_gatt_table = gatt;
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
jiffies_64 = jiffies;
-_proxy_pda = 0;
+_proxy_pda = 1;
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(7); /* RWE */
void *adr = page_address(pg);
if (cpu_has_clflush)
cache_flush_page(adr);
- __flush_tlb_one(adr);
}
+ __flush_tlb_all();
}
static inline void flush_map(struct list_head *l)
if (!cfq_cfqq_on_rr(cfqq))
cfq_add_cfqq_rr(cfqd, cfqq);
+
+ /*
+ * check if this request is a better next-serve candidate
+ */
+ cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq);
+ BUG_ON(!cfqq->next_rq);
}
static inline void
* expire an async queue immediately if it has used up its slice. idle
* queue always expire after 1 dispatch round.
*/
- if ((!cfq_cfqq_sync(cfqq) &&
+ if (cfqd->busy_queues > 1 && ((!cfq_cfqq_sync(cfqq) &&
cfqd->dispatch_slice >= cfq_prio_to_maxrq(cfqd, cfqq)) ||
- cfq_class_idle(cfqq)) {
+ cfq_class_idle(cfqq))) {
cfqq->slice_end = jiffies + 1;
cfq_slice_expired(cfqd, 0, 0);
}
while ((cfqq = cfq_select_queue(cfqd)) != NULL) {
int max_dispatch;
- /*
- * Don't repeat dispatch from the previous queue.
- */
- if (prev_cfqq == cfqq)
- break;
+ if (cfqd->busy_queues > 1) {
+ /*
+ * Don't repeat dispatch from the previous queue.
+ */
+ if (prev_cfqq == cfqq)
+ break;
- /*
- * So we have dispatched before in this round, if the
- * next queue has idling enabled (must be sync), don't
- * allow it service until the previous have continued.
- */
- if (cfqd->rq_in_driver && cfq_cfqq_idle_window(cfqq))
- break;
+ /*
+ * So we have dispatched before in this round, if the
+ * next queue has idling enabled (must be sync), don't
+ * allow it service until the previous have continued.
+ */
+ if (cfqd->rq_in_driver && cfq_cfqq_idle_window(cfqq))
+ break;
+ }
cfq_clear_cfqq_must_dispatch(cfqq);
cfq_clear_cfqq_wait_request(cfqq);
atomic_set(&cfqq->ref, 0);
cfqq->cfqd = cfqd;
- cfq_mark_cfqq_idle_window(cfqq);
+ if (key != CFQ_KEY_ASYNC)
+ cfq_mark_cfqq_idle_window(cfqq);
+
cfq_mark_cfqq_prio_changed(cfqq);
cfq_mark_cfqq_queue_new(cfqq);
cfq_init_prio_data(cfqq);
if (rq_is_meta(rq))
cfqq->meta_pending++;
- /*
- * check if this request is a better next-serve candidate)) {
- */
- cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq);
- BUG_ON(!cfqq->next_rq);
-
/*
* we never wait for an async request and we don't allow preemption
* of an async request. so just return early
int elv_register(struct elevator_type *e)
{
+ char *def = "";
spin_lock_irq(&elv_list_lock);
BUG_ON(elevator_find(e->elevator_name));
list_add_tail(&e->list, &elv_list);
spin_unlock_irq(&elv_list_lock);
- printk(KERN_INFO "io scheduler %s registered", e->elevator_name);
if (!strcmp(e->elevator_name, chosen_elevator) ||
(!*chosen_elevator &&
!strcmp(e->elevator_name, CONFIG_DEFAULT_IOSCHED)))
- printk(" (default)");
- printk("\n");
+ def = " (default)";
+
+ printk(KERN_INFO "io scheduler %s registered%s\n", e->elevator_name, def);
return 0;
}
EXPORT_SYMBOL_GPL(elv_register);
/* temporary */
if (major == 0) {
for (index = ARRAY_SIZE(major_names)-1; index > 0; index--) {
- if (is_lanana_major(index))
- continue;
if (major_names[index] == NULL)
break;
}
* considered part of another segment, since that might
* change with the bounce page.
*/
- high = page_to_pfn(bv->bv_page) >= q->bounce_pfn;
+ high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
if (high || highprv)
goto new_hw_segment;
if (cluster) {
open_softirq(BLOCK_SOFTIRQ, blk_done_softirq, NULL);
register_hotcpu_notifier(&blk_cpu_notifier);
- blk_max_low_pfn = max_low_pfn;
- blk_max_pfn = max_pfn;
+ blk_max_low_pfn = max_low_pfn - 1;
+ blk_max_pfn = max_pfn - 1;
return 0;
}
static void scatterwalk_pagedone(struct scatter_walk *walk, int out,
unsigned int more)
{
- if (out)
- flush_dcache_page(scatterwalk_page(walk));
+ if (out) {
+ struct page *page;
+
+ page = walk->sg->page + ((walk->offset - 1) >> PAGE_SHIFT);
+ flush_dcache_page(page);
+ }
if (more) {
walk->offset += PAGE_SIZE - 1;
memcpy_dir(buf, vaddr, len_this_page, out);
scatterwalk_unmap(vaddr, out);
- scatterwalk_advance(walk, nbytes);
+ scatterwalk_advance(walk, len_this_page);
if (nbytes == len_this_page)
break;
depends on ACPI
default y
---help---
- Procfs interface for ACPI is made optional for back-compatible.
- As the same functions are duplicated in sysfs interface
+ The Procfs interface for ACPI is made optional for backward compatibility.
+ As the same functions are duplicated in the sysfs interface
and this proc interface will be removed some time later,
it's marked as deprecated.
( /proc/acpi/debug_layer && debug_level are deprecated by
NOTE: This driver is deprecated and will probably be removed soon,
use asus-laptop instead.
-config ACPI_IBM
- tristate "IBM ThinkPad Laptop Extras"
- depends on X86
- select BACKLIGHT_CLASS_DEVICE
- ---help---
- This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
- support for Fn-Fx key combinations, Bluetooth control, video
- output switching, ThinkLight control, UltraBay eject and more.
- For more information about this driver see <file:Documentation/ibm-acpi.txt>
- and <http://ibm-acpi.sf.net/> .
-
- If you have an IBM ThinkPad laptop, say Y or M here.
-
-config ACPI_IBM_DOCK
- bool "Legacy Docking Station Support"
- depends on ACPI_IBM
- depends on ACPI_DOCK=n
- default n
- ---help---
- Allows the ibm_acpi driver to handle docking station events.
- This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI. It will
- allow locking and removing the laptop from the docking station,
- but will not properly connect PCI devices.
-
- If you are not sure, say N here.
-
-config ACPI_IBM_BAY
- bool "Legacy Removable Bay Support"
- depends on ACPI_IBM
- default y
- ---help---
- Allows the ibm_acpi driver to handle removable bays. It will allow
- disabling the device in the bay, and also generate notifications when
- the bay lever is ejected or inserted.
-
- If you are not sure, say Y here.
-
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
#
# Makefile for the Linux ACPI interpreter
-#
+#
export ACPI_CFLAGS
processor-objs += processor_core.o processor_throttling.o \
processor_idle.o processor_thermal.o
ifdef CONFIG_CPU_FREQ
-processor-objs += processor_perflib.o
+processor-objs += processor_perflib.o
endif
obj-y += sleep/
obj-y += bus.o glue.o
obj-y += scan.o
+# Keep EC driver first. Initialization of others depend on it.
+obj-$(CONFIG_ACPI_EC) += ec.o
obj-$(CONFIG_ACPI_AC) += ac.o
obj-$(CONFIG_ACPI_BATTERY) += battery.o
obj-$(CONFIG_ACPI_BUTTON) += button.o
-obj-$(CONFIG_ACPI_EC) += ec.o
obj-$(CONFIG_ACPI_FAN) += fan.o
obj-$(CONFIG_ACPI_DOCK) += dock.o
obj-$(CONFIG_ACPI_BAY) += bay.o
obj-$(CONFIG_ACPI_DEBUG) += debug.o
obj-$(CONFIG_ACPI_NUMA) += numa.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
-obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
obj-y += cm_sbs.o
MODULE_DESCRIPTION("Hotplug Mem Driver");
MODULE_LICENSE("GPL");
-/* ACPI _STA method values */
-#define ACPI_MEMORY_STA_PRESENT (0x00000001UL)
-#define ACPI_MEMORY_STA_ENABLED (0x00000002UL)
-#define ACPI_MEMORY_STA_FUNCTIONAL (0x00000008UL)
-
/* Memory Device States */
#define MEMORY_INVALID_STATE 0
#define MEMORY_POWER_ON_STATE 1
* Check for device status. Device should be
* present/enabled/functioning.
*/
- if (!((current_status & ACPI_MEMORY_STA_PRESENT)
- && (current_status & ACPI_MEMORY_STA_ENABLED)
- && (current_status & ACPI_MEMORY_STA_FUNCTIONAL)))
+ if (!((current_status & ACPI_STA_DEVICE_PRESENT)
+ && (current_status & ACPI_STA_DEVICE_ENABLED)
+ && (current_status & ACPI_STA_DEVICE_FUNCTIONING)))
return -ENODEV;
return 0;
return -ENODEV;
/* Check for device status. Device should be disabled */
- if (current_status & ACPI_MEMORY_STA_ENABLED)
+ if (current_status & ACPI_STA_DEVICE_ENABLED)
return -EINVAL;
return 0;
else if (device->parent)
device->status = device->parent->status;
else
- STRUCT_TO_INT(device->status) = 0x0F;
+ STRUCT_TO_INT(device->status) =
+ ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
if (device->status.functional && !device->status.present) {
printk(KERN_WARNING PREFIX "Device [%s] status [%08x]: "
MODULE_DESCRIPTION("ACPI container driver");
MODULE_LICENSE("GPL");
-#define ACPI_STA_PRESENT (0x00000001)
-
static int acpi_container_add(struct acpi_device *device);
static int acpi_container_remove(struct acpi_device *device, int type);
status = acpi_get_handle(handle, "_STA", &temp);
if (ACPI_FAILURE(status))
- return 1; /* _STA not found, assmue device present */
+ return 1; /* _STA not found, assume device present */
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status))
return 0; /* Firmware error */
- return ((sta & ACPI_STA_PRESENT) == ACPI_STA_PRESENT);
+ return ((sta & ACPI_STA_DEVICE_PRESENT) == ACPI_STA_DEVICE_PRESENT);
}
/*******************************************************************/
#include <linux/notifier.h>
#include <linux/platform_device.h>
#include <linux/jiffies.h>
+#include <linux/stddef.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
}
DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock);
+/*
+ * show_dock_uid - read method for "uid" file in sysfs
+ */
+static ssize_t show_dock_uid(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned long lbuf;
+ acpi_status status = acpi_evaluate_integer(dock_station->handle, "_UID", NULL, &lbuf);
+ if(ACPI_FAILURE(status)) {
+ return 0;
+ }
+ return snprintf(buf, PAGE_SIZE, "%lx\n", lbuf);
+}
+DEVICE_ATTR(uid, S_IRUGO, show_dock_uid, NULL);
+
+
+
/**
* dock_add - add a new dock station
* @handle: the dock station handle
kfree(dock_station);
return ret;
}
+ ret = device_create_file(&dock_device.dev, &dev_attr_uid);
+ if (ret) {
+ printk("Error %d adding sysfs file\n", ret);
+ platform_device_unregister(&dock_device);
+ kfree(dock_station);
+ return ret;
+ }
/* Find dependent devices */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
/*
- * acpi_ec.c - ACPI Embedded Controller Driver ($Revision: 38 $)
+ * ec.c - ACPI Embedded Controller Driver (v2.0)
*
+ * Copyright (C) 2006, 2007 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
+ * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com>
* Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
};
/* If we find an EC via the ECDT, we need to keep a ptr to its context */
+/* External interfaces use first EC only, so remember */
static struct acpi_ec {
acpi_handle handle;
- unsigned long uid;
unsigned long gpe;
unsigned long command_addr;
unsigned long data_addr;
struct mutex lock;
atomic_t query_pending;
atomic_t event_count;
- atomic_t leaving_burst; /* 0 : No, 1 : Yes, 2: abort */
wait_queue_head_t wait;
-} *ec_ecdt;
-
-/* External interfaces use first EC only, so remember */
-static struct acpi_device *first_ec;
+} *boot_ec, *first_ec;
/* --------------------------------------------------------------------------
Transaction Management
return -ETIME;
}
-#ifdef ACPI_FUTURE_USAGE
-/*
- * Note: samsung nv5000 doesn't work with ec burst mode.
- * http://bugzilla.kernel.org/show_bug.cgi?id=4980
- */
-int acpi_ec_enter_burst_mode(struct acpi_ec *ec)
-{
- u8 tmp = 0;
- u8 status = 0;
-
- status = acpi_ec_read_status(ec);
- if (status != -EINVAL && !(status & ACPI_EC_FLAG_BURST)) {
- status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
- if (status)
- goto end;
- acpi_ec_write_cmd(ec, ACPI_EC_BURST_ENABLE);
- status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1);
- tmp = acpi_ec_read_data(ec);
- if (tmp != 0x90) { /* Burst ACK byte */
- return -EINVAL;
- }
- }
-
- atomic_set(&ec->leaving_burst, 0);
- return 0;
- end:
- ACPI_EXCEPTION((AE_INFO, status, "EC wait, burst mode"));
- return -1;
-}
-
-int acpi_ec_leave_burst_mode(struct acpi_ec *ec)
-{
- u8 status = 0;
-
- status = acpi_ec_read_status(ec);
- if (status != -EINVAL && (status & ACPI_EC_FLAG_BURST)) {
- status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
- if (status)
- goto end;
- acpi_ec_write_cmd(ec, ACPI_EC_BURST_DISABLE);
- acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
- }
- atomic_set(&ec->leaving_burst, 1);
- return 0;
- end:
- ACPI_EXCEPTION((AE_INFO, status, "EC leave burst mode"));
- return -1;
-}
-#endif /* ACPI_FUTURE_USAGE */
-
static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
const u8 * wdata, unsigned wdata_len,
u8 * rdata, unsigned rdata_len)
return status;
}
+/*
+ * Note: samsung nv5000 doesn't work with ec burst mode.
+ * http://bugzilla.kernel.org/show_bug.cgi?id=4980
+ */
+int acpi_ec_burst_enable(struct acpi_ec *ec)
+{
+ u8 d;
+ return acpi_ec_transaction(ec, ACPI_EC_BURST_ENABLE, NULL, 0, &d, 1);
+}
+
+int acpi_ec_burst_disable(struct acpi_ec *ec)
+{
+ return acpi_ec_transaction(ec, ACPI_EC_BURST_DISABLE, NULL, 0, NULL, 0);
+}
+
static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
{
int result;
/*
* Externally callable EC access functions. For now, assume 1 EC only
*/
+int ec_burst_enable(void)
+{
+ if (!first_ec)
+ return -ENODEV;
+ return acpi_ec_burst_enable(first_ec);
+}
+
+EXPORT_SYMBOL(ec_burst_enable);
+
+int ec_burst_disable(void)
+{
+ if (!first_ec)
+ return -ENODEV;
+ return acpi_ec_burst_disable(first_ec);
+}
+
+EXPORT_SYMBOL(ec_burst_disable);
+
int ec_read(u8 addr, u8 * val)
{
- struct acpi_ec *ec;
int err;
u8 temp_data;
if (!first_ec)
return -ENODEV;
- ec = acpi_driver_data(first_ec);
-
- err = acpi_ec_read(ec, addr, &temp_data);
+ err = acpi_ec_read(first_ec, addr, &temp_data);
if (!err) {
*val = temp_data;
int ec_write(u8 addr, u8 val)
{
- struct acpi_ec *ec;
int err;
if (!first_ec)
return -ENODEV;
- ec = acpi_driver_data(first_ec);
-
- err = acpi_ec_write(ec, addr, val);
+ err = acpi_ec_write(first_ec, addr, val);
return err;
}
const u8 * wdata, unsigned wdata_len,
u8 * rdata, unsigned rdata_len)
{
- struct acpi_ec *ec;
-
if (!first_ec)
return -ENODEV;
- ec = acpi_driver_data(first_ec);
-
- return acpi_ec_transaction(ec, command, wdata,
+ return acpi_ec_transaction(first_ec, command, wdata,
wdata_len, rdata, rdata_len);
}
static void acpi_ec_gpe_query(void *ec_cxt)
{
- struct acpi_ec *ec = (struct acpi_ec *)ec_cxt;
+ struct acpi_ec *ec = ec_cxt;
u8 value = 0;
char object_name[8];
{
acpi_status status = AE_OK;
u8 value;
- struct acpi_ec *ec = (struct acpi_ec *)data;
+ struct acpi_ec *ec = data;
atomic_inc(&ec->event_count);
+
if (acpi_ec_mode == EC_INTR) {
wake_up(&ec->wait);
}
void *handler_context, void *region_context)
{
int result = 0;
- struct acpi_ec *ec = NULL;
+ struct acpi_ec *ec = handler_context;
u64 temp = *value;
acpi_integer f_v = 0;
int i = 0;
return AE_BAD_PARAMETER;
}
- ec = (struct acpi_ec *)handler_context;
-
next_byte:
switch (function) {
case ACPI_READ:
static int acpi_ec_read_info(struct seq_file *seq, void *offset)
{
- struct acpi_ec *ec = (struct acpi_ec *)seq->private;
+ struct acpi_ec *ec = seq->private;
if (!ec)
goto end;
- seq_printf(seq, "gpe: 0x%02x\n", (u32) ec->gpe);
- seq_printf(seq, "ports: 0x%02x, 0x%02x\n",
- (u32) ec->command_addr, (u32) ec->data_addr);
- seq_printf(seq, "use global lock: %s\n",
+ seq_printf(seq, "gpe:\t\t\t0x%02x\n", (u32) ec->gpe);
+ seq_printf(seq, "ports:\t\t\t0x%02x, 0x%02x\n",
+ (unsigned)ec->command_addr, (unsigned)ec->data_addr);
+ seq_printf(seq, "use global lock:\t%s\n",
ec->global_lock ? "yes" : "no");
- acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
-
end:
return 0;
}
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
+static acpi_status
+ec_parse_io_ports(struct acpi_resource *resource, void *context);
+
+static acpi_status
+ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval);
+
+static struct acpi_ec *make_acpi_ec(void)
+{
+ struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+ if (!ec)
+ return NULL;
+
+ atomic_set(&ec->query_pending, 1);
+ atomic_set(&ec->event_count, 1);
+ mutex_init(&ec->lock);
+ init_waitqueue_head(&ec->wait);
+
+ return ec;
+}
static int acpi_ec_add(struct acpi_device *device)
{
- int result = 0;
acpi_status status = AE_OK;
struct acpi_ec *ec = NULL;
if (!device)
return -EINVAL;
- ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
- if (!ec)
- return -ENOMEM;
-
- ec->handle = device->handle;
- ec->uid = -1;
- mutex_init(&ec->lock);
- atomic_set(&ec->query_pending, 0);
- atomic_set(&ec->event_count, 1);
- if (acpi_ec_mode == EC_INTR) {
- atomic_set(&ec->leaving_burst, 1);
- init_waitqueue_head(&ec->wait);
- }
strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_EC_CLASS);
- acpi_driver_data(device) = ec;
-
- /* Use the global lock for all EC transactions? */
- acpi_evaluate_integer(ec->handle, "_GLK", NULL, &ec->global_lock);
-
- /* XXX we don't test uids, because on some boxes ecdt uid = 0, see:
- http://bugzilla.kernel.org/show_bug.cgi?id=6111 */
- if (ec_ecdt) {
- acpi_remove_address_space_handler(ACPI_ROOT_OBJECT,
- ACPI_ADR_SPACE_EC,
- &acpi_ec_space_handler);
- acpi_remove_gpe_handler(NULL, ec_ecdt->gpe,
- &acpi_ec_gpe_handler);
+ ec = make_acpi_ec();
+ if (!ec)
+ return -ENOMEM;
- kfree(ec_ecdt);
+ status = ec_parse_device(device->handle, 0, ec, NULL);
+ if (status != AE_CTRL_TERMINATE) {
+ kfree(ec);
+ return -EINVAL;
}
- /* Get GPE bit assignment (EC events). */
- /* TODO: Add support for _GPE returning a package */
- status = acpi_evaluate_integer(ec->handle, "_GPE", NULL, &ec->gpe);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Obtaining GPE bit assignment"));
- result = -ENODEV;
- goto end;
- }
+ /* Check if we found the boot EC */
+ if (boot_ec) {
+ if (boot_ec->gpe == ec->gpe) {
+ /* We might have incorrect info for GL at boot time */
+ mutex_lock(&boot_ec->lock);
+ boot_ec->global_lock = ec->global_lock;
+ mutex_unlock(&boot_ec->lock);
+ kfree(ec);
+ ec = boot_ec;
+ }
+ } else
+ first_ec = ec;
+ ec->handle = device->handle;
+ acpi_driver_data(device) = ec;
- result = acpi_ec_add_fs(device);
- if (result)
- goto end;
+ acpi_ec_add_fs(device);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s [%s] (gpe %d) interrupt mode.",
acpi_device_name(device), acpi_device_bid(device),
(u32) ec->gpe));
- if (!first_ec)
- first_ec = device;
-
- end:
- if (result)
- kfree(ec);
-
- return result;
+ return 0;
}
static int acpi_ec_remove(struct acpi_device *device, int type)
{
- struct acpi_ec *ec = NULL;
+ struct acpi_ec *ec;
if (!device)
return -EINVAL;
ec = acpi_driver_data(device);
-
acpi_ec_remove_fs(device);
+ acpi_driver_data(device) = NULL;
+ if (ec == first_ec)
+ first_ec = NULL;
- kfree(ec);
-
+ /* Don't touch boot EC */
+ if (boot_ec != ec)
+ kfree(ec);
return 0;
}
static acpi_status
-acpi_ec_io_ports(struct acpi_resource *resource, void *context)
+ec_parse_io_ports(struct acpi_resource *resource, void *context)
{
- struct acpi_ec *ec = (struct acpi_ec *)context;
+ struct acpi_ec *ec = context;
- if (resource->type != ACPI_RESOURCE_TYPE_IO) {
+ if (resource->type != ACPI_RESOURCE_TYPE_IO)
return AE_OK;
- }
/*
* The first address region returned is the data port, and
* the second address region returned is the status/command
* port.
*/
- if (ec->data_addr == 0) {
+ if (ec->data_addr == 0)
ec->data_addr = resource->data.io.minimum;
- } else if (ec->command_addr == 0) {
+ else if (ec->command_addr == 0)
ec->command_addr = resource->data.io.minimum;
- } else {
+ else
return AE_CTRL_TERMINATE;
- }
return AE_OK;
}
-static int acpi_ec_start(struct acpi_device *device)
+static int ec_install_handlers(struct acpi_ec *ec)
{
- acpi_status status = AE_OK;
- struct acpi_ec *ec = NULL;
-
- if (!device)
- return -EINVAL;
-
- ec = acpi_driver_data(device);
-
- if (!ec)
- return -EINVAL;
-
- /*
- * Get I/O port addresses. Convert to GAS format.
- */
- status = acpi_walk_resources(ec->handle, METHOD_NAME__CRS,
- acpi_ec_io_ports, ec);
- if (ACPI_FAILURE(status) || ec->command_addr == 0) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Error getting I/O port addresses"));
- return -ENODEV;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx",
- ec->gpe, ec->command_addr, ec->data_addr));
-
- /*
- * Install GPE handler
- */
+ acpi_status status;
status = acpi_install_gpe_handler(NULL, ec->gpe,
ACPI_GPE_EDGE_TRIGGERED,
&acpi_ec_gpe_handler, ec);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_FAILURE(status))
return -ENODEV;
- }
+
acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
return -ENODEV;
}
- return AE_OK;
+ /* EC is fully operational, allow queries */
+ atomic_set(&ec->query_pending, 0);
+
+ return 0;
+}
+
+static int acpi_ec_start(struct acpi_device *device)
+{
+ struct acpi_ec *ec;
+
+ if (!device)
+ return -EINVAL;
+
+ ec = acpi_driver_data(device);
+
+ if (!ec)
+ return -EINVAL;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx",
+ ec->gpe, ec->command_addr, ec->data_addr));
+
+ /* Boot EC is already working */
+ if (ec == boot_ec)
+ return 0;
+
+ return ec_install_handlers(ec);
}
static int acpi_ec_stop(struct acpi_device *device, int type)
{
- acpi_status status = AE_OK;
- struct acpi_ec *ec = NULL;
+ acpi_status status;
+ struct acpi_ec *ec;
if (!device)
return -EINVAL;
ec = acpi_driver_data(device);
+ if (!ec)
+ return -EINVAL;
+
+ /* Don't touch boot EC */
+ if (ec == boot_ec)
+ return 0;
status = acpi_remove_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC,
return 0;
}
-static acpi_status __init
-acpi_fake_ecdt_callback(acpi_handle handle,
- u32 Level, void *context, void **retval)
+static acpi_status
+ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
{
acpi_status status;
- mutex_init(&ec_ecdt->lock);
- atomic_set(&ec_ecdt->event_count, 1);
- if (acpi_ec_mode == EC_INTR) {
- init_waitqueue_head(&ec_ecdt->wait);
- }
+ struct acpi_ec *ec = context;
status = acpi_walk_resources(handle, METHOD_NAME__CRS,
- acpi_ec_io_ports, ec_ecdt);
+ ec_parse_io_ports, ec);
if (ACPI_FAILURE(status))
return status;
- ec_ecdt->uid = -1;
- acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->uid);
-
- status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->gpe);
+ /* Get GPE bit assignment (EC events). */
+ /* TODO: Add support for _GPE returning a package */
+ status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec->gpe);
if (ACPI_FAILURE(status))
return status;
- ec_ecdt->global_lock = TRUE;
- ec_ecdt->handle = handle;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx",
- ec_ecdt->gpe, ec_ecdt->command_addr,
- ec_ecdt->data_addr));
- return AE_CTRL_TERMINATE;
-}
-
-/*
- * Some BIOS (such as some from Gateway laptops) access EC region very early
- * such as in BAT0._INI or EC._INI before an EC device is found and
- * do not provide an ECDT. According to ACPI spec, ECDT isn't mandatorily
- * required, but if EC regison is accessed early, it is required.
- * The routine tries to workaround the BIOS bug by pre-scan EC device
- * It assumes that _CRS, _HID, _GPE, _UID methods of EC don't touch any
- * op region (since _REG isn't invoked yet). The assumption is true for
- * all systems found.
- */
-static int __init acpi_ec_fake_ecdt(void)
-{
- acpi_status status;
- int ret = 0;
+ /* Use the global lock for all EC transactions? */
+ acpi_evaluate_integer(handle, "_GLK", NULL, &ec->global_lock);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Try to make an fake ECDT"));
+ ec->handle = handle;
- ec_ecdt = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
- if (!ec_ecdt) {
- ret = -ENOMEM;
- goto error;
- }
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx",
+ ec->gpe, ec->command_addr, ec->data_addr));
- status = acpi_get_devices(ACPI_EC_HID,
- acpi_fake_ecdt_callback, NULL, NULL);
- if (ACPI_FAILURE(status)) {
- kfree(ec_ecdt);
- ec_ecdt = NULL;
- ret = -ENODEV;
- ACPI_EXCEPTION((AE_INFO, status, "Can't make an fake ECDT"));
- goto error;
- }
- return 0;
- error:
- return ret;
+ return AE_CTRL_TERMINATE;
}
-static int __init acpi_ec_get_real_ecdt(void)
+int __init acpi_ec_ecdt_probe(void)
{
+ int ret;
acpi_status status;
struct acpi_table_ecdt *ecdt_ptr;
- status = acpi_get_table(ACPI_SIG_ECDT, 1,
- (struct acpi_table_header **)&ecdt_ptr);
- if (ACPI_FAILURE(status))
- return -ENODEV;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found ECDT"));
-
+ boot_ec = make_acpi_ec();
+ if (!boot_ec)
+ return -ENOMEM;
/*
- * Generate a temporary ec context to use until the namespace is scanned
+ * Generate a boot ec context
*/
- ec_ecdt = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
- if (!ec_ecdt)
- return -ENOMEM;
- mutex_init(&ec_ecdt->lock);
- atomic_set(&ec_ecdt->event_count, 1);
- if (acpi_ec_mode == EC_INTR) {
- init_waitqueue_head(&ec_ecdt->wait);
- }
- ec_ecdt->command_addr = ecdt_ptr->control.address;
- ec_ecdt->data_addr = ecdt_ptr->data.address;
- ec_ecdt->gpe = ecdt_ptr->gpe;
- /* use the GL just to be safe */
- ec_ecdt->global_lock = TRUE;
- ec_ecdt->uid = ecdt_ptr->uid;
-
- status = acpi_get_handle(NULL, ecdt_ptr->id, &ec_ecdt->handle);
- if (ACPI_FAILURE(status)) {
+ status = acpi_get_table(ACPI_SIG_ECDT, 1,
+ (struct acpi_table_header **)&ecdt_ptr);
+ if (ACPI_FAILURE(status))
goto error;
- }
-
- return 0;
- error:
- ACPI_EXCEPTION((AE_INFO, status, "Could not use ECDT"));
- kfree(ec_ecdt);
- ec_ecdt = NULL;
- return -ENODEV;
-}
-
-static int __initdata acpi_fake_ecdt_enabled;
-int __init acpi_ec_ecdt_probe(void)
-{
- acpi_status status;
- int ret;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found ECDT"));
- ret = acpi_ec_get_real_ecdt();
- /* Try to make a fake ECDT */
- if (ret && acpi_fake_ecdt_enabled) {
- ret = acpi_ec_fake_ecdt();
- }
+ boot_ec->command_addr = ecdt_ptr->control.address;
+ boot_ec->data_addr = ecdt_ptr->data.address;
+ boot_ec->gpe = ecdt_ptr->gpe;
+ boot_ec->handle = ACPI_ROOT_OBJECT;
- if (ret)
+ ret = ec_install_handlers(boot_ec);
+ if (!ret) {
+ first_ec = boot_ec;
return 0;
-
- /*
- * Install GPE handler
- */
- status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe,
- ACPI_GPE_EDGE_TRIGGERED,
- &acpi_ec_gpe_handler, ec_ecdt);
- if (ACPI_FAILURE(status)) {
- goto error;
}
- acpi_set_gpe_type(NULL, ec_ecdt->gpe, ACPI_GPE_TYPE_RUNTIME);
- acpi_enable_gpe(NULL, ec_ecdt->gpe, ACPI_NOT_ISR);
-
- status = acpi_install_address_space_handler(ACPI_ROOT_OBJECT,
- ACPI_ADR_SPACE_EC,
- &acpi_ec_space_handler,
- &acpi_ec_space_setup,
- ec_ecdt);
- if (ACPI_FAILURE(status)) {
- acpi_remove_gpe_handler(NULL, ec_ecdt->gpe,
- &acpi_ec_gpe_handler);
- goto error;
- }
-
- return 0;
-
error:
- ACPI_EXCEPTION((AE_INFO, status, "Could not use ECDT"));
- kfree(ec_ecdt);
- ec_ecdt = NULL;
+ kfree(boot_ec);
+ boot_ec = NULL;
return -ENODEV;
}
}
#endif /* 0 */
-static int __init acpi_fake_ecdt_setup(char *str)
-{
- acpi_fake_ecdt_enabled = 1;
- return 1;
-}
-
-__setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
static int __init acpi_ec_set_intr_mode(char *str)
{
int intr;
if (!get_option(&str, &intr))
return 0;
- if (intr) {
- acpi_ec_mode = EC_INTR;
- } else {
- acpi_ec_mode = EC_POLL;
- }
- acpi_ec_driver.ops.add = acpi_ec_add;
+ acpi_ec_mode = (intr) ? EC_INTR : EC_POLL;
+
printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling");
return 1;
notify_info->notify.value = (u16) notify_value;
notify_info->notify.handler_obj = handler_obj;
- acpi_ex_relinquish_interpreter();
+ acpi_ex_exit_interpreter();
acpi_ev_notify_dispatch(notify_info);
- acpi_ex_reacquire_interpreter();
+ status = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
}
if (!handler_obj) {
u32 bit_width, acpi_integer * value)
{
acpi_status status;
+ acpi_status status2;
acpi_adr_space_handler handler;
acpi_adr_space_setup region_setup;
union acpi_operand_object *handler_desc;
* setup will potentially execute control methods
* (e.g., _REG method for this region)
*/
- acpi_ex_relinquish_interpreter();
+ acpi_ex_exit_interpreter();
status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
handler_desc->address_space.context,
/* Re-enter the interpreter */
- acpi_ex_reacquire_interpreter();
+ status2 = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
/* Check for failure of the Region Setup */
* exit the interpreter because the handler *might* block -- we don't
* know what it will do, so we can't hold the lock on the intepreter.
*/
- acpi_ex_relinquish_interpreter();
+ acpi_ex_exit_interpreter();
}
/* Call the handler */
* We just returned from a non-default handler, we must re-enter the
* interpreter
*/
- acpi_ex_reacquire_interpreter();
+ status2 = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
}
return_ACPI_STATUS(status);
return (AE_BAD_PARAMETER);
}
- /* Must lock interpreter to prevent race conditions */
+ status = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
- acpi_ex_enter_interpreter();
status = acpi_ev_acquire_global_lock(timeout);
acpi_ex_exit_interpreter();
* Get the sync_level. If method is serialized, a mutex will be
* created for this method when it is parsed.
*/
- if (method_flags & AML_METHOD_SERIALIZED) {
+ if (acpi_gbl_all_methods_serialized) {
+ obj_desc->method.sync_level = 0;
+ obj_desc->method.method_flags |= AML_METHOD_SERIALIZED;
+ } else if (method_flags & AML_METHOD_SERIALIZED) {
/*
* ACPI 1.0: sync_level = 0
* ACPI 2.0: sync_level = sync_level in method declaration
acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
{
acpi_status status;
+ acpi_status status2;
ACPI_FUNCTION_TRACE(ex_system_wait_semaphore);
/* We must wait, so unlock the interpreter */
- acpi_ex_relinquish_interpreter();
+ acpi_ex_exit_interpreter();
status = acpi_os_wait_semaphore(semaphore, 1, timeout);
/* Reacquire the interpreter */
- acpi_ex_reacquire_interpreter();
+ status2 = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status2)) {
+
+ /* Report fatal error, could not acquire interpreter */
+
+ return_ACPI_STATUS(status2);
+ }
}
return_ACPI_STATUS(status);
acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
{
acpi_status status;
+ acpi_status status2;
ACPI_FUNCTION_TRACE(ex_system_wait_mutex);
/* We must wait, so unlock the interpreter */
- acpi_ex_relinquish_interpreter();
+ acpi_ex_exit_interpreter();
status = acpi_os_acquire_mutex(mutex, timeout);
/* Reacquire the interpreter */
- acpi_ex_reacquire_interpreter();
+ status2 = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status2)) {
+
+ /* Report fatal error, could not acquire interpreter */
+
+ return_ACPI_STATUS(status2);
+ }
}
return_ACPI_STATUS(status);
acpi_status acpi_ex_system_do_suspend(acpi_integer how_long)
{
+ acpi_status status;
+
ACPI_FUNCTION_ENTRY();
/* Since this thread will sleep, we must release the interpreter */
- acpi_ex_relinquish_interpreter();
+ acpi_ex_exit_interpreter();
acpi_os_sleep(how_long);
/* And now we must get the interpreter again */
- acpi_ex_reacquire_interpreter();
- return (AE_OK);
+ status = acpi_ex_enter_interpreter();
+ return (status);
}
/*******************************************************************************
*
* PARAMETERS: None
*
- * RETURN: None
+ * RETURN: Status
*
- * DESCRIPTION: Enter the interpreter execution region. Failure to enter
- * the interpreter region is a fatal system error. Used in
- * conjunction with exit_interpreter.
+ * DESCRIPTION: Enter the interpreter execution region. Failure to enter
+ * the interpreter region is a fatal system error
*
******************************************************************************/
-void acpi_ex_enter_interpreter(void)
+acpi_status acpi_ex_enter_interpreter(void)
{
acpi_status status;
status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not acquire AML Interpreter mutex"));
+ ACPI_ERROR((AE_INFO, "Could not acquire interpreter mutex"));
}
- return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ex_reacquire_interpreter
- *
- * PARAMETERS: None
- *
- * RETURN: None
- *
- * DESCRIPTION: Reacquire the interpreter execution region from within the
- * interpreter code. Failure to enter the interpreter region is a
- * fatal system error. Used in conjuction with
- * relinquish_interpreter
- *
- ******************************************************************************/
-
-void acpi_ex_reacquire_interpreter(void)
-{
- ACPI_FUNCTION_TRACE(ex_reacquire_interpreter);
-
- /*
- * If the global serialized flag is set, do not release the interpreter,
- * since it was not actually released by acpi_ex_relinquish_interpreter.
- * This forces the interpreter to be single threaded.
- */
- if (!acpi_gbl_all_methods_serialized) {
- acpi_ex_enter_interpreter();
- }
-
- return_VOID;
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* RETURN: None
*
- * DESCRIPTION: Exit the interpreter execution region. This is the top level
- * routine used to exit the interpreter when all processing has
- * been completed.
+ * DESCRIPTION: Exit the interpreter execution region
+ *
+ * Cases where the interpreter is unlocked:
+ * 1) Completion of the execution of a control method
+ * 2) Method blocked on a Sleep() AML opcode
+ * 3) Method blocked on an Acquire() AML opcode
+ * 4) Method blocked on a Wait() AML opcode
+ * 5) Method blocked to acquire the global lock
+ * 6) Method blocked to execute a serialized control method that is
+ * already executing
+ * 7) About to invoke a user-installed opregion handler
*
******************************************************************************/
status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not release AML Interpreter mutex"));
- }
-
- return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ex_relinquish_interpreter
- *
- * PARAMETERS: None
- *
- * RETURN: None
- *
- * DESCRIPTION: Exit the interpreter execution region, from within the
- * interpreter - before attempting an operation that will possibly
- * block the running thread.
- *
- * Cases where the interpreter is unlocked internally
- * 1) Method to be blocked on a Sleep() AML opcode
- * 2) Method to be blocked on an Acquire() AML opcode
- * 3) Method to be blocked on a Wait() AML opcode
- * 4) Method to be blocked to acquire the global lock
- * 5) Method to be blocked waiting to execute a serialized control method
- * that is currently executing
- * 6) About to invoke a user-installed opregion handler
- *
- ******************************************************************************/
-
-void acpi_ex_relinquish_interpreter(void)
-{
- ACPI_FUNCTION_TRACE(ex_relinquish_interpreter);
-
- /*
- * If the global serialized flag is set, do not release the interpreter.
- * This forces the interpreter to be single threaded.
- */
- if (!acpi_gbl_all_methods_serialized) {
- acpi_ex_exit_interpreter();
+ ACPI_ERROR((AE_INFO, "Could not release interpreter mutex"));
}
return_VOID;
*
* RETURN: none
*
- * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
- * 32-bit, as determined by the revision of the DSDT.
+ * DESCRIPTION: Truncate a number to 32-bits if the currently executing method
+ * belongs to a 32-bit ACPI table.
*
******************************************************************************/
/*
* 2) Enable all wakeup GPEs
*/
+ status = acpi_hw_disable_all_gpes();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
acpi_gbl_system_awake_and_running = FALSE;
status = acpi_hw_enable_all_wakeup_gpes();
+++ /dev/null
-/*
- * ibm_acpi.c - IBM ThinkPad ACPI Extras
- *
- *
- * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
- * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define IBM_VERSION "0.13"
-
-/*
- * Changelog:
- *
- * 2006-11-22 0.13 new maintainer
- * changelog now lives in git commit history, and will
- * not be updated further in-file.
- *
- * 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels
- * 2005-03-17 0.11 support for 600e, 770x
- * thanks to Jamie Lentin <lentinj@dial.pipex.com>
- * support for 770e, G41
- * G40 and G41 don't have a thinklight
- * temperatures no longer experimental
- * experimental brightness control
- * experimental volume control
- * experimental fan enable/disable
- * 2005-01-16 0.10 fix module loading on R30, R31
- * 2005-01-16 0.9 support for 570, R30, R31
- * ultrabay support on A22p, A3x
- * limit arg for cmos, led, beep, drop experimental status
- * more capable led control on A21e, A22p, T20-22, X20
- * experimental temperatures and fan speed
- * experimental embedded controller register dump
- * mark more functions as __init, drop incorrect __exit
- * use MODULE_VERSION
- * thanks to Henrik Brix Andersen <brix@gentoo.org>
- * fix parameter passing on module loading
- * thanks to Rusty Russell <rusty@rustcorp.com.au>
- * thanks to Jim Radford <radford@blackbean.org>
- * 2004-11-08 0.8 fix init error case, don't return from a macro
- * thanks to Chris Wright <chrisw@osdl.org>
- * 2004-10-23 0.7 fix module loading on A21e, A22p, T20, T21, X20
- * fix led control on A21e
- * 2004-10-19 0.6 use acpi_bus_register_driver() to claim HKEY device
- * 2004-10-18 0.5 thinklight support on A21e, G40, R32, T20, T21, X20
- * proc file format changed
- * video_switch command
- * experimental cmos control
- * experimental led control
- * experimental acpi sounds
- * 2004-09-16 0.4 support for module parameters
- * hotkey mask can be prefixed by 0x
- * video output switching
- * video expansion control
- * ultrabay eject support
- * removed lcd brightness/on/off control, didn't work
- * 2004-08-17 0.3 support for R40
- * lcd off, brightness control
- * thinklight on/off
- * 2004-08-14 0.2 support for T series, X20
- * bluetooth enable/disable
- * hotkey events disabled by default
- * removed fan control, currently useless
- * 2004-08-09 0.1 initial release, support for X series
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <linux/proc_fs.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <asm/uaccess.h>
-
-#include <linux/dmi.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
-
-#include <acpi/acpi_drivers.h>
-#include <acpi/acnamesp.h>
-
-#define IBM_NAME "ibm"
-#define IBM_DESC "IBM ThinkPad ACPI Extras"
-#define IBM_FILE "ibm_acpi"
-#define IBM_URL "http://ibm-acpi.sf.net/"
-
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
-MODULE_DESCRIPTION(IBM_DESC);
-MODULE_VERSION(IBM_VERSION);
-MODULE_LICENSE("GPL");
-
-#define IBM_DIR IBM_NAME
-
-#define IBM_LOG IBM_FILE ": "
-#define IBM_ERR KERN_ERR IBM_LOG
-#define IBM_NOTICE KERN_NOTICE IBM_LOG
-#define IBM_INFO KERN_INFO IBM_LOG
-#define IBM_DEBUG KERN_DEBUG IBM_LOG
-
-#define IBM_MAX_ACPI_ARGS 3
-
-#define __unused __attribute__ ((unused))
-
-static int experimental;
-module_param(experimental, int, 0);
-
-static acpi_handle root_handle = NULL;
-
-#define IBM_HANDLE(object, parent, paths...) \
- static acpi_handle object##_handle; \
- static acpi_handle *object##_parent = &parent##_handle; \
- static char *object##_path; \
- static char *object##_paths[] = { paths }
-
-IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */
- "\\_SB.PCI.ISA.EC", /* 570 */
- "\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */
- "\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */
- "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */
- "\\_SB.PCI0.ICH3.EC0", /* R31 */
- "\\_SB.PCI0.LPC.EC", /* all others */
- );
-
-IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */
- "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */
- "\\_SB.PCI0.VID0", /* 770e */
- "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */
- "\\_SB.PCI0.AGP.VID", /* all others */
- ); /* R30, R31 */
-
-IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */
-
-IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */
- "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */
- "\\CMS", /* R40, R40e */
- ); /* all others */
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
- "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
- "\\_SB.PCI0.PCI1.DOCK", /* all others */
- "\\_SB.PCI.ISA.SLCE", /* 570 */
- ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
- "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
- "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
- "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
- ); /* A21e, R30, R31 */
-
-IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
- "_EJ0", /* all others */
- ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-
-IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */
- "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
- ); /* all others */
-
-IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
- "_EJ0", /* 770x */
- ); /* all others */
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
-
-IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */
- "^HKEY", /* R30, R31 */
- "HKEY", /* all others */
- ); /* 570 */
-
-IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */
-IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */
-
-IBM_HANDLE(led, ec, "SLED", /* 570 */
- "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
- "LED", /* all others */
- ); /* R30, R31 */
-
-IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
-IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */
-IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */
-IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */
-
-IBM_HANDLE(gfan, ec, "GFAN", /* 570 */
- "\\FSPD", /* 600e/x, 770e, 770x */
- ); /* all others */
-
-IBM_HANDLE(sfan, ec, "SFAN", /* 570 */
- "JFNS", /* 770x-JL */
- ); /* all others */
-
-#define IBM_HKEY_HID "IBM0068"
-#define IBM_PCI_HID "PNP0A03"
-
-enum thermal_access_mode {
- IBMACPI_THERMAL_NONE = 0, /* No thermal support */
- IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */
- IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */
- IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */
- IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */
-};
-
-#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */
-struct ibm_thermal_sensors_struct {
- s32 temp[IBMACPI_MAX_THERMAL_SENSORS];
-};
-
-/*
- * FAN ACCESS MODES
- *
- * IBMACPI_FAN_RD_ACPI_GFAN:
- * ACPI GFAN method: returns fan level
- *
- * see IBMACPI_FAN_WR_ACPI_SFAN
- * EC 0x2f not available if GFAN exists
- *
- * IBMACPI_FAN_WR_ACPI_SFAN:
- * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
- *
- * EC 0x2f might be available *for reading*, but never for writing.
- *
- * IBMACPI_FAN_WR_TPEC:
- * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported
- * on almost all ThinkPads
- *
- * Fan speed changes of any sort (including those caused by the
- * disengaged mode) are usually done slowly by the firmware as the
- * maximum ammount of fan duty cycle change per second seems to be
- * limited.
- *
- * Reading is not available if GFAN exists.
- * Writing is not available if SFAN exists.
- *
- * Bits
- * 7 automatic mode engaged;
- * (default operation mode of the ThinkPad)
- * fan level is ignored in this mode.
- * 6 disengage mode (takes precedence over bit 7);
- * not available on all thinkpads. May disable
- * the tachometer, and speeds up fan to 100% duty-cycle,
- * which speeds it up far above the standard RPM
- * levels. It is not impossible that it could cause
- * hardware damage.
- * 5-3 unused in some models. Extra bits for fan level
- * in others, but still useless as all values above
- * 7 map to the same speed as level 7 in these models.
- * 2-0 fan level (0..7 usually)
- * 0x00 = stop
- * 0x07 = max (set when temperatures critical)
- * Some ThinkPads may have other levels, see
- * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
- *
- * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
- * boot. Apparently the EC does not intialize it, so unless ACPI DSDT
- * does so, its initial value is meaningless (0x07).
- *
- * For firmware bugs, refer to:
- * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * ----
- *
- * ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
- * Main fan tachometer reading (in RPM)
- *
- * This register is present on all ThinkPads with a new-style EC, and
- * it is known not to be present on the A21m/e, and T22, as there is
- * something else in offset 0x84 according to the ACPI DSDT. Other
- * ThinkPads from this same time period (and earlier) probably lack the
- * tachometer as well.
- *
- * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
- * was never fixed by IBM to report the EC firmware version string
- * probably support the tachometer (like the early X models), so
- * detecting it is quite hard. We need more data to know for sure.
- *
- * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
- * might result.
- *
- * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this
- * register is not invalidated in ThinkPads that disable tachometer
- * readings. Thus, the tachometer readings go stale.
- *
- * For firmware bugs, refer to:
- * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * IBMACPI_FAN_WR_ACPI_FANS:
- * ThinkPad X31, X40, X41. Not available in the X60.
- *
- * FANS ACPI handle: takes three arguments: low speed, medium speed,
- * high speed. ACPI DSDT seems to map these three speeds to levels
- * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
- * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
- *
- * The speeds are stored on handles
- * (FANA:FAN9), (FANC:FANB), (FANE:FAND).
- *
- * There are three default speed sets, acessible as handles:
- * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
- *
- * ACPI DSDT switches which set is in use depending on various
- * factors.
- *
- * IBMACPI_FAN_WR_TPEC is also available and should be used to
- * command the fan. The X31/X40/X41 seems to have 8 fan levels,
- * but the ACPI tables just mention level 7.
- */
-
-enum fan_status_access_mode {
- IBMACPI_FAN_NONE = 0, /* No fan status or control */
- IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */
- IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */
-};
-
-enum fan_control_access_mode {
- IBMACPI_FAN_WR_NONE = 0, /* No fan control */
- IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */
- IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */
- IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */
-};
-
-enum fan_control_commands {
- IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */
- IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */
- IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd,
- * and also watchdog cmd */
-};
-
-enum { /* Fan control constants */
- fan_status_offset = 0x2f, /* EC register 0x2f */
- fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
- * 0x84 must be read before 0x85 */
-
- IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer
- * disengaged */
- IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan
- * control */
-};
-
-static char *ibm_thinkpad_ec_found = NULL;
-
-struct ibm_struct {
- char *name;
- char param[32];
-
- char *hid;
- struct acpi_driver *driver;
-
- int (*init) (void);
- int (*read) (char *);
- int (*write) (char *);
- void (*exit) (void);
-
- void (*notify) (struct ibm_struct *, u32);
- acpi_handle *handle;
- int type;
- struct acpi_device *device;
-
- int driver_registered;
- int proc_created;
- int init_called;
- int notify_installed;
-
- int experimental;
-};
-
-static struct proc_dir_entry *proc_dir = NULL;
-
-static struct backlight_device *ibm_backlight_device = NULL;
-
-#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
-#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
-#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
-
-static int acpi_evalf(acpi_handle handle,
- void *res, char *method, char *fmt, ...)
-{
- char *fmt0 = fmt;
- struct acpi_object_list params;
- union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
- struct acpi_buffer result, *resultp;
- union acpi_object out_obj;
- acpi_status status;
- va_list ap;
- char res_type;
- int success;
- int quiet;
-
- if (!*fmt) {
- printk(IBM_ERR "acpi_evalf() called with empty format\n");
- return 0;
- }
-
- if (*fmt == 'q') {
- quiet = 1;
- fmt++;
- } else
- quiet = 0;
-
- res_type = *(fmt++);
-
- params.count = 0;
- params.pointer = &in_objs[0];
-
- va_start(ap, fmt);
- while (*fmt) {
- char c = *(fmt++);
- switch (c) {
- case 'd': /* int */
- in_objs[params.count].integer.value = va_arg(ap, int);
- in_objs[params.count++].type = ACPI_TYPE_INTEGER;
- break;
- /* add more types as needed */
- default:
- printk(IBM_ERR "acpi_evalf() called "
- "with invalid format character '%c'\n", c);
- return 0;
- }
- }
- va_end(ap);
-
- if (res_type != 'v') {
- result.length = sizeof(out_obj);
- result.pointer = &out_obj;
- resultp = &result;
- } else
- resultp = NULL;
-
- status = acpi_evaluate_object(handle, method, ¶ms, resultp);
-
- switch (res_type) {
- case 'd': /* int */
- if (res)
- *(int *)res = out_obj.integer.value;
- success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
- break;
- case 'v': /* void */
- success = status == AE_OK;
- break;
- /* add more types as needed */
- default:
- printk(IBM_ERR "acpi_evalf() called "
- "with invalid format character '%c'\n", res_type);
- return 0;
- }
-
- if (!success && !quiet)
- printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
- method, fmt0, status);
-
- return success;
-}
-
-static void __unused acpi_print_int(acpi_handle handle, char *method)
-{
- int i;
-
- if (acpi_evalf(handle, &i, method, "d"))
- printk(IBM_INFO "%s = 0x%x\n", method, i);
- else
- printk(IBM_ERR "error calling %s\n", method);
-}
-
-static char *next_cmd(char **cmds)
-{
- char *start = *cmds;
- char *end;
-
- while ((end = strchr(start, ',')) && end == start)
- start = end + 1;
-
- if (!end)
- return NULL;
-
- *end = 0;
- *cmds = end + 1;
- return start;
-}
-
-static int ibm_acpi_driver_init(void)
-{
- printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
- printk(IBM_INFO "%s\n", IBM_URL);
-
- if (ibm_thinkpad_ec_found)
- printk(IBM_INFO "ThinkPad EC firmware %s\n",
- ibm_thinkpad_ec_found);
-
- return 0;
-}
-
-static int driver_read(char *p)
-{
- int len = 0;
-
- len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
- len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
-
- return len;
-}
-
-static int hotkey_supported;
-static int hotkey_mask_supported;
-static int hotkey_orig_status;
-static int hotkey_orig_mask;
-
-static int hotkey_get(int *status, int *mask)
-{
- if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
- return 0;
-
- if (hotkey_mask_supported)
- if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
- return 0;
-
- return 1;
-}
-
-static int hotkey_set(int status, int mask)
-{
- int i;
-
- if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
- return 0;
-
- if (hotkey_mask_supported)
- for (i = 0; i < 32; i++) {
- int bit = ((1 << i) & mask) != 0;
- if (!acpi_evalf(hkey_handle,
- NULL, "MHKM", "vdd", i + 1, bit))
- return 0;
- }
-
- return 1;
-}
-
-static int hotkey_init(void)
-{
- /* hotkey not supported on 570 */
- hotkey_supported = hkey_handle != NULL;
-
- if (hotkey_supported) {
- /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- A30, R30, R31, T20-22, X20-21, X22-24 */
- hotkey_mask_supported =
- acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
-
- if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask))
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int hotkey_read(char *p)
-{
- int status, mask;
- int len = 0;
-
- if (!hotkey_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
- }
-
- if (!hotkey_get(&status, &mask))
- return -EIO;
-
- len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
- if (hotkey_mask_supported) {
- len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
- len += sprintf(p + len,
- "commands:\tenable, disable, reset, <mask>\n");
- } else {
- len += sprintf(p + len, "mask:\t\tnot supported\n");
- len += sprintf(p + len, "commands:\tenable, disable, reset\n");
- }
-
- return len;
-}
-
-static int hotkey_write(char *buf)
-{
- int status, mask;
- char *cmd;
- int do_cmd = 0;
-
- if (!hotkey_supported)
- return -ENODEV;
-
- if (!hotkey_get(&status, &mask))
- return -EIO;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "enable") == 0) {
- status = 1;
- } else if (strlencmp(cmd, "disable") == 0) {
- status = 0;
- } else if (strlencmp(cmd, "reset") == 0) {
- status = hotkey_orig_status;
- mask = hotkey_orig_mask;
- } else if (sscanf(cmd, "0x%x", &mask) == 1) {
- /* mask set */
- } else if (sscanf(cmd, "%x", &mask) == 1) {
- /* mask set */
- } else
- return -EINVAL;
- do_cmd = 1;
- }
-
- if (do_cmd && !hotkey_set(status, mask))
- return -EIO;
-
- return 0;
-}
-
-static void hotkey_exit(void)
-{
- if (hotkey_supported)
- hotkey_set(hotkey_orig_status, hotkey_orig_mask);
-}
-
-static void hotkey_notify(struct ibm_struct *ibm, u32 event)
-{
- int hkey;
-
- if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
- acpi_bus_generate_event(ibm->device, event, hkey);
- else {
- printk(IBM_ERR "unknown hotkey event %d\n", event);
- acpi_bus_generate_event(ibm->device, event, 0);
- }
-}
-
-static int bluetooth_supported;
-
-static int bluetooth_init(void)
-{
- /* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
- bluetooth_supported = hkey_handle &&
- acpi_evalf(hkey_handle, NULL, "GBDC", "qv");
-
- return 0;
-}
-
-static int bluetooth_status(void)
-{
- int status;
-
- if (!bluetooth_supported ||
- !acpi_evalf(hkey_handle, &status, "GBDC", "d"))
- status = 0;
-
- return status;
-}
-
-static int bluetooth_read(char *p)
-{
- int len = 0;
- int status = bluetooth_status();
-
- if (!bluetooth_supported)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!(status & 1))
- len += sprintf(p + len, "status:\t\tnot installed\n");
- else {
- len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
- len += sprintf(p + len, "commands:\tenable, disable\n");
- }
-
- return len;
-}
-
-static int bluetooth_write(char *buf)
-{
- int status = bluetooth_status();
- char *cmd;
- int do_cmd = 0;
-
- if (!bluetooth_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "enable") == 0) {
- status |= 2;
- } else if (strlencmp(cmd, "disable") == 0) {
- status &= ~2;
- } else
- return -EINVAL;
- do_cmd = 1;
- }
-
- if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
- return -EIO;
-
- return 0;
-}
-
-static int wan_supported;
-
-static int wan_init(void)
-{
- wan_supported = hkey_handle &&
- acpi_evalf(hkey_handle, NULL, "GWAN", "qv");
-
- return 0;
-}
-
-static int wan_status(void)
-{
- int status;
-
- if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
- status = 0;
-
- return status;
-}
-
-static int wan_read(char *p)
-{
- int len = 0;
- int status = wan_status();
-
- if (!wan_supported)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!(status & 1))
- len += sprintf(p + len, "status:\t\tnot installed\n");
- else {
- len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
- len += sprintf(p + len, "commands:\tenable, disable\n");
- }
-
- return len;
-}
-
-static int wan_write(char *buf)
-{
- int status = wan_status();
- char *cmd;
- int do_cmd = 0;
-
- if (!wan_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "enable") == 0) {
- status |= 2;
- } else if (strlencmp(cmd, "disable") == 0) {
- status &= ~2;
- } else
- return -EINVAL;
- do_cmd = 1;
- }
-
- if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
- return -EIO;
-
- return 0;
-}
-
-enum video_access_mode {
- IBMACPI_VIDEO_NONE = 0,
- IBMACPI_VIDEO_570, /* 570 */
- IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */
- IBMACPI_VIDEO_NEW, /* all others */
-};
-
-static enum video_access_mode video_supported;
-static int video_orig_autosw;
-
-static int video_init(void)
-{
- int ivga;
-
- if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
- /* G41, assume IVGA doesn't change */
- vid_handle = vid2_handle;
-
- if (!vid_handle)
- /* video switching not supported on R30, R31 */
- video_supported = IBMACPI_VIDEO_NONE;
- else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
- /* 570 */
- video_supported = IBMACPI_VIDEO_570;
- else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
- /* 600e/x, 770e, 770x */
- video_supported = IBMACPI_VIDEO_770;
- else
- /* all others */
- video_supported = IBMACPI_VIDEO_NEW;
-
- return 0;
-}
-
-static int video_status(void)
-{
- int status = 0;
- int i;
-
- if (video_supported == IBMACPI_VIDEO_570) {
- if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87))
- status = i & 3;
- } else if (video_supported == IBMACPI_VIDEO_770) {
- if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
- status |= 0x01 * i;
- if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
- status |= 0x02 * i;
- } else if (video_supported == IBMACPI_VIDEO_NEW) {
- acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1);
- if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
- status |= 0x02 * i;
-
- acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0);
- if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
- status |= 0x01 * i;
- if (acpi_evalf(NULL, &i, "\\VCDD", "d"))
- status |= 0x08 * i;
- }
-
- return status;
-}
-
-static int video_autosw(void)
-{
- int autosw = 0;
-
- if (video_supported == IBMACPI_VIDEO_570)
- acpi_evalf(vid_handle, &autosw, "SWIT", "d");
- else if (video_supported == IBMACPI_VIDEO_770 ||
- video_supported == IBMACPI_VIDEO_NEW)
- acpi_evalf(vid_handle, &autosw, "^VDEE", "d");
-
- return autosw & 1;
-}
-
-static int video_read(char *p)
-{
- int status = video_status();
- int autosw = video_autosw();
- int len = 0;
-
- if (!video_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
- }
-
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
- len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
- if (video_supported == IBMACPI_VIDEO_NEW)
- len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
- len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
- len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
- len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
- if (video_supported == IBMACPI_VIDEO_NEW)
- len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
- len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
- len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
-
- return len;
-}
-
-static int video_switch(void)
-{
- int autosw = video_autosw();
- int ret;
-
- if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
- return -EIO;
- ret = video_supported == IBMACPI_VIDEO_570 ?
- acpi_evalf(ec_handle, NULL, "_Q16", "v") :
- acpi_evalf(vid_handle, NULL, "VSWT", "v");
- acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
-
- return ret;
-}
-
-static int video_expand(void)
-{
- if (video_supported == IBMACPI_VIDEO_570)
- return acpi_evalf(ec_handle, NULL, "_Q17", "v");
- else if (video_supported == IBMACPI_VIDEO_770)
- return acpi_evalf(vid_handle, NULL, "VEXP", "v");
- else
- return acpi_evalf(NULL, NULL, "\\VEXP", "v");
-}
-
-static int video_switch2(int status)
-{
- int ret;
-
- if (video_supported == IBMACPI_VIDEO_570) {
- ret = acpi_evalf(NULL, NULL,
- "\\_SB.PHS2", "vdd", 0x8b, status | 0x80);
- } else if (video_supported == IBMACPI_VIDEO_770) {
- int autosw = video_autosw();
- if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
- return -EIO;
-
- ret = acpi_evalf(vid_handle, NULL,
- "ASWT", "vdd", status * 0x100, 0);
-
- acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
- } else {
- ret = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
- acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
- }
-
- return ret;
-}
-
-static int video_write(char *buf)
-{
- char *cmd;
- int enable, disable, status;
-
- if (!video_supported)
- return -ENODEV;
-
- enable = disable = 0;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "lcd_enable") == 0) {
- enable |= 0x01;
- } else if (strlencmp(cmd, "lcd_disable") == 0) {
- disable |= 0x01;
- } else if (strlencmp(cmd, "crt_enable") == 0) {
- enable |= 0x02;
- } else if (strlencmp(cmd, "crt_disable") == 0) {
- disable |= 0x02;
- } else if (video_supported == IBMACPI_VIDEO_NEW &&
- strlencmp(cmd, "dvi_enable") == 0) {
- enable |= 0x08;
- } else if (video_supported == IBMACPI_VIDEO_NEW &&
- strlencmp(cmd, "dvi_disable") == 0) {
- disable |= 0x08;
- } else if (strlencmp(cmd, "auto_enable") == 0) {
- if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
- return -EIO;
- } else if (strlencmp(cmd, "auto_disable") == 0) {
- if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 0))
- return -EIO;
- } else if (strlencmp(cmd, "video_switch") == 0) {
- if (!video_switch())
- return -EIO;
- } else if (strlencmp(cmd, "expand_toggle") == 0) {
- if (!video_expand())
- return -EIO;
- } else
- return -EINVAL;
- }
-
- if (enable || disable) {
- status = (video_status() & 0x0f & ~disable) | enable;
- if (!video_switch2(status))
- return -EIO;
- }
-
- return 0;
-}
-
-static void video_exit(void)
-{
- acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw);
-}
-
-static int light_supported;
-static int light_status_supported;
-
-static int light_init(void)
-{
- /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
- light_supported = (cmos_handle || lght_handle) && !ledb_handle;
-
- if (light_supported)
- /* light status not supported on
- 570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
- light_status_supported = acpi_evalf(ec_handle, NULL,
- "KBLT", "qv");
-
- return 0;
-}
-
-static int light_read(char *p)
-{
- int len = 0;
- int status = 0;
-
- if (!light_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- } else if (!light_status_supported) {
- len += sprintf(p + len, "status:\t\tunknown\n");
- len += sprintf(p + len, "commands:\ton, off\n");
- } else {
- if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
- return -EIO;
- len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
- len += sprintf(p + len, "commands:\ton, off\n");
- }
-
- return len;
-}
-
-static int light_write(char *buf)
-{
- int cmos_cmd, lght_cmd;
- char *cmd;
- int success;
-
- if (!light_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "on") == 0) {
- cmos_cmd = 0x0c;
- lght_cmd = 1;
- } else if (strlencmp(cmd, "off") == 0) {
- cmos_cmd = 0x0d;
- lght_cmd = 0;
- } else
- return -EINVAL;
-
- success = cmos_handle ?
- acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
- acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
- if (!success)
- return -EIO;
- }
-
- return 0;
-}
-
-#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
-static int _sta(acpi_handle handle)
-{
- int status;
-
- if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
- status = 0;
-
- return status;
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_DOCK
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int dock_read(char *p)
-{
- int len = 0;
- int docked = dock_docked();
-
- if (!dock_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!docked)
- len += sprintf(p + len, "status:\t\tundocked\n");
- else {
- len += sprintf(p + len, "status:\t\tdocked\n");
- len += sprintf(p + len, "commands:\tdock, undock\n");
- }
-
- return len;
-}
-
-static int dock_write(char *buf)
-{
- char *cmd;
-
- if (!dock_docked())
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "undock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
- !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
- return -EIO;
- } else if (strlencmp(cmd, "dock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
- int docked = dock_docked();
- int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID);
-
- if (event == 1 && !pci) /* 570 */
- acpi_bus_generate_event(ibm->device, event, 1); /* button */
- else if (event == 1 && pci) /* 570 */
- acpi_bus_generate_event(ibm->device, event, 3); /* dock */
- else if (event == 3 && docked)
- acpi_bus_generate_event(ibm->device, event, 1); /* button */
- else if (event == 3 && !docked)
- acpi_bus_generate_event(ibm->device, event, 2); /* undock */
- else if (event == 0 && docked)
- acpi_bus_generate_event(ibm->device, event, 3); /* dock */
- else {
- printk(IBM_ERR "unknown dock event %d, status %d\n",
- event, _sta(dock_handle));
- acpi_bus_generate_event(ibm->device, event, 0); /* unknown */
- }
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_BAY
-static int bay_status_supported;
-static int bay_status2_supported;
-static int bay_eject_supported;
-static int bay_eject2_supported;
-
-static int bay_init(void)
-{
- bay_status_supported = bay_handle &&
- acpi_evalf(bay_handle, NULL, "_STA", "qv");
- bay_status2_supported = bay2_handle &&
- acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
- bay_eject_supported = bay_handle && bay_ej_handle &&
- (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
- bay_eject2_supported = bay2_handle && bay2_ej_handle &&
- (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
- return 0;
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
- int len = 0;
- int occupied = bay_occupied(bay);
- int occupied2 = bay_occupied(bay2);
- int eject, eject2;
-
- len += sprintf(p + len, "status:\t\t%s\n", bay_status_supported ?
- (occupied ? "occupied" : "unoccupied") :
- "not supported");
- if (bay_status2_supported)
- len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
- "occupied" : "unoccupied");
-
- eject = bay_eject_supported && occupied;
- eject2 = bay_eject2_supported && occupied2;
-
- if (eject && eject2)
- len += sprintf(p + len, "commands:\teject, eject2\n");
- else if (eject)
- len += sprintf(p + len, "commands:\teject\n");
- else if (eject2)
- len += sprintf(p + len, "commands:\teject2\n");
-
- return len;
-}
-
-static int bay_write(char *buf)
-{
- char *cmd;
-
- if (!bay_eject_supported && !bay_eject2_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (bay_eject_supported && strlencmp(cmd, "eject") == 0) {
- if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else if (bay_eject2_supported &&
- strlencmp(cmd, "eject2") == 0) {
- if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
- acpi_bus_generate_event(ibm->device, event, 0);
-}
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-static int cmos_read(char *p)
-{
- int len = 0;
-
- /* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- R30, R31, T20-22, X20-21 */
- if (!cmos_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else {
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
- }
-
- return len;
-}
-
-static int cmos_eval(int cmos_cmd)
-{
- if (cmos_handle)
- return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd);
- else
- return 1;
-}
-
-static int cmos_write(char *buf)
-{
- char *cmd;
- int cmos_cmd;
-
- if (!cmos_handle)
- return -EINVAL;
-
- while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
- cmos_cmd >= 0 && cmos_cmd <= 21) {
- /* cmos_cmd set */
- } else
- return -EINVAL;
-
- if (!cmos_eval(cmos_cmd))
- return -EIO;
- }
-
- return 0;
-}
-
-enum led_access_mode {
- IBMACPI_LED_NONE = 0,
- IBMACPI_LED_570, /* 570 */
- IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
- IBMACPI_LED_NEW, /* all others */
-};
-static enum led_access_mode led_supported;
-
-static int led_init(void)
-{
- if (!led_handle)
- /* led not supported on R30, R31 */
- led_supported = IBMACPI_LED_NONE;
- else if (strlencmp(led_path, "SLED") == 0)
- /* 570 */
- led_supported = IBMACPI_LED_570;
- else if (strlencmp(led_path, "SYSL") == 0)
- /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
- led_supported = IBMACPI_LED_OLD;
- else
- /* all others */
- led_supported = IBMACPI_LED_NEW;
-
- return 0;
-}
-
-#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
-
-static int led_read(char *p)
-{
- int len = 0;
-
- if (!led_supported) {
- len += sprintf(p + len, "status:\t\tnot supported\n");
- return len;
- }
- len += sprintf(p + len, "status:\t\tsupported\n");
-
- if (led_supported == IBMACPI_LED_570) {
- /* 570 */
- int i, status;
- for (i = 0; i < 8; i++) {
- if (!acpi_evalf(ec_handle,
- &status, "GLED", "dd", 1 << i))
- return -EIO;
- len += sprintf(p + len, "%d:\t\t%s\n",
- i, led_status(status));
- }
- }
-
- len += sprintf(p + len, "commands:\t"
- "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
-
- return len;
-}
-
-/* off, on, blink */
-static const int led_sled_arg1[] = { 0, 1, 3 };
-static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
-static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
-static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
-
-#define EC_HLCL 0x0c
-#define EC_HLBL 0x0d
-#define EC_HLMS 0x0e
-
-static int led_write(char *buf)
-{
- char *cmd;
- int led, ind, ret;
-
- if (!led_supported)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
- return -EINVAL;
-
- if (strstr(cmd, "off")) {
- ind = 0;
- } else if (strstr(cmd, "on")) {
- ind = 1;
- } else if (strstr(cmd, "blink")) {
- ind = 2;
- } else
- return -EINVAL;
-
- if (led_supported == IBMACPI_LED_570) {
- /* 570 */
- led = 1 << led;
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_sled_arg1[ind]))
- return -EIO;
- } else if (led_supported == IBMACPI_LED_OLD) {
- /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
- led = 1 << led;
- ret = ec_write(EC_HLMS, led);
- if (ret >= 0)
- ret =
- ec_write(EC_HLBL, led * led_exp_hlbl[ind]);
- if (ret >= 0)
- ret =
- ec_write(EC_HLCL, led * led_exp_hlcl[ind]);
- if (ret < 0)
- return ret;
- } else {
- /* all others */
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_led_arg1[ind]))
- return -EIO;
- }
- }
-
- return 0;
-}
-
-static int beep_read(char *p)
-{
- int len = 0;
-
- if (!beep_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else {
- len += sprintf(p + len, "status:\t\tsupported\n");
- len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
- }
-
- return len;
-}
-
-static int beep_write(char *buf)
-{
- char *cmd;
- int beep_cmd;
-
- if (!beep_handle)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
- beep_cmd >= 0 && beep_cmd <= 17) {
- /* beep_cmd set */
- } else
- return -EINVAL;
- if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
- return -EIO;
- }
-
- return 0;
-}
-
-static int acpi_ec_read(int i, u8 * p)
-{
- int v;
-
- if (ecrd_handle) {
- if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
- return 0;
- *p = v;
- } else {
- if (ec_read(i, p) < 0)
- return 0;
- }
-
- return 1;
-}
-
-static int acpi_ec_write(int i, u8 v)
-{
- if (ecwr_handle) {
- if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
- return 0;
- } else {
- if (ec_write(i, v) < 0)
- return 0;
- }
-
- return 1;
-}
-
-static enum thermal_access_mode thermal_read_mode;
-
-static int thermal_init(void)
-{
- u8 t, ta1, ta2;
- int i;
- int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
-
- if (ibm_thinkpad_ec_found && experimental) {
- /*
- * Direct EC access mode: sensors at registers
- * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
- * non-implemented, thermal sensors return 0x80 when
- * not available
- */
-
- ta1 = ta2 = 0;
- for (i = 0; i < 8; i++) {
- if (likely(acpi_ec_read(0x78 + i, &t))) {
- ta1 |= t;
- } else {
- ta1 = 0;
- break;
- }
- if (likely(acpi_ec_read(0xC0 + i, &t))) {
- ta2 |= t;
- } else {
- ta1 = 0;
- break;
- }
- }
- if (ta1 == 0) {
- /* This is sheer paranoia, but we handle it anyway */
- if (acpi_tmp7) {
- printk(IBM_ERR
- "ThinkPad ACPI EC access misbehaving, "
- "falling back to ACPI TMPx access mode\n");
- thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
- } else {
- printk(IBM_ERR
- "ThinkPad ACPI EC access misbehaving, "
- "disabling thermal sensors access\n");
- thermal_read_mode = IBMACPI_THERMAL_NONE;
- }
- } else {
- thermal_read_mode =
- (ta2 != 0) ?
- IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8;
- }
- } else if (acpi_tmp7) {
- if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
- /* 600e/x, 770e, 770x */
- thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT;
- } else {
- /* Standard ACPI TMPx access, max 8 sensors */
- thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
- }
- } else {
- /* temperatures not supported on 570, G4x, R30, R31, R32 */
- thermal_read_mode = IBMACPI_THERMAL_NONE;
- }
-
- return 0;
-}
-
-static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
-{
- int i, t;
- s8 tmp;
- char tmpi[] = "TMPi";
-
- if (!s)
- return -EINVAL;
-
- switch (thermal_read_mode) {
-#if IBMACPI_MAX_THERMAL_SENSORS >= 16
- case IBMACPI_THERMAL_TPEC_16:
- for (i = 0; i < 8; i++) {
- if (!acpi_ec_read(0xC0 + i, &tmp))
- return -EIO;
- s->temp[i + 8] = tmp * 1000;
- }
- /* fallthrough */
-#endif
- case IBMACPI_THERMAL_TPEC_8:
- for (i = 0; i < 8; i++) {
- if (!acpi_ec_read(0x78 + i, &tmp))
- return -EIO;
- s->temp[i] = tmp * 1000;
- }
- return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8;
-
- case IBMACPI_THERMAL_ACPI_UPDT:
- if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
- return -EIO;
- for (i = 0; i < 8; i++) {
- tmpi[3] = '0' + i;
- if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
- return -EIO;
- s->temp[i] = (t - 2732) * 100;
- }
- return 8;
-
- case IBMACPI_THERMAL_ACPI_TMP07:
- for (i = 0; i < 8; i++) {
- tmpi[3] = '0' + i;
- if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
- return -EIO;
- s->temp[i] = t * 1000;
- }
- return 8;
-
- case IBMACPI_THERMAL_NONE:
- default:
- return 0;
- }
-}
-
-static int thermal_read(char *p)
-{
- int len = 0;
- int n, i;
- struct ibm_thermal_sensors_struct t;
-
- n = thermal_get_sensors(&t);
- if (unlikely(n < 0))
- return n;
-
- len += sprintf(p + len, "temperatures:\t");
-
- if (n > 0) {
- for (i = 0; i < (n - 1); i++)
- len += sprintf(p + len, "%d ", t.temp[i] / 1000);
- len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
- } else
- len += sprintf(p + len, "not supported\n");
-
- return len;
-}
-
-static u8 ecdump_regs[256];
-
-static int ecdump_read(char *p)
-{
- int len = 0;
- int i, j;
- u8 v;
-
- len += sprintf(p + len, "EC "
- " +00 +01 +02 +03 +04 +05 +06 +07"
- " +08 +09 +0a +0b +0c +0d +0e +0f\n");
- for (i = 0; i < 256; i += 16) {
- len += sprintf(p + len, "EC 0x%02x:", i);
- for (j = 0; j < 16; j++) {
- if (!acpi_ec_read(i + j, &v))
- break;
- if (v != ecdump_regs[i + j])
- len += sprintf(p + len, " *%02x", v);
- else
- len += sprintf(p + len, " %02x", v);
- ecdump_regs[i + j] = v;
- }
- len += sprintf(p + len, "\n");
- if (j != 16)
- break;
- }
-
- /* These are way too dangerous to advertise openly... */
-#if 0
- len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
- " (<offset> is 00-ff, <value> is 00-ff)\n");
- len += sprintf(p + len, "commands:\t0x<offset> <value> "
- " (<offset> is 00-ff, <value> is 0-255)\n");
-#endif
- return len;
-}
-
-static int ecdump_write(char *buf)
-{
- char *cmd;
- int i, v;
-
- while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
- /* i and v set */
- } else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
- /* i and v set */
- } else
- return -EINVAL;
- if (i >= 0 && i < 256 && v >= 0 && v < 256) {
- if (!acpi_ec_write(i, v))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int brightness_offset = 0x31;
-
-static int brightness_get(struct backlight_device *bd)
-{
- u8 level;
- if (!acpi_ec_read(brightness_offset, &level))
- return -EIO;
-
- level &= 0x7;
-
- return level;
-}
-
-static int brightness_read(char *p)
-{
- int len = 0;
- int level;
-
- if ((level = brightness_get(NULL)) < 0) {
- len += sprintf(p + len, "level:\t\tunreadable\n");
- } else {
- len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
- len += sprintf(p + len, "commands:\tup, down\n");
- len += sprintf(p + len, "commands:\tlevel <level>"
- " (<level> is 0-7)\n");
- }
-
- return len;
-}
-
-#define BRIGHTNESS_UP 4
-#define BRIGHTNESS_DOWN 5
-
-static int brightness_set(int value)
-{
- int cmos_cmd, inc, i;
- int current_value = brightness_get(NULL);
-
- value &= 7;
-
- cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
- inc = value > current_value ? 1 : -1;
- for (i = current_value; i != value; i += inc) {
- if (!cmos_eval(cmos_cmd))
- return -EIO;
- if (!acpi_ec_write(brightness_offset, i + inc))
- return -EIO;
- }
-
- return 0;
-}
-
-static int brightness_write(char *buf)
-{
- int level;
- int new_level;
- char *cmd;
-
- while ((cmd = next_cmd(&buf))) {
- if ((level = brightness_get(NULL)) < 0)
- return level;
- level &= 7;
-
- if (strlencmp(cmd, "up") == 0) {
- new_level = level == 7 ? 7 : level + 1;
- } else if (strlencmp(cmd, "down") == 0) {
- new_level = level == 0 ? 0 : level - 1;
- } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
- new_level >= 0 && new_level <= 7) {
- /* new_level set */
- } else
- return -EINVAL;
-
- brightness_set(new_level);
- }
-
- return 0;
-}
-
-static int brightness_update_status(struct backlight_device *bd)
-{
- return brightness_set(
- (bd->props.fb_blank == FB_BLANK_UNBLANK &&
- bd->props.power == FB_BLANK_UNBLANK) ?
- bd->props.brightness : 0);
-}
-
-static struct backlight_ops ibm_backlight_data = {
- .get_brightness = brightness_get,
- .update_status = brightness_update_status,
-};
-
-static int brightness_init(void)
-{
- int b;
-
- b = brightness_get(NULL);
- if (b < 0)
- return b;
-
- ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
- &ibm_backlight_data);
- if (IS_ERR(ibm_backlight_device)) {
- printk(IBM_ERR "Could not register backlight device\n");
- return PTR_ERR(ibm_backlight_device);
- }
-
- ibm_backlight_device->props.max_brightness = 7;
- ibm_backlight_device->props.brightness = b;
- backlight_update_status(ibm_backlight_device);
-
- return 0;
-}
-
-static void brightness_exit(void)
-{
- if (ibm_backlight_device) {
- backlight_device_unregister(ibm_backlight_device);
- ibm_backlight_device = NULL;
- }
-}
-
-static int volume_offset = 0x30;
-
-static int volume_read(char *p)
-{
- int len = 0;
- u8 level;
-
- if (!acpi_ec_read(volume_offset, &level)) {
- len += sprintf(p + len, "level:\t\tunreadable\n");
- } else {
- len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
- len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
- len += sprintf(p + len, "commands:\tup, down, mute\n");
- len += sprintf(p + len, "commands:\tlevel <level>"
- " (<level> is 0-15)\n");
- }
-
- return len;
-}
-
-#define VOLUME_DOWN 0
-#define VOLUME_UP 1
-#define VOLUME_MUTE 2
-
-static int volume_write(char *buf)
-{
- int cmos_cmd, inc, i;
- u8 level, mute;
- int new_level, new_mute;
- char *cmd;
-
- while ((cmd = next_cmd(&buf))) {
- if (!acpi_ec_read(volume_offset, &level))
- return -EIO;
- new_mute = mute = level & 0x40;
- new_level = level = level & 0xf;
-
- if (strlencmp(cmd, "up") == 0) {
- if (mute)
- new_mute = 0;
- else
- new_level = level == 15 ? 15 : level + 1;
- } else if (strlencmp(cmd, "down") == 0) {
- if (mute)
- new_mute = 0;
- else
- new_level = level == 0 ? 0 : level - 1;
- } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
- new_level >= 0 && new_level <= 15) {
- /* new_level set */
- } else if (strlencmp(cmd, "mute") == 0) {
- new_mute = 0x40;
- } else
- return -EINVAL;
-
- if (new_level != level) { /* mute doesn't change */
- cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN;
- inc = new_level > level ? 1 : -1;
-
- if (mute && (!cmos_eval(cmos_cmd) ||
- !acpi_ec_write(volume_offset, level)))
- return -EIO;
-
- for (i = level; i != new_level; i += inc)
- if (!cmos_eval(cmos_cmd) ||
- !acpi_ec_write(volume_offset, i + inc))
- return -EIO;
-
- if (mute && (!cmos_eval(VOLUME_MUTE) ||
- !acpi_ec_write(volume_offset,
- new_level + mute)))
- return -EIO;
- }
-
- if (new_mute != mute) { /* level doesn't change */
- cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP;
-
- if (!cmos_eval(cmos_cmd) ||
- !acpi_ec_write(volume_offset, level + new_mute))
- return -EIO;
- }
- }
-
- return 0;
-}
-
-static enum fan_status_access_mode fan_status_access_mode;
-static enum fan_control_access_mode fan_control_access_mode;
-static enum fan_control_commands fan_control_commands;
-
-static int fan_control_status_known;
-static u8 fan_control_initial_status;
-
-static void fan_watchdog_fire(struct work_struct *ignored);
-static int fan_watchdog_maxinterval;
-static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
-
-static int fan_init(void)
-{
- fan_status_access_mode = IBMACPI_FAN_NONE;
- fan_control_access_mode = IBMACPI_FAN_WR_NONE;
- fan_control_commands = 0;
- fan_control_status_known = 1;
- fan_watchdog_maxinterval = 0;
-
- if (gfan_handle) {
- /* 570, 600e/x, 770e, 770x */
- fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN;
- } else {
- /* all other ThinkPads: note that even old-style
- * ThinkPad ECs supports the fan control register */
- if (likely(acpi_ec_read(fan_status_offset,
- &fan_control_initial_status))) {
- fan_status_access_mode = IBMACPI_FAN_RD_TPEC;
-
- /* In some ThinkPads, neither the EC nor the ACPI
- * DSDT initialize the fan status, and it ends up
- * being set to 0x07 when it *could* be either
- * 0x07 or 0x80.
- *
- * Enable for TP-1Y (T43), TP-78 (R51e),
- * TP-76 (R52), TP-70 (T43, R52), which are known
- * to be buggy. */
- if (fan_control_initial_status == 0x07 &&
- ibm_thinkpad_ec_found &&
- ((ibm_thinkpad_ec_found[0] == '1' &&
- ibm_thinkpad_ec_found[1] == 'Y') ||
- (ibm_thinkpad_ec_found[0] == '7' &&
- (ibm_thinkpad_ec_found[1] == '6' ||
- ibm_thinkpad_ec_found[1] == '8' ||
- ibm_thinkpad_ec_found[1] == '0'))
- )) {
- printk(IBM_NOTICE
- "fan_init: initial fan status is "
- "unknown, assuming it is in auto "
- "mode\n");
- fan_control_status_known = 0;
- }
- } else {
- printk(IBM_ERR
- "ThinkPad ACPI EC access misbehaving, "
- "fan status and control unavailable\n");
- return 0;
- }
- }
-
- if (sfan_handle) {
- /* 570, 770x-JL */
- fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN;
- fan_control_commands |=
- IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE;
- } else {
- if (!gfan_handle) {
- /* gfan without sfan means no fan control */
- /* all other models implement TP EC 0x2f control */
-
- if (fans_handle) {
- /* X31, X40, X41 */
- fan_control_access_mode =
- IBMACPI_FAN_WR_ACPI_FANS;
- fan_control_commands |=
- IBMACPI_FAN_CMD_SPEED |
- IBMACPI_FAN_CMD_LEVEL |
- IBMACPI_FAN_CMD_ENABLE;
- } else {
- fan_control_access_mode = IBMACPI_FAN_WR_TPEC;
- fan_control_commands |=
- IBMACPI_FAN_CMD_LEVEL |
- IBMACPI_FAN_CMD_ENABLE;
- }
- }
- }
-
- return 0;
-}
-
-static int fan_get_status(u8 *status)
-{
- u8 s;
-
- /* TODO:
- * Add IBMACPI_FAN_RD_ACPI_FANS ? */
-
- switch (fan_status_access_mode) {
- case IBMACPI_FAN_RD_ACPI_GFAN:
- /* 570, 600e/x, 770e, 770x */
-
- if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
- return -EIO;
-
- if (likely(status))
- *status = s & 0x07;
-
- break;
-
- case IBMACPI_FAN_RD_TPEC:
- /* all except 570, 600e/x, 770e, 770x */
- if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
- return -EIO;
-
- if (likely(status))
- *status = s;
-
- break;
-
- default:
- return -ENXIO;
- }
-
- return 0;
-}
-
-static int fan_get_speed(unsigned int *speed)
-{
- u8 hi, lo;
-
- switch (fan_status_access_mode) {
- case IBMACPI_FAN_RD_TPEC:
- /* all except 570, 600e/x, 770e, 770x */
- if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
- !acpi_ec_read(fan_rpm_offset + 1, &hi)))
- return -EIO;
-
- if (likely(speed))
- *speed = (hi << 8) | lo;
-
- break;
-
- default:
- return -ENXIO;
- }
-
- return 0;
-}
-
-static void fan_exit(void)
-{
- cancel_delayed_work(&fan_watchdog_task);
- flush_scheduled_work();
-}
-
-static void fan_watchdog_reset(void)
-{
- static int fan_watchdog_active = 0;
-
- if (fan_watchdog_active)
- cancel_delayed_work(&fan_watchdog_task);
-
- if (fan_watchdog_maxinterval > 0) {
- fan_watchdog_active = 1;
- if (!schedule_delayed_work(&fan_watchdog_task,
- msecs_to_jiffies(fan_watchdog_maxinterval
- * 1000))) {
- printk(IBM_ERR "failed to schedule the fan watchdog, "
- "watchdog will not trigger\n");
- }
- } else
- fan_watchdog_active = 0;
-}
-
-static int fan_read(char *p)
-{
- int len = 0;
- int rc;
- u8 status;
- unsigned int speed = 0;
-
- switch (fan_status_access_mode) {
- case IBMACPI_FAN_RD_ACPI_GFAN:
- /* 570, 600e/x, 770e, 770x */
- if ((rc = fan_get_status(&status)) < 0)
- return rc;
-
- len += sprintf(p + len, "status:\t\t%s\n"
- "level:\t\t%d\n",
- (status != 0) ? "enabled" : "disabled", status);
- break;
-
- case IBMACPI_FAN_RD_TPEC:
- /* all except 570, 600e/x, 770e, 770x */
- if ((rc = fan_get_status(&status)) < 0)
- return rc;
-
- if (unlikely(!fan_control_status_known)) {
- if (status != fan_control_initial_status)
- fan_control_status_known = 1;
- else
- /* Return most likely status. In fact, it
- * might be the only possible status */
- status = IBMACPI_FAN_EC_AUTO;
- }
-
- len += sprintf(p + len, "status:\t\t%s\n",
- (status != 0) ? "enabled" : "disabled");
-
- /* No ThinkPad boots on disengaged mode, we can safely
- * assume the tachometer is online if fan control status
- * was unknown */
- if ((rc = fan_get_speed(&speed)) < 0)
- return rc;
-
- len += sprintf(p + len, "speed:\t\t%d\n", speed);
-
- if (status & IBMACPI_FAN_EC_DISENGAGED)
- /* Disengaged mode takes precedence */
- len += sprintf(p + len, "level:\t\tdisengaged\n");
- else if (status & IBMACPI_FAN_EC_AUTO)
- len += sprintf(p + len, "level:\t\tauto\n");
- else
- len += sprintf(p + len, "level:\t\t%d\n", status);
- break;
-
- case IBMACPI_FAN_NONE:
- default:
- len += sprintf(p + len, "status:\t\tnot supported\n");
- }
-
- if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) {
- len += sprintf(p + len, "commands:\tlevel <level>");
-
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_SFAN:
- len += sprintf(p + len, " (<level> is 0-7)\n");
- break;
-
- default:
- len += sprintf(p + len, " (<level> is 0-7, "
- "auto, disengaged)\n");
- break;
- }
- }
-
- if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE)
- len += sprintf(p + len, "commands:\tenable, disable\n"
- "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
- "1-120 (seconds))\n");
-
- if (fan_control_commands & IBMACPI_FAN_CMD_SPEED)
- len += sprintf(p + len, "commands:\tspeed <speed>"
- " (<speed> is 0-65535)\n");
-
- return len;
-}
-
-static int fan_set_level(int level)
-{
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_SFAN:
- if (level >= 0 && level <= 7) {
- if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
- return -EIO;
- } else
- return -EINVAL;
- break;
-
- case IBMACPI_FAN_WR_ACPI_FANS:
- case IBMACPI_FAN_WR_TPEC:
- if ((level != IBMACPI_FAN_EC_AUTO) &&
- (level != IBMACPI_FAN_EC_DISENGAGED) &&
- ((level < 0) || (level > 7)))
- return -EINVAL;
-
- if (!acpi_ec_write(fan_status_offset, level))
- return -EIO;
- else
- fan_control_status_known = 1;
- break;
-
- default:
- return -ENXIO;
- }
- return 0;
-}
-
-static int fan_set_enable(void)
-{
- u8 s;
- int rc;
-
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_FANS:
- case IBMACPI_FAN_WR_TPEC:
- if ((rc = fan_get_status(&s)) < 0)
- return rc;
-
- /* Don't go out of emergency fan mode */
- if (s != 7)
- s = IBMACPI_FAN_EC_AUTO;
-
- if (!acpi_ec_write(fan_status_offset, s))
- return -EIO;
- else
- fan_control_status_known = 1;
- break;
-
- case IBMACPI_FAN_WR_ACPI_SFAN:
- if ((rc = fan_get_status(&s)) < 0)
- return rc;
-
- s &= 0x07;
-
- /* Set fan to at least level 4 */
- if (s < 4)
- s = 4;
-
- if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
- return -EIO;
- break;
-
- default:
- return -ENXIO;
- }
- return 0;
-}
-
-static int fan_set_disable(void)
-{
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_FANS:
- case IBMACPI_FAN_WR_TPEC:
- if (!acpi_ec_write(fan_status_offset, 0x00))
- return -EIO;
- else
- fan_control_status_known = 1;
- break;
-
- case IBMACPI_FAN_WR_ACPI_SFAN:
- if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
- return -EIO;
- break;
-
- default:
- return -ENXIO;
- }
- return 0;
-}
-
-static int fan_set_speed(int speed)
-{
- switch (fan_control_access_mode) {
- case IBMACPI_FAN_WR_ACPI_FANS:
- if (speed >= 0 && speed <= 65535) {
- if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
- speed, speed, speed))
- return -EIO;
- } else
- return -EINVAL;
- break;
-
- default:
- return -ENXIO;
- }
- return 0;
-}
-
-static int fan_write_cmd_level(const char *cmd, int *rc)
-{
- int level;
-
- if (strlencmp(cmd, "level auto") == 0)
- level = IBMACPI_FAN_EC_AUTO;
- else if (strlencmp(cmd, "level disengaged") == 0)
- level = IBMACPI_FAN_EC_DISENGAGED;
- else if (sscanf(cmd, "level %d", &level) != 1)
- return 0;
-
- if ((*rc = fan_set_level(level)) == -ENXIO)
- printk(IBM_ERR "level command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
-
- return 1;
-}
-
-static int fan_write_cmd_enable(const char *cmd, int *rc)
-{
- if (strlencmp(cmd, "enable") != 0)
- return 0;
-
- if ((*rc = fan_set_enable()) == -ENXIO)
- printk(IBM_ERR "enable command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
-
- return 1;
-}
-
-static int fan_write_cmd_disable(const char *cmd, int *rc)
-{
- if (strlencmp(cmd, "disable") != 0)
- return 0;
-
- if ((*rc = fan_set_disable()) == -ENXIO)
- printk(IBM_ERR "disable command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
-
- return 1;
-}
-
-static int fan_write_cmd_speed(const char *cmd, int *rc)
-{
- int speed;
-
- /* TODO:
- * Support speed <low> <medium> <high> ? */
-
- if (sscanf(cmd, "speed %d", &speed) != 1)
- return 0;
-
- if ((*rc = fan_set_speed(speed)) == -ENXIO)
- printk(IBM_ERR "speed command accepted for unsupported "
- "access mode %d", fan_control_access_mode);
-
- return 1;
-}
-
-static int fan_write_cmd_watchdog(const char *cmd, int *rc)
-{
- int interval;
-
- if (sscanf(cmd, "watchdog %d", &interval) != 1)
- return 0;
-
- if (interval < 0 || interval > 120)
- *rc = -EINVAL;
- else
- fan_watchdog_maxinterval = interval;
-
- return 1;
-}
-
-static int fan_write(char *buf)
-{
- char *cmd;
- int rc = 0;
-
- while (!rc && (cmd = next_cmd(&buf))) {
- if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) &&
- fan_write_cmd_level(cmd, &rc)) &&
- !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) &&
- (fan_write_cmd_enable(cmd, &rc) ||
- fan_write_cmd_disable(cmd, &rc) ||
- fan_write_cmd_watchdog(cmd, &rc))) &&
- !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) &&
- fan_write_cmd_speed(cmd, &rc))
- )
- rc = -EINVAL;
- else if (!rc)
- fan_watchdog_reset();
- }
-
- return rc;
-}
-
-static void fan_watchdog_fire(struct work_struct *ignored)
-{
- printk(IBM_NOTICE "fan watchdog: enabling fan\n");
- if (fan_set_enable()) {
- printk(IBM_ERR "fan watchdog: error while enabling fan\n");
- /* reschedule for later */
- fan_watchdog_reset();
- }
-}
-
-static struct ibm_struct ibms[] = {
- {
- .name = "driver",
- .init = ibm_acpi_driver_init,
- .read = driver_read,
- },
- {
- .name = "hotkey",
- .hid = IBM_HKEY_HID,
- .init = hotkey_init,
- .read = hotkey_read,
- .write = hotkey_write,
- .exit = hotkey_exit,
- .notify = hotkey_notify,
- .handle = &hkey_handle,
- .type = ACPI_DEVICE_NOTIFY,
- },
- {
- .name = "bluetooth",
- .init = bluetooth_init,
- .read = bluetooth_read,
- .write = bluetooth_write,
- },
- {
- .name = "wan",
- .init = wan_init,
- .read = wan_read,
- .write = wan_write,
- .experimental = 1,
- },
- {
- .name = "video",
- .init = video_init,
- .read = video_read,
- .write = video_write,
- .exit = video_exit,
- },
- {
- .name = "light",
- .init = light_init,
- .read = light_read,
- .write = light_write,
- },
-#ifdef CONFIG_ACPI_IBM_DOCK
- {
- .name = "dock",
- .read = dock_read,
- .write = dock_write,
- .notify = dock_notify,
- .handle = &dock_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
- {
- .name = "dock",
- .hid = IBM_PCI_HID,
- .notify = dock_notify,
- .handle = &pci_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
- {
- .name = "bay",
- .init = bay_init,
- .read = bay_read,
- .write = bay_write,
- .notify = bay_notify,
- .handle = &bay_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
-#endif /* CONFIG_ACPI_IBM_BAY */
- {
- .name = "cmos",
- .read = cmos_read,
- .write = cmos_write,
- },
- {
- .name = "led",
- .init = led_init,
- .read = led_read,
- .write = led_write,
- },
- {
- .name = "beep",
- .read = beep_read,
- .write = beep_write,
- },
- {
- .name = "thermal",
- .init = thermal_init,
- .read = thermal_read,
- },
- {
- .name = "ecdump",
- .read = ecdump_read,
- .write = ecdump_write,
- .experimental = 1,
- },
- {
- .name = "brightness",
- .read = brightness_read,
- .write = brightness_write,
- .init = brightness_init,
- .exit = brightness_exit,
- },
- {
- .name = "volume",
- .read = volume_read,
- .write = volume_write,
- },
- {
- .name = "fan",
- .read = fan_read,
- .write = fan_write,
- .init = fan_init,
- .exit = fan_exit,
- .experimental = 1,
- },
-};
-
-static int dispatch_read(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- struct ibm_struct *ibm = data;
- int len;
-
- if (!ibm || !ibm->read)
- return -EINVAL;
-
- len = ibm->read(page);
- if (len < 0)
- return len;
-
- if (len <= off + count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
-
- return len;
-}
-
-static int dispatch_write(struct file *file, const char __user * userbuf,
- unsigned long count, void *data)
-{
- struct ibm_struct *ibm = data;
- char *kernbuf;
- int ret;
-
- if (!ibm || !ibm->write)
- return -EINVAL;
-
- kernbuf = kmalloc(count + 2, GFP_KERNEL);
- if (!kernbuf)
- return -ENOMEM;
-
- if (copy_from_user(kernbuf, userbuf, count)) {
- kfree(kernbuf);
- return -EFAULT;
- }
-
- kernbuf[count] = 0;
- strcat(kernbuf, ",");
- ret = ibm->write(kernbuf);
- if (ret == 0)
- ret = count;
-
- kfree(kernbuf);
-
- return ret;
-}
-
-static void dispatch_notify(acpi_handle handle, u32 event, void *data)
-{
- struct ibm_struct *ibm = data;
-
- if (!ibm || !ibm->notify)
- return;
-
- ibm->notify(ibm, event);
-}
-
-static int __init setup_notify(struct ibm_struct *ibm)
-{
- acpi_status status;
- int ret;
-
- if (!*ibm->handle)
- return 0;
-
- ret = acpi_bus_get_device(*ibm->handle, &ibm->device);
- if (ret < 0) {
- printk(IBM_ERR "%s device not present\n", ibm->name);
- return 0;
- }
-
- acpi_driver_data(ibm->device) = ibm;
- sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name);
-
- status = acpi_install_notify_handler(*ibm->handle, ibm->type,
- dispatch_notify, ibm);
- if (ACPI_FAILURE(status)) {
- printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
- ibm->name, status);
- return -ENODEV;
- }
- ibm->notify_installed = 1;
- return 0;
-}
-
-static int __init ibm_device_add(struct acpi_device *device)
-{
- return 0;
-}
-
-static int __init register_driver(struct ibm_struct *ibm)
-{
- int ret;
-
- ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
- if (!ibm->driver) {
- printk(IBM_ERR "kmalloc(ibm->driver) failed\n");
- return -1;
- }
-
- sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name);
- ibm->driver->ids = ibm->hid;
- ibm->driver->ops.add = &ibm_device_add;
-
- ret = acpi_bus_register_driver(ibm->driver);
- if (ret < 0) {
- printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
- ibm->hid, ret);
- kfree(ibm->driver);
- }
-
- return ret;
-}
-
-static int __init ibm_init(struct ibm_struct *ibm)
-{
- int ret;
- struct proc_dir_entry *entry;
-
- if (ibm->experimental && !experimental)
- return 0;
-
- if (ibm->hid) {
- ret = register_driver(ibm);
- if (ret < 0)
- return ret;
- ibm->driver_registered = 1;
- }
-
- if (ibm->init) {
- ret = ibm->init();
- if (ret != 0)
- return ret;
- ibm->init_called = 1;
- }
-
- if (ibm->read) {
- entry = create_proc_entry(ibm->name,
- S_IFREG | S_IRUGO | S_IWUSR,
- proc_dir);
- if (!entry) {
- printk(IBM_ERR "unable to create proc entry %s\n",
- ibm->name);
- return -ENODEV;
- }
- entry->owner = THIS_MODULE;
- entry->data = ibm;
- entry->read_proc = &dispatch_read;
- if (ibm->write)
- entry->write_proc = &dispatch_write;
- ibm->proc_created = 1;
- }
-
- if (ibm->notify) {
- ret = setup_notify(ibm);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static void ibm_exit(struct ibm_struct *ibm)
-{
- if (ibm->notify_installed)
- acpi_remove_notify_handler(*ibm->handle, ibm->type,
- dispatch_notify);
-
- if (ibm->proc_created)
- remove_proc_entry(ibm->name, proc_dir);
-
- if (ibm->init_called && ibm->exit)
- ibm->exit();
-
- if (ibm->driver_registered) {
- acpi_bus_unregister_driver(ibm->driver);
- kfree(ibm->driver);
- }
-}
-
-static void __init ibm_handle_init(char *name,
- acpi_handle * handle, acpi_handle parent,
- char **paths, int num_paths, char **path)
-{
- int i;
- acpi_status status;
-
- for (i = 0; i < num_paths; i++) {
- status = acpi_get_handle(parent, paths[i], handle);
- if (ACPI_SUCCESS(status)) {
- *path = paths[i];
- return;
- }
- }
-
- *handle = NULL;
-}
-
-#define IBM_HANDLE_INIT(object) \
- ibm_handle_init(#object, &object##_handle, *object##_parent, \
- object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
-
-static int __init set_ibm_param(const char *val, struct kernel_param *kp)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(ibms); i++)
- if (strcmp(ibms[i].name, kp->name) == 0 && ibms[i].write) {
- if (strlen(val) > sizeof(ibms[i].param) - 2)
- return -ENOSPC;
- strcpy(ibms[i].param, val);
- strcat(ibms[i].param, ",");
- return 0;
- }
-
- return -EINVAL;
-}
-
-#define IBM_PARAM(feature) \
- module_param_call(feature, set_ibm_param, NULL, NULL, 0)
-
-IBM_PARAM(hotkey);
-IBM_PARAM(bluetooth);
-IBM_PARAM(video);
-IBM_PARAM(light);
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_PARAM(dock);
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_PARAM(bay);
-#endif /* CONFIG_ACPI_IBM_BAY */
-IBM_PARAM(cmos);
-IBM_PARAM(led);
-IBM_PARAM(beep);
-IBM_PARAM(ecdump);
-IBM_PARAM(brightness);
-IBM_PARAM(volume);
-IBM_PARAM(fan);
-
-static void acpi_ibm_exit(void)
-{
- int i;
-
- for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--)
- ibm_exit(&ibms[i]);
-
- if (proc_dir)
- remove_proc_entry(IBM_DIR, acpi_root_dir);
-
- if (ibm_thinkpad_ec_found)
- kfree(ibm_thinkpad_ec_found);
-}
-
-static char* __init check_dmi_for_ec(void)
-{
- struct dmi_device *dev = NULL;
- char ec_fw_string[18];
-
- /*
- * ThinkPad T23 or newer, A31 or newer, R50e or newer,
- * X32 or newer, all Z series; Some models must have an
- * up-to-date BIOS or they will not be detected.
- *
- * See http://thinkwiki.org/wiki/List_of_DMI_IDs
- */
- while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
- if (sscanf(dev->name,
- "IBM ThinkPad Embedded Controller -[%17c",
- ec_fw_string) == 1) {
- ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
- ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
- return kstrdup(ec_fw_string, GFP_KERNEL);
- }
- }
- return NULL;
-}
-
-static int __init acpi_ibm_init(void)
-{
- int ret, i;
-
- if (acpi_disabled)
- return -ENODEV;
-
- /* ec is required because many other handles are relative to it */
- IBM_HANDLE_INIT(ec);
- if (!ec_handle) {
- printk(IBM_ERR "ec object not found\n");
- return -ENODEV;
- }
-
- /* Models with newer firmware report the EC in DMI */
- ibm_thinkpad_ec_found = check_dmi_for_ec();
-
- /* these handles are not required */
- IBM_HANDLE_INIT(vid);
- IBM_HANDLE_INIT(vid2);
- IBM_HANDLE_INIT(ledb);
- IBM_HANDLE_INIT(led);
- IBM_HANDLE_INIT(hkey);
- IBM_HANDLE_INIT(lght);
- IBM_HANDLE_INIT(cmos);
-#ifdef CONFIG_ACPI_IBM_DOCK
- IBM_HANDLE_INIT(dock);
-#endif
- IBM_HANDLE_INIT(pci);
-#ifdef CONFIG_ACPI_IBM_BAY
- IBM_HANDLE_INIT(bay);
- if (bay_handle)
- IBM_HANDLE_INIT(bay_ej);
- IBM_HANDLE_INIT(bay2);
- if (bay2_handle)
- IBM_HANDLE_INIT(bay2_ej);
-#endif /* CONFIG_ACPI_IBM_BAY */
- IBM_HANDLE_INIT(beep);
- IBM_HANDLE_INIT(ecrd);
- IBM_HANDLE_INIT(ecwr);
- IBM_HANDLE_INIT(fans);
- IBM_HANDLE_INIT(gfan);
- IBM_HANDLE_INIT(sfan);
-
- proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir);
- if (!proc_dir) {
- printk(IBM_ERR "unable to create proc dir %s", IBM_DIR);
- acpi_ibm_exit();
- return -ENODEV;
- }
- proc_dir->owner = THIS_MODULE;
-
- for (i = 0; i < ARRAY_SIZE(ibms); i++) {
- ret = ibm_init(&ibms[i]);
- if (ret >= 0 && *ibms[i].param)
- ret = ibms[i].write(ibms[i].param);
- if (ret < 0) {
- acpi_ibm_exit();
- return ret;
- }
- }
-
- return 0;
-}
-
-module_init(acpi_ibm_init);
-module_exit(acpi_ibm_exit);
* Execute the method via the interpreter. The interpreter is locked
* here before calling into the AML parser
*/
- acpi_ex_enter_interpreter();
+ status = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
status = acpi_ps_execute_method(info);
acpi_ex_exit_interpreter();
} else {
* resolution, we must lock it because we could access an opregion.
* The opregion access code assumes that the interpreter is locked.
*/
- acpi_ex_enter_interpreter();
+ status = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
/* Function has a strange interface */
u32 level, void *context, void **return_value)
{
acpi_object_type type;
- acpi_status status = AE_OK;
+ acpi_status status;
struct acpi_init_walk_info *info =
(struct acpi_init_walk_info *)context;
struct acpi_namespace_node *node =
/*
* Must lock the interpreter before executing AML code
*/
- acpi_ex_enter_interpreter();
+ status = acpi_ex_enter_interpreter();
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
/*
* Each of these types can contain executable AML code within the
struct acpi_buffer *return_buffer)
{
acpi_status status;
+ acpi_status status2;
struct acpi_evaluate_info *info;
acpi_size buffer_space_needed;
u32 i;
* Delete the internal return object. NOTE: Interpreter must be
* locked to avoid race condition.
*/
- acpi_ex_enter_interpreter();
+ status2 = acpi_ex_enter_interpreter();
+ if (ACPI_SUCCESS(status2)) {
- /* Remove one reference on the return object (should delete it) */
+ /* Remove one reference on the return object (should delete it) */
- acpi_ut_remove_reference(info->return_object);
- acpi_ex_exit_interpreter();
+ acpi_ut_remove_reference(info->return_object);
+ acpi_ex_exit_interpreter();
+ }
}
cleanup:
#define ACPI_PROCESSOR_LIMIT_USER 0
#define ACPI_PROCESSOR_LIMIT_THERMAL 1
-#define ACPI_STA_PRESENT 0x00000001
-
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_core");
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
- if (ACPI_FAILURE(status) || !(sta & ACPI_STA_PRESENT)) {
+ if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) {
ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present"));
return 0;
}
#include <asm/apic.h>
#endif
-/*
- * Include the apic definitions for x86 to have the APIC timer related defines
- * available also for UP (on SMP it gets magically included via linux/smp.h).
- */
-#ifdef CONFIG_X86
-#include <asm/apic.h>
-#endif
-
#include <asm/io.h>
#include <asm/uaccess.h>
struct acpi_processor_cx *cx)
{
struct acpi_processor_power *pwr = &pr->power;
+ u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
/*
* Check, if one of the previous states already marked the lapic
if (pwr->timer_broadcast_on_state < state)
return;
- if (cx->type >= ACPI_STATE_C2)
+ if (cx->type >= type)
pr->power.timer_broadcast_on_state = state;
}
}
break;
default:
- STRUCT_TO_INT(device->status) = 0x0F;
+ STRUCT_TO_INT(device->status) =
+ ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
break;
}
{
struct list_head *node, *next;
- seq_printf(seq, "Device Sleep state Status\n");
+ seq_printf(seq, "Device\tS-state\t Status Sysfs node\n");
spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
+ struct device *ldev;
if (!dev->wakeup.flags.valid)
continue;
spin_unlock(&acpi_device_lock);
- seq_printf(seq, "%4s %4d %s%8s\n",
+
+ ldev = acpi_get_physical_device(dev->handle);
+ seq_printf(seq, "%s\t S%d\t%c%-8s ",
dev->pnp.bus_id,
(u32) dev->wakeup.sleep_state,
- dev->wakeup.flags.run_wake ? "*" : "",
+ dev->wakeup.flags.run_wake ? '*' : ' ',
dev->wakeup.state.enabled ? "enabled" : "disabled");
+ if (ldev)
+ seq_printf(seq, "%s:%s",
+ ldev->bus ? ldev->bus->name : "no-bus",
+ ldev->bus_id);
+ seq_printf(seq, "\n");
+ put_device(ldev);
+
spin_lock(&acpi_device_lock);
}
spin_unlock(&acpi_device_lock);
static struct acpi_table_desc initial_tables[ACPI_MAX_TABLES] __initdata;
-void acpi_table_print_madt_entry(struct acpi_subtable_header * header)
+static int acpi_apic_instance __initdata;
+
+void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
{
if (!header)
return;
if (!handler)
return -EINVAL;
- /* Locate the table (if exists). There should only be one. */
- acpi_get_table(id, 0, &table_header);
+ if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
+ acpi_get_table(id, acpi_apic_instance, &table_header);
+ else
+ acpi_get_table(id, 0, &table_header);
if (!table_header) {
printk(KERN_WARNING PREFIX "%4.4s not present\n", id);
int __init acpi_table_parse(char *id, acpi_table_handler handler)
{
struct acpi_table_header *table = NULL;
+
if (!handler)
return -EINVAL;
- acpi_get_table(id, 0, &table);
+ if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
+ acpi_get_table(id, acpi_apic_instance, &table);
+ else
+ acpi_get_table(id, 0, &table);
+
if (table) {
handler(table);
return 0;
return 1;
}
+/*
+ * The BIOS is supposed to supply a single APIC/MADT,
+ * but some report two. Provide a knob to use either.
+ * (don't you wish instance 0 and 1 were not the same?)
+ */
+static void __init check_multiple_madt(void)
+{
+ struct acpi_table_header *table = NULL;
+
+ acpi_get_table(ACPI_SIG_MADT, 2, &table);
+ if (table) {
+ printk(KERN_WARNING PREFIX
+ "BIOS bug: multiple APIC/MADT found,"
+ " using %d\n", acpi_apic_instance);
+ printk(KERN_WARNING PREFIX
+ "If \"acpi_apic_instance=%d\" works better, "
+ "notify linux-acpi@vger.kernel.org\n",
+ acpi_apic_instance ? 0 : 2);
+
+ } else
+ acpi_apic_instance = 0;
+
+ return;
+}
+
/*
* acpi_table_init()
*
* result: sdt_entry[] is initialized
*/
-
int __init acpi_table_init(void)
{
acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0);
+ check_multiple_madt();
+ return 0;
+}
+
+static int __init acpi_parse_apic_instance(char *str)
+{
+
+ acpi_apic_instance = simple_strtoul(str, NULL, 0);
+
+ printk(KERN_NOTICE PREFIX "Shall use APIC/MADT table %d\n",
+ acpi_apic_instance);
+
return 0;
}
+
+early_param("acpi_apic_instance", acpi_parse_apic_instance);
del_timer(&(tz->timer));
} else {
if (timer_pending(&(tz->timer)))
- mod_timer(&(tz->timer), (HZ * sleep_time) / 1000);
+ mod_timer(&(tz->timer),
+ jiffies + (HZ * sleep_time) / 1000);
else {
tz->timer.data = (unsigned long)tz;
tz->timer.function = acpi_thermal_run;
board_ahci_pi = 1,
board_ahci_vt8251 = 2,
board_ahci_ign_iferr = 3,
+ board_ahci_sb600 = 4,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
AHCI_FLAG_NO_NCQ = (1 << 24),
AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 25), /* ignore IRQ_IF_ERR */
AHCI_FLAG_HONOR_PI = (1 << 26), /* honor PORTS_IMPL */
+ AHCI_FLAG_IGN_SERR_INTERNAL = (1 << 27), /* ignore SERR_INTERNAL */
};
struct ahci_cmd_hdr {
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
},
+ /* board_ahci_sb600 */
+ {
+ .sht = &ahci_sht,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_SKIP_D2H_BSY |
+ AHCI_FLAG_IGN_SERR_INTERNAL,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &ahci_ops,
+ },
+
};
static const struct pci_device_id ahci_pci_tbl[] = {
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
/* ATI */
- { PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */
+ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 non-raid */
{ PCI_VDEVICE(ATI, 0x4381), board_ahci }, /* ATI SB600 raid */
/* VIA */
if (ap->flags & AHCI_FLAG_IGN_IRQ_IF_ERR)
irq_stat &= ~PORT_IRQ_IF_ERR;
- if (irq_stat & PORT_IRQ_TF_ERR)
+ if (irq_stat & PORT_IRQ_TF_ERR) {
err_mask |= AC_ERR_DEV;
+ if (ap->flags & AHCI_FLAG_IGN_SERR_INTERNAL)
+ serror &= ~SERR_INTERNAL;
+ }
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
err_mask |= AC_ERR_HOST_BUS;
*gtf_address = 0UL;
*obj_loc = 0UL;
- if (noacpi)
+ if (libata_noacpi)
return 0;
if (ata_msg_probe(ap))
ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
__FUNCTION__, ap->port_no);
- if (noacpi || !(ap->cbl == ATA_CBL_SATA))
+ if (libata_noacpi || !(ap->cbl == ATA_CBL_SATA))
return 0;
if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED))
unsigned long gtf_address;
unsigned long obj_loc;
- if (noacpi)
+ if (libata_noacpi)
return 0;
/*
* TBD - implement PATA support. For now,
struct acpi_object_list input;
union acpi_object in_params[1];
- if (noacpi)
+ if (libata_noacpi)
return 0;
if (ata_msg_probe(ap))
module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
-int noacpi;
-module_param(noacpi, int, 0444);
+int libata_noacpi = 1;
+module_param_named(noacpi, libata_noacpi, int, 0444);
MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set");
MODULE_AUTHOR("Jeff Garzik");
dev->max_sectors = ATA_MAX_SECTORS;
}
+ if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
+ dev->max_sectors = min(ATA_MAX_SECTORS_128, dev->max_sectors);
+
+ /* limit ATAPI DMA to R/W commands only */
+ if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY)
+ dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY;
+
if (ap->ops->dev_config)
ap->ops->dev_config(ap, dev);
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
+ /* Weird ATAPI devices */
+ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 |
+ ATA_HORKAGE_DMA_RW_ONLY },
+
/* Devices we expect to fail diagnostics */
/* Devices where NCQ should be avoided */
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
/* http://thread.gmane.org/gmane.linux.ide/14907 */
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
+ /* NCQ is broken */
+ { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
+ /* NCQ hard hangs device under heavier load, needs hard power cycle */
+ { "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ },
+ /* Blacklist entries taken from Silicon Image 3124/3132
+ Windows driver .inf file - also several Linux problem reports */
+ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
+ { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
+ { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
struct ata_port *ap = qc->ap;
int rc = 0; /* Assume ATAPI DMA is OK by default */
+ /* some drives can only do ATAPI DMA on read/write */
+ if (unlikely(qc->dev->horkage & ATA_HORKAGE_DMA_RW_ONLY)) {
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ u8 *scsicmd = cmd->cmnd;
+
+ switch (scsicmd[0]) {
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ /* atapi dma maybe ok */
+ break;
+ default:
+ /* turn off atapi dma */
+ return 1;
+ }
+ }
+
if (ap->ops->check_atapi_dma)
rc = ap->ops->check_atapi_dma(qc);
{
struct ata_port *ap = qc->ap;
- ap->ops->tf_read(ap, &qc->result_tf);
qc->result_tf.flags = qc->tf.flags;
+ ap->ops->tf_read(ap, &qc->result_tf);
}
/**
* RETURNS:
* 0 on success, AC_ERR_* mask on failure
*/
-static unsigned int atapi_eh_request_sense(struct ata_device *dev,
- unsigned char *sense_buf)
+static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
{
+ struct ata_device *dev = qc->dev;
+ unsigned char *sense_buf = qc->scsicmd->sense_buffer;
struct ata_port *ap = dev->ap;
struct ata_taskfile tf;
u8 cdb[ATAPI_CDB_LEN];
DPRINTK("ATAPI request sense\n");
- ata_tf_init(dev, &tf);
-
/* FIXME: is this needed? */
memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
- /* XXX: why tf_read here? */
- ap->ops->tf_read(ap, &tf);
-
- /* fill these in, for the case where they are -not- overwritten */
+ /* initialize sense_buf with the error register,
+ * for the case where they are -not- overwritten
+ */
sense_buf[0] = 0x70;
- sense_buf[2] = tf.feature >> 4;
+ sense_buf[2] = qc->result_tf.feature >> 4;
+
+ /* some devices time out if garbage left in tf */
+ ata_tf_init(dev, &tf);
memset(cdb, 0, ATAPI_CDB_LEN);
cdb[0] = REQUEST_SENSE;
case ATA_DEV_ATAPI:
if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
- tmp = atapi_eh_request_sense(qc->dev,
- qc->scsicmd->sense_buffer);
+ tmp = atapi_eh_request_sense(qc);
if (!tmp) {
/* ATA_QCFLAG_SENSE_VALID is used to
* tell atapi_qc_complete() that sense
{
struct ata_eh_context *ehc = &ap->eh_context;
struct ata_device *dev;
+ unsigned int new_mask = 0;
unsigned long flags;
int i, rc = 0;
DPRINTK("ENTER\n");
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ /* For PATA drive side cable detection to work, IDENTIFY must
+ * be done backwards such that PDIAG- is released by the slave
+ * device before the master device is identified.
+ */
+ for (i = ATA_MAX_DEVICES - 1; i >= 0; i--) {
unsigned int action, readid_flags = 0;
dev = &ap->device[i];
if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
- break;
+ goto err;
}
ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE);
rc = ata_dev_revalidate(dev, readid_flags);
if (rc)
- break;
+ goto err;
ata_eh_done(ap, dev, ATA_EH_REVALIDATE);
rc = ata_dev_read_id(dev, &dev->class, readid_flags,
dev->id);
- if (rc == 0) {
- ehc->i.flags |= ATA_EHI_PRINTINFO;
- rc = ata_dev_configure(dev);
- ehc->i.flags &= ~ATA_EHI_PRINTINFO;
- } else if (rc == -ENOENT) {
+ switch (rc) {
+ case 0:
+ new_mask |= 1 << i;
+ break;
+ case -ENOENT:
/* IDENTIFY was issued to non-existent
* device. No need to reset. Just
* thaw and kill the device.
*/
ata_eh_thaw_port(ap);
- dev->class = ATA_DEV_UNKNOWN;
- rc = 0;
- }
-
- if (rc) {
dev->class = ATA_DEV_UNKNOWN;
break;
+ default:
+ dev->class = ATA_DEV_UNKNOWN;
+ goto err;
}
+ }
+ }
- if (ata_dev_enabled(dev)) {
- spin_lock_irqsave(ap->lock, flags);
- ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
- spin_unlock_irqrestore(ap->lock, flags);
+ /* Configure new devices forward such that user doesn't see
+ * device detection messages backwards.
+ */
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
- /* new device discovered, configure xfermode */
- ehc->i.flags |= ATA_EHI_SETMODE;
- }
- }
+ if (!(new_mask & (1 << i)))
+ continue;
+
+ ehc->i.flags |= ATA_EHI_PRINTINFO;
+ rc = ata_dev_configure(dev);
+ ehc->i.flags &= ~ATA_EHI_PRINTINFO;
+ if (rc)
+ goto err;
+
+ spin_lock_irqsave(ap->lock, flags);
+ ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* new device discovered, configure xfermode */
+ ehc->i.flags |= ATA_EHI_SETMODE;
}
- if (rc)
- *r_failed_dev = dev;
+ return 0;
- DPRINTK("EXIT\n");
+ err:
+ *r_failed_dev = dev;
+ DPRINTK("EXIT rc=%d\n", rc);
return rc;
}
scsi_cmd[8] = args[3];
scsi_cmd[10] = args[4];
scsi_cmd[12] = args[5];
- scsi_cmd[13] = args[6] & 0x0f;
+ scsi_cmd[13] = args[6] & 0x4f;
scsi_cmd[14] = args[0];
/* Good values for timeout and retries? Values below
extern int atapi_enabled;
extern int atapi_dmadir;
extern int libata_fua;
-extern int noacpi;
+extern int libata_noacpi;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
/* Cases the state machine will not complete correctly without help */
if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA)
{
- len = qc->nbytes;
+ len = qc->nbytes / 2;
if (tf->flags & ATA_TFLAG_WRITE)
len |= 0x06000000;
struct ata_port_info *port;
struct pci_dev *host = NULL;
struct sis_chipset *chipset = NULL;
+ struct sis_chipset *sets;
static struct sis_chipset sis_chipsets[] = {
/* We have to find the bridge first */
- for (chipset = &sis_chipsets[0]; chipset->device; chipset++) {
- host = pci_get_device(PCI_VENDOR_ID_SI, chipset->device, NULL);
+ for (sets = &sis_chipsets[0]; sets->device; sets++) {
+ host = pci_get_device(PCI_VENDOR_ID_SI, sets->device, NULL);
if (host != NULL) {
- if (chipset->device == 0x630) { /* SIS630 */
+ chipset = sets; /* Match found */
+ if (sets->device == 0x630) { /* SIS630 */
u8 host_rev;
pci_read_config_byte(host, PCI_REVISION_ID, &host_rev);
if (host_rev >= 0x30) /* 630 ET */
}
/* Look for concealed bridges */
- if (host == NULL) {
+ if (chipset == NULL) {
/* Second check */
u32 idemisc;
u16 trueid;
int (*platform_notify)(struct device * dev) = NULL;
int (*platform_notify_remove)(struct device * dev) = NULL;
-/*
- * Detect the LANANA-assigned LOCAL/EXPERIMENTAL majors
- */
-bool is_lanana_major(unsigned int major)
-{
- if (major >= 60 && major <= 63)
- return 1;
- if (major >= 120 && major <= 127)
- return 1;
- if (major >= 240 && major <= 254)
- return 1;
- return 0;
-}
-
/*
* sysfs bindings for devices.
*/
void driver_unregister(struct device_driver * drv)
{
bus_remove_driver(drv);
- wait_for_completion(&drv->unloaded);
+ /*
+ * If the driver is a module, we are probably in
+ * the module unload path, and we want to wait
+ * for everything to unload before we can actually
+ * finish the unload.
+ */
+ if (drv->owner)
+ wait_for_completion(&drv->unloaded);
}
/**
int error;
pr_debug("PM: Adding info for %s:%s\n",
- dev->bus ? dev->bus->name : "No Bus", dev->kobj.name);
+ dev->bus ? dev->bus->name : "No Bus",
+ kobject_name(&dev->kobj));
down(&dpm_list_sem);
list_add_tail(&dev->power.entry, &dpm_active);
device_pm_set_parent(dev, dev->parent);
void device_pm_remove(struct device * dev)
{
pr_debug("PM: Removing info for %s:%s\n",
- dev->bus ? dev->bus->name : "No Bus", dev->kobj.name);
+ dev->bus ? dev->bus->name : "No Bus",
+ kobject_name(&dev->kobj));
down(&dpm_list_sem);
dpm_sysfs_remove(dev);
put_device(dev->power.pm_parent);
"does not support reading geometry\n");
drv->heads = 255;
drv->sectors = 32; // Sectors per track
+ drv->cylinders = total_size + 1;
drv->raid_level = RAID_UNKNOWN;
} else {
drv->heads = inq_buff->data_byte[6];
"already be removed \n");
return;
}
+
+ remove_proc_entry(hba[i]->devname, proc_cciss);
+ unregister_blkdev(hba[i]->major, hba[i]->devname);
+
+ /* remove it from the disk list */
+ for (j = 0; j < CISS_MAX_LUN; j++) {
+ struct gendisk *disk = hba[i]->gendisk[j];
+ if (disk) {
+ request_queue_t *q = disk->queue;
+
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (q)
+ blk_cleanup_queue(q);
+ }
+ }
+
+ cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
+
/* Turn board interrupts off and send the flush cache command */
/* sendcmd will turn off interrupt, and send the flush...
* To write all data in the battery backed cache to disks */
#endif /* CONFIG_PCI_MSI */
iounmap(hba[i]->vaddr);
- cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
- unregister_blkdev(hba[i]->major, hba[i]->devname);
- remove_proc_entry(hba[i]->devname, proc_cciss);
-
- /* remove it from the disk list */
- for (j = 0; j < CISS_MAX_LUN; j++) {
- struct gendisk *disk = hba[i]->gendisk[j];
- if (disk) {
- request_queue_t *q = disk->queue;
-
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- if (q)
- blk_cleanup_queue(q);
- }
- }
pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
#include <linux/blkdev.h>
#include <asm/uaccess.h>
-static spinlock_t pcd_lock;
+static DEFINE_SPINLOCK(pcd_lock);
module_param(verbose, bool, 0644);
module_param(major, int, 0);
#include <linux/blkpg.h>
#include <asm/uaccess.h>
-static spinlock_t pf_spin_lock;
+static DEFINE_SPINLOCK(pf_spin_lock);
module_param(verbose, bool, 0644);
module_param(major, int, 0);
rq->cmd_flags |= REQ_QUIET;
blk_execute_rq(rq->q, pd->bdev->bd_disk, rq, 0);
- ret = rq->errors;
+ if (rq->errors)
+ ret = -EIO;
out:
blk_put_request(rq);
return ret;
If you have an Alchemy AU1000 processor (MIPS based) and you want
to use a console on a serial port, say Y. Otherwise, say N.
+config SERIAL_DEC
+ bool "DECstation serial support"
+ depends on MACH_DECSTATION
+ default y
+ help
+ This selects whether you want to be asked about drivers for
+ DECstation serial ports.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about DECstation serial ports.
+
+config SERIAL_DEC_CONSOLE
+ bool "Support for console on a DECstation serial port"
+ depends on SERIAL_DEC
+ default y
+ help
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). Note that the firmware uses ttyS0 as the serial console on
+ the Maxine and ttyS2 on the others.
+
+ If unsure, say Y.
+
+config ZS
+ bool "Z85C30 Serial Support"
+ depends on SERIAL_DEC
+ default y
+ help
+ Documentation on the Zilog 85C350 serial communications controller
+ is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>
+
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
#define PCI_DEVICE_ID_INTEL_82965Q_IG 0x2992
#define PCI_DEVICE_ID_INTEL_82965G_HB 0x29A0
#define PCI_DEVICE_ID_INTEL_82965G_IG 0x29A2
+#define PCI_DEVICE_ID_INTEL_82965GM_HB 0x2A00
+#define PCI_DEVICE_ID_INTEL_82965GM_IG 0x2A02
#define IS_I965 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82946GZ_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_1_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965Q_HB || \
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GM_HB)
extern int agp_memory_reserved;
if (IS_I965) {
u32 pgetbl_ctl;
+ pgetbl_ctl = readl(intel_i830_private.registers+I810_PGETBL_CTL);
- pci_read_config_dword(agp_bridge->dev, I810_PGETBL_CTL,
- &pgetbl_ctl);
/* The 965 has a field telling us the size of the GTT,
* which may be larger than what is necessary to map the
* aperture.
bridge->driver = &intel_845_driver;
name = "965G";
break;
-
+ case PCI_DEVICE_ID_INTEL_82965GM_HB:
+ if (find_i830(PCI_DEVICE_ID_INTEL_82965GM_IG))
+ bridge->driver = &intel_i965_driver;
+ else
+ bridge->driver = &intel_845_driver;
+ name = "965GM";
+ break;
case PCI_DEVICE_ID_INTEL_7505_0:
bridge->driver = &intel_7505_driver;
name = "E7505";
ID(PCI_DEVICE_ID_INTEL_82965G_1_HB),
ID(PCI_DEVICE_ID_INTEL_82965Q_HB),
ID(PCI_DEVICE_ID_INTEL_82965G_HB),
+ ID(PCI_DEVICE_ID_INTEL_82965GM_HB),
{ }
};
i830-objs := i830_drv.o i830_dma.o i830_irq.o
i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o
radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o
-ffb-objs := ffb_drv.o ffb_context.o
sis-objs := sis_drv.o sis_mm.o
savage-objs := savage_drv.o savage_bci.o savage_state.o
via-objs := via_irq.o via_drv.o via_map.o via_mm.o via_dma.o via_verifier.o via_video.o via_dmablit.o
obj-$(CONFIG_DRM_I810) += i810.o
obj-$(CONFIG_DRM_I830) += i830.o
obj-$(CONFIG_DRM_I915) += i915.o
-obj-$(CONFIG_DRM_FFB) += ffb.o
obj-$(CONFIG_DRM_SIS) += sis.o
obj-$(CONFIG_DRM_SAVAGE)+= savage.o
obj-$(CONFIG_DRM_VIA) +=via.o
+++ /dev/null
-/* $Id: ffb_context.c,v 1.5 2001/08/09 17:47:51 davem Exp $
- * ffb_context.c: Creator/Creator3D DRI/DRM context switching.
- *
- * Copyright (C) 2000 David S. Miller (davem@redhat.com)
- *
- * Almost entirely stolen from tdfx_context.c, see there
- * for authors.
- */
-
-#include <asm/upa.h>
-
-#include "ffb.h"
-#include "drmP.h"
-
-#include "ffb_drv.h"
-
-static int DRM(alloc_queue) (drm_device_t * dev, int is_2d_only) {
- ffb_dev_priv_t *fpriv = (ffb_dev_priv_t *) dev->dev_private;
- int i;
-
- for (i = 0; i < FFB_MAX_CTXS; i++) {
- if (fpriv->hw_state[i] == NULL)
- break;
- }
- if (i == FFB_MAX_CTXS)
- return -1;
-
- fpriv->hw_state[i] = kmalloc(sizeof(struct ffb_hw_context), GFP_KERNEL);
- if (fpriv->hw_state[i] == NULL)
- return -1;
-
- fpriv->hw_state[i]->is_2d_only = is_2d_only;
-
- /* Plus one because 0 is the special DRM_KERNEL_CONTEXT. */
- return i + 1;
-}
-
-static void ffb_save_context(ffb_dev_priv_t * fpriv, int idx)
-{
- ffb_fbcPtr ffb = fpriv->regs;
- struct ffb_hw_context *ctx;
- int i;
-
- ctx = fpriv->hw_state[idx - 1];
- if (idx == 0 || ctx == NULL)
- return;
-
- if (ctx->is_2d_only) {
- /* 2D applications only care about certain pieces
- * of state.
- */
- ctx->drawop = upa_readl(&ffb->drawop);
- ctx->ppc = upa_readl(&ffb->ppc);
- ctx->wid = upa_readl(&ffb->wid);
- ctx->fg = upa_readl(&ffb->fg);
- ctx->bg = upa_readl(&ffb->bg);
- ctx->xclip = upa_readl(&ffb->xclip);
- ctx->fbc = upa_readl(&ffb->fbc);
- ctx->rop = upa_readl(&ffb->rop);
- ctx->cmp = upa_readl(&ffb->cmp);
- ctx->matchab = upa_readl(&ffb->matchab);
- ctx->magnab = upa_readl(&ffb->magnab);
- ctx->pmask = upa_readl(&ffb->pmask);
- ctx->xpmask = upa_readl(&ffb->xpmask);
- ctx->lpat = upa_readl(&ffb->lpat);
- ctx->fontxy = upa_readl(&ffb->fontxy);
- ctx->fontw = upa_readl(&ffb->fontw);
- ctx->fontinc = upa_readl(&ffb->fontinc);
-
- /* stencil/stencilctl only exists on FFB2+ and later
- * due to the introduction of 3DRAM-III.
- */
- if (fpriv->ffb_type == ffb2_vertical_plus ||
- fpriv->ffb_type == ffb2_horizontal_plus) {
- ctx->stencil = upa_readl(&ffb->stencil);
- ctx->stencilctl = upa_readl(&ffb->stencilctl);
- }
-
- for (i = 0; i < 32; i++)
- ctx->area_pattern[i] = upa_readl(&ffb->pattern[i]);
- ctx->ucsr = upa_readl(&ffb->ucsr);
- return;
- }
-
- /* Fetch drawop. */
- ctx->drawop = upa_readl(&ffb->drawop);
-
- /* If we were saving the vertex registers, this is where
- * we would do it. We would save 32 32-bit words starting
- * at ffb->suvtx.
- */
-
- /* Capture rendering attributes. */
-
- ctx->ppc = upa_readl(&ffb->ppc); /* Pixel Processor Control */
- ctx->wid = upa_readl(&ffb->wid); /* Current WID */
- ctx->fg = upa_readl(&ffb->fg); /* Constant FG color */
- ctx->bg = upa_readl(&ffb->bg); /* Constant BG color */
- ctx->consty = upa_readl(&ffb->consty); /* Constant Y */
- ctx->constz = upa_readl(&ffb->constz); /* Constant Z */
- ctx->xclip = upa_readl(&ffb->xclip); /* X plane clip */
- ctx->dcss = upa_readl(&ffb->dcss); /* Depth Cue Scale Slope */
- ctx->vclipmin = upa_readl(&ffb->vclipmin); /* Primary XY clip, minimum */
- ctx->vclipmax = upa_readl(&ffb->vclipmax); /* Primary XY clip, maximum */
- ctx->vclipzmin = upa_readl(&ffb->vclipzmin); /* Primary Z clip, minimum */
- ctx->vclipzmax = upa_readl(&ffb->vclipzmax); /* Primary Z clip, maximum */
- ctx->dcsf = upa_readl(&ffb->dcsf); /* Depth Cue Scale Front Bound */
- ctx->dcsb = upa_readl(&ffb->dcsb); /* Depth Cue Scale Back Bound */
- ctx->dczf = upa_readl(&ffb->dczf); /* Depth Cue Scale Z Front */
- ctx->dczb = upa_readl(&ffb->dczb); /* Depth Cue Scale Z Back */
- ctx->blendc = upa_readl(&ffb->blendc); /* Alpha Blend Control */
- ctx->blendc1 = upa_readl(&ffb->blendc1); /* Alpha Blend Color 1 */
- ctx->blendc2 = upa_readl(&ffb->blendc2); /* Alpha Blend Color 2 */
- ctx->fbc = upa_readl(&ffb->fbc); /* Frame Buffer Control */
- ctx->rop = upa_readl(&ffb->rop); /* Raster Operation */
- ctx->cmp = upa_readl(&ffb->cmp); /* Compare Controls */
- ctx->matchab = upa_readl(&ffb->matchab); /* Buffer A/B Match Ops */
- ctx->matchc = upa_readl(&ffb->matchc); /* Buffer C Match Ops */
- ctx->magnab = upa_readl(&ffb->magnab); /* Buffer A/B Magnitude Ops */
- ctx->magnc = upa_readl(&ffb->magnc); /* Buffer C Magnitude Ops */
- ctx->pmask = upa_readl(&ffb->pmask); /* RGB Plane Mask */
- ctx->xpmask = upa_readl(&ffb->xpmask); /* X Plane Mask */
- ctx->ypmask = upa_readl(&ffb->ypmask); /* Y Plane Mask */
- ctx->zpmask = upa_readl(&ffb->zpmask); /* Z Plane Mask */
-
- /* Auxiliary Clips. */
- ctx->auxclip0min = upa_readl(&ffb->auxclip[0].min);
- ctx->auxclip0max = upa_readl(&ffb->auxclip[0].max);
- ctx->auxclip1min = upa_readl(&ffb->auxclip[1].min);
- ctx->auxclip1max = upa_readl(&ffb->auxclip[1].max);
- ctx->auxclip2min = upa_readl(&ffb->auxclip[2].min);
- ctx->auxclip2max = upa_readl(&ffb->auxclip[2].max);
- ctx->auxclip3min = upa_readl(&ffb->auxclip[3].min);
- ctx->auxclip3max = upa_readl(&ffb->auxclip[3].max);
-
- ctx->lpat = upa_readl(&ffb->lpat); /* Line Pattern */
- ctx->fontxy = upa_readl(&ffb->fontxy); /* XY Font Coordinate */
- ctx->fontw = upa_readl(&ffb->fontw); /* Font Width */
- ctx->fontinc = upa_readl(&ffb->fontinc); /* Font X/Y Increment */
-
- /* These registers/features only exist on FFB2 and later chips. */
- if (fpriv->ffb_type >= ffb2_prototype) {
- ctx->dcss1 = upa_readl(&ffb->dcss1); /* Depth Cue Scale Slope 1 */
- ctx->dcss2 = upa_readl(&ffb->dcss2); /* Depth Cue Scale Slope 2 */
- ctx->dcss2 = upa_readl(&ffb->dcss3); /* Depth Cue Scale Slope 3 */
- ctx->dcs2 = upa_readl(&ffb->dcs2); /* Depth Cue Scale 2 */
- ctx->dcs3 = upa_readl(&ffb->dcs3); /* Depth Cue Scale 3 */
- ctx->dcs4 = upa_readl(&ffb->dcs4); /* Depth Cue Scale 4 */
- ctx->dcd2 = upa_readl(&ffb->dcd2); /* Depth Cue Depth 2 */
- ctx->dcd3 = upa_readl(&ffb->dcd3); /* Depth Cue Depth 3 */
- ctx->dcd4 = upa_readl(&ffb->dcd4); /* Depth Cue Depth 4 */
-
- /* And stencil/stencilctl only exists on FFB2+ and later
- * due to the introduction of 3DRAM-III.
- */
- if (fpriv->ffb_type == ffb2_vertical_plus ||
- fpriv->ffb_type == ffb2_horizontal_plus) {
- ctx->stencil = upa_readl(&ffb->stencil);
- ctx->stencilctl = upa_readl(&ffb->stencilctl);
- }
- }
-
- /* Save the 32x32 area pattern. */
- for (i = 0; i < 32; i++)
- ctx->area_pattern[i] = upa_readl(&ffb->pattern[i]);
-
- /* Finally, stash away the User Constol/Status Register. */
- ctx->ucsr = upa_readl(&ffb->ucsr);
-}
-
-static void ffb_restore_context(ffb_dev_priv_t * fpriv, int old, int idx)
-{
- ffb_fbcPtr ffb = fpriv->regs;
- struct ffb_hw_context *ctx;
- int i;
-
- ctx = fpriv->hw_state[idx - 1];
- if (idx == 0 || ctx == NULL)
- return;
-
- if (ctx->is_2d_only) {
- /* 2D applications only care about certain pieces
- * of state.
- */
- upa_writel(ctx->drawop, &ffb->drawop);
-
- /* If we were restoring the vertex registers, this is where
- * we would do it. We would restore 32 32-bit words starting
- * at ffb->suvtx.
- */
-
- upa_writel(ctx->ppc, &ffb->ppc);
- upa_writel(ctx->wid, &ffb->wid);
- upa_writel(ctx->fg, &ffb->fg);
- upa_writel(ctx->bg, &ffb->bg);
- upa_writel(ctx->xclip, &ffb->xclip);
- upa_writel(ctx->fbc, &ffb->fbc);
- upa_writel(ctx->rop, &ffb->rop);
- upa_writel(ctx->cmp, &ffb->cmp);
- upa_writel(ctx->matchab, &ffb->matchab);
- upa_writel(ctx->magnab, &ffb->magnab);
- upa_writel(ctx->pmask, &ffb->pmask);
- upa_writel(ctx->xpmask, &ffb->xpmask);
- upa_writel(ctx->lpat, &ffb->lpat);
- upa_writel(ctx->fontxy, &ffb->fontxy);
- upa_writel(ctx->fontw, &ffb->fontw);
- upa_writel(ctx->fontinc, &ffb->fontinc);
-
- /* stencil/stencilctl only exists on FFB2+ and later
- * due to the introduction of 3DRAM-III.
- */
- if (fpriv->ffb_type == ffb2_vertical_plus ||
- fpriv->ffb_type == ffb2_horizontal_plus) {
- upa_writel(ctx->stencil, &ffb->stencil);
- upa_writel(ctx->stencilctl, &ffb->stencilctl);
- upa_writel(0x80000000, &ffb->fbc);
- upa_writel((ctx->stencilctl | 0x80000),
- &ffb->rawstencilctl);
- upa_writel(ctx->fbc, &ffb->fbc);
- }
-
- for (i = 0; i < 32; i++)
- upa_writel(ctx->area_pattern[i], &ffb->pattern[i]);
- upa_writel((ctx->ucsr & 0xf0000), &ffb->ucsr);
- return;
- }
-
- /* Restore drawop. */
- upa_writel(ctx->drawop, &ffb->drawop);
-
- /* If we were restoring the vertex registers, this is where
- * we would do it. We would restore 32 32-bit words starting
- * at ffb->suvtx.
- */
-
- /* Restore rendering attributes. */
-
- upa_writel(ctx->ppc, &ffb->ppc); /* Pixel Processor Control */
- upa_writel(ctx->wid, &ffb->wid); /* Current WID */
- upa_writel(ctx->fg, &ffb->fg); /* Constant FG color */
- upa_writel(ctx->bg, &ffb->bg); /* Constant BG color */
- upa_writel(ctx->consty, &ffb->consty); /* Constant Y */
- upa_writel(ctx->constz, &ffb->constz); /* Constant Z */
- upa_writel(ctx->xclip, &ffb->xclip); /* X plane clip */
- upa_writel(ctx->dcss, &ffb->dcss); /* Depth Cue Scale Slope */
- upa_writel(ctx->vclipmin, &ffb->vclipmin); /* Primary XY clip, minimum */
- upa_writel(ctx->vclipmax, &ffb->vclipmax); /* Primary XY clip, maximum */
- upa_writel(ctx->vclipzmin, &ffb->vclipzmin); /* Primary Z clip, minimum */
- upa_writel(ctx->vclipzmax, &ffb->vclipzmax); /* Primary Z clip, maximum */
- upa_writel(ctx->dcsf, &ffb->dcsf); /* Depth Cue Scale Front Bound */
- upa_writel(ctx->dcsb, &ffb->dcsb); /* Depth Cue Scale Back Bound */
- upa_writel(ctx->dczf, &ffb->dczf); /* Depth Cue Scale Z Front */
- upa_writel(ctx->dczb, &ffb->dczb); /* Depth Cue Scale Z Back */
- upa_writel(ctx->blendc, &ffb->blendc); /* Alpha Blend Control */
- upa_writel(ctx->blendc1, &ffb->blendc1); /* Alpha Blend Color 1 */
- upa_writel(ctx->blendc2, &ffb->blendc2); /* Alpha Blend Color 2 */
- upa_writel(ctx->fbc, &ffb->fbc); /* Frame Buffer Control */
- upa_writel(ctx->rop, &ffb->rop); /* Raster Operation */
- upa_writel(ctx->cmp, &ffb->cmp); /* Compare Controls */
- upa_writel(ctx->matchab, &ffb->matchab); /* Buffer A/B Match Ops */
- upa_writel(ctx->matchc, &ffb->matchc); /* Buffer C Match Ops */
- upa_writel(ctx->magnab, &ffb->magnab); /* Buffer A/B Magnitude Ops */
- upa_writel(ctx->magnc, &ffb->magnc); /* Buffer C Magnitude Ops */
- upa_writel(ctx->pmask, &ffb->pmask); /* RGB Plane Mask */
- upa_writel(ctx->xpmask, &ffb->xpmask); /* X Plane Mask */
- upa_writel(ctx->ypmask, &ffb->ypmask); /* Y Plane Mask */
- upa_writel(ctx->zpmask, &ffb->zpmask); /* Z Plane Mask */
-
- /* Auxiliary Clips. */
- upa_writel(ctx->auxclip0min, &ffb->auxclip[0].min);
- upa_writel(ctx->auxclip0max, &ffb->auxclip[0].max);
- upa_writel(ctx->auxclip1min, &ffb->auxclip[1].min);
- upa_writel(ctx->auxclip1max, &ffb->auxclip[1].max);
- upa_writel(ctx->auxclip2min, &ffb->auxclip[2].min);
- upa_writel(ctx->auxclip2max, &ffb->auxclip[2].max);
- upa_writel(ctx->auxclip3min, &ffb->auxclip[3].min);
- upa_writel(ctx->auxclip3max, &ffb->auxclip[3].max);
-
- upa_writel(ctx->lpat, &ffb->lpat); /* Line Pattern */
- upa_writel(ctx->fontxy, &ffb->fontxy); /* XY Font Coordinate */
- upa_writel(ctx->fontw, &ffb->fontw); /* Font Width */
- upa_writel(ctx->fontinc, &ffb->fontinc); /* Font X/Y Increment */
-
- /* These registers/features only exist on FFB2 and later chips. */
- if (fpriv->ffb_type >= ffb2_prototype) {
- upa_writel(ctx->dcss1, &ffb->dcss1); /* Depth Cue Scale Slope 1 */
- upa_writel(ctx->dcss2, &ffb->dcss2); /* Depth Cue Scale Slope 2 */
- upa_writel(ctx->dcss3, &ffb->dcss2); /* Depth Cue Scale Slope 3 */
- upa_writel(ctx->dcs2, &ffb->dcs2); /* Depth Cue Scale 2 */
- upa_writel(ctx->dcs3, &ffb->dcs3); /* Depth Cue Scale 3 */
- upa_writel(ctx->dcs4, &ffb->dcs4); /* Depth Cue Scale 4 */
- upa_writel(ctx->dcd2, &ffb->dcd2); /* Depth Cue Depth 2 */
- upa_writel(ctx->dcd3, &ffb->dcd3); /* Depth Cue Depth 3 */
- upa_writel(ctx->dcd4, &ffb->dcd4); /* Depth Cue Depth 4 */
-
- /* And stencil/stencilctl only exists on FFB2+ and later
- * due to the introduction of 3DRAM-III.
- */
- if (fpriv->ffb_type == ffb2_vertical_plus ||
- fpriv->ffb_type == ffb2_horizontal_plus) {
- /* Unfortunately, there is a hardware bug on
- * the FFB2+ chips which prevents a normal write
- * to the stencil control register from working
- * as it should.
- *
- * The state controlled by the FFB stencilctl register
- * really gets transferred to the per-buffer instances
- * of the stencilctl register in the 3DRAM chips.
- *
- * The bug is that FFB does not update buffer C correctly,
- * so we have to do it by hand for them.
- */
-
- /* This will update buffers A and B. */
- upa_writel(ctx->stencil, &ffb->stencil);
- upa_writel(ctx->stencilctl, &ffb->stencilctl);
-
- /* Force FFB to use buffer C 3dram regs. */
- upa_writel(0x80000000, &ffb->fbc);
- upa_writel((ctx->stencilctl | 0x80000),
- &ffb->rawstencilctl);
-
- /* Now restore the correct FBC controls. */
- upa_writel(ctx->fbc, &ffb->fbc);
- }
- }
-
- /* Restore the 32x32 area pattern. */
- for (i = 0; i < 32; i++)
- upa_writel(ctx->area_pattern[i], &ffb->pattern[i]);
-
- /* Finally, stash away the User Constol/Status Register.
- * The only state we really preserve here is the picking
- * control.
- */
- upa_writel((ctx->ucsr & 0xf0000), &ffb->ucsr);
-}
-
-#define FFB_UCSR_FB_BUSY 0x01000000
-#define FFB_UCSR_RP_BUSY 0x02000000
-#define FFB_UCSR_ALL_BUSY (FFB_UCSR_RP_BUSY|FFB_UCSR_FB_BUSY)
-
-static void FFBWait(ffb_fbcPtr ffb)
-{
- int limit = 100000;
-
- do {
- u32 regval = upa_readl(&ffb->ucsr);
-
- if ((regval & FFB_UCSR_ALL_BUSY) == 0)
- break;
- } while (--limit);
-}
-
-int ffb_driver_context_switch(drm_device_t * dev, int old, int new)
-{
- ffb_dev_priv_t *fpriv = (ffb_dev_priv_t *) dev->dev_private;
-
-#ifdef DRM_DMA_HISTOGRAM
- dev->ctx_start = get_cycles();
-#endif
-
- DRM_DEBUG("Context switch from %d to %d\n", old, new);
-
- if (new == dev->last_context || dev->last_context == 0) {
- dev->last_context = new;
- return 0;
- }
-
- FFBWait(fpriv->regs);
- ffb_save_context(fpriv, old);
- ffb_restore_context(fpriv, old, new);
- FFBWait(fpriv->regs);
-
- dev->last_context = new;
-
- return 0;
-}
-
-int ffb_driver_resctx(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
- drm_ctx_res_t res;
- drm_ctx_t ctx;
- int i;
-
- DRM_DEBUG("%d\n", DRM_RESERVED_CONTEXTS);
- if (copy_from_user(&res, (drm_ctx_res_t __user *) arg, sizeof(res)))
- return -EFAULT;
- if (res.count >= DRM_RESERVED_CONTEXTS) {
- memset(&ctx, 0, sizeof(ctx));
- for (i = 0; i < DRM_RESERVED_CONTEXTS; i++) {
- ctx.handle = i;
- if (copy_to_user(&res.contexts[i], &i, sizeof(i)))
- return -EFAULT;
- }
- }
- res.count = DRM_RESERVED_CONTEXTS;
- if (copy_to_user((drm_ctx_res_t __user *) arg, &res, sizeof(res)))
- return -EFAULT;
- return 0;
-}
-
-int ffb_driver_addctx(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
- drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
- drm_ctx_t ctx;
- int idx;
-
- if (copy_from_user(&ctx, (drm_ctx_t __user *) arg, sizeof(ctx)))
- return -EFAULT;
- idx = DRM(alloc_queue) (dev, (ctx.flags & _DRM_CONTEXT_2DONLY));
- if (idx < 0)
- return -ENFILE;
-
- DRM_DEBUG("%d\n", ctx.handle);
- ctx.handle = idx;
- if (copy_to_user((drm_ctx_t __user *) arg, &ctx, sizeof(ctx)))
- return -EFAULT;
- return 0;
-}
-
-int ffb_driver_modctx(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
- drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
- ffb_dev_priv_t *fpriv = (ffb_dev_priv_t *) dev->dev_private;
- struct ffb_hw_context *hwctx;
- drm_ctx_t ctx;
- int idx;
-
- if (copy_from_user(&ctx, (drm_ctx_t __user *) arg, sizeof(ctx)))
- return -EFAULT;
-
- idx = ctx.handle;
- if (idx <= 0 || idx >= FFB_MAX_CTXS)
- return -EINVAL;
-
- hwctx = fpriv->hw_state[idx - 1];
- if (hwctx == NULL)
- return -EINVAL;
-
- if ((ctx.flags & _DRM_CONTEXT_2DONLY) == 0)
- hwctx->is_2d_only = 0;
- else
- hwctx->is_2d_only = 1;
-
- return 0;
-}
-
-int ffb_driver_getctx(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
- drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
- ffb_dev_priv_t *fpriv = (ffb_dev_priv_t *) dev->dev_private;
- struct ffb_hw_context *hwctx;
- drm_ctx_t ctx;
- int idx;
-
- if (copy_from_user(&ctx, (drm_ctx_t __user *) arg, sizeof(ctx)))
- return -EFAULT;
-
- idx = ctx.handle;
- if (idx <= 0 || idx >= FFB_MAX_CTXS)
- return -EINVAL;
-
- hwctx = fpriv->hw_state[idx - 1];
- if (hwctx == NULL)
- return -EINVAL;
-
- if (hwctx->is_2d_only != 0)
- ctx.flags = _DRM_CONTEXT_2DONLY;
- else
- ctx.flags = 0;
-
- if (copy_to_user((drm_ctx_t __user *) arg, &ctx, sizeof(ctx)))
- return -EFAULT;
-
- return 0;
-}
-
-int ffb_driver_switchctx(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
- drm_ctx_t ctx;
-
- if (copy_from_user(&ctx, (drm_ctx_t __user *) arg, sizeof(ctx)))
- return -EFAULT;
- DRM_DEBUG("%d\n", ctx.handle);
- return ffb_driver_context_switch(dev, dev->last_context, ctx.handle);
-}
-
-int ffb_driver_newctx(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
- drm_ctx_t ctx;
-
- if (copy_from_user(&ctx, (drm_ctx_t __user *) arg, sizeof(ctx)))
- return -EFAULT;
- DRM_DEBUG("%d\n", ctx.handle);
-
- return 0;
-}
-
-int ffb_driver_rmctx(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
- drm_ctx_t ctx;
- drm_file_t *priv = filp->private_data;
- drm_device_t *dev = priv->dev;
- ffb_dev_priv_t *fpriv = (ffb_dev_priv_t *) dev->dev_private;
- int idx;
-
- if (copy_from_user(&ctx, (drm_ctx_t __user *) arg, sizeof(ctx)))
- return -EFAULT;
- DRM_DEBUG("%d\n", ctx.handle);
-
- idx = ctx.handle - 1;
- if (idx < 0 || idx >= FFB_MAX_CTXS)
- return -EINVAL;
-
- kfree(fpriv->hw_state[idx]);
- fpriv->hw_state[idx] = NULL;
- return 0;
-}
-
-void ffb_set_context_ioctls(void)
-{
- DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_ADD_CTX)].func = ffb_driver_addctx;
- DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_RM_CTX)].func = ffb_driver_rmctx;
- DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_MOD_CTX)].func = ffb_driver_modctx;
- DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_GET_CTX)].func = ffb_driver_getctx;
- DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_SWITCH_CTX)].func =
- ffb_driver_switchctx;
- DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_NEW_CTX)].func = ffb_driver_newctx;
- DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_RES_CTX)].func = ffb_driver_resctx;
-
-}
+++ /dev/null
-/* $Id: ffb_drv.c,v 1.16 2001/10/18 16:00:24 davem Exp $
- * ffb_drv.c: Creator/Creator3D direct rendering driver.
- *
- * Copyright (C) 2000 David S. Miller (davem@redhat.com)
- */
-
-#include "ffb.h"
-#include "drmP.h"
-
-#include "ffb_drv.h"
-
-#include <linux/smp_lock.h>
-#include <asm/shmparam.h>
-#include <asm/oplib.h>
-#include <asm/upa.h>
-
-#define DRIVER_AUTHOR "David S. Miller"
-
-#define DRIVER_NAME "ffb"
-#define DRIVER_DESC "Creator/Creator3D"
-#define DRIVER_DATE "20000517"
-
-#define DRIVER_MAJOR 0
-#define DRIVER_MINOR 0
-#define DRIVER_PATCHLEVEL 1
-
-typedef struct _ffb_position_t {
- int node;
- int root;
-} ffb_position_t;
-
-static ffb_position_t *ffb_position;
-
-static void get_ffb_type(ffb_dev_priv_t * ffb_priv, int instance)
-{
- volatile unsigned char *strap_bits;
- unsigned char val;
-
- strap_bits = (volatile unsigned char *)
- (ffb_priv->card_phys_base + 0x00200000UL);
-
- /* Don't ask, you have to read the value twice for whatever
- * reason to get correct contents.
- */
- val = upa_readb(strap_bits);
- val = upa_readb(strap_bits);
- switch (val & 0x78) {
- case (0x0 << 5) | (0x0 << 3):
- ffb_priv->ffb_type = ffb1_prototype;
- printk("ffb%d: Detected FFB1 pre-FCS prototype\n", instance);
- break;
- case (0x0 << 5) | (0x1 << 3):
- ffb_priv->ffb_type = ffb1_standard;
- printk("ffb%d: Detected FFB1\n", instance);
- break;
- case (0x0 << 5) | (0x3 << 3):
- ffb_priv->ffb_type = ffb1_speedsort;
- printk("ffb%d: Detected FFB1-SpeedSort\n", instance);
- break;
- case (0x1 << 5) | (0x0 << 3):
- ffb_priv->ffb_type = ffb2_prototype;
- printk("ffb%d: Detected FFB2/vertical pre-FCS prototype\n",
- instance);
- break;
- case (0x1 << 5) | (0x1 << 3):
- ffb_priv->ffb_type = ffb2_vertical;
- printk("ffb%d: Detected FFB2/vertical\n", instance);
- break;
- case (0x1 << 5) | (0x2 << 3):
- ffb_priv->ffb_type = ffb2_vertical_plus;
- printk("ffb%d: Detected FFB2+/vertical\n", instance);
- break;
- case (0x2 << 5) | (0x0 << 3):
- ffb_priv->ffb_type = ffb2_horizontal;
- printk("ffb%d: Detected FFB2/horizontal\n", instance);
- break;
- case (0x2 << 5) | (0x2 << 3):
- ffb_priv->ffb_type = ffb2_horizontal;
- printk("ffb%d: Detected FFB2+/horizontal\n", instance);
- break;
- default:
- ffb_priv->ffb_type = ffb2_vertical;
- printk("ffb%d: Unknown boardID[%08x], assuming FFB2\n",
- instance, val);
- break;
- };
-}
-
-static void ffb_apply_upa_parent_ranges(int parent,
- struct linux_prom64_registers *regs)
-{
- struct linux_prom64_ranges ranges[PROMREG_MAX];
- char name[128];
- int len, i;
-
- prom_getproperty(parent, "name", name, sizeof(name));
- if (strcmp(name, "upa") != 0)
- return;
-
- len =
- prom_getproperty(parent, "ranges", (void *)ranges, sizeof(ranges));
- if (len <= 0)
- return;
-
- len /= sizeof(struct linux_prom64_ranges);
- for (i = 0; i < len; i++) {
- struct linux_prom64_ranges *rng = &ranges[i];
- u64 phys_addr = regs->phys_addr;
-
- if (phys_addr >= rng->ot_child_base &&
- phys_addr < (rng->ot_child_base + rng->or_size)) {
- regs->phys_addr -= rng->ot_child_base;
- regs->phys_addr += rng->ot_parent_base;
- return;
- }
- }
-
- return;
-}
-
-static int ffb_init_one(drm_device_t * dev, int prom_node, int parent_node,
- int instance)
-{
- struct linux_prom64_registers regs[2 * PROMREG_MAX];
- ffb_dev_priv_t *ffb_priv = (ffb_dev_priv_t *) dev->dev_private;
- int i;
-
- ffb_priv->prom_node = prom_node;
- if (prom_getproperty(ffb_priv->prom_node, "reg",
- (void *)regs, sizeof(regs)) <= 0) {
- return -EINVAL;
- }
- ffb_apply_upa_parent_ranges(parent_node, ®s[0]);
- ffb_priv->card_phys_base = regs[0].phys_addr;
- ffb_priv->regs = (ffb_fbcPtr)
- (regs[0].phys_addr + 0x00600000UL);
- get_ffb_type(ffb_priv, instance);
- for (i = 0; i < FFB_MAX_CTXS; i++)
- ffb_priv->hw_state[i] = NULL;
-
- return 0;
-}
-
-static drm_map_t *ffb_find_map(struct file *filp, unsigned long off)
-{
- drm_file_t *priv = filp->private_data;
- drm_device_t *dev;
- drm_map_list_t *r_list;
- struct list_head *list;
- drm_map_t *map;
-
- if (!priv || (dev = priv->dev) == NULL)
- return NULL;
-
- list_for_each(list, &dev->maplist->head) {
- r_list = (drm_map_list_t *) list;
- map = r_list->map;
- if (!map)
- continue;
- if (r_list->user_token == off)
- return map;
- }
-
- return NULL;
-}
-
-unsigned long ffb_get_unmapped_area(struct file *filp,
- unsigned long hint,
- unsigned long len,
- unsigned long pgoff, unsigned long flags)
-{
- drm_map_t *map = ffb_find_map(filp, pgoff << PAGE_SHIFT);
- unsigned long addr = -ENOMEM;
-
- if (!map)
- return get_unmapped_area(NULL, hint, len, pgoff, flags);
-
- if (map->type == _DRM_FRAME_BUFFER || map->type == _DRM_REGISTERS) {
-#ifdef HAVE_ARCH_FB_UNMAPPED_AREA
- addr = get_fb_unmapped_area(filp, hint, len, pgoff, flags);
-#else
- addr = get_unmapped_area(NULL, hint, len, pgoff, flags);
-#endif
- } else if (map->type == _DRM_SHM && SHMLBA > PAGE_SIZE) {
- unsigned long slack = SHMLBA - PAGE_SIZE;
-
- addr = get_unmapped_area(NULL, hint, len + slack, pgoff, flags);
- if (!(addr & ~PAGE_MASK)) {
- unsigned long kvirt = (unsigned long)map->handle;
-
- if ((kvirt & (SHMLBA - 1)) != (addr & (SHMLBA - 1))) {
- unsigned long koff, aoff;
-
- koff = kvirt & (SHMLBA - 1);
- aoff = addr & (SHMLBA - 1);
- if (koff < aoff)
- koff += SHMLBA;
-
- addr += (koff - aoff);
- }
- }
- } else {
- addr = get_unmapped_area(NULL, hint, len, pgoff, flags);
- }
-
- return addr;
-}
-
-static int ffb_presetup(drm_device_t * dev)
-{
- ffb_dev_priv_t *ffb_priv;
- int ret = 0;
- int i = 0;
-
- /* Check for the case where no device was found. */
- if (ffb_position == NULL)
- return -ENODEV;
-
- /* code used to use numdevs no numdevs anymore */
- ffb_priv = kmalloc(sizeof(ffb_dev_priv_t), GFP_KERNEL);
- if (!ffb_priv)
- return -ENOMEM;
- memset(ffb_priv, 0, sizeof(*ffb_priv));
- dev->dev_private = ffb_priv;
-
- ret = ffb_init_one(dev, ffb_position[i].node, ffb_position[i].root, i);
- return ret;
-}
-
-static void ffb_driver_release(drm_device_t * dev, struct file *filp)
-{
- ffb_dev_priv_t *fpriv = (ffb_dev_priv_t *) dev->dev_private;
- int context = _DRM_LOCKING_CONTEXT(dev->lock.hw_lock->lock);
- int idx;
-
- idx = context - 1;
- if (fpriv &&
- context != DRM_KERNEL_CONTEXT && fpriv->hw_state[idx] != NULL) {
- kfree(fpriv->hw_state[idx]);
- fpriv->hw_state[idx] = NULL;
- }
-}
-
-static void ffb_driver_pretakedown(drm_device_t * dev)
-{
- kfree(dev->dev_private);
-}
-
-static int ffb_driver_postcleanup(drm_device_t * dev)
-{
- kfree(ffb_position);
- return 0;
-}
-
-static void ffb_driver_kernel_context_switch_unlock(struct drm_device *dev,
- drm_lock_t * lock)
-{
- dev->lock.filp = 0;
- {
- __volatile__ unsigned int *plock = &dev->lock.hw_lock->lock;
- unsigned int old, new, prev, ctx;
-
- ctx = lock->context;
- do {
- old = *plock;
- new = ctx;
- prev = cmpxchg(plock, old, new);
- } while (prev != old);
- }
- wake_up_interruptible(&dev->lock.lock_queue);
-}
-
-static unsigned long ffb_driver_get_map_ofs(drm_map_t * map)
-{
- return (map->offset & 0xffffffff);
-}
-
-static unsigned long ffb_driver_get_reg_ofs(drm_device_t * dev)
-{
- ffb_dev_priv_t *ffb_priv = (ffb_dev_priv_t *) dev->dev_private;
-
- if (ffb_priv)
- return ffb_priv->card_phys_base;
-
- return 0;
-}
-
-static int postinit(struct drm_device *dev, unsigned long flags)
-{
- DRM_INFO("Initialized %s %d.%d.%d %s on minor %d\n",
- DRIVER_NAME,
- DRIVER_MAJOR,
- DRIVER_MINOR, DRIVER_PATCHLEVEL, DRIVER_DATE, dev->minor);
- return 0;
-}
-
-static int version(drm_version_t * version)
-{
- int len;
-
- version->version_major = DRIVER_MAJOR;
- version->version_minor = DRIVER_MINOR;
- version->version_patchlevel = DRIVER_PATCHLEVEL;
- DRM_COPY(version->name, DRIVER_NAME);
- DRM_COPY(version->date, DRIVER_DATE);
- DRM_COPY(version->desc, DRIVER_DESC);
- return 0;
-}
-
-static drm_ioctl_desc_t ioctls[] = {
-
-};
-
-static struct drm_driver driver = {
- .driver_features = 0,
- .dev_priv_size = sizeof(u32),
- .release = ffb_driver_release,
- .presetup = ffb_presetup,
- .pretakedown = ffb_driver_pretakedown,
- .postcleanup = ffb_driver_postcleanup,
- .kernel_context_switch = ffb_driver_context_switch,
- .kernel_context_switch_unlock = ffb_driver_kernel_context_switch_unlock,
- .get_map_ofs = ffb_driver_get_map_ofs,
- .get_reg_ofs = ffb_driver_get_reg_ofs,
- .postinit = postinit,
- .version = version,
- .ioctls = ioctls,
- .num_ioctls = DRM_ARRAY_SIZE(ioctls),
- .fops = {
- .owner = THIS_MODULE,
- .open = drm_open,
- .release = drm_release,
- .ioctl = drm_ioctl,
- .mmap = drm_mmap,
- .poll = drm_poll,
- .fasync = drm_fasync,
- }
- ,
-};
-
-static int __init ffb_init(void)
-{
- return -ENODEV;
-}
-
-static void __exit ffb_exit(void)
-{
-}
-
-module_init(ffb_init);
-module_exit(ffb_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL and additional rights");
+++ /dev/null
-/* $Id: ffb_drv.h,v 1.1 2000/06/01 04:24:39 davem Exp $
- * ffb_drv.h: Creator/Creator3D direct rendering driver.
- *
- * Copyright (C) 2000 David S. Miller (davem@redhat.com)
- */
-
-/* Auxilliary clips. */
-typedef struct {
- volatile unsigned int min;
- volatile unsigned int max;
-} ffb_auxclip, *ffb_auxclipPtr;
-
-/* FFB register set. */
-typedef struct _ffb_fbc {
- /* Next vertex registers, on the right we list which drawops
- * use said register and the logical name the register has in
- * that context.
- *//* DESCRIPTION DRAWOP(NAME) */
- /*0x00*/ unsigned int pad1[3];
- /* Reserved */
- /*0x0c*/ volatile unsigned int alpha;
- /* ALPHA Transparency */
- /*0x10*/ volatile unsigned int red;
- /* RED */
- /*0x14*/ volatile unsigned int green;
- /* GREEN */
- /*0x18*/ volatile unsigned int blue;
- /* BLUE */
- /*0x1c*/ volatile unsigned int z;
- /* DEPTH */
- /*0x20*/ volatile unsigned int y;
- /* Y triangle(DOYF) */
- /* aadot(DYF) */
- /* ddline(DYF) */
- /* aaline(DYF) */
- /*0x24*/ volatile unsigned int x;
- /* X triangle(DOXF) */
- /* aadot(DXF) */
- /* ddline(DXF) */
- /* aaline(DXF) */
- /*0x28*/ unsigned int pad2[2];
- /* Reserved */
- /*0x30*/ volatile unsigned int ryf;
- /* Y (alias to DOYF) ddline(RYF) */
- /* aaline(RYF) */
- /* triangle(RYF) */
- /*0x34*/ volatile unsigned int rxf;
- /* X ddline(RXF) */
- /* aaline(RXF) */
- /* triangle(RXF) */
- /*0x38*/ unsigned int pad3[2];
- /* Reserved */
- /*0x40*/ volatile unsigned int dmyf;
- /* Y (alias to DOYF) triangle(DMYF) */
- /*0x44*/ volatile unsigned int dmxf;
- /* X triangle(DMXF) */
- /*0x48*/ unsigned int pad4[2];
- /* Reserved */
- /*0x50*/ volatile unsigned int ebyi;
- /* Y (alias to RYI) polygon(EBYI) */
- /*0x54*/ volatile unsigned int ebxi;
- /* X polygon(EBXI) */
- /*0x58*/ unsigned int pad5[2];
- /* Reserved */
- /*0x60*/ volatile unsigned int by;
- /* Y brline(RYI) */
- /* fastfill(OP) */
- /* polygon(YI) */
- /* rectangle(YI) */
- /* bcopy(SRCY) */
- /* vscroll(SRCY) */
- /*0x64*/ volatile unsigned int bx;
- /* X brline(RXI) */
- /* polygon(XI) */
- /* rectangle(XI) */
- /* bcopy(SRCX) */
- /* vscroll(SRCX) */
- /* fastfill(GO) */
- /*0x68*/ volatile unsigned int dy;
- /* destination Y fastfill(DSTY) */
- /* bcopy(DSRY) */
- /* vscroll(DSRY) */
- /*0x6c*/ volatile unsigned int dx;
- /* destination X fastfill(DSTX) */
- /* bcopy(DSTX) */
- /* vscroll(DSTX) */
- /*0x70*/ volatile unsigned int bh;
- /* Y (alias to RYI) brline(DYI) */
- /* dot(DYI) */
- /* polygon(ETYI) */
- /* Height fastfill(H) */
- /* bcopy(H) */
- /* vscroll(H) */
- /* Y count fastfill(NY) */
- /*0x74*/ volatile unsigned int bw;
- /* X dot(DXI) */
- /* brline(DXI) */
- /* polygon(ETXI) */
- /* fastfill(W) */
- /* bcopy(W) */
- /* vscroll(W) */
- /* fastfill(NX) */
- /*0x78*/ unsigned int pad6[2];
- /* Reserved */
- /*0x80*/ unsigned int pad7[32];
- /* Reserved */
-
- /* Setup Unit's vertex state register */
-/*100*/ volatile unsigned int suvtx;
- /*104*/ unsigned int pad8[63];
- /* Reserved */
-
- /* Frame Buffer Control Registers */
- /*200*/ volatile unsigned int ppc;
- /* Pixel Processor Control */
- /*204*/ volatile unsigned int wid;
- /* Current WID */
- /*208*/ volatile unsigned int fg;
- /* FG data */
- /*20c*/ volatile unsigned int bg;
- /* BG data */
- /*210*/ volatile unsigned int consty;
- /* Constant Y */
- /*214*/ volatile unsigned int constz;
- /* Constant Z */
- /*218*/ volatile unsigned int xclip;
- /* X Clip */
- /*21c*/ volatile unsigned int dcss;
- /* Depth Cue Scale Slope */
- /*220*/ volatile unsigned int vclipmin;
- /* Viewclip XY Min Bounds */
- /*224*/ volatile unsigned int vclipmax;
- /* Viewclip XY Max Bounds */
- /*228*/ volatile unsigned int vclipzmin;
- /* Viewclip Z Min Bounds */
- /*22c*/ volatile unsigned int vclipzmax;
- /* Viewclip Z Max Bounds */
- /*230*/ volatile unsigned int dcsf;
- /* Depth Cue Scale Front Bound */
- /*234*/ volatile unsigned int dcsb;
- /* Depth Cue Scale Back Bound */
- /*238*/ volatile unsigned int dczf;
- /* Depth Cue Z Front */
- /*23c*/ volatile unsigned int dczb;
- /* Depth Cue Z Back */
- /*240*/ unsigned int pad9;
- /* Reserved */
- /*244*/ volatile unsigned int blendc;
- /* Alpha Blend Control */
- /*248*/ volatile unsigned int blendc1;
- /* Alpha Blend Color 1 */
- /*24c*/ volatile unsigned int blendc2;
- /* Alpha Blend Color 2 */
- /*250*/ volatile unsigned int fbramitc;
- /* FB RAM Interleave Test Control */
- /*254*/ volatile unsigned int fbc;
- /* Frame Buffer Control */
- /*258*/ volatile unsigned int rop;
- /* Raster OPeration */
- /*25c*/ volatile unsigned int cmp;
- /* Frame Buffer Compare */
- /*260*/ volatile unsigned int matchab;
- /* Buffer AB Match Mask */
- /*264*/ volatile unsigned int matchc;
- /* Buffer C(YZ) Match Mask */
- /*268*/ volatile unsigned int magnab;
- /* Buffer AB Magnitude Mask */
- /*26c*/ volatile unsigned int magnc;
- /* Buffer C(YZ) Magnitude Mask */
- /*270*/ volatile unsigned int fbcfg0;
- /* Frame Buffer Config 0 */
- /*274*/ volatile unsigned int fbcfg1;
- /* Frame Buffer Config 1 */
- /*278*/ volatile unsigned int fbcfg2;
- /* Frame Buffer Config 2 */
- /*27c*/ volatile unsigned int fbcfg3;
- /* Frame Buffer Config 3 */
- /*280*/ volatile unsigned int ppcfg;
- /* Pixel Processor Config */
- /*284*/ volatile unsigned int pick;
- /* Picking Control */
- /*288*/ volatile unsigned int fillmode;
- /* FillMode */
- /*28c*/ volatile unsigned int fbramwac;
- /* FB RAM Write Address Control */
- /*290*/ volatile unsigned int pmask;
- /* RGB PlaneMask */
- /*294*/ volatile unsigned int xpmask;
- /* X PlaneMask */
- /*298*/ volatile unsigned int ypmask;
- /* Y PlaneMask */
- /*29c*/ volatile unsigned int zpmask;
- /* Z PlaneMask */
- /*2a0*/ ffb_auxclip auxclip[4];
- /* Auxilliary Viewport Clip */
-
- /* New 3dRAM III support regs */
-/*2c0*/ volatile unsigned int rawblend2;
-/*2c4*/ volatile unsigned int rawpreblend;
-/*2c8*/ volatile unsigned int rawstencil;
-/*2cc*/ volatile unsigned int rawstencilctl;
-/*2d0*/ volatile unsigned int threedram1;
-/*2d4*/ volatile unsigned int threedram2;
-/*2d8*/ volatile unsigned int passin;
-/*2dc*/ volatile unsigned int rawclrdepth;
-/*2e0*/ volatile unsigned int rawpmask;
-/*2e4*/ volatile unsigned int rawcsrc;
-/*2e8*/ volatile unsigned int rawmatch;
-/*2ec*/ volatile unsigned int rawmagn;
-/*2f0*/ volatile unsigned int rawropblend;
-/*2f4*/ volatile unsigned int rawcmp;
-/*2f8*/ volatile unsigned int rawwac;
-/*2fc*/ volatile unsigned int fbramid;
-
- /*300*/ volatile unsigned int drawop;
- /* Draw OPeration */
- /*304*/ unsigned int pad10[2];
- /* Reserved */
- /*30c*/ volatile unsigned int lpat;
- /* Line Pattern control */
- /*310*/ unsigned int pad11;
- /* Reserved */
- /*314*/ volatile unsigned int fontxy;
- /* XY Font coordinate */
- /*318*/ volatile unsigned int fontw;
- /* Font Width */
- /*31c*/ volatile unsigned int fontinc;
- /* Font Increment */
- /*320*/ volatile unsigned int font;
- /* Font bits */
- /*324*/ unsigned int pad12[3];
- /* Reserved */
-/*330*/ volatile unsigned int blend2;
-/*334*/ volatile unsigned int preblend;
-/*338*/ volatile unsigned int stencil;
-/*33c*/ volatile unsigned int stencilctl;
-
- /*340*/ unsigned int pad13[4];
- /* Reserved */
- /*350*/ volatile unsigned int dcss1;
- /* Depth Cue Scale Slope 1 */
- /*354*/ volatile unsigned int dcss2;
- /* Depth Cue Scale Slope 2 */
- /*358*/ volatile unsigned int dcss3;
- /* Depth Cue Scale Slope 3 */
-/*35c*/ volatile unsigned int widpmask;
-/*360*/ volatile unsigned int dcs2;
-/*364*/ volatile unsigned int dcs3;
-/*368*/ volatile unsigned int dcs4;
- /*36c*/ unsigned int pad14;
- /* Reserved */
-/*370*/ volatile unsigned int dcd2;
-/*374*/ volatile unsigned int dcd3;
-/*378*/ volatile unsigned int dcd4;
- /*37c*/ unsigned int pad15;
- /* Reserved */
- /*380*/ volatile unsigned int pattern[32];
- /* area Pattern */
- /*400*/ unsigned int pad16[8];
- /* Reserved */
- /*420*/ volatile unsigned int reset;
- /* chip RESET */
- /*424*/ unsigned int pad17[247];
- /* Reserved */
- /*800*/ volatile unsigned int devid;
- /* Device ID */
- /*804*/ unsigned int pad18[63];
- /* Reserved */
- /*900*/ volatile unsigned int ucsr;
- /* User Control & Status Register */
- /*904*/ unsigned int pad19[31];
- /* Reserved */
- /*980*/ volatile unsigned int mer;
- /* Mode Enable Register */
- /*984*/ unsigned int pad20[1439];
- /* Reserved */
-} ffb_fbc, *ffb_fbcPtr;
-
-struct ffb_hw_context {
- int is_2d_only;
-
- unsigned int ppc;
- unsigned int wid;
- unsigned int fg;
- unsigned int bg;
- unsigned int consty;
- unsigned int constz;
- unsigned int xclip;
- unsigned int dcss;
- unsigned int vclipmin;
- unsigned int vclipmax;
- unsigned int vclipzmin;
- unsigned int vclipzmax;
- unsigned int dcsf;
- unsigned int dcsb;
- unsigned int dczf;
- unsigned int dczb;
- unsigned int blendc;
- unsigned int blendc1;
- unsigned int blendc2;
- unsigned int fbc;
- unsigned int rop;
- unsigned int cmp;
- unsigned int matchab;
- unsigned int matchc;
- unsigned int magnab;
- unsigned int magnc;
- unsigned int pmask;
- unsigned int xpmask;
- unsigned int ypmask;
- unsigned int zpmask;
- unsigned int auxclip0min;
- unsigned int auxclip0max;
- unsigned int auxclip1min;
- unsigned int auxclip1max;
- unsigned int auxclip2min;
- unsigned int auxclip2max;
- unsigned int auxclip3min;
- unsigned int auxclip3max;
- unsigned int drawop;
- unsigned int lpat;
- unsigned int fontxy;
- unsigned int fontw;
- unsigned int fontinc;
- unsigned int area_pattern[32];
- unsigned int ucsr;
- unsigned int stencil;
- unsigned int stencilctl;
- unsigned int dcss1;
- unsigned int dcss2;
- unsigned int dcss3;
- unsigned int dcs2;
- unsigned int dcs3;
- unsigned int dcs4;
- unsigned int dcd2;
- unsigned int dcd3;
- unsigned int dcd4;
- unsigned int mer;
-};
-
-#define FFB_MAX_CTXS 32
-
-enum ffb_chip_type {
- ffb1_prototype = 0, /* Early pre-FCS FFB */
- ffb1_standard, /* First FCS FFB, 100Mhz UPA, 66MHz gclk */
- ffb1_speedsort, /* Second FCS FFB, 100Mhz UPA, 75MHz gclk */
- ffb2_prototype, /* Early pre-FCS vertical FFB2 */
- ffb2_vertical, /* First FCS FFB2/vertical, 100Mhz UPA, 100MHZ gclk,
- 75(SingleBuffer)/83(DoubleBuffer) MHz fclk */
- ffb2_vertical_plus, /* Second FCS FFB2/vertical, same timings */
- ffb2_horizontal, /* First FCS FFB2/horizontal, same timings as FFB2/vert */
- ffb2_horizontal_plus, /* Second FCS FFB2/horizontal, same timings */
- afb_m3, /* FCS Elite3D, 3 float chips */
- afb_m6 /* FCS Elite3D, 6 float chips */
-};
-
-typedef struct ffb_dev_priv {
- /* Misc software state. */
- int prom_node;
- enum ffb_chip_type ffb_type;
- u64 card_phys_base;
- struct miscdevice miscdev;
-
- /* Controller registers. */
- ffb_fbcPtr regs;
-
- /* Context table. */
- struct ffb_hw_context *hw_state[FFB_MAX_CTXS];
-} ffb_dev_priv_t;
-
-extern unsigned long ffb_get_unmapped_area(struct file *filp,
- unsigned long hint,
- unsigned long len,
- unsigned long pgoff,
- unsigned long flags);
-extern void ffb_set_context_ioctls(void);
-extern drm_ioctl_desc_t DRM(ioctls)[];
-
-extern int ffb_driver_context_switch(drm_device_t * dev, int old, int new);
}
-static unsigned int gs_baudrates[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
-};
-
-
void gs_set_termios (struct tty_struct * tty,
struct ktermios * old_termios)
{
baudrate = tty_get_baud_rate(tty);
- baudrate = gs_baudrates[baudrate];
if ((tiosp->c_cflag & CBAUD) == B38400) {
if ( (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
baudrate = 57600;
{
if (!valid_mmap_phys_addr_range(pgoff, len))
return (unsigned long) -EINVAL;
- return pgoff;
+ return pgoff << PAGE_SHIFT;
}
/* can't do an in-place private mapping if there's no MMU */
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was
*/
- case TIOCMIWAIT: {
- DECLARE_WAITQUEUE(wait, current);
- int ret;
+ case TIOCMIWAIT:
+ spin_lock_irqsave(&info->slock, flags);
+ cnow = info->icount; /* note the counters on entry */
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ wait_event_interruptible(info->delta_msr_wait, ({
+ cprev = cnow;
spin_lock_irqsave(&info->slock, flags);
- cprev = info->icount; /* note the counters on entry */
+ cnow = info->icount; /* atomic copy */
spin_unlock_irqrestore(&info->slock, flags);
- add_wait_queue(&info->delta_msr_wait, &wait);
- while (1) {
- spin_lock_irqsave(&info->slock, flags);
- cnow = info->icount; /* atomic copy */
- spin_unlock_irqrestore(&info->slock, flags);
-
- set_current_state(TASK_INTERRUPTIBLE);
- if (((arg & TIOCM_RNG) &&
- (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) &&
- (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) &&
- (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) &&
- (cnow.cts != cprev.cts))) {
- ret = 0;
- break;
- }
- /* see if a signal did it */
- if (signal_pending(current)) {
- ret = -ERESTARTSYS;
- break;
- }
- cprev = cnow;
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->delta_msr_wait, &wait);
- break;
- }
- /* NOTREACHED */
+ ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts));
+ }));
+ break;
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was
*/
- case TIOCMIWAIT: {
- DECLARE_WAITQUEUE(wait, current);
- int ret;
+ case TIOCMIWAIT:
spin_lock_irqsave(&info->slock, flags);
- cprev = info->icount; /* note the counters on entry */
+ cnow = info->icount; /* note the counters on entry */
spin_unlock_irqrestore(&info->slock, flags);
- add_wait_queue(&info->delta_msr_wait, &wait);
- while (1) {
+ wait_event_interruptible(info->delta_msr_wait, ({
+ cprev = cnow;
spin_lock_irqsave(&info->slock, flags);
cnow = info->icount; /* atomic copy */
spin_unlock_irqrestore(&info->slock, flags);
- set_current_state(TASK_INTERRUPTIBLE);
- if (((arg & TIOCM_RNG) &&
- (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) &&
- (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) &&
- (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) &&
- (cnow.cts != cprev.cts))) {
- ret = 0;
- break;
- }
- /* see if a signal did it */
- if (signal_pending(current)) {
- ret = -ERESTARTSYS;
- break;
- }
- cprev = cnow;
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->delta_msr_wait, &wait);
+ ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts));
+ }));
break;
- }
- /* NOTREACHED */
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
port->mon_data.rxcnt += cnt;
port->mon_data.up_rxcnt += cnt;
+ /*
+ * We are called from an interrupt context with &port->slock
+ * being held. Drop it temporarily in order to prevent
+ * recursive locking.
+ */
+ spin_unlock(&port->slock);
tty_flip_buffer_push(tty);
+ spin_lock(&port->slock);
}
static void mxser_transmit_chars(struct mxser_port *port)
/*
* Sony Programmable I/O Control Device driver for VAIO
*
+ * Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
+ *
* Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
*
* Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
MODULE_PARM_DESC(useinput,
"set this if you would like sonypi to feed events to the input subsystem");
+static int check_ioport = 1;
+module_param(check_ioport, int, 0444);
+MODULE_PARM_DESC(check_ioport,
+ "set this to 0 if you think the automatic ioport check for sony-laptop is wrong");
+
#define SONYPI_DEVICE_MODEL_TYPE1 1
#define SONYPI_DEVICE_MODEL_TYPE2 2
#define SONYPI_DEVICE_MODEL_TYPE3 3
u16 evtype_offset;
int camera_power;
int bluetooth_power;
- struct semaphore lock;
+ struct mutex lock;
struct kfifo *fifo;
spinlock_t fifo_lock;
wait_queue_head_t fifo_proc_list;
if (!camera)
return -EIO;
- down(&sonypi_device.lock);
+ mutex_lock(&sonypi_device.lock);
switch (command) {
case SONYPI_COMMAND_SETCAMERA:
command);
break;
}
- up(&sonypi_device.lock);
+ mutex_unlock(&sonypi_device.lock);
return 0;
}
static int sonypi_misc_release(struct inode *inode, struct file *file)
{
sonypi_misc_fasync(-1, file, 0);
- down(&sonypi_device.lock);
+ mutex_lock(&sonypi_device.lock);
sonypi_device.open_count--;
- up(&sonypi_device.lock);
+ mutex_unlock(&sonypi_device.lock);
return 0;
}
static int sonypi_misc_open(struct inode *inode, struct file *file)
{
- down(&sonypi_device.lock);
+ mutex_lock(&sonypi_device.lock);
/* Flush input queue on first open */
if (!sonypi_device.open_count)
kfifo_reset(sonypi_device.fifo);
sonypi_device.open_count++;
- up(&sonypi_device.lock);
+ mutex_unlock(&sonypi_device.lock);
return 0;
}
u8 val8;
u16 val16;
- down(&sonypi_device.lock);
+ mutex_lock(&sonypi_device.lock);
switch (cmd) {
case SONYPI_IOCGBRT:
if (sonypi_ec_read(SONYPI_LCD_LIGHT, &val8)) {
default:
ret = -EINVAL;
}
- up(&sonypi_device.lock);
+ mutex_unlock(&sonypi_device.lock);
return ret;
}
static int __devinit sonypi_setup_ioports(struct sonypi_device *dev,
const struct sonypi_ioport_list *ioport_list)
{
+ /* try to detect if sony-laptop is being used and thus
+ * has already requested one of the known ioports.
+ * As in the deprecated check_region this is racy has we have
+ * multiple ioports available and one of them can be requested
+ * between this check and the subsequent request. Anyway, as an
+ * attempt to be some more user-friendly as we currently are,
+ * this is enough.
+ */
+ const struct sonypi_ioport_list *check = ioport_list;
+ while (check_ioport && check->port1) {
+ if (!request_region(check->port1,
+ sonypi_device.region_size,
+ "Sony Programable I/O Device Check")) {
+ printk(KERN_ERR "sonypi: ioport 0x%.4x busy, using sony-laptop? "
+ "if not use check_ioport=0\n",
+ check->port1);
+ return -EBUSY;
+ }
+ release_region(check->port1, sonypi_device.region_size);
+ check++;
+ }
+
while (ioport_list->port1) {
if (request_region(ioport_list->port1,
struct pci_dev *pcidev;
int error;
+ printk(KERN_WARNING "sonypi: please try the sony-laptop module instead "
+ "and report failures, see also "
+ "http://www.linux.it/~malattia/wiki/index.php/Sony_drivers\n");
+
spin_lock_init(&sonypi_device.fifo_lock);
sonypi_device.fifo = kfifo_alloc(SONYPI_BUF_SIZE, GFP_KERNEL,
&sonypi_device.fifo_lock);
}
init_waitqueue_head(&sonypi_device.fifo_proc_list);
- init_MUTEX(&sonypi_device.lock);
+ mutex_init(&sonypi_device.lock);
sonypi_device.bluetooth_power = -1;
if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
add_wait_queue(&vt_activate_queue, &wait);
for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
retval = 0;
- if (vt == fg_console)
+
+ /*
+ * Synchronize with redraw_screen(). By acquiring the console
+ * semaphore we make sure that the console switch is completed
+ * before we return. If we didn't wait for the semaphore, we
+ * could return at a point where fg_console has already been
+ * updated, but the console switch hasn't been completed.
+ */
+ acquire_console_sem();
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (vt == fg_console) {
+ release_console_sem();
break;
+ }
+ release_console_sem();
retval = -EINTR;
if (signal_pending(current))
break;
/*
* The I/O port the PMTMR resides at.
* The location is detected during setup_arch(),
- * in arch/i386/acpi/boot.c
+ * in arch/i386/kernel/acpi/boot.c
*/
u32 pmtmr_ioport __read_mostly;
static inline void acpi_pm_need_workaround(void)
{
clocksource_acpi_pm.read = acpi_pm_read_slow;
- clocksource_acpi_pm.rating = 110;
+ clocksource_acpi_pm.rating = 120;
}
/*
{
unsigned int cpu = sys_dev->id;
int retval;
+
+ if (cpu_is_offline(cpu))
+ return 0;
+
if (unlikely(lock_policy_rwsem_write(cpu)))
BUG();
/* There is only *one* pci_eisa device per machine, right ? */
static struct eisa_root_device pci_eisa_root;
-static int __devinit pci_eisa_init (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __init pci_eisa_init(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
int rc;
if (size < rsize) {
dbg("report %d is too short, (%d < %d)", report->id, size, rsize);
- return -1;
+ memset(data + size, 0, rsize - size);
}
if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_report_event)
* ISA constants
*/
-#define REGION_ALIGNMENT ~7
-#define REGION_OFFSET 5
-#define REGION_LENGTH 2
+#define IOREGION_ALIGNMENT ~7
+#define IOREGION_OFFSET 5
+#define IOREGION_LENGTH 2
#define ADDR_REG_OFFSET 5
#define DATA_REG_OFFSET 6
break;
case 4:
reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73)
- | ((data->fan_div[4] & 0x03) << 3)
+ | ((data->fan_div[4] & 0x03) << 2)
| ((data->fan_div[4] & 0x04) << 5);
w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
break;
time */
if (data->fan[i] == 0xff
&& data->fan_div[i] < 0x07) {
- dev_dbg(&client->dev, "Increasing fan %d "
+ dev_dbg(&client->dev, "Increasing fan%d "
"clock divider from %u to %u\n",
- i, div_from_reg(data->fan_div[i]),
+ i + 1, div_from_reg(data->fan_div[i]),
div_from_reg(data->fan_div[i] + 1));
data->fan_div[i]++;
w83627ehf_write_fan_div(client, i);
u8 fan4pin, fan5pin;
int i, err = 0;
- if (!request_region(address + REGION_OFFSET, REGION_LENGTH,
+ if (!request_region(address + IOREGION_OFFSET, IOREGION_LENGTH,
w83627ehf_driver.driver.name)) {
err = -EBUSY;
goto exit;
exit_free:
kfree(data);
exit_release:
- release_region(address + REGION_OFFSET, REGION_LENGTH);
+ release_region(address + IOREGION_OFFSET, IOREGION_LENGTH);
exit:
return err;
}
if ((err = i2c_detach_client(client)))
return err;
- release_region(client->addr + REGION_OFFSET, REGION_LENGTH);
+ release_region(client->addr + IOREGION_OFFSET, IOREGION_LENGTH);
kfree(data);
return 0;
superio_select(W83627EHF_LD_HWM);
val = (superio_inb(SIO_REG_ADDR) << 8)
| superio_inb(SIO_REG_ADDR + 1);
- *addr = val & REGION_ALIGNMENT;
+ *addr = val & IOREGION_ALIGNMENT;
if (*addr == 0) {
superio_exit();
return -ENODEV;
config I2C_PASEMI
tristate "PA Semi SMBus interface"
-# depends on PPC_PASEMI && I2C && PCI
- depends on I2C && PCI
+ depends on PPC_PASEMI && I2C && PCI
help
Supports the PA Semi PWRficient on-chip SMBus interfaces.
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
- len = min_t(u8, data->block[0], 31);
+ len = min_t(u8, data->block[0],
+ I2C_SMBUS_BLOCK_MAX - 1);
amd_ec_write(smbus, AMD_SMB_CMD, command);
amd_ec_write(smbus, AMD_SMB_BCNT, len);
for (i = 0; i < len; i++)
int command, int hwpec);
static unsigned long i801_smba;
+static unsigned char i801_original_hstcfg;
static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
static int isich4;
}
pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
+ i801_original_hstcfg = temp;
temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
if (!(temp & SMBHSTCFG_HST_EN)) {
dev_info(&dev->dev, "Enabling SMBus device\n");
static void __devexit i801_remove(struct pci_dev *dev)
{
i2c_del_adapter(&i801_adapter);
+ pci_write_config_byte(I801_dev, SMBHSTCFG, i801_original_hstcfg);
pci_release_region(dev, SMBBAR);
/*
* do not call pci_disable_device(dev) since it can cause hard hangs on
*/
}
+#ifdef CONFIG_PM
+static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
+{
+ pci_save_state(dev);
+ pci_write_config_byte(dev, SMBHSTCFG, i801_original_hstcfg);
+ pci_set_power_state(dev, pci_choose_state(dev, mesg));
+ return 0;
+}
+
+static int i801_resume(struct pci_dev *dev)
+{
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+ return pci_enable_device(dev);
+}
+#else
+#define i801_suspend NULL
+#define i801_resume NULL
+#endif
+
static struct pci_driver i801_driver = {
.name = "i801_smbus",
.id_table = i801_ids,
.probe = i801_probe,
.remove = __devexit_p(i801_remove),
+ .suspend = i801_suspend,
+ .resume = i801_resume,
};
static int __init i2c_i801_init(void)
for (i = 0; i < msg->len - 1; i++)
TXFIFO_WR(smbus, msg->buf[i]);
- TXFIFO_WR(smbus, msg->buf[msg->len] |
+ TXFIFO_WR(smbus, msg->buf[msg->len-1] |
(stop ? MTXFIFO_STOP : 0));
}
rd = RXFIFO_RD(smbus);
len = min_t(u8, (rd & MRXFIFO_DATA_M),
I2C_SMBUS_BLOCK_MAX);
- TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ |
+ TXFIFO_WR(smbus, len | MTXFIFO_READ |
MTXFIFO_STOP);
} else {
len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX);
rd = RXFIFO_RD(smbus);
len = min_t(u8, (rd & MRXFIFO_DATA_M),
I2C_SMBUS_BLOCK_MAX - len);
- TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | MTXFIFO_STOP);
+ TXFIFO_WR(smbus, len | MTXFIFO_READ | MTXFIFO_STOP);
break;
default:
client->driver = &ds1374_driver;
ds1374_workqueue = create_singlethread_workqueue("ds1374");
+ if (!ds1374_workqueue) {
+ kfree(client);
+ return -ENOMEM; /* most expected reason */
+ }
if ((rc = i2c_attach_client(client)) != 0) {
kfree(client);
config IDE_MAX_HWIFS
int "Max IDE interfaces"
depends on ALPHA || SUPERH || IA64 || EMBEDDED
+ range 1 10
default 4
help
This is the maximum number of IDE hardware interfaces that will
---help---
There are two drivers for Serial ATA controllers.
- The main driver, "libata", exists inside the SCSI subsystem
- and supports most modern SATA controllers.
+ The main driver, "libata", uses the SCSI subsystem
+ and supports most modern SATA controllers. In order to use it
+ you may take a look at "Serial ATA (prod) and Parallel ATA
+ (experimental) drivers".
The IDE driver (which you are currently configuring) supports
a few first-generation SATA controllers.
cdrom_saw_media_change (drive);
/*printk("%s: media changed\n",drive->name);*/
return 0;
+ } else if ((sense_key == ILLEGAL_REQUEST) &&
+ (rq->cmd[0] == GPCMD_START_STOP_UNIT)) {
+ /*
+ * Don't print error message for this condition--
+ * SFF8090i indicates that 5/24/00 is the correct
+ * response to a request to close the tray if the
+ * drive doesn't have that capability.
+ * cdrom_log_sense() knows this!
+ */
} else if (!(rq->cmd_flags & REQ_QUIET)) {
/* Otherwise, print an error. */
ide_dump_status(drive, "packet command error", stat);
if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && hwif->err_stops_fifo == 0)
try_to_flush_leftover_data(drive);
+ if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) {
+ ide_kill_rq(drive, rq);
+ return ide_stopped;
+ }
+
if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT))
- /* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG);
+ rq->errors |= ERROR_RESET;
- if (rq->errors >= ERROR_MAX || blk_noretry_request(rq))
- ide_kill_rq(drive, rq);
- else {
- if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
- ++rq->errors;
- return ide_do_reset(drive);
- }
- if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
- drive->special.b.recalibrate = 1;
+ if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
++rq->errors;
+ return ide_do_reset(drive);
}
+
+ if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
+ drive->special.b.recalibrate = 1;
+
+ ++rq->errors;
+
return ide_stopped;
}
if (!drive->special.all) {
ide_driver_t *drv;
+ /*
+ * We reset the drive so we need to issue a SETFEATURES.
+ * Do it _after_ do_special() restored device parameters.
+ */
+ if (drive->current_speed == 0xff)
+ ide_config_drive_speed(drive, drive->desired_speed);
+
if (rq->cmd_type == REQ_TYPE_ATA_CMD ||
rq->cmd_type == REQ_TYPE_ATA_TASK ||
rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
#endif
/* so that ide_timer_expiry knows what to do */
hwgroup->sleeping = 1;
+ hwgroup->req_gen_timer = hwgroup->req_gen;
mod_timer(&hwgroup->timer, sleep);
/* we purposely leave hwgroup->busy==1
* while sleeping */
spin_lock_irqsave(&ide_lock, flags);
- if ((handler = hwgroup->handler) == NULL) {
+ if (((handler = hwgroup->handler) == NULL) ||
+ (hwgroup->req_gen != hwgroup->req_gen_timer)) {
/*
* Either a marginal timeout occurred
* (got the interrupt just as timer expired),
if ((wait = expiry(drive)) > 0) {
/* reset timer */
hwgroup->timer.expires = jiffies + wait;
+ hwgroup->req_gen_timer = hwgroup->req_gen;
add_timer(&hwgroup->timer);
spin_unlock_irqrestore(&ide_lock, flags);
return;
printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
}
hwgroup->handler = NULL;
+ hwgroup->req_gen++;
del_timer(&hwgroup->timer);
spin_unlock(&ide_lock);
if(!(drive->id->hw_config & 0x4000))
return 0;
#endif /* CONFIG_IDEDMA_IVB */
- if (!(drive->id->hw_config & 0x2000))
- return 0;
+ /*
+ * FIXME:
+ * - change master/slave IDENTIFY order
+ * - force bit13 (80c cable present) check
+ * (unless the slave device is pre-ATA3)
+ */
return 1;
}
hwgroup->handler = handler;
hwgroup->expiry = expiry;
hwgroup->timer.expires = jiffies + timeout;
+ hwgroup->req_gen_timer = hwgroup->req_gen;
add_timer(&hwgroup->timer);
}
hwgroup->handler = handler;
hwgroup->expiry = expiry;
hwgroup->timer.expires = jiffies + timeout;
+ hwgroup->req_gen_timer = hwgroup->req_gen;
add_timer(&hwgroup->timer);
hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG);
/* Drive takes 400nS to respond, we must avoid the IRQ being
if (HWIF(drive)->pre_reset != NULL)
HWIF(drive)->pre_reset(drive);
+ if (drive->current_speed != 0xff)
+ drive->desired_speed = drive->current_speed;
+ drive->current_speed = 0xff;
}
/*
static int set_using_dma (ide_drive_t *drive, int arg)
{
#ifdef CONFIG_BLK_DEV_IDEDMA
+ ide_hwif_t *hwif = drive->hwif;
+ int err = -EPERM;
+
if (!drive->id || !(drive->id->capability & 1))
- return -EPERM;
- if (HWIF(drive)->ide_dma_check == NULL)
- return -EPERM;
+ goto out;
+
+ if (hwif->ide_dma_check == NULL)
+ goto out;
+
+ err = -EBUSY;
+ if (ide_spin_wait_hwgroup(drive))
+ goto out;
+ /*
+ * set ->busy flag, unlock and let it ride
+ */
+ hwif->hwgroup->busy = 1;
+ spin_unlock_irq(&ide_lock);
+
+ err = 0;
+
if (arg) {
- if (ide_set_dma(drive))
- return -EIO;
- if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
+ if (ide_set_dma(drive) || hwif->ide_dma_on(drive))
+ err = -EIO;
} else
ide_dma_off(drive);
- return 0;
+
+ /*
+ * lock, clear ->busy flag and unlock before leaving
+ */
+ spin_lock_irq(&ide_lock);
+ hwif->hwgroup->busy = 0;
+ spin_unlock_irq(&ide_lock);
+out:
+ return err;
#else
return -EPERM;
#endif
return "tape";
case ide_floppy:
return "floppy";
+ case ide_optical:
+ return "optical";
default:
return "UNKNOWN";
}
static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.01 Dec 23, 2006
+ * linux/drivers/ide/pci/hpt366.c Version 1.02 Apr 18, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2006 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2007 MontaVista Software, Inc.
*
* Thanks to HighPoint Technologies for their assistance, and hardware.
* Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
.chip_type = HPT302N,
.max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3,
.dpll_clk = 77,
+ .settings = hpt37x_settings
};
static struct hpt_info hpt371n __devinitdata = {
printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
}
- if (drive->media != ide_disk)
+ if (drive->media != ide_disk && drive->media != ide_cdrom)
return 0;
if (id->capability & 4) {
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+ hwif->atapi_dma = 1;
hwif->ultra_mask = 0x7f;
hwif->mwdma_mask = 0x07;
tristate "OHCI-DV I/O support (deprecated)"
depends on IEEE1394 && IEEE1394_OHCI1394
help
- The dv1394 driver will be removed from Linux in a future release.
- Its functionality is now provided by raw1394 together with libraries
- such as libiec61883.
+ The dv1394 driver is unsupported and may be removed from Linux in a
+ future release. Its functionality is now provided by raw1394 together
+ with libraries such as libiec61883.
config IEEE1394_RAWIO
tristate "Raw IEEE1394 I/O support"
int ret;
printk(KERN_WARNING
- "WARNING: The dv1394 driver is unsupported and will be removed "
- "from Linux soon. Use raw1394 instead.\n");
+ "NOTE: The dv1394 driver is unsupported and may be removed in a "
+ "future Linux release. Use raw1394 instead.\n");
cdev_init(&dv1394_cdev, &dv1394_fops);
dv1394_cdev.owner = THIS_MODULE;
}
SET_MODULE_OWNER(dev);
+#if 0
+ /* FIXME - Is this the correct parent device anyway? */
SET_NETDEV_DEV(dev, &host->device);
+#endif
priv = netdev_priv(dev);
u64 sge_cmd, ctx0, ctx1;
u64 base_addr;
struct t3_modify_qp_wr *wqe;
- struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_KERNEL);
-
+ struct sk_buff *skb;
+ skb = alloc_skb(sizeof(*wqe), GFP_KERNEL);
if (!skb) {
PDBG("%s alloc_skb failed\n", __FUNCTION__);
return -ENOMEM;
err = cxio_hal_init_ctrl_cq(rdev_p);
if (err) {
PDBG("%s err %d initializing ctrl_cq\n", __FUNCTION__, err);
- return err;
+ goto err;
}
rdev_p->ctrl_qp.workq = dma_alloc_coherent(
&(rdev_p->rnic_info.pdev->dev),
GFP_KERNEL);
if (!rdev_p->ctrl_qp.workq) {
PDBG("%s dma_alloc_coherent failed\n", __FUNCTION__);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err;
}
pci_unmap_addr_set(&rdev_p->ctrl_qp, mapping,
rdev_p->ctrl_qp.dma_addr);
rdev_p->ctrl_qp.workq, 1 << T3_CTRL_QP_SIZE_LOG2);
skb->priority = CPL_PRIORITY_CONTROL;
return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb));
+err:
+ kfree_skb(skb);
+ return err;
}
static int cxio_hal_destroy_ctrl_qp(struct cxio_rdev *rdev_p)
return 0;
}
+static int set_tcb_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
+{
+ struct cpl_set_tcb_rpl *rpl = cplhdr(skb);
+
+ if (rpl->status != CPL_ERR_NONE) {
+ printk(KERN_ERR MOD "Unexpected SET_TCB_RPL status %u "
+ "for tid %u\n", rpl->status, GET_TID(rpl));
+ }
+ return CPL_RET_BUF_DONE;
+}
+
int __init iwch_cm_init(void)
{
skb_queue_head_init(&rxq);
t3c_handlers[CPL_ABORT_REQ_RSS] = sched;
t3c_handlers[CPL_RDMA_TERMINATE] = sched;
t3c_handlers[CPL_RDMA_EC_STATUS] = sched;
+ t3c_handlers[CPL_SET_TCB_RPL] = set_tcb_rpl;
/*
* These are the real handlers that are called from a
php = to_iwch_pd(pd);
if (mr_rereg_mask & IB_MR_REREG_ACCESS)
mh.attr.perms = iwch_ib_to_tpt_access(acc);
- if (mr_rereg_mask & IB_MR_REREG_TRANS)
+ if (mr_rereg_mask & IB_MR_REREG_TRANS) {
ret = build_phys_page_list(buffer_list, num_phys_buf,
iova_start,
&total_size, &npages,
&shift, &page_list);
+ if (ret)
+ return ret;
+ }
ret = iwch_reregister_mem(rhp, php, &mh, shift, page_list, npages);
kfree(page_list);
static void queue_comp_task(struct ehca_cq *__cq);
static struct ehca_comp_pool* pool;
+#ifdef CONFIG_HOTPLUG_CPU
static struct notifier_block comp_pool_callback_nb;
+#endif
static inline void comp_event_callback(struct ehca_cq *cq)
{
}
+#ifdef CONFIG_HOTPLUG_CPU
static int comp_pool_callback(struct notifier_block *nfb,
unsigned long action,
void *hcpu)
return NOTIFY_OK;
}
+#endif
int ehca_create_comp_pool(void)
{
}
}
+#ifdef CONFIG_HOTPLUG_CPU
comp_pool_callback_nb.notifier_call = comp_pool_callback;
comp_pool_callback_nb.priority =0;
register_cpu_notifier(&comp_pool_callback_nb);
+#endif
printk(KERN_INFO "eHCA scaling code enabled\n");
if (!ehca_scaling_code)
return;
+#ifdef CONFIG_HOTPLUG_CPU
unregister_cpu_notifier(&comp_pool_callback_nb);
+#endif
for (i = 0; i < NR_CPUS; i++) {
if (cpu_online(i))
return ret;
}
-static void remove_file(struct dentry *parent, char *name)
+static int remove_file(struct dentry *parent, char *name)
{
struct dentry *tmp;
+ int ret;
tmp = lookup_one_len(name, parent, strlen(name));
+ if (IS_ERR(tmp)) {
+ ret = PTR_ERR(tmp);
+ goto bail;
+ }
+
spin_lock(&dcache_lock);
spin_lock(&tmp->d_lock);
if (!(d_unhashed(tmp) && tmp->d_inode)) {
spin_unlock(&tmp->d_lock);
spin_unlock(&dcache_lock);
}
+
+ ret = 0;
+bail:
+ /*
+ * We don't expect clients to care about the return value, but
+ * it's there if they need it.
+ */
+ return ret;
}
static int remove_device_files(struct super_block *sb,
key = arbel_key_to_hw_index(fmr->ibmr.lkey);
key &= dev->limits.num_mpts - 1;
+ key = adjust_key(dev, key);
fmr->ibmr.lkey = fmr->ibmr.rkey = arbel_hw_index_to_key(key);
fmr->maps = 0;
}
mpts = mtts = 1 << i;
} else {
- mpts = dev->limits.num_mtt_segs;
- mtts = dev->limits.num_mpts;
+ mtts = dev->limits.num_mtt_segs;
+ mpts = dev->limits.num_mpts;
}
if (!mthca_is_memfree(dev) &&
skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
mapping[i + 1] = ib_dma_map_page(priv->ca, skb_shinfo(skb)->frags[i].page,
- 0, PAGE_SIZE, DMA_TO_DEVICE);
+ 0, PAGE_SIZE, DMA_FROM_DEVICE);
if (unlikely(ib_dma_mapping_error(priv->ca, mapping[i + 1])))
goto partial_error;
}
skb->len, tx->mtu);
++priv->stats.tx_dropped;
++priv->stats.tx_errors;
- ipoib_cm_skb_too_long(dev, skb, tx->mtu - INFINIBAND_ALEN);
+ ipoib_cm_skb_too_long(dev, skb, tx->mtu - IPOIB_ENCAP_LEN);
return;
}
/* List if sorted by LRU, start from tail,
* stop when we see a recently used entry */
p = list_entry(priv->cm.passive_ids.prev, typeof(*p), list);
- if (time_after_eq(jiffies, p->jiffies + IPOIB_CM_RX_TIMEOUT))
+ if (time_before_eq(jiffies, p->jiffies + IPOIB_CM_RX_TIMEOUT))
break;
list_del_init(&p->list);
spin_unlock_irqrestore(&priv->lock, flags);
struct ipoib_tx_buf *tx_req;
u64 addr;
- if (unlikely(skb->len > priv->mcast_mtu + INFINIBAND_ALEN)) {
+ if (unlikely(skb->len > priv->mcast_mtu + IPOIB_ENCAP_LEN)) {
ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
- skb->len, priv->mcast_mtu + INFINIBAND_ALEN);
+ skb->len, priv->mcast_mtu + IPOIB_ENCAP_LEN);
++priv->stats.tx_dropped;
++priv->stats.tx_errors;
ipoib_cm_skb_too_long(dev, skb, priv->mcast_mtu);
struct net_device *dev = path->dev;
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_ah *ah = NULL;
- struct ipoib_neigh *neigh;
+ struct ipoib_neigh *neigh, *tn;
struct sk_buff_head skqueue;
struct sk_buff *skb;
unsigned long flags;
while ((skb = __skb_dequeue(&path->queue)))
__skb_queue_tail(&skqueue, skb);
- list_for_each_entry(neigh, &path->neigh_list, list) {
+ list_for_each_entry_safe(neigh, tn, &path->neigh_list, list) {
kref_get(&path->ah->ref);
neigh->ah = path->ah;
memcpy(&neigh->dgid.raw, &path->pathrec.dgid.raw,
queue_work(ipoib_workqueue, &priv->restart_task);
}
-static void ipoib_neigh_destructor(struct neighbour *n)
+static void ipoib_neigh_cleanup(struct neighbour *n)
{
struct ipoib_neigh *neigh;
struct ipoib_dev_priv *priv = netdev_priv(n->dev);
struct ipoib_ah *ah = NULL;
ipoib_dbg(priv,
- "neigh_destructor for %06x " IPOIB_GID_FMT "\n",
+ "neigh_cleanup for %06x " IPOIB_GID_FMT "\n",
IPOIB_QPN(n->ha),
IPOIB_GID_RAW_ARG(n->ha + 4));
static int ipoib_neigh_setup_dev(struct net_device *dev, struct neigh_parms *parms)
{
- parms->neigh_destructor = ipoib_neigh_destructor;
+ parms->neigh_cleanup = ipoib_neigh_cleanup;
return 0;
}
struct ipoib_dev_priv *priv = netdev_priv(dev);
int ret = 0;
+ if (test_and_clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags))
+ ib_sa_free_multicast(mcast->mc);
+
if (test_and_clear_bit(IPOIB_MCAST_FLAG_ATTACHED, &mcast->flags)) {
ipoib_dbg_mcast(priv, "leaving MGID " IPOIB_GID_FMT "\n",
IPOIB_GID_ARG(mcast->mcmember.mgid));
ipoib_warn(priv, "ipoib_mcast_detach failed (result = %d)\n", ret);
}
- if (test_and_clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags))
- ib_sa_free_multicast(mcast->mc);
-
return 0;
}
wait_queue_head_t wait; /* waitq for conn/disconn */
atomic_t post_recv_buf_count; /* posted rx count */
atomic_t post_send_buf_count; /* posted tx count */
- struct work_struct comperror_work; /* conn term sleepable ctx*/
char name[ISER_OBJECT_NAME_SIZE];
struct iser_page_vec *page_vec; /* represents SG to fmr maps*
* maps serialized as tx is*/
{
int deferred;
int is_rdma_aligned = 1;
+ struct iser_regd_buf *regd;
/* if we were reading, copy back to unaligned sglist,
* anyway dma_unmap and free the copy
}
if (iser_ctask->dir[ISER_DIR_IN]) {
- deferred = iser_regd_buff_release
- (&iser_ctask->rdma_regd[ISER_DIR_IN]);
+ regd = &iser_ctask->rdma_regd[ISER_DIR_IN];
+ deferred = iser_regd_buff_release(regd);
if (deferred) {
- iser_err("References remain for BUF-IN rdma reg\n");
- BUG();
+ iser_err("%d references remain for BUF-IN rdma reg\n",
+ atomic_read(®d->ref_count));
}
}
if (iser_ctask->dir[ISER_DIR_OUT]) {
- deferred = iser_regd_buff_release
- (&iser_ctask->rdma_regd[ISER_DIR_OUT]);
+ regd = &iser_ctask->rdma_regd[ISER_DIR_OUT];
+ deferred = iser_regd_buff_release(regd);
if (deferred) {
- iser_err("References remain for BUF-OUT rdma reg\n");
- BUG();
+ iser_err("%d references remain for BUF-OUT rdma reg\n",
+ atomic_read(®d->ref_count));
}
}
static void iser_cq_tasklet_fn(unsigned long data);
static void iser_cq_callback(struct ib_cq *cq, void *cq_context);
-static void iser_comp_error_worker(struct work_struct *work);
static void iser_cq_event_callback(struct ib_event *cause, void *context)
{
init_waitqueue_head(&ib_conn->wait);
atomic_set(&ib_conn->post_recv_buf_count, 0);
atomic_set(&ib_conn->post_send_buf_count, 0);
- INIT_WORK(&ib_conn->comperror_work, iser_comp_error_worker);
INIT_LIST_HEAD(&ib_conn->conn_list);
spin_lock_init(&ib_conn->lock);
return ret_val;
}
-static void iser_comp_error_worker(struct work_struct *work)
-{
- struct iser_conn *ib_conn =
- container_of(work, struct iser_conn, comperror_work);
-
- /* getting here when the state is UP means that the conn is being *
- * terminated asynchronously from the iSCSI layer's perspective. */
- if (iser_conn_state_comp_exch(ib_conn, ISER_CONN_UP,
- ISER_CONN_TERMINATING))
- iscsi_conn_failure(ib_conn->iser_conn->iscsi_conn,
- ISCSI_ERR_CONN_FAILED);
-
- /* complete the termination process if disconnect event was delivered *
- * note there are no more non completed posts to the QP */
- if (ib_conn->disc_evt_flag) {
- ib_conn->state = ISER_CONN_DOWN;
- wake_up_interruptible(&ib_conn->wait);
- }
-}
-
static void iser_handle_comp_error(struct iser_desc *desc)
{
struct iser_dto *dto = &desc->dto;
}
if (atomic_read(&ib_conn->post_recv_buf_count) == 0 &&
- atomic_read(&ib_conn->post_send_buf_count) == 0)
- schedule_work(&ib_conn->comperror_work);
+ atomic_read(&ib_conn->post_send_buf_count) == 0) {
+ /* getting here when the state is UP means that the conn is *
+ * being terminated asynchronously from the iSCSI layer's *
+ * perspective. */
+ if (iser_conn_state_comp_exch(ib_conn, ISER_CONN_UP,
+ ISER_CONN_TERMINATING))
+ iscsi_conn_failure(ib_conn->iser_conn->iscsi_conn,
+ ISCSI_ERR_CONN_FAILED);
+
+ /* complete the termination process if disconnect event was delivered *
+ * note there are no more non completed posts to the QP */
+ if (ib_conn->disc_evt_flag) {
+ ib_conn->state = ISER_CONN_DOWN;
+ wake_up_interruptible(&ib_conn->wait);
+ }
+ }
}
static void iser_cq_tasklet_fn(unsigned long data)
}
static struct device_driver ucb1400_ts_driver = {
+ .name = "ucb1400_ts",
.owner = THIS_MODULE,
.bus = &ac97_bus_type,
.probe = ucb1400_ts_probe,
#define USB_SX353_PRODUCT_ID 0x0022
/* table of devices that work with this driver */
-static struct usb_device_id gigaset_table [] = {
+static const struct usb_device_id gigaset_table [] = {
{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
gigaset_unassign(cs);
}
-static struct gigaset_ops gigops = {
+static const struct gigaset_ops gigops = {
gigaset_write_cmd,
gigaset_write_room,
gigaset_chars_in_buffer,
struct cardstate *gigaset_get_cs_by_id(int id)
{
unsigned long flags;
- static struct cardstate *ret = NULL;
- static struct cardstate *cs;
+ struct cardstate *ret = NULL;
+ struct cardstate *cs;
struct gigaset_driver *drv;
unsigned i;
static struct cardstate *gigaset_get_cs_by_minor(unsigned minor)
{
unsigned long flags;
- static struct cardstate *ret = NULL;
+ struct cardstate *ret = NULL;
struct gigaset_driver *drv;
unsigned index;
};
#endif
-static struct resp_type_t resp_type[]=
+static const struct resp_type_t resp_type[] =
{
/*{"", RSP_EMPTY, RT_NOTHING},*/
{"OK", RSP_OK, RT_NOTHING},
unsigned char *argv[MAX_REC_PARAMS + 1];
int params;
int i, j;
- struct resp_type_t *rt;
+ const struct resp_type_t *rt;
int curarg;
unsigned long flags;
unsigned next, tail, head;
* bit 12..10 = number of trailing '1' bits in result
* bit 14..13 = number of bits added by stuffing
*/
-static u16 stufftab[5 * 256] = {
+static const u16 stufftab[5 * 256] = {
// previous 1s = 0:
0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x201f,
* (replacing 8 by 7 to make it fit; the algorithm won't care)
* bit 7 set if there are 5 or more "interior" consecutive '1' bits
*/
-static unsigned char bitcounts[256] = {
+static const unsigned char bitcounts[256] = {
0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x04,
0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x05,
0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x04,
return -EINVAL;
}
-static struct gigaset_ops ops = {
+static const struct gigaset_ops ops = {
gigaset_write_cmd,
gigaset_write_room,
gigaset_chars_in_buffer,
#define USB_M105_PRODUCT_ID 0x0009
/* table of devices that work with this driver */
-static struct usb_device_id gigaset_table [] = {
+static const struct usb_device_id gigaset_table [] = {
{ USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
{ } /* Terminating entry */
};
gigaset_unassign(cs);
}
-static struct gigaset_ops ops = {
+static const struct gigaset_ops ops = {
gigaset_write_cmd,
gigaset_write_room,
gigaset_chars_in_buffer,
{
struct BCState *bcs = container_of(work, struct BCState, tqueue);
- BChannel_bh(bcs);
+ BChannel_bh(work);
if (test_and_clear_bit(B_LL_NOCARRIER, &bcs->event))
ll_deliver_faxstat(bcs, ISDN_FAX_CLASS1_NOCARR);
if (test_and_clear_bit(B_LL_CONNECT, &bcs->event))
* and zap two pdes instead of one.
*/
if (level == PT32_ROOT_LEVEL) {
+ page_offset &= ~7; /* kill rounding error */
page_offset <<= 1;
npte = 2;
}
{
struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
- if (vmcs_readl(sf->base) == save->base) {
+ if (vmcs_readl(sf->base) == save->base && (save->base & AR_S_MASK)) {
vmcs_write16(sf->selector, save->selector);
vmcs_writel(sf->base, save->base);
vmcs_write32(sf->limit, save->limit);
[cr2]"i"(offsetof(struct kvm_vcpu, cr2))
: "cc", "memory" );
+ /*
+ * Reload segment selectors ASAP. (it's needed for a functional
+ * kernel: x86 relies on having __KERNEL_PDA in %fs and x86_64
+ * relies on having 0 in %gs for the CPU PDA to work.)
+ */
+ if (fs_gs_ldt_reload_needed) {
+ load_ldt(ldt_sel);
+ load_fs(fs_sel);
+ /*
+ * If we have to reload gs, we must take care to
+ * preserve our gs base.
+ */
+ local_irq_disable();
+ load_gs(gs_sel);
+#ifdef CONFIG_X86_64
+ wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE));
+#endif
+ local_irq_enable();
+
+ reload_tss();
+ }
++kvm_stat.exits;
save_msrs(vcpu->guest_msrs, NR_BAD_MSRS);
kvm_run->exit_reason = vmcs_read32(VM_INSTRUCTION_ERROR);
r = 0;
} else {
- if (fs_gs_ldt_reload_needed) {
- load_ldt(ldt_sel);
- load_fs(fs_sel);
- /*
- * If we have to reload gs, we must take care to
- * preserve our gs base.
- */
- local_irq_disable();
- load_gs(gs_sel);
-#ifdef CONFIG_X86_64
- wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE));
-#endif
- local_irq_enable();
-
- reload_tss();
- }
/*
* Profile KVM exit RIPs:
*/
set_current_state(TASK_UNINTERRUPTIBLE);
if (pp->cmd.status != 1)
break;
- spin_lock_irqsave(&pp->lock, flags);
- schedule();
spin_unlock_irqrestore(&pp->lock, flags);
+ schedule();
+ spin_lock_irqsave(&pp->lock, flags);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&pp->wait, &wait);
/* We need 4 bits per page, rounded up to a multiple of sizeof(unsigned long) */
bitmap->filemap_attr = kzalloc(
- (((num_pages*4/8)+sizeof(unsigned long)-1)
- /sizeof(unsigned long))
- *sizeof(unsigned long),
+ roundup( DIV_ROUND_UP(num_pages*4, 8), sizeof(unsigned long)),
GFP_KERNEL);
if (!bitmap->filemap_attr)
goto out;
char b[BDEVNAME_SIZE];
struct kobject *ko;
char *s;
+ int err;
if (rdev->mddev) {
MD_BUG();
while ( (s=strchr(rdev->kobj.k_name, '/')) != NULL)
*s = '!';
- list_add(&rdev->same_set, &mddev->disks);
rdev->mddev = mddev;
printk(KERN_INFO "md: bind<%s>\n", b);
rdev->kobj.parent = &mddev->kobj;
- kobject_add(&rdev->kobj);
+ if ((err = kobject_add(&rdev->kobj)))
+ goto fail;
if (rdev->bdev->bd_part)
ko = &rdev->bdev->bd_part->kobj;
else
ko = &rdev->bdev->bd_disk->kobj;
- sysfs_create_link(&rdev->kobj, ko, "block");
+ if ((err = sysfs_create_link(&rdev->kobj, ko, "block"))) {
+ kobject_del(&rdev->kobj);
+ goto fail;
+ }
+ list_add(&rdev->same_set, &mddev->disks);
bd_claim_by_disk(rdev->bdev, rdev, mddev->gendisk);
return 0;
+
+ fail:
+ printk(KERN_WARNING "md: failed to register dev-%s for %s\n",
+ b, mdname(mddev));
+ return err;
+}
+
+static void delayed_delete(struct work_struct *ws)
+{
+ mdk_rdev_t *rdev = container_of(ws, mdk_rdev_t, del_work);
+ kobject_del(&rdev->kobj);
}
static void unbind_rdev_from_array(mdk_rdev_t * rdev)
printk(KERN_INFO "md: unbind<%s>\n", bdevname(rdev->bdev,b));
rdev->mddev = NULL;
sysfs_remove_link(&rdev->kobj, "block");
- kobject_del(&rdev->kobj);
+
+ /* We need to delay this, otherwise we can deadlock when
+ * writing to 'remove' to "dev/state"
+ */
+ INIT_WORK(&rdev->del_work, delayed_delete);
+ schedule_work(&rdev->del_work);
}
/*
mddev->kobj.k_name = NULL;
snprintf(mddev->kobj.name, KOBJ_NAME_LEN, "%s", "md");
mddev->kobj.ktype = &md_ktype;
- kobject_register(&mddev->kobj);
+ if (kobject_register(&mddev->kobj))
+ printk(KERN_WARNING "md: cannot register %s/md - name in use\n",
+ disk->disk_name);
return NULL;
}
bitmap_destroy(mddev);
return err;
}
- if (mddev->pers->sync_request)
- sysfs_create_group(&mddev->kobj, &md_redundancy_group);
- else if (mddev->ro == 2) /* auto-readonly not meaningful */
+ if (mddev->pers->sync_request) {
+ if (sysfs_create_group(&mddev->kobj, &md_redundancy_group))
+ printk(KERN_WARNING
+ "md: cannot register extra attributes for %s\n",
+ mdname(mddev));
+ } else if (mddev->ro == 2) /* auto-readonly not meaningful */
mddev->ro = 0;
atomic_set(&mddev->writes_pending,0);
if (rdev->raid_disk >= 0) {
char nm[20];
sprintf(nm, "rd%d", rdev->raid_disk);
- sysfs_create_link(&mddev->kobj, &rdev->kobj, nm);
+ if (sysfs_create_link(&mddev->kobj, &rdev->kobj, nm))
+ printk("md: cannot register %s for %s\n",
+ nm, mdname(mddev));
}
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->issue_flush_fn = NULL;
+ mddev->queue->backing_dev_info.congested_fn = NULL;
if (mddev->pers->sync_request)
sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
sysfs_remove_link(&mddev->kobj, nm);
}
+ /* make sure all delayed_delete calls have finished */
+ flush_scheduled_work();
+
export_array(mddev);
mddev->array_size = 0;
if (mddev->pers->hot_add_disk(mddev,rdev)) {
char nm[20];
sprintf(nm, "rd%d", rdev->raid_disk);
- sysfs_create_link(&mddev->kobj,
- &rdev->kobj, nm);
+ if (sysfs_create_link(&mddev->kobj,
+ &rdev->kobj, nm))
+ printk(KERN_WARNING
+ "md: cannot register "
+ "%s for %s\n",
+ nm, mdname(mddev));
spares++;
md_new_event(mddev);
} else
}
/* Ok, everything is just fine now */
- sysfs_create_group(&mddev->kobj, &raid5_attrs_group);
+ if (sysfs_create_group(&mddev->kobj, &raid5_attrs_group))
+ printk(KERN_WARNING
+ "raid5: failed to create sysfs attributes for %s\n",
+ mdname(mddev));
mddev->queue->unplug_fn = raid5_unplug_device;
mddev->queue->issue_flush_fn = raid5_issue_flush;
- mddev->queue->backing_dev_info.congested_fn = raid5_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
+ mddev->queue->backing_dev_info.congested_fn = raid5_congested;
mddev->array_size = mddev->size * (conf->previous_raid_disks -
conf->max_degraded);
mddev->thread = NULL;
shrink_stripes(conf);
kfree(conf->stripe_hashtbl);
+ mddev->queue->backing_dev_info.congested_fn = NULL;
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
kfree(conf->disks);
added_devices++;
rdev->recovery_offset = 0;
sprintf(nm, "rd%d", rdev->raid_disk);
- sysfs_create_link(&mddev->kobj, &rdev->kobj, nm);
+ if (sysfs_create_link(&mddev->kobj,
+ &rdev->kobj, nm))
+ printk(KERN_WARNING
+ "raid5: failed to create "
+ " link %s for %s\n",
+ nm, mdname(mddev));
} else
break;
}
.spare_active = raid5_spare_active,
.sync_request = sync_request,
.resize = raid5_resize,
+#ifdef CONFIG_MD_RAID5_RESHAPE
+ .check_reshape = raid5_check_reshape,
+ .start_reshape = raid5_start_reshape,
+#endif
.quiesce = raid5_quiesce,
};
tv.tv_usec - ir->base_time.tv_usec;
}
- /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
+ /* signal we're ready to start a new code */
+ ir->active = 0;
+
+ /* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
if (gap < 28000) {
dprintk(1, "ir-common: spurious timer_end\n");
return;
}
- ir->active = 0;
if (ir->last_bit < 20) {
/* ignore spurious codes (caused by light/other remotes) */
dprintk(1, "ir-common: short code: %x\n", ir->code);
struct dvb_device *dvbdev = file->private_data;
struct dmxdev *dmxdev = dvbdev->priv;
- if (mutex_lock_interruptible(&dmxdev->mutex))
- return -ERESTARTSYS;
+ mutex_lock(&dmxdev->mutex);
if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
dmxdev->demux->disconnect_frontend(dmxdev->demux);
static int dvb_dmxdev_filter_free(struct dmxdev *dmxdev,
struct dmxdev_filter *dmxdevfilter)
{
- if (mutex_lock_interruptible(&dmxdev->mutex))
- return -ERESTARTSYS;
-
- if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
- mutex_unlock(&dmxdev->mutex);
- return -ERESTARTSYS;
- }
+ mutex_lock(&dmxdev->mutex);
+ mutex_lock(&dmxdevfilter->mutex);
dvb_dmxdev_filter_stop(dmxdevfilter);
dvb_dmxdev_filter_reset(dmxdevfilter);
struct dvb_demux *demux = feed->demux;
int ret;
- if (mutex_lock_interruptible(&demux->mutex))
- return -ERESTARTSYS;
+ mutex_lock(&demux->mutex);
if (feed->state < DMX_STATE_GO) {
mutex_unlock(&demux->mutex);
struct dvb_demux *demux = (struct dvb_demux *)dmx;
struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed;
- if (mutex_lock_interruptible(&demux->mutex))
- return -ERESTARTSYS;
+ mutex_lock(&demux->mutex);
if (feed->state == DMX_STATE_FREE) {
mutex_unlock(&demux->mutex);
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
int ret;
- if (mutex_lock_interruptible(&dvbdmx->mutex))
- return -ERESTARTSYS;
+ mutex_lock(&dvbdmx->mutex);
if (!dvbdmx->stop_feed) {
mutex_unlock(&dvbdmx->mutex);
struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
- if (mutex_lock_interruptible(&dvbdmx->mutex))
- return -ERESTARTSYS;
+ mutex_lock(&dvbdmx->mutex);
if (dvbdmxfilter->feed != dvbdmxfeed) {
mutex_unlock(&dvbdmx->mutex);
struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
struct dvb_demux *dvbdmx = (struct dvb_demux *)demux;
- if (mutex_lock_interruptible(&dvbdmx->mutex))
- return -ERESTARTSYS;
+ mutex_lock(&dvbdmx->mutex);
if (dvbdmxfeed->state == DMX_STATE_FREE) {
mutex_unlock(&dvbdmx->mutex);
if (demux->frontend)
return -EINVAL;
- if (mutex_lock_interruptible(&dvbdemux->mutex))
- return -ERESTARTSYS;
+ mutex_lock(&dvbdemux->mutex);
demux->frontend = frontend;
mutex_unlock(&dvbdemux->mutex);
{
struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
- if (mutex_lock_interruptible(&dvbdemux->mutex))
- return -ERESTARTSYS;
+ mutex_lock(&dvbdemux->mutex);
demux->frontend = NULL;
mutex_unlock(&dvbdemux->mutex);
int id;
- if (mutex_lock_interruptible(&dvbdev_register_lock))
- return -ERESTARTSYS;
+ mutex_lock(&dvbdev_register_lock);
if ((id = dvbdev_get_free_id (adap, type)) < 0){
mutex_unlock(&dvbdev_register_lock);
{
int num;
- if (mutex_lock_interruptible(&dvbdev_register_lock))
- return -ERESTARTSYS;
+ mutex_lock(&dvbdev_register_lock);
if ((num = dvbdev_get_free_adapter_num ()) < 0) {
mutex_unlock(&dvbdev_register_lock);
int dvb_unregister_adapter(struct dvb_adapter *adap)
{
- if (mutex_lock_interruptible(&dvbdev_register_lock))
- return -ERESTARTSYS;
+ mutex_lock(&dvbdev_register_lock);
list_del (&adap->list_head);
mutex_unlock(&dvbdev_register_lock);
return 0;
return -ENOMEM;
input_dev->evbit[0] = BIT(EV_KEY);
- input_dev->keycodesize = sizeof(unsigned char);
- input_dev->keycodemax = KEY_MAX;
input_dev->name = "IR-receiver inside an USB DVB receiver";
input_dev->phys = d->rc_phys;
usb_to_input_id(d->udev, &input_dev->id);
/* detect if it is present or not */
if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) {
kfree(isl6421);
+ fe->sec_priv = NULL;
return NULL;
}
/* set input */
if (state->config->set_pll_input)
- state->config->set_pll_input(buf, 1);
+ state->config->set_pll_input(buf+1, 1);
break;
case VSB_8:
/* Set non-punctured clock for VSB */
/* set input */
if (state->config->set_pll_input)
- state->config->set_pll_input(buf, 0);
+ state->config->set_pll_input(buf+1, 0);
break;
default:
return -EINVAL;
for(i=0; i< cmd->msg_len; i++) {
tda10086_write_byte(state, 0x48+i, cmd->msg[i]);
}
- tda10086_write_byte(state, 0x36, 0x08 | ((cmd->msg_len + 1) << 4));
+ tda10086_write_byte(state, 0x36, 0x08 | ((cmd->msg_len - 1) << 4));
tda10086_diseqc_wait(state);
writel(val, &pluto->io_mem[reg]);
}
+static void pluto_write_tscr(struct pluto *pluto, u32 val)
+{
+ /* set the number of packets */
+ val &= ~TSCR_ADEF;
+ val |= TS_DMA_PACKETS / 2;
+
+ pluto_writereg(pluto, REG_TSCR, val);
+}
+
static void pluto_setsda(void *data, int state)
{
struct pluto *pluto = data;
if (val & TSCR_RSTN) {
val &= ~TSCR_RSTN;
- pluto_writereg(pluto, REG_TSCR, val);
+ pluto_write_tscr(pluto, val);
}
if (reenable) {
val |= TSCR_RSTN;
- pluto_writereg(pluto, REG_TSCR, val);
+ pluto_write_tscr(pluto, val);
}
}
}
/* ACK the interrupt */
- pluto_writereg(pluto, REG_TSCR, tscr | TSCR_IACK);
+ pluto_write_tscr(pluto, tscr | TSCR_IACK);
return IRQ_HANDLED;
}
{
u32 val = pluto_readreg(pluto, REG_TSCR);
- /* set the number of packets */
- val &= ~TSCR_ADEF;
- val |= TS_DMA_PACKETS / 2;
/* disable AFUL and LOCK interrupts */
val |= (TSCR_MSKA | TSCR_MSKL);
/* enable DMA and OVERFLOW interrupts */
/* clear pending interrupts */
val |= TSCR_IACK;
- pluto_writereg(pluto, REG_TSCR, val);
+ pluto_write_tscr(pluto, val);
}
static void pluto_disable_irqs(struct pluto *pluto)
/* clear pending interrupts */
val |= TSCR_IACK;
- pluto_writereg(pluto, REG_TSCR, val);
+ pluto_write_tscr(pluto, val);
}
static int __devinit pluto_hw_init(struct pluto *pluto)
#
menu "Radio Adapters"
- depends on VIDEO_DEV!=n
+ depends on VIDEO_DEV
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on PCI && SONYPI && VIDEO_V4L1
+ depends on PCI && SONY_LAPTOP && VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
<file:Documentation/video4linux/meye.txt> for more information.
- If you say Y or M here, you need to say Y or M to "Sony Programmable
- I/O Control Device" in the character device section.
+ If you say Y or M here, you need to say Y or M to "Sony Laptop
+ Extras" in the misc device section.
To compile this driver as a module, choose M here: the
module will be called meye.
if (p->palette != VIDEO_PALETTE_YUV422 && p->palette != VIDEO_PALETTE_YUYV)
return -EINVAL;
mutex_lock(&meye.lock);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERABRIGHTNESS,
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERABRIGHTNESS,
p->brightness >> 10);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERAHUE,
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAHUE,
p->hue >> 10);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERACOLOR,
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACOLOR,
p->colour >> 10);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERACONTRAST,
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACONTRAST,
p->contrast >> 10);
meye.picture = *p;
mutex_unlock(&meye.lock);
meye.params.quality != jp->quality)
mchip_hic_stop(); /* need restart */
meye.params = *jp;
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERASHARPNESS,
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS,
meye.params.sharpness);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERAAGC,
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC,
meye.params.agc);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERAPICTURE,
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE,
meye.params.picture);
mutex_unlock(&meye.lock);
break;
mutex_lock(&meye.lock);
switch (c->id) {
case V4L2_CID_BRIGHTNESS:
- sonypi_camera_command(
- SONYPI_COMMAND_SETCAMERABRIGHTNESS, c->value);
+ sony_pic_camera_command(
+ SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, c->value);
meye.picture.brightness = c->value << 10;
break;
case V4L2_CID_HUE:
- sonypi_camera_command(
- SONYPI_COMMAND_SETCAMERAHUE, c->value);
+ sony_pic_camera_command(
+ SONY_PIC_COMMAND_SETCAMERAHUE, c->value);
meye.picture.hue = c->value << 10;
break;
case V4L2_CID_CONTRAST:
- sonypi_camera_command(
- SONYPI_COMMAND_SETCAMERACONTRAST, c->value);
+ sony_pic_camera_command(
+ SONY_PIC_COMMAND_SETCAMERACONTRAST, c->value);
meye.picture.contrast = c->value << 10;
break;
case V4L2_CID_SATURATION:
- sonypi_camera_command(
- SONYPI_COMMAND_SETCAMERACOLOR, c->value);
+ sony_pic_camera_command(
+ SONY_PIC_COMMAND_SETCAMERACOLOR, c->value);
meye.picture.colour = c->value << 10;
break;
case V4L2_CID_AGC:
- sonypi_camera_command(
- SONYPI_COMMAND_SETCAMERAAGC, c->value);
+ sony_pic_camera_command(
+ SONY_PIC_COMMAND_SETCAMERAAGC, c->value);
meye.params.agc = c->value;
break;
case V4L2_CID_SHARPNESS:
- sonypi_camera_command(
- SONYPI_COMMAND_SETCAMERASHARPNESS, c->value);
+ sony_pic_camera_command(
+ SONY_PIC_COMMAND_SETCAMERASHARPNESS, c->value);
meye.params.sharpness = c->value;
break;
case V4L2_CID_PICTURE:
- sonypi_camera_command(
- SONYPI_COMMAND_SETCAMERAPICTURE, c->value);
+ sony_pic_camera_command(
+ SONY_PIC_COMMAND_SETCAMERAPICTURE, c->value);
meye.params.picture = c->value;
break;
case V4L2_CID_JPEGQUAL:
memcpy(meye.video_dev, &meye_template, sizeof(meye_template));
meye.video_dev->dev = &meye.mchip_dev->dev;
- if ((ret = sonypi_camera_command(SONYPI_COMMAND_SETCAMERA, 1))) {
+ if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
printk(KERN_ERR "meye: unable to power on the camera\n");
printk(KERN_ERR "meye: did you enable the camera in "
"sonypi using the module options ?\n");
meye.params.picture = 0;
meye.params.framerate = 0;
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERABRIGHTNESS, 32);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERAHUE, 32);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERACOLOR, 32);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERACONTRAST, 32);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERASHARPNESS, 32);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERAPICTURE, 0);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERAAGC, 48);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, 32);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAHUE, 32);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACOLOR, 32);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACONTRAST, 32);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS, 32);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, 0);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, 48);
printk(KERN_INFO "meye: Motion Eye Camera Driver v%s.\n",
MEYE_DRIVER_VERSION);
outregions:
pci_disable_device(meye.mchip_dev);
outenabledev:
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERA, 0);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0);
outsonypienable:
kfifo_free(meye.doneq);
outkfifoalloc2:
pci_disable_device(meye.mchip_dev);
- sonypi_camera_command(SONYPI_COMMAND_SETCAMERA, 0);
+ sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0);
kfifo_free(meye.doneq);
kfifo_free(meye.grabq);
/****************************************************************************/
/* Sony Programmable I/O Controller for accessing the camera commands */
-#include <linux/sonypi.h>
+#include <linux/sony-laptop.h>
/* private API definitions */
#include <linux/meye.h>
return 0;
}
-static int msp_suspend(struct device * dev, pm_message_t state)
+static int msp_suspend(struct i2c_client *client, pm_message_t state)
{
- struct i2c_client *client = container_of(dev, struct i2c_client, dev);
v4l_dbg(1, msp_debug, client, "suspend\n");
msp_reset(client);
return 0;
}
-static int msp_resume(struct device * dev)
+static int msp_resume(struct i2c_client *client)
{
- struct i2c_client *client = container_of(dev, struct i2c_client, dev);
v4l_dbg(1, msp_debug, client, "resume\n");
msp_wake_thread(client);
if (msp_reset(client) == -1) {
v4l_dbg(1, msp_debug, client, "msp3400 not found\n");
kfree(client);
- return -1;
+ return 0;
}
state = kmalloc(sizeof(*state), GFP_KERNEL);
v4l_dbg(1, msp_debug, client, "not an msp3400 (cannot read chip version)\n");
kfree(state);
kfree(client);
- return -1;
+ return 0;
}
msp_set_audio(client);
.id = I2C_DRIVERID_MSP3400,
.attach_adapter = msp_probe,
.detach_client = msp_detach,
+ .suspend = msp_suspend,
+ .resume = msp_resume,
.command = msp_command,
.driver = {
.name = "msp3400",
- .suspend = msp_suspend,
- .resume = msp_resume,
},
};
reg |= 0x10;
} else if (std == V4L2_STD_NTSC_M_JP) {
reg |= 0x40;
- } else if (std == V4L2_STD_SECAM) {
+ } else if (std & V4L2_STD_SECAM) {
reg |= 0x50;
}
saa711x_write(client, R_0E_CHROMA_CNTL_1, reg);
return 0;
}
-static int tuner_suspend(struct device *dev, pm_message_t state)
+static int tuner_suspend(struct i2c_client *c, pm_message_t state)
{
- struct i2c_client *c = container_of (dev, struct i2c_client, dev);
struct tuner *t = i2c_get_clientdata (c);
tuner_dbg ("suspend\n");
return 0;
}
-static int tuner_resume(struct device *dev)
+static int tuner_resume(struct i2c_client *c)
{
- struct i2c_client *c = container_of (dev, struct i2c_client, dev);
struct tuner *t = i2c_get_clientdata (c);
tuner_dbg ("resume\n");
.attach_adapter = tuner_probe,
.detach_client = tuner_detach,
.command = tuner_command,
+ .suspend = tuner_suspend,
+ .resume = tuner_resume,
.driver = {
.name = "tuner",
- .suspend = tuner_suspend,
- .resume = tuner_resume,
},
};
static struct i2c_client client_template = {
static int
mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+ MPT_SCSI_HOST *hd;
struct mptsas_target_reset_event *target_reset_list, *n;
int rc;
if (reset_phase != MPT_IOC_POST_RESET)
goto out;
- if (!hd || !hd->ioc)
+ if (!ioc->sh || !ioc->sh->hostdata)
+ goto out;
+ hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+ if (!hd->ioc)
goto out;
if (list_empty(&hd->target_reset_list))
return BLKPREP_KILL;
}
- /* request is already processed by us, so return */
- if (blk_special_request(req)) {
- osm_debug("REQ_SPECIAL already set!\n");
- req->cmd_flags |= REQ_DONTPREP;
- return BLKPREP_OK;
- }
-
/* connect the i2o_block_request to the request */
if (!req->special) {
ireq = i2o_block_request_alloc();
ireq->i2o_blk_dev = i2o_blk_dev;
req->special = ireq;
ireq->req = req;
- } else
- ireq = req->special;
-
+ }
/* do not come back here */
- req->cmd_type = REQ_TYPE_SPECIAL;
req->cmd_flags |= REQ_DONTPREP;
return BLKPREP_OK;
mode &= 3; /* get current power mode */
- if (unit > ARRAY_SIZE(sm->unit_power)) {
+ if (unit >= ARRAY_SIZE(sm->unit_power)) {
dev_err(dev, "%s: bad unit %d\n", __FUNCTION__, unit);
goto already;
}
depends on X86 && ACPI
select BACKLIGHT_CLASS_DEVICE
---help---
- This mini-driver drives the SNC device present in the ACPI BIOS of
- the Sony Vaio laptops.
+ This mini-driver drives the SNC and SPIC devices present in the ACPI
+ BIOS of the Sony Vaio laptops.
- It gives access to some extra laptop functionalities. In its current
- form, this driver let the user set or query the screen brightness
- through the backlight subsystem and remove/apply power to some
+ It gives access to some extra laptop functionalities like Bluetooth,
+ screen brightness control, Fn keys and allows powering on/off some
devices.
Read <file:Documentation/sony-laptop.txt> for more information.
+config SONY_LAPTOP_OLD
+ bool "Sonypi compatibility"
+ depends on SONY_LAPTOP
+ ---help---
+ Build the sonypi driver compatibility code into the sony-laptop driver.
+
+config THINKPAD_ACPI
+ tristate "ThinkPad ACPI Laptop Extras"
+ depends on X86 && ACPI
+ select BACKLIGHT_CLASS_DEVICE
+ select HWMON
+ ---help---
+ This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
+ support for Fn-Fx key combinations, Bluetooth control, video
+ output switching, ThinkLight control, UltraBay eject and more.
+ For more information about this driver see
+ <file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
+
+ This driver was formely known as ibm-acpi.
+
+ If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+
+config THINKPAD_ACPI_DEBUG
+ bool "Verbose debug mode"
+ depends on THINKPAD_ACPI
+ default n
+ ---help---
+ Enables extra debugging information, at the expense of a slightly
+ increase in driver size.
+
+ If you are not sure, say N here.
+
+config THINKPAD_ACPI_DOCK
+ bool "Legacy Docking Station Support"
+ depends on THINKPAD_ACPI
+ depends on ACPI_DOCK=n
+ default n
+ ---help---
+ Allows the thinkpad_acpi driver to handle docking station events.
+ This support was made obsolete by the generic ACPI docking station
+ support (CONFIG_ACPI_DOCK). It will allow locking and removing the
+ laptop from the docking station, but will not properly connect PCI
+ devices.
+
+ If you are not sure, say N here.
+
+config THINKPAD_ACPI_BAY
+ bool "Legacy Removable Bay Support"
+ depends on THINKPAD_ACPI
+ default y
+ ---help---
+ Allows the thinkpad_acpi driver to handle removable bays. It will
+ eletrically disable the device in the bay, and also generate
+ notifications when the bay lever is ejected or inserted.
+
+ If you are not sure, say Y here.
+
endmenu
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
+obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
*
*
* Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
- * Copyright (C) 2006 Corentin Chary
+ * Copyright (C) 2006-2007 Corentin Chary
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
-#define ASUS_LAPTOP_VERSION "0.40"
+#define ASUS_LAPTOP_VERSION "0.41"
#define ASUS_HOTK_NAME "Asus Laptop Support"
#define ASUS_HOTK_CLASS "hotkey"
#define TLED_ON 0x08 //touchpad LED
#define RLED_ON 0x10 //Record LED
#define PLED_ON 0x20 //Phone LED
-#define LCD_ON 0x40 //LCD backlight
+#define GLED_ON 0x40 //Gaming LED
+#define LCD_ON 0x80 //LCD backlight
#define ASUS_LOG ASUS_HOTK_FILE ": "
#define ASUS_ERR KERN_ERR ASUS_LOG
MODULE_DESCRIPTION(ASUS_HOTK_NAME);
MODULE_LICENSE("GPL");
+/* WAPF defines the behavior of the Fn+Fx wlan key
+ * The significance of values is yet to be found, but
+ * most of the time:
+ * 0x0 will do nothing
+ * 0x1 will allow to control the device with Fn+Fx key.
+ * 0x4 will send an ACPI event (0x88) while pressing the Fn+Fx key
+ * 0x5 like 0x1 or 0x4
+ * So, if something doesn't work as you want, just try other values =)
+ */
+static uint wapf = 1;
+module_param(wapf, uint, 0644);
+MODULE_PARM_DESC(wapf, "WAPF value");
+
#define ASUS_HANDLE(object, paths...) \
static acpi_handle object##_handle = NULL; \
static char *object##_paths[] = { paths }
ASUS_HANDLE(tled_set, ASUS_HOTK_PREFIX "TLED");
ASUS_HANDLE(rled_set, ASUS_HOTK_PREFIX "RLED"); /* W1JC */
ASUS_HANDLE(pled_set, ASUS_HOTK_PREFIX "PLED"); /* A7J */
+ASUS_HANDLE(gled_set, ASUS_HOTK_PREFIX "GLED"); /* G1, G2 (probably) */
/* LEDD */
ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM");
ASUS_LED(tled, "touchpad");
ASUS_LED(rled, "record");
ASUS_LED(pled, "phone");
+ASUS_LED(gled, "gaming");
/*
* This function evaluates an ACPI method, given an int as parameter, the
return (status == AE_OK);
}
-static int read_acpi_int(acpi_handle handle, const char *method, int *val,
- struct acpi_object_list *params)
-{
- struct acpi_buffer output;
- union acpi_object out_obj;
- acpi_status status;
-
- output.length = sizeof(out_obj);
- output.pointer = &out_obj;
-
- status = acpi_evaluate_object(handle, (char *)method, params, &output);
- *val = out_obj.integer.value;
- return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER);
-}
-
static int read_wireless_status(int mask)
{
- int status;
+ ulong status;
+ acpi_status rv = AE_OK;
if (!wireless_status_handle)
return (hotk->status & mask) ? 1 : 0;
- if (read_acpi_int(wireless_status_handle, NULL, &status, NULL)) {
- return (status & mask) ? 1 : 0;
- } else
+ rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status);
+ if (ACPI_FAILURE(rv))
printk(ASUS_WARNING "Error reading Wireless status\n");
+ else
+ return (status & mask) ? 1 : 0;
return (hotk->status & mask) ? 1 : 0;
}
return (hotk->status & mask) ? 1 : 0;
}
-static void write_status(acpi_handle handle, int out, int mask, int invert)
+static void write_status(acpi_handle handle, int out, int mask)
{
hotk->status = (out) ? (hotk->status | mask) : (hotk->status & ~mask);
- if (invert) /* invert target value */
+ switch (mask) {
+ case MLED_ON:
out = !out & 0x1;
+ break;
+ case GLED_ON:
+ out = (out & 0x1) + 1;
+ break;
+ default:
+ out &= 0x1;
+ break;
+ }
if (handle && !write_acpi_int(handle, NULL, out, NULL))
- printk(ASUS_WARNING " write failed\n");
+ printk(ASUS_WARNING " write failed %x\n", mask);
}
/* /sys/class/led handlers */
-#define ASUS_LED_HANDLER(object, mask, invert) \
+#define ASUS_LED_HANDLER(object, mask) \
static void object##_led_set(struct led_classdev *led_cdev, \
enum led_brightness value) \
{ \
static void object##_led_update(struct work_struct *ignored) \
{ \
int value = object##_led_wk; \
- write_status(object##_set_handle, value, (mask), (invert)); \
+ write_status(object##_set_handle, value, (mask)); \
}
-ASUS_LED_HANDLER(mled, MLED_ON, 1);
-ASUS_LED_HANDLER(pled, PLED_ON, 0);
-ASUS_LED_HANDLER(rled, RLED_ON, 0);
-ASUS_LED_HANDLER(tled, TLED_ON, 0);
+ASUS_LED_HANDLER(mled, MLED_ON);
+ASUS_LED_HANDLER(pled, PLED_ON);
+ASUS_LED_HANDLER(rled, RLED_ON);
+ASUS_LED_HANDLER(tled, TLED_ON);
+ASUS_LED_HANDLER(gled, GLED_ON);
static int get_lcd_state(void)
{
printk(ASUS_WARNING "Error switching LCD\n");
}
- write_status(NULL, lcd, LCD_ON, 0);
+ write_status(NULL, lcd, LCD_ON);
return 0;
}
static int read_brightness(struct backlight_device *bd)
{
- int value;
+ ulong value;
+ acpi_status rv = AE_OK;
- if (!read_acpi_int(brightness_get_handle, NULL, &value, NULL))
+ rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
+ if (ACPI_FAILURE(rv))
printk(ASUS_WARNING "Error reading brightness\n");
return value;
struct device_attribute *attr, char *page)
{
int len = 0;
- int temp;
+ ulong temp;
char buf[16]; //enough for all info
+ acpi_status rv = AE_OK;
+
/*
* We use the easy way, we don't care of off and count, so we don't set eof
* to 1
* bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
* The significance of others is yet to be found.
*/
- if (read_acpi_int(hotk->handle, "SFUN", &temp, NULL))
- len +=
- sprintf(page + len, "SFUN value : 0x%04x\n", temp);
+ rv = acpi_evaluate_integer(hotk->handle, "SFUN", NULL, &temp);
+ if (!ACPI_FAILURE(rv))
+ len += sprintf(page + len, "SFUN value : 0x%04x\n",
+ (uint) temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
* battery low and 0x04 for battery critical, its readings tend to be
* Note: since not all the laptops provide this method, errors are
* silently ignored.
*/
- if (read_acpi_int(hotk->handle, "ASYM", &temp, NULL))
- len +=
- sprintf(page + len, "ASYM value : 0x%04x\n", temp);
+ rv = acpi_evaluate_integer(hotk->handle, "ASYM", NULL, &temp);
+ if (!ACPI_FAILURE(rv))
+ len += sprintf(page + len, "ASYM value : 0x%04x\n",
+ (uint) temp);
if (asus_info) {
snprintf(buf, 16, "%d", asus_info->length);
len += sprintf(page + len, "DSDT length : %s\n", buf);
}
static ssize_t store_status(const char *buf, size_t count,
- acpi_handle handle, int mask, int invert)
+ acpi_handle handle, int mask)
{
int rv, value;
int out = 0;
if (rv > 0)
out = value ? 1 : 0;
- write_status(handle, out, mask, invert);
+ write_status(handle, out, mask);
return rv;
}
static ssize_t store_wlan(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- return store_status(buf, count, wl_switch_handle, WL_ON, 0);
+ return store_status(buf, count, wl_switch_handle, WL_ON);
}
/*
struct device_attribute *attr, const char *buf,
size_t count)
{
- return store_status(buf, count, bt_switch_handle, BT_ON, 0);
+ return store_status(buf, count, bt_switch_handle, BT_ON);
}
/*
static int read_display(void)
{
- int value = 0;
+ ulong value = 0;
+ acpi_status rv = AE_OK;
/* In most of the case, we know how to set the display, but sometime
we can't read it */
if (display_get_handle) {
- if (!read_acpi_int(display_get_handle, NULL, &value, NULL))
+ rv = acpi_evaluate_integer(display_get_handle, NULL,
+ NULL, &value);
+ if (ACPI_FAILURE(rv))
printk(ASUS_WARNING "Error reading display status\n");
}
* switched
*/
if (event == ATKD_LCD_ON) {
- write_status(NULL, 1, LCD_ON, 0);
+ write_status(NULL, 1, LCD_ON);
lcd_blank(FB_BLANK_UNBLANK);
} else if (event == ATKD_LCD_OFF) {
- write_status(NULL, 0, LCD_ON, 0);
+ write_status(NULL, 0, LCD_ON);
lcd_blank(FB_BLANK_POWERDOWN);
}
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *model = NULL;
- int bsts_result, hwrs_result;
+ ulong bsts_result, hwrs_result;
char *string = NULL;
acpi_status status;
}
/* This needs to be called for some laptops to init properly */
- if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result, NULL))
+ status =
+ acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result);
+ if (ACPI_FAILURE(status))
printk(ASUS_WARNING "Error calling BSTS\n");
else if (bsts_result)
printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
- bsts_result);
+ (uint) bsts_result);
+
+ /* This too ... */
+ write_acpi_int(hotk->handle, "CWAP", wapf, NULL);
/*
* Try to match the object returned by INIT to the specific model.
ASUS_HANDLE_INIT(tled_set);
ASUS_HANDLE_INIT(rled_set);
ASUS_HANDLE_INIT(pled_set);
+ ASUS_HANDLE_INIT(gled_set);
ASUS_HANDLE_INIT(ledd_set);
* The significance of others is yet to be found.
* If we don't find the method, we assume the device are present.
*/
- if (!read_acpi_int(hotk->handle, "HRWS", &hwrs_result, NULL))
+ status =
+ acpi_evaluate_integer(hotk->handle, "HRWS", NULL, &hwrs_result);
+ if (ACPI_FAILURE(status))
hwrs_result = WL_HWRS | BT_HWRS;
if (hwrs_result & WL_HWRS)
asus_hotk_found = 1;
/* WLED and BLED are on by default */
- write_status(bt_switch_handle, 1, BT_ON, 0);
- write_status(wl_switch_handle, 1, WL_ON, 0);
+ write_status(bt_switch_handle, 1, BT_ON);
+ write_status(wl_switch_handle, 1, WL_ON);
+
+ /* If the h/w switch is off, we need to check the real status */
+ write_status(NULL, read_status(BT_ON), BT_ON);
+ write_status(NULL, read_status(WL_ON), WL_ON);
/* LCD Backlight is on by default */
- write_status(NULL, 1, LCD_ON, 0);
+ write_status(NULL, 1, LCD_ON);
/* LED display is off by default */
hotk->ledd_status = 0xFFF;
ASUS_LED_UNREGISTER(tled);
ASUS_LED_UNREGISTER(pled);
ASUS_LED_UNREGISTER(rled);
+ ASUS_LED_UNREGISTER(gled);
destroy_workqueue(led_workqueue);
}
if (rv)
return rv;
+ rv = ASUS_LED_REGISTER(gled, dev);
+ if (rv)
+ return rv;
+
led_workqueue = create_singlethread_workqueue("led_workqueue");
if (!led_workqueue)
return -ENOMEM;
/*
- * ACPI Sony Notebook Control Driver (SNC)
+ * ACPI Sony Notebook Control Driver (SNC and SPIC)
*
* Copyright (C) 2004-2005 Stelian Pop <stelian@popies.net>
* Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
* Parts of this driver inspired from asus_acpi.c and ibm_acpi.c
* which are copyrighted by their respective authors.
*
+ * The SNY6001 driver part is based on the sonypi driver which includes
+ * material from:
+ *
+ * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
+ *
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+ *
+ * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+ *
+ * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#include <linux/backlight.h>
#include <linux/platform_device.h>
#include <linux/err.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/kfifo.h>
+#include <linux/workqueue.h>
+#include <linux/acpi.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
+#include <linux/sonypi.h>
+#include <linux/sony-laptop.h>
+#ifdef CONFIG_SONY_LAPTOP_OLD
+#include <linux/poll.h>
+#include <linux/miscdevice.h>
+#endif
-#define ACPI_SNC_CLASS "sony"
-#define ACPI_SNC_HID "SNY5001"
-#define ACPI_SNC_DRIVER_NAME "ACPI Sony Notebook Control Driver v0.4"
+#define DRV_PFX "sony-laptop: "
+#define dprintk(msg...) do { \
+ if (debug) printk(KERN_WARNING DRV_PFX msg); \
+} while (0)
-/* the device uses 1-based values, while the backlight subsystem uses
- 0-based values */
-#define SONY_MAX_BRIGHTNESS 8
+#define SONY_LAPTOP_DRIVER_VERSION "0.5"
-#define LOG_PFX KERN_WARNING "sony-laptop: "
+#define SONY_NC_CLASS "sony-nc"
+#define SONY_NC_HID "SNY5001"
+#define SONY_NC_DRIVER_NAME "Sony Notebook Control Driver"
+
+#define SONY_PIC_CLASS "sony-pic"
+#define SONY_PIC_HID "SNY6001"
+#define SONY_PIC_DRIVER_NAME "Sony Programmable IO Control Driver"
MODULE_AUTHOR("Stelian Pop, Mattia Dongili");
-MODULE_DESCRIPTION(ACPI_SNC_DRIVER_NAME);
+MODULE_DESCRIPTION("Sony laptop extras driver (SPIC and SNC ACPI device)");
MODULE_LICENSE("GPL");
+MODULE_VERSION(SONY_LAPTOP_DRIVER_VERSION);
static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "set this to 1 (and RTFM) if you want to help "
"the development of this driver");
-static ssize_t sony_acpi_show(struct device *, struct device_attribute *,
+static int no_spic; /* = 0 */
+module_param(no_spic, int, 0444);
+MODULE_PARM_DESC(no_spic,
+ "set this if you don't want to enable the SPIC device");
+
+static int compat; /* = 0 */
+module_param(compat, int, 0444);
+MODULE_PARM_DESC(compat,
+ "set this if you want to enable backward compatibility mode");
+
+static unsigned long mask = 0xffffffff;
+module_param(mask, ulong, 0644);
+MODULE_PARM_DESC(mask,
+ "set this to the mask of event you want to enable (see doc)");
+
+static int camera; /* = 0 */
+module_param(camera, int, 0444);
+MODULE_PARM_DESC(camera,
+ "set this to 1 to enable Motion Eye camera controls "
+ "(only use it if you have a C1VE or C1VN model)");
+
+#ifdef CONFIG_SONY_LAPTOP_OLD
+static int minor = -1;
+module_param(minor, int, 0);
+MODULE_PARM_DESC(minor,
+ "minor number of the misc device for the SPIC compatibility code, "
+ "default is -1 (automatic)");
+#endif
+
+/*********** Input Devices ***********/
+
+#define SONY_LAPTOP_BUF_SIZE 128
+struct sony_laptop_input_s {
+ atomic_t users;
+ struct input_dev *jog_dev;
+ struct input_dev *key_dev;
+ struct kfifo *fifo;
+ spinlock_t fifo_lock;
+ struct workqueue_struct *wq;
+};
+static struct sony_laptop_input_s sony_laptop_input = {
+ .users = ATOMIC_INIT(0),
+};
+
+struct sony_laptop_keypress {
+ struct input_dev *dev;
+ int key;
+};
+
+/* Correspondance table between sonypi events and input layer events */
+static struct {
+ int sonypiev;
+ int inputev;
+} sony_laptop_inputkeys[] = {
+ { SONYPI_EVENT_CAPTURE_PRESSED, KEY_CAMERA },
+ { SONYPI_EVENT_FNKEY_ONLY, KEY_FN },
+ { SONYPI_EVENT_FNKEY_ESC, KEY_FN_ESC },
+ { SONYPI_EVENT_FNKEY_F1, KEY_FN_F1 },
+ { SONYPI_EVENT_FNKEY_F2, KEY_FN_F2 },
+ { SONYPI_EVENT_FNKEY_F3, KEY_FN_F3 },
+ { SONYPI_EVENT_FNKEY_F4, KEY_FN_F4 },
+ { SONYPI_EVENT_FNKEY_F5, KEY_FN_F5 },
+ { SONYPI_EVENT_FNKEY_F6, KEY_FN_F6 },
+ { SONYPI_EVENT_FNKEY_F7, KEY_FN_F7 },
+ { SONYPI_EVENT_FNKEY_F8, KEY_FN_F8 },
+ { SONYPI_EVENT_FNKEY_F9, KEY_FN_F9 },
+ { SONYPI_EVENT_FNKEY_F10, KEY_FN_F10 },
+ { SONYPI_EVENT_FNKEY_F11, KEY_FN_F11 },
+ { SONYPI_EVENT_FNKEY_F12, KEY_FN_F12 },
+ { SONYPI_EVENT_FNKEY_1, KEY_FN_1 },
+ { SONYPI_EVENT_FNKEY_2, KEY_FN_2 },
+ { SONYPI_EVENT_FNKEY_D, KEY_FN_D },
+ { SONYPI_EVENT_FNKEY_E, KEY_FN_E },
+ { SONYPI_EVENT_FNKEY_F, KEY_FN_F },
+ { SONYPI_EVENT_FNKEY_S, KEY_FN_S },
+ { SONYPI_EVENT_FNKEY_B, KEY_FN_B },
+ { SONYPI_EVENT_BLUETOOTH_PRESSED, KEY_BLUE },
+ { SONYPI_EVENT_BLUETOOTH_ON, KEY_BLUE },
+ { SONYPI_EVENT_PKEY_P1, KEY_PROG1 },
+ { SONYPI_EVENT_PKEY_P2, KEY_PROG2 },
+ { SONYPI_EVENT_PKEY_P3, KEY_PROG3 },
+ { SONYPI_EVENT_BACK_PRESSED, KEY_BACK },
+ { SONYPI_EVENT_HELP_PRESSED, KEY_HELP },
+ { SONYPI_EVENT_ZOOM_PRESSED, KEY_ZOOM },
+ { SONYPI_EVENT_THUMBPHRASE_PRESSED, BTN_THUMB },
+ { 0, 0 },
+};
+
+/* release buttons after a short delay if pressed */
+static void do_sony_laptop_release_key(struct work_struct *work)
+{
+ struct sony_laptop_keypress kp;
+
+ while (kfifo_get(sony_laptop_input.fifo, (unsigned char *)&kp,
+ sizeof(kp)) == sizeof(kp)) {
+ msleep(10);
+ input_report_key(kp.dev, kp.key, 0);
+ input_sync(kp.dev);
+ }
+}
+static DECLARE_WORK(sony_laptop_release_key_work,
+ do_sony_laptop_release_key);
+
+/* forward event to the input subsytem */
+static void sony_laptop_report_input_event(u8 event)
+{
+ struct input_dev *jog_dev = sony_laptop_input.jog_dev;
+ struct input_dev *key_dev = sony_laptop_input.key_dev;
+ struct sony_laptop_keypress kp = { NULL };
+ int i;
+
+ if (event == SONYPI_EVENT_FNKEY_RELEASED) {
+ /* Nothing, not all VAIOs generate this event */
+ return;
+ }
+
+ /* report events */
+ switch (event) {
+ /* jog_dev events */
+ case SONYPI_EVENT_JOGDIAL_UP:
+ case SONYPI_EVENT_JOGDIAL_UP_PRESSED:
+ input_report_rel(jog_dev, REL_WHEEL, 1);
+ input_sync(jog_dev);
+ return;
+
+ case SONYPI_EVENT_JOGDIAL_DOWN:
+ case SONYPI_EVENT_JOGDIAL_DOWN_PRESSED:
+ input_report_rel(jog_dev, REL_WHEEL, -1);
+ input_sync(jog_dev);
+ return;
+
+ /* key_dev events */
+ case SONYPI_EVENT_JOGDIAL_PRESSED:
+ kp.key = BTN_MIDDLE;
+ kp.dev = jog_dev;
+ break;
+
+ default:
+ for (i = 0; sony_laptop_inputkeys[i].sonypiev; i++)
+ if (event == sony_laptop_inputkeys[i].sonypiev) {
+ kp.dev = key_dev;
+ kp.key = sony_laptop_inputkeys[i].inputev;
+ break;
+ }
+ break;
+ }
+
+ if (kp.dev) {
+ input_report_key(kp.dev, kp.key, 1);
+ input_sync(kp.dev);
+ kfifo_put(sony_laptop_input.fifo,
+ (unsigned char *)&kp, sizeof(kp));
+
+ if (!work_pending(&sony_laptop_release_key_work))
+ queue_work(sony_laptop_input.wq,
+ &sony_laptop_release_key_work);
+ } else
+ dprintk("unknown input event %.2x\n", event);
+}
+
+static int sony_laptop_setup_input(void)
+{
+ struct input_dev *jog_dev;
+ struct input_dev *key_dev;
+ int i;
+ int error;
+
+ /* don't run again if already initialized */
+ if (atomic_add_return(1, &sony_laptop_input.users) > 1)
+ return 0;
+
+ /* kfifo */
+ spin_lock_init(&sony_laptop_input.fifo_lock);
+ sony_laptop_input.fifo =
+ kfifo_alloc(SONY_LAPTOP_BUF_SIZE, GFP_KERNEL,
+ &sony_laptop_input.fifo_lock);
+ if (IS_ERR(sony_laptop_input.fifo)) {
+ printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n");
+ error = PTR_ERR(sony_laptop_input.fifo);
+ goto err_dec_users;
+ }
+
+ /* init workqueue */
+ sony_laptop_input.wq = create_singlethread_workqueue("sony-laptop");
+ if (!sony_laptop_input.wq) {
+ printk(KERN_ERR DRV_PFX
+ "Unabe to create workqueue.\n");
+ error = -ENXIO;
+ goto err_free_kfifo;
+ }
+
+ /* input keys */
+ key_dev = input_allocate_device();
+ if (!key_dev) {
+ error = -ENOMEM;
+ goto err_destroy_wq;
+ }
+
+ key_dev->name = "Sony Vaio Keys";
+ key_dev->id.bustype = BUS_ISA;
+ key_dev->id.vendor = PCI_VENDOR_ID_SONY;
+
+ /* Initialize the Input Drivers: special keys */
+ key_dev->evbit[0] = BIT(EV_KEY);
+ for (i = 0; sony_laptop_inputkeys[i].sonypiev; i++)
+ if (sony_laptop_inputkeys[i].inputev)
+ set_bit(sony_laptop_inputkeys[i].inputev,
+ key_dev->keybit);
+
+ error = input_register_device(key_dev);
+ if (error)
+ goto err_free_keydev;
+
+ sony_laptop_input.key_dev = key_dev;
+
+ /* jogdial */
+ jog_dev = input_allocate_device();
+ if (!jog_dev) {
+ error = -ENOMEM;
+ goto err_unregister_keydev;
+ }
+
+ jog_dev->name = "Sony Vaio Jogdial";
+ jog_dev->id.bustype = BUS_ISA;
+ jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
+
+ jog_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ jog_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_MIDDLE);
+ jog_dev->relbit[0] = BIT(REL_WHEEL);
+
+ error = input_register_device(jog_dev);
+ if (error)
+ goto err_free_jogdev;
+
+ sony_laptop_input.jog_dev = jog_dev;
+
+ return 0;
+
+err_free_jogdev:
+ input_free_device(jog_dev);
+
+err_unregister_keydev:
+ input_unregister_device(key_dev);
+ /* to avoid kref underflow below at input_free_device */
+ key_dev = NULL;
+
+err_free_keydev:
+ input_free_device(key_dev);
+
+err_destroy_wq:
+ destroy_workqueue(sony_laptop_input.wq);
+
+err_free_kfifo:
+ kfifo_free(sony_laptop_input.fifo);
+
+err_dec_users:
+ atomic_dec(&sony_laptop_input.users);
+ return error;
+}
+
+static void sony_laptop_remove_input(void)
+{
+ /* cleanup only after the last user has gone */
+ if (!atomic_dec_and_test(&sony_laptop_input.users))
+ return;
+
+ /* flush workqueue first */
+ flush_workqueue(sony_laptop_input.wq);
+
+ /* destroy input devs */
+ input_unregister_device(sony_laptop_input.key_dev);
+ sony_laptop_input.key_dev = NULL;
+
+ if (sony_laptop_input.jog_dev) {
+ input_unregister_device(sony_laptop_input.jog_dev);
+ sony_laptop_input.jog_dev = NULL;
+ }
+
+ destroy_workqueue(sony_laptop_input.wq);
+ kfifo_free(sony_laptop_input.fifo);
+}
+
+/*********** Platform Device ***********/
+
+static atomic_t sony_pf_users = ATOMIC_INIT(0);
+static struct platform_driver sony_pf_driver = {
+ .driver = {
+ .name = "sony-laptop",
+ .owner = THIS_MODULE,
+ }
+};
+static struct platform_device *sony_pf_device;
+
+static int sony_pf_add(void)
+{
+ int ret = 0;
+
+ /* don't run again if already initialized */
+ if (atomic_add_return(1, &sony_pf_users) > 1)
+ return 0;
+
+ ret = platform_driver_register(&sony_pf_driver);
+ if (ret)
+ goto out;
+
+ sony_pf_device = platform_device_alloc("sony-laptop", -1);
+ if (!sony_pf_device) {
+ ret = -ENOMEM;
+ goto out_platform_registered;
+ }
+
+ ret = platform_device_add(sony_pf_device);
+ if (ret)
+ goto out_platform_alloced;
+
+ return 0;
+
+ out_platform_alloced:
+ platform_device_put(sony_pf_device);
+ sony_pf_device = NULL;
+ out_platform_registered:
+ platform_driver_unregister(&sony_pf_driver);
+ out:
+ atomic_dec(&sony_pf_users);
+ return ret;
+}
+
+static void sony_pf_remove(void)
+{
+ /* deregister only after the last user has gone */
+ if (!atomic_dec_and_test(&sony_pf_users))
+ return;
+
+ platform_device_del(sony_pf_device);
+ platform_device_put(sony_pf_device);
+ platform_driver_unregister(&sony_pf_driver);
+}
+
+/*********** SNC (SNY5001) Device ***********/
+
+/* the device uses 1-based values, while the backlight subsystem uses
+ 0-based values */
+#define SONY_MAX_BRIGHTNESS 8
+
+#define SNC_VALIDATE_IN 0
+#define SNC_VALIDATE_OUT 1
+
+static ssize_t sony_nc_sysfs_show(struct device *, struct device_attribute *,
char *);
-static ssize_t sony_acpi_store(struct device *, struct device_attribute *,
+static ssize_t sony_nc_sysfs_store(struct device *, struct device_attribute *,
const char *, size_t);
static int boolean_validate(const int, const int);
static int brightness_default_validate(const int, const int);
-#define SNC_VALIDATE_IN 0
-#define SNC_VALIDATE_OUT 1
-
-struct sony_acpi_value {
+struct sony_nc_value {
char *name; /* name of the entry */
char **acpiget; /* names of the ACPI get function */
char **acpiset; /* names of the ACPI set function */
struct device_attribute devattr; /* sysfs atribute */
};
-#define HANDLE_NAMES(_name, _values...) \
+#define SNC_HANDLE_NAMES(_name, _values...) \
static char *snc_##_name[] = { _values, NULL }
-#define SONY_ACPI_VALUE(_name, _getters, _setters, _validate, _debug) \
+#define SNC_HANDLE(_name, _getters, _setters, _validate, _debug) \
{ \
.name = __stringify(_name), \
.acpiget = _getters, \
.acpiset = _setters, \
.validate = _validate, \
.debug = _debug, \
- .devattr = __ATTR(_name, 0, sony_acpi_show, sony_acpi_store), \
+ .devattr = __ATTR(_name, 0, sony_nc_sysfs_show, sony_nc_sysfs_store), \
}
-#define SONY_ACPI_VALUE_NULL { .name = NULL }
+#define SNC_HANDLE_NULL { .name = NULL }
-HANDLE_NAMES(fnkey_get, "GHKE");
+SNC_HANDLE_NAMES(fnkey_get, "GHKE");
-HANDLE_NAMES(brightness_def_get, "GPBR");
-HANDLE_NAMES(brightness_def_set, "SPBR");
+SNC_HANDLE_NAMES(brightness_def_get, "GPBR");
+SNC_HANDLE_NAMES(brightness_def_set, "SPBR");
-HANDLE_NAMES(cdpower_get, "GCDP");
-HANDLE_NAMES(cdpower_set, "SCDP", "CDPW");
+SNC_HANDLE_NAMES(cdpower_get, "GCDP");
+SNC_HANDLE_NAMES(cdpower_set, "SCDP", "CDPW");
-HANDLE_NAMES(audiopower_get, "GAZP");
-HANDLE_NAMES(audiopower_set, "AZPW");
+SNC_HANDLE_NAMES(audiopower_get, "GAZP");
+SNC_HANDLE_NAMES(audiopower_set, "AZPW");
-HANDLE_NAMES(lanpower_get, "GLNP");
-HANDLE_NAMES(lanpower_set, "LNPW");
+SNC_HANDLE_NAMES(lanpower_get, "GLNP");
+SNC_HANDLE_NAMES(lanpower_set, "LNPW");
-HANDLE_NAMES(PID_get, "GPID");
+SNC_HANDLE_NAMES(PID_get, "GPID");
-HANDLE_NAMES(CTR_get, "GCTR");
-HANDLE_NAMES(CTR_set, "SCTR");
+SNC_HANDLE_NAMES(CTR_get, "GCTR");
+SNC_HANDLE_NAMES(CTR_set, "SCTR");
-HANDLE_NAMES(PCR_get, "GPCR");
-HANDLE_NAMES(PCR_set, "SPCR");
+SNC_HANDLE_NAMES(PCR_get, "GPCR");
+SNC_HANDLE_NAMES(PCR_set, "SPCR");
-HANDLE_NAMES(CMI_get, "GCMI");
-HANDLE_NAMES(CMI_set, "SCMI");
+SNC_HANDLE_NAMES(CMI_get, "GCMI");
+SNC_HANDLE_NAMES(CMI_set, "SCMI");
-static struct sony_acpi_value sony_acpi_values[] = {
- SONY_ACPI_VALUE(brightness_default, snc_brightness_def_get,
+static struct sony_nc_value sony_nc_values[] = {
+ SNC_HANDLE(brightness_default, snc_brightness_def_get,
snc_brightness_def_set, brightness_default_validate, 0),
- SONY_ACPI_VALUE(fnkey, snc_fnkey_get, NULL, NULL, 0),
- SONY_ACPI_VALUE(cdpower, snc_cdpower_get, snc_cdpower_set, boolean_validate, 0),
- SONY_ACPI_VALUE(audiopower, snc_audiopower_get, snc_audiopower_set,
+ SNC_HANDLE(fnkey, snc_fnkey_get, NULL, NULL, 0),
+ SNC_HANDLE(cdpower, snc_cdpower_get, snc_cdpower_set, boolean_validate, 0),
+ SNC_HANDLE(audiopower, snc_audiopower_get, snc_audiopower_set,
boolean_validate, 0),
- SONY_ACPI_VALUE(lanpower, snc_lanpower_get, snc_lanpower_set,
+ SNC_HANDLE(lanpower, snc_lanpower_get, snc_lanpower_set,
boolean_validate, 1),
/* unknown methods */
- SONY_ACPI_VALUE(PID, snc_PID_get, NULL, NULL, 1),
- SONY_ACPI_VALUE(CTR, snc_CTR_get, snc_CTR_set, NULL, 1),
- SONY_ACPI_VALUE(PCR, snc_PCR_get, snc_PCR_set, NULL, 1),
- SONY_ACPI_VALUE(CMI, snc_CMI_get, snc_CMI_set, NULL, 1),
- SONY_ACPI_VALUE_NULL
+ SNC_HANDLE(PID, snc_PID_get, NULL, NULL, 1),
+ SNC_HANDLE(CTR, snc_CTR_get, snc_CTR_set, NULL, 1),
+ SNC_HANDLE(PCR, snc_PCR_get, snc_PCR_set, NULL, 1),
+ SNC_HANDLE(CMI, snc_CMI_get, snc_CMI_set, NULL, 1),
+ SNC_HANDLE_NULL
};
-static acpi_handle sony_acpi_handle;
-static struct acpi_device *sony_acpi_acpi_device = NULL;
+static acpi_handle sony_nc_acpi_handle;
+static struct acpi_device *sony_nc_acpi_device = NULL;
/*
* acpi_evaluate_object wrappers
return 0;
}
- printk(LOG_PFX "acpi_callreadfunc failed\n");
+ printk(KERN_WARNING DRV_PFX "acpi_callreadfunc failed\n");
return -1;
}
if (status == AE_OK) {
if (result != NULL) {
if (out_obj.type != ACPI_TYPE_INTEGER) {
- printk(LOG_PFX "acpi_evaluate_object bad "
+ printk(KERN_WARNING DRV_PFX "acpi_evaluate_object bad "
"return type\n");
return -1;
}
return 0;
}
- printk(LOG_PFX "acpi_evaluate_object failed\n");
+ printk(KERN_WARNING DRV_PFX "acpi_evaluate_object failed\n");
return -1;
}
/*
- * sony_acpi_values input/output validate functions
+ * sony_nc_values input/output validate functions
*/
/* brightness_default_validate:
}
/*
- * Sysfs show/store common to all sony_acpi_values
+ * Sysfs show/store common to all sony_nc_values
*/
-static ssize_t sony_acpi_show(struct device *dev, struct device_attribute *attr,
+static ssize_t sony_nc_sysfs_show(struct device *dev, struct device_attribute *attr,
char *buffer)
{
int value;
- struct sony_acpi_value *item =
- container_of(attr, struct sony_acpi_value, devattr);
+ struct sony_nc_value *item =
+ container_of(attr, struct sony_nc_value, devattr);
if (!*item->acpiget)
return -EIO;
- if (acpi_callgetfunc(sony_acpi_handle, *item->acpiget, &value) < 0)
+ if (acpi_callgetfunc(sony_nc_acpi_handle, *item->acpiget, &value) < 0)
return -EIO;
if (item->validate)
return snprintf(buffer, PAGE_SIZE, "%d\n", value);
}
-static ssize_t sony_acpi_store(struct device *dev,
+static ssize_t sony_nc_sysfs_store(struct device *dev,
struct device_attribute *attr,
const char *buffer, size_t count)
{
int value;
- struct sony_acpi_value *item =
- container_of(attr, struct sony_acpi_value, devattr);
+ struct sony_nc_value *item =
+ container_of(attr, struct sony_nc_value, devattr);
if (!item->acpiset)
return -EIO;
if (value < 0)
return value;
- if (acpi_callsetfunc(sony_acpi_handle, *item->acpiset, value, NULL) < 0)
+ if (acpi_callsetfunc(sony_nc_acpi_handle, *item->acpiset, value, NULL) < 0)
return -EIO;
item->value = value;
item->valid = 1;
return count;
}
-/*
- * Platform device
- */
-static struct platform_driver sncpf_driver = {
- .driver = {
- .name = "sony-laptop",
- .owner = THIS_MODULE,
- }
-};
-static struct platform_device *sncpf_device;
-
-static int sony_snc_pf_add(void)
-{
- acpi_handle handle;
- struct sony_acpi_value *item;
- int ret = 0;
-
- ret = platform_driver_register(&sncpf_driver);
- if (ret)
- goto out;
-
- sncpf_device = platform_device_alloc("sony-laptop", -1);
- if (!sncpf_device) {
- ret = -ENOMEM;
- goto out_platform_registered;
- }
-
- ret = platform_device_add(sncpf_device);
- if (ret)
- goto out_platform_alloced;
-
- for (item = sony_acpi_values; item->name; ++item) {
-
- if (!debug && item->debug)
- continue;
-
- /* find the available acpiget as described in the DSDT */
- for (; item->acpiget && *item->acpiget; ++item->acpiget) {
- if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle,
- *item->acpiget,
- &handle))) {
- if (debug)
- printk(LOG_PFX "Found %s getter: %s\n",
- item->name, *item->acpiget);
- item->devattr.attr.mode |= S_IRUGO;
- break;
- }
- }
-
- /* find the available acpiset as described in the DSDT */
- for (; item->acpiset && *item->acpiset; ++item->acpiset) {
- if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle,
- *item->acpiset,
- &handle))) {
- if (debug)
- printk(LOG_PFX "Found %s setter: %s\n",
- item->name, *item->acpiset);
- item->devattr.attr.mode |= S_IWUSR;
- break;
- }
- }
-
- if (item->devattr.attr.mode != 0) {
- ret =
- device_create_file(&sncpf_device->dev,
- &item->devattr);
- if (ret)
- goto out_sysfs;
- }
- }
-
- return 0;
-
- out_sysfs:
- for (item = sony_acpi_values; item->name; ++item) {
- device_remove_file(&sncpf_device->dev, &item->devattr);
- }
- platform_device_del(sncpf_device);
- out_platform_alloced:
- platform_device_put(sncpf_device);
- out_platform_registered:
- platform_driver_unregister(&sncpf_driver);
- out:
- return ret;
-}
-
-static void sony_snc_pf_remove(void)
-{
- struct sony_acpi_value *item;
-
- for (item = sony_acpi_values; item->name; ++item) {
- device_remove_file(&sncpf_device->dev, &item->devattr);
- }
-
- platform_device_del(sncpf_device);
- platform_device_put(sncpf_device);
- platform_driver_unregister(&sncpf_driver);
-}
/*
* Backlight device
*/
static int sony_backlight_update_status(struct backlight_device *bd)
{
- return acpi_callsetfunc(sony_acpi_handle, "SBRT",
+ return acpi_callsetfunc(sony_nc_acpi_handle, "SBRT",
bd->props.brightness + 1, NULL);
}
{
int value;
- if (acpi_callgetfunc(sony_acpi_handle, "GBRT", &value))
+ if (acpi_callgetfunc(sony_nc_acpi_handle, "GBRT", &value))
return 0;
/* brightness levels are 1-based, while backlight ones are 0-based */
return value - 1;
*/
static void sony_acpi_notify(acpi_handle handle, u32 event, void *data)
{
- if (debug)
- printk(LOG_PFX "sony_acpi_notify, event: %d\n", event);
- acpi_bus_generate_event(sony_acpi_acpi_device, 1, event);
+ dprintk("sony_acpi_notify, event: %d\n", event);
+ sony_laptop_report_input_event(event);
+ acpi_bus_generate_event(sony_nc_acpi_device, 1, event);
}
static acpi_status sony_walk_callback(acpi_handle handle, u32 level,
node = (struct acpi_namespace_node *)handle;
operand = (union acpi_operand_object *)node->object;
- printk(LOG_PFX "method: name: %4.4s, args %X\n", node->name.ascii,
+ printk(KERN_WARNING DRV_PFX "method: name: %4.4s, args %X\n", node->name.ascii,
(u32) operand->method.param_count);
return AE_OK;
/*
* ACPI device
*/
-static int sony_acpi_resume(struct acpi_device *device)
+static int sony_nc_resume(struct acpi_device *device)
{
- struct sony_acpi_value *item;
+ struct sony_nc_value *item;
- for (item = sony_acpi_values; item->name; item++) {
+ for (item = sony_nc_values; item->name; item++) {
int ret;
if (!item->valid)
continue;
- ret = acpi_callsetfunc(sony_acpi_handle, *item->acpiset,
+ ret = acpi_callsetfunc(sony_nc_acpi_handle, *item->acpiset,
item->value, NULL);
if (ret < 0) {
printk("%s: %d\n", __FUNCTION__, ret);
return 0;
}
-static int sony_acpi_add(struct acpi_device *device)
+static int sony_nc_add(struct acpi_device *device)
{
acpi_status status;
int result = 0;
acpi_handle handle;
+ struct sony_nc_value *item;
+
+ printk(KERN_INFO DRV_PFX "%s v%s.\n",
+ SONY_NC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
- sony_acpi_acpi_device = device;
+ sony_nc_acpi_device = device;
+ strcpy(acpi_device_class(device), "sony/hotkey");
- sony_acpi_handle = device->handle;
+ sony_nc_acpi_handle = device->handle;
if (debug) {
- status = acpi_walk_namespace(ACPI_TYPE_METHOD, sony_acpi_handle,
+ status = acpi_walk_namespace(ACPI_TYPE_METHOD, sony_nc_acpi_handle,
1, sony_walk_callback, NULL, NULL);
if (ACPI_FAILURE(status)) {
- printk(LOG_PFX "unable to walk acpi resources\n");
+ printk(KERN_WARNING DRV_PFX "unable to walk acpi resources\n");
result = -ENODEV;
goto outwalk;
}
}
- status = acpi_install_notify_handler(sony_acpi_handle,
+ /* setup input devices and helper fifo */
+ result = sony_laptop_setup_input();
+ if (result) {
+ printk(KERN_ERR DRV_PFX
+ "Unabe to create input devices.\n");
+ goto outwalk;
+ }
+
+ status = acpi_install_notify_handler(sony_nc_acpi_handle,
ACPI_DEVICE_NOTIFY,
sony_acpi_notify, NULL);
if (ACPI_FAILURE(status)) {
- printk(LOG_PFX "unable to install notify handler\n");
+ printk(KERN_WARNING DRV_PFX "unable to install notify handler\n");
result = -ENODEV;
- goto outwalk;
+ goto outinput;
}
- if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle, "GBRT", &handle))) {
+ if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) {
sony_backlight_device = backlight_device_register("sony", NULL,
NULL,
&sony_backlight_ops);
if (IS_ERR(sony_backlight_device)) {
- printk(LOG_PFX "unable to register backlight device\n");
+ printk(KERN_WARNING DRV_PFX "unable to register backlight device\n");
sony_backlight_device = NULL;
} else {
sony_backlight_device->props.brightness =
}
- if (sony_snc_pf_add())
+ result = sony_pf_add();
+ if (result)
goto outbacklight;
- printk(KERN_INFO ACPI_SNC_DRIVER_NAME " successfully installed\n");
+ /* create sony_pf sysfs attributes related to the SNC device */
+ for (item = sony_nc_values; item->name; ++item) {
+
+ if (!debug && item->debug)
+ continue;
+
+ /* find the available acpiget as described in the DSDT */
+ for (; item->acpiget && *item->acpiget; ++item->acpiget) {
+ if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle,
+ *item->acpiget,
+ &handle))) {
+ dprintk("Found %s getter: %s\n",
+ item->name, *item->acpiget);
+ item->devattr.attr.mode |= S_IRUGO;
+ break;
+ }
+ }
+
+ /* find the available acpiset as described in the DSDT */
+ for (; item->acpiset && *item->acpiset; ++item->acpiset) {
+ if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle,
+ *item->acpiset,
+ &handle))) {
+ dprintk("Found %s setter: %s\n",
+ item->name, *item->acpiset);
+ item->devattr.attr.mode |= S_IWUSR;
+ break;
+ }
+ }
+
+ if (item->devattr.attr.mode != 0) {
+ result =
+ device_create_file(&sony_pf_device->dev,
+ &item->devattr);
+ if (result)
+ goto out_sysfs;
+ }
+ }
return 0;
+ out_sysfs:
+ for (item = sony_nc_values; item->name; ++item) {
+ device_remove_file(&sony_pf_device->dev, &item->devattr);
+ }
+ sony_pf_remove();
+
outbacklight:
if (sony_backlight_device)
backlight_device_unregister(sony_backlight_device);
- status = acpi_remove_notify_handler(sony_acpi_handle,
+ status = acpi_remove_notify_handler(sony_nc_acpi_handle,
ACPI_DEVICE_NOTIFY,
sony_acpi_notify);
if (ACPI_FAILURE(status))
- printk(LOG_PFX "unable to remove notify handler\n");
+ printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n");
+
+ outinput:
+ sony_laptop_remove_input();
+
outwalk:
return result;
}
-static int sony_acpi_remove(struct acpi_device *device, int type)
+static int sony_nc_remove(struct acpi_device *device, int type)
{
acpi_status status;
+ struct sony_nc_value *item;
if (sony_backlight_device)
backlight_device_unregister(sony_backlight_device);
- sony_acpi_acpi_device = NULL;
+ sony_nc_acpi_device = NULL;
- status = acpi_remove_notify_handler(sony_acpi_handle,
+ status = acpi_remove_notify_handler(sony_nc_acpi_handle,
ACPI_DEVICE_NOTIFY,
sony_acpi_notify);
if (ACPI_FAILURE(status))
- printk(LOG_PFX "unable to remove notify handler\n");
+ printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n");
- sony_snc_pf_remove();
+ for (item = sony_nc_values; item->name; ++item) {
+ device_remove_file(&sony_pf_device->dev, &item->devattr);
+ }
- printk(KERN_INFO ACPI_SNC_DRIVER_NAME " successfully removed\n");
+ sony_pf_remove();
+ sony_laptop_remove_input();
+ dprintk(SONY_NC_DRIVER_NAME " removed.\n");
return 0;
}
-static struct acpi_driver sony_acpi_driver = {
- .name = ACPI_SNC_DRIVER_NAME,
- .class = ACPI_SNC_CLASS,
- .ids = ACPI_SNC_HID,
+static struct acpi_driver sony_nc_driver = {
+ .name = SONY_NC_DRIVER_NAME,
+ .class = SONY_NC_CLASS,
+ .ids = SONY_NC_HID,
+ .owner = THIS_MODULE,
.ops = {
- .add = sony_acpi_add,
- .remove = sony_acpi_remove,
- .resume = sony_acpi_resume,
+ .add = sony_nc_add,
+ .remove = sony_nc_remove,
+ .resume = sony_nc_resume,
},
};
-static int __init sony_acpi_init(void)
-{
- return acpi_bus_register_driver(&sony_acpi_driver);
+/*********** SPIC (SNY6001) Device ***********/
+
+#define SONYPI_DEVICE_TYPE1 0x00000001
+#define SONYPI_DEVICE_TYPE2 0x00000002
+#define SONYPI_DEVICE_TYPE3 0x00000004
+
+#define SONY_PIC_EV_MASK 0xff
+
+struct sony_pic_ioport {
+ struct acpi_resource_io io;
+ struct list_head list;
+};
+
+struct sony_pic_irq {
+ struct acpi_resource_irq irq;
+ struct list_head list;
+};
+
+struct sony_pic_dev {
+ int model;
+ u8 camera_power;
+ u8 bluetooth_power;
+ u8 wwan_power;
+ struct acpi_device *acpi_dev;
+ struct sony_pic_irq *cur_irq;
+ struct sony_pic_ioport *cur_ioport;
+ struct list_head interrupts;
+ struct list_head ioports;
+ struct mutex lock;
+};
+
+static struct sony_pic_dev spic_dev = {
+ .interrupts = LIST_HEAD_INIT(spic_dev.interrupts),
+ .ioports = LIST_HEAD_INIT(spic_dev.ioports),
+};
+
+/* Event masks */
+#define SONYPI_JOGGER_MASK 0x00000001
+#define SONYPI_CAPTURE_MASK 0x00000002
+#define SONYPI_FNKEY_MASK 0x00000004
+#define SONYPI_BLUETOOTH_MASK 0x00000008
+#define SONYPI_PKEY_MASK 0x00000010
+#define SONYPI_BACK_MASK 0x00000020
+#define SONYPI_HELP_MASK 0x00000040
+#define SONYPI_LID_MASK 0x00000080
+#define SONYPI_ZOOM_MASK 0x00000100
+#define SONYPI_THUMBPHRASE_MASK 0x00000200
+#define SONYPI_MEYE_MASK 0x00000400
+#define SONYPI_MEMORYSTICK_MASK 0x00000800
+#define SONYPI_BATTERY_MASK 0x00001000
+#define SONYPI_WIRELESS_MASK 0x00002000
+
+struct sonypi_event {
+ u8 data;
+ u8 event;
+};
+
+/* The set of possible button release events */
+static struct sonypi_event sonypi_releaseev[] = {
+ { 0x00, SONYPI_EVENT_ANYBUTTON_RELEASED },
+ { 0, 0 }
+};
+
+/* The set of possible jogger events */
+static struct sonypi_event sonypi_joggerev[] = {
+ { 0x1f, SONYPI_EVENT_JOGDIAL_UP },
+ { 0x01, SONYPI_EVENT_JOGDIAL_DOWN },
+ { 0x5f, SONYPI_EVENT_JOGDIAL_UP_PRESSED },
+ { 0x41, SONYPI_EVENT_JOGDIAL_DOWN_PRESSED },
+ { 0x1e, SONYPI_EVENT_JOGDIAL_FAST_UP },
+ { 0x02, SONYPI_EVENT_JOGDIAL_FAST_DOWN },
+ { 0x5e, SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED },
+ { 0x42, SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED },
+ { 0x1d, SONYPI_EVENT_JOGDIAL_VFAST_UP },
+ { 0x03, SONYPI_EVENT_JOGDIAL_VFAST_DOWN },
+ { 0x5d, SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED },
+ { 0x43, SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED },
+ { 0x40, SONYPI_EVENT_JOGDIAL_PRESSED },
+ { 0, 0 }
+};
+
+/* The set of possible capture button events */
+static struct sonypi_event sonypi_captureev[] = {
+ { 0x05, SONYPI_EVENT_CAPTURE_PARTIALPRESSED },
+ { 0x07, SONYPI_EVENT_CAPTURE_PRESSED },
+ { 0x01, SONYPI_EVENT_CAPTURE_PARTIALRELEASED },
+ { 0, 0 }
+};
+
+/* The set of possible fnkeys events */
+static struct sonypi_event sonypi_fnkeyev[] = {
+ { 0x10, SONYPI_EVENT_FNKEY_ESC },
+ { 0x11, SONYPI_EVENT_FNKEY_F1 },
+ { 0x12, SONYPI_EVENT_FNKEY_F2 },
+ { 0x13, SONYPI_EVENT_FNKEY_F3 },
+ { 0x14, SONYPI_EVENT_FNKEY_F4 },
+ { 0x15, SONYPI_EVENT_FNKEY_F5 },
+ { 0x16, SONYPI_EVENT_FNKEY_F6 },
+ { 0x17, SONYPI_EVENT_FNKEY_F7 },
+ { 0x18, SONYPI_EVENT_FNKEY_F8 },
+ { 0x19, SONYPI_EVENT_FNKEY_F9 },
+ { 0x1a, SONYPI_EVENT_FNKEY_F10 },
+ { 0x1b, SONYPI_EVENT_FNKEY_F11 },
+ { 0x1c, SONYPI_EVENT_FNKEY_F12 },
+ { 0x1f, SONYPI_EVENT_FNKEY_RELEASED },
+ { 0x21, SONYPI_EVENT_FNKEY_1 },
+ { 0x22, SONYPI_EVENT_FNKEY_2 },
+ { 0x31, SONYPI_EVENT_FNKEY_D },
+ { 0x32, SONYPI_EVENT_FNKEY_E },
+ { 0x33, SONYPI_EVENT_FNKEY_F },
+ { 0x34, SONYPI_EVENT_FNKEY_S },
+ { 0x35, SONYPI_EVENT_FNKEY_B },
+ { 0x36, SONYPI_EVENT_FNKEY_ONLY },
+ { 0, 0 }
+};
+
+/* The set of possible program key events */
+static struct sonypi_event sonypi_pkeyev[] = {
+ { 0x01, SONYPI_EVENT_PKEY_P1 },
+ { 0x02, SONYPI_EVENT_PKEY_P2 },
+ { 0x04, SONYPI_EVENT_PKEY_P3 },
+ { 0x5c, SONYPI_EVENT_PKEY_P1 },
+ { 0, 0 }
+};
+
+/* The set of possible bluetooth events */
+static struct sonypi_event sonypi_blueev[] = {
+ { 0x55, SONYPI_EVENT_BLUETOOTH_PRESSED },
+ { 0x59, SONYPI_EVENT_BLUETOOTH_ON },
+ { 0x5a, SONYPI_EVENT_BLUETOOTH_OFF },
+ { 0, 0 }
+};
+
+/* The set of possible wireless events */
+static struct sonypi_event sonypi_wlessev[] = {
+ { 0x59, SONYPI_EVENT_WIRELESS_ON },
+ { 0x5a, SONYPI_EVENT_WIRELESS_OFF },
+ { 0, 0 }
+};
+
+/* The set of possible back button events */
+static struct sonypi_event sonypi_backev[] = {
+ { 0x20, SONYPI_EVENT_BACK_PRESSED },
+ { 0, 0 }
+};
+
+/* The set of possible help button events */
+static struct sonypi_event sonypi_helpev[] = {
+ { 0x3b, SONYPI_EVENT_HELP_PRESSED },
+ { 0, 0 }
+};
+
+
+/* The set of possible lid events */
+static struct sonypi_event sonypi_lidev[] = {
+ { 0x51, SONYPI_EVENT_LID_CLOSED },
+ { 0x50, SONYPI_EVENT_LID_OPENED },
+ { 0, 0 }
+};
+
+/* The set of possible zoom events */
+static struct sonypi_event sonypi_zoomev[] = {
+ { 0x39, SONYPI_EVENT_ZOOM_PRESSED },
+ { 0, 0 }
+};
+
+/* The set of possible thumbphrase events */
+static struct sonypi_event sonypi_thumbphraseev[] = {
+ { 0x3a, SONYPI_EVENT_THUMBPHRASE_PRESSED },
+ { 0, 0 }
+};
+
+/* The set of possible motioneye camera events */
+static struct sonypi_event sonypi_meyeev[] = {
+ { 0x00, SONYPI_EVENT_MEYE_FACE },
+ { 0x01, SONYPI_EVENT_MEYE_OPPOSITE },
+ { 0, 0 }
+};
+
+/* The set of possible memorystick events */
+static struct sonypi_event sonypi_memorystickev[] = {
+ { 0x53, SONYPI_EVENT_MEMORYSTICK_INSERT },
+ { 0x54, SONYPI_EVENT_MEMORYSTICK_EJECT },
+ { 0, 0 }
+};
+
+/* The set of possible battery events */
+static struct sonypi_event sonypi_batteryev[] = {
+ { 0x20, SONYPI_EVENT_BATTERY_INSERT },
+ { 0x30, SONYPI_EVENT_BATTERY_REMOVE },
+ { 0, 0 }
+};
+
+static struct sonypi_eventtypes {
+ int model;
+ u8 data;
+ unsigned long mask;
+ struct sonypi_event * events;
+} sony_pic_eventtypes[] = {
+ { SONYPI_DEVICE_TYPE1, 0, 0xffffffff, sonypi_releaseev },
+ { SONYPI_DEVICE_TYPE1, 0x70, SONYPI_MEYE_MASK, sonypi_meyeev },
+ { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_LID_MASK, sonypi_lidev },
+ { SONYPI_DEVICE_TYPE1, 0x60, SONYPI_CAPTURE_MASK, sonypi_captureev },
+ { SONYPI_DEVICE_TYPE1, 0x10, SONYPI_JOGGER_MASK, sonypi_joggerev },
+ { SONYPI_DEVICE_TYPE1, 0x20, SONYPI_FNKEY_MASK, sonypi_fnkeyev },
+ { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_BLUETOOTH_MASK, sonypi_blueev },
+ { SONYPI_DEVICE_TYPE1, 0x40, SONYPI_PKEY_MASK, sonypi_pkeyev },
+ { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev },
+ { SONYPI_DEVICE_TYPE1, 0x40, SONYPI_BATTERY_MASK, sonypi_batteryev },
+
+ { SONYPI_DEVICE_TYPE2, 0, 0xffffffff, sonypi_releaseev },
+ { SONYPI_DEVICE_TYPE2, 0x38, SONYPI_LID_MASK, sonypi_lidev },
+ { SONYPI_DEVICE_TYPE2, 0x11, SONYPI_JOGGER_MASK, sonypi_joggerev },
+ { SONYPI_DEVICE_TYPE2, 0x61, SONYPI_CAPTURE_MASK, sonypi_captureev },
+ { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev },
+ { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_BLUETOOTH_MASK, sonypi_blueev },
+ { SONYPI_DEVICE_TYPE2, 0x08, SONYPI_PKEY_MASK, sonypi_pkeyev },
+ { SONYPI_DEVICE_TYPE2, 0x11, SONYPI_BACK_MASK, sonypi_backev },
+ { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_HELP_MASK, sonypi_helpev },
+ { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_ZOOM_MASK, sonypi_zoomev },
+ { SONYPI_DEVICE_TYPE2, 0x20, SONYPI_THUMBPHRASE_MASK, sonypi_thumbphraseev },
+ { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev },
+ { SONYPI_DEVICE_TYPE2, 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev },
+ { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev },
+
+ { SONYPI_DEVICE_TYPE3, 0, 0xffffffff, sonypi_releaseev },
+ { SONYPI_DEVICE_TYPE3, 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev },
+ { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_WIRELESS_MASK, sonypi_wlessev },
+ { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev },
+ { SONYPI_DEVICE_TYPE3, 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev },
+ { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev },
+ { 0 }
+};
+
+static int sony_pic_detect_device_type(void)
+{
+ struct pci_dev *pcidev;
+ int model = 0;
+
+ if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82371AB_3, NULL)))
+ model = SONYPI_DEVICE_TYPE1;
+
+ else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_ICH6_1, NULL)))
+ model = SONYPI_DEVICE_TYPE3;
+
+ else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_ICH7_1, NULL)))
+ model = SONYPI_DEVICE_TYPE3;
+
+ else
+ model = SONYPI_DEVICE_TYPE2;
+
+ if (pcidev)
+ pci_dev_put(pcidev);
+
+ printk(KERN_INFO DRV_PFX "detected Type%d model\n",
+ model == SONYPI_DEVICE_TYPE1 ? 1 :
+ model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
+ return model;
+}
+
+#define ITERATIONS_LONG 10000
+#define ITERATIONS_SHORT 10
+#define wait_on_command(command, iterations) { \
+ unsigned int n = iterations; \
+ while (--n && (command)) \
+ udelay(1); \
+ if (!n) \
+ dprintk("command failed at %s : %s (line %d)\n", \
+ __FILE__, __FUNCTION__, __LINE__); \
+}
+
+static u8 sony_pic_call1(u8 dev)
+{
+ u8 v1, v2;
+
+ wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+ ITERATIONS_LONG);
+ outb(dev, spic_dev.cur_ioport->io.minimum + 4);
+ v1 = inb_p(spic_dev.cur_ioport->io.minimum + 4);
+ v2 = inb_p(spic_dev.cur_ioport->io.minimum);
+ dprintk("sony_pic_call1: 0x%.4x\n", (v2 << 8) | v1);
+ return v2;
+}
+
+static u8 sony_pic_call2(u8 dev, u8 fn)
+{
+ u8 v1;
+
+ wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+ ITERATIONS_LONG);
+ outb(dev, spic_dev.cur_ioport->io.minimum + 4);
+ wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+ ITERATIONS_LONG);
+ outb(fn, spic_dev.cur_ioport->io.minimum);
+ v1 = inb_p(spic_dev.cur_ioport->io.minimum);
+ dprintk("sony_pic_call2: 0x%.4x\n", v1);
+ return v1;
+}
+
+static u8 sony_pic_call3(u8 dev, u8 fn, u8 v)
+{
+ u8 v1;
+
+ wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
+ outb(dev, spic_dev.cur_ioport->io.minimum + 4);
+ wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
+ outb(fn, spic_dev.cur_ioport->io.minimum);
+ wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
+ outb(v, spic_dev.cur_ioport->io.minimum);
+ v1 = inb_p(spic_dev.cur_ioport->io.minimum);
+ dprintk("sony_pic_call3: 0x%.4x\n", v1);
+ return v1;
+}
+
+/* camera tests and poweron/poweroff */
+#define SONYPI_CAMERA_PICTURE 5
+#define SONYPI_CAMERA_CONTROL 0x10
+
+#define SONYPI_CAMERA_BRIGHTNESS 0
+#define SONYPI_CAMERA_CONTRAST 1
+#define SONYPI_CAMERA_HUE 2
+#define SONYPI_CAMERA_COLOR 3
+#define SONYPI_CAMERA_SHARPNESS 4
+
+#define SONYPI_CAMERA_EXPOSURE_MASK 0xC
+#define SONYPI_CAMERA_WHITE_BALANCE_MASK 0x3
+#define SONYPI_CAMERA_PICTURE_MODE_MASK 0x30
+#define SONYPI_CAMERA_MUTE_MASK 0x40
+
+/* the rest don't need a loop until not 0xff */
+#define SONYPI_CAMERA_AGC 6
+#define SONYPI_CAMERA_AGC_MASK 0x30
+#define SONYPI_CAMERA_SHUTTER_MASK 0x7
+
+#define SONYPI_CAMERA_SHUTDOWN_REQUEST 7
+#define SONYPI_CAMERA_CONTROL 0x10
+
+#define SONYPI_CAMERA_STATUS 7
+#define SONYPI_CAMERA_STATUS_READY 0x2
+#define SONYPI_CAMERA_STATUS_POSITION 0x4
+
+#define SONYPI_DIRECTION_BACKWARDS 0x4
+
+#define SONYPI_CAMERA_REVISION 8
+#define SONYPI_CAMERA_ROMVERSION 9
+
+static int __sony_pic_camera_ready(void)
+{
+ u8 v;
+
+ v = sony_pic_call2(0x8f, SONYPI_CAMERA_STATUS);
+ return (v != 0xff && (v & SONYPI_CAMERA_STATUS_READY));
+}
+
+static int __sony_pic_camera_off(void)
+{
+ if (!camera) {
+ printk(KERN_WARNING DRV_PFX "camera control not enabled\n");
+ return -ENODEV;
+ }
+
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_PICTURE,
+ SONYPI_CAMERA_MUTE_MASK),
+ ITERATIONS_SHORT);
+
+ if (spic_dev.camera_power) {
+ sony_pic_call2(0x91, 0);
+ spic_dev.camera_power = 0;
+ }
+ return 0;
+}
+
+static int __sony_pic_camera_on(void)
+{
+ int i, j, x;
+
+ if (!camera) {
+ printk(KERN_WARNING DRV_PFX "camera control not enabled\n");
+ return -ENODEV;
+ }
+
+ if (spic_dev.camera_power)
+ return 0;
+
+ for (j = 5; j > 0; j--) {
+
+ for (x = 0; x < 100 && sony_pic_call2(0x91, 0x1); x++)
+ msleep(10);
+ sony_pic_call1(0x93);
+
+ for (i = 400; i > 0; i--) {
+ if (__sony_pic_camera_ready())
+ break;
+ msleep(10);
+ }
+ if (i)
+ break;
+ }
+
+ if (j == 0) {
+ printk(KERN_WARNING DRV_PFX "failed to power on camera\n");
+ return -ENODEV;
+ }
+
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_CONTROL,
+ 0x5a),
+ ITERATIONS_SHORT);
+
+ spic_dev.camera_power = 1;
+ return 0;
+}
+
+/* External camera command (exported to the motion eye v4l driver) */
+int sony_pic_camera_command(int command, u8 value)
+{
+ if (!camera)
+ return -EIO;
+
+ mutex_lock(&spic_dev.lock);
+
+ switch (command) {
+ case SONY_PIC_COMMAND_SETCAMERA:
+ if (value)
+ __sony_pic_camera_on();
+ else
+ __sony_pic_camera_off();
+ break;
+ case SONY_PIC_COMMAND_SETCAMERABRIGHTNESS:
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_BRIGHTNESS, value),
+ ITERATIONS_SHORT);
+ break;
+ case SONY_PIC_COMMAND_SETCAMERACONTRAST:
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_CONTRAST, value),
+ ITERATIONS_SHORT);
+ break;
+ case SONY_PIC_COMMAND_SETCAMERAHUE:
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_HUE, value),
+ ITERATIONS_SHORT);
+ break;
+ case SONY_PIC_COMMAND_SETCAMERACOLOR:
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_COLOR, value),
+ ITERATIONS_SHORT);
+ break;
+ case SONY_PIC_COMMAND_SETCAMERASHARPNESS:
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_SHARPNESS, value),
+ ITERATIONS_SHORT);
+ break;
+ case SONY_PIC_COMMAND_SETCAMERAPICTURE:
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_PICTURE, value),
+ ITERATIONS_SHORT);
+ break;
+ case SONY_PIC_COMMAND_SETCAMERAAGC:
+ wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_AGC, value),
+ ITERATIONS_SHORT);
+ break;
+ default:
+ printk(KERN_ERR DRV_PFX "sony_pic_camera_command invalid: %d\n",
+ command);
+ break;
+ }
+ mutex_unlock(&spic_dev.lock);
+ return 0;
+}
+EXPORT_SYMBOL(sony_pic_camera_command);
+
+/* gprs/edge modem (SZ460N and SZ210P), thanks to Joshua Wise */
+static void sony_pic_set_wwanpower(u8 state)
+{
+ state = !!state;
+ mutex_lock(&spic_dev.lock);
+ if (spic_dev.wwan_power == state) {
+ mutex_unlock(&spic_dev.lock);
+ return;
+ }
+ sony_pic_call2(0xB0, state);
+ spic_dev.wwan_power = state;
+ mutex_unlock(&spic_dev.lock);
+}
+
+static ssize_t sony_pic_wwanpower_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ unsigned long value;
+ if (count > 31)
+ return -EINVAL;
+
+ value = simple_strtoul(buffer, NULL, 10);
+ sony_pic_set_wwanpower(value);
+
+ return count;
+}
+
+static ssize_t sony_pic_wwanpower_show(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ ssize_t count;
+ mutex_lock(&spic_dev.lock);
+ count = snprintf(buffer, PAGE_SIZE, "%d\n", spic_dev.wwan_power);
+ mutex_unlock(&spic_dev.lock);
+ return count;
+}
+
+/* bluetooth subsystem power state */
+static void __sony_pic_set_bluetoothpower(u8 state)
+{
+ state = !!state;
+ if (spic_dev.bluetooth_power == state)
+ return;
+ sony_pic_call2(0x96, state);
+ sony_pic_call1(0x82);
+ spic_dev.bluetooth_power = state;
+}
+
+static ssize_t sony_pic_bluetoothpower_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ unsigned long value;
+ if (count > 31)
+ return -EINVAL;
+
+ value = simple_strtoul(buffer, NULL, 10);
+ mutex_lock(&spic_dev.lock);
+ __sony_pic_set_bluetoothpower(value);
+ mutex_unlock(&spic_dev.lock);
+
+ return count;
+}
+
+static ssize_t sony_pic_bluetoothpower_show(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ ssize_t count = 0;
+ mutex_lock(&spic_dev.lock);
+ count = snprintf(buffer, PAGE_SIZE, "%d\n", spic_dev.bluetooth_power);
+ mutex_unlock(&spic_dev.lock);
+ return count;
+}
+
+/* fan speed */
+/* FAN0 information (reverse engineered from ACPI tables) */
+#define SONY_PIC_FAN0_STATUS 0x93
+static int sony_pic_set_fanspeed(unsigned long value)
+{
+ return ec_write(SONY_PIC_FAN0_STATUS, value);
+}
+
+static int sony_pic_get_fanspeed(u8 *value)
+{
+ return ec_read(SONY_PIC_FAN0_STATUS, value);
+}
+
+static ssize_t sony_pic_fanspeed_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ unsigned long value;
+ if (count > 31)
+ return -EINVAL;
+
+ value = simple_strtoul(buffer, NULL, 10);
+ if (sony_pic_set_fanspeed(value))
+ return -EIO;
+
+ return count;
+}
+
+static ssize_t sony_pic_fanspeed_show(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ u8 value = 0;
+ if (sony_pic_get_fanspeed(&value))
+ return -EIO;
+
+ return snprintf(buffer, PAGE_SIZE, "%d\n", value);
+}
+
+#define SPIC_ATTR(_name, _mode) \
+struct device_attribute spic_attr_##_name = __ATTR(_name, \
+ _mode, sony_pic_## _name ##_show, \
+ sony_pic_## _name ##_store)
+
+static SPIC_ATTR(bluetoothpower, 0644);
+static SPIC_ATTR(wwanpower, 0644);
+static SPIC_ATTR(fanspeed, 0644);
+
+static struct attribute *spic_attributes[] = {
+ &spic_attr_bluetoothpower.attr,
+ &spic_attr_wwanpower.attr,
+ &spic_attr_fanspeed.attr,
+ NULL
+};
+
+static struct attribute_group spic_attribute_group = {
+ .attrs = spic_attributes
+};
+
+/******** SONYPI compatibility **********/
+#ifdef CONFIG_SONY_LAPTOP_OLD
+
+/* battery / brightness / temperature addresses */
+#define SONYPI_BAT_FLAGS 0x81
+#define SONYPI_LCD_LIGHT 0x96
+#define SONYPI_BAT1_PCTRM 0xa0
+#define SONYPI_BAT1_LEFT 0xa2
+#define SONYPI_BAT1_MAXRT 0xa4
+#define SONYPI_BAT2_PCTRM 0xa8
+#define SONYPI_BAT2_LEFT 0xaa
+#define SONYPI_BAT2_MAXRT 0xac
+#define SONYPI_BAT1_MAXTK 0xb0
+#define SONYPI_BAT1_FULL 0xb2
+#define SONYPI_BAT2_MAXTK 0xb8
+#define SONYPI_BAT2_FULL 0xba
+#define SONYPI_TEMP_STATUS 0xC1
+
+struct sonypi_compat_s {
+ struct fasync_struct *fifo_async;
+ struct kfifo *fifo;
+ spinlock_t fifo_lock;
+ wait_queue_head_t fifo_proc_list;
+ atomic_t open_count;
+};
+static struct sonypi_compat_s sonypi_compat = {
+ .open_count = ATOMIC_INIT(0),
+};
+
+static int sonypi_misc_fasync(int fd, struct file *filp, int on)
+{
+ int retval;
+
+ retval = fasync_helper(fd, filp, on, &sonypi_compat.fifo_async);
+ if (retval < 0)
+ return retval;
+ return 0;
+}
+
+static int sonypi_misc_release(struct inode *inode, struct file *file)
+{
+ sonypi_misc_fasync(-1, file, 0);
+ atomic_dec(&sonypi_compat.open_count);
+ return 0;
+}
+
+static int sonypi_misc_open(struct inode *inode, struct file *file)
+{
+ /* Flush input queue on first open */
+ if (atomic_inc_return(&sonypi_compat.open_count) == 1)
+ kfifo_reset(sonypi_compat.fifo);
+ return 0;
+}
+
+static ssize_t sonypi_misc_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ ssize_t ret;
+ unsigned char c;
+
+ if ((kfifo_len(sonypi_compat.fifo) == 0) &&
+ (file->f_flags & O_NONBLOCK))
+ return -EAGAIN;
+
+ ret = wait_event_interruptible(sonypi_compat.fifo_proc_list,
+ kfifo_len(sonypi_compat.fifo) != 0);
+ if (ret)
+ return ret;
+
+ while (ret < count &&
+ (kfifo_get(sonypi_compat.fifo, &c, sizeof(c)) == sizeof(c))) {
+ if (put_user(c, buf++))
+ return -EFAULT;
+ ret++;
+ }
+
+ if (ret > 0) {
+ struct inode *inode = file->f_path.dentry->d_inode;
+ inode->i_atime = current_fs_time(inode->i_sb);
+ }
+
+ return ret;
+}
+
+static unsigned int sonypi_misc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &sonypi_compat.fifo_proc_list, wait);
+ if (kfifo_len(sonypi_compat.fifo))
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static int ec_read16(u8 addr, u16 *value)
+{
+ u8 val_lb, val_hb;
+ if (ec_read(addr, &val_lb))
+ return -1;
+ if (ec_read(addr + 1, &val_hb))
+ return -1;
+ *value = val_lb | (val_hb << 8);
+ return 0;
+}
+
+static int sonypi_misc_ioctl(struct inode *ip, struct file *fp,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret = 0;
+ void __user *argp = (void __user *)arg;
+ u8 val8;
+ u16 val16;
+ int value;
+
+ mutex_lock(&spic_dev.lock);
+ switch (cmd) {
+ case SONYPI_IOCGBRT:
+ if (sony_backlight_device == NULL) {
+ ret = -EIO;
+ break;
+ }
+ if (acpi_callgetfunc(sony_nc_acpi_handle, "GBRT", &value)) {
+ ret = -EIO;
+ break;
+ }
+ val8 = ((value & 0xff) - 1) << 5;
+ if (copy_to_user(argp, &val8, sizeof(val8)))
+ ret = -EFAULT;
+ break;
+ case SONYPI_IOCSBRT:
+ if (sony_backlight_device == NULL) {
+ ret = -EIO;
+ break;
+ }
+ if (copy_from_user(&val8, argp, sizeof(val8))) {
+ ret = -EFAULT;
+ break;
+ }
+ if (acpi_callsetfunc(sony_nc_acpi_handle, "SBRT",
+ (val8 >> 5) + 1, NULL)) {
+ ret = -EIO;
+ break;
+ }
+ /* sync the backlight device status */
+ sony_backlight_device->props.brightness =
+ sony_backlight_get_brightness(sony_backlight_device);
+ break;
+ case SONYPI_IOCGBAT1CAP:
+ if (ec_read16(SONYPI_BAT1_FULL, &val16)) {
+ ret = -EIO;
+ break;
+ }
+ if (copy_to_user(argp, &val16, sizeof(val16)))
+ ret = -EFAULT;
+ break;
+ case SONYPI_IOCGBAT1REM:
+ if (ec_read16(SONYPI_BAT1_LEFT, &val16)) {
+ ret = -EIO;
+ break;
+ }
+ if (copy_to_user(argp, &val16, sizeof(val16)))
+ ret = -EFAULT;
+ break;
+ case SONYPI_IOCGBAT2CAP:
+ if (ec_read16(SONYPI_BAT2_FULL, &val16)) {
+ ret = -EIO;
+ break;
+ }
+ if (copy_to_user(argp, &val16, sizeof(val16)))
+ ret = -EFAULT;
+ break;
+ case SONYPI_IOCGBAT2REM:
+ if (ec_read16(SONYPI_BAT2_LEFT, &val16)) {
+ ret = -EIO;
+ break;
+ }
+ if (copy_to_user(argp, &val16, sizeof(val16)))
+ ret = -EFAULT;
+ break;
+ case SONYPI_IOCGBATFLAGS:
+ if (ec_read(SONYPI_BAT_FLAGS, &val8)) {
+ ret = -EIO;
+ break;
+ }
+ val8 &= 0x07;
+ if (copy_to_user(argp, &val8, sizeof(val8)))
+ ret = -EFAULT;
+ break;
+ case SONYPI_IOCGBLUE:
+ val8 = spic_dev.bluetooth_power;
+ if (copy_to_user(argp, &val8, sizeof(val8)))
+ ret = -EFAULT;
+ break;
+ case SONYPI_IOCSBLUE:
+ if (copy_from_user(&val8, argp, sizeof(val8))) {
+ ret = -EFAULT;
+ break;
+ }
+ __sony_pic_set_bluetoothpower(val8);
+ break;
+ /* FAN Controls */
+ case SONYPI_IOCGFAN:
+ if (sony_pic_get_fanspeed(&val8)) {
+ ret = -EIO;
+ break;
+ }
+ if (copy_to_user(argp, &val8, sizeof(val8)))
+ ret = -EFAULT;
+ break;
+ case SONYPI_IOCSFAN:
+ if (copy_from_user(&val8, argp, sizeof(val8))) {
+ ret = -EFAULT;
+ break;
+ }
+ if (sony_pic_set_fanspeed(val8))
+ ret = -EIO;
+ break;
+ /* GET Temperature (useful under APM) */
+ case SONYPI_IOCGTEMP:
+ if (ec_read(SONYPI_TEMP_STATUS, &val8)) {
+ ret = -EIO;
+ break;
+ }
+ if (copy_to_user(argp, &val8, sizeof(val8)))
+ ret = -EFAULT;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&spic_dev.lock);
+ return ret;
+}
+
+static const struct file_operations sonypi_misc_fops = {
+ .owner = THIS_MODULE,
+ .read = sonypi_misc_read,
+ .poll = sonypi_misc_poll,
+ .open = sonypi_misc_open,
+ .release = sonypi_misc_release,
+ .fasync = sonypi_misc_fasync,
+ .ioctl = sonypi_misc_ioctl,
+};
+
+static struct miscdevice sonypi_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "sonypi",
+ .fops = &sonypi_misc_fops,
+};
+
+static void sonypi_compat_report_event(u8 event)
+{
+ kfifo_put(sonypi_compat.fifo, (unsigned char *)&event, sizeof(event));
+ kill_fasync(&sonypi_compat.fifo_async, SIGIO, POLL_IN);
+ wake_up_interruptible(&sonypi_compat.fifo_proc_list);
+}
+
+static int sonypi_compat_init(void)
+{
+ int error;
+
+ spin_lock_init(&sonypi_compat.fifo_lock);
+ sonypi_compat.fifo = kfifo_alloc(SONY_LAPTOP_BUF_SIZE, GFP_KERNEL,
+ &sonypi_compat.fifo_lock);
+ if (IS_ERR(sonypi_compat.fifo)) {
+ printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n");
+ return PTR_ERR(sonypi_compat.fifo);
+ }
+
+ init_waitqueue_head(&sonypi_compat.fifo_proc_list);
+
+ if (minor != -1)
+ sonypi_misc_device.minor = minor;
+ error = misc_register(&sonypi_misc_device);
+ if (error) {
+ printk(KERN_ERR DRV_PFX "misc_register failed\n");
+ goto err_free_kfifo;
+ }
+ if (minor == -1)
+ printk(KERN_INFO DRV_PFX "device allocated minor is %d\n",
+ sonypi_misc_device.minor);
+
+ return 0;
+
+err_free_kfifo:
+ kfifo_free(sonypi_compat.fifo);
+ return error;
+}
+
+static void sonypi_compat_exit(void)
+{
+ misc_deregister(&sonypi_misc_device);
+ kfifo_free(sonypi_compat.fifo);
+}
+#else
+static int sonypi_compat_init(void) { return 0; }
+static void sonypi_compat_exit(void) { }
+static void sonypi_compat_report_event(u8 event) { }
+#endif /* CONFIG_SONY_LAPTOP_OLD */
+
+/*
+ * ACPI callbacks
+ */
+static acpi_status
+sony_pic_read_possible_resource(struct acpi_resource *resource, void *context)
+{
+ u32 i;
+ struct sony_pic_dev *dev = (struct sony_pic_dev *)context;
+
+ switch (resource->type) {
+ case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+ case ACPI_RESOURCE_TYPE_END_DEPENDENT:
+ return AE_OK;
+
+ case ACPI_RESOURCE_TYPE_IRQ:
+ {
+ struct acpi_resource_irq *p = &resource->data.irq;
+ struct sony_pic_irq *interrupt = NULL;
+ if (!p || !p->interrupt_count) {
+ /*
+ * IRQ descriptors may have no IRQ# bits set,
+ * particularly those those w/ _STA disabled
+ */
+ dprintk("Blank IRQ resource\n");
+ return AE_OK;
+ }
+ for (i = 0; i < p->interrupt_count; i++) {
+ if (!p->interrupts[i]) {
+ printk(KERN_WARNING DRV_PFX
+ "Invalid IRQ %d\n",
+ p->interrupts[i]);
+ continue;
+ }
+ interrupt = kzalloc(sizeof(*interrupt),
+ GFP_KERNEL);
+ if (!interrupt)
+ return AE_ERROR;
+
+ list_add_tail(&interrupt->list, &dev->interrupts);
+ interrupt->irq.triggering = p->triggering;
+ interrupt->irq.polarity = p->polarity;
+ interrupt->irq.sharable = p->sharable;
+ interrupt->irq.interrupt_count = 1;
+ interrupt->irq.interrupts[0] = p->interrupts[i];
+ }
+ return AE_OK;
+ }
+ case ACPI_RESOURCE_TYPE_IO:
+ {
+ struct acpi_resource_io *io = &resource->data.io;
+ struct sony_pic_ioport *ioport = NULL;
+ if (!io) {
+ dprintk("Blank IO resource\n");
+ return AE_OK;
+ }
+
+ ioport = kzalloc(sizeof(*ioport), GFP_KERNEL);
+ if (!ioport)
+ return AE_ERROR;
+
+ list_add_tail(&ioport->list, &dev->ioports);
+ memcpy(&ioport->io, io, sizeof(*io));
+ return AE_OK;
+ }
+ default:
+ dprintk("Resource %d isn't an IRQ nor an IO port\n",
+ resource->type);
+
+ case ACPI_RESOURCE_TYPE_END_TAG:
+ return AE_OK;
+ }
+ return AE_CTRL_TERMINATE;
+}
+
+static int sony_pic_possible_resources(struct acpi_device *device)
+{
+ int result = 0;
+ acpi_status status = AE_OK;
+
+ if (!device)
+ return -EINVAL;
+
+ /* get device status */
+ /* see acpi_pci_link_get_current acpi_pci_link_get_possible */
+ dprintk("Evaluating _STA\n");
+ result = acpi_bus_get_status(device);
+ if (result) {
+ printk(KERN_WARNING DRV_PFX "Unable to read status\n");
+ goto end;
+ }
+
+ if (!device->status.enabled)
+ dprintk("Device disabled\n");
+ else
+ dprintk("Device enabled\n");
+
+ /*
+ * Query and parse 'method'
+ */
+ dprintk("Evaluating %s\n", METHOD_NAME__PRS);
+ status = acpi_walk_resources(device->handle, METHOD_NAME__PRS,
+ sony_pic_read_possible_resource, &spic_dev);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING DRV_PFX
+ "Failure evaluating %s\n",
+ METHOD_NAME__PRS);
+ result = -ENODEV;
+ }
+end:
+ return result;
+}
+
+/*
+ * Disable the spic device by calling its _DIS method
+ */
+static int sony_pic_disable(struct acpi_device *device)
+{
+ if (ACPI_FAILURE(acpi_evaluate_object(device->handle, "_DIS", 0, NULL)))
+ return -ENXIO;
+
+ dprintk("Device disabled\n");
+ return 0;
+}
+
+
+/*
+ * Based on drivers/acpi/pci_link.c:acpi_pci_link_set
+ *
+ * Call _SRS to set current resources
+ */
+static int sony_pic_enable(struct acpi_device *device,
+ struct sony_pic_ioport *ioport, struct sony_pic_irq *irq)
+{
+ acpi_status status;
+ int result = 0;
+ struct {
+ struct acpi_resource io_res;
+ struct acpi_resource irq_res;
+ struct acpi_resource end;
+ } *resource;
+ struct acpi_buffer buffer = { 0, NULL };
+
+ if (!ioport || !irq)
+ return -EINVAL;
+
+ /* init acpi_buffer */
+ resource = kzalloc(sizeof(*resource) + 1, GFP_KERNEL);
+ if (!resource)
+ return -ENOMEM;
+
+ buffer.length = sizeof(*resource) + 1;
+ buffer.pointer = resource;
+
+ /* setup io resource */
+ resource->io_res.type = ACPI_RESOURCE_TYPE_IO;
+ resource->io_res.length = sizeof(struct acpi_resource);
+ memcpy(&resource->io_res.data.io, &ioport->io,
+ sizeof(struct acpi_resource_io));
+
+ /* setup irq resource */
+ resource->irq_res.type = ACPI_RESOURCE_TYPE_IRQ;
+ resource->irq_res.length = sizeof(struct acpi_resource);
+ memcpy(&resource->irq_res.data.irq, &irq->irq,
+ sizeof(struct acpi_resource_irq));
+ /* we requested a shared irq */
+ resource->irq_res.data.irq.sharable = ACPI_SHARED;
+
+ resource->end.type = ACPI_RESOURCE_TYPE_END_TAG;
+
+ /* Attempt to set the resource */
+ dprintk("Evaluating _SRS\n");
+ status = acpi_set_current_resources(device->handle, &buffer);
+
+ /* check for total failure */
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR DRV_PFX "Error evaluating _SRS");
+ result = -ENODEV;
+ goto end;
+ }
+
+ /* Necessary device initializations calls (from sonypi) */
+ sony_pic_call1(0x82);
+ sony_pic_call2(0x81, 0xff);
+ sony_pic_call1(compat ? 0x92 : 0x82);
+
+end:
+ kfree(resource);
+ return result;
+}
+
+/*****************
+ *
+ * ISR: some event is available
+ *
+ *****************/
+static irqreturn_t sony_pic_irq(int irq, void *dev_id)
+{
+ int i, j;
+ u32 port_val = 0;
+ u8 ev = 0;
+ u8 data_mask = 0;
+ u8 device_event = 0;
+
+ struct sony_pic_dev *dev = (struct sony_pic_dev *) dev_id;
+
+ acpi_os_read_port(dev->cur_ioport->io.minimum, &port_val,
+ dev->cur_ioport->io.address_length);
+ ev = port_val & SONY_PIC_EV_MASK;
+ data_mask = 0xff & (port_val >> (dev->cur_ioport->io.address_length - 8));
+
+ dprintk("event (0x%.8x [%.2x] [%.2x]) at port 0x%.4x\n",
+ port_val, ev, data_mask, dev->cur_ioport->io.minimum);
+
+ if (ev == 0x00 || ev == 0xff)
+ return IRQ_HANDLED;
+
+ for (i = 0; sony_pic_eventtypes[i].model; i++) {
+
+ if (spic_dev.model != sony_pic_eventtypes[i].model)
+ continue;
+
+ if ((data_mask & sony_pic_eventtypes[i].data) !=
+ sony_pic_eventtypes[i].data)
+ continue;
+
+ if (!(mask & sony_pic_eventtypes[i].mask))
+ continue;
+
+ for (j = 0; sony_pic_eventtypes[i].events[j].event; j++) {
+ if (ev == sony_pic_eventtypes[i].events[j].data) {
+ device_event =
+ sony_pic_eventtypes[i].events[j].event;
+ goto found;
+ }
+ }
+ }
+ return IRQ_HANDLED;
+
+found:
+ sony_laptop_report_input_event(device_event);
+ acpi_bus_generate_event(spic_dev.acpi_dev, 1, device_event);
+ sonypi_compat_report_event(device_event);
+
+ return IRQ_HANDLED;
+}
+
+/*****************
+ *
+ * ACPI driver
+ *
+ *****************/
+static int sony_pic_remove(struct acpi_device *device, int type)
+{
+ struct sony_pic_ioport *io, *tmp_io;
+ struct sony_pic_irq *irq, *tmp_irq;
+
+ sonypi_compat_exit();
+
+ if (sony_pic_disable(device)) {
+ printk(KERN_ERR DRV_PFX "Couldn't disable device.\n");
+ return -ENXIO;
+ }
+
+ free_irq(spic_dev.cur_irq->irq.interrupts[0], &spic_dev);
+ release_region(spic_dev.cur_ioport->io.minimum,
+ spic_dev.cur_ioport->io.address_length);
+
+ sony_laptop_remove_input();
+
+ /* pf attrs */
+ sysfs_remove_group(&sony_pf_device->dev.kobj, &spic_attribute_group);
+ sony_pf_remove();
+
+ list_for_each_entry_safe(io, tmp_io, &spic_dev.ioports, list) {
+ list_del(&io->list);
+ kfree(io);
+ }
+ list_for_each_entry_safe(irq, tmp_irq, &spic_dev.interrupts, list) {
+ list_del(&irq->list);
+ kfree(irq);
+ }
+ spic_dev.cur_ioport = NULL;
+ spic_dev.cur_irq = NULL;
+
+ dprintk(SONY_PIC_DRIVER_NAME " removed.\n");
+ return 0;
+}
+
+static int sony_pic_add(struct acpi_device *device)
+{
+ int result;
+ struct sony_pic_ioport *io, *tmp_io;
+ struct sony_pic_irq *irq, *tmp_irq;
+
+ printk(KERN_INFO DRV_PFX "%s v%s.\n",
+ SONY_PIC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
+
+ spic_dev.acpi_dev = device;
+ strcpy(acpi_device_class(device), "sony/hotkey");
+ spic_dev.model = sony_pic_detect_device_type();
+ mutex_init(&spic_dev.lock);
+
+ /* read _PRS resources */
+ result = sony_pic_possible_resources(device);
+ if (result) {
+ printk(KERN_ERR DRV_PFX
+ "Unabe to read possible resources.\n");
+ goto err_free_resources;
+ }
+
+ /* setup input devices and helper fifo */
+ result = sony_laptop_setup_input();
+ if (result) {
+ printk(KERN_ERR DRV_PFX
+ "Unabe to create input devices.\n");
+ goto err_free_resources;
+ }
+
+ /* request io port */
+ list_for_each_entry(io, &spic_dev.ioports, list) {
+ if (request_region(io->io.minimum, io->io.address_length,
+ "Sony Programable I/O Device")) {
+ dprintk("I/O port: 0x%.4x (0x%.4x) + 0x%.2x\n",
+ io->io.minimum, io->io.maximum,
+ io->io.address_length);
+ spic_dev.cur_ioport = io;
+ break;
+ }
+ }
+ if (!spic_dev.cur_ioport) {
+ printk(KERN_ERR DRV_PFX "Failed to request_region.\n");
+ result = -ENODEV;
+ goto err_remove_input;
+ }
+
+ /* request IRQ */
+ list_for_each_entry(irq, &spic_dev.interrupts, list) {
+ if (!request_irq(irq->irq.interrupts[0], sony_pic_irq,
+ IRQF_SHARED, "sony-laptop", &spic_dev)) {
+ dprintk("IRQ: %d - triggering: %d - "
+ "polarity: %d - shr: %d\n",
+ irq->irq.interrupts[0],
+ irq->irq.triggering,
+ irq->irq.polarity,
+ irq->irq.sharable);
+ spic_dev.cur_irq = irq;
+ break;
+ }
+ }
+ if (!spic_dev.cur_irq) {
+ printk(KERN_ERR DRV_PFX "Failed to request_irq.\n");
+ result = -ENODEV;
+ goto err_release_region;
+ }
+
+ /* set resource status _SRS */
+ result = sony_pic_enable(device, spic_dev.cur_ioport, spic_dev.cur_irq);
+ if (result) {
+ printk(KERN_ERR DRV_PFX "Couldn't enable device.\n");
+ goto err_free_irq;
+ }
+
+ spic_dev.bluetooth_power = -1;
+ /* create device attributes */
+ result = sony_pf_add();
+ if (result)
+ goto err_disable_device;
+
+ result = sysfs_create_group(&sony_pf_device->dev.kobj, &spic_attribute_group);
+ if (result)
+ goto err_remove_pf;
+
+ if (sonypi_compat_init())
+ goto err_remove_pf;
+
+ return 0;
+
+err_remove_pf:
+ sony_pf_remove();
+
+err_disable_device:
+ sony_pic_disable(device);
+
+err_free_irq:
+ free_irq(spic_dev.cur_irq->irq.interrupts[0], &spic_dev);
+
+err_release_region:
+ release_region(spic_dev.cur_ioport->io.minimum,
+ spic_dev.cur_ioport->io.address_length);
+
+err_remove_input:
+ sony_laptop_remove_input();
+
+err_free_resources:
+ list_for_each_entry_safe(io, tmp_io, &spic_dev.ioports, list) {
+ list_del(&io->list);
+ kfree(io);
+ }
+ list_for_each_entry_safe(irq, tmp_irq, &spic_dev.interrupts, list) {
+ list_del(&irq->list);
+ kfree(irq);
+ }
+ spic_dev.cur_ioport = NULL;
+ spic_dev.cur_irq = NULL;
+
+ return result;
+}
+
+static int sony_pic_suspend(struct acpi_device *device, pm_message_t state)
+{
+ if (sony_pic_disable(device))
+ return -ENXIO;
+ return 0;
+}
+
+static int sony_pic_resume(struct acpi_device *device)
+{
+ sony_pic_enable(device, spic_dev.cur_ioport, spic_dev.cur_irq);
+ return 0;
+}
+
+static struct acpi_driver sony_pic_driver = {
+ .name = SONY_PIC_DRIVER_NAME,
+ .class = SONY_PIC_CLASS,
+ .ids = SONY_PIC_HID,
+ .owner = THIS_MODULE,
+ .ops = {
+ .add = sony_pic_add,
+ .remove = sony_pic_remove,
+ .suspend = sony_pic_suspend,
+ .resume = sony_pic_resume,
+ },
+};
+
+static struct dmi_system_id __initdata sonypi_dmi_table[] = {
+ {
+ .ident = "Sony Vaio",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PCG-"),
+ },
+ },
+ {
+ .ident = "Sony Vaio",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-"),
+ },
+ },
+ { }
+};
+
+static int __init sony_laptop_init(void)
+{
+ int result;
+
+ if (!no_spic && dmi_check_system(sonypi_dmi_table)) {
+ result = acpi_bus_register_driver(&sony_pic_driver);
+ if (result) {
+ printk(KERN_ERR DRV_PFX
+ "Unable to register SPIC driver.");
+ goto out;
+ }
+ }
+
+ result = acpi_bus_register_driver(&sony_nc_driver);
+ if (result) {
+ printk(KERN_ERR DRV_PFX "Unable to register SNC driver.");
+ goto out_unregister_pic;
+ }
+
+ return 0;
+
+out_unregister_pic:
+ if (!no_spic)
+ acpi_bus_unregister_driver(&sony_pic_driver);
+out:
+ return result;
}
-static void __exit sony_acpi_exit(void)
+static void __exit sony_laptop_exit(void)
{
- acpi_bus_unregister_driver(&sony_acpi_driver);
+ acpi_bus_unregister_driver(&sony_nc_driver);
+ if (!no_spic)
+ acpi_bus_unregister_driver(&sony_pic_driver);
}
-module_init(sony_acpi_init);
-module_exit(sony_acpi_exit);
+module_init(sony_laptop_init);
+module_exit(sony_laptop_exit);
--- /dev/null
+/*
+ * thinkpad_acpi.c - ThinkPad ACPI Extras
+ *
+ *
+ * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
+ * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define IBM_VERSION "0.14"
+#define TPACPI_SYSFS_VERSION 0x000100
+
+/*
+ * Changelog:
+ * 2007-03-27 0.14 renamed to thinkpad_acpi and moved to
+ * drivers/misc.
+ *
+ * 2006-11-22 0.13 new maintainer
+ * changelog now lives in git commit history, and will
+ * not be updated further in-file.
+ *
+ * 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels
+ * 2005-03-17 0.11 support for 600e, 770x
+ * thanks to Jamie Lentin <lentinj@dial.pipex.com>
+ * support for 770e, G41
+ * G40 and G41 don't have a thinklight
+ * temperatures no longer experimental
+ * experimental brightness control
+ * experimental volume control
+ * experimental fan enable/disable
+ * 2005-01-16 0.10 fix module loading on R30, R31
+ * 2005-01-16 0.9 support for 570, R30, R31
+ * ultrabay support on A22p, A3x
+ * limit arg for cmos, led, beep, drop experimental status
+ * more capable led control on A21e, A22p, T20-22, X20
+ * experimental temperatures and fan speed
+ * experimental embedded controller register dump
+ * mark more functions as __init, drop incorrect __exit
+ * use MODULE_VERSION
+ * thanks to Henrik Brix Andersen <brix@gentoo.org>
+ * fix parameter passing on module loading
+ * thanks to Rusty Russell <rusty@rustcorp.com.au>
+ * thanks to Jim Radford <radford@blackbean.org>
+ * 2004-11-08 0.8 fix init error case, don't return from a macro
+ * thanks to Chris Wright <chrisw@osdl.org>
+ * 2004-10-23 0.7 fix module loading on A21e, A22p, T20, T21, X20
+ * fix led control on A21e
+ * 2004-10-19 0.6 use acpi_bus_register_driver() to claim HKEY device
+ * 2004-10-18 0.5 thinklight support on A21e, G40, R32, T20, T21, X20
+ * proc file format changed
+ * video_switch command
+ * experimental cmos control
+ * experimental led control
+ * experimental acpi sounds
+ * 2004-09-16 0.4 support for module parameters
+ * hotkey mask can be prefixed by 0x
+ * video output switching
+ * video expansion control
+ * ultrabay eject support
+ * removed lcd brightness/on/off control, didn't work
+ * 2004-08-17 0.3 support for R40
+ * lcd off, brightness control
+ * thinklight on/off
+ * 2004-08-14 0.2 support for T series, X20
+ * bluetooth enable/disable
+ * hotkey events disabled by default
+ * removed fan control, currently useless
+ * 2004-08-09 0.1 initial release, support for X series
+ */
+
+#include "thinkpad_acpi.h"
+
+MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+MODULE_DESCRIPTION(IBM_DESC);
+MODULE_VERSION(IBM_VERSION);
+MODULE_LICENSE("GPL");
+
+/* Please remove this in year 2009 */
+MODULE_ALIAS("ibm_acpi");
+
+#define __unused __attribute__ ((unused))
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * ACPI Helpers and device model
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/*************************************************************************
+ * ACPI basic handles
+ */
+
+static acpi_handle root_handle = NULL;
+
+#define IBM_HANDLE(object, parent, paths...) \
+ static acpi_handle object##_handle; \
+ static acpi_handle *object##_parent = &parent##_handle; \
+ static char *object##_path; \
+ static char *object##_paths[] = { paths }
+
+IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */
+ "\\_SB.PCI.ISA.EC", /* 570 */
+ "\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */
+ "\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */
+ "\\_SB.PCI0.AD4S.EC0", /* i1400, R30 */
+ "\\_SB.PCI0.ICH3.EC0", /* R31 */
+ "\\_SB.PCI0.LPC.EC", /* all others */
+ );
+
+IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */
+IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */
+
+
+/*************************************************************************
+ * Misc ACPI handles
+ */
+
+IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */
+ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */
+ "\\CMS", /* R40, R40e */
+ ); /* all others */
+
+IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */
+ "^HKEY", /* R30, R31 */
+ "HKEY", /* all others */
+ ); /* 570 */
+
+
+/*************************************************************************
+ * ACPI helpers
+ */
+
+static int acpi_evalf(acpi_handle handle,
+ void *res, char *method, char *fmt, ...)
+{
+ char *fmt0 = fmt;
+ struct acpi_object_list params;
+ union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
+ struct acpi_buffer result, *resultp;
+ union acpi_object out_obj;
+ acpi_status status;
+ va_list ap;
+ char res_type;
+ int success;
+ int quiet;
+
+ if (!*fmt) {
+ printk(IBM_ERR "acpi_evalf() called with empty format\n");
+ return 0;
+ }
+
+ if (*fmt == 'q') {
+ quiet = 1;
+ fmt++;
+ } else
+ quiet = 0;
+
+ res_type = *(fmt++);
+
+ params.count = 0;
+ params.pointer = &in_objs[0];
+
+ va_start(ap, fmt);
+ while (*fmt) {
+ char c = *(fmt++);
+ switch (c) {
+ case 'd': /* int */
+ in_objs[params.count].integer.value = va_arg(ap, int);
+ in_objs[params.count++].type = ACPI_TYPE_INTEGER;
+ break;
+ /* add more types as needed */
+ default:
+ printk(IBM_ERR "acpi_evalf() called "
+ "with invalid format character '%c'\n", c);
+ return 0;
+ }
+ }
+ va_end(ap);
+
+ if (res_type != 'v') {
+ result.length = sizeof(out_obj);
+ result.pointer = &out_obj;
+ resultp = &result;
+ } else
+ resultp = NULL;
+
+ status = acpi_evaluate_object(handle, method, ¶ms, resultp);
+
+ switch (res_type) {
+ case 'd': /* int */
+ if (res)
+ *(int *)res = out_obj.integer.value;
+ success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
+ break;
+ case 'v': /* void */
+ success = status == AE_OK;
+ break;
+ /* add more types as needed */
+ default:
+ printk(IBM_ERR "acpi_evalf() called "
+ "with invalid format character '%c'\n", res_type);
+ return 0;
+ }
+
+ if (!success && !quiet)
+ printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
+ method, fmt0, status);
+
+ return success;
+}
+
+static void __unused acpi_print_int(acpi_handle handle, char *method)
+{
+ int i;
+
+ if (acpi_evalf(handle, &i, method, "d"))
+ printk(IBM_INFO "%s = 0x%x\n", method, i);
+ else
+ printk(IBM_ERR "error calling %s\n", method);
+}
+
+static int acpi_ec_read(int i, u8 * p)
+{
+ int v;
+
+ if (ecrd_handle) {
+ if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
+ return 0;
+ *p = v;
+ } else {
+ if (ec_read(i, p) < 0)
+ return 0;
+ }
+
+ return 1;
+}
+
+static int acpi_ec_write(int i, u8 v)
+{
+ if (ecwr_handle) {
+ if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
+ return 0;
+ } else {
+ if (ec_write(i, v) < 0)
+ return 0;
+ }
+
+ return 1;
+}
+
+static int _sta(acpi_handle handle)
+{
+ int status;
+
+ if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
+ status = 0;
+
+ return status;
+}
+
+static int issue_thinkpad_cmos_command(int cmos_cmd)
+{
+ if (!cmos_handle)
+ return -ENXIO;
+
+ if (!acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd))
+ return -EIO;
+
+ return 0;
+}
+
+/*************************************************************************
+ * ACPI device model
+ */
+
+static void drv_acpi_handle_init(char *name,
+ acpi_handle *handle, acpi_handle parent,
+ char **paths, int num_paths, char **path)
+{
+ int i;
+ acpi_status status;
+
+ vdbg_printk(TPACPI_DBG_INIT, "trying to locate ACPI handle for %s\n",
+ name);
+
+ for (i = 0; i < num_paths; i++) {
+ status = acpi_get_handle(parent, paths[i], handle);
+ if (ACPI_SUCCESS(status)) {
+ *path = paths[i];
+ dbg_printk(TPACPI_DBG_INIT,
+ "Found ACPI handle %s for %s\n",
+ *path, name);
+ return;
+ }
+ }
+
+ vdbg_printk(TPACPI_DBG_INIT, "ACPI handle for %s not found\n",
+ name);
+ *handle = NULL;
+}
+
+static void dispatch_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+ struct ibm_struct *ibm = data;
+
+ if (!ibm || !ibm->acpi || !ibm->acpi->notify)
+ return;
+
+ ibm->acpi->notify(ibm, event);
+}
+
+static int __init setup_acpi_notify(struct ibm_struct *ibm)
+{
+ acpi_status status;
+ int rc;
+
+ BUG_ON(!ibm->acpi);
+
+ if (!*ibm->acpi->handle)
+ return 0;
+
+ vdbg_printk(TPACPI_DBG_INIT,
+ "setting up ACPI notify for %s\n", ibm->name);
+
+ rc = acpi_bus_get_device(*ibm->acpi->handle, &ibm->acpi->device);
+ if (rc < 0) {
+ printk(IBM_ERR "acpi_bus_get_device(%s) failed: %d\n",
+ ibm->name, rc);
+ return -ENODEV;
+ }
+
+ acpi_driver_data(ibm->acpi->device) = ibm;
+ sprintf(acpi_device_class(ibm->acpi->device), "%s/%s",
+ IBM_ACPI_EVENT_PREFIX,
+ ibm->name);
+
+ status = acpi_install_notify_handler(*ibm->acpi->handle,
+ ibm->acpi->type, dispatch_acpi_notify, ibm);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_ALREADY_EXISTS) {
+ printk(IBM_NOTICE "another device driver is already handling %s events\n",
+ ibm->name);
+ } else {
+ printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
+ ibm->name, status);
+ }
+ return -ENODEV;
+ }
+ ibm->flags.acpi_notify_installed = 1;
+ return 0;
+}
+
+static int __init tpacpi_device_add(struct acpi_device *device)
+{
+ return 0;
+}
+
+static int __init register_tpacpi_subdriver(struct ibm_struct *ibm)
+{
+ int rc;
+
+ dbg_printk(TPACPI_DBG_INIT,
+ "registering %s as an ACPI driver\n", ibm->name);
+
+ BUG_ON(!ibm->acpi);
+
+ ibm->acpi->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
+ if (!ibm->acpi->driver) {
+ printk(IBM_ERR "kzalloc(ibm->driver) failed\n");
+ return -ENOMEM;
+ }
+
+ sprintf(ibm->acpi->driver->name, "%s_%s", IBM_NAME, ibm->name);
+ ibm->acpi->driver->ids = ibm->acpi->hid;
+ ibm->acpi->driver->ops.add = &tpacpi_device_add;
+
+ rc = acpi_bus_register_driver(ibm->acpi->driver);
+ if (rc < 0) {
+ printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
+ ibm->acpi->hid, rc);
+ kfree(ibm->acpi->driver);
+ ibm->acpi->driver = NULL;
+ } else if (!rc)
+ ibm->flags.acpi_driver_registered = 1;
+
+ return rc;
+}
+
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Procfs Helpers
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+static int dispatch_procfs_read(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ struct ibm_struct *ibm = data;
+ int len;
+
+ if (!ibm || !ibm->read)
+ return -EINVAL;
+
+ len = ibm->read(page);
+ if (len < 0)
+ return len;
+
+ if (len <= off + count)
+ *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len > count)
+ len = count;
+ if (len < 0)
+ len = 0;
+
+ return len;
+}
+
+static int dispatch_procfs_write(struct file *file,
+ const char __user * userbuf,
+ unsigned long count, void *data)
+{
+ struct ibm_struct *ibm = data;
+ char *kernbuf;
+ int ret;
+
+ if (!ibm || !ibm->write)
+ return -EINVAL;
+
+ kernbuf = kmalloc(count + 2, GFP_KERNEL);
+ if (!kernbuf)
+ return -ENOMEM;
+
+ if (copy_from_user(kernbuf, userbuf, count)) {
+ kfree(kernbuf);
+ return -EFAULT;
+ }
+
+ kernbuf[count] = 0;
+ strcat(kernbuf, ",");
+ ret = ibm->write(kernbuf);
+ if (ret == 0)
+ ret = count;
+
+ kfree(kernbuf);
+
+ return ret;
+}
+
+static char *next_cmd(char **cmds)
+{
+ char *start = *cmds;
+ char *end;
+
+ while ((end = strchr(start, ',')) && end == start)
+ start = end + 1;
+
+ if (!end)
+ return NULL;
+
+ *end = 0;
+ *cmds = end + 1;
+ return start;
+}
+
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Device model: hwmon and platform
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+static struct platform_device *tpacpi_pdev = NULL;
+static struct class_device *tpacpi_hwmon = NULL;
+
+static struct platform_driver tpacpi_pdriver = {
+ .driver = {
+ .name = IBM_DRVR_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+
+/*************************************************************************
+ * thinkpad-acpi driver attributes
+ */
+
+/* interface_version --------------------------------------------------- */
+static ssize_t tpacpi_driver_interface_version_show(
+ struct device_driver *drv,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "0x%08x\n", TPACPI_SYSFS_VERSION);
+}
+
+static DRIVER_ATTR(interface_version, S_IRUGO,
+ tpacpi_driver_interface_version_show, NULL);
+
+/* debug_level --------------------------------------------------------- */
+static ssize_t tpacpi_driver_debug_show(struct device_driver *drv,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", dbg_level);
+}
+
+static ssize_t tpacpi_driver_debug_store(struct device_driver *drv,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+
+ if (parse_strtoul(buf, 0xffff, &t))
+ return -EINVAL;
+
+ dbg_level = t;
+
+ return count;
+}
+
+static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO,
+ tpacpi_driver_debug_show, tpacpi_driver_debug_store);
+
+/* version ------------------------------------------------------------- */
+static ssize_t tpacpi_driver_version_show(struct device_driver *drv,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s v%s\n", IBM_DESC, IBM_VERSION);
+}
+
+static DRIVER_ATTR(version, S_IRUGO,
+ tpacpi_driver_version_show, NULL);
+
+/* --------------------------------------------------------------------- */
+
+static struct driver_attribute* tpacpi_driver_attributes[] = {
+ &driver_attr_debug_level, &driver_attr_version,
+ &driver_attr_interface_version,
+};
+
+static int __init tpacpi_create_driver_attributes(struct device_driver *drv)
+{
+ int i, res;
+
+ i = 0;
+ res = 0;
+ while (!res && i < ARRAY_SIZE(tpacpi_driver_attributes)) {
+ res = driver_create_file(drv, tpacpi_driver_attributes[i]);
+ i++;
+ }
+
+ return res;
+}
+
+static void tpacpi_remove_driver_attributes(struct device_driver *drv)
+{
+ int i;
+
+ for(i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++)
+ driver_remove_file(drv, tpacpi_driver_attributes[i]);
+}
+
+/*************************************************************************
+ * sysfs support helpers
+ */
+
+struct attribute_set_obj {
+ struct attribute_set s;
+ struct attribute *a;
+} __attribute__((packed));
+
+static struct attribute_set *create_attr_set(unsigned int max_members,
+ const char* name)
+{
+ struct attribute_set_obj *sobj;
+
+ if (max_members == 0)
+ return NULL;
+
+ /* Allocates space for implicit NULL at the end too */
+ sobj = kzalloc(sizeof(struct attribute_set_obj) +
+ max_members * sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!sobj)
+ return NULL;
+ sobj->s.max_members = max_members;
+ sobj->s.group.attrs = &sobj->a;
+ sobj->s.group.name = name;
+
+ return &sobj->s;
+}
+
+/* not multi-threaded safe, use it in a single thread per set */
+static int add_to_attr_set(struct attribute_set* s, struct attribute *attr)
+{
+ if (!s || !attr)
+ return -EINVAL;
+
+ if (s->members >= s->max_members)
+ return -ENOMEM;
+
+ s->group.attrs[s->members] = attr;
+ s->members++;
+
+ return 0;
+}
+
+static int add_many_to_attr_set(struct attribute_set* s,
+ struct attribute **attr,
+ unsigned int count)
+{
+ int i, res;
+
+ for (i = 0; i < count; i++) {
+ res = add_to_attr_set(s, attr[i]);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+static void delete_attr_set(struct attribute_set* s, struct kobject *kobj)
+{
+ sysfs_remove_group(kobj, &s->group);
+ destroy_attr_set(s);
+}
+
+static int parse_strtoul(const char *buf,
+ unsigned long max, unsigned long *value)
+{
+ char *endp;
+
+ *value = simple_strtoul(buf, &endp, 0);
+ while (*endp && isspace(*endp))
+ endp++;
+ if (*endp || *value > max)
+ return -EINVAL;
+
+ return 0;
+}
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Subdrivers
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/*************************************************************************
+ * thinkpad-acpi init subdriver
+ */
+
+static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm)
+{
+ printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
+ printk(IBM_INFO "%s\n", IBM_URL);
+
+ if (ibm_thinkpad_ec_found)
+ printk(IBM_INFO "ThinkPad EC firmware %s\n",
+ ibm_thinkpad_ec_found);
+
+ return 0;
+}
+
+static int thinkpad_acpi_driver_read(char *p)
+{
+ int len = 0;
+
+ len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
+ len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
+
+ return len;
+}
+
+static struct ibm_struct thinkpad_acpi_driver_data = {
+ .name = "driver",
+ .read = thinkpad_acpi_driver_read,
+};
+
+/*************************************************************************
+ * Hotkey subdriver
+ */
+
+static int hotkey_orig_status;
+static int hotkey_orig_mask;
+
+static struct attribute_set *hotkey_dev_attributes = NULL;
+
+/* sysfs hotkey enable ------------------------------------------------- */
+static ssize_t hotkey_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res, status, mask;
+
+ res = hotkey_get(&status, &mask);
+ if (res)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", status);
+}
+
+static ssize_t hotkey_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+ int res, status, mask;
+
+ if (parse_strtoul(buf, 1, &t))
+ return -EINVAL;
+
+ res = hotkey_get(&status, &mask);
+ if (!res)
+ res = hotkey_set(t, mask);
+
+ return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_hotkey_enable =
+ __ATTR(enable, S_IWUSR | S_IRUGO,
+ hotkey_enable_show, hotkey_enable_store);
+
+/* sysfs hotkey mask --------------------------------------------------- */
+static ssize_t hotkey_mask_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res, status, mask;
+
+ res = hotkey_get(&status, &mask);
+ if (res)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", mask);
+}
+
+static ssize_t hotkey_mask_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+ int res, status, mask;
+
+ if (parse_strtoul(buf, 0xffff, &t))
+ return -EINVAL;
+
+ res = hotkey_get(&status, &mask);
+ if (!res)
+ hotkey_set(status, t);
+
+ return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_hotkey_mask =
+ __ATTR(mask, S_IWUSR | S_IRUGO,
+ hotkey_mask_show, hotkey_mask_store);
+
+/* sysfs hotkey bios_enabled ------------------------------------------- */
+static ssize_t hotkey_bios_enabled_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_orig_status);
+}
+
+static struct device_attribute dev_attr_hotkey_bios_enabled =
+ __ATTR(bios_enabled, S_IRUGO, hotkey_bios_enabled_show, NULL);
+
+/* sysfs hotkey bios_mask ---------------------------------------------- */
+static ssize_t hotkey_bios_mask_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", hotkey_orig_mask);
+}
+
+static struct device_attribute dev_attr_hotkey_bios_mask =
+ __ATTR(bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *hotkey_mask_attributes[] = {
+ &dev_attr_hotkey_mask.attr,
+ &dev_attr_hotkey_bios_enabled.attr,
+ &dev_attr_hotkey_bios_mask.attr,
+};
+
+static int __init hotkey_init(struct ibm_init_struct *iibm)
+{
+ int res;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(hkey);
+ mutex_init(&hotkey_mutex);
+
+ /* hotkey not supported on 570 */
+ tp_features.hotkey = hkey_handle != NULL;
+
+ vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n",
+ str_supported(tp_features.hotkey));
+
+ if (tp_features.hotkey) {
+ hotkey_dev_attributes = create_attr_set(4,
+ TPACPI_HOTKEY_SYSFS_GROUP);
+ if (!hotkey_dev_attributes)
+ return -ENOMEM;
+ res = add_to_attr_set(hotkey_dev_attributes,
+ &dev_attr_hotkey_enable.attr);
+ if (res)
+ return res;
+
+ /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+ A30, R30, R31, T20-22, X20-21, X22-24 */
+ tp_features.hotkey_mask =
+ acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
+
+ vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
+ str_supported(tp_features.hotkey_mask));
+
+ res = hotkey_get(&hotkey_orig_status, &hotkey_orig_mask);
+ if (!res && tp_features.hotkey_mask) {
+ res = add_many_to_attr_set(hotkey_dev_attributes,
+ hotkey_mask_attributes,
+ ARRAY_SIZE(hotkey_mask_attributes));
+ }
+ if (!res)
+ res = register_attr_set_with_sysfs(
+ hotkey_dev_attributes,
+ &tpacpi_pdev->dev.kobj);
+
+ if (res)
+ return res;
+ }
+
+ return (tp_features.hotkey)? 0 : 1;
+}
+
+static void hotkey_exit(void)
+{
+ int res;
+
+ if (tp_features.hotkey) {
+ dbg_printk(TPACPI_DBG_EXIT, "restoring original hotkey mask\n");
+ res = hotkey_set(hotkey_orig_status, hotkey_orig_mask);
+ if (res)
+ printk(IBM_ERR "failed to restore hotkey to BIOS defaults\n");
+ }
+
+ if (hotkey_dev_attributes) {
+ delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+ hotkey_dev_attributes = NULL;
+ }
+}
+
+static void hotkey_notify(struct ibm_struct *ibm, u32 event)
+{
+ int hkey;
+
+ if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
+ acpi_bus_generate_event(ibm->acpi->device, event, hkey);
+ else {
+ printk(IBM_ERR "unknown hotkey event %d\n", event);
+ acpi_bus_generate_event(ibm->acpi->device, event, 0);
+ }
+}
+
+/*
+ * Call with hotkey_mutex held
+ */
+static int hotkey_get(int *status, int *mask)
+{
+ if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
+ return -EIO;
+
+ if (tp_features.hotkey_mask)
+ if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Call with hotkey_mutex held
+ */
+static int hotkey_set(int status, int mask)
+{
+ int i;
+
+ if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
+ return -EIO;
+
+ if (tp_features.hotkey_mask)
+ for (i = 0; i < 32; i++) {
+ int bit = ((1 << i) & mask) != 0;
+ if (!acpi_evalf(hkey_handle,
+ NULL, "MHKM", "vdd", i + 1, bit))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int hotkey_read(char *p)
+{
+ int res, status, mask;
+ int len = 0;
+
+ if (!tp_features.hotkey) {
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ return len;
+ }
+
+ res = mutex_lock_interruptible(&hotkey_mutex);
+ if (res < 0)
+ return res;
+ res = hotkey_get(&status, &mask);
+ mutex_unlock(&hotkey_mutex);
+ if (res)
+ return res;
+
+ len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
+ if (tp_features.hotkey_mask) {
+ len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
+ len += sprintf(p + len,
+ "commands:\tenable, disable, reset, <mask>\n");
+ } else {
+ len += sprintf(p + len, "mask:\t\tnot supported\n");
+ len += sprintf(p + len, "commands:\tenable, disable, reset\n");
+ }
+
+ return len;
+}
+
+static int hotkey_write(char *buf)
+{
+ int res, status, mask;
+ char *cmd;
+ int do_cmd = 0;
+
+ if (!tp_features.hotkey)
+ return -ENODEV;
+
+ res = mutex_lock_interruptible(&hotkey_mutex);
+ if (res < 0)
+ return res;
+
+ res = hotkey_get(&status, &mask);
+ if (res)
+ goto errexit;
+
+ res = 0;
+ while ((cmd = next_cmd(&buf))) {
+ if (strlencmp(cmd, "enable") == 0) {
+ status = 1;
+ } else if (strlencmp(cmd, "disable") == 0) {
+ status = 0;
+ } else if (strlencmp(cmd, "reset") == 0) {
+ status = hotkey_orig_status;
+ mask = hotkey_orig_mask;
+ } else if (sscanf(cmd, "0x%x", &mask) == 1) {
+ /* mask set */
+ } else if (sscanf(cmd, "%x", &mask) == 1) {
+ /* mask set */
+ } else {
+ res = -EINVAL;
+ goto errexit;
+ }
+ do_cmd = 1;
+ }
+
+ if (do_cmd)
+ res = hotkey_set(status, mask);
+
+errexit:
+ mutex_unlock(&hotkey_mutex);
+ return res;
+}
+
+static struct tp_acpi_drv_struct ibm_hotkey_acpidriver = {
+ .hid = IBM_HKEY_HID,
+ .notify = hotkey_notify,
+ .handle = &hkey_handle,
+ .type = ACPI_DEVICE_NOTIFY,
+};
+
+static struct ibm_struct hotkey_driver_data = {
+ .name = "hotkey",
+ .read = hotkey_read,
+ .write = hotkey_write,
+ .exit = hotkey_exit,
+ .acpi = &ibm_hotkey_acpidriver,
+};
+
+/*************************************************************************
+ * Bluetooth subdriver
+ */
+
+/* sysfs bluetooth enable ---------------------------------------------- */
+static ssize_t bluetooth_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int status;
+
+ status = bluetooth_get_radiosw();
+ if (status < 0)
+ return status;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", status ? 1 : 0);
+}
+
+static ssize_t bluetooth_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+ int res;
+
+ if (parse_strtoul(buf, 1, &t))
+ return -EINVAL;
+
+ res = bluetooth_set_radiosw(t);
+
+ return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_bluetooth_enable =
+ __ATTR(enable, S_IWUSR | S_IRUGO,
+ bluetooth_enable_show, bluetooth_enable_store);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *bluetooth_attributes[] = {
+ &dev_attr_bluetooth_enable.attr,
+ NULL
+};
+
+static const struct attribute_group bluetooth_attr_group = {
+ .name = TPACPI_BLUETH_SYSFS_GROUP,
+ .attrs = bluetooth_attributes,
+};
+
+static int __init bluetooth_init(struct ibm_init_struct *iibm)
+{
+ int res;
+ int status = 0;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing bluetooth subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(hkey);
+
+ /* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+ G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
+ tp_features.bluetooth = hkey_handle &&
+ acpi_evalf(hkey_handle, &status, "GBDC", "qd");
+
+ vdbg_printk(TPACPI_DBG_INIT, "bluetooth is %s, status 0x%02x\n",
+ str_supported(tp_features.bluetooth),
+ status);
+
+ if (tp_features.bluetooth) {
+ if (!(status & TP_ACPI_BLUETOOTH_HWPRESENT)) {
+ /* no bluetooth hardware present in system */
+ tp_features.bluetooth = 0;
+ dbg_printk(TPACPI_DBG_INIT,
+ "bluetooth hardware not installed\n");
+ } else {
+ res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ &bluetooth_attr_group);
+ if (res)
+ return res;
+ }
+ }
+
+ return (tp_features.bluetooth)? 0 : 1;
+}
+
+static void bluetooth_exit(void)
+{
+ sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ &bluetooth_attr_group);
+}
+
+static int bluetooth_get_radiosw(void)
+{
+ int status;
+
+ if (!tp_features.bluetooth)
+ return -ENODEV;
+
+ if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
+ return -EIO;
+
+ return ((status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0);
+}
+
+static int bluetooth_set_radiosw(int radio_on)
+{
+ int status;
+
+ if (!tp_features.bluetooth)
+ return -ENODEV;
+
+ if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
+ return -EIO;
+ if (radio_on)
+ status |= TP_ACPI_BLUETOOTH_RADIOSSW;
+ else
+ status &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
+ if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
+ return -EIO;
+
+ return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int bluetooth_read(char *p)
+{
+ int len = 0;
+ int status = bluetooth_get_radiosw();
+
+ if (!tp_features.bluetooth)
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ else {
+ len += sprintf(p + len, "status:\t\t%s\n",
+ (status)? "enabled" : "disabled");
+ len += sprintf(p + len, "commands:\tenable, disable\n");
+ }
+
+ return len;
+}
+
+static int bluetooth_write(char *buf)
+{
+ char *cmd;
+
+ if (!tp_features.bluetooth)
+ return -ENODEV;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (strlencmp(cmd, "enable") == 0) {
+ bluetooth_set_radiosw(1);
+ } else if (strlencmp(cmd, "disable") == 0) {
+ bluetooth_set_radiosw(0);
+ } else
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct ibm_struct bluetooth_driver_data = {
+ .name = "bluetooth",
+ .read = bluetooth_read,
+ .write = bluetooth_write,
+ .exit = bluetooth_exit,
+};
+
+/*************************************************************************
+ * Wan subdriver
+ */
+
+/* sysfs wan enable ---------------------------------------------------- */
+static ssize_t wan_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int status;
+
+ status = wan_get_radiosw();
+ if (status < 0)
+ return status;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", status ? 1 : 0);
+}
+
+static ssize_t wan_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+ int res;
+
+ if (parse_strtoul(buf, 1, &t))
+ return -EINVAL;
+
+ res = wan_set_radiosw(t);
+
+ return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_wan_enable =
+ __ATTR(enable, S_IWUSR | S_IRUGO,
+ wan_enable_show, wan_enable_store);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *wan_attributes[] = {
+ &dev_attr_wan_enable.attr,
+ NULL
+};
+
+static const struct attribute_group wan_attr_group = {
+ .name = TPACPI_WAN_SYSFS_GROUP,
+ .attrs = wan_attributes,
+};
+
+static int __init wan_init(struct ibm_init_struct *iibm)
+{
+ int res;
+ int status = 0;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing wan subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(hkey);
+
+ tp_features.wan = hkey_handle &&
+ acpi_evalf(hkey_handle, &status, "GWAN", "qd");
+
+ vdbg_printk(TPACPI_DBG_INIT, "wan is %s, status 0x%02x\n",
+ str_supported(tp_features.wan),
+ status);
+
+ if (tp_features.wan) {
+ if (!(status & TP_ACPI_WANCARD_HWPRESENT)) {
+ /* no wan hardware present in system */
+ tp_features.wan = 0;
+ dbg_printk(TPACPI_DBG_INIT,
+ "wan hardware not installed\n");
+ } else {
+ res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ &wan_attr_group);
+ if (res)
+ return res;
+ }
+ }
+
+ return (tp_features.wan)? 0 : 1;
+}
+
+static void wan_exit(void)
+{
+ sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ &wan_attr_group);
+}
+
+static int wan_get_radiosw(void)
+{
+ int status;
+
+ if (!tp_features.wan)
+ return -ENODEV;
+
+ if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+ return -EIO;
+
+ return ((status & TP_ACPI_WANCARD_RADIOSSW) != 0);
+}
+
+static int wan_set_radiosw(int radio_on)
+{
+ int status;
+
+ if (!tp_features.wan)
+ return -ENODEV;
+
+ if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+ return -EIO;
+ if (radio_on)
+ status |= TP_ACPI_WANCARD_RADIOSSW;
+ else
+ status &= ~TP_ACPI_WANCARD_RADIOSSW;
+ if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
+ return -EIO;
+
+ return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int wan_read(char *p)
+{
+ int len = 0;
+ int status = wan_get_radiosw();
+
+ if (!tp_features.wan)
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ else {
+ len += sprintf(p + len, "status:\t\t%s\n",
+ (status)? "enabled" : "disabled");
+ len += sprintf(p + len, "commands:\tenable, disable\n");
+ }
+
+ return len;
+}
+
+static int wan_write(char *buf)
+{
+ char *cmd;
+
+ if (!tp_features.wan)
+ return -ENODEV;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (strlencmp(cmd, "enable") == 0) {
+ wan_set_radiosw(1);
+ } else if (strlencmp(cmd, "disable") == 0) {
+ wan_set_radiosw(0);
+ } else
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct ibm_struct wan_driver_data = {
+ .name = "wan",
+ .read = wan_read,
+ .write = wan_write,
+ .exit = wan_exit,
+ .flags.experimental = 1,
+};
+
+/*************************************************************************
+ * Video subdriver
+ */
+
+static enum video_access_mode video_supported;
+static int video_orig_autosw;
+
+IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */
+ "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */
+ "\\_SB.PCI0.VID0", /* 770e */
+ "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */
+ "\\_SB.PCI0.AGP.VID", /* all others */
+ ); /* R30, R31 */
+
+IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */
+
+static int __init video_init(struct ibm_init_struct *iibm)
+{
+ int ivga;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing video subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(vid);
+ IBM_ACPIHANDLE_INIT(vid2);
+
+ if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
+ /* G41, assume IVGA doesn't change */
+ vid_handle = vid2_handle;
+
+ if (!vid_handle)
+ /* video switching not supported on R30, R31 */
+ video_supported = TPACPI_VIDEO_NONE;
+ else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
+ /* 570 */
+ video_supported = TPACPI_VIDEO_570;
+ else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
+ /* 600e/x, 770e, 770x */
+ video_supported = TPACPI_VIDEO_770;
+ else
+ /* all others */
+ video_supported = TPACPI_VIDEO_NEW;
+
+ vdbg_printk(TPACPI_DBG_INIT, "video is %s, mode %d\n",
+ str_supported(video_supported != TPACPI_VIDEO_NONE),
+ video_supported);
+
+ return (video_supported != TPACPI_VIDEO_NONE)? 0 : 1;
+}
+
+static void video_exit(void)
+{
+ dbg_printk(TPACPI_DBG_EXIT,
+ "restoring original video autoswitch mode\n");
+ if (video_autosw_set(video_orig_autosw))
+ printk(IBM_ERR "error while trying to restore original "
+ "video autoswitch mode\n");
+}
+
+static int video_outputsw_get(void)
+{
+ int status = 0;
+ int i;
+
+ switch (video_supported) {
+ case TPACPI_VIDEO_570:
+ if (!acpi_evalf(NULL, &i, "\\_SB.PHS", "dd",
+ TP_ACPI_VIDEO_570_PHSCMD))
+ return -EIO;
+ status = i & TP_ACPI_VIDEO_570_PHSMASK;
+ break;
+ case TPACPI_VIDEO_770:
+ if (!acpi_evalf(NULL, &i, "\\VCDL", "d"))
+ return -EIO;
+ if (i)
+ status |= TP_ACPI_VIDEO_S_LCD;
+ if (!acpi_evalf(NULL, &i, "\\VCDC", "d"))
+ return -EIO;
+ if (i)
+ status |= TP_ACPI_VIDEO_S_CRT;
+ break;
+ case TPACPI_VIDEO_NEW:
+ if (!acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1) ||
+ !acpi_evalf(NULL, &i, "\\VCDC", "d"))
+ return -EIO;
+ if (i)
+ status |= TP_ACPI_VIDEO_S_CRT;
+
+ if (!acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0) ||
+ !acpi_evalf(NULL, &i, "\\VCDL", "d"))
+ return -EIO;
+ if (i)
+ status |= TP_ACPI_VIDEO_S_LCD;
+ if (!acpi_evalf(NULL, &i, "\\VCDD", "d"))
+ return -EIO;
+ if (i)
+ status |= TP_ACPI_VIDEO_S_DVI;
+ break;
+ default:
+ return -ENOSYS;
+ }
+
+ return status;
+}
+
+static int video_outputsw_set(int status)
+{
+ int autosw;
+ int res = 0;
+
+ switch (video_supported) {
+ case TPACPI_VIDEO_570:
+ res = acpi_evalf(NULL, NULL,
+ "\\_SB.PHS2", "vdd",
+ TP_ACPI_VIDEO_570_PHS2CMD,
+ status | TP_ACPI_VIDEO_570_PHS2SET);
+ break;
+ case TPACPI_VIDEO_770:
+ autosw = video_autosw_get();
+ if (autosw < 0)
+ return autosw;
+
+ res = video_autosw_set(1);
+ if (res)
+ return res;
+ res = acpi_evalf(vid_handle, NULL,
+ "ASWT", "vdd", status * 0x100, 0);
+ if (!autosw && video_autosw_set(autosw)) {
+ printk(IBM_ERR "video auto-switch left enabled due to error\n");
+ return -EIO;
+ }
+ break;
+ case TPACPI_VIDEO_NEW:
+ res = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
+ acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
+ break;
+ default:
+ return -ENOSYS;
+ }
+
+ return (res)? 0 : -EIO;
+}
+
+static int video_autosw_get(void)
+{
+ int autosw = 0;
+
+ switch (video_supported) {
+ case TPACPI_VIDEO_570:
+ if (!acpi_evalf(vid_handle, &autosw, "SWIT", "d"))
+ return -EIO;
+ break;
+ case TPACPI_VIDEO_770:
+ case TPACPI_VIDEO_NEW:
+ if (!acpi_evalf(vid_handle, &autosw, "^VDEE", "d"))
+ return -EIO;
+ break;
+ default:
+ return -ENOSYS;
+ }
+
+ return autosw & 1;
+}
+
+static int video_autosw_set(int enable)
+{
+ if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", (enable)? 1 : 0))
+ return -EIO;
+ return 0;
+}
+
+static int video_outputsw_cycle(void)
+{
+ int autosw = video_autosw_get();
+ int res;
+
+ if (autosw < 0)
+ return autosw;
+
+ switch (video_supported) {
+ case TPACPI_VIDEO_570:
+ res = video_autosw_set(1);
+ if (res)
+ return res;
+ res = acpi_evalf(ec_handle, NULL, "_Q16", "v");
+ break;
+ case TPACPI_VIDEO_770:
+ case TPACPI_VIDEO_NEW:
+ res = video_autosw_set(1);
+ if (res)
+ return res;
+ res = acpi_evalf(vid_handle, NULL, "VSWT", "v");
+ break;
+ default:
+ return -ENOSYS;
+ }
+ if (!autosw && video_autosw_set(autosw)) {
+ printk(IBM_ERR "video auto-switch left enabled due to error\n");
+ return -EIO;
+ }
+
+ return (res)? 0 : -EIO;
+}
+
+static int video_expand_toggle(void)
+{
+ switch (video_supported) {
+ case TPACPI_VIDEO_570:
+ return acpi_evalf(ec_handle, NULL, "_Q17", "v")?
+ 0 : -EIO;
+ case TPACPI_VIDEO_770:
+ return acpi_evalf(vid_handle, NULL, "VEXP", "v")?
+ 0 : -EIO;
+ case TPACPI_VIDEO_NEW:
+ return acpi_evalf(NULL, NULL, "\\VEXP", "v")?
+ 0 : -EIO;
+ default:
+ return -ENOSYS;
+ }
+ /* not reached */
+}
+
+static int video_read(char *p)
+{
+ int status, autosw;
+ int len = 0;
+
+ if (video_supported == TPACPI_VIDEO_NONE) {
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ return len;
+ }
+
+ status = video_outputsw_get();
+ if (status < 0)
+ return status;
+
+ autosw = video_autosw_get();
+ if (autosw < 0)
+ return autosw;
+
+ len += sprintf(p + len, "status:\t\tsupported\n");
+ len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
+ len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
+ if (video_supported == TPACPI_VIDEO_NEW)
+ len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
+ len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
+ len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
+ len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
+ if (video_supported == TPACPI_VIDEO_NEW)
+ len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
+ len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
+ len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
+
+ return len;
+}
+
+static int video_write(char *buf)
+{
+ char *cmd;
+ int enable, disable, status;
+ int res;
+
+ if (video_supported == TPACPI_VIDEO_NONE)
+ return -ENODEV;
+
+ enable = 0;
+ disable = 0;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (strlencmp(cmd, "lcd_enable") == 0) {
+ enable |= TP_ACPI_VIDEO_S_LCD;
+ } else if (strlencmp(cmd, "lcd_disable") == 0) {
+ disable |= TP_ACPI_VIDEO_S_LCD;
+ } else if (strlencmp(cmd, "crt_enable") == 0) {
+ enable |= TP_ACPI_VIDEO_S_CRT;
+ } else if (strlencmp(cmd, "crt_disable") == 0) {
+ disable |= TP_ACPI_VIDEO_S_CRT;
+ } else if (video_supported == TPACPI_VIDEO_NEW &&
+ strlencmp(cmd, "dvi_enable") == 0) {
+ enable |= TP_ACPI_VIDEO_S_DVI;
+ } else if (video_supported == TPACPI_VIDEO_NEW &&
+ strlencmp(cmd, "dvi_disable") == 0) {
+ disable |= TP_ACPI_VIDEO_S_DVI;
+ } else if (strlencmp(cmd, "auto_enable") == 0) {
+ res = video_autosw_set(1);
+ if (res)
+ return res;
+ } else if (strlencmp(cmd, "auto_disable") == 0) {
+ res = video_autosw_set(0);
+ if (res)
+ return res;
+ } else if (strlencmp(cmd, "video_switch") == 0) {
+ res = video_outputsw_cycle();
+ if (res)
+ return res;
+ } else if (strlencmp(cmd, "expand_toggle") == 0) {
+ res = video_expand_toggle();
+ if (res)
+ return res;
+ } else
+ return -EINVAL;
+ }
+
+ if (enable || disable) {
+ status = video_outputsw_get();
+ if (status < 0)
+ return status;
+ res = video_outputsw_set((status & ~disable) | enable);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+static struct ibm_struct video_driver_data = {
+ .name = "video",
+ .read = video_read,
+ .write = video_write,
+ .exit = video_exit,
+};
+
+/*************************************************************************
+ * Light (thinklight) subdriver
+ */
+
+IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */
+IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */
+
+static int __init light_init(struct ibm_init_struct *iibm)
+{
+ vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(ledb);
+ IBM_ACPIHANDLE_INIT(lght);
+ IBM_ACPIHANDLE_INIT(cmos);
+
+ /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
+ tp_features.light = (cmos_handle || lght_handle) && !ledb_handle;
+
+ if (tp_features.light)
+ /* light status not supported on
+ 570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
+ tp_features.light_status =
+ acpi_evalf(ec_handle, NULL, "KBLT", "qv");
+
+ vdbg_printk(TPACPI_DBG_INIT, "light is %s\n",
+ str_supported(tp_features.light));
+
+ return (tp_features.light)? 0 : 1;
+}
+
+static int light_read(char *p)
+{
+ int len = 0;
+ int status = 0;
+
+ if (!tp_features.light) {
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ } else if (!tp_features.light_status) {
+ len += sprintf(p + len, "status:\t\tunknown\n");
+ len += sprintf(p + len, "commands:\ton, off\n");
+ } else {
+ if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
+ return -EIO;
+ len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
+ len += sprintf(p + len, "commands:\ton, off\n");
+ }
+
+ return len;
+}
+
+static int light_write(char *buf)
+{
+ int cmos_cmd, lght_cmd;
+ char *cmd;
+ int success;
+
+ if (!tp_features.light)
+ return -ENODEV;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (strlencmp(cmd, "on") == 0) {
+ cmos_cmd = 0x0c;
+ lght_cmd = 1;
+ } else if (strlencmp(cmd, "off") == 0) {
+ cmos_cmd = 0x0d;
+ lght_cmd = 0;
+ } else
+ return -EINVAL;
+
+ success = cmos_handle ?
+ acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
+ acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
+ if (!success)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static struct ibm_struct light_driver_data = {
+ .name = "light",
+ .read = light_read,
+ .write = light_write,
+};
+
+/*************************************************************************
+ * Dock subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+
+IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
+ "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
+ "\\_SB.PCI0.PCI1.DOCK", /* all others */
+ "\\_SB.PCI.ISA.SLCE", /* 570 */
+ ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
+
+/* don't list other alternatives as we install a notify handler on the 570 */
+IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
+
+static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
+ {
+ .notify = dock_notify,
+ .handle = &dock_handle,
+ .type = ACPI_SYSTEM_NOTIFY,
+ },
+ {
+ .hid = IBM_PCI_HID,
+ .notify = dock_notify,
+ .handle = &pci_handle,
+ .type = ACPI_SYSTEM_NOTIFY,
+ },
+};
+
+static struct ibm_struct dock_driver_data[2] = {
+ {
+ .name = "dock",
+ .read = dock_read,
+ .write = dock_write,
+ .acpi = &ibm_dock_acpidriver[0],
+ },
+ {
+ .name = "dock",
+ .acpi = &ibm_dock_acpidriver[1],
+ },
+};
+
+#define dock_docked() (_sta(dock_handle) & 1)
+
+static int __init dock_init(struct ibm_init_struct *iibm)
+{
+ vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(dock);
+
+ vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
+ str_supported(dock_handle != NULL));
+
+ return (dock_handle)? 0 : 1;
+}
+
+static int __init dock_init2(struct ibm_init_struct *iibm)
+{
+ int dock2_needed;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
+
+ if (dock_driver_data[0].flags.acpi_driver_registered &&
+ dock_driver_data[0].flags.acpi_notify_installed) {
+ IBM_ACPIHANDLE_INIT(pci);
+ dock2_needed = (pci_handle != NULL);
+ vdbg_printk(TPACPI_DBG_INIT,
+ "dock PCI handler for the TP 570 is %s\n",
+ str_supported(dock2_needed));
+ } else {
+ vdbg_printk(TPACPI_DBG_INIT,
+ "dock subdriver part 2 not required\n");
+ dock2_needed = 0;
+ }
+
+ return (dock2_needed)? 0 : 1;
+}
+
+static void dock_notify(struct ibm_struct *ibm, u32 event)
+{
+ int docked = dock_docked();
+ int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, IBM_PCI_HID);
+
+ if (event == 1 && !pci) /* 570 */
+ acpi_bus_generate_event(ibm->acpi->device, event, 1); /* button */
+ else if (event == 1 && pci) /* 570 */
+ acpi_bus_generate_event(ibm->acpi->device, event, 3); /* dock */
+ else if (event == 3 && docked)
+ acpi_bus_generate_event(ibm->acpi->device, event, 1); /* button */
+ else if (event == 3 && !docked)
+ acpi_bus_generate_event(ibm->acpi->device, event, 2); /* undock */
+ else if (event == 0 && docked)
+ acpi_bus_generate_event(ibm->acpi->device, event, 3); /* dock */
+ else {
+ printk(IBM_ERR "unknown dock event %d, status %d\n",
+ event, _sta(dock_handle));
+ acpi_bus_generate_event(ibm->acpi->device, event, 0); /* unknown */
+ }
+}
+
+static int dock_read(char *p)
+{
+ int len = 0;
+ int docked = dock_docked();
+
+ if (!dock_handle)
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ else if (!docked)
+ len += sprintf(p + len, "status:\t\tundocked\n");
+ else {
+ len += sprintf(p + len, "status:\t\tdocked\n");
+ len += sprintf(p + len, "commands:\tdock, undock\n");
+ }
+
+ return len;
+}
+
+static int dock_write(char *buf)
+{
+ char *cmd;
+
+ if (!dock_docked())
+ return -ENODEV;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (strlencmp(cmd, "undock") == 0) {
+ if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
+ !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
+ return -EIO;
+ } else if (strlencmp(cmd, "dock") == 0) {
+ if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
+ return -EIO;
+ } else
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_THINKPAD_ACPI_DOCK */
+
+/*************************************************************************
+ * Bay subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
+ "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
+ "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
+ "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
+ ); /* A21e, R30, R31 */
+IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
+ "_EJ0", /* all others */
+ ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
+IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */
+ "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
+ ); /* all others */
+IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
+ "_EJ0", /* 770x */
+ ); /* all others */
+
+static int __init bay_init(struct ibm_init_struct *iibm)
+{
+ vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(bay);
+ if (bay_handle)
+ IBM_ACPIHANDLE_INIT(bay_ej);
+ IBM_ACPIHANDLE_INIT(bay2);
+ if (bay2_handle)
+ IBM_ACPIHANDLE_INIT(bay2_ej);
+
+ tp_features.bay_status = bay_handle &&
+ acpi_evalf(bay_handle, NULL, "_STA", "qv");
+ tp_features.bay_status2 = bay2_handle &&
+ acpi_evalf(bay2_handle, NULL, "_STA", "qv");
+
+ tp_features.bay_eject = bay_handle && bay_ej_handle &&
+ (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
+ tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
+ (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
+
+ vdbg_printk(TPACPI_DBG_INIT,
+ "bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
+ str_supported(tp_features.bay_status),
+ str_supported(tp_features.bay_eject),
+ str_supported(tp_features.bay_status2),
+ str_supported(tp_features.bay_eject2));
+
+ return (tp_features.bay_status || tp_features.bay_eject ||
+ tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
+}
+
+static void bay_notify(struct ibm_struct *ibm, u32 event)
+{
+ acpi_bus_generate_event(ibm->acpi->device, event, 0);
+}
+
+#define bay_occupied(b) (_sta(b##_handle) & 1)
+
+static int bay_read(char *p)
+{
+ int len = 0;
+ int occupied = bay_occupied(bay);
+ int occupied2 = bay_occupied(bay2);
+ int eject, eject2;
+
+ len += sprintf(p + len, "status:\t\t%s\n",
+ tp_features.bay_status ?
+ (occupied ? "occupied" : "unoccupied") :
+ "not supported");
+ if (tp_features.bay_status2)
+ len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
+ "occupied" : "unoccupied");
+
+ eject = tp_features.bay_eject && occupied;
+ eject2 = tp_features.bay_eject2 && occupied2;
+
+ if (eject && eject2)
+ len += sprintf(p + len, "commands:\teject, eject2\n");
+ else if (eject)
+ len += sprintf(p + len, "commands:\teject\n");
+ else if (eject2)
+ len += sprintf(p + len, "commands:\teject2\n");
+
+ return len;
+}
+
+static int bay_write(char *buf)
+{
+ char *cmd;
+
+ if (!tp_features.bay_eject && !tp_features.bay_eject2)
+ return -ENODEV;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
+ if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
+ return -EIO;
+ } else if (tp_features.bay_eject2 &&
+ strlencmp(cmd, "eject2") == 0) {
+ if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
+ return -EIO;
+ } else
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
+ .notify = bay_notify,
+ .handle = &bay_handle,
+ .type = ACPI_SYSTEM_NOTIFY,
+};
+
+static struct ibm_struct bay_driver_data = {
+ .name = "bay",
+ .read = bay_read,
+ .write = bay_write,
+ .acpi = &ibm_bay_acpidriver,
+};
+
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+
+/*************************************************************************
+ * CMOS subdriver
+ */
+
+/* sysfs cmos_command -------------------------------------------------- */
+static ssize_t cmos_command_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long cmos_cmd;
+ int res;
+
+ if (parse_strtoul(buf, 21, &cmos_cmd))
+ return -EINVAL;
+
+ res = issue_thinkpad_cmos_command(cmos_cmd);
+ return (res)? res : count;
+}
+
+static struct device_attribute dev_attr_cmos_command =
+ __ATTR(cmos_command, S_IWUSR, NULL, cmos_command_store);
+
+/* --------------------------------------------------------------------- */
+
+static int __init cmos_init(struct ibm_init_struct *iibm)
+{
+ int res;
+
+ vdbg_printk(TPACPI_DBG_INIT,
+ "initializing cmos commands subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(cmos);
+
+ vdbg_printk(TPACPI_DBG_INIT, "cmos commands are %s\n",
+ str_supported(cmos_handle != NULL));
+
+ res = device_create_file(&tpacpi_pdev->dev, &dev_attr_cmos_command);
+ if (res)
+ return res;
+
+ return (cmos_handle)? 0 : 1;
+}
+
+static void cmos_exit(void)
+{
+ device_remove_file(&tpacpi_pdev->dev, &dev_attr_cmos_command);
+}
+
+static int cmos_read(char *p)
+{
+ int len = 0;
+
+ /* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+ R30, R31, T20-22, X20-21 */
+ if (!cmos_handle)
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ else {
+ len += sprintf(p + len, "status:\t\tsupported\n");
+ len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
+ }
+
+ return len;
+}
+
+static int cmos_write(char *buf)
+{
+ char *cmd;
+ int cmos_cmd, res;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
+ cmos_cmd >= 0 && cmos_cmd <= 21) {
+ /* cmos_cmd set */
+ } else
+ return -EINVAL;
+
+ res = issue_thinkpad_cmos_command(cmos_cmd);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+static struct ibm_struct cmos_driver_data = {
+ .name = "cmos",
+ .read = cmos_read,
+ .write = cmos_write,
+ .exit = cmos_exit,
+};
+
+/*************************************************************************
+ * LED subdriver
+ */
+
+static enum led_access_mode led_supported;
+
+IBM_HANDLE(led, ec, "SLED", /* 570 */
+ "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+ "LED", /* all others */
+ ); /* R30, R31 */
+
+static int __init led_init(struct ibm_init_struct *iibm)
+{
+ vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(led);
+
+ if (!led_handle)
+ /* led not supported on R30, R31 */
+ led_supported = TPACPI_LED_NONE;
+ else if (strlencmp(led_path, "SLED") == 0)
+ /* 570 */
+ led_supported = TPACPI_LED_570;
+ else if (strlencmp(led_path, "SYSL") == 0)
+ /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+ led_supported = TPACPI_LED_OLD;
+ else
+ /* all others */
+ led_supported = TPACPI_LED_NEW;
+
+ vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
+ str_supported(led_supported), led_supported);
+
+ return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+}
+
+#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
+
+static int led_read(char *p)
+{
+ int len = 0;
+
+ if (!led_supported) {
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ return len;
+ }
+ len += sprintf(p + len, "status:\t\tsupported\n");
+
+ if (led_supported == TPACPI_LED_570) {
+ /* 570 */
+ int i, status;
+ for (i = 0; i < 8; i++) {
+ if (!acpi_evalf(ec_handle,
+ &status, "GLED", "dd", 1 << i))
+ return -EIO;
+ len += sprintf(p + len, "%d:\t\t%s\n",
+ i, led_status(status));
+ }
+ }
+
+ len += sprintf(p + len, "commands:\t"
+ "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+
+ return len;
+}
+
+/* off, on, blink */
+static const int led_sled_arg1[] = { 0, 1, 3 };
+static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
+static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
+static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
+
+static int led_write(char *buf)
+{
+ char *cmd;
+ int led, ind, ret;
+
+ if (!led_supported)
+ return -ENODEV;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+ return -EINVAL;
+
+ if (strstr(cmd, "off")) {
+ ind = 0;
+ } else if (strstr(cmd, "on")) {
+ ind = 1;
+ } else if (strstr(cmd, "blink")) {
+ ind = 2;
+ } else
+ return -EINVAL;
+
+ if (led_supported == TPACPI_LED_570) {
+ /* 570 */
+ led = 1 << led;
+ if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+ led, led_sled_arg1[ind]))
+ return -EIO;
+ } else if (led_supported == TPACPI_LED_OLD) {
+ /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
+ led = 1 << led;
+ ret = ec_write(TPACPI_LED_EC_HLMS, led);
+ if (ret >= 0)
+ ret =
+ ec_write(TPACPI_LED_EC_HLBL,
+ led * led_exp_hlbl[ind]);
+ if (ret >= 0)
+ ret =
+ ec_write(TPACPI_LED_EC_HLCL,
+ led * led_exp_hlcl[ind]);
+ if (ret < 0)
+ return ret;
+ } else {
+ /* all others */
+ if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+ led, led_led_arg1[ind]))
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+static struct ibm_struct led_driver_data = {
+ .name = "led",
+ .read = led_read,
+ .write = led_write,
+};
+
+/*************************************************************************
+ * Beep subdriver
+ */
+
+IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
+
+static int __init beep_init(struct ibm_init_struct *iibm)
+{
+ vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
+
+ IBM_ACPIHANDLE_INIT(beep);
+
+ vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
+ str_supported(beep_handle != NULL));
+
+ return (beep_handle)? 0 : 1;
+}
+
+static int beep_read(char *p)
+{
+ int len = 0;
+
+ if (!beep_handle)
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ else {
+ len += sprintf(p + len, "status:\t\tsupported\n");
+ len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
+ }
+
+ return len;
+}
+
+static int beep_write(char *buf)
+{
+ char *cmd;
+ int beep_cmd;
+
+ if (!beep_handle)
+ return -ENODEV;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
+ beep_cmd >= 0 && beep_cmd <= 17) {
+ /* beep_cmd set */
+ } else
+ return -EINVAL;
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static struct ibm_struct beep_driver_data = {
+ .name = "beep",
+ .read = beep_read,
+ .write = beep_write,
+};
+
+/*************************************************************************
+ * Thermal subdriver
+ */
+
+static enum thermal_access_mode thermal_read_mode;
+
+/* sysfs temp##_input -------------------------------------------------- */
+
+static ssize_t thermal_temp_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr =
+ to_sensor_dev_attr(attr);
+ int idx = sensor_attr->index;
+ s32 value;
+ int res;
+
+ res = thermal_get_sensor(idx, &value);
+ if (res)
+ return res;
+ if (value == TP_EC_THERMAL_TMP_NA * 1000)
+ return -ENXIO;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+#define THERMAL_SENSOR_ATTR_TEMP(_idxA, _idxB) \
+ SENSOR_ATTR(temp##_idxA##_input, S_IRUGO, thermal_temp_input_show, NULL, _idxB)
+
+static struct sensor_device_attribute sensor_dev_attr_thermal_temp_input[] = {
+ THERMAL_SENSOR_ATTR_TEMP(1, 0),
+ THERMAL_SENSOR_ATTR_TEMP(2, 1),
+ THERMAL_SENSOR_ATTR_TEMP(3, 2),
+ THERMAL_SENSOR_ATTR_TEMP(4, 3),
+ THERMAL_SENSOR_ATTR_TEMP(5, 4),
+ THERMAL_SENSOR_ATTR_TEMP(6, 5),
+ THERMAL_SENSOR_ATTR_TEMP(7, 6),
+ THERMAL_SENSOR_ATTR_TEMP(8, 7),
+ THERMAL_SENSOR_ATTR_TEMP(9, 8),
+ THERMAL_SENSOR_ATTR_TEMP(10, 9),
+ THERMAL_SENSOR_ATTR_TEMP(11, 10),
+ THERMAL_SENSOR_ATTR_TEMP(12, 11),
+ THERMAL_SENSOR_ATTR_TEMP(13, 12),
+ THERMAL_SENSOR_ATTR_TEMP(14, 13),
+ THERMAL_SENSOR_ATTR_TEMP(15, 14),
+ THERMAL_SENSOR_ATTR_TEMP(16, 15),
+};
+
+#define THERMAL_ATTRS(X) \
+ &sensor_dev_attr_thermal_temp_input[X].dev_attr.attr
+
+static struct attribute *thermal_temp_input_attr[] = {
+ THERMAL_ATTRS(8),
+ THERMAL_ATTRS(9),
+ THERMAL_ATTRS(10),
+ THERMAL_ATTRS(11),
+ THERMAL_ATTRS(12),
+ THERMAL_ATTRS(13),
+ THERMAL_ATTRS(14),
+ THERMAL_ATTRS(15),
+ THERMAL_ATTRS(0),
+ THERMAL_ATTRS(1),
+ THERMAL_ATTRS(2),
+ THERMAL_ATTRS(3),
+ THERMAL_ATTRS(4),
+ THERMAL_ATTRS(5),
+ THERMAL_ATTRS(6),
+ THERMAL_ATTRS(7),
+ NULL
+};
+
+static const struct attribute_group thermal_temp_input16_group = {
+ .attrs = thermal_temp_input_attr
+};
+
+static const struct attribute_group thermal_temp_input8_group = {
+ .attrs = &thermal_temp_input_attr[8]
+};
+
+#undef THERMAL_SENSOR_ATTR_TEMP
+#undef THERMAL_ATTRS
+
+/* --------------------------------------------------------------------- */
+
+static int __init thermal_init(struct ibm_init_struct *iibm)
+{
+ u8 t, ta1, ta2;
+ int i;
+ int acpi_tmp7;
+ int res;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing thermal subdriver\n");
+
+ acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
+
+ if (ibm_thinkpad_ec_found && experimental) {
+ /*
+ * Direct EC access mode: sensors at registers
+ * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
+ * non-implemented, thermal sensors return 0x80 when
+ * not available
+ */
+
+ ta1 = ta2 = 0;
+ for (i = 0; i < 8; i++) {
+ if (acpi_ec_read(TP_EC_THERMAL_TMP0 + i, &t)) {
+ ta1 |= t;
+ } else {
+ ta1 = 0;
+ break;
+ }
+ if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
+ ta2 |= t;
+ } else {
+ ta1 = 0;
+ break;
+ }
+ }
+ if (ta1 == 0) {
+ /* This is sheer paranoia, but we handle it anyway */
+ if (acpi_tmp7) {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "falling back to ACPI TMPx access mode\n");
+ thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
+ } else {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "disabling thermal sensors access\n");
+ thermal_read_mode = TPACPI_THERMAL_NONE;
+ }
+ } else {
+ thermal_read_mode =
+ (ta2 != 0) ?
+ TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
+ }
+ } else if (acpi_tmp7) {
+ if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
+ /* 600e/x, 770e, 770x */
+ thermal_read_mode = TPACPI_THERMAL_ACPI_UPDT;
+ } else {
+ /* Standard ACPI TMPx access, max 8 sensors */
+ thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
+ }
+ } else {
+ /* temperatures not supported on 570, G4x, R30, R31, R32 */
+ thermal_read_mode = TPACPI_THERMAL_NONE;
+ }
+
+ vdbg_printk(TPACPI_DBG_INIT, "thermal is %s, mode %d\n",
+ str_supported(thermal_read_mode != TPACPI_THERMAL_NONE),
+ thermal_read_mode);
+
+ switch(thermal_read_mode) {
+ case TPACPI_THERMAL_TPEC_16:
+ res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ &thermal_temp_input16_group);
+ if (res)
+ return res;
+ break;
+ case TPACPI_THERMAL_TPEC_8:
+ case TPACPI_THERMAL_ACPI_TMP07:
+ case TPACPI_THERMAL_ACPI_UPDT:
+ res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ &thermal_temp_input8_group);
+ if (res)
+ return res;
+ break;
+ case TPACPI_THERMAL_NONE:
+ default:
+ return 1;
+ }
+
+ return 0;
+}
+
+static void thermal_exit(void)
+{
+ switch(thermal_read_mode) {
+ case TPACPI_THERMAL_TPEC_16:
+ sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ &thermal_temp_input16_group);
+ break;
+ case TPACPI_THERMAL_TPEC_8:
+ case TPACPI_THERMAL_ACPI_TMP07:
+ case TPACPI_THERMAL_ACPI_UPDT:
+ sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ &thermal_temp_input16_group);
+ break;
+ case TPACPI_THERMAL_NONE:
+ default:
+ break;
+ }
+}
+
+/* idx is zero-based */
+static int thermal_get_sensor(int idx, s32 *value)
+{
+ int t;
+ s8 tmp;
+ char tmpi[5];
+
+ t = TP_EC_THERMAL_TMP0;
+
+ switch (thermal_read_mode) {
+#if TPACPI_MAX_THERMAL_SENSORS >= 16
+ case TPACPI_THERMAL_TPEC_16:
+ if (idx >= 8 && idx <= 15) {
+ t = TP_EC_THERMAL_TMP8;
+ idx -= 8;
+ }
+ /* fallthrough */
+#endif
+ case TPACPI_THERMAL_TPEC_8:
+ if (idx <= 7) {
+ if (!acpi_ec_read(t + idx, &tmp))
+ return -EIO;
+ *value = tmp * 1000;
+ return 0;
+ }
+ break;
+
+ case TPACPI_THERMAL_ACPI_UPDT:
+ if (idx <= 7) {
+ snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
+ if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
+ return -EIO;
+ if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
+ return -EIO;
+ *value = (t - 2732) * 100;
+ return 0;
+ }
+ break;
+
+ case TPACPI_THERMAL_ACPI_TMP07:
+ if (idx <= 7) {
+ snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
+ if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
+ return -EIO;
+ *value = t * 1000;
+ return 0;
+ }
+ break;
+
+ case TPACPI_THERMAL_NONE:
+ default:
+ return -ENOSYS;
+ }
+
+ return -EINVAL;
+}
+
+static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
+{
+ int res, i;
+ int n;
+
+ n = 8;
+ i = 0;
+
+ if (!s)
+ return -EINVAL;
+
+ if (thermal_read_mode == TPACPI_THERMAL_TPEC_16)
+ n = 16;
+
+ for(i = 0 ; i < n; i++) {
+ res = thermal_get_sensor(i, &s->temp[i]);
+ if (res)
+ return res;
+ }
+
+ return n;
+}
+
+static int thermal_read(char *p)
+{
+ int len = 0;
+ int n, i;
+ struct ibm_thermal_sensors_struct t;
+
+ n = thermal_get_sensors(&t);
+ if (unlikely(n < 0))
+ return n;
+
+ len += sprintf(p + len, "temperatures:\t");
+
+ if (n > 0) {
+ for (i = 0; i < (n - 1); i++)
+ len += sprintf(p + len, "%d ", t.temp[i] / 1000);
+ len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
+ } else
+ len += sprintf(p + len, "not supported\n");
+
+ return len;
+}
+
+static struct ibm_struct thermal_driver_data = {
+ .name = "thermal",
+ .read = thermal_read,
+ .exit = thermal_exit,
+};
+
+/*************************************************************************
+ * EC Dump subdriver
+ */
+
+static u8 ecdump_regs[256];
+
+static int ecdump_read(char *p)
+{
+ int len = 0;
+ int i, j;
+ u8 v;
+
+ len += sprintf(p + len, "EC "
+ " +00 +01 +02 +03 +04 +05 +06 +07"
+ " +08 +09 +0a +0b +0c +0d +0e +0f\n");
+ for (i = 0; i < 256; i += 16) {
+ len += sprintf(p + len, "EC 0x%02x:", i);
+ for (j = 0; j < 16; j++) {
+ if (!acpi_ec_read(i + j, &v))
+ break;
+ if (v != ecdump_regs[i + j])
+ len += sprintf(p + len, " *%02x", v);
+ else
+ len += sprintf(p + len, " %02x", v);
+ ecdump_regs[i + j] = v;
+ }
+ len += sprintf(p + len, "\n");
+ if (j != 16)
+ break;
+ }
+
+ /* These are way too dangerous to advertise openly... */
+#if 0
+ len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
+ " (<offset> is 00-ff, <value> is 00-ff)\n");
+ len += sprintf(p + len, "commands:\t0x<offset> <value> "
+ " (<offset> is 00-ff, <value> is 0-255)\n");
+#endif
+ return len;
+}
+
+static int ecdump_write(char *buf)
+{
+ char *cmd;
+ int i, v;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
+ /* i and v set */
+ } else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
+ /* i and v set */
+ } else
+ return -EINVAL;
+ if (i >= 0 && i < 256 && v >= 0 && v < 256) {
+ if (!acpi_ec_write(i, v))
+ return -EIO;
+ } else
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct ibm_struct ecdump_driver_data = {
+ .name = "ecdump",
+ .read = ecdump_read,
+ .write = ecdump_write,
+ .flags.experimental = 1,
+};
+
+/*************************************************************************
+ * Backlight/brightness subdriver
+ */
+
+static struct backlight_device *ibm_backlight_device = NULL;
+
+static struct backlight_ops ibm_backlight_data = {
+ .get_brightness = brightness_get,
+ .update_status = brightness_update_status,
+};
+
+static int __init brightness_init(struct ibm_init_struct *iibm)
+{
+ int b;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
+
+ b = brightness_get(NULL);
+ if (b < 0)
+ return b;
+
+ ibm_backlight_device = backlight_device_register(
+ TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
+ &ibm_backlight_data);
+ if (IS_ERR(ibm_backlight_device)) {
+ printk(IBM_ERR "Could not register backlight device\n");
+ return PTR_ERR(ibm_backlight_device);
+ }
+ vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n");
+
+ ibm_backlight_device->props.max_brightness = 7;
+ ibm_backlight_device->props.brightness = b;
+ backlight_update_status(ibm_backlight_device);
+
+ return 0;
+}
+
+static void brightness_exit(void)
+{
+ if (ibm_backlight_device) {
+ vdbg_printk(TPACPI_DBG_EXIT,
+ "calling backlight_device_unregister()\n");
+ backlight_device_unregister(ibm_backlight_device);
+ ibm_backlight_device = NULL;
+ }
+}
+
+static int brightness_update_status(struct backlight_device *bd)
+{
+ return brightness_set(
+ (bd->props.fb_blank == FB_BLANK_UNBLANK &&
+ bd->props.power == FB_BLANK_UNBLANK) ?
+ bd->props.brightness : 0);
+}
+
+static int brightness_get(struct backlight_device *bd)
+{
+ u8 level;
+ if (!acpi_ec_read(brightness_offset, &level))
+ return -EIO;
+
+ level &= 0x7;
+
+ return level;
+}
+
+static int brightness_set(int value)
+{
+ int cmos_cmd, inc, i;
+ int current_value = brightness_get(NULL);
+
+ value &= 7;
+
+ cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN;
+ inc = value > current_value ? 1 : -1;
+ for (i = current_value; i != value; i += inc) {
+ if (issue_thinkpad_cmos_command(cmos_cmd))
+ return -EIO;
+ if (!acpi_ec_write(brightness_offset, i + inc))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int brightness_read(char *p)
+{
+ int len = 0;
+ int level;
+
+ if ((level = brightness_get(NULL)) < 0) {
+ len += sprintf(p + len, "level:\t\tunreadable\n");
+ } else {
+ len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
+ len += sprintf(p + len, "commands:\tup, down\n");
+ len += sprintf(p + len, "commands:\tlevel <level>"
+ " (<level> is 0-7)\n");
+ }
+
+ return len;
+}
+
+static int brightness_write(char *buf)
+{
+ int level;
+ int new_level;
+ char *cmd;
+
+ while ((cmd = next_cmd(&buf))) {
+ if ((level = brightness_get(NULL)) < 0)
+ return level;
+ level &= 7;
+
+ if (strlencmp(cmd, "up") == 0) {
+ new_level = level == 7 ? 7 : level + 1;
+ } else if (strlencmp(cmd, "down") == 0) {
+ new_level = level == 0 ? 0 : level - 1;
+ } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
+ new_level >= 0 && new_level <= 7) {
+ /* new_level set */
+ } else
+ return -EINVAL;
+
+ brightness_set(new_level);
+ }
+
+ return 0;
+}
+
+static struct ibm_struct brightness_driver_data = {
+ .name = "brightness",
+ .read = brightness_read,
+ .write = brightness_write,
+ .exit = brightness_exit,
+};
+
+/*************************************************************************
+ * Volume subdriver
+ */
+
+static int volume_read(char *p)
+{
+ int len = 0;
+ u8 level;
+
+ if (!acpi_ec_read(volume_offset, &level)) {
+ len += sprintf(p + len, "level:\t\tunreadable\n");
+ } else {
+ len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
+ len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
+ len += sprintf(p + len, "commands:\tup, down, mute\n");
+ len += sprintf(p + len, "commands:\tlevel <level>"
+ " (<level> is 0-15)\n");
+ }
+
+ return len;
+}
+
+static int volume_write(char *buf)
+{
+ int cmos_cmd, inc, i;
+ u8 level, mute;
+ int new_level, new_mute;
+ char *cmd;
+
+ while ((cmd = next_cmd(&buf))) {
+ if (!acpi_ec_read(volume_offset, &level))
+ return -EIO;
+ new_mute = mute = level & 0x40;
+ new_level = level = level & 0xf;
+
+ if (strlencmp(cmd, "up") == 0) {
+ if (mute)
+ new_mute = 0;
+ else
+ new_level = level == 15 ? 15 : level + 1;
+ } else if (strlencmp(cmd, "down") == 0) {
+ if (mute)
+ new_mute = 0;
+ else
+ new_level = level == 0 ? 0 : level - 1;
+ } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
+ new_level >= 0 && new_level <= 15) {
+ /* new_level set */
+ } else if (strlencmp(cmd, "mute") == 0) {
+ new_mute = 0x40;
+ } else
+ return -EINVAL;
+
+ if (new_level != level) { /* mute doesn't change */
+ cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN;
+ inc = new_level > level ? 1 : -1;
+
+ if (mute && (issue_thinkpad_cmos_command(cmos_cmd) ||
+ !acpi_ec_write(volume_offset, level)))
+ return -EIO;
+
+ for (i = level; i != new_level; i += inc)
+ if (issue_thinkpad_cmos_command(cmos_cmd) ||
+ !acpi_ec_write(volume_offset, i + inc))
+ return -EIO;
+
+ if (mute && (issue_thinkpad_cmos_command(TP_CMOS_VOLUME_MUTE) ||
+ !acpi_ec_write(volume_offset,
+ new_level + mute)))
+ return -EIO;
+ }
+
+ if (new_mute != mute) { /* level doesn't change */
+ cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP;
+
+ if (issue_thinkpad_cmos_command(cmos_cmd) ||
+ !acpi_ec_write(volume_offset, level + new_mute))
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+static struct ibm_struct volume_driver_data = {
+ .name = "volume",
+ .read = volume_read,
+ .write = volume_write,
+};
+
+/*************************************************************************
+ * Fan subdriver
+ */
+
+/*
+ * FAN ACCESS MODES
+ *
+ * TPACPI_FAN_RD_ACPI_GFAN:
+ * ACPI GFAN method: returns fan level
+ *
+ * see TPACPI_FAN_WR_ACPI_SFAN
+ * EC 0x2f (HFSP) not available if GFAN exists
+ *
+ * TPACPI_FAN_WR_ACPI_SFAN:
+ * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
+ *
+ * EC 0x2f (HFSP) might be available *for reading*, but do not use
+ * it for writing.
+ *
+ * TPACPI_FAN_WR_TPEC:
+ * ThinkPad EC register 0x2f (HFSP): fan control loop mode
+ * Supported on almost all ThinkPads
+ *
+ * Fan speed changes of any sort (including those caused by the
+ * disengaged mode) are usually done slowly by the firmware as the
+ * maximum ammount of fan duty cycle change per second seems to be
+ * limited.
+ *
+ * Reading is not available if GFAN exists.
+ * Writing is not available if SFAN exists.
+ *
+ * Bits
+ * 7 automatic mode engaged;
+ * (default operation mode of the ThinkPad)
+ * fan level is ignored in this mode.
+ * 6 full speed mode (takes precedence over bit 7);
+ * not available on all thinkpads. May disable
+ * the tachometer while the fan controller ramps up
+ * the speed (which can take up to a few *minutes*).
+ * Speeds up fan to 100% duty-cycle, which is far above
+ * the standard RPM levels. It is not impossible that
+ * it could cause hardware damage.
+ * 5-3 unused in some models. Extra bits for fan level
+ * in others, but still useless as all values above
+ * 7 map to the same speed as level 7 in these models.
+ * 2-0 fan level (0..7 usually)
+ * 0x00 = stop
+ * 0x07 = max (set when temperatures critical)
+ * Some ThinkPads may have other levels, see
+ * TPACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
+ *
+ * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
+ * boot. Apparently the EC does not intialize it, so unless ACPI DSDT
+ * does so, its initial value is meaningless (0x07).
+ *
+ * For firmware bugs, refer to:
+ * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * ----
+ *
+ * ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
+ * Main fan tachometer reading (in RPM)
+ *
+ * This register is present on all ThinkPads with a new-style EC, and
+ * it is known not to be present on the A21m/e, and T22, as there is
+ * something else in offset 0x84 according to the ACPI DSDT. Other
+ * ThinkPads from this same time period (and earlier) probably lack the
+ * tachometer as well.
+ *
+ * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
+ * was never fixed by IBM to report the EC firmware version string
+ * probably support the tachometer (like the early X models), so
+ * detecting it is quite hard. We need more data to know for sure.
+ *
+ * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
+ * might result.
+ *
+ * FIRMWARE BUG: may go stale while the EC is switching to full speed
+ * mode.
+ *
+ * For firmware bugs, refer to:
+ * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * TPACPI_FAN_WR_ACPI_FANS:
+ * ThinkPad X31, X40, X41. Not available in the X60.
+ *
+ * FANS ACPI handle: takes three arguments: low speed, medium speed,
+ * high speed. ACPI DSDT seems to map these three speeds to levels
+ * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
+ * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
+ *
+ * The speeds are stored on handles
+ * (FANA:FAN9), (FANC:FANB), (FANE:FAND).
+ *
+ * There are three default speed sets, acessible as handles:
+ * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
+ *
+ * ACPI DSDT switches which set is in use depending on various
+ * factors.
+ *
+ * TPACPI_FAN_WR_TPEC is also available and should be used to
+ * command the fan. The X31/X40/X41 seems to have 8 fan levels,
+ * but the ACPI tables just mention level 7.
+ */
+
+static enum fan_status_access_mode fan_status_access_mode;
+static enum fan_control_access_mode fan_control_access_mode;
+static enum fan_control_commands fan_control_commands;
+
+static u8 fan_control_initial_status;
+static u8 fan_control_desired_level;
+
+static void fan_watchdog_fire(struct work_struct *ignored);
+static int fan_watchdog_maxinterval;
+static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
+
+IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */
+IBM_HANDLE(gfan, ec, "GFAN", /* 570 */
+ "\\FSPD", /* 600e/x, 770e, 770x */
+ ); /* all others */
+IBM_HANDLE(sfan, ec, "SFAN", /* 570 */
+ "JFNS", /* 770x-JL */
+ ); /* all others */
+
+/*
+ * SYSFS fan layout: hwmon compatible (device)
+ *
+ * pwm*_enable:
+ * 0: "disengaged" mode
+ * 1: manual mode
+ * 2: native EC "auto" mode (recommended, hardware default)
+ *
+ * pwm*: set speed in manual mode, ignored otherwise.
+ * 0 is level 0; 255 is level 7. Intermediate points done with linear
+ * interpolation.
+ *
+ * fan*_input: tachometer reading, RPM
+ *
+ *
+ * SYSFS fan layout: extensions
+ *
+ * fan_watchdog (driver):
+ * fan watchdog interval in seconds, 0 disables (default), max 120
+ */
+
+/* sysfs fan pwm1_enable ----------------------------------------------- */
+static ssize_t fan_pwm1_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res, mode;
+ u8 status;
+
+ res = fan_get_status_safe(&status);
+ if (res)
+ return res;
+
+ if (unlikely(tp_features.fan_ctrl_status_undef)) {
+ if (status != fan_control_initial_status) {
+ tp_features.fan_ctrl_status_undef = 0;
+ } else {
+ /* Return most likely status. In fact, it
+ * might be the only possible status */
+ status = TP_EC_FAN_AUTO;
+ }
+ }
+
+ if (status & TP_EC_FAN_FULLSPEED) {
+ mode = 0;
+ } else if (status & TP_EC_FAN_AUTO) {
+ mode = 2;
+ } else
+ mode = 1;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", mode);
+}
+
+static ssize_t fan_pwm1_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+ int res, level;
+
+ if (parse_strtoul(buf, 2, &t))
+ return -EINVAL;
+
+ switch (t) {
+ case 0:
+ level = TP_EC_FAN_FULLSPEED;
+ break;
+ case 1:
+ level = TPACPI_FAN_LAST_LEVEL;
+ break;
+ case 2:
+ level = TP_EC_FAN_AUTO;
+ break;
+ case 3:
+ /* reserved for software-controlled auto mode */
+ return -ENOSYS;
+ default:
+ return -EINVAL;
+ }
+
+ res = fan_set_level_safe(level);
+ if (res == -ENXIO)
+ return -EINVAL;
+ else if (res < 0)
+ return res;
+
+ fan_watchdog_reset();
+
+ return count;
+}
+
+static struct device_attribute dev_attr_fan_pwm1_enable =
+ __ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+ fan_pwm1_enable_show, fan_pwm1_enable_store);
+
+/* sysfs fan pwm1 ------------------------------------------------------ */
+static ssize_t fan_pwm1_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res;
+ u8 status;
+
+ res = fan_get_status_safe(&status);
+ if (res)
+ return res;
+
+ if (unlikely(tp_features.fan_ctrl_status_undef)) {
+ if (status != fan_control_initial_status) {
+ tp_features.fan_ctrl_status_undef = 0;
+ } else {
+ status = TP_EC_FAN_AUTO;
+ }
+ }
+
+ if ((status &
+ (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) != 0)
+ status = fan_control_desired_level;
+
+ if (status > 7)
+ status = 7;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", (status * 255) / 7);
+}
+
+static ssize_t fan_pwm1_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long s;
+ int rc;
+ u8 status, newlevel;
+
+ if (parse_strtoul(buf, 255, &s))
+ return -EINVAL;
+
+ /* scale down from 0-255 to 0-7 */
+ newlevel = (s >> 5) & 0x07;
+
+ rc = mutex_lock_interruptible(&fan_mutex);
+ if (rc < 0)
+ return rc;
+
+ rc = fan_get_status(&status);
+ if (!rc && (status &
+ (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) == 0) {
+ rc = fan_set_level(newlevel);
+ if (rc == -ENXIO)
+ rc = -EINVAL;
+ else if (!rc) {
+ fan_update_desired_level(newlevel);
+ fan_watchdog_reset();
+ }
+ }
+
+ mutex_unlock(&fan_mutex);
+ return (rc)? rc : count;
+}
+
+static struct device_attribute dev_attr_fan_pwm1 =
+ __ATTR(pwm1, S_IWUSR | S_IRUGO,
+ fan_pwm1_show, fan_pwm1_store);
+
+/* sysfs fan fan1_input ------------------------------------------------ */
+static ssize_t fan_fan1_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res;
+ unsigned int speed;
+
+ res = fan_get_speed(&speed);
+ if (res < 0)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan1_input =
+ __ATTR(fan1_input, S_IRUGO,
+ fan_fan1_input_show, NULL);
+
+/* sysfs fan fan_watchdog (driver) ------------------------------------- */
+static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%u\n", fan_watchdog_maxinterval);
+}
+
+static ssize_t fan_fan_watchdog_store(struct device_driver *drv,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+
+ if (parse_strtoul(buf, 120, &t))
+ return -EINVAL;
+
+ if (!fan_control_allowed)
+ return -EPERM;
+
+ fan_watchdog_maxinterval = t;
+ fan_watchdog_reset();
+
+ return count;
+}
+
+static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO,
+ fan_fan_watchdog_show, fan_fan_watchdog_store);
+
+/* --------------------------------------------------------------------- */
+static struct attribute *fan_attributes[] = {
+ &dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
+ &dev_attr_fan_fan1_input.attr,
+ NULL
+};
+
+static const struct attribute_group fan_attr_group = {
+ .attrs = fan_attributes,
+};
+
+static int __init fan_init(struct ibm_init_struct *iibm)
+{
+ int rc;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing fan subdriver\n");
+
+ mutex_init(&fan_mutex);
+ fan_status_access_mode = TPACPI_FAN_NONE;
+ fan_control_access_mode = TPACPI_FAN_WR_NONE;
+ fan_control_commands = 0;
+ fan_watchdog_maxinterval = 0;
+ tp_features.fan_ctrl_status_undef = 0;
+ fan_control_desired_level = 7;
+
+ IBM_ACPIHANDLE_INIT(fans);
+ IBM_ACPIHANDLE_INIT(gfan);
+ IBM_ACPIHANDLE_INIT(sfan);
+
+ if (gfan_handle) {
+ /* 570, 600e/x, 770e, 770x */
+ fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
+ } else {
+ /* all other ThinkPads: note that even old-style
+ * ThinkPad ECs supports the fan control register */
+ if (likely(acpi_ec_read(fan_status_offset,
+ &fan_control_initial_status))) {
+ fan_status_access_mode = TPACPI_FAN_RD_TPEC;
+
+ /* In some ThinkPads, neither the EC nor the ACPI
+ * DSDT initialize the fan status, and it ends up
+ * being set to 0x07 when it *could* be either
+ * 0x07 or 0x80.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e),
+ * TP-76 (R52), TP-70 (T43, R52), which are known
+ * to be buggy. */
+ if (fan_control_initial_status == 0x07 &&
+ ibm_thinkpad_ec_found &&
+ ((ibm_thinkpad_ec_found[0] == '1' &&
+ ibm_thinkpad_ec_found[1] == 'Y') ||
+ (ibm_thinkpad_ec_found[0] == '7' &&
+ (ibm_thinkpad_ec_found[1] == '6' ||
+ ibm_thinkpad_ec_found[1] == '8' ||
+ ibm_thinkpad_ec_found[1] == '0'))
+ )) {
+ printk(IBM_NOTICE
+ "fan_init: initial fan status is "
+ "unknown, assuming it is in auto "
+ "mode\n");
+ tp_features.fan_ctrl_status_undef = 1;
+ }
+ } else {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "fan status and control unavailable\n");
+ return 1;
+ }
+ }
+
+ if (sfan_handle) {
+ /* 570, 770x-JL */
+ fan_control_access_mode = TPACPI_FAN_WR_ACPI_SFAN;
+ fan_control_commands |=
+ TPACPI_FAN_CMD_LEVEL | TPACPI_FAN_CMD_ENABLE;
+ } else {
+ if (!gfan_handle) {
+ /* gfan without sfan means no fan control */
+ /* all other models implement TP EC 0x2f control */
+
+ if (fans_handle) {
+ /* X31, X40, X41 */
+ fan_control_access_mode =
+ TPACPI_FAN_WR_ACPI_FANS;
+ fan_control_commands |=
+ TPACPI_FAN_CMD_SPEED |
+ TPACPI_FAN_CMD_LEVEL |
+ TPACPI_FAN_CMD_ENABLE;
+ } else {
+ fan_control_access_mode = TPACPI_FAN_WR_TPEC;
+ fan_control_commands |=
+ TPACPI_FAN_CMD_LEVEL |
+ TPACPI_FAN_CMD_ENABLE;
+ }
+ }
+ }
+
+ vdbg_printk(TPACPI_DBG_INIT, "fan is %s, modes %d, %d\n",
+ str_supported(fan_status_access_mode != TPACPI_FAN_NONE ||
+ fan_control_access_mode != TPACPI_FAN_WR_NONE),
+ fan_status_access_mode, fan_control_access_mode);
+
+ /* fan control master switch */
+ if (!fan_control_allowed) {
+ fan_control_access_mode = TPACPI_FAN_WR_NONE;
+ fan_control_commands = 0;
+ dbg_printk(TPACPI_DBG_INIT,
+ "fan control features disabled by parameter\n");
+ }
+
+ /* update fan_control_desired_level */
+ if (fan_status_access_mode != TPACPI_FAN_NONE)
+ fan_get_status_safe(NULL);
+
+ if (fan_status_access_mode != TPACPI_FAN_NONE ||
+ fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+ rc = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ &fan_attr_group);
+ if (!(rc < 0))
+ rc = driver_create_file(&tpacpi_pdriver.driver,
+ &driver_attr_fan_watchdog);
+ if (rc < 0)
+ return rc;
+ return 0;
+ } else
+ return 1;
+}
+
+/*
+ * Call with fan_mutex held
+ */
+static void fan_update_desired_level(u8 status)
+{
+ if ((status &
+ (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) == 0) {
+ if (status > 7)
+ fan_control_desired_level = 7;
+ else
+ fan_control_desired_level = status;
+ }
+}
+
+static int fan_get_status(u8 *status)
+{
+ u8 s;
+
+ /* TODO:
+ * Add TPACPI_FAN_RD_ACPI_FANS ? */
+
+ switch (fan_status_access_mode) {
+ case TPACPI_FAN_RD_ACPI_GFAN:
+ /* 570, 600e/x, 770e, 770x */
+
+ if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
+ return -EIO;
+
+ if (likely(status))
+ *status = s & 0x07;
+
+ break;
+
+ case TPACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
+ return -EIO;
+
+ if (likely(status))
+ *status = s;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static int fan_get_status_safe(u8 *status)
+{
+ int rc;
+ u8 s;
+
+ rc = mutex_lock_interruptible(&fan_mutex);
+ if (rc < 0)
+ return rc;
+ rc = fan_get_status(&s);
+ if (!rc)
+ fan_update_desired_level(s);
+ mutex_unlock(&fan_mutex);
+
+ if (status)
+ *status = s;
+
+ return rc;
+}
+
+static void fan_exit(void)
+{
+ vdbg_printk(TPACPI_DBG_EXIT, "cancelling any pending fan watchdog tasks\n");
+
+ /* FIXME: can we really do this unconditionally? */
+ sysfs_remove_group(&tpacpi_pdev->dev.kobj, &fan_attr_group);
+ driver_remove_file(&tpacpi_pdriver.driver, &driver_attr_fan_watchdog);
+
+ cancel_delayed_work(&fan_watchdog_task);
+ flush_scheduled_work();
+}
+
+static int fan_get_speed(unsigned int *speed)
+{
+ u8 hi, lo;
+
+ switch (fan_status_access_mode) {
+ case TPACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
+ !acpi_ec_read(fan_rpm_offset + 1, &hi)))
+ return -EIO;
+
+ if (likely(speed))
+ *speed = (hi << 8) | lo;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void fan_watchdog_fire(struct work_struct *ignored)
+{
+ int rc;
+
+ printk(IBM_NOTICE "fan watchdog: enabling fan\n");
+ rc = fan_set_enable();
+ if (rc < 0) {
+ printk(IBM_ERR "fan watchdog: error %d while enabling fan, "
+ "will try again later...\n", -rc);
+ /* reschedule for later */
+ fan_watchdog_reset();
+ }
+}
+
+static void fan_watchdog_reset(void)
+{
+ static int fan_watchdog_active = 0;
+
+ if (fan_control_access_mode == TPACPI_FAN_WR_NONE)
+ return;
+
+ if (fan_watchdog_active)
+ cancel_delayed_work(&fan_watchdog_task);
+
+ if (fan_watchdog_maxinterval > 0) {
+ fan_watchdog_active = 1;
+ if (!schedule_delayed_work(&fan_watchdog_task,
+ msecs_to_jiffies(fan_watchdog_maxinterval
+ * 1000))) {
+ printk(IBM_ERR "failed to schedule the fan watchdog, "
+ "watchdog will not trigger\n");
+ }
+ } else
+ fan_watchdog_active = 0;
+}
+
+static int fan_set_level(int level)
+{
+ if (!fan_control_allowed)
+ return -EPERM;
+
+ switch (fan_control_access_mode) {
+ case TPACPI_FAN_WR_ACPI_SFAN:
+ if (level >= 0 && level <= 7) {
+ if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
+ return -EIO;
+ } else
+ return -EINVAL;
+ break;
+
+ case TPACPI_FAN_WR_ACPI_FANS:
+ case TPACPI_FAN_WR_TPEC:
+ if ((level != TP_EC_FAN_AUTO) &&
+ (level != TP_EC_FAN_FULLSPEED) &&
+ ((level < 0) || (level > 7)))
+ return -EINVAL;
+
+ /* safety net should the EC not support AUTO
+ * or FULLSPEED mode bits and just ignore them */
+ if (level & TP_EC_FAN_FULLSPEED)
+ level |= 7; /* safety min speed 7 */
+ else if (level & TP_EC_FAN_FULLSPEED)
+ level |= 4; /* safety min speed 4 */
+
+ if (!acpi_ec_write(fan_status_offset, level))
+ return -EIO;
+ else
+ tp_features.fan_ctrl_status_undef = 0;
+ break;
+
+ default:
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int fan_set_level_safe(int level)
+{
+ int rc;
+
+ if (!fan_control_allowed)
+ return -EPERM;
+
+ rc = mutex_lock_interruptible(&fan_mutex);
+ if (rc < 0)
+ return rc;
+
+ if (level == TPACPI_FAN_LAST_LEVEL)
+ level = fan_control_desired_level;
+
+ rc = fan_set_level(level);
+ if (!rc)
+ fan_update_desired_level(level);
+
+ mutex_unlock(&fan_mutex);
+ return rc;
+}
+
+static int fan_set_enable(void)
+{
+ u8 s;
+ int rc;
+
+ if (!fan_control_allowed)
+ return -EPERM;
+
+ rc = mutex_lock_interruptible(&fan_mutex);
+ if (rc < 0)
+ return rc;
+
+ switch (fan_control_access_mode) {
+ case TPACPI_FAN_WR_ACPI_FANS:
+ case TPACPI_FAN_WR_TPEC:
+ rc = fan_get_status(&s);
+ if (rc < 0)
+ break;
+
+ /* Don't go out of emergency fan mode */
+ if (s != 7) {
+ s &= 0x07;
+ s |= TP_EC_FAN_AUTO | 4; /* min fan speed 4 */
+ }
+
+ if (!acpi_ec_write(fan_status_offset, s))
+ rc = -EIO;
+ else {
+ tp_features.fan_ctrl_status_undef = 0;
+ rc = 0;
+ }
+ break;
+
+ case TPACPI_FAN_WR_ACPI_SFAN:
+ rc = fan_get_status(&s);
+ if (rc < 0)
+ break;
+
+ s &= 0x07;
+
+ /* Set fan to at least level 4 */
+ s |= 4;
+
+ if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
+ rc= -EIO;
+ else
+ rc = 0;
+ break;
+
+ default:
+ rc = -ENXIO;
+ }
+
+ mutex_unlock(&fan_mutex);
+ return rc;
+}
+
+static int fan_set_disable(void)
+{
+ int rc;
+
+ if (!fan_control_allowed)
+ return -EPERM;
+
+ rc = mutex_lock_interruptible(&fan_mutex);
+ if (rc < 0)
+ return rc;
+
+ rc = 0;
+ switch (fan_control_access_mode) {
+ case TPACPI_FAN_WR_ACPI_FANS:
+ case TPACPI_FAN_WR_TPEC:
+ if (!acpi_ec_write(fan_status_offset, 0x00))
+ rc = -EIO;
+ else {
+ fan_control_desired_level = 0;
+ tp_features.fan_ctrl_status_undef = 0;
+ }
+ break;
+
+ case TPACPI_FAN_WR_ACPI_SFAN:
+ if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
+ rc = -EIO;
+ else
+ fan_control_desired_level = 0;
+ break;
+
+ default:
+ rc = -ENXIO;
+ }
+
+
+ mutex_unlock(&fan_mutex);
+ return rc;
+}
+
+static int fan_set_speed(int speed)
+{
+ int rc;
+
+ if (!fan_control_allowed)
+ return -EPERM;
+
+ rc = mutex_lock_interruptible(&fan_mutex);
+ if (rc < 0)
+ return rc;
+
+ rc = 0;
+ switch (fan_control_access_mode) {
+ case TPACPI_FAN_WR_ACPI_FANS:
+ if (speed >= 0 && speed <= 65535) {
+ if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
+ speed, speed, speed))
+ rc = -EIO;
+ } else
+ rc = -EINVAL;
+ break;
+
+ default:
+ rc = -ENXIO;
+ }
+
+ mutex_unlock(&fan_mutex);
+ return rc;
+}
+
+static int fan_read(char *p)
+{
+ int len = 0;
+ int rc;
+ u8 status;
+ unsigned int speed = 0;
+
+ switch (fan_status_access_mode) {
+ case TPACPI_FAN_RD_ACPI_GFAN:
+ /* 570, 600e/x, 770e, 770x */
+ if ((rc = fan_get_status_safe(&status)) < 0)
+ return rc;
+
+ len += sprintf(p + len, "status:\t\t%s\n"
+ "level:\t\t%d\n",
+ (status != 0) ? "enabled" : "disabled", status);
+ break;
+
+ case TPACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if ((rc = fan_get_status_safe(&status)) < 0)
+ return rc;
+
+ if (unlikely(tp_features.fan_ctrl_status_undef)) {
+ if (status != fan_control_initial_status)
+ tp_features.fan_ctrl_status_undef = 0;
+ else
+ /* Return most likely status. In fact, it
+ * might be the only possible status */
+ status = TP_EC_FAN_AUTO;
+ }
+
+ len += sprintf(p + len, "status:\t\t%s\n",
+ (status != 0) ? "enabled" : "disabled");
+
+ if ((rc = fan_get_speed(&speed)) < 0)
+ return rc;
+
+ len += sprintf(p + len, "speed:\t\t%d\n", speed);
+
+ if (status & TP_EC_FAN_FULLSPEED)
+ /* Disengaged mode takes precedence */
+ len += sprintf(p + len, "level:\t\tdisengaged\n");
+ else if (status & TP_EC_FAN_AUTO)
+ len += sprintf(p + len, "level:\t\tauto\n");
+ else
+ len += sprintf(p + len, "level:\t\t%d\n", status);
+ break;
+
+ case TPACPI_FAN_NONE:
+ default:
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ }
+
+ if (fan_control_commands & TPACPI_FAN_CMD_LEVEL) {
+ len += sprintf(p + len, "commands:\tlevel <level>");
+
+ switch (fan_control_access_mode) {
+ case TPACPI_FAN_WR_ACPI_SFAN:
+ len += sprintf(p + len, " (<level> is 0-7)\n");
+ break;
+
+ default:
+ len += sprintf(p + len, " (<level> is 0-7, "
+ "auto, disengaged, full-speed)\n");
+ break;
+ }
+ }
+
+ if (fan_control_commands & TPACPI_FAN_CMD_ENABLE)
+ len += sprintf(p + len, "commands:\tenable, disable\n"
+ "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
+ "1-120 (seconds))\n");
+
+ if (fan_control_commands & TPACPI_FAN_CMD_SPEED)
+ len += sprintf(p + len, "commands:\tspeed <speed>"
+ " (<speed> is 0-65535)\n");
+
+ return len;
+}
+
+static int fan_write_cmd_level(const char *cmd, int *rc)
+{
+ int level;
+
+ if (strlencmp(cmd, "level auto") == 0)
+ level = TP_EC_FAN_AUTO;
+ else if ((strlencmp(cmd, "level disengaged") == 0) |
+ (strlencmp(cmd, "level full-speed") == 0))
+ level = TP_EC_FAN_FULLSPEED;
+ else if (sscanf(cmd, "level %d", &level) != 1)
+ return 0;
+
+ if ((*rc = fan_set_level_safe(level)) == -ENXIO)
+ printk(IBM_ERR "level command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_enable(const char *cmd, int *rc)
+{
+ if (strlencmp(cmd, "enable") != 0)
+ return 0;
+
+ if ((*rc = fan_set_enable()) == -ENXIO)
+ printk(IBM_ERR "enable command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_disable(const char *cmd, int *rc)
+{
+ if (strlencmp(cmd, "disable") != 0)
+ return 0;
+
+ if ((*rc = fan_set_disable()) == -ENXIO)
+ printk(IBM_ERR "disable command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_speed(const char *cmd, int *rc)
+{
+ int speed;
+
+ /* TODO:
+ * Support speed <low> <medium> <high> ? */
+
+ if (sscanf(cmd, "speed %d", &speed) != 1)
+ return 0;
+
+ if ((*rc = fan_set_speed(speed)) == -ENXIO)
+ printk(IBM_ERR "speed command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_watchdog(const char *cmd, int *rc)
+{
+ int interval;
+
+ if (sscanf(cmd, "watchdog %d", &interval) != 1)
+ return 0;
+
+ if (interval < 0 || interval > 120)
+ *rc = -EINVAL;
+ else
+ fan_watchdog_maxinterval = interval;
+
+ return 1;
+}
+
+static int fan_write(char *buf)
+{
+ char *cmd;
+ int rc = 0;
+
+ while (!rc && (cmd = next_cmd(&buf))) {
+ if (!((fan_control_commands & TPACPI_FAN_CMD_LEVEL) &&
+ fan_write_cmd_level(cmd, &rc)) &&
+ !((fan_control_commands & TPACPI_FAN_CMD_ENABLE) &&
+ (fan_write_cmd_enable(cmd, &rc) ||
+ fan_write_cmd_disable(cmd, &rc) ||
+ fan_write_cmd_watchdog(cmd, &rc))) &&
+ !((fan_control_commands & TPACPI_FAN_CMD_SPEED) &&
+ fan_write_cmd_speed(cmd, &rc))
+ )
+ rc = -EINVAL;
+ else if (!rc)
+ fan_watchdog_reset();
+ }
+
+ return rc;
+}
+
+static struct ibm_struct fan_driver_data = {
+ .name = "fan",
+ .read = fan_read,
+ .write = fan_write,
+ .exit = fan_exit,
+};
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Infrastructure
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/* /proc support */
+static struct proc_dir_entry *proc_dir = NULL;
+
+/* Subdriver registry */
+static LIST_HEAD(tpacpi_all_drivers);
+
+
+/*
+ * Module and infrastructure proble, init and exit handling
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUG
+static const char * __init str_supported(int is_supported)
+{
+ static char text_unsupported[] __initdata = "not supported";
+
+ return (is_supported)? &text_unsupported[4] : &text_unsupported[0];
+}
+#endif /* CONFIG_THINKPAD_ACPI_DEBUG */
+
+static int __init ibm_init(struct ibm_init_struct *iibm)
+{
+ int ret;
+ struct ibm_struct *ibm = iibm->data;
+ struct proc_dir_entry *entry;
+
+ BUG_ON(ibm == NULL);
+
+ INIT_LIST_HEAD(&ibm->all_drivers);
+
+ if (ibm->flags.experimental && !experimental)
+ return 0;
+
+ dbg_printk(TPACPI_DBG_INIT,
+ "probing for %s\n", ibm->name);
+
+ if (iibm->init) {
+ ret = iibm->init(iibm);
+ if (ret > 0)
+ return 0; /* probe failed */
+ if (ret)
+ return ret;
+
+ ibm->flags.init_called = 1;
+ }
+
+ if (ibm->acpi) {
+ if (ibm->acpi->hid) {
+ ret = register_tpacpi_subdriver(ibm);
+ if (ret)
+ goto err_out;
+ }
+
+ if (ibm->acpi->notify) {
+ ret = setup_acpi_notify(ibm);
+ if (ret == -ENODEV) {
+ printk(IBM_NOTICE "disabling subdriver %s\n",
+ ibm->name);
+ ret = 0;
+ goto err_out;
+ }
+ if (ret < 0)
+ goto err_out;
+ }
+ }
+
+ dbg_printk(TPACPI_DBG_INIT,
+ "%s installed\n", ibm->name);
+
+ if (ibm->read) {
+ entry = create_proc_entry(ibm->name,
+ S_IFREG | S_IRUGO | S_IWUSR,
+ proc_dir);
+ if (!entry) {
+ printk(IBM_ERR "unable to create proc entry %s\n",
+ ibm->name);
+ ret = -ENODEV;
+ goto err_out;
+ }
+ entry->owner = THIS_MODULE;
+ entry->data = ibm;
+ entry->read_proc = &dispatch_procfs_read;
+ if (ibm->write)
+ entry->write_proc = &dispatch_procfs_write;
+ ibm->flags.proc_created = 1;
+ }
+
+ list_add_tail(&ibm->all_drivers, &tpacpi_all_drivers);
+
+ return 0;
+
+err_out:
+ dbg_printk(TPACPI_DBG_INIT,
+ "%s: at error exit path with result %d\n",
+ ibm->name, ret);
+
+ ibm_exit(ibm);
+ return (ret < 0)? ret : 0;
+}
+
+static void ibm_exit(struct ibm_struct *ibm)
+{
+ dbg_printk(TPACPI_DBG_EXIT, "removing %s\n", ibm->name);
+
+ list_del_init(&ibm->all_drivers);
+
+ if (ibm->flags.acpi_notify_installed) {
+ dbg_printk(TPACPI_DBG_EXIT,
+ "%s: acpi_remove_notify_handler\n", ibm->name);
+ BUG_ON(!ibm->acpi);
+ acpi_remove_notify_handler(*ibm->acpi->handle,
+ ibm->acpi->type,
+ dispatch_acpi_notify);
+ ibm->flags.acpi_notify_installed = 0;
+ ibm->flags.acpi_notify_installed = 0;
+ }
+
+ if (ibm->flags.proc_created) {
+ dbg_printk(TPACPI_DBG_EXIT,
+ "%s: remove_proc_entry\n", ibm->name);
+ remove_proc_entry(ibm->name, proc_dir);
+ ibm->flags.proc_created = 0;
+ }
+
+ if (ibm->flags.acpi_driver_registered) {
+ dbg_printk(TPACPI_DBG_EXIT,
+ "%s: acpi_bus_unregister_driver\n", ibm->name);
+ BUG_ON(!ibm->acpi);
+ acpi_bus_unregister_driver(ibm->acpi->driver);
+ kfree(ibm->acpi->driver);
+ ibm->acpi->driver = NULL;
+ ibm->flags.acpi_driver_registered = 0;
+ }
+
+ if (ibm->flags.init_called && ibm->exit) {
+ ibm->exit();
+ ibm->flags.init_called = 0;
+ }
+
+ dbg_printk(TPACPI_DBG_INIT, "finished removing %s\n", ibm->name);
+}
+
+/* Probing */
+
+static char *ibm_thinkpad_ec_found = NULL;
+
+static char* __init check_dmi_for_ec(void)
+{
+ struct dmi_device *dev = NULL;
+ char ec_fw_string[18];
+
+ /*
+ * ThinkPad T23 or newer, A31 or newer, R50e or newer,
+ * X32 or newer, all Z series; Some models must have an
+ * up-to-date BIOS or they will not be detected.
+ *
+ * See http://thinkwiki.org/wiki/List_of_DMI_IDs
+ */
+ while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
+ if (sscanf(dev->name,
+ "IBM ThinkPad Embedded Controller -[%17c",
+ ec_fw_string) == 1) {
+ ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
+ ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
+ return kstrdup(ec_fw_string, GFP_KERNEL);
+ }
+ }
+ return NULL;
+}
+
+static int __init probe_for_thinkpad(void)
+{
+ int is_thinkpad;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ /*
+ * Non-ancient models have better DMI tagging, but very old models
+ * don't.
+ */
+ is_thinkpad = dmi_name_in_vendors("ThinkPad");
+
+ /* ec is required because many other handles are relative to it */
+ IBM_ACPIHANDLE_INIT(ec);
+ if (!ec_handle) {
+ if (is_thinkpad)
+ printk(IBM_ERR
+ "Not yet supported ThinkPad detected!\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Risks a regression on very old machines, but reduces potential
+ * false positives a damn great deal
+ */
+ if (!is_thinkpad)
+ is_thinkpad = dmi_name_in_vendors("IBM");
+
+ if (!is_thinkpad && !force_load)
+ return -ENODEV;
+
+ return 0;
+}
+
+
+/* Module init, exit, parameters */
+
+static struct ibm_init_struct ibms_init[] __initdata = {
+ {
+ .init = thinkpad_acpi_driver_init,
+ .data = &thinkpad_acpi_driver_data,
+ },
+ {
+ .init = hotkey_init,
+ .data = &hotkey_driver_data,
+ },
+ {
+ .init = bluetooth_init,
+ .data = &bluetooth_driver_data,
+ },
+ {
+ .init = wan_init,
+ .data = &wan_driver_data,
+ },
+ {
+ .init = video_init,
+ .data = &video_driver_data,
+ },
+ {
+ .init = light_init,
+ .data = &light_driver_data,
+ },
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+ {
+ .init = dock_init,
+ .data = &dock_driver_data[0],
+ },
+ {
+ .init = dock_init2,
+ .data = &dock_driver_data[1],
+ },
+#endif
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+ {
+ .init = bay_init,
+ .data = &bay_driver_data,
+ },
+#endif
+ {
+ .init = cmos_init,
+ .data = &cmos_driver_data,
+ },
+ {
+ .init = led_init,
+ .data = &led_driver_data,
+ },
+ {
+ .init = beep_init,
+ .data = &beep_driver_data,
+ },
+ {
+ .init = thermal_init,
+ .data = &thermal_driver_data,
+ },
+ {
+ .data = &ecdump_driver_data,
+ },
+ {
+ .init = brightness_init,
+ .data = &brightness_driver_data,
+ },
+ {
+ .data = &volume_driver_data,
+ },
+ {
+ .init = fan_init,
+ .data = &fan_driver_data,
+ },
+};
+
+static int __init set_ibm_param(const char *val, struct kernel_param *kp)
+{
+ unsigned int i;
+ struct ibm_struct *ibm;
+
+ for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
+ ibm = ibms_init[i].data;
+ BUG_ON(ibm == NULL);
+
+ if (strcmp(ibm->name, kp->name) == 0 && ibm->write) {
+ if (strlen(val) > sizeof(ibms_init[i].param) - 2)
+ return -ENOSPC;
+ strcpy(ibms_init[i].param, val);
+ strcat(ibms_init[i].param, ",");
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int experimental;
+module_param(experimental, int, 0);
+
+static u32 dbg_level;
+module_param_named(debug, dbg_level, uint, 0);
+
+static int force_load;
+module_param(force_load, int, 0);
+
+static int fan_control_allowed;
+module_param_named(fan_control, fan_control_allowed, int, 0);
+
+#define IBM_PARAM(feature) \
+ module_param_call(feature, set_ibm_param, NULL, NULL, 0)
+
+IBM_PARAM(hotkey);
+IBM_PARAM(bluetooth);
+IBM_PARAM(video);
+IBM_PARAM(light);
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+IBM_PARAM(dock);
+#endif
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+IBM_PARAM(bay);
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+IBM_PARAM(cmos);
+IBM_PARAM(led);
+IBM_PARAM(beep);
+IBM_PARAM(ecdump);
+IBM_PARAM(brightness);
+IBM_PARAM(volume);
+IBM_PARAM(fan);
+
+static int __init thinkpad_acpi_module_init(void)
+{
+ int ret, i;
+
+ /* Driver-level probe */
+ ret = probe_for_thinkpad();
+ if (ret)
+ return ret;
+
+ /* Driver initialization */
+ ibm_thinkpad_ec_found = check_dmi_for_ec();
+ IBM_ACPIHANDLE_INIT(ecrd);
+ IBM_ACPIHANDLE_INIT(ecwr);
+
+ proc_dir = proc_mkdir(IBM_PROC_DIR, acpi_root_dir);
+ if (!proc_dir) {
+ printk(IBM_ERR "unable to create proc dir " IBM_PROC_DIR);
+ thinkpad_acpi_module_exit();
+ return -ENODEV;
+ }
+ proc_dir->owner = THIS_MODULE;
+
+ ret = platform_driver_register(&tpacpi_pdriver);
+ if (ret) {
+ printk(IBM_ERR "unable to register platform driver\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ ret = tpacpi_create_driver_attributes(&tpacpi_pdriver.driver);
+ if (ret) {
+ printk(IBM_ERR "unable to create sysfs driver attributes\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+
+
+ /* Device initialization */
+ tpacpi_pdev = platform_device_register_simple(IBM_DRVR_NAME, -1,
+ NULL, 0);
+ if (IS_ERR(tpacpi_pdev)) {
+ ret = PTR_ERR(tpacpi_pdev);
+ tpacpi_pdev = NULL;
+ printk(IBM_ERR "unable to register platform device\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ tpacpi_hwmon = hwmon_device_register(&tpacpi_pdev->dev);
+ if (IS_ERR(tpacpi_hwmon)) {
+ ret = PTR_ERR(tpacpi_hwmon);
+ tpacpi_hwmon = NULL;
+ printk(IBM_ERR "unable to register hwmon device\n");
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
+ ret = ibm_init(&ibms_init[i]);
+ if (ret >= 0 && *ibms_init[i].param)
+ ret = ibms_init[i].data->write(ibms_init[i].param);
+ if (ret < 0) {
+ thinkpad_acpi_module_exit();
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void thinkpad_acpi_module_exit(void)
+{
+ struct ibm_struct *ibm, *itmp;
+
+ list_for_each_entry_safe_reverse(ibm, itmp,
+ &tpacpi_all_drivers,
+ all_drivers) {
+ ibm_exit(ibm);
+ }
+
+ dbg_printk(TPACPI_DBG_INIT, "finished subdriver exit path...\n");
+
+ if (tpacpi_hwmon)
+ hwmon_device_unregister(tpacpi_hwmon);
+
+ if (tpacpi_pdev)
+ platform_device_unregister(tpacpi_pdev);
+
+ tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver);
+ platform_driver_unregister(&tpacpi_pdriver);
+
+ if (proc_dir)
+ remove_proc_entry(IBM_PROC_DIR, acpi_root_dir);
+
+ kfree(ibm_thinkpad_ec_found);
+}
+
+module_init(thinkpad_acpi_module_init);
+module_exit(thinkpad_acpi_module_exit);
--- /dev/null
+/*
+ * thinkpad_acpi.h - ThinkPad ACPI Extras
+ *
+ *
+ * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
+ * Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __THINKPAD_ACPI_H__
+#define __THINKPAD_ACPI_H__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysfs.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <asm/uaccess.h>
+
+#include <linux/dmi.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+
+#include <acpi/acpi_drivers.h>
+#include <acpi/acnamesp.h>
+
+
+/****************************************************************************
+ * Main driver
+ */
+
+#define IBM_NAME "thinkpad"
+#define IBM_DESC "ThinkPad ACPI Extras"
+#define IBM_FILE "thinkpad_acpi"
+#define IBM_URL "http://ibm-acpi.sf.net/"
+#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net"
+
+#define IBM_PROC_DIR "ibm"
+#define IBM_ACPI_EVENT_PREFIX "ibm"
+#define IBM_DRVR_NAME IBM_FILE
+
+#define IBM_LOG IBM_FILE ": "
+#define IBM_ERR KERN_ERR IBM_LOG
+#define IBM_NOTICE KERN_NOTICE IBM_LOG
+#define IBM_INFO KERN_INFO IBM_LOG
+#define IBM_DEBUG KERN_DEBUG IBM_LOG
+
+#define IBM_MAX_ACPI_ARGS 3
+
+/* ThinkPad CMOS commands */
+#define TP_CMOS_VOLUME_DOWN 0
+#define TP_CMOS_VOLUME_UP 1
+#define TP_CMOS_VOLUME_MUTE 2
+#define TP_CMOS_BRIGHTNESS_UP 4
+#define TP_CMOS_BRIGHTNESS_DOWN 5
+
+#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
+#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
+#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
+
+/* Debugging */
+#define TPACPI_DBG_ALL 0xffff
+#define TPACPI_DBG_ALL 0xffff
+#define TPACPI_DBG_INIT 0x0001
+#define TPACPI_DBG_EXIT 0x0002
+#define dbg_printk(a_dbg_level, format, arg...) \
+ do { if (dbg_level & a_dbg_level) \
+ printk(IBM_DEBUG "%s: " format, __func__ , ## arg); } while (0)
+#ifdef CONFIG_THINKPAD_ACPI_DEBUG
+#define vdbg_printk(a_dbg_level, format, arg...) \
+ dbg_printk(a_dbg_level, format, ## arg)
+static const char *str_supported(int is_supported);
+#else
+#define vdbg_printk(a_dbg_level, format, arg...)
+#endif
+
+/* ACPI HIDs */
+#define IBM_HKEY_HID "IBM0068"
+#define IBM_PCI_HID "PNP0A03"
+
+/* ACPI helpers */
+static int __must_check acpi_evalf(acpi_handle handle,
+ void *res, char *method, char *fmt, ...);
+static int __must_check acpi_ec_read(int i, u8 * p);
+static int __must_check acpi_ec_write(int i, u8 v);
+static int __must_check _sta(acpi_handle handle);
+
+/* ACPI handles */
+static acpi_handle root_handle; /* root namespace */
+static acpi_handle ec_handle; /* EC */
+static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */
+static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */
+
+static void drv_acpi_handle_init(char *name,
+ acpi_handle *handle, acpi_handle parent,
+ char **paths, int num_paths, char **path);
+#define IBM_ACPIHANDLE_INIT(object) \
+ drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \
+ object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
+
+/* ThinkPad ACPI helpers */
+static int issue_thinkpad_cmos_command(int cmos_cmd);
+
+/* procfs support */
+static struct proc_dir_entry *proc_dir;
+
+/* procfs helpers */
+static int dispatch_procfs_read(char *page, char **start, off_t off,
+ int count, int *eof, void *data);
+static int dispatch_procfs_write(struct file *file,
+ const char __user * userbuf,
+ unsigned long count, void *data);
+static char *next_cmd(char **cmds);
+
+/* sysfs support */
+struct attribute_set {
+ unsigned int members, max_members;
+ struct attribute_group group;
+};
+
+static struct attribute_set *create_attr_set(unsigned int max_members,
+ const char* name);
+#define destroy_attr_set(_set) \
+ kfree(_set);
+static int add_to_attr_set(struct attribute_set* s, struct attribute *attr);
+static int add_many_to_attr_set(struct attribute_set* s,
+ struct attribute **attr,
+ unsigned int count);
+#define register_attr_set_with_sysfs(_attr_set, _kobj) \
+ sysfs_create_group(_kobj, &_attr_set->group)
+static void delete_attr_set(struct attribute_set* s, struct kobject *kobj);
+
+static int parse_strtoul(const char *buf, unsigned long max,
+ unsigned long *value);
+
+/* Device model */
+static struct platform_device *tpacpi_pdev;
+static struct class_device *tpacpi_hwmon;
+static struct platform_driver tpacpi_pdriver;
+static int tpacpi_create_driver_attributes(struct device_driver *drv);
+static void tpacpi_remove_driver_attributes(struct device_driver *drv);
+
+/* Module */
+static int experimental;
+static u32 dbg_level;
+static int force_load;
+static char *ibm_thinkpad_ec_found;
+
+static char* check_dmi_for_ec(void);
+static int thinkpad_acpi_module_init(void);
+static void thinkpad_acpi_module_exit(void);
+
+
+/****************************************************************************
+ * Subdrivers
+ */
+
+struct ibm_struct;
+
+struct tp_acpi_drv_struct {
+ char *hid;
+ struct acpi_driver *driver;
+
+ void (*notify) (struct ibm_struct *, u32);
+ acpi_handle *handle;
+ u32 type;
+ struct acpi_device *device;
+};
+
+struct ibm_struct {
+ char *name;
+
+ int (*read) (char *);
+ int (*write) (char *);
+ void (*exit) (void);
+
+ struct list_head all_drivers;
+
+ struct tp_acpi_drv_struct *acpi;
+
+ struct {
+ u8 acpi_driver_registered:1;
+ u8 acpi_notify_installed:1;
+ u8 proc_created:1;
+ u8 init_called:1;
+ u8 experimental:1;
+ } flags;
+};
+
+struct ibm_init_struct {
+ char param[32];
+
+ int (*init) (struct ibm_init_struct *);
+ struct ibm_struct *data;
+};
+
+static struct {
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+ u16 bay_status:1;
+ u16 bay_eject:1;
+ u16 bay_status2:1;
+ u16 bay_eject2:1;
+#endif
+ u16 bluetooth:1;
+ u16 hotkey:1;
+ u16 hotkey_mask:1;
+ u16 light:1;
+ u16 light_status:1;
+ u16 wan:1;
+ u16 fan_ctrl_status_undef:1;
+} tp_features;
+
+static struct list_head tpacpi_all_drivers;
+
+static struct ibm_init_struct ibms_init[];
+static int set_ibm_param(const char *val, struct kernel_param *kp);
+static int ibm_init(struct ibm_init_struct *iibm);
+static void ibm_exit(struct ibm_struct *ibm);
+
+
+/*
+ * procfs master subdriver
+ */
+static int thinkpad_acpi_driver_init(struct ibm_init_struct *iibm);
+static int thinkpad_acpi_driver_read(char *p);
+
+
+/*
+ * Bay subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+static acpi_handle bay_handle, bay_ej_handle;
+static acpi_handle bay2_handle, bay2_ej_handle;
+
+static int bay_init(struct ibm_init_struct *iibm);
+static void bay_notify(struct ibm_struct *ibm, u32 event);
+static int bay_read(char *p);
+static int bay_write(char *buf);
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+
+
+/*
+ * Beep subdriver
+ */
+
+static acpi_handle beep_handle;
+
+static int beep_read(char *p);
+static int beep_write(char *buf);
+
+
+/*
+ * Bluetooth subdriver
+ */
+
+#define TPACPI_BLUETH_SYSFS_GROUP "bluetooth"
+
+enum {
+ /* ACPI GBDC/SBDC bits */
+ TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */
+ TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */
+ TP_ACPI_BLUETOOTH_UNK = 0x04, /* unknown function */
+};
+
+static int bluetooth_init(struct ibm_init_struct *iibm);
+static int bluetooth_get_radiosw(void);
+static int bluetooth_set_radiosw(int radio_on);
+static int bluetooth_read(char *p);
+static int bluetooth_write(char *buf);
+
+
+/*
+ * Brightness (backlight) subdriver
+ */
+
+#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen"
+
+static struct backlight_device *ibm_backlight_device;
+static int brightness_offset = 0x31;
+
+static int brightness_init(struct ibm_init_struct *iibm);
+static void brightness_exit(void);
+static int brightness_get(struct backlight_device *bd);
+static int brightness_set(int value);
+static int brightness_update_status(struct backlight_device *bd);
+static int brightness_read(char *p);
+static int brightness_write(char *buf);
+
+
+/*
+ * CMOS subdriver
+ */
+
+static int cmos_read(char *p);
+static int cmos_write(char *buf);
+
+
+/*
+ * Dock subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+static acpi_handle pci_handle;
+static acpi_handle dock_handle;
+
+static void dock_notify(struct ibm_struct *ibm, u32 event);
+static int dock_read(char *p);
+static int dock_write(char *buf);
+#endif /* CONFIG_THINKPAD_ACPI_DOCK */
+
+
+/*
+ * EC dump subdriver
+ */
+
+static int ecdump_read(char *p) ;
+static int ecdump_write(char *buf);
+
+
+/*
+ * Fan subdriver
+ */
+
+enum { /* Fan control constants */
+ fan_status_offset = 0x2f, /* EC register 0x2f */
+ fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
+ * 0x84 must be read before 0x85 */
+
+ TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */
+ TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */
+
+ TPACPI_FAN_LAST_LEVEL = 0x100, /* Use cached last-seen fan level */
+};
+
+enum fan_status_access_mode {
+ TPACPI_FAN_NONE = 0, /* No fan status or control */
+ TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */
+ TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */
+};
+
+enum fan_control_access_mode {
+ TPACPI_FAN_WR_NONE = 0, /* No fan control */
+ TPACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */
+ TPACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */
+ TPACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */
+};
+
+enum fan_control_commands {
+ TPACPI_FAN_CMD_SPEED = 0x0001, /* speed command */
+ TPACPI_FAN_CMD_LEVEL = 0x0002, /* level command */
+ TPACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd,
+ * and also watchdog cmd */
+};
+
+static int fan_control_allowed;
+
+static enum fan_status_access_mode fan_status_access_mode;
+static enum fan_control_access_mode fan_control_access_mode;
+static enum fan_control_commands fan_control_commands;
+static u8 fan_control_initial_status;
+static u8 fan_control_desired_level;
+static int fan_watchdog_maxinterval;
+
+static struct mutex fan_mutex;
+
+static acpi_handle fans_handle, gfan_handle, sfan_handle;
+
+static int fan_init(struct ibm_init_struct *iibm);
+static void fan_exit(void);
+static int fan_get_status(u8 *status);
+static int fan_get_status_safe(u8 *status);
+static int fan_get_speed(unsigned int *speed);
+static void fan_update_desired_level(u8 status);
+static void fan_watchdog_fire(struct work_struct *ignored);
+static void fan_watchdog_reset(void);
+static int fan_set_level(int level);
+static int fan_set_level_safe(int level);
+static int fan_set_enable(void);
+static int fan_set_disable(void);
+static int fan_set_speed(int speed);
+static int fan_read(char *p);
+static int fan_write(char *buf);
+static int fan_write_cmd_level(const char *cmd, int *rc);
+static int fan_write_cmd_enable(const char *cmd, int *rc);
+static int fan_write_cmd_disable(const char *cmd, int *rc);
+static int fan_write_cmd_speed(const char *cmd, int *rc);
+static int fan_write_cmd_watchdog(const char *cmd, int *rc);
+
+
+/*
+ * Hotkey subdriver
+ */
+
+#define TPACPI_HOTKEY_SYSFS_GROUP "hotkey"
+
+static int hotkey_orig_status;
+static int hotkey_orig_mask;
+
+static struct mutex hotkey_mutex;
+
+static int hotkey_init(struct ibm_init_struct *iibm);
+static void hotkey_exit(void);
+static int hotkey_get(int *status, int *mask);
+static int hotkey_set(int status, int mask);
+static void hotkey_notify(struct ibm_struct *ibm, u32 event);
+static int hotkey_read(char *p);
+static int hotkey_write(char *buf);
+
+
+/*
+ * LED subdriver
+ */
+
+enum led_access_mode {
+ TPACPI_LED_NONE = 0,
+ TPACPI_LED_570, /* 570 */
+ TPACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+ TPACPI_LED_NEW, /* all others */
+};
+
+enum { /* For TPACPI_LED_OLD */
+ TPACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */
+ TPACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */
+ TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */
+};
+
+static enum led_access_mode led_supported;
+static acpi_handle led_handle;
+
+static int led_init(struct ibm_init_struct *iibm);
+static int led_read(char *p);
+static int led_write(char *buf);
+
+/*
+ * Light (thinklight) subdriver
+ */
+
+static acpi_handle lght_handle, ledb_handle;
+
+static int light_init(struct ibm_init_struct *iibm);
+static int light_read(char *p);
+static int light_write(char *buf);
+
+
+/*
+ * Thermal subdriver
+ */
+
+enum thermal_access_mode {
+ TPACPI_THERMAL_NONE = 0, /* No thermal support */
+ TPACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */
+ TPACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */
+ TPACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */
+ TPACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */
+};
+
+enum { /* TPACPI_THERMAL_TPEC_* */
+ TP_EC_THERMAL_TMP0 = 0x78, /* ACPI EC regs TMP 0..7 */
+ TP_EC_THERMAL_TMP8 = 0xC0, /* ACPI EC regs TMP 8..15 */
+ TP_EC_THERMAL_TMP_NA = -128, /* ACPI EC sensor not available */
+};
+
+#define TPACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */
+struct ibm_thermal_sensors_struct {
+ s32 temp[TPACPI_MAX_THERMAL_SENSORS];
+};
+
+static enum thermal_access_mode thermal_read_mode;
+
+static int thermal_init(struct ibm_init_struct *iibm);
+static int thermal_get_sensor(int idx, s32 *value);
+static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s);
+static int thermal_read(char *p);
+
+
+/*
+ * Video subdriver
+ */
+
+enum video_access_mode {
+ TPACPI_VIDEO_NONE = 0,
+ TPACPI_VIDEO_570, /* 570 */
+ TPACPI_VIDEO_770, /* 600e/x, 770e, 770x */
+ TPACPI_VIDEO_NEW, /* all others */
+};
+
+enum { /* video status flags, based on VIDEO_570 */
+ TP_ACPI_VIDEO_S_LCD = 0x01, /* LCD output enabled */
+ TP_ACPI_VIDEO_S_CRT = 0x02, /* CRT output enabled */
+ TP_ACPI_VIDEO_S_DVI = 0x08, /* DVI output enabled */
+};
+
+enum { /* TPACPI_VIDEO_570 constants */
+ TP_ACPI_VIDEO_570_PHSCMD = 0x87, /* unknown magic constant :( */
+ TP_ACPI_VIDEO_570_PHSMASK = 0x03, /* PHS bits that map to
+ * video_status_flags */
+ TP_ACPI_VIDEO_570_PHS2CMD = 0x8b, /* unknown magic constant :( */
+ TP_ACPI_VIDEO_570_PHS2SET = 0x80, /* unknown magic constant :( */
+};
+
+static enum video_access_mode video_supported;
+static int video_orig_autosw;
+static acpi_handle vid_handle, vid2_handle;
+
+static int video_init(struct ibm_init_struct *iibm);
+static void video_exit(void);
+static int video_outputsw_get(void);
+static int video_outputsw_set(int status);
+static int video_autosw_get(void);
+static int video_autosw_set(int enable);
+static int video_outputsw_cycle(void);
+static int video_expand_toggle(void);
+static int video_read(char *p);
+static int video_write(char *buf);
+
+
+/*
+ * Volume subdriver
+ */
+
+static int volume_offset = 0x30;
+
+static int volume_read(char *p);
+static int volume_write(char *buf);
+
+
+/*
+ * Wan subdriver
+ */
+
+#define TPACPI_WAN_SYSFS_GROUP "wwan"
+
+enum {
+ /* ACPI GWAN/SWAN bits */
+ TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */
+ TP_ACPI_WANCARD_RADIOSSW = 0x02, /* Wan radio enabled */
+ TP_ACPI_WANCARD_UNK = 0x04, /* unknown function */
+};
+
+static int wan_init(struct ibm_init_struct *iibm);
+static int wan_get_radiosw(void);
+static int wan_set_radiosw(int radio_on);
+static int wan_read(char *p);
+static int wan_write(char *buf);
+
+
+#endif /* __THINKPAD_ACPI_H */
tristate "Gianfar Ethernet"
depends on 85xx || 83xx || PPC_86xx
select PHYLIB
+ select CRC32
help
This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
and MPC86xx family of chips, and the FEC on the 8540.
when the driver is receiving lots of packets from the card.
config CHELSIO_T3
- tristate "Chelsio Communications T3 10Gb Ethernet support"
- depends on PCI
- help
- This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
- adapters.
+ tristate "Chelsio Communications T3 10Gb Ethernet support"
+ depends on PCI
+ select FW_LOADER
+ help
+ This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+ adapters.
- For general information about Chelsio and our products, visit
- our website at <http://www.chelsio.com>.
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
- For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.htm>.
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
- Please send feedback to <linux-bugs@chelsio.com>.
+ Please send feedback to <linux-bugs@chelsio.com>.
- To compile this driver as a module, choose M here: the module
- will be called cxgb3.
+ To compile this driver as a module, choose M here: the module
+ will be called cxgb3.
config EHEA
tristate "eHEA Ethernet support"
int i;
crc32 = ether_crc_le(6, mc_addr);
- crc32 = ~crc32;
for (i = 0; i < 32; i++)
value |= (((crc32 >> i) & 1) << (31 - i));
return;
adapter = netdev_priv(netdev);
+
+ /* Some atl1 boards lack persistent storage for their MAC, and get it
+ * from the BIOS during POST. If we've been messing with the MAC
+ * address, we need to save the permanent one.
+ */
+ if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) {
+ memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN);
+ atl1_set_mac_addr(&adapter->hw);
+ }
+
iowrite16(0, adapter->hw.hw_addr + REG_GPHY_ENABLE);
unregister_netdev(netdev);
pci_iounmap(pdev, adapter->hw.hw_addr);
bw32(bp, B44_RXCONFIG, val);
} else {
unsigned char zero[6] = {0, 0, 0, 0, 0, 0};
- int i = 0;
+ int i = 1;
__b44_set_mac_addr(bp);
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.5.5"
-#define DRV_MODULE_RELDATE "February 1, 2007"
+#define DRV_MODULE_VERSION "1.5.8"
+#define DRV_MODULE_RELDATE "April 24, 2007"
#define RUN_AT(x) (jiffies + (x))
(sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons))
return 1;
- if (((sblk->status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) != 0) !=
- bp->link_up)
+ if ((sblk->status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) !=
+ (sblk->status_attn_bits_ack & STATUS_ATTN_BITS_LINK_STATE))
return 1;
return 0;
if ((align_start = (offset32 & 3))) {
offset32 &= ~3;
- len32 += (4 - align_start);
+ len32 += align_start;
+ if (len32 < 4)
+ len32 = 4;
if ((rc = bnx2_nvram_read(bp, offset32, start, 4)))
return rc;
}
if (len32 & 3) {
- if ((len32 > 4) || !align_start) {
- align_end = 4 - (len32 & 3);
- len32 += align_end;
- if ((rc = bnx2_nvram_read(bp, offset32 + len32 - 4,
- end, 4))) {
- return rc;
- }
- }
+ align_end = 4 - (len32 & 3);
+ len32 += align_end;
+ if ((rc = bnx2_nvram_read(bp, offset32 + len32 - 4, end, 4)))
+ return rc;
}
if (align_start || align_end) {
if ((rc = bnx2_enable_nvram_write(bp)) != 0)
goto nvram_write_end;
- /* Erase the page */
- if ((rc = bnx2_nvram_erase_page(bp, page_start)) != 0)
- goto nvram_write_end;
-
- /* Re-enable the write again for the actual write */
- bnx2_enable_nvram_write(bp);
-
/* Loop to write back the buffer data from page_start to
* data_start */
i = 0;
if (bp->flash_info->buffered == 0) {
+ /* Erase the page */
+ if ((rc = bnx2_nvram_erase_page(bp, page_start)) != 0)
+ goto nvram_write_end;
+
+ /* Re-enable the write again for the actual write */
+ bnx2_enable_nvram_write(bp);
+
for (addr = page_start; addr < data_start;
addr += 4, i += 4) {
val = REG_RD(bp, BNX2_MQ_CONFIG);
val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
+ if (CHIP_ID(bp) == CHIP_ID_5709_A0 || CHIP_ID(bp) == CHIP_ID_5709_A1)
+ val |= BNX2_MQ_CONFIG_HALT_DIS;
+
REG_WR(bp, BNX2_MQ_CONFIG, val);
val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE);
#define CHIP_ID_5708_B0 0x57081000
#define CHIP_ID_5708_B1 0x57081010
#define CHIP_ID_5709_A0 0x57090000
+#define CHIP_ID_5709_A1 0x57090010
#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf)
};
enum {
- SUPPORTED_OFFLOAD = 1 << 24,
- SUPPORTED_IRQ = 1 << 25
+ SUPPORTED_IRQ = 1 << 24
};
enum { /* adapter interrupt-maintained statistics */
unsigned long serdes_signal_loss;
unsigned long xaui_pcs_ctc_err;
unsigned long xaui_pcs_align_change;
+
+ unsigned long num_toggled; /* # times toggled TxEn due to stuck TX */
+ unsigned long num_resets; /* # times reset due to stuck TX */
+
};
struct tp_mib_stats {
MC5_MODE_72_BIT = 2
};
+/* MC5 min active region size */
+enum { MC5_MIN_TIDS = 16 };
+
struct vpd_params {
unsigned int cclk;
unsigned int mclk;
unsigned int stats_update_period; /* MAC stats accumulation period */
unsigned int linkpoll_period; /* link poll period in 0.1s */
unsigned int rev; /* chip revision */
+ unsigned int offload;
+};
+
+enum { /* chip revisions */
+ T3_REV_A = 0,
+ T3_REV_B = 2,
+ T3_REV_B2 = 3,
};
struct trace_params {
struct adapter *adapter;
unsigned int offset;
unsigned int nucast; /* # of address filters for unicast MACs */
+ unsigned int tx_tcnt;
+ unsigned int tx_xcnt;
+ u64 tx_mcnt;
+ unsigned int rx_xcnt;
+ u64 rx_mcnt;
+ unsigned int toggle_cnt;
+ unsigned int txen;
struct mac_stats stats;
};
static inline int is_offload(const struct adapter *adap)
{
- return adapter_info(adap)->caps & SUPPORTED_OFFLOAD;
+ return adap->params.offload;
}
static inline unsigned int core_ticks_per_usec(const struct adapter *adap)
int t3_mac_set_num_ucast(struct cmac *mac, int n);
const struct mac_stats *t3_mac_update_stats(struct cmac *mac);
int t3_mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, int fc);
+int t3b2_mac_watchdog_task(struct cmac *mac);
void t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode);
int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
static inline struct t3c_tid_entry *lookup_tid(const struct tid_info *t,
unsigned int tid)
{
- return tid < t->ntids ? &(t->tid_tab[tid]) : NULL;
+ struct t3c_tid_entry *t3c_tid = tid < t->ntids ?
+ &(t->tid_tab[tid]) : NULL;
+
+ return (t3c_tid && t3c_tid->client) ? t3c_tid : NULL;
}
/*
#include <linux/workqueue.h>
#include <linux/proc_fs.h>
#include <linux/rtnetlink.h>
+#include <linux/firmware.h>
#include <asm/uaccess.h>
#include "common.h"
int speed, int duplex, int pause)
{
struct net_device *dev = adapter->port[port_id];
+ struct port_info *pi = netdev_priv(dev);
+ struct cmac *mac = &pi->mac;
/* Skip changes from disabled ports. */
if (!netif_running(dev))
return;
if (link_stat != netif_carrier_ok(dev)) {
- if (link_stat)
+ if (link_stat) {
+ t3_mac_enable(mac, MAC_DIRECTION_RX);
netif_carrier_on(dev);
- else
+ } else {
netif_carrier_off(dev);
+ pi->phy.ops->power_down(&pi->phy, 1);
+ t3_mac_disable(mac, MAC_DIRECTION_RX);
+ t3_link_start(&pi->phy, mac, &pi->link_config);
+ }
+
link_report(dev);
}
}
static int setup_sge_qsets(struct adapter *adap)
{
int i, j, err, irq_idx = 0, qset_idx = 0, dummy_dev_idx = 0;
- unsigned int ntxq = is_offload(adap) ? SGE_TXQ_PER_SET : 1;
+ unsigned int ntxq = SGE_TXQ_PER_SET;
if (adap->params.rev > 0 && !(adap->flags & USING_MSI))
irq_idx = -1;
static ssize_t set_nfilters(struct net_device *dev, unsigned int val)
{
struct adapter *adap = dev->priv;
+ int min_tids = is_offload(adap) ? MC5_MIN_TIDS : 0;
if (adap->flags & FULL_INIT_DONE)
return -EBUSY;
if (val && adap->params.rev == 0)
return -EINVAL;
- if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers)
+ if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers -
+ min_tids)
return -EINVAL;
adap->params.mc5.nfilters = val;
return 0;
if (adap->flags & FULL_INIT_DONE)
return -EBUSY;
- if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nfilters)
+ if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nfilters -
+ MC5_MIN_TIDS)
return -EINVAL;
adap->params.mc5.nservers = val;
return 0;
}
}
+#define FW_FNAME "t3fw-%d.%d.%d.bin"
+
+static int upgrade_fw(struct adapter *adap)
+{
+ int ret;
+ char buf[64];
+ const struct firmware *fw;
+ struct device *dev = &adap->pdev->dev;
+
+ snprintf(buf, sizeof(buf), FW_FNAME, FW_VERSION_MAJOR,
+ FW_VERSION_MINOR, FW_VERSION_MICRO);
+ ret = request_firmware(&fw, buf, dev);
+ if (ret < 0) {
+ dev_err(dev, "could not upgrade firmware: unable to load %s\n",
+ buf);
+ return ret;
+ }
+ ret = t3_load_fw(adap, fw->data, fw->size);
+ release_firmware(fw);
+ return ret;
+}
+
/**
* cxgb_up - enable the adapter
* @adapter: adapter being enabled
if (!(adap->flags & FULL_INIT_DONE)) {
err = t3_check_fw_version(adap);
+ if (err == -EINVAL)
+ err = upgrade_fw(adap);
if (err)
goto out;
if (err)
goto out;
+ t3_write_reg(adap, A_ULPRX_TDDP_PSZ, V_HPZ0(PAGE_SHIFT - 12));
+
err = setup_sge_qsets(adap);
if (err)
goto out;
return err;
set_bit(pi->port_id, &adapter->open_device_map);
- if (!ofld_disable) {
+ if (is_offload(adapter) && !ofld_disable) {
err = offload_open(dev);
if (err)
printk(KERN_WARNING
"VLANinsertions ",
"TxCsumOffload ",
"RxCsumGood ",
- "RxDrops "
+ "RxDrops ",
+
+ "CheckTXEnToggled ",
+ "CheckResets ",
+
};
static int get_stats_count(struct net_device *dev)
*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TX_CSUM);
*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_RX_CSUM_GOOD);
*data++ = s->rx_cong_drops;
+
+ *data++ = s->num_toggled;
+ *data++ = s->num_resets;
}
static inline void reg_block_dump(struct adapter *ap, void *buf,
static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
{
- struct adapter *adapter = dev->priv;
+ const struct adapter *adapter = dev->priv;
+ const struct port_info *pi = netdev_priv(dev);
+ const struct qset_params *q = &adapter->params.sge.qset[pi->first_qset];
e->rx_max_pending = MAX_RX_BUFFERS;
e->rx_mini_max_pending = 0;
e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS;
e->tx_max_pending = MAX_TXQ_ENTRIES;
- e->rx_pending = adapter->params.sge.qset[0].fl_size;
- e->rx_mini_pending = adapter->params.sge.qset[0].rspq_size;
- e->rx_jumbo_pending = adapter->params.sge.qset[0].jumbo_size;
- e->tx_pending = adapter->params.sge.qset[0].txq_size[0];
+ e->rx_pending = q->fl_size;
+ e->rx_mini_pending = q->rspq_size;
+ e->rx_jumbo_pending = q->jumbo_size;
+ e->tx_pending = q->txq_size[0];
}
static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
{
int i;
+ struct qset_params *q;
struct adapter *adapter = dev->priv;
+ const struct port_info *pi = netdev_priv(dev);
if (e->rx_pending > MAX_RX_BUFFERS ||
e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS ||
if (adapter->flags & FULL_INIT_DONE)
return -EBUSY;
- for (i = 0; i < SGE_QSETS; ++i) {
- struct qset_params *q = &adapter->params.sge.qset[i];
-
+ q = &adapter->params.sge.qset[pi->first_qset];
+ for (i = 0; i < pi->nqsets; ++i, ++q) {
q->rspq_size = e->rx_mini_pending;
q->fl_size = e->rx_pending;
q->jumbo_size = e->rx_jumbo_pending;
}
}
+static void check_t3b2_mac(struct adapter *adapter)
+{
+ int i;
+
+ if (!rtnl_trylock()) /* synchronize with ifdown */
+ return;
+
+ for_each_port(adapter, i) {
+ struct net_device *dev = adapter->port[i];
+ struct port_info *p = netdev_priv(dev);
+ int status;
+
+ if (!netif_running(dev))
+ continue;
+
+ status = 0;
+ if (netif_running(dev) && netif_carrier_ok(dev))
+ status = t3b2_mac_watchdog_task(&p->mac);
+ if (status == 1)
+ p->mac.stats.num_toggled++;
+ else if (status == 2) {
+ struct cmac *mac = &p->mac;
+
+ t3_mac_set_mtu(mac, dev->mtu);
+ t3_mac_set_address(mac, 0, dev->dev_addr);
+ cxgb_set_rxmode(dev);
+ t3_link_start(&p->phy, mac, &p->link_config);
+ t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+ t3_port_intr_enable(adapter, p->port_id);
+ p->mac.stats.num_resets++;
+ }
+ }
+ rtnl_unlock();
+}
+
+
static void t3_adap_check_task(struct work_struct *work)
{
struct adapter *adapter = container_of(work, struct adapter,
adapter->check_task_cnt = 0;
}
+ if (p->rev == T3_REV_B2)
+ check_t3b2_mac(adapter);
+
/* Schedule the next check update if any port is active. */
spin_lock(&adapter->work_lock);
if (adapter->open_device_map & PORT_MASK)
if (!test_bit(i, &adap->registered_device_map))
continue;
- printk(KERN_INFO "%s: %s %s RNIC (rev %d) %s%s\n",
+ printk(KERN_INFO "%s: %s %s %sNIC (rev %d) %s%s\n",
dev->name, ai->desc, pi->port_type->desc,
- adap->params.rev, buf,
+ is_offload(adap) ? "R" : "", adap->params.rev, buf,
(adap->flags & USING_MSIX) ? " MSI-X" :
(adap->flags & USING_MSI) ? " MSI" : "");
if (adap->name == dev->name && adap->params.vpd.mclk)
spin_lock_bh(&td->tid_release_lock);
p->ctx = (void *)td->tid_release_list;
+ p->client = NULL;
td->tid_release_list = p;
if (!p->ctx)
schedule_work(&td->tid_release_task);
struct tid_info *t = &(T3C_DATA(tdev))->tid_maps;
spin_lock_bh(&t->atid_lock);
- if (t->afree) {
+ if (t->afree &&
+ t->atids_in_use + atomic_read(&t->tids_in_use) + MC5_MIN_TIDS <=
+ t->ntids) {
union active_open_entry *p = t->afree;
atid = (p - t->atid_tab) + t->atid_base;
struct t3c_tid_entry *t3c_tid;
t3c_tid = lookup_atid(&(T3C_DATA(dev))->tid_maps, atid);
- if (t3c_tid->ctx && t3c_tid->client && t3c_tid->client->handlers &&
+ if (t3c_tid && t3c_tid->ctx && t3c_tid->client &&
+ t3c_tid->client->handlers &&
t3c_tid->client->handlers[CPL_ACT_OPEN_RPL]) {
return t3c_tid->client->handlers[CPL_ACT_OPEN_RPL] (dev, skb,
t3c_tid->
struct t3c_tid_entry *t3c_tid;
t3c_tid = lookup_stid(&(T3C_DATA(dev))->tid_maps, stid);
- if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers &&
t3c_tid->client->handlers[p->opcode]) {
return t3c_tid->client->handlers[p->opcode] (dev, skb,
t3c_tid->ctx);
struct t3c_tid_entry *t3c_tid;
t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid);
- if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers &&
t3c_tid->client->handlers[p->opcode]) {
return t3c_tid->client->handlers[p->opcode]
(dev, skb, t3c_tid->ctx);
}
}
+/*
+ * Returns an sk_buff for a reply CPL message of size len. If the input
+ * sk_buff has no other users it is trimmed and reused, otherwise a new buffer
+ * is allocated. The input skb must be of size at least len. Note that this
+ * operation does not destroy the original skb data even if it decides to reuse
+ * the buffer.
+ */
+static struct sk_buff *cxgb3_get_cpl_reply_skb(struct sk_buff *skb, size_t len,
+ int gfp)
+{
+ if (likely(!skb_cloned(skb))) {
+ BUG_ON(skb->len < len);
+ __skb_trim(skb, len);
+ skb_get(skb);
+ } else {
+ skb = alloc_skb(len, gfp);
+ if (skb)
+ __skb_put(skb, len);
+ }
+ return skb;
+}
+
static int do_abort_req_rss(struct t3cdev *dev, struct sk_buff *skb)
{
union opcode_tid *p = cplhdr(skb);
struct t3c_tid_entry *t3c_tid;
t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid);
- if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers &&
t3c_tid->client->handlers[p->opcode]) {
return t3c_tid->client->handlers[p->opcode]
(dev, skb, t3c_tid->ctx);
} else {
struct cpl_abort_req_rss *req = cplhdr(skb);
struct cpl_abort_rpl *rpl;
+ struct sk_buff *reply_skb;
+ unsigned int tid = GET_TID(req);
+ u8 cmd = req->status;
+
+ if (req->status == CPL_ERR_RTX_NEG_ADVICE ||
+ req->status == CPL_ERR_PERSIST_NEG_ADVICE)
+ goto out;
- struct sk_buff *skb =
- alloc_skb(sizeof(struct cpl_abort_rpl), GFP_ATOMIC);
- if (!skb) {
+ reply_skb = cxgb3_get_cpl_reply_skb(skb,
+ sizeof(struct
+ cpl_abort_rpl),
+ GFP_ATOMIC);
+
+ if (!reply_skb) {
printk("do_abort_req_rss: couldn't get skb!\n");
goto out;
}
- skb->priority = CPL_PRIORITY_DATA;
- __skb_put(skb, sizeof(struct cpl_abort_rpl));
- rpl = cplhdr(skb);
+ reply_skb->priority = CPL_PRIORITY_DATA;
+ __skb_put(reply_skb, sizeof(struct cpl_abort_rpl));
+ rpl = cplhdr(reply_skb);
rpl->wr.wr_hi =
htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL));
- rpl->wr.wr_lo = htonl(V_WR_TID(GET_TID(req)));
- OPCODE_TID(rpl) =
- htonl(MK_OPCODE_TID(CPL_ABORT_RPL, GET_TID(req)));
- rpl->cmd = req->status;
- cxgb3_ofld_send(dev, skb);
+ rpl->wr.wr_lo = htonl(V_WR_TID(tid));
+ OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, tid));
+ rpl->cmd = cmd;
+ cxgb3_ofld_send(dev, reply_skb);
out:
return CPL_RET_BUF_DONE;
}
struct t3c_tid_entry *t3c_tid;
t3c_tid = lookup_atid(&(T3C_DATA(dev))->tid_maps, atid);
- if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers &&
t3c_tid->client->handlers[CPL_ACT_ESTABLISH]) {
return t3c_tid->client->handlers[CPL_ACT_ESTABLISH]
(dev, skb, t3c_tid->ctx);
}
}
-static int do_set_tcb_rpl(struct t3cdev *dev, struct sk_buff *skb)
-{
- struct cpl_set_tcb_rpl *rpl = cplhdr(skb);
-
- if (rpl->status != CPL_ERR_NONE)
- printk(KERN_ERR
- "Unexpected SET_TCB_RPL status %u for tid %u\n",
- rpl->status, GET_TID(rpl));
- return CPL_RET_BUF_DONE;
-}
-
static int do_trace(struct t3cdev *dev, struct sk_buff *skb)
{
struct cpl_trace_pkt *p = cplhdr(skb);
struct t3c_tid_entry *t3c_tid;
t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid);
- if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ if (t3c_tid && t3c_tid->ctx && t3c_tid->client->handlers &&
t3c_tid->client->handlers[opcode]) {
return t3c_tid->client->handlers[opcode] (dev, skb,
t3c_tid->ctx);
for (tid = 0; tid < ti->ntids; tid++) {
te = lookup_tid(ti, tid);
BUG_ON(!te);
- if (te->ctx && te->client && te->client->redirect) {
+ if (te && te->ctx && te->client && te->client->redirect) {
update_tcb = te->client->redirect(te->ctx, old, new, e);
if (update_tcb) {
l2t_hold(L2DATA(tdev), e);
t3_register_cpl_handler(CPL_CLOSE_CON_RPL, do_hwtid_rpl);
t3_register_cpl_handler(CPL_ABORT_REQ_RSS, do_abort_req_rss);
t3_register_cpl_handler(CPL_ACT_ESTABLISH, do_act_establish);
- t3_register_cpl_handler(CPL_SET_TCB_RPL, do_set_tcb_rpl);
+ t3_register_cpl_handler(CPL_SET_TCB_RPL, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_GET_TCB_RPL, do_hwtid_rpl);
t3_register_cpl_handler(CPL_RDMA_TERMINATE, do_term);
t3_register_cpl_handler(CPL_RDMA_EC_STATUS, do_hwtid_rpl);
t3_register_cpl_handler(CPL_TRACE_PKT, do_trace);
unsigned int tcam_size = mc5->tcam_size;
struct adapter *adap = mc5->adapter;
+ if (!tcam_size)
+ return 0;
+
if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size)
return -EINVAL;
#define A_TP_RX_TRC_KEY0 0x120
+#define A_TP_TX_DROP_CNT_CH0 0x12d
+
+#define S_TXDROPCNTCH0RCVD 0
+#define M_TXDROPCNTCH0RCVD 0xffff
+#define V_TXDROPCNTCH0RCVD(x) ((x) << S_TXDROPCNTCH0RCVD)
+#define G_TXDROPCNTCH0RCVD(x) (((x) >> S_TXDROPCNTCH0RCVD) & \
+ M_TXDROPCNTCH0RCVD)
+
#define A_ULPRX_CTL 0x500
#define S_ROUND_ROBIN 4
#define A_ULPRX_ISCSI_TAGMASK 0x514
+#define S_HPZ0 0
+#define M_HPZ0 0xf
+#define V_HPZ0(x) ((x) << S_HPZ0)
+#define G_HPZ0(x) (((x) >> S_HPZ0) & M_HPZ0)
+
#define A_ULPRX_TDDP_LLIMIT 0x51c
#define A_ULPRX_TDDP_ULIMIT 0x520
+#define A_ULPRX_TDDP_PSZ 0x528
#define A_ULPRX_STAG_LLIMIT 0x52c
#define V_TXPAUSEEN(x) ((x) << S_TXPAUSEEN)
#define F_TXPAUSEEN V_TXPAUSEEN(1U)
+#define A_XGM_TX_PAUSE_QUANTA 0x808
+
#define A_XGM_RX_CTRL 0x80c
#define S_RXEN 0
#define A_XGM_TXFIFO_CFG 0x888
+#define S_TXIPG 13
+#define M_TXIPG 0xff
+#define V_TXIPG(x) ((x) << S_TXIPG)
+#define G_TXIPG(x) (((x) >> S_TXIPG) & M_TXIPG)
+
#define S_TXFIFOTHRESH 4
#define M_TXFIFOTHRESH 0x1ff
#define V_TXFIFOTHRESH(x) ((x) << S_TXFIFOTHRESH)
+#define S_ENDROPPKT 21
+#define V_ENDROPPKT(x) ((x) << S_ENDROPPKT)
+#define F_ENDROPPKT V_ENDROPPKT(1U)
+
#define A_XGM_SERDES_CTRL 0x890
#define A_XGM_SERDES_CTRL0 0x8e0
#define A_XGM_RX_MAX_PKT_SIZE_ERR_CNT 0x9a4
+#define A_XGM_TX_SPI4_SOP_EOP_CNT 0x9a8
+
+#define S_TXSPI4SOPCNT 16
+#define M_TXSPI4SOPCNT 0xffff
+#define V_TXSPI4SOPCNT(x) ((x) << S_TXSPI4SOPCNT)
+#define G_TXSPI4SOPCNT(x) (((x) >> S_TXSPI4SOPCNT) & M_TXSPI4SOPCNT)
+
#define A_XGM_RX_SPI4_SOP_EOP_CNT 0x9ac
#define XGMAC0_1_BASE_ADDR 0xa00
q->txq[TXQ_ETH].stop_thres = nports *
flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
- if (ntxq == 1) {
+ if (!is_offload(adapter)) {
#ifdef USE_RX_PAGE
q->fl[0].buf_size = RX_PAGE_SIZE;
#else
{2, 0, 0, 0,
F_GPIO2_OEN | F_GPIO4_OEN |
F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
- SUPPORTED_OFFLOAD,
+ 0,
&mi1_mdio_ops, "Chelsio PE9000"},
{2, 0, 0, 0,
F_GPIO2_OEN | F_GPIO4_OEN |
F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
- SUPPORTED_OFFLOAD,
+ 0,
&mi1_mdio_ops, "Chelsio T302"},
{1, 0, 0, 0,
F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN |
F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
- SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_OFFLOAD,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
&mi1_mdio_ext_ops, "Chelsio T310"},
{2, 0, 0, 0,
F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN |
F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL |
F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
- SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_OFFLOAD,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
&mi1_mdio_ext_ops, "Chelsio T320"},
};
SF_ERASE_SECTOR = 0xd8, /* erase sector */
FW_FLASH_BOOT_ADDR = 0x70000, /* start address of FW in flash */
- FW_VERS_ADDR = 0x77ffc /* flash address holding FW version */
+ FW_VERS_ADDR = 0x77ffc, /* flash address holding FW version */
+ FW_MIN_SIZE = 8 /* at least version and csum */
};
/**
const u32 *p = (const u32 *)fw_data;
int ret, addr, fw_sector = FW_FLASH_BOOT_ADDR >> 16;
- if (size & 3)
+ if ((size & 3) || size < FW_MIN_SIZE)
return -EINVAL;
if (size > FW_VERS_ADDR + 8 - FW_FLASH_BOOT_ADDR)
return -EFBIG;
*/
int t3_phy_intr_handler(struct adapter *adapter)
{
- static const int intr_gpio_bits[] = { 8, 0x20 };
-
+ u32 mask, gpi = adapter_info(adapter)->gpio_intr;
u32 i, cause = t3_read_reg(adapter, A_T3DBG_INT_CAUSE);
for_each_port(adapter, i) {
- if (cause & intr_gpio_bits[i]) {
- struct cphy *phy = &adap2pinfo(adapter, i)->phy;
- int phy_cause = phy->ops->intr_handler(phy);
+ struct port_info *p = adap2pinfo(adapter, i);
+
+ mask = gpi - (gpi & (gpi - 1));
+ gpi -= mask;
+
+ if (!(p->port_type->caps & SUPPORTED_IRQ))
+ continue;
+
+ if (cause & mask) {
+ int phy_cause = p->phy.ops->intr_handler(&p->phy);
if (phy_cause & cphy_cause_link_change)
t3_link_changed(adapter, i);
if (phy_cause & cphy_cause_fifo_error)
- phy->fifo_errors++;
+ p->phy.fifo_errors++;
}
}
struct adapter *adapter = mc7->adapter;
const struct mc7_timing_params *p = &mc7_timings[mem_type];
+ if (!mc7->size)
+ return 0;
+
val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG);
slow = val & F_SLOW;
width = G_WIDTH(val);
do { /* wait for uP to initialize */
msleep(20);
} while (t3_read_reg(adapter, A_CIM_HOST_ACC_DATA) && --attempts);
- if (!attempts)
+ if (!attempts) {
+ CH_ERR(adapter, "uP initialization timed out\n");
goto out_err;
+ }
err = 0;
out_err:
mc7->name = name;
mc7->offset = base_addr - MC7_PMRX_BASE_ADDR;
cfg = t3_read_reg(adapter, mc7->offset + A_MC7_CFG);
- mc7->size = mc7_calc_size(cfg);
+ mc7->size = mc7->size = G_DEN(cfg) == M_DEN ? 0 : mc7_calc_size(cfg);
mc7->width = G_WIDTH(cfg);
}
V_I2C_CLKDIV(adapter->params.vpd.cclk / 80 - 1));
t3_write_reg(adapter, A_T3DBG_GPIO_EN,
ai->gpio_out | F_GPIO0_OEN | F_GPIO0_OUT_VAL);
+ t3_write_reg(adapter, A_MC5_DB_SERVER_INDEX, 0);
if (adapter->params.rev == 0 || !uses_xaui(adapter))
val |= F_ENRGMII;
}
/*
- * Reset the adapter. PCIe cards lose their config space during reset, PCI-X
+ * Reset the adapter.
+ * Older PCIe cards lose their config space during reset, PCI-X
* ones don't.
*/
int t3_reset_adapter(struct adapter *adapter)
{
- int i;
+ int i, save_and_restore_pcie =
+ adapter->params.rev < T3_REV_B2 && is_pcie(adapter);
uint16_t devid = 0;
- if (is_pcie(adapter))
+ if (save_and_restore_pcie)
pci_save_state(adapter->pdev);
t3_write_reg(adapter, A_PL_RST, F_CRSTWRM | F_CRSTWRMMODE);
if (devid != 0x1425)
return -1;
- if (is_pcie(adapter))
+ if (save_and_restore_pcie)
pci_restore_state(adapter->pdev);
return 0;
}
p->tx_num_pgs = pm_num_pages(p->chan_tx_size, p->tx_pg_size);
p->ntimer_qs = p->cm_size >= (128 << 20) ||
adapter->params.rev > 0 ? 12 : 6;
+ }
+
+ adapter->params.offload = t3_mc7_size(&adapter->pmrx) &&
+ t3_mc7_size(&adapter->pmtx) &&
+ t3_mc7_size(&adapter->cm);
+ if (is_offload(adapter)) {
adapter->params.mc5.nservers = DEFAULT_NSERVERS;
adapter->params.mc5.nfilters = adapter->params.rev > 0 ?
DEFAULT_NFILTERS : 0;
#define DRV_NAME "cxgb3"
/* Driver version */
#define DRV_VERSION "1.0-ko"
+
+/* Firmware version */
#define FW_VERSION_MAJOR 3
-#define FW_VERSION_MINOR 2
+#define FW_VERSION_MINOR 3
+#define FW_VERSION_MICRO 0
#endif /* __CHELSIO_VERSION_H */
xaui_serdes_reset(mac);
}
- if (adap->params.rev > 0)
- t3_write_reg(adap, A_XGM_PAUSE_TIMER + oft, 0xf000);
-
val = F_MAC_RESET_;
if (is_10G(adap))
val |= F_PCS_RESET_;
return 0;
}
+int t3b2_mac_reset(struct cmac *mac)
+{
+ struct adapter *adap = mac->adapter;
+ unsigned int oft = mac->offset;
+ u32 val;
+
+ if (!macidx(mac))
+ t3_set_reg_field(adap, A_MPS_CFG, F_PORT0ACTIVE, 0);
+ else
+ t3_set_reg_field(adap, A_MPS_CFG, F_PORT1ACTIVE, 0);
+
+ t3_write_reg(adap, A_XGM_RESET_CTRL + oft, F_MAC_RESET_);
+ t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */
+
+ msleep(10);
+
+ /* Check for xgm Rx fifo empty */
+ if (t3_wait_op_done(adap, A_XGM_RX_MAX_PKT_SIZE_ERR_CNT + oft,
+ 0x80000000, 1, 5, 2)) {
+ CH_ERR(adap, "MAC %d Rx fifo drain failed\n",
+ macidx(mac));
+ return -1;
+ }
+
+ t3_write_reg(adap, A_XGM_RESET_CTRL + oft, 0);
+ t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */
+
+ val = F_MAC_RESET_;
+ if (is_10G(adap))
+ val |= F_PCS_RESET_;
+ else if (uses_xaui(adap))
+ val |= F_PCS_RESET_ | F_XG2G_RESET_;
+ else
+ val |= F_RGMII_RESET_ | F_XG2G_RESET_;
+ t3_write_reg(adap, A_XGM_RESET_CTRL + oft, val);
+ t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */
+ if ((val & F_PCS_RESET_) && adap->params.rev) {
+ msleep(1);
+ t3b_pcs_reset(mac);
+ }
+ t3_write_reg(adap, A_XGM_RX_CFG + oft,
+ F_DISPAUSEFRAMES | F_EN1536BFRAMES |
+ F_RMFCS | F_ENJUMBO | F_ENHASHMCAST);
+
+ if (!macidx(mac))
+ t3_set_reg_field(adap, A_MPS_CFG, 0, F_PORT0ACTIVE);
+ else
+ t3_set_reg_field(adap, A_MPS_CFG, 0, F_PORT1ACTIVE);
+
+ return 0;
+}
+
/*
* Set the exact match register 'idx' to recognize the given Ethernet address.
*/
* Adjust the PAUSE frame watermarks. We always set the LWM, and the
* HWM only if flow-control is enabled.
*/
- hwm = max(MAC_RXFIFO_SIZE - 3 * mtu, MAC_RXFIFO_SIZE / 2U);
- hwm = min(hwm, 3 * MAC_RXFIFO_SIZE / 4 + 1024);
- lwm = hwm - 1024;
+ hwm = max_t(unsigned int, MAC_RXFIFO_SIZE - 3 * mtu,
+ MAC_RXFIFO_SIZE * 38 / 100);
+ hwm = min(hwm, MAC_RXFIFO_SIZE - 8192);
+ lwm = min(3 * (int)mtu, MAC_RXFIFO_SIZE / 4);
+
v = t3_read_reg(adap, A_XGM_RXFIFO_CFG + mac->offset);
v &= ~V_RXFIFOPAUSELWM(M_RXFIFOPAUSELWM);
v |= V_RXFIFOPAUSELWM(lwm / 8);
thres = mtu > thres ? (mtu - thres + 7) / 8 : 0;
thres = max(thres, 8U); /* need at least 8 */
t3_set_reg_field(adap, A_XGM_TXFIFO_CFG + mac->offset,
- V_TXFIFOTHRESH(M_TXFIFOTHRESH), V_TXFIFOTHRESH(thres));
+ V_TXFIFOTHRESH(M_TXFIFOTHRESH) | V_TXIPG(M_TXIPG),
+ V_TXFIFOTHRESH(thres) | V_TXIPG(1));
+
+ if (adap->params.rev > 0)
+ t3_write_reg(adap, A_XGM_PAUSE_TIMER + mac->offset,
+ (hwm - lwm) * 4 / 8);
+ t3_write_reg(adap, A_XGM_TX_PAUSE_QUANTA + mac->offset,
+ MAC_RXFIFO_SIZE * 4 * 8 / 512);
+
return 0;
}
V_PORTSPEED(M_PORTSPEED), val);
}
- val = t3_read_reg(adap, A_XGM_RXFIFO_CFG + oft);
- val &= ~V_RXFIFOPAUSEHWM(M_RXFIFOPAUSEHWM);
- if (fc & PAUSE_TX)
- val |= V_RXFIFOPAUSEHWM(G_RXFIFOPAUSELWM(val) + 128); /* +1KB */
- t3_write_reg(adap, A_XGM_RXFIFO_CFG + oft, val);
-
t3_set_reg_field(adap, A_XGM_TX_CFG + oft, F_TXPAUSEEN,
(fc & PAUSE_RX) ? F_TXPAUSEEN : 0);
return 0;
int idx = macidx(mac);
struct adapter *adap = mac->adapter;
unsigned int oft = mac->offset;
-
+ struct mac_stats *s = &mac->stats;
+
if (which & MAC_DIRECTION_TX) {
t3_write_reg(adap, A_XGM_TX_CTRL + oft, F_TXEN);
t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx);
- t3_write_reg(adap, A_TP_PIO_DATA, 0xbf000001);
+ t3_write_reg(adap, A_TP_PIO_DATA, 0xc0ede401);
t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_MODE);
t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx);
+
+ t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CNT_CH0 + idx);
+ mac->tx_mcnt = s->tx_frames;
+ mac->tx_tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap,
+ A_TP_PIO_DATA)));
+ mac->tx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
+ A_XGM_TX_SPI4_SOP_EOP_CNT +
+ oft)));
+ mac->rx_mcnt = s->rx_frames;
+ mac->rx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
+ A_XGM_RX_SPI4_SOP_EOP_CNT +
+ oft)));
+ mac->txen = F_TXEN;
+ mac->toggle_cnt = 0;
}
if (which & MAC_DIRECTION_RX)
t3_write_reg(adap, A_XGM_RX_CTRL + oft, F_RXEN);
{
int idx = macidx(mac);
struct adapter *adap = mac->adapter;
+ int val;
if (which & MAC_DIRECTION_TX) {
t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx);
t3_write_reg(adap, A_TP_PIO_DATA, 0xc000001f);
t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_MODE);
- t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 0);
+ t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx);
+ mac->txen = 0;
}
- if (which & MAC_DIRECTION_RX)
+ if (which & MAC_DIRECTION_RX) {
+ t3_set_reg_field(mac->adapter, A_XGM_RESET_CTRL + mac->offset,
+ F_PCS_RESET_, 0);
+ msleep(100);
t3_write_reg(adap, A_XGM_RX_CTRL + mac->offset, 0);
+ val = F_MAC_RESET_;
+ if (is_10G(adap))
+ val |= F_PCS_RESET_;
+ else if (uses_xaui(adap))
+ val |= F_PCS_RESET_ | F_XG2G_RESET_;
+ else
+ val |= F_RGMII_RESET_ | F_XG2G_RESET_;
+ t3_write_reg(mac->adapter, A_XGM_RESET_CTRL + mac->offset, val);
+ }
return 0;
}
+int t3b2_mac_watchdog_task(struct cmac *mac)
+{
+ struct adapter *adap = mac->adapter;
+ struct mac_stats *s = &mac->stats;
+ unsigned int tx_tcnt, tx_xcnt;
+ unsigned int tx_mcnt = s->tx_frames;
+ unsigned int rx_mcnt = s->rx_frames;
+ unsigned int rx_xcnt;
+ int status;
+
+ if (tx_mcnt == mac->tx_mcnt) {
+ tx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
+ A_XGM_TX_SPI4_SOP_EOP_CNT +
+ mac->offset)));
+ if (tx_xcnt == 0) {
+ t3_write_reg(adap, A_TP_PIO_ADDR,
+ A_TP_TX_DROP_CNT_CH0 + macidx(mac));
+ tx_tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap,
+ A_TP_PIO_DATA)));
+ } else {
+ mac->toggle_cnt = 0;
+ return 0;
+ }
+ } else {
+ mac->toggle_cnt = 0;
+ return 0;
+ }
+
+ if (((tx_tcnt != mac->tx_tcnt) &&
+ (tx_xcnt == 0) && (mac->tx_xcnt == 0)) ||
+ ((mac->tx_mcnt == tx_mcnt) &&
+ (tx_xcnt != 0) && (mac->tx_xcnt != 0))) {
+ if (mac->toggle_cnt > 4)
+ status = 2;
+ else
+ status = 1;
+ } else {
+ mac->toggle_cnt = 0;
+ return 0;
+ }
+
+ if (rx_mcnt != mac->rx_mcnt)
+ rx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
+ A_XGM_RX_SPI4_SOP_EOP_CNT +
+ mac->offset)));
+ else
+ return 0;
+
+ if (mac->rx_mcnt != s->rx_frames && rx_xcnt == 0 && mac->rx_xcnt == 0)
+ status = 2;
+
+ mac->tx_tcnt = tx_tcnt;
+ mac->tx_xcnt = tx_xcnt;
+ mac->tx_mcnt = s->tx_frames;
+ mac->rx_xcnt = rx_xcnt;
+ mac->rx_mcnt = s->rx_frames;
+ if (status == 1) {
+ t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
+ t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset); /* flush */
+ t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, mac->txen);
+ t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset); /* flush */
+ mac->toggle_cnt++;
+ } else if (status == 2) {
+ t3b2_mac_reset(mac);
+ mac->toggle_cnt = 0;
+ }
+ return status;
+}
+
/*
* This function is called periodically to accumulate the current values of the
* RMON counters into the port statistics. Since the packet counters are only
RMON_UPDATE(mac, rx_symbol_errs, RX_SYM_CODE_ERR_FRAMES);
RMON_UPDATE(mac, rx_too_long, RX_OVERSIZE_FRAMES);
- mac->stats.rx_too_long += RMON_READ(mac, A_XGM_RX_MAX_PKT_SIZE_ERR_CNT);
+
+ v = RMON_READ(mac, A_XGM_RX_MAX_PKT_SIZE_ERR_CNT);
+ if (mac->adapter->params.rev == T3_REV_B2)
+ v &= 0x7fffffff;
+ mac->stats.rx_too_long += v;
RMON_UPDATE(mac, rx_frames_64, RX_64B_FRAMES);
RMON_UPDATE(mac, rx_frames_65_127, RX_65_127B_FRAMES);
depca_io_ports[i].device = pldev;
if (platform_device_add(pldev)) {
- platform_device_put(pldev);
depca_io_ports[i].device = NULL;
+ pldev->dev.platform_data = NULL;
+ platform_device_put(pldev);
continue;
}
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
- e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+ !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
if (likely(adapter->itr_setting & 3))
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
- e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+ !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
if (likely(adapter->itr_setting & 3))
poll_dev->quota -= work_done;
/* If no Tx and not enough Rx work done, exit the polling mode */
- if ((tx_cleaned && (work_done < work_to_do)) ||
+ if ((!tx_cleaned && (work_done == 0)) ||
!netif_running(poll_dev)) {
quit_polling:
if (likely(adapter->itr_setting & 3))
#ifdef CONFIG_E1000_NAPI
unsigned int count = 0;
#endif
- boolean_t cleaned = TRUE;
+ boolean_t cleaned = FALSE;
unsigned int total_tx_bytes=0, total_tx_packets=0;
i = tx_ring->next_to_clean;
#ifdef CONFIG_E1000_NAPI
#define E1000_TX_WEIGHT 64
/* weight of a sort for tx, to avoid endless transmit cleanup */
- if (count++ == E1000_TX_WEIGHT) {
- cleaned = FALSE;
- break;
- }
+ if (count++ == E1000_TX_WEIGHT) break;
#endif
}
icr &= 0x70;
outb(icr, EWRK3_ICR); /* Disable all the IRQs */
- if (nicsr == (CSR_TXD | CSR_RXD))
+ if (nicsr != (CSR_TXD | CSR_RXD))
return -ENXIO;
-
/* Check that the EEPROM is alive and well and not living on Pluto... */
for (chksum = 0, i = 0; i < EEPROM_MAX; i += 2) {
union {
nv_drain_tx(dev);
nv_init_tx(dev);
setup_hw_rings(dev, NV_SETUP_TX_RING);
- netif_wake_queue(dev);
}
+ netif_wake_queue(dev);
+
/* 4) restart tx engine */
nv_start_tx(dev);
spin_unlock_irq(&np->lock);
pci_push(base);
if (!using_multi_irqs(dev)) {
- nv_nic_irq(0, dev);
+ if (np->desc_ver == DESC_VER_3)
+ nv_nic_irq_optimized(0, dev);
+ else
+ nv_nic_irq(0, dev);
if (np->msi_flags & NV_MSI_X_ENABLED)
enable_irq_lockdep(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
else
#include <linux/ioport.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
#include <linux/jiffies.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
/* --------------------------------------------------------------------- */
#define BAYCOM_DEBUG
skb->tc_verd = SET_TC_NCLS(skb->tc_verd);
stats->tx_packets++;
stats->tx_bytes +=skb->len;
+
+ skb->dev = __dev_get_by_index(skb->iif);
+ if (!skb->dev) {
+ dev_kfree_skb(skb);
+ stats->tx_dropped++;
+ break;
+ }
+ skb->iif = _dev->ifindex;
+
if (from & AT_EGRESS) {
dp->st_rx_frm_egr++;
dev_queue_xmit(skb);
} else if (from & AT_INGRESS) {
-
dp->st_rx_frm_ing++;
+ skb_pull(skb, skb->dev->hard_header_len);
netif_rx(skb);
- } else {
- dev_kfree_skb(skb);
- stats->tx_dropped++;
- }
+ } else
+ BUG();
}
if (netif_tx_trylock(_dev)) {
stats->rx_packets++;
stats->rx_bytes+=skb->len;
- if (!from || !skb->input_dev) {
-dropped:
+ if (!(from & (AT_INGRESS|AT_EGRESS)) || !skb->iif) {
dev_kfree_skb(skb);
stats->rx_dropped++;
return ret;
- } else {
- /*
- * note we could be going
- * ingress -> egress or
- * egress -> ingress
- */
- skb->dev = skb->input_dev;
- skb->input_dev = dev;
- if (from & AT_INGRESS) {
- skb_pull(skb, skb->dev->hard_header_len);
- } else {
- if (!(from & AT_EGRESS)) {
- goto dropped;
- }
- }
}
if (skb_queue_len(&dp->rq) >= dev->tx_queue_len) {
if (ret < 0)
break;
+
+ mdelay(10);
}
kfree(patch_block);
pxa_irda_set_speed(si, si->newspeed);
si->newspeed = 0;
} else {
+ int i = 64;
+
ICCR0 = 0;
pxa_irda_fir_dma_rx_start(si);
+ while ((ICSR1 & ICSR1_RNE) && i--)
+ (void)ICDR;
ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+ if (i < 0)
+ printk(KERN_ERR "pxa_ir: cannot clear Rx FIFO!\n");
}
netif_wake_queue(dev);
}
/* EIF(Error in FIFO/End in Frame) handler for FIR */
-static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev)
+static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev, int icsr0)
{
unsigned int len, stat, data;
}
if (stat & ICSR1_ROR) {
printk(KERN_DEBUG "pxa_ir: fir receive overrun\n");
- si->stats.rx_frame_errors++;
+ si->stats.rx_over_errors++;
}
} else {
si->dma_rx_buff[len++] = data;
if (stat & ICSR1_EOF) {
/* end of frame. */
- struct sk_buff *skb = alloc_skb(len+1,GFP_ATOMIC);
+ struct sk_buff *skb;
+
+ if (icsr0 & ICSR0_FRE) {
+ printk(KERN_ERR "pxa_ir: dropping erroneous frame\n");
+ si->stats.rx_dropped++;
+ return;
+ }
+
+ skb = alloc_skb(len+1,GFP_ATOMIC);
if (!skb) {
printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n");
si->stats.rx_dropped++;
{
struct net_device *dev = dev_id;
struct pxa_irda *si = netdev_priv(dev);
- int icsr0;
+ int icsr0, i = 64;
/* stop RX DMA */
DCSR(si->rxdma) &= ~DCSR_RUN;
if (icsr0 & ICSR0_EIF) {
/* An error in FIFO occured, or there is a end of frame */
- pxa_irda_fir_irq_eif(si, dev);
+ pxa_irda_fir_irq_eif(si, dev, icsr0);
}
ICCR0 = 0;
pxa_irda_fir_dma_rx_start(si);
+ while ((ICSR1 & ICSR1_RNE) && i--)
+ (void)ICDR;
ICCR0 = ICCR0_ITR | ICCR0_RXE;
+ if (i < 0)
+ printk(KERN_ERR "pxa_ir: cannot clear Rx FIFO!\n");
+
return IRQ_HANDLED;
}
spin_lock_init(&mp->lock);
- port_num = pd->port_number;
+ port_num = mp->port_num = pd->port_number;
/* set default config values */
eth_port_uc_addr_get(dev, dev->dev_addr);
duplex = pd->duplex;
speed = pd->speed;
- mp->port_num = port_num;
-
/* Hook up MII support for ethtool */
mp->mii.dev = dev;
mp->mii.mdio_read = mv643xx_mdio_read;
return 0;
}
+static void mv643xx_eth_shutdown(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct mv643xx_private *mp = netdev_priv(dev);
+ unsigned int port_num = mp->port_num;
+
+ /* Mask all interrupts on ethernet port */
+ mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), 0);
+ mv_read (MV643XX_ETH_INTERRUPT_MASK_REG(port_num));
+
+ eth_port_reset(port_num);
+}
+
static struct platform_driver mv643xx_eth_driver = {
.probe = mv643xx_eth_probe,
.remove = mv643xx_eth_remove,
+ .shutdown = mv643xx_eth_shutdown,
.driver = {
.name = MV643XX_ETH_NAME,
},
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.2.0"
+#define MYRI10GE_VERSION_STR "1.3.0-1.233"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts\n");
-static int myri10ge_intr_coal_delay = 25;
+static int myri10ge_intr_coal_delay = 75;
module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay\n");
module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
-static int myri10ge_wcfifo = 1;
+static int myri10ge_wcfifo = 0;
module_param(myri10ge_wcfifo, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
/* try to refill entire ring */
while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
idx = rx->fill_cnt & rx->mask;
-
- if ((bytes < MYRI10GE_ALLOC_SIZE / 2) &&
- (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE)) {
+ if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
/* we can use part of previous page */
get_page(rx->page);
} else {
/* start next packet on a cacheline boundary */
rx->page_offset += SKB_DATA_ALIGN(bytes);
+
+#if MYRI10GE_ALLOC_SIZE > 4096
+ /* don't cross a 4KB boundary */
+ if ((rx->page_offset >> 12) !=
+ ((rx->page_offset + bytes - 1) >> 12))
+ rx->page_offset = (rx->page_offset + 4096) & ~4095;
+#endif
rx->fill_cnt++;
/* copy 8 descriptors to the firmware at a time */
mss = 0;
max_segments = MXGEFW_MAX_SEND_DESC;
- if (skb->len > (dev->mtu + ETH_HLEN)) {
+ if (skb_is_gso(skb)) {
mss = skb_shinfo(skb)->gso_size;
- if (mss != 0)
- max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
+ max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
}
if ((unlikely(avail < max_segments))) {
#define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7
#define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa
+#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1 0x3510
+#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4 0x351b
+#define PCI_DEVICE_ID_INTEL_E3000_PCIE 0x2779
+#define PCI_DEVICE_ID_INTEL_E3010_PCIE 0x277a
+#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST 0x140
+#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST 0x142
static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
{
((bridge->vendor == PCI_VENDOR_ID_SERVERWORKS
&& bridge->device ==
PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE)
+ /* ServerWorks HT2100 */
+ || (bridge->vendor == PCI_VENDOR_ID_SERVERWORKS
+ && bridge->device >=
+ PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST
+ && bridge->device <=
+ PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST)
+ /* All Intel E3000/E3010 PCIE ports */
+ || (bridge->vendor == PCI_VENDOR_ID_INTEL
+ && (bridge->device ==
+ PCI_DEVICE_ID_INTEL_E3000_PCIE
+ || bridge->device ==
+ PCI_DEVICE_ID_INTEL_E3010_PCIE))
+ /* All Intel 6310/6311/6321ESB PCIE ports */
+ || (bridge->vendor == PCI_VENDOR_ID_INTEL
+ && bridge->device >=
+ PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1
+ && bridge->device <=
+ PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4)
/* All Intel E5000 PCIE ports */
|| (bridge->vendor == PCI_VENDOR_ID_INTEL
&& bridge->device >=
for (addridx = addr; addridx < (addr + size); addridx += 4) {
ret = do_rom_fast_read(adapter, addridx, (int *)bytes);
+ *(int *)bytes = cpu_to_le32(*(int *)bytes);
if (ret != 0)
break;
bytes += 4;
int timeout = 0;
int data;
- data = *(u32*)bytes;
+ data = le32_to_cpu((*(u32*)bytes));
ret = do_rom_fast_write(adapter, addridx, data);
if (ret < 0)
tp->chipset,
rtl_chip_info[tp->chipset].name);
- i = register_netdev (dev);
- if (i)
+ rc = register_netdev (dev);
+ if (rc)
goto err_out_unmap;
DPRINTK ("EXIT, returning 0\n");
/* check for address/control and protocol compression */
p = skb->data;
- if (p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) {
+ if (p[0] == PPP_ALLSTATIONS) {
/* chop off address/control */
- if (skb->len < 3)
+ if (p[1] != PPP_UI || skb->len < 3)
goto err;
p = skb_pull(skb, 2);
}
ppp->active_filter = NULL;
#endif /* CONFIG_PPP_FILTER */
+ if (ppp->xmit_pending)
+ kfree_skb(ppp->xmit_pending);
+
kfree(ppp);
}
return 0;
}
+/*
+ * Caller holds hw_lock.
+ */
+static void ql_update_small_bufq_prod_index(struct ql3_adapter *qdev)
+{
+ struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+ if (qdev->small_buf_release_cnt >= 16) {
+ while (qdev->small_buf_release_cnt >= 16) {
+ qdev->small_buf_q_producer_index++;
+
+ if (qdev->small_buf_q_producer_index ==
+ NUM_SBUFQ_ENTRIES)
+ qdev->small_buf_q_producer_index = 0;
+ qdev->small_buf_release_cnt -= 8;
+ }
+ wmb();
+ writel(qdev->small_buf_q_producer_index,
+ &port_regs->CommonRegs.rxSmallQProducerIndex);
+ }
+}
+
/*
* Caller holds hw_lock.
*/
lrg_buf_q_ele = qdev->lrg_buf_q_virt_addr;
}
}
-
+ wmb();
qdev->lrg_buf_next_free = lrg_buf_q_ele;
-
- ql_write_common_reg(qdev,
- &port_regs->CommonRegs.
- rxLargeQProducerIndex,
- qdev->lrg_buf_q_producer_index);
+ writel(qdev->lrg_buf_q_producer_index,
+ &port_regs->CommonRegs.rxLargeQProducerIndex);
}
}
u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum);
if (checksum &
(IB_IP_IOCB_RSP_3032_ICE |
- IB_IP_IOCB_RSP_3032_CE |
- IB_IP_IOCB_RSP_3032_NUC)) {
+ IB_IP_IOCB_RSP_3032_CE)) {
printk(KERN_ERR
"%s: Bad checksum for this %s packet, checksum = %x.\n",
__func__,
((checksum &
IB_IP_IOCB_RSP_3032_TCP) ? "TCP" :
"UDP"),checksum);
- } else if (checksum & IB_IP_IOCB_RSP_3032_TCP) {
+ } else if ((checksum & IB_IP_IOCB_RSP_3032_TCP) ||
+ (checksum & IB_IP_IOCB_RSP_3032_UDP &&
+ !(checksum & IB_IP_IOCB_RSP_3032_NUC))) {
skb2->ip_summed = CHECKSUM_UNNECESSARY;
- }
+ }
}
skb2->dev = qdev->ndev;
skb2->protocol = eth_type_trans(skb2, qdev->ndev);
static int ql_tx_rx_clean(struct ql3_adapter *qdev,
int *tx_cleaned, int *rx_cleaned, int work_to_do)
{
- struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
struct net_rsp_iocb *net_rsp;
struct net_device *ndev = qdev->ndev;
- unsigned long hw_flags;
int work_done = 0;
- u32 rsp_producer_index = le32_to_cpu(*(qdev->prsp_producer_index));
-
/* While there are entries in the completion queue. */
- while ((rsp_producer_index !=
+ while ((le32_to_cpu(*(qdev->prsp_producer_index)) !=
qdev->rsp_consumer_index) && (work_done < work_to_do)) {
net_rsp = qdev->rsp_current;
work_done = *tx_cleaned + *rx_cleaned;
}
- if(work_done) {
- spin_lock_irqsave(&qdev->hw_lock, hw_flags);
-
- ql_update_lrg_bufq_prod_index(qdev);
-
- if (qdev->small_buf_release_cnt >= 16) {
- while (qdev->small_buf_release_cnt >= 16) {
- qdev->small_buf_q_producer_index++;
-
- if (qdev->small_buf_q_producer_index ==
- NUM_SBUFQ_ENTRIES)
- qdev->small_buf_q_producer_index = 0;
- qdev->small_buf_release_cnt -= 8;
- }
-
- wmb();
- ql_write_common_reg(qdev,
- &port_regs->CommonRegs.
- rxSmallQProducerIndex,
- qdev->small_buf_q_producer_index);
-
- }
-
- spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
- }
-
- return *tx_cleaned + *rx_cleaned;
+ return work_done;
}
static int ql_poll(struct net_device *ndev, int *budget)
netif_rx_complete(ndev);
spin_lock_irqsave(&qdev->hw_lock, hw_flags);
- ql_write_common_reg(qdev,
- &port_regs->CommonRegs.rspQConsumerIndex,
- qdev->rsp_consumer_index);
+ ql_update_small_bufq_prod_index(qdev);
+ ql_update_lrg_bufq_prod_index(qdev);
+ writel(qdev->rsp_consumer_index,
+ &port_regs->CommonRegs.rspQConsumerIndex);
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
ql_enable_interrupts(qdev);
int seg_cnt, seg = 0;
int frag_cnt = (int)skb_shinfo(skb)->nr_frags;
- seg_cnt = tx_cb->seg_count = ql_get_seg_count(qdev,
- (skb_shinfo(skb)->nr_frags));
- if(seg_cnt == -1) {
- printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
- return NETDEV_TX_BUSY;
- }
+ seg_cnt = tx_cb->seg_count;
/*
* Map the skb buffer first.
*/
pci_unmap_addr_set(&tx_cb->map[seg], mapaddr,
map);
pci_unmap_len_set(&tx_cb->map[seg], maplen,
- len);
+ sizeof(struct oal));
oal_entry = (struct oal_entry *)oal;
oal++;
seg++;
}
mac_iocb_ptr = tx_cb->queue_entry;
+ memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
mac_iocb_ptr->flags = OB_MAC_IOCB_REQ_X;
mac_iocb_ptr->flags |= qdev->mb_bit_mask;
goto out;
}
- if (qdev->mac_index)
- ql_write_page0_reg(qdev,
- &port_regs->mac1MaxFrameLengthReg,
- qdev->max_frame_size);
- else
- ql_write_page0_reg(qdev,
- &port_regs->mac0MaxFrameLengthReg,
- qdev->max_frame_size);
-
value = qdev->nvram_data.tcpMaxWindowSize;
ql_write_page0_reg(qdev, &port_regs->tcpMaxWindow, value);
ql_sem_unlock(qdev, QL_FLASH_SEM_MASK);
}
+ if (qdev->mac_index)
+ ql_write_page0_reg(qdev,
+ &port_regs->mac1MaxFrameLengthReg,
+ qdev->max_frame_size);
+ else
+ ql_write_page0_reg(qdev,
+ &port_regs->mac0MaxFrameLengthReg,
+ qdev->max_frame_size);
if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
if (qdev->device_id == QL3032_DEVICE_ID) {
value =
(QL3032_PORT_CONTROL_EF | QL3032_PORT_CONTROL_KIE |
- QL3032_PORT_CONTROL_EIv6 | QL3032_PORT_CONTROL_EIv4);
+ QL3032_PORT_CONTROL_EIv6 | QL3032_PORT_CONTROL_EIv4 |
+ QL3032_PORT_CONTROL_ET);
ql_write_page0_reg(qdev, &port_regs->functionControl,
((value << 16) | value));
} else {
/* Transmit and Receive Buffers */
#define NUM_LBUFQ_ENTRIES 128
-#define JUMBO_NUM_LBUFQ_ENTRIES \
-(NUM_LBUFQ_ENTRIES/(JUMBO_MTU_SIZE/NORMAL_MTU_SIZE))
+#define JUMBO_NUM_LBUFQ_ENTRIES 32
#define NUM_SBUFQ_ENTRIES 64
#define QL_SMALL_BUFFER_SIZE 32
#define QL_ADDR_ELE_PER_BUFQ_ENTRY \
#include <linux/init.h>
#include <linux/dma-mapping.h>
+#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
void __iomem *);
static int rtl8169_change_mtu(struct net_device *dev, int new_mtu);
static void rtl8169_down(struct net_device *dev);
+static void rtl8169_rx_clear(struct rtl8169_private *tp);
#ifdef CONFIG_R8169_NAPI
static int rtl8169_poll(struct net_device *dev, int *budget);
{
struct rtl8169_private *tp = netdev_priv(dev);
struct pci_dev *pdev = tp->pci_dev;
- int retval;
+ int retval = -ENOMEM;
- rtl8169_set_rxbufsize(tp, dev);
-
- retval =
- request_irq(dev->irq, rtl8169_interrupt, IRQF_SHARED, dev->name, dev);
- if (retval < 0)
- goto out;
- retval = -ENOMEM;
+ rtl8169_set_rxbufsize(tp, dev);
/*
* Rx and Tx desscriptors needs 256 bytes alignment.
tp->TxDescArray = pci_alloc_consistent(pdev, R8169_TX_RING_BYTES,
&tp->TxPhyAddr);
if (!tp->TxDescArray)
- goto err_free_irq;
+ goto out;
tp->RxDescArray = pci_alloc_consistent(pdev, R8169_RX_RING_BYTES,
&tp->RxPhyAddr);
if (!tp->RxDescArray)
- goto err_free_tx;
+ goto err_free_tx_0;
retval = rtl8169_init_ring(dev);
if (retval < 0)
- goto err_free_rx;
+ goto err_free_rx_1;
INIT_DELAYED_WORK(&tp->task, NULL);
+ smp_mb();
+
+ retval = request_irq(dev->irq, rtl8169_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (retval < 0)
+ goto err_release_ring_2;
+
rtl8169_hw_start(dev);
rtl8169_request_timer(dev);
out:
return retval;
-err_free_rx:
+err_release_ring_2:
+ rtl8169_rx_clear(tp);
+err_free_rx_1:
pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
tp->RxPhyAddr);
-err_free_tx:
+err_free_tx_0:
pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
tp->TxPhyAddr);
-err_free_irq:
- free_irq(dev->irq, dev);
goto out;
}
void __iomem *ioaddr = tp->mmio_addr;
if (!netif_running(dev))
- goto out;
+ goto out_pci_suspend;
netif_device_detach(dev);
netif_stop_queue(dev);
spin_unlock_irq(&tp->lock);
+out_pci_suspend:
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
-out:
+
return 0;
}
{
struct net_device *dev = pci_get_drvdata(pdev);
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
if (!netif_running(dev))
goto out;
netif_device_attach(dev);
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_enable_wake(pdev, PCI_D0, 0);
-
rtl8169_schedule_work(dev, rtl8169_reset_task);
out:
return 0;
static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
{
- outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
- &lp->evm_saa9730_regs->InterruptBlock1);
- outl(readl(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
- &lp->evm_saa9730_regs->InterruptStatus1);
- outl(readl(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
- EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
+ writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
+ &lp->evm_saa9730_regs->InterruptBlock1);
+ writel(readl(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
+ &lp->evm_saa9730_regs->InterruptStatus1);
+ writel(readl(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
+ EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
}
static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
{
- outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
- &lp->evm_saa9730_regs->InterruptBlock1);
- outl(readl(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
- &lp->evm_saa9730_regs->InterruptEnable1);
+ writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
+ &lp->evm_saa9730_regs->InterruptBlock1);
+ writel(readl(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
+ &lp->evm_saa9730_regs->InterruptEnable1);
}
static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
{
- outl(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
+ writel(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
}
static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
{
- outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
- &lp->evm_saa9730_regs->InterruptBlock1);
+ writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
+ &lp->evm_saa9730_regs->InterruptBlock1);
}
static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
{
- outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
- &lp->evm_saa9730_regs->InterruptBlock1);
+ writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
+ &lp->evm_saa9730_regs->InterruptBlock1);
}
static void __attribute_used__ show_saa9730_regs(struct lan_saa9730_private *lp)
printk("lp->lan_saa9730_regs->RxStatus = %x\n",
readl(&lp->lan_saa9730_regs->RxStatus));
for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
- outl(i, &lp->lan_saa9730_regs->CamAddress);
+ writel(i, &lp->lan_saa9730_regs->CamAddress);
printk("lp->lan_saa9730_regs->CamData = %x\n",
readl(&lp->lan_saa9730_regs->CamData));
}
* Set rx buffer A and rx buffer B to point to the first two buffer
* spaces.
*/
- outl(lp->dma_addr + rxoffset,
- &lp->lan_saa9730_regs->RxBuffA);
- outl(lp->dma_addr + rxoffset +
- LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_RCV_Q_SIZE,
- &lp->lan_saa9730_regs->RxBuffB);
+ writel(lp->dma_addr + rxoffset, &lp->lan_saa9730_regs->RxBuffA);
+ writel(lp->dma_addr + rxoffset +
+ LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_RCV_Q_SIZE,
+ &lp->lan_saa9730_regs->RxBuffB);
/*
* Set txm_buf_a and txm_buf_b to point to the first two buffer
* space
*/
- outl(lp->dma_addr + txoffset,
- &lp->lan_saa9730_regs->TxBuffA);
- outl(lp->dma_addr + txoffset +
- LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_TXM_Q_SIZE,
- &lp->lan_saa9730_regs->TxBuffB);
+ writel(lp->dma_addr + txoffset,
+ &lp->lan_saa9730_regs->TxBuffA);
+ writel(lp->dma_addr + txoffset +
+ LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_TXM_Q_SIZE,
+ &lp->lan_saa9730_regs->TxBuffB);
/* Set packet number */
- outl((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
- (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
- (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
- (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
- &lp->lan_saa9730_regs->PacketCount);
+ writel((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
+ (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
+ (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
+ (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
+ &lp->lan_saa9730_regs->PacketCount);
return 0;
for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
/* First set address to where data is written */
- outl(i, &lp->lan_saa9730_regs->CamAddress);
- outl((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16)
- | (NetworkAddress[2] << 8) | NetworkAddress[3],
- &lp->lan_saa9730_regs->CamData);
+ writel(i, &lp->lan_saa9730_regs->CamAddress);
+ writel((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16) |
+ (NetworkAddress[2] << 8) | NetworkAddress[3],
+ &lp->lan_saa9730_regs->CamData);
NetworkAddress += 4;
}
return 0;
}
/* Now set the control and address register. */
- outl(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
- &lp->lan_saa9730_regs->StationMgmtCtl);
+ writel(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
+ &lp->lan_saa9730_regs->StationMgmtCtl);
/* check link status, spin here till station is not busy */
i = 0;
/* Link is down, reset the PHY first. */
/* set PHY address = 'CONTROL' */
- outl(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
- &lp->lan_saa9730_regs->StationMgmtCtl);
+ writel(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
+ &lp->lan_saa9730_regs->StationMgmtCtl);
/* Wait for 1 ms. */
mdelay(1);
/* set 'CONTROL' = force reset and renegotiate */
- outl(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
- PHY_CONTROL_RESTART_AUTO_NEG,
- &lp->lan_saa9730_regs->StationMgmtData);
+ writel(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
+ PHY_CONTROL_RESTART_AUTO_NEG,
+ &lp->lan_saa9730_regs->StationMgmtData);
/* Wait for 50 ms. */
mdelay(50);
/* set 'BUSY' to start operation */
- outl(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
- PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
+ writel(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
+ PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
/* await completion */
i = 0;
for (l = 0; l < 2; l++) {
/* set PHY address = 'STATUS' */
- outl(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
- PHY_STATUS,
- &lp->lan_saa9730_regs->StationMgmtCtl);
+ writel(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
+ PHY_STATUS,
+ &lp->lan_saa9730_regs->StationMgmtCtl);
/* await completion */
i = 0;
static int lan_saa9730_control_init(struct lan_saa9730_private *lp)
{
/* Initialize DMA control register. */
- outl((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
- (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
- (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
- | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
- DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
- &lp->lan_saa9730_regs->LanDmaCtl);
+ writel((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
+ (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
+ (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
+ | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
+ DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
+ &lp->lan_saa9730_regs->LanDmaCtl);
/* Initial MAC control register. */
- outl((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
- &lp->lan_saa9730_regs->MacCtl);
+ writel((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
+ &lp->lan_saa9730_regs->MacCtl);
/* Initialize CAM control register. */
- outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
- &lp->lan_saa9730_regs->CamCtl);
+ writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
+ &lp->lan_saa9730_regs->CamCtl);
/*
* Initialize CAM enable register, only turn on first entry, should
* contain own addr.
*/
- outl(0x0001, &lp->lan_saa9730_regs->CamEnable);
+ writel(0x0001, &lp->lan_saa9730_regs->CamEnable);
/* Initialize Tx control register */
- outl(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
+ writel(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
/* Initialize Rcv control register */
- outl(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
+ writel(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
/* Reset DMA engine */
- outl(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
+ writel(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
return 0;
}
int i;
/* Stop DMA first */
- outl(readl(&lp->lan_saa9730_regs->LanDmaCtl) &
- ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
- &lp->lan_saa9730_regs->LanDmaCtl);
+ writel(readl(&lp->lan_saa9730_regs->LanDmaCtl) &
+ ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
+ &lp->lan_saa9730_regs->LanDmaCtl);
/* Set the SW Reset bits in DMA and MAC control registers */
- outl(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
- outl(readl(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
- &lp->lan_saa9730_regs->MacCtl);
+ writel(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
+ writel(readl(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
+ &lp->lan_saa9730_regs->MacCtl);
/*
* Wait for MAC reset to have finished. The reset bit is auto cleared
/* Stop lan controller. */
lan_saa9730_stop(lp);
- outl(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
- &lp->lan_saa9730_regs->Timeout);
+ writel(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
+ &lp->lan_saa9730_regs->Timeout);
return 0;
}
lp->PendingTxmPacketIndex = 0;
lp->PendingTxmBufferIndex = 0;
- outl(readl(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
- DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
+ writel(readl(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
+ DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
/* For Tx, turn on MAC then DMA */
- outl(readl(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
- &lp->lan_saa9730_regs->TxCtl);
+ writel(readl(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
+ &lp->lan_saa9730_regs->TxCtl);
/* For Rx, turn on DMA then MAC */
- outl(readl(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
- &lp->lan_saa9730_regs->RxCtl);
+ writel(readl(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
+ &lp->lan_saa9730_regs->RxCtl);
/* Set Ok2Use to let hardware own the buffers. */
- outl(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
+ writel(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
return 0;
}
printk("lan_saa9730_tx interrupt\n");
/* Clear interrupt. */
- outl(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
+ writel(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
while (1) {
pPacket = lp->TxmBuffer[lp->PendingTxmBufferIndex]
printk("lan_saa9730_rx interrupt\n");
/* Clear receive interrupts. */
- outl(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
- DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
+ writel(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
+ DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
/* Address next packet */
BufferIndex = lp->NextRcvBufferIndex;
*pPacket = cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF);
/* Make sure A or B is available to hardware as appropriate. */
- outl(BufferIndex ? OK2USE_RX_B : OK2USE_RX_A,
- &lp->lan_saa9730_regs->Ok2Use);
+ writel(BufferIndex ? OK2USE_RX_B : OK2USE_RX_A,
+ &lp->lan_saa9730_regs->Ok2Use);
/* Go to next packet in sequence. */
lp->NextRcvPacketIndex++;
(len << TX_STAT_CTL_LENGTH_SHF));
/* Make sure A or B is available to hardware as appropriate. */
- outl(BufferIndex ? OK2USE_TX_B : OK2USE_TX_A,
- &lp->lan_saa9730_regs->Ok2Use);
+ writel(BufferIndex ? OK2USE_TX_B : OK2USE_TX_A,
+ &lp->lan_saa9730_regs->Ok2Use);
return 0;
}
if (dev->flags & IFF_PROMISC) {
/* accept all packets */
- outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
- CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
- &lp->lan_saa9730_regs->CamCtl);
+ writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
+ CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
+ &lp->lan_saa9730_regs->CamCtl);
} else {
if (dev->flags & IFF_ALLMULTI) {
/* accept all multicast packets */
- outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
- CAM_CONTROL_BROAD_ACC,
- &lp->lan_saa9730_regs->CamCtl);
+ writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
+ CAM_CONTROL_BROAD_ACC,
+ &lp->lan_saa9730_regs->CamCtl);
} else {
/*
* Will handle the multicast stuff later. -carstenl
* Controller-specific things
*/
- volatile void __iomem *sbm_base; /* MAC's base address */
+ void __iomem *sbm_base; /* MAC's base address */
sbmac_state_t sbm_state; /* current state */
volatile void __iomem *sbm_macenable; /* MAC Enable Register */
goto out;
}
- spin_lock_bh(&priv->lock);
+ spin_lock(&priv->lock);
if (unlikely(!netif_carrier_ok(dev))) {
err = -ENOLINK;
netif_stop_queue(dev);
out_unlock:
- spin_unlock_bh(&priv->lock);
+ spin_unlock(&priv->lock);
out:
dev_kfree_skb(skb);
priv->pm_config = 0;
/* Interrupts already disabled by sc92031_stop or sc92031_probe */
- spin_lock(&priv->lock);
+ spin_lock_bh(&priv->lock);
_sc92031_reset(dev);
mmiowb();
- spin_unlock(&priv->lock);
+ spin_unlock_bh(&priv->lock);
sc92031_enable_interrupts(dev);
if (netif_carrier_ok(dev))
/* Disable interrupts, stop Tx and Rx. */
sc92031_disable_interrupts(dev);
- spin_lock(&priv->lock);
+ spin_lock_bh(&priv->lock);
_sc92031_disable_tx_rx(dev);
_sc92031_tx_clear(dev);
mmiowb();
- spin_unlock(&priv->lock);
+ spin_unlock_bh(&priv->lock);
free_irq(pdev->irq, dev);
pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
/* Disable interrupts, stop Tx and Rx. */
sc92031_disable_interrupts(dev);
- spin_lock(&priv->lock);
+ spin_lock_bh(&priv->lock);
_sc92031_disable_tx_rx(dev);
_sc92031_tx_clear(dev);
mmiowb();
- spin_unlock(&priv->lock);
+ spin_unlock_bh(&priv->lock);
out:
pci_set_power_state(pdev, pci_choose_state(pdev, state));
goto out;
/* Interrupts already disabled by sc92031_suspend */
- spin_lock(&priv->lock);
+ spin_lock_bh(&priv->lock);
_sc92031_reset(dev);
mmiowb();
- spin_unlock(&priv->lock);
+ spin_unlock_bh(&priv->lock);
sc92031_enable_interrupts(dev);
netif_device_attach(dev);
u32 feature;
} mii_chip_table[] = {
{ "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 },
+ { "Broadcom PHY AC131", { 0x0143, 0xbc70 }, LAN, 0 },
{ "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN, 0 },
{ "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN, F_PHY_88E1111 },
{ "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN, 0 },
} else {
struct sk_buff * skb;
+ pci_unmap_single(sis_priv->pci_dev,
+ sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
+ PCI_DMA_FROMDEVICE);
+
+ /* refill the Rx buffer, what if there is not enought
+ * memory for new socket buffer ?? */
+ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
+ /*
+ * Not enough memory to refill the buffer
+ * so we need to recycle the old one so
+ * as to avoid creating a memory hole
+ * in the rx ring
+ */
+ skb = sis_priv->rx_skbuff[entry];
+ sis_priv->stats.rx_dropped++;
+ goto refill_rx_ring;
+ }
+
/* This situation should never happen, but due to
some unknow bugs, it is possible that
we are working on NULL sk_buff :-( */
break;
}
- pci_unmap_single(sis_priv->pci_dev,
- sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
- PCI_DMA_FROMDEVICE);
/* give the socket buffer to upper layers */
skb = sis_priv->rx_skbuff[entry];
skb_put(skb, rx_size);
net_dev->last_rx = jiffies;
sis_priv->stats.rx_bytes += rx_size;
sis_priv->stats.rx_packets++;
-
- /* refill the Rx buffer, what if there is not enought
- * memory for new socket buffer ?? */
- if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
- /* not enough memory for skbuff, this makes a
- * "hole" on the buffer ring, it is not clear
- * how the hardware will react to this kind
- * of degenerated buffer */
- if (netif_msg_rx_status(sis_priv))
- printk(KERN_INFO "%s: Memory squeeze,"
- "deferring packet.\n",
- net_dev->name);
- sis_priv->rx_skbuff[entry] = NULL;
- /* reset buffer descriptor state */
- sis_priv->rx_ring[entry].cmdsts = 0;
- sis_priv->rx_ring[entry].bufptr = 0;
- sis_priv->stats.rx_dropped++;
- sis_priv->cur_rx++;
- break;
- }
+ sis_priv->dirty_rx++;
+refill_rx_ring:
skb->dev = net_dev;
sis_priv->rx_skbuff[entry] = skb;
sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
sis_priv->rx_ring[entry].bufptr =
pci_map_single(sis_priv->pci_dev, skb->data,
RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
- sis_priv->dirty_rx++;
}
sis_priv->cur_rx++;
entry = sis_priv->cur_rx % NUM_RX_DESC;
static const int rxqaddr[] = { Q_R1, Q_R2 };
static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F };
static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F };
-static const u32 irqmask[] = { IS_R1_F|IS_XA1_F, IS_R2_F|IS_XA2_F };
+static const u32 napimask[] = { IS_R1_F|IS_XA1_F, IS_R2_F|IS_XA2_F };
+static const u32 portmask[] = { IS_PORT_1, IS_PORT_2 };
static int skge_get_regs_len(struct net_device *dev)
{
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
- enum pause_control save_mode;
- u32 ctrl;
+ u16 ctrl;
- /* Bring hardware out of reset */
skge_write16(hw, B0_CTST, CS_RST_CLR);
skge_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
- skge_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
- skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+ /* Turn on Vaux */
+ skge_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
- /* Force to 10/100 skge_reset will re-enable on resume */
- save_mode = skge->flow_control;
- skge->flow_control = FLOW_MODE_SYMMETRIC;
+ /* WA code for COMA mode -- clear PHY reset */
+ if (hw->chip_id == CHIP_ID_YUKON_LITE &&
+ hw->chip_rev >= CHIP_REV_YU_LITE_A3) {
+ u32 reg = skge_read32(hw, B2_GP_IO);
+ reg |= GP_DIR_9;
+ reg &= ~GP_IO_9;
+ skge_write32(hw, B2_GP_IO, reg);
+ }
- ctrl = skge->advertising;
- skge->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+ skge_write32(hw, SK_REG(port, GPHY_CTRL),
+ GPC_DIS_SLEEP |
+ GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0 |
+ GPC_ANEG_1 | GPC_RST_SET);
- skge_phy_reset(skge);
+ skge_write32(hw, SK_REG(port, GPHY_CTRL),
+ GPC_DIS_SLEEP |
+ GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0 |
+ GPC_ANEG_1 | GPC_RST_CLR);
+
+ skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ /* Force to 10/100 skge_reset will re-enable on resume */
+ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
+ PHY_AN_100FULL | PHY_AN_100HALF |
+ PHY_AN_10FULL | PHY_AN_10HALF| PHY_AN_CSMA);
+ /* no 1000 HD/FD */
+ gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, 0);
+ gm_phy_write(hw, port, PHY_MARV_CTRL,
+ PHY_CT_RESET | PHY_CT_SPS_LSB | PHY_CT_ANE |
+ PHY_CT_RE_CFG | PHY_CT_DUP_MD);
- skge->flow_control = save_mode;
- skge->advertising = ctrl;
/* Set GMAC to no flow control and auto update for speed/duplex */
gma_write16(hw, port, GM_GP_CTRL,
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
- if (wol->wolopts & wol_supported(hw))
+ if (wol->wolopts & ~wol_supported(hw))
return -EOPNOTSUPP;
skge->wol = wol->wolopts;
- if (!netif_running(dev))
- skge_wol_init(skge);
return 0;
}
struct skge_hw *hw = skge->hw;
int port = skge->port;
- mutex_lock(&hw->phy_mutex);
+ spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS) {
switch (mode) {
case LED_MODE_OFF:
PHY_M_LED_MO_RX(MO_LED_ON));
}
}
- mutex_unlock(&hw->phy_mutex);
+ spin_unlock_bh(&hw->phy_lock);
}
/* blink LED's for finding board */
xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl);
/* Poll PHY for status changes */
- schedule_delayed_work(&skge->link_thread, LINK_HZ);
+ mod_timer(&skge->link_timer, jiffies + LINK_HZ);
}
static void xm_check_link(struct net_device *dev)
* Since internal PHY is wired to a level triggered pin, can't
* get an interrupt when carrier is detected.
*/
-static void xm_link_timer(struct work_struct *work)
+static void xm_link_timer(unsigned long arg)
{
- struct skge_port *skge =
- container_of(work, struct skge_port, link_thread.work);
+ struct skge_port *skge = (struct skge_port *) arg;
struct net_device *dev = skge->netdev;
struct skge_hw *hw = skge->hw;
int port = skge->port;
goto nochange;
}
- mutex_lock(&hw->phy_mutex);
+ spin_lock(&hw->phy_lock);
xm_check_link(dev);
- mutex_unlock(&hw->phy_mutex);
+ spin_unlock(&hw->phy_lock);
nochange:
if (netif_running(dev))
- schedule_delayed_work(&skge->link_thread, LINK_HZ);
+ mod_timer(&skge->link_timer, jiffies + LINK_HZ);
}
static void genesis_mac_init(struct skge_hw *hw, int port)
netif_stop_queue(skge->netdev);
netif_carrier_off(skge->netdev);
- mutex_lock(&hw->phy_mutex);
+ spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS) {
genesis_reset(hw, port);
genesis_mac_init(hw, port);
yukon_reset(hw, port);
yukon_init(hw, port);
}
- mutex_unlock(&hw->phy_mutex);
+ spin_unlock_bh(&hw->phy_lock);
dev->set_multicast_list(dev);
}
/* fallthru */
case SIOCGMIIREG: {
u16 val = 0;
- mutex_lock(&hw->phy_mutex);
+ spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS)
err = __xm_phy_read(hw, skge->port, data->reg_num & 0x1f, &val);
else
err = __gm_phy_read(hw, skge->port, data->reg_num & 0x1f, &val);
- mutex_unlock(&hw->phy_mutex);
+ spin_unlock_bh(&hw->phy_lock);
data->val_out = val;
break;
}
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- mutex_lock(&hw->phy_mutex);
+ spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS)
err = xm_phy_write(hw, skge->port, data->reg_num & 0x1f,
data->val_in);
else
err = gm_phy_write(hw, skge->port, data->reg_num & 0x1f,
data->val_in);
- mutex_unlock(&hw->phy_mutex);
+ spin_unlock_bh(&hw->phy_lock);
break;
}
return err;
goto free_rx_ring;
/* Initialize MAC */
- mutex_lock(&hw->phy_mutex);
+ spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS)
genesis_mac_init(hw, port);
else
yukon_mac_init(hw, port);
- mutex_unlock(&hw->phy_mutex);
+ spin_unlock_bh(&hw->phy_lock);
/* Configure RAMbuffers */
chunk = hw->ram_size / ((hw->ports + 1)*2);
skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
skge_led(skge, LED_MODE_ON);
+ spin_lock_irq(&hw->hw_lock);
+ hw->intr_mask |= portmask[port];
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
+
netif_poll_enable(dev);
return 0;
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
netif_stop_queue(dev);
+
if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
- cancel_delayed_work(&skge->link_thread);
+ del_timer_sync(&skge->link_timer);
+
+ netif_poll_disable(dev);
+ netif_carrier_off(dev);
+
+ spin_lock_irq(&hw->hw_lock);
+ hw->intr_mask &= ~portmask[port];
+ skge_write32(hw, B0_IMSK, hw->intr_mask);
+ spin_unlock_irq(&hw->hw_lock);
skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_OFF);
if (hw->chip_id == CHIP_ID_GENESIS)
skge_led(skge, LED_MODE_OFF);
- netif_poll_disable(dev);
+ netif_tx_lock_bh(dev);
skge_tx_clean(dev);
+ netif_tx_unlock_bh(dev);
+
skge_rx_clean(skge);
kfree(skge->rx_ring.start);
struct skge_port *skge = netdev_priv(dev);
struct skge_element *e;
- netif_tx_lock_bh(dev);
for (e = skge->tx_ring.to_clean; e != skge->tx_ring.to_use; e = e->next) {
struct skge_tx_desc *td = e->desc;
skge_tx_free(skge, e, td->control);
skge->tx_ring.to_clean = e;
netif_wake_queue(dev);
- netif_tx_unlock_bh(dev);
}
static void skge_tx_timeout(struct net_device *dev)
spin_lock_irqsave(&hw->hw_lock, flags);
__netif_rx_complete(dev);
- hw->intr_mask |= irqmask[skge->port];
+ hw->intr_mask |= napimask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
skge_read32(hw, B0_IMSK);
spin_unlock_irqrestore(&hw->hw_lock, flags);
}
/*
- * Interrupt from PHY are handled in work queue
+ * Interrupt from PHY are handled in tasklet (softirq)
* because accessing phy registers requires spin wait which might
* cause excess interrupt latency.
*/
-static void skge_extirq(struct work_struct *work)
+static void skge_extirq(unsigned long arg)
{
- struct skge_hw *hw = container_of(work, struct skge_hw, phy_work);
+ struct skge_hw *hw = (struct skge_hw *) arg;
int port;
- mutex_lock(&hw->phy_mutex);
for (port = 0; port < hw->ports; port++) {
struct net_device *dev = hw->dev[port];
- struct skge_port *skge = netdev_priv(dev);
if (netif_running(dev)) {
+ struct skge_port *skge = netdev_priv(dev);
+
+ spin_lock(&hw->phy_lock);
if (hw->chip_id != CHIP_ID_GENESIS)
yukon_phy_intr(skge);
else if (hw->phy_type == SK_PHY_BCOM)
bcom_phy_intr(skge);
+ spin_unlock(&hw->phy_lock);
}
}
- mutex_unlock(&hw->phy_mutex);
spin_lock_irq(&hw->hw_lock);
hw->intr_mask |= IS_EXT_REG;
status &= hw->intr_mask;
if (status & IS_EXT_REG) {
hw->intr_mask &= ~IS_EXT_REG;
- schedule_work(&hw->phy_work);
+ tasklet_schedule(&hw->phy_task);
}
if (status & (IS_XA1_F|IS_R1_F)) {
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
- /* disable Rx */
- ctrl = gma_read16(hw, port, GM_GP_CTRL);
- gma_write16(hw, port, GM_GP_CTRL, ctrl & ~GM_GPCR_RX_ENA);
+ if (!netif_running(dev)) {
+ memcpy_toio(hw->regs + B2_MAC_1 + port*8, dev->dev_addr, ETH_ALEN);
+ memcpy_toio(hw->regs + B2_MAC_2 + port*8, dev->dev_addr, ETH_ALEN);
+ } else {
+ /* disable Rx */
+ spin_lock_bh(&hw->phy_lock);
+ ctrl = gma_read16(hw, port, GM_GP_CTRL);
+ gma_write16(hw, port, GM_GP_CTRL, ctrl & ~GM_GPCR_RX_ENA);
- memcpy_toio(hw->regs + B2_MAC_1 + port*8, dev->dev_addr, ETH_ALEN);
- memcpy_toio(hw->regs + B2_MAC_2 + port*8, dev->dev_addr, ETH_ALEN);
+ memcpy_toio(hw->regs + B2_MAC_1 + port*8, dev->dev_addr, ETH_ALEN);
+ memcpy_toio(hw->regs + B2_MAC_2 + port*8, dev->dev_addr, ETH_ALEN);
- if (netif_running(dev)) {
if (hw->chip_id == CHIP_ID_GENESIS)
xm_outaddr(hw, port, XM_SA, dev->dev_addr);
else {
gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
}
- }
- gma_write16(hw, port, GM_GP_CTRL, ctrl);
+ gma_write16(hw, port, GM_GP_CTRL, ctrl);
+ spin_unlock_bh(&hw->phy_lock);
+ }
return 0;
}
else
hw->ram_size = t8 * 4096;
- hw->intr_mask = IS_HW_ERR | IS_PORT_1;
- if (hw->ports > 1)
- hw->intr_mask |= IS_PORT_2;
+ hw->intr_mask = IS_HW_ERR;
+ /* Use PHY IRQ for all but fiber based Genesis board */
if (!(hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC))
hw->intr_mask |= IS_EXT_REG;
skge_write32(hw, B0_IMSK, hw->intr_mask);
- mutex_lock(&hw->phy_mutex);
for (i = 0; i < hw->ports; i++) {
if (hw->chip_id == CHIP_ID_GENESIS)
genesis_reset(hw, i);
else
yukon_reset(hw, i);
}
- mutex_unlock(&hw->phy_mutex);
return 0;
}
skge->netdev = dev;
skge->hw = hw;
skge->msg_enable = netif_msg_init(debug, default_msg);
+
skge->tx_ring.count = DEFAULT_TX_RING_SIZE;
skge->rx_ring.count = DEFAULT_RX_RING_SIZE;
skge->port = port;
/* Only used for Genesis XMAC */
- INIT_DELAYED_WORK(&skge->link_thread, xm_link_timer);
+ setup_timer(&skge->link_timer, xm_link_timer, (unsigned long) skge);
if (hw->chip_id != CHIP_ID_GENESIS) {
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
}
hw->pdev = pdev;
- mutex_init(&hw->phy_mutex);
- INIT_WORK(&hw->phy_work, skge_extirq);
spin_lock_init(&hw->hw_lock);
+ spin_lock_init(&hw->phy_lock);
+ tasklet_init(&hw->phy_task, &skge_extirq, (unsigned long) hw);
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
if (!hw->regs) {
dev0 = hw->dev[0];
unregister_netdev(dev0);
+ tasklet_disable(&hw->phy_task);
+
spin_lock_irq(&hw->hw_lock);
hw->intr_mask = 0;
skge_write32(hw, B0_IMSK, 0);
}
#ifdef CONFIG_PM
-static int vaux_avail(struct pci_dev *pdev)
-{
- int pm_cap;
-
- pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pm_cap) {
- u16 ctl;
- pci_read_config_word(pdev, pm_cap + PCI_PM_PMC, &ctl);
- if (ctl & PCI_PM_CAP_AUX_POWER)
- return 1;
- }
- return 0;
-}
-
-
static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct skge_hw *hw = pci_get_drvdata(pdev);
wol |= skge->wol;
}
- if (wol && vaux_avail(pdev))
- skge_write8(hw, B0_POWER_CTRL,
- PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
-
skge_write32(hw, B0_IMSK, 0);
pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
}
#endif
+static void skge_shutdown(struct pci_dev *pdev)
+{
+ struct skge_hw *hw = pci_get_drvdata(pdev);
+ int i, wol = 0;
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct skge_port *skge = netdev_priv(dev);
+
+ if (skge->wol)
+ skge_wol_init(skge);
+ wol |= skge->wol;
+ }
+
+ pci_enable_wake(pdev, PCI_D3hot, wol);
+ pci_enable_wake(pdev, PCI_D3cold, wol);
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+}
+
static struct pci_driver skge_driver = {
.name = DRV_NAME,
.id_table = skge_id_table,
.suspend = skge_suspend,
.resume = skge_resume,
#endif
+ .shutdown = skge_shutdown,
};
static int __init skge_init_module(void)
u32 ram_size;
u32 ram_offset;
u16 phy_addr;
- struct work_struct phy_work;
- struct mutex phy_mutex;
+ spinlock_t phy_lock;
+ struct tasklet_struct phy_task;
};
enum pause_control {
struct net_device_stats net_stats;
- struct delayed_work link_thread;
+ struct timer_list link_timer;
enum pause_control flow_control;
enum pause_status flow_status;
u8 rx_csum;
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.13"
+#define DRV_VERSION "1.14"
#define PFX DRV_NAME " "
/*
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
+#ifdef broken
+ /* This device causes data corruption problems that are not resolved */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
+#endif
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
ledover &= ~PHY_M_LED_MO_RX;
}
- if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+ hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
/* apply fixes in PHY AFE */
- pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
/* increase differential signal amplitude in 10BASE-T */
gm_phy_write(hw, port, 0x17, 0x2002);
/* set page register to 0 */
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
} else if (hw->chip_id != CHIP_ID_YUKON_EX) {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
- if (hw->dev[port]->mtu > ETH_DATA_LEN) {
- /* set Tx GMAC FIFO Almost Empty Threshold */
- sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180);
- /* Disable Store & Forward mode for TX */
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
- }
+
+ /* set Tx GMAC FIFO Almost Empty Threshold */
+ sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
+ (ECU_JUMBO_WM << 16) | ECU_AE_THR);
+
+ if (hw->dev[port]->mtu > ETH_DATA_LEN)
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_JUMBO_ENA | TX_STFW_DIS);
+ else
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_JUMBO_DIS | TX_STFW_ENA);
}
}
/* Set almost empty threshold */
if (hw->chip_id == CHIP_ID_YUKON_EC_U
&& hw->chip_rev == CHIP_REV_YU_EC_U_A0)
- sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
+ sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
/* Stop more packets from being queued */
netif_stop_queue(dev);
+ netif_carrier_off(dev);
/* Disable port IRQ */
imask = sky2_read32(hw, B0_IMSK);
sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
RB_RST_SET | RB_DIS_OP_MD);
- /* WA for dev. #4.209 */
- if (hw->chip_id == CHIP_ID_YUKON_EC_U
- && (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
- sky2->speed != SPEED_1000 ?
- TX_STFW_ENA : TX_STFW_DIS);
-
ctrl = gma_read16(hw, port, GM_GP_CTRL);
ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
gma_write16(hw, port, GM_GP_CTRL, ctrl);
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
int err;
u16 ctl, mode;
u32 imask;
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
- /* TSO on Yukon Ultra and MTU > 1500 not supported */
- if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
- dev->features &= ~NETIF_F_TSO;
+ if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_FE)
+ return -EINVAL;
if (!netif_running(dev)) {
dev->mtu = new_mtu;
synchronize_irq(hw->pdev->irq);
- ctl = gma_read16(hw, sky2->port, GM_GP_CTRL);
- gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
+ if (new_mtu > ETH_DATA_LEN) {
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_JUMBO_ENA | TX_STFW_DIS);
+ dev->features &= NETIF_F_TSO | NETIF_F_SG | NETIF_F_IP_CSUM;
+ } else
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_JUMBO_DIS | TX_STFW_ENA);
+ }
+
+ ctl = gma_read16(hw, port, GM_GP_CTRL);
+ gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
sky2_rx_stop(sky2);
sky2_rx_clean(sky2);
if (dev->mtu > ETH_DATA_LEN)
mode |= GM_SMOD_JUMBO_ENA;
- gma_write16(hw, sky2->port, GM_SERIAL_MODE, mode);
+ gma_write16(hw, port, GM_SERIAL_MODE, mode);
- sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD);
+ sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
err = sky2_rx_start(sky2);
sky2_write32(hw, B0_IMSK, imask);
if (err)
dev_close(dev);
else {
- gma_write16(hw, sky2->port, GM_GP_CTRL, ctl);
+ gma_write16(hw, port, GM_GP_CTRL, ctl);
netif_poll_enable(hw->dev[0]);
netif_wake_queue(dev);
}
}
-/* This should never happen it is a fatal situation */
-static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
- const char *rxtx, u32 mask)
+/* This should never happen it is a bug. */
+static void sky2_le_error(struct sky2_hw *hw, unsigned port,
+ u16 q, unsigned ring_size)
{
struct net_device *dev = hw->dev[port];
struct sky2_port *sky2 = netdev_priv(dev);
- u32 imask;
-
- printk(KERN_ERR PFX "%s: %s descriptor error (hardware problem)\n",
- dev ? dev->name : "<not registered>", rxtx);
+ unsigned idx;
+ const u64 *le = (q == Q_R1 || q == Q_R2)
+ ? (u64 *) sky2->rx_le : (u64 *) sky2->tx_le;
- imask = sky2_read32(hw, B0_IMSK);
- imask &= ~mask;
- sky2_write32(hw, B0_IMSK, imask);
+ idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
+ printk(KERN_ERR PFX "%s: descriptor error q=%#x get=%u [%llx] put=%u\n",
+ dev->name, (unsigned) q, idx, (unsigned long long) le[idx],
+ (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
- if (dev) {
- spin_lock(&sky2->phy_lock);
- sky2_link_down(sky2);
- spin_unlock(&sky2->phy_lock);
- }
+ sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
}
/* If idle then force a fake soft NAPI poll once a second
mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
}
-
-static int sky2_poll(struct net_device *dev0, int *budget)
+/* Hardware/software error handling */
+static void sky2_err_intr(struct sky2_hw *hw, u32 status)
{
- struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
- int work_limit = min(dev0->quota, *budget);
- int work_done = 0;
- u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
+ if (net_ratelimit())
+ dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
- if (status & Y2_IS_IRQ_PHY1)
- sky2_phy_intr(hw, 0);
-
- if (status & Y2_IS_IRQ_PHY2)
- sky2_phy_intr(hw, 1);
-
if (status & Y2_IS_IRQ_MAC1)
sky2_mac_intr(hw, 0);
sky2_mac_intr(hw, 1);
if (status & Y2_IS_CHK_RX1)
- sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
+ sky2_le_error(hw, 0, Q_R1, RX_LE_SIZE);
if (status & Y2_IS_CHK_RX2)
- sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
+ sky2_le_error(hw, 1, Q_R2, RX_LE_SIZE);
if (status & Y2_IS_CHK_TXA1)
- sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
+ sky2_le_error(hw, 0, Q_XA1, TX_RING_SIZE);
if (status & Y2_IS_CHK_TXA2)
- sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
+ sky2_le_error(hw, 1, Q_XA2, TX_RING_SIZE);
+}
+
+static int sky2_poll(struct net_device *dev0, int *budget)
+{
+ struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
+ int work_limit = min(dev0->quota, *budget);
+ int work_done = 0;
+ u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
+
+ if (unlikely(status & Y2_IS_ERROR))
+ sky2_err_intr(hw, status);
+
+ if (status & Y2_IS_IRQ_PHY1)
+ sky2_phy_intr(hw, 0);
+
+ if (status & Y2_IS_IRQ_PHY2)
+ sky2_phy_intr(hw, 1);
work_done = sky2_status_intr(hw, work_limit);
if (work_done < work_limit) {
int i;
/* disable ASF */
- if (hw->chip_id <= CHIP_ID_YUKON_EC) {
- if (hw->chip_id == CHIP_ID_YUKON_EX) {
- status = sky2_read16(hw, HCU_CCSR);
- status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
- HCU_CCSR_UC_STATE_MSK);
- sky2_write16(hw, HCU_CCSR, status);
- } else
- sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
- sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
- }
+ if (hw->chip_id == CHIP_ID_YUKON_EX) {
+ status = sky2_read16(hw, HCU_CCSR);
+ status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
+ HCU_CCSR_UC_STATE_MSK);
+ sky2_write16(hw, HCU_CCSR, status);
+ } else
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+ sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
/* do a SW reset */
sky2_write8(hw, B0_CTST, CS_RST_SET);
regs->len - B3_RI_WTO_R1);
}
+/* In order to do Jumbo packets on these chips, need to turn off the
+ * transmit store/forward. Therefore checksum offload won't work.
+ */
+static int no_tx_offload(struct net_device *dev)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+ const struct sky2_hw *hw = sky2->hw;
+
+ return dev->mtu > ETH_DATA_LEN &&
+ (hw->chip_id == CHIP_ID_YUKON_EX
+ || hw->chip_id == CHIP_ID_YUKON_EC_U);
+}
+
+static int sky2_set_tx_csum(struct net_device *dev, u32 data)
+{
+ if (data && no_tx_offload(dev))
+ return -EINVAL;
+
+ return ethtool_op_set_tx_csum(dev, data);
+}
+
+
+static int sky2_set_tso(struct net_device *dev, u32 data)
+{
+ if (data && no_tx_offload(dev))
+ return -EINVAL;
+
+ return ethtool_op_set_tso(dev, data);
+}
+
static const struct ethtool_ops sky2_ethtool_ops = {
.get_settings = sky2_get_settings,
.set_settings = sky2_set_settings,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
.get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
+ .set_tx_csum = sky2_set_tx_csum,
.get_tso = ethtool_op_get_tso,
- .set_tso = ethtool_op_set_tso,
+ .set_tso = sky2_set_tso,
.get_rx_csum = sky2_get_rx_csum,
.set_rx_csum = sky2_set_rx_csum,
.get_strings = sky2_get_strings,
goto out;
pci_enable_wake(pdev, PCI_D0, 0);
+
+ /* Re-enable all clocks */
+ if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
sky2_reset(hw);
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
| Y2_IS_CHK_TXA1 | Y2_IS_CHK_RX1,
Y2_IS_PORT_2 = Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2
| Y2_IS_CHK_TXA2 | Y2_IS_CHK_RX2,
+ Y2_IS_ERROR = Y2_IS_HW_ERR |
+ Y2_IS_IRQ_MAC1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_RX1 |
+ Y2_IS_IRQ_MAC2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_RX2,
};
/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
TX_GMF_RP = 0x0d70,/* 32 bit Tx GMAC FIFO Read Pointer */
TX_GMF_RSTP = 0x0d74,/* 32 bit Tx GMAC FIFO Restart Pointer */
TX_GMF_RLEV = 0x0d78,/* 32 bit Tx GMAC FIFO Read Level */
+
+ /* Threshold values for Yukon-EC Ultra and Extreme */
+ ECU_AE_THR = 0x0070, /* Almost Empty Threshold */
+ ECU_TXFF_LEV = 0x01a0, /* Tx BMU FIFO Level */
+ ECU_JUMBO_WM = 0x0080, /* Jumbo Mode Watermark */
};
/* Descriptor Poll Timer Registers */
TX_VLAN_TAG_ON = 1<<25,/* enable VLAN tagging */
TX_VLAN_TAG_OFF = 1<<24,/* disable VLAN tagging */
+ TX_JUMBO_ENA = 1<<23,/* PCI Jumbo Mode enable (Yukon-EC Ultra) */
+ TX_JUMBO_DIS = 1<<22,/* PCI Jumbo Mode enable (Yukon-EC Ultra) */
+
GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */
GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */
GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */
SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_NOCS;
spin_unlock_irqrestore(&chain->lock, flags);
- if (skb->protocol == htons(ETH_P_IP))
+ if (skb->protocol == htons(ETH_P_IP) && skb->ip_summed == CHECKSUM_PARTIAL)
switch (skb->nh.iph->protocol) {
case IPPROTO_TCP:
hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
/* XXX - leak? */
MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
+ if (MEM == NULL) {
+#ifdef CONFIG_SUN3
+ iounmap((void __iomem *)ioaddr);
+#endif
+ printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n");
+ return 0;
+ }
lp->iobase = (volatile unsigned short *)ioaddr;
dev->base_addr = (unsigned long)ioaddr; /* informational only */
REGA(CSR0) = CSR0_STOP;
- request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev);
+ if (request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev) < 0) {
+#ifdef CONFIG_SUN3
+ iounmap((void __iomem *)ioaddr);
+#endif
+ dvma_free((void *)MEM);
+ printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n");
+ return 0;
+ }
dev->irq = (unsigned short)LANCE_IRQ;
return &gp->net_stats;
}
+static int gem_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *macaddr = (struct sockaddr *) addr;
+ struct gem *gp = dev->priv;
+ unsigned char *e = &dev->dev_addr[0];
+
+ if (!is_valid_ether_addr(macaddr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ if (!netif_running(dev) || !netif_device_present(dev)) {
+ /* We'll just catch it later when the
+ * device is up'd or resumed.
+ */
+ memcpy(dev->dev_addr, macaddr->sa_data, dev->addr_len);
+ return 0;
+ }
+
+ mutex_lock(&gp->pm_mutex);
+ memcpy(dev->dev_addr, macaddr->sa_data, dev->addr_len);
+ if (gp->running) {
+ writel((e[4] << 8) | e[5], gp->regs + MAC_ADDR0);
+ writel((e[2] << 8) | e[3], gp->regs + MAC_ADDR1);
+ writel((e[0] << 8) | e[1], gp->regs + MAC_ADDR2);
+ }
+ mutex_unlock(&gp->pm_mutex);
+
+ return 0;
+}
+
static void gem_set_multicast(struct net_device *dev)
{
struct gem *gp = dev->priv;
dev->change_mtu = gem_change_mtu;
dev->irq = pdev->irq;
dev->dma = 0;
+ dev->set_mac_address = gem_set_mac_address;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = gem_poll_controller;
#endif
struct happy_meal *hp = dev_get_drvdata(&dev->dev);
struct net_device *net_dev = hp->dev;
- unregister_netdevice(net_dev);
+ unregister_netdev(net_dev);
/* XXX qfe parent interrupt... */
struct lance_private *lp = dev_get_drvdata(&sun4_sdev.ofdev.dev);
struct net_device *net_dev = lp->dev;
- unregister_netdevice(net_dev);
+ unregister_netdev(net_dev);
lance_free_hwresources(lp);
struct lance_private *lp = dev_get_drvdata(&dev->dev);
struct net_device *net_dev = lp->dev;
- unregister_netdevice(net_dev);
+ unregister_netdev(net_dev);
lance_free_hwresources(lp);
if (!dev)
return -ENOMEM;
+ memcpy(dev->dev_addr, idprom->id_ethaddr, 6);
+
qe = netdev_priv(dev);
i = of_getintprop_default(sdev->ofdev.node, "channel#", -1);
struct sunqe *qp = dev_get_drvdata(&dev->dev);
struct net_device *net_dev = qp->dev;
- unregister_netdevice(net_dev);
+ unregister_netdev(net_dev);
sbus_iounmap(qp->qcregs, CREG_REG_SIZE);
sbus_iounmap(qp->mregs, MREGS_REG_SIZE);
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.74"
-#define DRV_MODULE_RELDATE "February 20, 2007"
+#define DRV_MODULE_VERSION "3.75"
+#define DRV_MODULE_RELDATE "March 23, 2007"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
* Reading the PCI State register will confirm whether the
* interrupt is ours and will flush the status block.
*/
- if ((sblk->status & SD_STATUS_UPDATED) ||
- !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
- /*
- * Writing any value to intr-mbox-0 clears PCI INTA# and
- * chip-internal interrupt pending events.
- * Writing non-zero to intr-mbox-0 additional tells the
- * NIC to stop sending us irqs, engaging "in-intr-handler"
- * event coalescing.
- */
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- 0x00000001);
- if (tg3_irq_sync(tp))
+ if (unlikely(!(sblk->status & SD_STATUS_UPDATED))) {
+ if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
+ (tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
+ handled = 0;
goto out;
- sblk->status &= ~SD_STATUS_UPDATED;
- if (likely(tg3_has_work(tp))) {
- prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
- netif_rx_schedule(dev); /* schedule NAPI poll */
- } else {
- /* No work, shared interrupt perhaps? re-enable
- * interrupts, and flush that PCI write
- */
- tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- 0x00000000);
}
- } else { /* shared interrupt */
- handled = 0;
+ }
+
+ /*
+ * Writing any value to intr-mbox-0 clears PCI INTA# and
+ * chip-internal interrupt pending events.
+ * Writing non-zero to intr-mbox-0 additional tells the
+ * NIC to stop sending us irqs, engaging "in-intr-handler"
+ * event coalescing.
+ */
+ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
+ if (tg3_irq_sync(tp))
+ goto out;
+ sblk->status &= ~SD_STATUS_UPDATED;
+ if (likely(tg3_has_work(tp))) {
+ prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
+ netif_rx_schedule(dev); /* schedule NAPI poll */
+ } else {
+ /* No work, shared interrupt perhaps? re-enable
+ * interrupts, and flush that PCI write
+ */
+ tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+ 0x00000000);
}
out:
return IRQ_RETVAL(handled);
* Reading the PCI State register will confirm whether the
* interrupt is ours and will flush the status block.
*/
- if ((sblk->status_tag != tp->last_tag) ||
- !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
- /*
- * writing any value to intr-mbox-0 clears PCI INTA# and
- * chip-internal interrupt pending events.
- * writing non-zero to intr-mbox-0 additional tells the
- * NIC to stop sending us irqs, engaging "in-intr-handler"
- * event coalescing.
- */
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- 0x00000001);
- if (tg3_irq_sync(tp))
+ if (unlikely(sblk->status_tag == tp->last_tag)) {
+ if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
+ (tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
+ handled = 0;
goto out;
- if (netif_rx_schedule_prep(dev)) {
- prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
- /* Update last_tag to mark that this status has been
- * seen. Because interrupt may be shared, we may be
- * racing with tg3_poll(), so only update last_tag
- * if tg3_poll() is not scheduled.
- */
- tp->last_tag = sblk->status_tag;
- __netif_rx_schedule(dev);
}
- } else { /* shared interrupt */
- handled = 0;
+ }
+
+ /*
+ * writing any value to intr-mbox-0 clears PCI INTA# and
+ * chip-internal interrupt pending events.
+ * writing non-zero to intr-mbox-0 additional tells the
+ * NIC to stop sending us irqs, engaging "in-intr-handler"
+ * event coalescing.
+ */
+ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
+ if (tg3_irq_sync(tp))
+ goto out;
+ if (netif_rx_schedule_prep(dev)) {
+ prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
+ /* Update last_tag to mark that this status has been
+ * seen. Because interrupt may be shared, we may be
+ * racing with tg3_poll(), so only update last_tag
+ * if tg3_poll() is not scheduled.
+ */
+ tp->last_tag = sblk->status_tag;
+ __netif_rx_schedule(dev);
}
out:
return IRQ_RETVAL(handled);
if (write_op == tg3_write_flush_reg32)
tp->write32 = tg3_write32;
+ /* Prevent the irq handler from reading or writing PCI registers
+ * during chip reset when the memory enable bit in the PCI command
+ * register may be cleared. The chip does not generate interrupt
+ * at this time, but the irq handler may still be called due to irq
+ * sharing or irqpoll.
+ */
+ tp->tg3_flags |= TG3_FLAG_CHIP_RESETTING;
+ if (tp->hw_status) {
+ tp->hw_status->status = 0;
+ tp->hw_status->status_tag = 0;
+ }
+ tp->last_tag = 0;
+ smp_mb();
+ synchronize_irq(tp->pdev->irq);
+
/* do the reset */
val = GRC_MISC_CFG_CORECLK_RESET;
pci_restore_state(tp->pdev);
+ tp->tg3_flags &= ~TG3_FLAG_CHIP_RESETTING;
+
/* Make sure PCI-X relaxed ordering bit is clear. */
pci_read_config_dword(tp->pdev, TG3PCI_X_CAPS, &val);
val &= ~PCIX_CAPS_RELAXED_ORDERING;
RDMAC_MODE_ADDROFLOW_ENAB | RDMAC_MODE_FIFOOFLOW_ENAB |
RDMAC_MODE_FIFOURUN_ENAB | RDMAC_MODE_FIFOOREAD_ENAB |
RDMAC_MODE_LNGREAD_ENAB);
- if (tp->tg3_flags & TG3_FLAG_SPLIT_MODE)
- rdmac_mode |= RDMAC_MODE_SPLIT_ENABLE;
/* If statement applies to 5705 and 5750 PCI devices only */
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
val &= ~(PCIX_CAPS_SPLIT_MASK | PCIX_CAPS_BURST_MASK);
val |= (PCIX_CAPS_MAX_BURST_CPIOB << PCIX_CAPS_BURST_SHIFT);
- if (tp->tg3_flags & TG3_FLAG_SPLIT_MODE)
- val |= (tp->split_mode_max_reqs <<
- PCIX_CAPS_SPLIT_SHIFT);
}
tw32(TG3PCI_X_CAPS, val);
}
grc_misc_cfg = tr32(GRC_MISC_CFG);
grc_misc_cfg &= GRC_MISC_CFG_BOARD_ID_MASK;
- /* Broadcom's driver says that CIOBE multisplit has a bug */
-#if 0
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
- grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5704CIOBE) {
- tp->tg3_flags |= TG3_FLAG_SPLIT_MODE;
- tp->split_mode_max_reqs = SPLIT_MODE_5704_MAX_REQ;
- }
-#endif
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
(grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788 ||
grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M))
i == 5 ? '\n' : ':');
printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] "
- "MIirq[%d] ASF[%d] Split[%d] WireSpeed[%d] "
- "TSOcap[%d] \n",
+ "MIirq[%d] ASF[%d] WireSpeed[%d] TSOcap[%d]\n",
dev->name,
(tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
(tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
(tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
- (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
#define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000
-#define TG3_FLAG_SPLIT_MODE 0x40000000
+#define TG3_FLAG_CHIP_RESETTING 0x40000000
#define TG3_FLAG_INIT_COMPLETE 0x80000000
u32 tg3_flags2;
#define TG3_FLG2_RESTART_TIMER 0x00000001
#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
#define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
- u32 split_mode_max_reqs;
-#define SPLIT_MODE_5704_MAX_REQ 3
-
struct timer_list timer;
u16 timer_counter;
u16 timer_multiplier;
if (bd == ugeth->confBd[txQ]) {
if (!netif_queue_stopped(dev))
netif_stop_queue(dev);
- return NETDEV_TX_BUSY;
}
ugeth->txBd[txQ] = bd;
spin_unlock_irq(&ugeth->lock);
- return NETDEV_TX_OK;
+ return 0;
}
static int ucc_geth_rx(struct ucc_geth_private *ugeth, u8 rxQ, int rx_work_limit)
+++ /dev/null
-#ifndef _LMC_MEDIA_H_
-#define _LMC_MEDIA_H_
-
-lmc_media_t lmc_ds3_media = {
- lmc_ds3_init, /* special media init stuff */
- lmc_ds3_default, /* reset to default state */
- lmc_ds3_set_status, /* reset status to state provided */
- lmc_dummy_set_1, /* set clock source */
- lmc_dummy_set2_1, /* set line speed */
- lmc_ds3_set_100ft, /* set cable length */
- lmc_ds3_set_scram, /* set scrambler */
- lmc_ds3_get_link_status, /* get link status */
- lmc_dummy_set_1, /* set link status */
- lmc_ds3_set_crc_length, /* set CRC length */
- lmc_dummy_set_1, /* set T1 or E1 circuit type */
- lmc_ds3_watchdog
-};
-
-lmc_media_t lmc_hssi_media = {
- lmc_hssi_init, /* special media init stuff */
- lmc_hssi_default, /* reset to default state */
- lmc_hssi_set_status, /* reset status to state provided */
- lmc_hssi_set_clock, /* set clock source */
- lmc_dummy_set2_1, /* set line speed */
- lmc_dummy_set_1, /* set cable length */
- lmc_dummy_set_1, /* set scrambler */
- lmc_hssi_get_link_status, /* get link status */
- lmc_hssi_set_link_status, /* set link status */
- lmc_hssi_set_crc_length, /* set CRC length */
- lmc_dummy_set_1, /* set T1 or E1 circuit type */
- lmc_hssi_watchdog
-};
-
-lmc_media_t lmc_ssi_media = { lmc_ssi_init, /* special media init stuff */
- lmc_ssi_default, /* reset to default state */
- lmc_ssi_set_status, /* reset status to state provided */
- lmc_ssi_set_clock, /* set clock source */
- lmc_ssi_set_speed, /* set line speed */
- lmc_dummy_set_1, /* set cable length */
- lmc_dummy_set_1, /* set scrambler */
- lmc_ssi_get_link_status, /* get link status */
- lmc_ssi_set_link_status, /* set link status */
- lmc_ssi_set_crc_length, /* set CRC length */
- lmc_dummy_set_1, /* set T1 or E1 circuit type */
- lmc_ssi_watchdog
-};
-
-lmc_media_t lmc_t1_media = {
- lmc_t1_init, /* special media init stuff */
- lmc_t1_default, /* reset to default state */
- lmc_t1_set_status, /* reset status to state provided */
- lmc_t1_set_clock, /* set clock source */
- lmc_dummy_set2_1, /* set line speed */
- lmc_dummy_set_1, /* set cable length */
- lmc_dummy_set_1, /* set scrambler */
- lmc_t1_get_link_status, /* get link status */
- lmc_dummy_set_1, /* set link status */
- lmc_t1_set_crc_length, /* set CRC length */
- lmc_t1_set_circuit_type, /* set T1 or E1 circuit type */
- lmc_t1_watchdog
-};
-
-
-#endif
-
if (rc) {
airo_print_err(dev->name, "register interrupt %d failed, rc %d",
irq, rc);
- goto err_out_unlink;
+ goto err_out_nets;
}
if (!is_pcmcia) {
if (!request_region( dev->base_addr, 64, dev->name )) {
release_region( dev->base_addr, 64 );
err_out_irq:
free_irq(dev->irq, dev);
+err_out_nets:
+ airo_networks_free(ai);
err_out_unlink:
del_airo_dev(dev);
err_out_thr:
u8 channel;
struct bcm43xx_phyinfo *phy;
const char *iso_country;
+ u8 max_bg_channel;
geo = kzalloc(sizeof(*geo), GFP_KERNEL);
if (!geo)
}
iso_country = bcm43xx_locale_iso(bcm->sprom.locale);
+/* set the maximum channel based on locale set in sprom or witle locale option */
+ switch (bcm->sprom.locale) {
+ case BCM43xx_LOCALE_THAILAND:
+ case BCM43xx_LOCALE_ISRAEL:
+ case BCM43xx_LOCALE_JORDAN:
+ case BCM43xx_LOCALE_USA_CANADA_ANZ:
+ case BCM43xx_LOCALE_USA_LOW:
+ max_bg_channel = 11;
+ break;
+ case BCM43xx_LOCALE_JAPAN:
+ case BCM43xx_LOCALE_JAPAN_HIGH:
+ max_bg_channel = 14;
+ break;
+ default:
+ max_bg_channel = 13;
+ }
+
if (have_a) {
for (i = 0, channel = IEEE80211_52GHZ_MIN_CHANNEL;
channel <= IEEE80211_52GHZ_MAX_CHANNEL; channel++) {
}
if (have_bg) {
for (i = 0, channel = IEEE80211_24GHZ_MIN_CHANNEL;
- channel <= IEEE80211_24GHZ_MAX_CHANNEL; channel++) {
+ channel <= max_bg_channel; channel++) {
chan = &geo->bg[i++];
chan->freq = bcm43xx_channel_to_freq_bg(channel);
chan->channel = channel;
if (radio->version == 0x2050)
bcm43xx_phy_write(bcm, 0x0038, 0x0667);
- if (phy->type == BCM43xx_PHYTYPE_G) {
+ if (phy->connected) {
if (radio->version == 0x2050) {
bcm43xx_radio_write16(bcm, 0x007A,
bcm43xx_radio_read16(bcm, 0x007A)
{
struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
- u16 backup_phy[15];
+ u16 backup_phy[15] = {0};
u16 backup_radio[3];
u16 backup_bband;
u16 i;
backup_phy[1] = bcm43xx_phy_read(bcm, 0x0001);
backup_phy[2] = bcm43xx_phy_read(bcm, 0x0811);
backup_phy[3] = bcm43xx_phy_read(bcm, 0x0812);
- backup_phy[4] = bcm43xx_phy_read(bcm, 0x0814);
- backup_phy[5] = bcm43xx_phy_read(bcm, 0x0815);
+ if (phy->rev != 1) {
+ backup_phy[4] = bcm43xx_phy_read(bcm, 0x0814);
+ backup_phy[5] = bcm43xx_phy_read(bcm, 0x0815);
+ }
backup_phy[6] = bcm43xx_phy_read(bcm, 0x005A);
backup_phy[7] = bcm43xx_phy_read(bcm, 0x0059);
backup_phy[8] = bcm43xx_phy_read(bcm, 0x0058);
bcm43xx_phy_read(bcm, 0x0811) | 0x0001);
bcm43xx_phy_write(bcm, 0x0812,
bcm43xx_phy_read(bcm, 0x0812) & 0xFFFE);
- bcm43xx_phy_write(bcm, 0x0814,
- bcm43xx_phy_read(bcm, 0x0814) | 0x0001);
- bcm43xx_phy_write(bcm, 0x0815,
- bcm43xx_phy_read(bcm, 0x0815) & 0xFFFE);
- bcm43xx_phy_write(bcm, 0x0814,
- bcm43xx_phy_read(bcm, 0x0814) | 0x0002);
- bcm43xx_phy_write(bcm, 0x0815,
- bcm43xx_phy_read(bcm, 0x0815) & 0xFFFD);
+ if (phy->rev != 1) {
+ bcm43xx_phy_write(bcm, 0x0814,
+ bcm43xx_phy_read(bcm, 0x0814) | 0x0001);
+ bcm43xx_phy_write(bcm, 0x0815,
+ bcm43xx_phy_read(bcm, 0x0815) & 0xFFFE);
+ bcm43xx_phy_write(bcm, 0x0814,
+ bcm43xx_phy_read(bcm, 0x0814) | 0x0002);
+ bcm43xx_phy_write(bcm, 0x0815,
+ bcm43xx_phy_read(bcm, 0x0815) & 0xFFFD);
+ }
bcm43xx_phy_write(bcm, 0x0811,
bcm43xx_phy_read(bcm, 0x0811) | 0x000C);
bcm43xx_phy_write(bcm, 0x0812,
bcm43xx_phy_read(bcm, 0x000A)
| 0x2000);
}
- bcm43xx_phy_write(bcm, 0x0814,
- bcm43xx_phy_read(bcm, 0x0814) | 0x0004);
- bcm43xx_phy_write(bcm, 0x0815,
- bcm43xx_phy_read(bcm, 0x0815) & 0xFFFB);
+ if (phy->rev != 1) {
+ bcm43xx_phy_write(bcm, 0x0814,
+ bcm43xx_phy_read(bcm, 0x0814) | 0x0004);
+ bcm43xx_phy_write(bcm, 0x0815,
+ bcm43xx_phy_read(bcm, 0x0815) & 0xFFFB);
+ }
bcm43xx_phy_write(bcm, 0x0003,
(bcm43xx_phy_read(bcm, 0x0003)
& 0xFF9F) | 0x0040);
}
}
- bcm43xx_phy_write(bcm, 0x0814, backup_phy[4]);
- bcm43xx_phy_write(bcm, 0x0815, backup_phy[5]);
+ if (phy->rev != 1) {
+ bcm43xx_phy_write(bcm, 0x0814, backup_phy[4]);
+ bcm43xx_phy_write(bcm, 0x0815, backup_phy[5]);
+ }
bcm43xx_phy_write(bcm, 0x005A, backup_phy[6]);
bcm43xx_phy_write(bcm, 0x0059, backup_phy[7]);
bcm43xx_phy_write(bcm, 0x0058, backup_phy[8]);
bcm43xx_phy_write(bcm, 0x0811, 0x0000);
bcm43xx_phy_write(bcm, 0x0015, 0x00C0);
}
- if (phy->rev >= 3) {
+ if (phy->rev > 5) {
bcm43xx_phy_write(bcm, 0x0811, 0x0400);
bcm43xx_phy_write(bcm, 0x0015, 0x00C0);
}
- if (phy->connected) {
+ if (phy->rev >= 2 && phy->connected) {
tmp = bcm43xx_phy_read(bcm, 0x0400) & 0xFF;
- if (tmp < 6) {
+ if (tmp ==3 || tmp == 5) {
bcm43xx_phy_write(bcm, 0x04C2, 0x1816);
bcm43xx_phy_write(bcm, 0x04C3, 0x8006);
- if (tmp != 3) {
+ if (tmp == 5) {
bcm43xx_phy_write(bcm, 0x04CC,
(bcm43xx_phy_read(bcm, 0x04CC)
& 0x00FF) | 0x1F00);
}
}
- }
- if (phy->rev < 3 && phy->connected)
bcm43xx_phy_write(bcm, 0x047E, 0x0078);
+ }
if (radio->revision == 8) {
bcm43xx_phy_write(bcm, 0x0801, bcm43xx_phy_read(bcm, 0x0801) | 0x0080);
bcm43xx_phy_write(bcm, 0x043E, bcm43xx_phy_read(bcm, 0x043E) | 0x0004);
if (phy->rev >= 6) {
bcm43xx_phy_write(bcm, 0x0036,
(bcm43xx_phy_read(bcm, 0x0036)
- & 0xF000) | (radio->txctl2 << 12));
+ & 0x0FFF) | (radio->txctl2 << 12));
}
if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL)
bcm43xx_phy_write(bcm, 0x002E, 0x8075);
else
bcm43xx_phy_write(bcm, 0x002F, 0x0202);
}
- if (phy->connected) {
+ if (phy->connected || phy->rev >= 2) {
bcm43xx_phy_lo_adjust(bcm, 0);
bcm43xx_phy_write(bcm, 0x080F, 0x8078);
}
*/
bcm43xx_nrssi_hw_update(bcm, 0xFFFF);
bcm43xx_calc_nrssi_threshold(bcm);
- } else if (phy->connected) {
+ } else if (phy->connected || phy->rev >= 2) {
if (radio->nrssi[0] == -1000) {
assert(radio->nrssi[1] == -1000);
bcm43xx_calc_nrssi_slope(bcm);
bcm43xx_phy_write(bcm, 0x005A, 0x0480);
bcm43xx_phy_write(bcm, 0x0059, 0x0810);
bcm43xx_phy_write(bcm, 0x0058, 0x000D);
- if (phy->rev == 0) {
+ if (phy->analog == 0) {
bcm43xx_phy_write(bcm, 0x0003, 0x0122);
} else {
bcm43xx_phy_write(bcm, 0x000A,
nrssi0 = (s16)bcm43xx_phy_read(bcm, 0x0027);
bcm43xx_radio_write16(bcm, 0x007A,
bcm43xx_radio_read16(bcm, 0x007A) & 0x007F);
- if (phy->rev >= 2) {
+ if (phy->analog >= 2) {
bcm43xx_write16(bcm, 0x03E6, 0x0040);
- } else if (phy->rev == 0) {
+ } else if (phy->analog == 0) {
bcm43xx_write16(bcm, 0x03E6, 0x0122);
} else {
bcm43xx_write16(bcm, BCM43xx_MMIO_CHANNEL_EXT,
bcm43xx_phy_write(bcm, 0x0015, backup[5]);
bcm43xx_phy_write(bcm, 0x002A, backup[6]);
bcm43xx_synth_pu_workaround(bcm, radio->channel);
- if (phy->rev != 0)
+ if (phy->analog != 0)
bcm43xx_write16(bcm, 0x03F4, backup[13]);
bcm43xx_phy_write(bcm, 0x0020, backup[7]);
bcm43xx_radio_write16(bcm, 0x007A,
bcm43xx_radio_read16(bcm, 0x007A) & 0x007F);
- if (phy->rev >= 2) {
+ if (phy->analog >= 2) {
bcm43xx_phy_write(bcm, 0x0003,
(bcm43xx_phy_read(bcm, 0x0003)
& 0xFF9F) | 0x0040);
{
u32 *stackptr = &(_stackptr[*stackidx]);
- assert((offset & 0xF000) == 0x0000);
- assert((id & 0xF0) == 0x00);
+ assert((offset & 0xE000) == 0x0000);
+ assert((id & 0xF8) == 0x00);
*stackptr = offset;
- *stackptr |= ((u32)id) << 12;
+ *stackptr |= ((u32)id) << 13;
*stackptr |= ((u32)value) << 16;
(*stackidx)++;
assert(*stackidx < BCM43xx_INTERFSTACK_SIZE);
{
size_t i;
- assert((offset & 0xF000) == 0x0000);
- assert((id & 0xF0) == 0x00);
+ assert((offset & 0xE000) == 0x0000);
+ assert((id & 0xF8) == 0x00);
for (i = 0; i < BCM43xx_INTERFSTACK_SIZE; i++, stackptr++) {
- if ((*stackptr & 0x00000FFF) != offset)
+ if ((*stackptr & 0x00001FFF) != offset)
continue;
- if (((*stackptr & 0x0000F000) >> 12) != id)
+ if (((*stackptr & 0x00007000) >> 13) != id)
continue;
return ((*stackptr & 0xFFFF0000) >> 16);
}
for (i = 0; i < 5; i++) {
for (j = 0; j < 5; j++) {
- if (tmp == (data_high[i] << 4 | data_low[j])) {
+ if (tmp == (data_high[i] | data_low[j])) {
bcm43xx_phy_write(bcm, 0x0069, (i - j) << 8 | 0x00C0);
return;
}
chip->patch_cr157 = (value >> 13) & 0x1;
chip->patch_6m_band_edge = (value >> 21) & 0x1;
chip->new_phy_layout = (value >> 31) & 0x1;
+ chip->al2230s_bit = (value >> 7) & 0x1;
chip->link_led = ((value >> 4) & 1) ? LED1 : LED2;
chip->supports_tx_led = 1;
if (value & (1 << 24)) { /* LED scenario */
return r;
}
-/* CR157 can be optionally patched by the EEPROM */
+/* CR157 can be optionally patched by the EEPROM for original ZD1211 */
static int patch_cr157(struct zd_chip *chip)
{
int r;
- u32 value;
+ u16 value;
if (!chip->patch_cr157)
return 0;
- r = zd_ioread32_locked(chip, &value, E2P_PHY_REG);
+ r = zd_ioread16_locked(chip, &value, E2P_PHY_REG);
if (r)
return r;
goto out;
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
- if (r)
- goto unlock;
-
- r = patch_cr157(chip);
-unlock:
t = zd_chip_unlock_phy_regs(chip);
if (t && !r)
r = t;
* also only 11 channels. */
#define E2P_ALLOWED_CHANNEL E2P_DATA(0x18)
-#define E2P_PHY_REG E2P_DATA(0x1a)
#define E2P_DEVICE_VER E2P_DATA(0x20)
+#define E2P_PHY_REG E2P_DATA(0x25)
#define E2P_36M_CAL_VALUE1 E2P_DATA(0x28)
#define E2P_36M_CAL_VALUE2 E2P_DATA(0x2a)
#define E2P_36M_CAL_VALUE3 E2P_DATA(0x2c)
u16 link_led;
unsigned int pa_type:4,
patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1,
- new_phy_layout:1,
+ new_phy_layout:1, al2230s_bit:1,
is_zd1211b:1, supports_tx_led:1;
};
{
struct zd_chip *chip = zd_rf_to_chip(rf);
+ if (chip->al2230s_bit) {
+ dev_err(zd_chip_dev(chip), "AL2230S devices are not yet "
+ "supported by this driver.\n");
+ return -ENODEV;
+ }
+
rf->switch_radio_off = al2230_switch_radio_off;
if (chip->is_zd1211b) {
rf->init_hw = zd1211b_al2230_init_hw;
{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0baf, 0x0121), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{}
int alloc_event_buffer(void)
{
int err = -ENOMEM;
+ unsigned long flags;
- spin_lock(&oprofilefs_lock);
+ spin_lock_irqsave(&oprofilefs_lock, flags);
buffer_size = fs_buffer_size;
buffer_watershed = fs_buffer_watershed;
- spin_unlock(&oprofilefs_lock);
+ spin_unlock_irqrestore(&oprofilefs_lock, flags);
if (buffer_watershed >= buffer_size)
return -EINVAL;
int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count)
{
char tmpbuf[TMPBUFSIZE];
+ unsigned long flags;
if (!count)
return 0;
if (copy_from_user(tmpbuf, buf, count))
return -EFAULT;
- spin_lock(&oprofilefs_lock);
+ spin_lock_irqsave(&oprofilefs_lock, flags);
*val = simple_strtoul(tmpbuf, NULL, 0);
- spin_unlock(&oprofilefs_lock);
+ spin_unlock_irqrestore(&oprofilefs_lock, flags);
return 0;
}
if (!(value_tcr & P_TCR_BUSY))
bits |= PARPORT_STATUS_BUSY;
- dprintk((KERN_DEBUG "tcr 0x%x ir 0x%x\n", regs->p_tcr, regs->p_ir));
+ dprintk((KERN_DEBUG "tcr 0x%x ir 0x%x\n", value_tcr, value_ir));
dprintk((KERN_DEBUG "read status 0x%x\n", bits));
return bits;
}
if (value_or & P_OR_SLCT_IN)
bits |= PARPORT_CONTROL_SELECT;
- dprintk((KERN_DEBUG "tcr 0x%x or 0x%x\n", regs->p_tcr, regs->p_or));
+ dprintk((KERN_DEBUG "tcr 0x%x or 0x%x\n", value_tcr, value_or));
dprintk((KERN_DEBUG "read control 0x%x\n", bits));
return bits;
}
unsigned char value_tcr = sbus_readb(®s->p_tcr);
unsigned char value_or = sbus_readb(®s->p_or);
- dprintk((KERN_DEBUG "frob1: tcr 0x%x or 0x%x\n", regs->p_tcr, regs->p_or));
+ dprintk((KERN_DEBUG "frob1: tcr 0x%x or 0x%x\n",
+ value_tcr, value_or));
if (mask & PARPORT_CONTROL_STROBE) {
if (val & PARPORT_CONTROL_STROBE) {
value_tcr &= ~P_TCR_DS;
sbus_writeb(value_or, ®s->p_or);
sbus_writeb(value_tcr, ®s->p_tcr);
- dprintk((KERN_DEBUG "frob2: tcr 0x%x or 0x%x\n", regs->p_tcr, regs->p_or));
+ dprintk((KERN_DEBUG "frob2: tcr 0x%x or 0x%x\n",
+ value_tcr, value_or));
return parport_sunbpp_read_control(p);
}
int offset = entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
writel(flag, entry->mask_base + offset);
+ readl(entry->mask_base + offset);
break;
}
default:
{
int ret;
+ if (acpi_gbl_FADT.boot_flags & BAF_MSI_NOT_SUPPORTED) {
+ printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n");
+ pci_no_msi();
+ }
ret = register_acpi_bus_type(&acpi_pci_bus);
if (ret)
return 0;
if (!dev->irq && dev->pin) {
printk(KERN_WARNING
"%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n",
- __FUNCTION__, dev->device, dev->vendor);
+ __FUNCTION__, dev->vendor, dev->device);
}
if (pcie_port_device_register(dev)) {
pci_disable_device(dev);
dev->irq = irq;
}
-static void change_legacy_io_resource(struct pci_dev * dev, unsigned index,
- unsigned start, unsigned end)
-{
- unsigned base = start & PCI_BASE_ADDRESS_IO_MASK;
- unsigned len = (end | ~PCI_BASE_ADDRESS_IO_MASK) - base + 1;
-
- /*
- * Some X versions get confused when the BARs reported through
- * /sys or /proc differ from those seen in config space, thus
- * try to update the config space values, too.
- */
- if (!(pci_resource_flags(dev, index) & IORESOURCE_IO))
- printk(KERN_WARNING "%s: cannot adjust BAR%u (not I/O)\n",
- pci_name(dev), index);
- else if (pci_resource_len(dev, index) != len)
- printk(KERN_WARNING "%s: cannot adjust BAR%u (size %04X)\n",
- pci_name(dev), index, (unsigned)pci_resource_len(dev, index));
- else {
- printk(KERN_INFO "%s: trying to change BAR%u from %04X to %04X\n",
- pci_name(dev), index,
- (unsigned)pci_resource_start(dev, index), base);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + index * 4, base);
- }
- pci_resource_start(dev, index) = start;
- pci_resource_end(dev, index) = end;
- pci_resource_flags(dev, index) =
- IORESOURCE_IO | IORESOURCE_PCI_FIXED | PCI_BASE_ADDRESS_SPACE_IO;
-}
+#define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
/**
* pci_setup_device - fill in class and map information of a device
u8 progif;
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
if ((progif & 1) == 0) {
- change_legacy_io_resource(dev, 0, 0x1F0, 0x1F7);
- change_legacy_io_resource(dev, 1, 0x3F6, 0x3F6);
+ dev->resource[0].start = 0x1F0;
+ dev->resource[0].end = 0x1F7;
+ dev->resource[0].flags = LEGACY_IO_RESOURCE;
+ dev->resource[1].start = 0x3F6;
+ dev->resource[1].end = 0x3F6;
+ dev->resource[1].flags = LEGACY_IO_RESOURCE;
}
if ((progif & 4) == 0) {
- change_legacy_io_resource(dev, 2, 0x170, 0x177);
- change_legacy_io_resource(dev, 3, 0x376, 0x376);
+ dev->resource[2].start = 0x170;
+ dev->resource[2].end = 0x177;
+ dev->resource[2].flags = LEGACY_IO_RESOURCE;
+ dev->resource[3].start = 0x376;
+ dev->resource[3].end = 0x376;
+ dev->resource[3].flags = LEGACY_IO_RESOURCE;
}
}
break;
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
+ *
+ * Note that we used to unhide the SMBus that way on Toshiba laptops
+ * (Satellite A40 and Tecra M2) but then found that the thermal management
+ * was done by SMM code, which could cause unsynchronized concurrent
+ * accesses to the SMBus registers, with potentially bad effects. Thus you
+ * should be very careful when adding new entries: if SMM is accessing the
+ * Intel SMBus, this is a very good reason to leave it hidden.
*/
static int asus_hides_smbus;
case 0x099c: /* HP Compaq nx6110 */
asus_hides_smbus = 1;
}
- } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
- if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
- switch(dev->subsystem_device) {
- case 0x0001: /* Toshiba Satellite A40 */
- asus_hides_smbus = 1;
- }
- else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
- switch(dev->subsystem_device) {
- case 0x0001: /* Toshiba Tecra M2 */
- asus_hides_smbus = 1;
- }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
skt->socket.resource_ops = &pccard_static_ops;
skt->socket.ops = &au1x00_pcmcia_operations;
skt->socket.owner = ops->owner;
- skt->socket.dev.dev = dev;
+ skt->socket.dev.parent = dev;
init_timer(&skt->poll_timer);
skt->poll_timer.function = au1x00_pcmcia_poll_event;
* "what chipselect is used". Boards could want more.
*/
-static int __devinit omap_cf_probe(struct device *dev)
+static int __init omap_cf_probe(struct platform_device *pdev)
{
unsigned seg;
struct omap_cf_socket *cf;
- struct platform_device *pdev = to_platform_device(dev);
int irq;
int status;
- seg = (int) dev->platform_data;
+ seg = (int) pdev->dev.platform_data;
if (seg == 0 || seg > 3)
return -ENODEV;
cf->timer.data = (unsigned long) cf;
cf->pdev = pdev;
- dev_set_drvdata(dev, cf);
+ platform_set_drvdata(pdev, cf);
/* this primarily just shuts up irq handling noise */
status = request_irq(irq, omap_cf_irq, IRQF_SHARED,
omap_cf_present() ? "present" : "(not present)");
cf->socket.owner = THIS_MODULE;
- cf->socket.dev.parent = dev;
+ cf->socket.dev.parent = &pdev->dev;
cf->socket.ops = &omap_cf_ops;
cf->socket.resource_ops = &pccard_static_ops;
cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
return status;
}
-static int __devexit omap_cf_remove(struct device *dev)
+static int __exit omap_cf_remove(struct platform_device *pdev)
{
- struct omap_cf_socket *cf = dev_get_drvdata(dev);
+ struct omap_cf_socket *cf = platform_get_drvdata(pdev);
cf->active = 0;
pcmcia_unregister_socket(&cf->socket);
return 0;
}
-static struct device_driver omap_cf_driver = {
- .name = (char *) driver_name,
- .bus = &platform_bus_type,
- .probe = omap_cf_probe,
- .remove = __devexit_p(omap_cf_remove),
- .suspend = pcmcia_socket_dev_suspend,
- .resume = pcmcia_socket_dev_resume,
+static int omap_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+}
+
+static int omap_cf_resume(struct platform_device *pdev)
+{
+ return pcmcia_socket_dev_resume(&pdev->dev);
+}
+
+static struct platform_driver omap_cf_driver = {
+ .driver = {
+ .name = (char *) driver_name,
+ },
+ .remove = __exit_p(omap_cf_remove),
+ .suspend = omap_cf_suspend,
+ .resume = omap_cf_resume,
};
static int __init omap_cf_init(void)
{
if (cpu_is_omap16xx())
- return driver_register(&omap_cf_driver);
+ return platform_driver_probe(&omap_cf_driver, omap_cf_probe);
return -ENODEV;
}
static void __exit omap_cf_exit(void)
{
if (cpu_is_omap16xx())
- driver_unregister(&omap_cf_driver);
+ platform_driver_unregister(&omap_cf_driver);
}
module_init(omap_cf_init);
{ "", 0 }
};
-static void reserve_range(char *pnpid, int start, int end, int port)
+static void reserve_range(const char *pnpid, resource_size_t start, resource_size_t end, int port)
{
struct resource *res;
char *regionid;
return;
snprintf(regionid, 16, "pnp %s", pnpid);
if (port)
- res = request_region(start,end-start+1,regionid);
+ res = request_region(start, end-start+1, regionid);
else
- res = request_mem_region(start,end-start+1,regionid);
+ res = request_mem_region(start, end-start+1, regionid);
if (res == NULL)
kfree(regionid);
else
* have double reservations.
*/
printk(KERN_INFO
- "pnp: %s: %s range 0x%x-0x%x %s reserved\n",
- pnpid, port ? "ioport" : "iomem", start, end,
+ "pnp: %s: %s range 0x%llx-0x%llx %s reserved\n",
+ pnpid, port ? "ioport" : "iomem",
+ (unsigned long long)start, (unsigned long long)end,
NULL != res ? "has been" : "could not be");
}
-static void reserve_resources_of_dev(struct pnp_dev *dev)
+static void reserve_resources_of_dev(const struct pnp_dev *dev)
{
int i;
static const char driver_name[] = "rtc_cmos";
+/* The RTC_INTR register may have e.g. RTC_PF set even if RTC_PIE is clear;
+ * always mask it against the irq enable bits in RTC_CONTROL. Bit values
+ * are the same: PF==PIE, AF=AIE, UF=UIE; so RTC_IRQMASK works with both.
+ */
+#define RTC_IRQMASK (RTC_PF | RTC_AF | RTC_UF)
+
+static inline int is_intr(u8 rtc_intr)
+{
+ if (!(rtc_intr & RTC_IRQF))
+ return 0;
+ return rtc_intr & RTC_IRQMASK;
+}
+
/*----------------------------------------------------------------*/
static int cmos_read_time(struct device *dev, struct rtc_time *t)
rtc_control &= ~RTC_AIE;
CMOS_WRITE(rtc_control, RTC_CONTROL);
rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- if (rtc_intr)
+ rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+ if (is_intr(rtc_intr))
rtc_update_irq(&cmos->rtc->class_dev, 1, rtc_intr);
/* update alarm */
rtc_control |= RTC_AIE;
CMOS_WRITE(rtc_control, RTC_CONTROL);
rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- if (rtc_intr)
+ rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+ if (is_intr(rtc_intr))
rtc_update_irq(&cmos->rtc->class_dev, 1, rtc_intr);
}
}
CMOS_WRITE(rtc_control, RTC_CONTROL);
rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
- if (rtc_intr)
+ rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+ if (is_intr(rtc_intr))
rtc_update_irq(&cmos->rtc->class_dev, 1, rtc_intr);
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
spin_lock(&rtc_lock);
irqstat = CMOS_READ(RTC_INTR_FLAGS);
+ irqstat &= (CMOS_READ(RTC_CONTROL) & RTC_IRQMASK) | RTC_IRQF;
spin_unlock(&rtc_lock);
- if (irqstat) {
- /* NOTE: irqstat may have e.g. RTC_PF set
- * even when RTC_PIE is clear...
- */
+ if (is_intr(irqstat)) {
rtc_update_irq(p, 1, irqstat);
return IRQ_HANDLED;
} else
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
int do_wake = device_may_wakeup(dev);
- unsigned char tmp, irqstat;
+ unsigned char tmp;
/* only the alarm might be a wakeup event source */
spin_lock_irq(&rtc_lock);
cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
+ unsigned char irqstat;
+
if (do_wake)
tmp &= ~(RTC_PIE|RTC_UIE);
else
tmp &= ~(RTC_PIE|RTC_AIE|RTC_UIE);
CMOS_WRITE(tmp, RTC_CONTROL);
irqstat = CMOS_READ(RTC_INTR_FLAGS);
- } else
- irqstat = 0;
+ irqstat &= (tmp & RTC_IRQMASK) | RTC_IRQF;
+ if (is_intr(irqstat))
+ rtc_update_irq(&cmos->rtc->class_dev, 1, irqstat);
+ }
spin_unlock_irq(&rtc_lock);
- if (irqstat)
- rtc_update_irq(&cmos->rtc->class_dev, 1, irqstat);
-
/* ACPI HOOK: enable ACPI_EVENT_RTC when (tmp & RTC_AIE)
* ... it'd be best if we could do that under rtc_lock.
*/
spin_lock_irq(&rtc_lock);
CMOS_WRITE(tmp, RTC_CONTROL);
tmp = CMOS_READ(RTC_INTR_FLAGS);
- spin_unlock_irq(&rtc_lock);
- if (tmp)
+ tmp &= (cmos->suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
+ if (is_intr(tmp))
rtc_update_irq(&cmos->rtc->class_dev, 1, tmp);
+ spin_unlock_irq(&rtc_lock);
}
pr_debug("%s: resume, ctrl %02x\n",
/*----------------------------------------------------------------*/
/* The "CMOS" RTC normally lives on the platform_bus. On ACPI systems,
- * the device node may alternatively be created as a PNP device.
+ * the device node will always be created as a PNPACPI device.
*/
#ifdef CONFIG_PNPACPI
/*----------------------------------------------------------------*/
/* Platform setup should have set up an RTC device, when PNPACPI is
- * unavailable ... this is the normal case, common even on PCs.
+ * unavailable ... this could happen even on (older) PCs.
*/
static int __init cmos_platform_probe(struct platform_device *pdev)
* resulting condition code and DIAG return code. */
static inline int dia250(void *iob, int cmd)
{
- register unsigned long reg0 asm ("0") = (unsigned long) iob;
+ register unsigned long reg2 asm ("2") = (unsigned long) iob;
typedef union {
struct dasd_diag_init_io init_io;
struct dasd_diag_rw_io rw_io;
rc = 3;
asm volatile(
- " diag 0,%2,0x250\n"
+ " diag 2,%2,0x250\n"
"0: ipm %0\n"
" srl %0,28\n"
- " or %0,1\n"
+ " or %0,3\n"
"1:\n"
EX_TABLE(0b,1b)
: "+d" (rc), "=m" (*(addr_type *) iob)
- : "d" (cmd), "d" (reg0), "m" (*(addr_type *) iob)
- : "1", "cc");
+ : "d" (cmd), "d" (reg2), "m" (*(addr_type *) iob)
+ : "3", "cc");
return rc;
}
cdev_irb = &cdev->private->irb;
+ /*
+ * If the clear function had been performed, all formerly pending
+ * status at the subchannel has been cleared and we must not pass
+ * intermediate accumulated status to the device driver.
+ */
+ if (irb->scsw.fctl & SCSW_FCTL_CLEAR_FUNC)
+ memset(&cdev->private->irb, 0, sizeof(struct irb));
+
/* Copy bits which are valid only for the start function. */
if (irb->scsw.fctl & SCSW_FCTL_START_FUNC) {
/* Copy key. */
cdev_irb->scsw.cpa = irb->scsw.cpa;
/* Accumulate device status, but not the device busy flag. */
cdev_irb->scsw.dstat &= ~DEV_STAT_BUSY;
- cdev_irb->scsw.dstat |= irb->scsw.dstat;
+ /* dstat is not always valid. */
+ if (irb->scsw.stctl &
+ (SCSW_STCTL_PRIM_STATUS | SCSW_STCTL_SEC_STATUS
+ | SCSW_STCTL_INTER_STATUS | SCSW_STCTL_ALERT_STATUS))
+ cdev_irb->scsw.dstat |= irb->scsw.dstat;
/* Accumulate subchannel status. */
cdev_irb->scsw.cstat |= irb->scsw.cstat;
/* Copy residual count if it is valid. */
spin_lock_bh(&ap_device_lock);
list_del_init(&ap_dev->list);
spin_unlock_bh(&ap_device_lock);
+ spin_lock_bh(&ap_dev->lock);
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
+ spin_unlock_bh(&ap_dev->lock);
return 0;
}
(void *)(unsigned long)qid,
__ap_scan_bus);
rc = ap_query_queue(qid, &queue_depth, &device_type);
- if (dev && rc) {
- put_device(dev);
- device_unregister(dev);
- continue;
+ if (dev) {
+ ap_dev = to_ap_dev(dev);
+ spin_lock_bh(&ap_dev->lock);
+ if (rc || ap_dev->unregistered) {
+ spin_unlock_bh(&ap_dev->lock);
+ put_device(dev);
+ device_unregister(dev);
+ continue;
+ } else
+ spin_unlock_bh(&ap_dev->lock);
}
if (dev) {
put_device(dev);
case AP_RESPONSE_NO_PENDING_REPLY:
if (status.queue_empty) {
/* The card shouldn't forget requests but who knows. */
+ atomic_sub(ap_dev->queue_count, &ap_poll_requests);
ap_dev->queue_count = 0;
list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
ap_dev->requestq_count += ap_dev->pendingq_count;
ap_dev->unregistered = 1;
} else {
ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
- rc = 0;
+ rc = -ENODEV;
}
spin_unlock_bh(&ap_dev->lock);
if (rc == -ENODEV)
*/
static int __ap_poll_all(struct ap_device *ap_dev, unsigned long *flags)
{
- int rc;
-
spin_lock(&ap_dev->lock);
if (!ap_dev->unregistered) {
- rc = ap_poll_queue(ap_dev, flags);
- if (rc)
+ if (ap_poll_queue(ap_dev, flags))
ap_dev->unregistered = 1;
- } else
- rc = 0;
+ }
spin_unlock(&ap_dev->lock);
- if (rc)
- device_unregister(&ap_dev->device);
return 0;
}
#ifdef CONFIG_PCI
struct pci_dev *pdev;
struct pcidev_cookie *pcp;
- pdev = pci_find_slot (((int *) op->oprom_array)[0],
+ pdev = pci_get_bus_and_slot (((int *) op->oprom_array)[0],
((int *) op->oprom_array)[1]);
pcp = pdev->sysdata;
op->oprom_size = sizeof(int);
err = copyout(argp, op, bufsize + sizeof(int));
}
+ pci_dev_put(pdev);
#endif
}
if (copy_from_user(&inout, argp, sizeof(inout)))
return -EFAULT;
- buffer = kmalloc(inout.len, GFP_KERNEL);
+ buffer = kzalloc(inout.len, GFP_KERNEL);
if (buffer == NULL)
return -ENOMEM;
- memset(buffer,0,inout.len);
vfc_lock_device(dev);
inout.ret=
vfc_i2c_recvbuf(dev,inout.addr & 0xff
/* This function will handle the request sense scsi command */
static int tw_scsiop_request_sense(TW_Device_Extension *tw_dev, int request_id)
{
+ char request_buffer[18];
+
dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_request_sense()\n");
- /* For now we just zero the request buffer */
- memset(tw_dev->srb[request_id]->request_buffer, 0, tw_dev->srb[request_id]->request_bufflen);
+ memset(request_buffer, 0, sizeof(request_buffer));
+ request_buffer[0] = 0x70; /* Immediate fixed format */
+ request_buffer[7] = 10; /* minimum size per SPC: 18 bytes */
+ /* leave all other fields zero, giving effectively NO_SENSE return */
+ tw_transfer_internal(tw_dev, request_id, request_buffer,
+ sizeof(request_buffer));
+
tw_dev->state[request_id] = TW_S_COMPLETED;
tw_state_request_finish(tw_dev, request_id);
cmdp->u.raw64.direction =
gdth_direction_tab[scp->cmnd[0]]==DOU ? GDTH_DATA_OUT:GDTH_DATA_IN;
memcpy(cmdp->u.raw64.cmd,scp->cmnd,16);
+ cmdp->u.raw64.sg_ranz = 0;
} else {
cmdp->u.raw.reserved = 0;
cmdp->u.raw.mdisc_time = 0;
cmdp->u.raw.direction =
gdth_direction_tab[scp->cmnd[0]]==DOU ? GDTH_DATA_OUT:GDTH_DATA_IN;
memcpy(cmdp->u.raw.cmd,scp->cmnd,12);
+ cmdp->u.raw.sg_ranz = 0;
}
if (scp->use_sg) {
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
- if (state == pci_channel_io_perm_failure) {
- lpfc_pci_remove_one(pdev);
+ if (state == pci_channel_io_perm_failure)
return PCI_ERS_RESULT_DISCONNECT;
- }
+
pci_disable_device(pdev);
/*
* There may be I/Os dropped by the firmware.
(struct scatterlist *)Cmnd->request_buffer,
Cmnd->use_sg,
Cmnd->sc_data_direction);
- } else {
+ } else if (Cmnd->request_bufflen) {
sbus_unmap_single(qpti->sdev,
(__u32)((unsigned long)Cmnd->SCp.ptr),
Cmnd->request_bufflen,
*/
if (copy_sense) {
if (!SCSI_SENSE_VALID(scmd)) {
- memcpy(scmd->sense_buffer, scmd->request_buffer,
+ memcpy(scmd->sense_buffer, page_address(sgl.page),
sizeof(scmd->sense_buffer));
}
__free_page(sgl.page);
{
unsigned int status = serial_in(up, UART_MSR);
- if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI) {
+ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
+ up->port.info != NULL) {
if (status & UART_MSR_TERI)
up->port.icount.rng++;
if (status & UART_MSR_DDSR)
serial8250_handle_port(struct uart_8250_port *up)
{
unsigned int status;
+ unsigned long flags;
- spin_lock(&up->port.lock);
+ spin_lock_irqsave(&up->port.lock, flags);
status = serial_inp(up, UART_LSR);
if (status & UART_LSR_THRE)
transmit_chars(up);
- spin_unlock(&up->port.lock);
+ spin_unlock_irqrestore(&up->port.lock, flags);
}
/*
{ "FUJ02B8", 0 },
{ "FUJ02B9", 0 },
{ "FUJ02BC", 0 },
+ /* Fujitsu Wacom Tablet PC devices */
+ { "FUJ02E5", 0 },
+ { "FUJ02E6", 0 },
/* Rockwell's (PORALiNK) 33600 INT PNP */
{ "WCI0003", 0 },
/* Unkown PnP modems */
}
}
-static int __init get_port_memory(struct icom_port *icom_port)
+static int __devinit get_port_memory(struct icom_port *icom_port)
{
int index;
unsigned long stgAddr;
0x8024 + 2 - 2 * (icom_port->port - 2);
}
}
-static int __init icom_load_ports(struct icom_adapter *icom_adapter)
+static int __devinit icom_load_ports(struct icom_adapter *icom_adapter)
{
struct icom_port *icom_port;
int port_num;
}
}
- free_irq(icom_adapter->irq_number, (void *) icom_adapter);
+ free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
iounmap(icom_adapter->base_addr);
icom_free_adapter(icom_adapter);
pci_release_regions(icom_adapter->pci_dev);
}
icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
- icom_adapter->irq_number = dev->irq;
icom_adapter->pci_dev = dev;
icom_adapter->version = ent->driver_data;
icom_adapter->subsystem_id = ent->subdevice;
icom_port = &icom_adapter->port_info[index];
if (icom_port->status == ICOM_PORT_ACTIVE) {
- icom_port->uart_port.irq = icom_port->adapter->irq_number;
+ icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq;
icom_port->uart_port.type = PORT_ICOM;
icom_port->uart_port.iotype = UPIO_MEM;
icom_port->uart_port.membase =
struct icom_adapter {
void __iomem * base_addr;
unsigned long base_addr_pci;
- unsigned char irq_number;
struct pci_dev *pci_dev;
struct icom_port port_info[4];
int index;
* this is exported so that for example a USB or parport based adapter
* driver could add devices (which it would learn about out-of-band).
*/
-struct spi_device *__init_or_module
-spi_new_device(struct spi_master *master, struct spi_board_info *chip)
+struct spi_device *spi_new_device(struct spi_master *master,
+ struct spi_board_info *chip)
{
struct spi_device *proxy;
struct device *dev = master->cdev.dev;
* the master's methods before calling spi_register_master(); and (after errors
* adding the device) calling spi_master_put() to prevent a memory leak.
*/
-struct spi_master * __init_or_module
-spi_alloc_master(struct device *dev, unsigned size)
+struct spi_master *spi_alloc_master(struct device *dev, unsigned size)
{
struct spi_master *master;
* After a successful return, the caller is responsible for calling
* spi_unregister_master().
*/
-int __init_or_module
-spi_register_master(struct spi_master *master)
+int spi_register_master(struct spi_master *master)
{
static atomic_t dyn_bus_id = ATOMIC_INIT((1<<16) - 1);
struct device *dev = master->cdev.dev;
switch (value) {
case BITBANG_CS_INACTIVE:
- hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol^1);
+ hw->set_cs(hw->pdata, spi->chip_select, cspol^1);
break;
case BITBANG_CS_ACTIVE:
/* write new configration */
writeb(spcon, hw->regs + S3C2410_SPCON);
- hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol);
+ hw->set_cs(hw->pdata, spi->chip_select, cspol);
break;
}
#include <asm/dec/machtype.h>
#include <asm/dec/serial.h>
#include <asm/dec/system.h>
-#include <asm/dec/tc.h>
#ifdef CONFIG_KGDB
#include <asm/kgdb.h>
static const struct usb_device_id usb_quirk_list[] = {
/* HP 5300/5370C scanner */
{ USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
-
+ /* Seiko Epson Corp - Perfection 1670 */
+ { USB_DEVICE(0x04b8, 0x011f), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
/* Elsa MicroLink 56k (V.250) */
{ USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
/*-------------------------------------------------------------------------*/
+/*
+ * dma-coherent memory allocation (for dma-capable endpoints)
+ *
+ * NOTE: the dma_*_coherent() API calls suck. Most implementations are
+ * (a) page-oriented, so small buffers lose big; and (b) asymmetric with
+ * respect to calls with irqs disabled: alloc is safe, free is not.
+ * We currently work around (b), but not (a).
+ */
+
static void *
omap_alloc_buffer(
struct usb_ep *_ep,
void *retval;
struct omap_ep *ep;
+ if (!_ep)
+ return NULL;
+
ep = container_of(_ep, struct omap_ep, ep);
if (use_dma && ep->has_dma) {
static int warned;
return retval;
}
+static DEFINE_SPINLOCK(buflock);
+static LIST_HEAD(buffers);
+
+struct free_record {
+ struct list_head list;
+ struct device *dev;
+ unsigned bytes;
+ dma_addr_t dma;
+};
+
+static void do_free(unsigned long ignored)
+{
+ spin_lock_irq(&buflock);
+ while (!list_empty(&buffers)) {
+ struct free_record *buf;
+
+ buf = list_entry(buffers.next, struct free_record, list);
+ list_del(&buf->list);
+ spin_unlock_irq(&buflock);
+
+ dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma);
+
+ spin_lock_irq(&buflock);
+ }
+ spin_unlock_irq(&buflock);
+}
+
+static DECLARE_TASKLET(deferred_free, do_free, 0);
+
static void omap_free_buffer(
struct usb_ep *_ep,
void *buf,
unsigned bytes
)
{
- struct omap_ep *ep;
+ if (!_ep) {
+ WARN_ON(1);
+ return;
+ }
- ep = container_of(_ep, struct omap_ep, ep);
- if (use_dma && _ep && ep->has_dma)
- dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma);
- else
- kfree (buf);
+ /* free memory into the right allocator */
+ if (dma != DMA_ADDR_INVALID) {
+ struct omap_ep *ep;
+ struct free_record *rec = buf;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct omap_ep, ep);
+
+ rec->dev = ep->udc->gadget.dev.parent;
+ rec->bytes = bytes;
+ rec->dma = dma;
+
+ spin_lock_irqsave(&buflock, flags);
+ list_add_tail(&rec->list, &buffers);
+ tasklet_schedule(&deferred_free);
+ spin_unlock_irqrestore(&buflock, flags);
+ } else
+ kfree(buf);
}
/*-------------------------------------------------------------------------*/
udc->ep0_pending = 0;
break;
case USB_REQ_GET_STATUS:
+ /* USB_ENDPOINT_HALT status? */
+ if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
+ goto intf_status;
+
+ /* ep0 never stalls */
+ if (!(w_index & 0xf))
+ goto zero_status;
+
+ /* only active endpoints count */
+ ep = &udc->ep[w_index & 0xf];
+ if (w_index & USB_DIR_IN)
+ ep += 16;
+ if (!ep->desc)
+ goto do_stall;
+
+ /* iso never stalls */
+ if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+ goto zero_status;
+
+ /* FIXME don't assume non-halted endpoints!! */
+ ERR("%s status, can't report\n", ep->ep.name);
+ goto do_stall;
+
+intf_status:
/* return interface status. if we were pedantic,
* we'd detect non-existent interfaces, and stall.
*/
if (u.r.bRequestType
!= (USB_DIR_IN|USB_RECIP_INTERFACE))
goto delegate;
+
+zero_status:
/* return two zero bytes */
UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
UDC_DATA_REG = 0;
/*-------------------------------------------------------------------------*/
-static inline int machine_needs_vbus_session(void)
+static inline int machine_without_vbus_sense(void)
{
return (machine_is_omap_innovator()
|| machine_is_omap_osk()
/* boards that don't have VBUS sensing can't autogate 48MHz;
* can't enter deep sleep while a gadget driver is active.
*/
- if (machine_needs_vbus_session())
+ if (machine_without_vbus_sense())
omap_vbus_session(&udc->gadget, 1);
done:
if (udc->dc_clk != NULL)
omap_udc_enable_clock(1);
- if (machine_needs_vbus_session())
+ if (machine_without_vbus_sense())
omap_vbus_session(&udc->gadget, 0);
if (udc->transceiver)
hmc = HMC_1510;
type = "(unknown)";
- if (machine_is_omap_innovator() || machine_is_sx1()) {
+ if (machine_without_vbus_sense()) {
/* just set up software VBUS detect, and then
* later rig it so we always report VBUS.
* FIXME without really sensing VBUS, we can't
*/
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
+ mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
}
return out - buf;
}
-static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
+static int uhci_show_qh(struct uhci_hcd *uhci,
+ struct uhci_qh *qh, char *buf, int len, int space)
{
char *out = buf;
int i, nurbs;
if (list_empty(&qh->queue)) {
out += sprintf(out, "%*s queue is empty\n", space, "");
+ if (qh == uhci->skel_async_qh)
+ out += uhci_show_td(uhci->term_td, out,
+ len - (out - buf), 0);
} else {
struct urb_priv *urbp = list_entry(qh->queue.next,
struct urb_priv, node);
struct list_head *tmp, *head;
int nframes, nerrs;
__le32 link;
+ __le32 fsbr_link;
static const char * const qh_names[] = {
"unlink", "iso", "int128", "int64", "int32", "int16",
out += sprintf(out, "Skeleton QHs\n");
+ fsbr_link = 0;
for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
int cnt = 0;
- __le32 fsbr_link = 0;
qh = uhci->skelqh[i];
out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \
- out += uhci_show_qh(qh, out, len - (out - buf), 4);
+ out += uhci_show_qh(uhci, qh, out, len - (out - buf), 4);
/* Last QH is the Terminating QH, it's different */
if (i == SKEL_TERM) {
if (qh_element(qh) != LINK_TO_TD(uhci->term_td))
out += sprintf(out, " skel_term_qh element is not set to term_td!\n");
- if (link == LINK_TO_QH(uhci->skel_term_qh))
- goto check_qh_link;
- continue;
+ link = fsbr_link;
+ if (!link)
+ link = LINK_TO_QH(uhci->skel_term_qh);
+ goto check_qh_link;
}
head = &qh->node;
qh = list_entry(tmp, struct uhci_qh, node);
tmp = tmp->next;
if (++cnt <= 10)
- out += uhci_show_qh(qh, out,
+ out += uhci_show_qh(uhci, qh, out,
len - (out - buf), 4);
if (!fsbr_link && qh->skel >= SKEL_FSBR)
fsbr_link = LINK_TO_QH(qh);
link = LINK_TO_QH(uhci->skel_async_qh);
else if (!uhci->fsbr_is_on)
;
- else if (fsbr_link)
- link = fsbr_link;
else
link = LINK_TO_QH(uhci->skel_term_qh);
check_qh_link:
static inline void lprintk(char *buf)
{}
-static inline int uhci_show_qh(struct uhci_qh *qh, char *buf,
- int len, int space)
+static inline int uhci_show_qh(struct uhci_hcd *uhci,
+ struct uhci_qh *qh, char *buf, int len, int space)
{
return 0;
}
*/
for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh);
- uhci->skel_async_qh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM;
+ uhci->skel_async_qh->link = UHCI_PTR_TERM;
+ uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh);
/* This dummy TD is to work around a bug in Intel PIIX controllers */
uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
*/
static void uhci_fsbr_on(struct uhci_hcd *uhci)
{
- struct uhci_qh *fsbr_qh, *lqh, *tqh;
+ struct uhci_qh *lqh;
+ /* The terminating skeleton QH always points back to the first
+ * FSBR QH. Make the last async QH point to the terminating
+ * skeleton QH. */
uhci->fsbr_is_on = 1;
lqh = list_entry(uhci->skel_async_qh->node.prev,
struct uhci_qh, node);
-
- /* Find the first FSBR QH. Linear search through the list is
- * acceptable because normally FSBR gets turned on as soon as
- * one QH needs it. */
- fsbr_qh = NULL;
- list_for_each_entry_reverse(tqh, &uhci->skel_async_qh->node, node) {
- if (tqh->skel < SKEL_FSBR)
- break;
- fsbr_qh = tqh;
- }
-
- /* No FSBR QH means we must insert the terminating skeleton QH */
- if (!fsbr_qh) {
- uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh);
- wmb();
- lqh->link = uhci->skel_term_qh->link;
-
- /* Otherwise loop the last QH to the first FSBR QH */
- } else
- lqh->link = LINK_TO_QH(fsbr_qh);
+ lqh->link = LINK_TO_QH(uhci->skel_term_qh);
}
static void uhci_fsbr_off(struct uhci_hcd *uhci)
{
struct uhci_qh *lqh;
+ /* Remove the link from the last async QH to the terminating
+ * skeleton QH. */
uhci->fsbr_is_on = 0;
lqh = list_entry(uhci->skel_async_qh->node.prev,
struct uhci_qh, node);
-
- /* End the async list normally and unlink the terminating QH */
- lqh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM;
+ lqh->link = UHCI_PTR_TERM;
}
static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb)
*/
static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
- struct uhci_qh *pqh, *lqh;
+ struct uhci_qh *pqh;
__le32 link_to_new_qh;
- __le32 *extra_link = &link_to_new_qh;
/* Find the predecessor QH for our new one and insert it in the list.
* The list of QHs is expected to be short, so linear search won't
break;
}
list_add(&qh->node, &pqh->node);
- qh->link = pqh->link;
-
- link_to_new_qh = LINK_TO_QH(qh);
-
- /* If this is now the first FSBR QH, take special action */
- if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR &&
- qh->skel >= SKEL_FSBR) {
- lqh = list_entry(uhci->skel_async_qh->node.prev,
- struct uhci_qh, node);
-
- /* If the new QH is also the last one, we must unlink
- * the terminating skeleton QH and make the new QH point
- * back to itself. */
- if (qh == lqh) {
- qh->link = link_to_new_qh;
- extra_link = &uhci->skel_term_qh->link;
-
- /* Otherwise the last QH must point to the new QH */
- } else
- extra_link = &lqh->link;
- }
/* Link it into the schedule */
+ qh->link = pqh->link;
wmb();
- *extra_link = pqh->link = link_to_new_qh;
+ link_to_new_qh = LINK_TO_QH(qh);
+ pqh->link = link_to_new_qh;
+
+ /* If this is now the first FSBR QH, link the terminating skeleton
+ * QH to it. */
+ if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR)
+ uhci->skel_term_qh->link = link_to_new_qh;
}
/*
*/
static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
- struct uhci_qh *pqh, *lqh;
+ struct uhci_qh *pqh;
__le32 link_to_next_qh = qh->link;
pqh = list_entry(qh->node.prev, struct uhci_qh, node);
-
- /* If this is the first FSBQ QH, take special action */
- if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR &&
- qh->skel >= SKEL_FSBR) {
- lqh = list_entry(uhci->skel_async_qh->node.prev,
- struct uhci_qh, node);
-
- /* If this QH is also the last one, we must link in
- * the terminating skeleton QH. */
- if (qh == lqh) {
- link_to_next_qh = LINK_TO_QH(uhci->skel_term_qh);
- uhci->skel_term_qh->link = link_to_next_qh;
- wmb();
- qh->link = link_to_next_qh;
-
- /* Otherwise the last QH must point to the new first FSBR QH */
- } else
- lqh->link = link_to_next_qh;
- }
-
pqh->link = link_to_next_qh;
+
+ /* If this was the old first FSBR QH, link the terminating skeleton
+ * QH to the next (new first FSBR) QH. */
+ if (pqh->skel < SKEL_FSBR && qh->skel >= SKEL_FSBR)
+ uhci->skel_term_qh->link = link_to_next_qh;
mb();
}
if (debug > 1 && errbuf) {
/* Print the chain for debugging */
- uhci_show_qh(urbp->qh, errbuf,
+ uhci_show_qh(uhci, urbp->qh, errbuf,
ERRBUF_LEN, 0);
lprintk(errbuf);
}
return ret;
}
+/* Returns 0 on success, error on failure */
static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
{
int i;
* d[0].NO_CARRIER kicks in only with failed TX.
* ... so monitoring with MII may be safest.
*/
- if (d[0] & NO_CARRIER)
- netif_carrier_off(net);
- else
- netif_carrier_on(net);
+ if (pegasus->features & TRUST_LINK_STATUS) {
+ if (d[5] & LINK_STATUS)
+ netif_carrier_on(net);
+ else
+ netif_carrier_off(net);
+ } else {
+ /* Never set carrier _on_ based on ! NO_CARRIER */
+ if (d[0] & NO_CARRIER)
+ netif_carrier_off(net);
+ }
/* bytes 3-4 == rx_lostpkt, reg 2E/2F */
pegasus->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
pegasus_t *pegasus = netdev_priv(net);
u16 tmp;
- if (!read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+ if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
return;
if (tmp & BMSR_LSTATUS)
#define PEGASUS_II 0x80000000
#define HAS_HOME_PNA 0x40000000
+#define TRUST_LINK_STATUS 0x20000000
#define PEGASUS_MTU 1536
#define RX_SKBS 4
PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
- DEFAULT_GPIO_RESET | PEGASUS_II )
+ DEFAULT_GPIO_RESET | PEGASUS_II | TRUST_LINK_STATUS )
PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
- { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */
{ USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */
{ },
};
break;
case FT232BM: /* FT232BM chip */
case FT2232C: /* FT2232C chip */
+ case FT232RL:
if (baud <= 3000000) {
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
/* (It might be a BM because of the iSerialNumber bug,
* but it will still work as an AM device.) */
priv->chip_type = FT8U232AM;
- } else {
+ } else if (version < 0x600) {
/* Assume its an FT232BM (or FT245BM) */
priv->chip_type = FT232BM;
+ } else {
+ /* Assume its an FT232R */
+ priv->chip_type = FT232RL;
}
info("Detected %s", ftdi_chip_name[priv->chip_type]);
}
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
-static int generic_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-
static int debug;
#ifdef CONFIG_USB_SERIAL_GENERIC
+
+static int generic_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+
static __u16 vendor = 0x05f9;
static __u16 product = 0xffff;
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Emil Larsson <emil@swip.net> */
+UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0100,
+ "NIKON",
+ "NIKON DSC D80",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* BENQ DC5330
* Reported by Manuel Fombuena <mfombuena@ya.com> and
* Frank Copeland <fjc@thingy.apana.org.au> */
This is particularly important to one driver, matroxfb. If
unsure, say N.
-comment "Frambuffer hardware drivers"
+comment "Frame buffer hardware drivers"
depends on FB
config FB_CIRRUS
* @blank_mode: the blank mode we want.
* @info: frame buffer structure that represents a single frame buffer
*/
-static int
-cg3_blank(int blank, struct fb_info *info)
+static int cg3_blank(int blank, struct fb_info *info)
{
struct cg3_par *par = (struct cg3_par *) info->par;
struct cg3_regs __iomem *regs = par->regs;
* Initialisation
*/
-static void
-cg3_init_fix(struct fb_info *info, int linebytes, struct device_node *dp)
+static void __devinit cg3_init_fix(struct fb_info *info, int linebytes,
+ struct device_node *dp)
{
strlcpy(info->fix.id, dp->name, sizeof(info->fix.id));
info->fix.accel = FB_ACCEL_SUN_CGTHREE;
}
-static void cg3_rdi_maybe_fixup_var(struct fb_var_screeninfo *var,
- struct device_node *dp)
+static void __devinit cg3_rdi_maybe_fixup_var(struct fb_var_screeninfo *var,
+ struct device_node *dp)
{
char *params;
char *p;
}
}
-static u8 cg3regvals_66hz[] __initdata = { /* 1152 x 900, 66 Hz */
+static u8 cg3regvals_66hz[] __devinitdata = { /* 1152 x 900, 66 Hz */
0x14, 0xbb, 0x15, 0x2b, 0x16, 0x04, 0x17, 0x14,
0x18, 0xae, 0x19, 0x03, 0x1a, 0xa8, 0x1b, 0x24,
0x1c, 0x01, 0x1d, 0x05, 0x1e, 0xff, 0x1f, 0x01,
0x10, 0x20, 0
};
-static u8 cg3regvals_76hz[] __initdata = { /* 1152 x 900, 76 Hz */
+static u8 cg3regvals_76hz[] __devinitdata = { /* 1152 x 900, 76 Hz */
0x14, 0xb7, 0x15, 0x27, 0x16, 0x03, 0x17, 0x0f,
0x18, 0xae, 0x19, 0x03, 0x1a, 0xae, 0x1b, 0x2a,
0x1c, 0x01, 0x1d, 0x09, 0x1e, 0xff, 0x1f, 0x01,
0x10, 0x24, 0
};
-static u8 cg3regvals_rdi[] __initdata = { /* 640 x 480, cgRDI */
+static u8 cg3regvals_rdi[] __devinitdata = { /* 640 x 480, cgRDI */
0x14, 0x70, 0x15, 0x20, 0x16, 0x08, 0x17, 0x10,
0x18, 0x06, 0x19, 0x02, 0x1a, 0x31, 0x1b, 0x51,
0x1c, 0x06, 0x1d, 0x0c, 0x1e, 0xff, 0x1f, 0x01,
0x10, 0x22, 0
};
-static u8 *cg3_regvals[] __initdata = {
+static u8 *cg3_regvals[] __devinitdata = {
cg3regvals_66hz, cg3regvals_76hz, cg3regvals_rdi
};
-static u_char cg3_dacvals[] __initdata = {
+static u_char cg3_dacvals[] __devinitdata = {
4, 0xff, 5, 0x00, 6, 0x70, 7, 0x00, 0
};
-static void cg3_do_default_mode(struct cg3_par *par)
+static void __devinit cg3_do_default_mode(struct cg3_par *par)
{
enum cg3_type type;
u8 *p;
return 0;
}
-static int __devinit cg3_probe(struct of_device *dev, const struct of_device_id *match)
+static int __devinit cg3_probe(struct of_device *dev,
+ const struct of_device_id *match)
{
struct of_device *op = to_of_device(&dev->dev);
u32 value2;
};
+#define FFB_DAC_UCTRL 0x1001 /* User Control */
+#define FFB_DAC_UCTRL_MANREV 0x00000f00 /* 4-bit Manufacturing Revision */
+#define FFB_DAC_UCTRL_MANREV_SHIFT 8
+#define FFB_DAC_TGEN 0x6000 /* Timing Generator */
+#define FFB_DAC_TGEN_VIDE 0x00000001 /* Video Enable */
+#define FFB_DAC_DID 0x8000 /* Device Identification */
+#define FFB_DAC_DID_PNUM 0x0ffff000 /* Device Part Number */
+#define FFB_DAC_DID_PNUM_SHIFT 12
+#define FFB_DAC_DID_REV 0xf0000000 /* Device Revision */
+#define FFB_DAC_DID_REV_SHIFT 28
+
+#define FFB_DAC_CUR_CTRL 0x100
+#define FFB_DAC_CUR_CTRL_P0 0x00000001
+#define FFB_DAC_CUR_CTRL_P1 0x00000002
+
struct ffb_par {
spinlock_t lock;
struct ffb_fbc __iomem *fbc;
struct ffb_dac __iomem *dac;
u32 flags;
-#define FFB_FLAG_AFB 0x00000001
-#define FFB_FLAG_BLANKED 0x00000002
+#define FFB_FLAG_AFB 0x00000001 /* AFB m3 or m6 */
+#define FFB_FLAG_BLANKED 0x00000002 /* screen is blanked */
+#define FFB_FLAG_INVCURSOR 0x00000004 /* DAC has inverted cursor logic */
u32 fg_cache __attribute__((aligned (8)));
u32 bg_cache;
unsigned long physbase;
unsigned long fbsize;
- int dac_rev;
int board_type;
};
FFBWait(par);
/* Disable cursor. */
- upa_writel(0x100, &dac->type2);
- if (par->dac_rev <= 2)
+ upa_writel(FFB_DAC_CUR_CTRL, &dac->type2);
+ if (par->flags & FFB_FLAG_INVCURSOR)
upa_writel(0, &dac->value2);
else
- upa_writel(3, &dac->value2);
+ upa_writel((FFB_DAC_CUR_CTRL_P0 |
+ FFB_DAC_CUR_CTRL_P1), &dac->value2);
spin_unlock_irqrestore(&par->lock, flags);
}
struct ffb_par *par = (struct ffb_par *) info->par;
struct ffb_dac __iomem *dac = par->dac;
unsigned long flags;
- u32 tmp;
+ u32 val;
+ int i;
spin_lock_irqsave(&par->lock, flags);
FFBWait(par);
+ upa_writel(FFB_DAC_TGEN, &dac->type);
+ val = upa_readl(&dac->value);
switch (blank) {
case FB_BLANK_UNBLANK: /* Unblanking */
- upa_writel(0x6000, &dac->type);
- tmp = (upa_readl(&dac->value) | 0x1);
- upa_writel(0x6000, &dac->type);
- upa_writel(tmp, &dac->value);
+ val |= FFB_DAC_TGEN_VIDE;
par->flags &= ~FFB_FLAG_BLANKED;
break;
case FB_BLANK_VSYNC_SUSPEND: /* VESA blank (vsync off) */
case FB_BLANK_HSYNC_SUSPEND: /* VESA blank (hsync off) */
case FB_BLANK_POWERDOWN: /* Poweroff */
- upa_writel(0x6000, &dac->type);
- tmp = (upa_readl(&dac->value) & ~0x1);
- upa_writel(0x6000, &dac->type);
- upa_writel(tmp, &dac->value);
+ val &= ~FFB_DAC_TGEN_VIDE;
par->flags |= FFB_FLAG_BLANKED;
break;
}
+ upa_writel(FFB_DAC_TGEN, &dac->type);
+ upa_writel(val, &dac->value);
+ for (i = 0; i < 10; i++) {
+ upa_writel(FFB_DAC_TGEN, &dac->type);
+ upa_readl(&dac->value);
+ }
spin_unlock_irqrestore(&par->lock, flags);
struct ffb_dac __iomem *dac;
struct all_info *all;
int err;
+ u32 dac_pnum, dac_rev, dac_mrev;
all = kzalloc(sizeof(*all), GFP_KERNEL);
if (!all)
if ((upa_readl(&fbc->ucsr) & FFB_UCSR_ALL_ERRORS) != 0)
upa_writel(FFB_UCSR_ALL_ERRORS, &fbc->ucsr);
- ffb_switch_from_graph(&all->par);
-
dac = all->par.dac;
- upa_writel(0x8000, &dac->type);
- all->par.dac_rev = upa_readl(&dac->value) >> 0x1c;
+ upa_writel(FFB_DAC_DID, &dac->type);
+ dac_pnum = upa_readl(&dac->value);
+ dac_rev = (dac_pnum & FFB_DAC_DID_REV) >> FFB_DAC_DID_REV_SHIFT;
+ dac_pnum = (dac_pnum & FFB_DAC_DID_PNUM) >> FFB_DAC_DID_PNUM_SHIFT;
+
+ upa_writel(FFB_DAC_UCTRL, &dac->type);
+ dac_mrev = upa_readl(&dac->value);
+ dac_mrev = (dac_mrev & FFB_DAC_UCTRL_MANREV) >>
+ FFB_DAC_UCTRL_MANREV_SHIFT;
/* Elite3D has different DAC revision numbering, and no DAC revisions
- * have the reversed meaning of cursor enable.
+ * have the reversed meaning of cursor enable. Otherwise, Pacifica 1
+ * ramdacs with manufacturing revision less than 3 have inverted
+ * cursor logic. We identify Pacifica 1 as not Pacifica 2, the
+ * latter having a part number value of 0x236e.
*/
- if (all->par.flags & FFB_FLAG_AFB)
- all->par.dac_rev = 10;
+ if ((all->par.flags & FFB_FLAG_AFB) || dac_pnum == 0x236e) {
+ all->par.flags &= ~FFB_FLAG_INVCURSOR;
+ } else {
+ if (dac_mrev < 3)
+ all->par.flags |= FFB_FLAG_INVCURSOR;
+ }
+
+ ffb_switch_from_graph(&all->par);
/* Unblank it just to be sure. When there are multiple
* FFB/AFB cards in the system, or it is not the OBP
dev_set_drvdata(&op->dev, all);
- printk("%s: %s at %016lx, type %d, DAC revision %d\n",
+ printk("%s: %s at %016lx, type %d, "
+ "DAC pnum[%x] rev[%d] manuf_rev[%d]\n",
dp->full_name,
((all->par.flags & FFB_FLAG_AFB) ? "AFB" : "FFB"),
- all->par.physbase, all->par.board_type, all->par.dac_rev);
+ all->par.physbase, all->par.board_type,
+ dac_pnum, dac_rev, dac_mrev);
return 0;
}
#define MAX_LEVEL 0x534
#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
-static struct backlight_properties riva_bl_data;
-
static int riva_bl_get_level_brightness(struct riva_par *par,
int level)
{
FB_BACKLIGHT_MAX);
bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
- bd->props.brightness = riva_bl_data.max_brightness;
+ bd->props.brightness = bd->props.max_brightness;
bd->props.power = FB_BLANK_UNBLANK;
backlight_update_status(bd);
static void __devexit s3_pci_remove(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
- struct s3fb_info *par = info->par;
if (info) {
#ifdef CONFIG_MTRR
+ struct s3fb_info *par = info->par;
+
if (par->mtrr_reg >= 0) {
mtrr_del(par->mtrr_reg, 0, 0);
par->mtrr_reg = -1;
extern struct file_system_type v9fs_fs_type;
extern const struct address_space_operations v9fs_addr_operations;
extern const struct file_operations v9fs_file_operations;
-extern const struct file_operations v9fs_cached_file_operations;
extern const struct file_operations v9fs_dir_operations;
extern struct dentry_operations v9fs_dentry_operations;
extern struct dentry_operations v9fs_cached_dentry_operations;
#include "v9fs_vfs.h"
#include "fid.h"
+static const struct file_operations v9fs_cached_file_operations;
+
/**
* v9fs_file_open - open a file (or directory)
* @inode: inode to be opened
return total;
}
-const struct file_operations v9fs_cached_file_operations = {
+static const struct file_operations v9fs_cached_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
file_inode = file->d_inode;
sb = file_inode->i_sb;
v9ses = v9fs_inode2v9ses(file_inode);
- v9fid = v9fs_fid_lookup(file);
+ v9fid = v9fs_fid_clone(file);
if(IS_ERR(v9fid))
return PTR_ERR(v9fid);
0);
if (IS_ERR((void *)info->mmap_base)) {
up_write(&ctx->mm->mmap_sem);
- printk("mmap err: %ld\n", -info->mmap_base);
info->mmap_size = 0;
aio_free_ring(ctx);
return -EAGAIN;
if (inf) {
struct autofs_sb_info *sbi = autofs4_sbi(de->d_sb);
- inf->dentry = NULL;
- inf->inode = NULL;
-
if (sbi) {
spin_lock(&sbi->rehash_lock);
if (!list_empty(&inf->rehash))
spin_unlock(&sbi->rehash_lock);
}
+ inf->dentry = NULL;
+ inf->inode = NULL;
+
autofs4_free_ino(inf);
}
}
DUMP_SEEK(PAGE_SIZE);
} else {
if (page == ZERO_PAGE(addr)) {
- DUMP_SEEK(PAGE_SIZE);
+ if (!dump_seek(file, PAGE_SIZE)) {
+ page_cache_release(page);
+ goto end_coredump;
+ }
} else {
void *kaddr;
flush_cache_page(vma, addr,
int executable_stack;
int retval, i;
+ kdebug("____ LOAD %d ____", current->pid);
+
memset(&exec_params, 0, sizeof(exec_params));
memset(&interp_params, 0, sizeof(interp_params));
if (mm) {
if (phdr->p_flags & PF_X) {
- mm->start_code = seg->addr;
- mm->end_code = seg->addr + phdr->p_memsz;
+ if (!mm->start_code) {
+ mm->start_code = seg->addr;
+ mm->end_code = seg->addr +
+ phdr->p_memsz;
+ }
} else if (!mm->start_data) {
mm->start_data = seg->addr;
#ifndef CONFIG_MMU
if (mm) {
if (phdr->p_flags & PF_X) {
- mm->start_code = maddr;
- mm->end_code = maddr + phdr->p_memsz;
+ if (!mm->start_code) {
+ mm->start_code = maddr;
+ mm->end_code = maddr + phdr->p_memsz;
+ }
} else if (!mm->start_data) {
mm->start_data = maddr;
mm->end_data = maddr + phdr->p_memsz;
DUMP_SEEK(file->f_pos + PAGE_SIZE);
}
else if (page == ZERO_PAGE(addr)) {
- DUMP_SEEK(file->f_pos + PAGE_SIZE);
page_cache_release(page);
+ DUMP_SEEK(file->f_pos + PAGE_SIZE);
}
else {
void *kaddr;
/* temporary */
if (major == 0) {
for (i = ARRAY_SIZE(chrdevs)-1; i > 0; i--) {
- if (is_lanana_major(i))
- continue;
if (chrdevs[i] == NULL)
break;
}
Fix hang (in i_size_read) when simultaneous size update of same remote file
on smp system corrupts sequence number. Do not reread unnecessarily partial page
(which we are about to overwrite anyway) when writing out file opened rw.
+When DOS attribute of file on non-Unix server's file changes on the server side
+from read-only back to read-write, reflect this change in default file mode
+(we had been leaving a file's mode read-only until the inode were reloaded).
+Allow setting of attribute back to ATTR_NORMAL (removing readonly dos attribute
+when archive dos attribute not set and we are changing mode back to writeable
+on server which does not support the Unix Extensions).
Version 1.47
------------
calls including posix open
and posix unlink */
#ifdef CONFIG_CIFS_POSIX
-#define CIFS_UNIX_CAP_MASK 0x0000003b
+/* Can not set pathnames cap yet until we send new posix create SMB since
+ otherwise server can treat such handles opened with older ntcreatex
+ (by a new client which knows how to send posix path ops)
+ as non-posix handles (can affect write behavior with byte range locks.
+ We can add back in POSIX_PATH_OPS cap when Posix Create/Mkdir finished */
+/* #define CIFS_UNIX_CAP_MASK 0x0000003b */
+#define CIFS_UNIX_CAP_MASK 0x0000001b
#else
#define CIFS_UNIX_CAP_MASK 0x00000013
#endif /* CONFIG_CIFS_POSIX */
mode e.g. 555 */
if (cifsInfo->cifsAttrs & ATTR_READONLY)
inode->i_mode &= ~(S_IWUGO);
+ else if ((inode->i_mode & S_IWUGO) == 0)
+ /* the ATTR_READONLY flag may have been */
+ /* changed on server -- set any w bits */
+ /* allowed by mnt_file_mode */
+ inode->i_mode |= (S_IWUGO &
+ cifs_sb->mnt_file_mode);
/* BB add code here -
validate if device or weird share or device type? */
}
struct cifsFileInfo *open_file = NULL;
FILE_BASIC_INFO time_buf;
int set_time = FALSE;
+ int set_dosattr = FALSE;
__u64 mode = 0xFFFFFFFFFFFFFFFFULL;
__u64 uid = 0xFFFFFFFFFFFFFFFFULL;
__u64 gid = 0xFFFFFFFFFFFFFFFFULL;
else if (attrs->ia_valid & ATTR_MODE) {
rc = 0;
if ((mode & S_IWUGO) == 0) /* not writeable */ {
- if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0)
+ if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
+ set_dosattr = TRUE;
time_buf.Attributes =
cpu_to_le32(cifsInode->cifsAttrs |
ATTR_READONLY);
+ }
} else if ((mode & S_IWUGO) == S_IWUGO) {
- if (cifsInode->cifsAttrs & ATTR_READONLY)
+ if (cifsInode->cifsAttrs & ATTR_READONLY) {
+ set_dosattr = TRUE;
time_buf.Attributes =
cpu_to_le32(cifsInode->cifsAttrs &
(~ATTR_READONLY));
+ /* Windows ignores set to zero */
+ if(time_buf.Attributes == 0)
+ time_buf.Attributes |=
+ cpu_to_le32(ATTR_NORMAL);
+ }
}
/* BB to be implemented -
via Windows security descriptors or streams */
} else
time_buf.ChangeTime = 0;
- if (set_time || time_buf.Attributes) {
+ if (set_time || set_dosattr) {
time_buf.CreationTime = 0; /* do not change */
/* In the future we should experiment - try setting timestamps
via Handle (SetFileInfo) instead of by path */
tmp_inode->i_mode |= S_IFREG;
if (attr & ATTR_READONLY)
tmp_inode->i_mode &= ~(S_IWUGO);
+ else if ((tmp_inode->i_mode & S_IWUGO) == 0)
+ /* the ATTR_READONLY flag may have been changed on */
+ /* server -- set any w bits allowed by mnt_file_mode */
+ tmp_inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode);
} /* could add code here - to validate if device or weird share type? */
/* can not fill in nlink here as in qpathinfo version and Unx search */
HANDLE_IOCTL(I2C_SMBUS, do_i2c_smbus_ioctl)
/* wireless */
HANDLE_IOCTL(SIOCGIWRANGE, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCGIWPRIV, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCGIWSTATS, do_wireless_ioctl)
HANDLE_IOCTL(SIOCSIWSPY, do_wireless_ioctl)
HANDLE_IOCTL(SIOCGIWSPY, do_wireless_ioctl)
HANDLE_IOCTL(SIOCSIWTHRSPY, do_wireless_ioctl)
HANDLE_IOCTL(SIOCGIWTHRSPY, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCSIWMLME, do_wireless_ioctl)
HANDLE_IOCTL(SIOCGIWAPLIST, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCSIWSCAN, do_wireless_ioctl)
HANDLE_IOCTL(SIOCGIWSCAN, do_wireless_ioctl)
HANDLE_IOCTL(SIOCSIWESSID, do_wireless_ioctl)
HANDLE_IOCTL(SIOCGIWESSID, do_wireless_ioctl)
HANDLE_IOCTL(SIOCGIWNICKN, do_wireless_ioctl)
HANDLE_IOCTL(SIOCSIWENCODE, do_wireless_ioctl)
HANDLE_IOCTL(SIOCGIWENCODE, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCSIWGENIE, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCGIWGENIE, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCSIWENCODEEXT, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCGIWENCODEEXT, do_wireless_ioctl)
+HANDLE_IOCTL(SIOCSIWPMKSA, do_wireless_ioctl)
HANDLE_IOCTL(SIOCSIFBR, old_bridge_ioctl)
HANDLE_IOCTL(SIOCGIFBR, old_bridge_ioctl)
HANDLE_IOCTL(RTC_IRQP_READ32, rtc_ioctl)
* name into corename, which must have space for at least
* CORENAME_MAX_SIZE bytes plus one byte for the zero terminator.
*/
-static void format_corename(char *corename, const char *pattern, long signr)
+static int format_corename(char *corename, const char *pattern, long signr)
{
const char *pat_ptr = pattern;
char *out_ptr = corename;
char *const out_end = corename + CORENAME_MAX_SIZE;
int rc;
int pid_in_pattern = 0;
+ int ispipe = 0;
+
+ if (*pattern == '|')
+ ispipe = 1;
/* Repeat as long as we have more pattern to process and more output
space */
*
* If core_pattern does not include a %p (as is the default)
* and core_uses_pid is set, then .%pid will be appended to
- * the filename */
- if (!pid_in_pattern
+ * the filename. Do not do this for piped commands. */
+ if (!ispipe && !pid_in_pattern
&& (core_uses_pid || atomic_read(¤t->mm->mm_users) != 1)) {
rc = snprintf(out_ptr, out_end - out_ptr,
".%d", current->tgid);
goto out;
out_ptr += rc;
}
- out:
+out:
*out_ptr = 0;
+ return ispipe;
}
static void zap_process(struct task_struct *start)
* uses lock_kernel()
*/
lock_kernel();
- format_corename(corename, core_pattern, signr);
+ ispipe = format_corename(corename, core_pattern, signr);
unlock_kernel();
- if (corename[0] == '|') {
+ if (ispipe) {
/* SIGPIPE can happen, but it's just never processed */
if(call_usermodehelper_pipe(corename+1, NULL, NULL, &file)) {
printk(KERN_INFO "Core dump to %s pipe failed\n",
corename);
goto fail_unlock;
}
- ispipe = 1;
} else
file = filp_open(corename,
O_CREAT | 2 | O_NOFOLLOW | O_LARGEFILE | flag,
return ext3_journal_get_write_access(handle, bh);
}
-/*
- * The idea of this helper function is following:
- * if prepare_write has allocated some blocks, but not all of them, the
- * transaction must include the content of the newly allocated blocks.
- * This content is expected to be set to zeroes by block_prepare_write().
- * 2006/10/14 SAW
- */
-static int ext3_prepare_failure(struct file *file, struct page *page,
- unsigned from, unsigned to)
-{
- struct address_space *mapping;
- struct buffer_head *bh, *head, *next;
- unsigned block_start, block_end;
- unsigned blocksize;
- int ret;
- handle_t *handle = ext3_journal_current_handle();
-
- mapping = page->mapping;
- if (ext3_should_writeback_data(mapping->host)) {
- /* optimization: no constraints about data */
-skip:
- return ext3_journal_stop(handle);
- }
-
- head = page_buffers(page);
- blocksize = head->b_size;
- for ( bh = head, block_start = 0;
- bh != head || !block_start;
- block_start = block_end, bh = next)
- {
- next = bh->b_this_page;
- block_end = block_start + blocksize;
- if (block_end <= from)
- continue;
- if (block_start >= to) {
- block_start = to;
- break;
- }
- if (!buffer_mapped(bh))
- /* prepare_write failed on this bh */
- break;
- if (ext3_should_journal_data(mapping->host)) {
- ret = do_journal_get_write_access(handle, bh);
- if (ret) {
- ext3_journal_stop(handle);
- return ret;
- }
- }
- /*
- * block_start here becomes the first block where the current iteration
- * of prepare_write failed.
- */
- }
- if (block_start <= from)
- goto skip;
-
- /* commit allocated and zeroed buffers */
- return mapping->a_ops->commit_write(file, page, from, block_start);
-}
-
static int ext3_prepare_write(struct file *file, struct page *page,
unsigned from, unsigned to)
{
struct inode *inode = page->mapping->host;
- int ret, ret2;
- int needed_blocks = ext3_writepage_trans_blocks(inode);
+ int ret, needed_blocks = ext3_writepage_trans_blocks(inode);
handle_t *handle;
int retries = 0;
retry:
handle = ext3_journal_start(inode, needed_blocks);
- if (IS_ERR(handle))
- return PTR_ERR(handle);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ goto out;
+ }
if (test_opt(inode->i_sb, NOBH) && ext3_should_writeback_data(inode))
ret = nobh_prepare_write(page, from, to, ext3_get_block);
else
ret = block_prepare_write(page, from, to, ext3_get_block);
if (ret)
- goto failure;
+ goto prepare_write_failed;
if (ext3_should_journal_data(inode)) {
ret = walk_page_buffers(handle, page_buffers(page),
from, to, NULL, do_journal_get_write_access);
- if (ret)
- /* fatal error, just put the handle and return */
- journal_stop(handle);
}
- return ret;
-
-failure:
- ret2 = ext3_prepare_failure(file, page, from, to);
- if (ret2 < 0)
- return ret2;
+prepare_write_failed:
+ if (ret)
+ ext3_journal_stop(handle);
if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
goto retry;
- /* retry number exceeded, or other error like -EDQUOT */
+out:
return ret;
}
BHDR(bh)->h_refcount = cpu_to_le32(
le32_to_cpu(BHDR(bh)->h_refcount) - 1);
error = ext3_journal_dirty_metadata(handle, bh);
- handle->h_sync = 1;
+ if (IS_SYNC(inode))
+ handle->h_sync = 1;
DQUOT_FREE_BLOCK(inode, 1);
ea_bdebug(bh, "refcount now=%d; releasing",
le32_to_cpu(BHDR(bh)->h_refcount));
return ext4_journal_get_write_access(handle, bh);
}
-/*
- * The idea of this helper function is following:
- * if prepare_write has allocated some blocks, but not all of them, the
- * transaction must include the content of the newly allocated blocks.
- * This content is expected to be set to zeroes by block_prepare_write().
- * 2006/10/14 SAW
- */
-static int ext4_prepare_failure(struct file *file, struct page *page,
- unsigned from, unsigned to)
-{
- struct address_space *mapping;
- struct buffer_head *bh, *head, *next;
- unsigned block_start, block_end;
- unsigned blocksize;
- int ret;
- handle_t *handle = ext4_journal_current_handle();
-
- mapping = page->mapping;
- if (ext4_should_writeback_data(mapping->host)) {
- /* optimization: no constraints about data */
-skip:
- return ext4_journal_stop(handle);
- }
-
- head = page_buffers(page);
- blocksize = head->b_size;
- for ( bh = head, block_start = 0;
- bh != head || !block_start;
- block_start = block_end, bh = next)
- {
- next = bh->b_this_page;
- block_end = block_start + blocksize;
- if (block_end <= from)
- continue;
- if (block_start >= to) {
- block_start = to;
- break;
- }
- if (!buffer_mapped(bh))
- /* prepare_write failed on this bh */
- break;
- if (ext4_should_journal_data(mapping->host)) {
- ret = do_journal_get_write_access(handle, bh);
- if (ret) {
- ext4_journal_stop(handle);
- return ret;
- }
- }
- /*
- * block_start here becomes the first block where the current iteration
- * of prepare_write failed.
- */
- }
- if (block_start <= from)
- goto skip;
-
- /* commit allocated and zeroed buffers */
- return mapping->a_ops->commit_write(file, page, from, block_start);
-}
-
static int ext4_prepare_write(struct file *file, struct page *page,
unsigned from, unsigned to)
{
struct inode *inode = page->mapping->host;
- int ret, ret2;
- int needed_blocks = ext4_writepage_trans_blocks(inode);
+ int ret, needed_blocks = ext4_writepage_trans_blocks(inode);
handle_t *handle;
int retries = 0;
retry:
handle = ext4_journal_start(inode, needed_blocks);
- if (IS_ERR(handle))
- return PTR_ERR(handle);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ goto out;
+ }
if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode))
ret = nobh_prepare_write(page, from, to, ext4_get_block);
else
ret = block_prepare_write(page, from, to, ext4_get_block);
if (ret)
- goto failure;
+ goto prepare_write_failed;
if (ext4_should_journal_data(inode)) {
ret = walk_page_buffers(handle, page_buffers(page),
from, to, NULL, do_journal_get_write_access);
- if (ret)
- /* fatal error, just put the handle and return */
- ext4_journal_stop(handle);
}
- return ret;
-
-failure:
- ret2 = ext4_prepare_failure(file, page, from, to);
- if (ret2 < 0)
- return ret2;
+prepare_write_failed:
+ if (ret)
+ ext4_journal_stop(handle);
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
- /* retry number exceeded, or other error like -EDQUOT */
+out:
return ret;
}
.d_revalidate = fuse_dentry_revalidate,
};
-static int valid_mode(int m)
+int fuse_valid_type(int m)
{
return S_ISREG(m) || S_ISDIR(m) || S_ISLNK(m) || S_ISCHR(m) ||
S_ISBLK(m) || S_ISFIFO(m) || S_ISSOCK(m);
fuse_put_request(fc, req);
/* Zero nodeid is same as -ENOENT, but with valid timeout */
if (!err && outarg.nodeid &&
- (invalid_nodeid(outarg.nodeid) || !valid_mode(outarg.attr.mode)))
+ (invalid_nodeid(outarg.nodeid) ||
+ !fuse_valid_type(outarg.attr.mode)))
err = -EIO;
if (!err && outarg.nodeid) {
inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
* Remove connection from control filesystem
*/
void fuse_ctl_remove_conn(struct fuse_conn *fc);
+
+/**
+ * Is file type valid?
+ */
+int fuse_valid_type(int m);
case OPT_ROOTMODE:
if (match_octal(&args[0], &value))
return 0;
+ if (!fuse_valid_type(value))
+ return 0;
d->rootmode = value;
d->rootmode_present = 1;
break;
#include "hostfs.h"
#include "kern_util.h"
#include "kern.h"
-#include "user_util.h"
#include "init.h"
struct hostfs_inode_info {
static int hostfs_fill_sb_common(struct super_block *sb, void *d, int silent)
{
struct inode *root_inode;
- char *name, *data = d;
+ char *host_root_path, *req_root = d;
int err;
sb->s_blocksize = 1024;
sb->s_op = &hostfs_sbops;
/* NULL is printed as <NULL> by sprintf: avoid that. */
- if (data == NULL)
- data = "";
+ if (req_root == NULL)
+ req_root = "";
err = -ENOMEM;
- name = kmalloc(strlen(root_ino) + 1
- + strlen(data) + 1, GFP_KERNEL);
- if(name == NULL)
+ host_root_path = kmalloc(strlen(root_ino) + 1
+ + strlen(req_root) + 1, GFP_KERNEL);
+ if(host_root_path == NULL)
goto out;
- sprintf(name, "%s/%s", root_ino, data);
+ sprintf(host_root_path, "%s/%s", root_ino, req_root);
root_inode = iget(sb, 0);
if(root_inode == NULL)
if(err)
goto out_put;
- HOSTFS_I(root_inode)->host_filename = name;
- /* Avoid that in the error path, iput(root_inode) frees again name through
- * hostfs_destroy_inode! */
- name = NULL;
+ HOSTFS_I(root_inode)->host_filename = host_root_path;
+ /* Avoid that in the error path, iput(root_inode) frees again
+ * host_root_path through hostfs_destroy_inode! */
+ host_root_path = NULL;
err = -ENOMEM;
sb->s_root = d_alloc_root(root_inode);
out_put:
iput(root_inode);
out_free:
- kfree(name);
+ kfree(host_root_path);
out:
return(err);
}
* ... prune child dentries and writebacks if needed.
*/
if (atomic_read(&old_dentry->d_count) > 1) {
- nfs_wb_all(old_inode);
+ if (S_ISREG(old_inode->i_mode))
+ nfs_wb_all(old_inode);
shrink_dcache_parent(old_dentry);
}
nfs_inode_return_delegation(old_inode);
if (NFS_PROTO(data->inode)->commit_done(task, data) != 0)
return;
if (unlikely(task->tk_status < 0)) {
- dreq->error = task->tk_status;
+ dprintk("NFS: %5u commit failed with error %d.\n",
+ task->tk_pid, task->tk_status);
dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
- }
- if (memcmp(&dreq->verf, &data->verf, sizeof(data->verf))) {
+ } else if (memcmp(&dreq->verf, &data->verf, sizeof(data->verf))) {
dprintk("NFS: %5u commit verify failed\n", task->tk_pid);
dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
}
spin_lock(&dreq->lock);
+ if (unlikely(dreq->error != 0))
+ goto out_unlock;
if (unlikely(status < 0)) {
+ /* An error has occured, so we should not commit */
+ dreq->flags = 0;
dreq->error = status;
- goto out_unlock;
}
dreq->count += data->res.count;
lock_kernel();
nfs_begin_data_update(inode);
/* Write all dirty data */
- filemap_write_and_wait(inode->i_mapping);
- nfs_wb_all(inode);
+ if (S_ISREG(inode->i_mode)) {
+ filemap_write_and_wait(inode->i_mapping);
+ nfs_wb_all(inode);
+ }
/*
* Return any delegations if we're going to change ACLs
*/
static struct nfs_page * nfs_update_request(struct nfs_open_context*,
struct page *,
unsigned int, unsigned int);
-static void nfs_mark_request_dirty(struct nfs_page *req);
static long nfs_flush_mapping(struct address_space *mapping, struct writeback_control *wbc, int how);
static const struct rpc_call_ops nfs_write_partial_ops;
static const struct rpc_call_ops nfs_write_full_ops;
#define NFS_CONGESTION_OFF_THRESH \
(NFS_CONGESTION_ON_THRESH - (NFS_CONGESTION_ON_THRESH >> 2))
-static void nfs_set_page_writeback(struct page *page)
+static int nfs_set_page_writeback(struct page *page)
{
- if (!test_set_page_writeback(page)) {
+ int ret = test_set_page_writeback(page);
+
+ if (!ret) {
struct inode *inode = page->mapping->host;
struct nfs_server *nfss = NFS_SERVER(inode);
NFS_CONGESTION_ON_THRESH)
set_bdi_congested(&nfss->backing_dev_info, WRITE);
}
+ return ret;
}
static void nfs_end_page_writeback(struct page *page)
static int nfs_page_mark_flush(struct page *page)
{
struct nfs_page *req;
- spinlock_t *req_lock = &NFS_I(page->mapping->host)->req_lock;
+ struct nfs_inode *nfsi = NFS_I(page->mapping->host);
+ spinlock_t *req_lock = &nfsi->req_lock;
int ret;
spin_lock(req_lock);
return ret;
spin_lock(req_lock);
}
- spin_unlock(req_lock);
- if (test_and_set_bit(PG_FLUSHING, &req->wb_flags) == 0) {
- nfs_mark_request_dirty(req);
- nfs_set_page_writeback(page);
+ if (test_bit(PG_NEED_COMMIT, &req->wb_flags)) {
+ /* This request is marked for commit */
+ spin_unlock(req_lock);
+ nfs_unlock_request(req);
+ return 1;
}
+ if (nfs_set_page_writeback(page) == 0) {
+ nfs_list_remove_request(req);
+ /* add the request to the inode's dirty list. */
+ radix_tree_tag_set(&nfsi->nfs_page_tree,
+ req->wb_index, NFS_PAGE_TAG_DIRTY);
+ nfs_list_add_request(req, &nfsi->dirty);
+ nfsi->ndirty++;
+ spin_unlock(req_lock);
+ __mark_inode_dirty(page->mapping->host, I_DIRTY_PAGES);
+ } else
+ spin_unlock(req_lock);
ret = test_bit(PG_NEED_FLUSH, &req->wb_flags);
nfs_unlock_request(req);
return ret;
}
SetPagePrivate(req->wb_page);
set_page_private(req->wb_page, (unsigned long)req);
+ if (PageDirty(req->wb_page))
+ set_bit(PG_NEED_FLUSH, &req->wb_flags);
nfsi->npages++;
atomic_inc(&req->wb_count);
return 0;
set_page_private(req->wb_page, 0);
ClearPagePrivate(req->wb_page);
radix_tree_delete(&nfsi->nfs_page_tree, req->wb_index);
+ if (test_and_clear_bit(PG_NEED_FLUSH, &req->wb_flags))
+ __set_page_dirty_nobuffers(req->wb_page);
nfsi->npages--;
if (!nfsi->npages) {
spin_unlock(&nfsi->req_lock);
nfs_release_request(req);
}
-/*
- * Add a request to the inode's dirty list.
- */
-static void
-nfs_mark_request_dirty(struct nfs_page *req)
-{
- struct inode *inode = req->wb_context->dentry->d_inode;
- struct nfs_inode *nfsi = NFS_I(inode);
-
- spin_lock(&nfsi->req_lock);
- radix_tree_tag_set(&nfsi->nfs_page_tree,
- req->wb_index, NFS_PAGE_TAG_DIRTY);
- nfs_list_add_request(req, &nfsi->dirty);
- nfsi->ndirty++;
- spin_unlock(&nfsi->req_lock);
- __mark_inode_dirty(inode, I_DIRTY_PAGES);
-}
-
static void
nfs_redirty_request(struct nfs_page *req)
{
- clear_bit(PG_FLUSHING, &req->wb_flags);
__set_page_dirty_nobuffers(req->wb_page);
}
static inline int
nfs_dirty_request(struct nfs_page *req)
{
- return test_bit(PG_FLUSHING, &req->wb_flags) == 0;
+ struct page *page = req->wb_page;
+
+ if (page == NULL || test_bit(PG_NEED_COMMIT, &req->wb_flags))
+ return 0;
+ return !PageWriteback(req->wb_page);
}
#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
spin_lock(&nfsi->req_lock);
nfs_list_add_request(req, &nfsi->commit);
nfsi->ncommit++;
+ set_bit(PG_NEED_COMMIT, &(req)->wb_flags);
spin_unlock(&nfsi->req_lock);
inc_zone_page_state(req->wb_page, NR_UNSTABLE_NFS);
__mark_inode_dirty(inode, I_DIRTY_DATASYNC);
}
+
+static inline
+int nfs_write_need_commit(struct nfs_write_data *data)
+{
+ return data->verf.committed != NFS_FILE_SYNC;
+}
+
+static inline
+int nfs_reschedule_unstable_write(struct nfs_page *req)
+{
+ if (test_bit(PG_NEED_COMMIT, &req->wb_flags)) {
+ nfs_mark_request_commit(req);
+ return 1;
+ }
+ if (test_and_clear_bit(PG_NEED_RESCHED, &req->wb_flags)) {
+ nfs_redirty_request(req);
+ return 1;
+ }
+ return 0;
+}
+#else
+static inline void
+nfs_mark_request_commit(struct nfs_page *req)
+{
+}
+
+static inline
+int nfs_write_need_commit(struct nfs_write_data *data)
+{
+ return 0;
+}
+
+static inline
+int nfs_reschedule_unstable_write(struct nfs_page *req)
+{
+ return 0;
+}
#endif
/*
while(!list_empty(head)) {
req = nfs_list_entry(head->next);
nfs_list_remove_request(req);
+ nfs_end_page_writeback(req->wb_page);
nfs_inode_remove_request(req);
nfs_clear_page_writeback(req);
}
req = nfs_list_entry(head->next);
dec_zone_page_state(req->wb_page, NR_UNSTABLE_NFS);
nfs_list_remove_request(req);
+ clear_bit(PG_NEED_COMMIT, &(req)->wb_flags);
nfs_inode_remove_request(req);
nfs_unlock_request(req);
}
static void nfs_writepage_release(struct nfs_page *req)
{
- nfs_end_page_writeback(req->wb_page);
-
-#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
- if (!PageError(req->wb_page)) {
- if (NFS_NEED_RESCHED(req)) {
- nfs_redirty_request(req);
- goto out;
- } else if (NFS_NEED_COMMIT(req)) {
- nfs_mark_request_commit(req);
- goto out;
- }
- }
- nfs_inode_remove_request(req);
-out:
- nfs_clear_commit(req);
- nfs_clear_reschedule(req);
-#else
- nfs_inode_remove_request(req);
-#endif
+ if (PageError(req->wb_page) || !nfs_reschedule_unstable_write(req)) {
+ nfs_end_page_writeback(req->wb_page);
+ nfs_inode_remove_request(req);
+ } else
+ nfs_end_page_writeback(req->wb_page);
nfs_clear_page_writeback(req);
}
nfs_writedata_release(data);
}
nfs_redirty_request(req);
+ nfs_end_page_writeback(req->wb_page);
nfs_clear_page_writeback(req);
return -ENOMEM;
}
struct nfs_page *req = nfs_list_entry(head->next);
nfs_list_remove_request(req);
nfs_redirty_request(req);
+ nfs_end_page_writeback(req->wb_page);
nfs_clear_page_writeback(req);
}
return -ENOMEM;
req = nfs_list_entry(head->next);
nfs_list_remove_request(req);
nfs_redirty_request(req);
+ nfs_end_page_writeback(req->wb_page);
nfs_clear_page_writeback(req);
}
return error;
nfs_set_pageerror(page);
req->wb_context->error = task->tk_status;
dprintk(", error = %d\n", task->tk_status);
- } else {
-#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
- if (data->verf.committed < NFS_FILE_SYNC) {
- if (!NFS_NEED_COMMIT(req)) {
- nfs_defer_commit(req);
- memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
- dprintk(" defer commit\n");
- } else if (memcmp(&req->wb_verf, &data->verf, sizeof(req->wb_verf))) {
- nfs_defer_reschedule(req);
- dprintk(" server reboot detected\n");
- }
- } else
-#endif
- dprintk(" OK\n");
+ goto out;
}
+ if (nfs_write_need_commit(data)) {
+ spinlock_t *req_lock = &NFS_I(page->mapping->host)->req_lock;
+
+ spin_lock(req_lock);
+ if (test_bit(PG_NEED_RESCHED, &req->wb_flags)) {
+ /* Do nothing we need to resend the writes */
+ } else if (!test_and_set_bit(PG_NEED_COMMIT, &req->wb_flags)) {
+ memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
+ dprintk(" defer commit\n");
+ } else if (memcmp(&req->wb_verf, &data->verf, sizeof(req->wb_verf))) {
+ set_bit(PG_NEED_RESCHED, &req->wb_flags);
+ clear_bit(PG_NEED_COMMIT, &req->wb_flags);
+ dprintk(" server reboot detected\n");
+ }
+ spin_unlock(req_lock);
+ } else
+ dprintk(" OK\n");
+
+out:
if (atomic_dec_and_test(&req->wb_complete))
nfs_writepage_release(req);
}
if (task->tk_status < 0) {
nfs_set_pageerror(page);
req->wb_context->error = task->tk_status;
- nfs_end_page_writeback(page);
- nfs_inode_remove_request(req);
dprintk(", error = %d\n", task->tk_status);
- goto next;
+ goto remove_request;
}
- nfs_end_page_writeback(page);
-#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
- if (data->args.stable != NFS_UNSTABLE || data->verf.committed == NFS_FILE_SYNC) {
- nfs_inode_remove_request(req);
- dprintk(" OK\n");
+ if (nfs_write_need_commit(data)) {
+ memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
+ nfs_mark_request_commit(req);
+ nfs_end_page_writeback(page);
+ dprintk(" marked for commit\n");
goto next;
}
- memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
- nfs_mark_request_commit(req);
- dprintk(" marked for commit\n");
-#else
+ dprintk(" OK\n");
+remove_request:
+ nfs_end_page_writeback(page);
nfs_inode_remove_request(req);
-#endif
next:
nfs_clear_page_writeback(req);
}
while (!list_empty(&data->pages)) {
req = nfs_list_entry(data->pages.next);
nfs_list_remove_request(req);
+ clear_bit(PG_NEED_COMMIT, &(req)->wb_flags);
dec_zone_page_state(req->wb_page, NR_UNSTABLE_NFS);
dprintk("NFS: commit (%s/%Ld %d@%Ld)",
int nfs_set_page_dirty(struct page *page)
{
+ spinlock_t *req_lock = &NFS_I(page->mapping->host)->req_lock;
struct nfs_page *req;
+ int ret;
- req = nfs_page_find_request(page);
+ spin_lock(req_lock);
+ req = nfs_page_find_request_locked(page);
if (req != NULL) {
/* Mark any existing write requests for flushing */
- set_bit(PG_NEED_FLUSH, &req->wb_flags);
+ ret = !test_and_set_bit(PG_NEED_FLUSH, &req->wb_flags);
+ spin_unlock(req_lock);
nfs_release_request(req);
+ return ret;
}
- return __set_page_dirty_nobuffers(page);
+ ret = __set_page_dirty_nobuffers(page);
+ spin_unlock(req_lock);
+ return ret;
}
#define NFS3_ENTRY_BAGGAGE (2 + 1 + 2 + 1)
#define NFS3_ENTRYPLUS_BAGGAGE (1 + 21 + 1 + (NFS3_FHSIZE >> 2))
static int
-encode_entry(struct readdir_cd *ccd, const char *name,
- int namlen, off_t offset, ino_t ino, unsigned int d_type, int plus)
+encode_entry(struct readdir_cd *ccd, const char *name, int namlen,
+ loff_t offset, ino_t ino, unsigned int d_type, int plus)
{
struct nfsd3_readdirres *cd = container_of(ccd, struct nfsd3_readdirres,
common);
*cd->offset1 = htonl(offset64 & 0xffffffff);
cd->offset1 = NULL;
} else {
- xdr_encode_hyper(cd->offset, (u64) offset);
+ xdr_encode_hyper(cd->offset, offset64);
}
}
struct posix_acl_summary pas;
unsigned short deny;
int eflag = ((flags & NFS4_ACL_TYPE_DEFAULT) ?
- NFS4_INHERITANCE_FLAGS : 0);
+ NFS4_INHERITANCE_FLAGS | NFS4_ACE_INHERIT_ONLY_ACE : 0);
BUG_ON(pacl->a_count < 3);
summarize_posix_acl(pacl, &pas);
status = nfserr_clid_inuse;
if (!cmp_creds(&conf->cl_cred, &rqstp->rq_cred)
|| conf->cl_addr != sin->sin_addr.s_addr) {
- printk("NFSD: setclientid: string in use by client"
- "(clientid %08x/%08x)\n",
- conf->cl_clientid.cl_boot, conf->cl_clientid.cl_id);
+ dprintk("NFSD: setclientid: string in use by client"
+ "at %u.%u.%u.%u\n", NIPQUAD(conf->cl_addr));
goto out;
}
}
unhash_delegation(dp);
}
- cancel_delayed_work(&laundromat_work);
nfsd4_shutdown_recdir();
nfs4_init = 0;
}
void __dlm_unhash_lockres(struct dlm_lock_resource *lockres)
{
- hlist_del_init(&lockres->hash_node);
- dlm_lockres_put(lockres);
+ if (!hlist_unhashed(&lockres->hash_node)) {
+ hlist_del_init(&lockres->hash_node);
+ dlm_lockres_put(lockres);
+ }
}
void __dlm_insert_lockres(struct dlm_ctxt *dlm,
dlm_kick_thread(dlm, NULL);
while (dlm_migrate_all_locks(dlm)) {
+ /* Give dlm_thread time to purge the lockres' */
+ msleep(500);
mlog(0, "%s: more migration to do\n", dlm->name);
}
dlm_mark_domain_leaving(dlm);
dlm_lockres_put(res);
}
+/* Checks whether the lockres can be migrated. Returns 0 if yes, < 0
+ * if not. If 0, numlocks is set to the number of locks in the lockres.
+ */
+static int dlm_is_lockres_migrateable(struct dlm_ctxt *dlm,
+ struct dlm_lock_resource *res,
+ int *numlocks)
+{
+ int ret;
+ int i;
+ int count = 0;
+ struct list_head *queue, *iter;
+ struct dlm_lock *lock;
+
+ assert_spin_locked(&res->spinlock);
+
+ ret = -EINVAL;
+ if (res->owner == DLM_LOCK_RES_OWNER_UNKNOWN) {
+ mlog(0, "cannot migrate lockres with unknown owner!\n");
+ goto leave;
+ }
+
+ if (res->owner != dlm->node_num) {
+ mlog(0, "cannot migrate lockres this node doesn't own!\n");
+ goto leave;
+ }
+
+ ret = 0;
+ queue = &res->granted;
+ for (i = 0; i < 3; i++) {
+ list_for_each(iter, queue) {
+ lock = list_entry(iter, struct dlm_lock, list);
+ ++count;
+ if (lock->ml.node == dlm->node_num) {
+ mlog(0, "found a lock owned by this node still "
+ "on the %s queue! will not migrate this "
+ "lockres\n", (i == 0 ? "granted" :
+ (i == 1 ? "converting" :
+ "blocked")));
+ ret = -ENOTEMPTY;
+ goto leave;
+ }
+ }
+ queue++;
+ }
+
+ *numlocks = count;
+ mlog(0, "migrateable lockres having %d locks\n", *numlocks);
+
+leave:
+ return ret;
+}
/*
* DLM_MIGRATE_LOCKRES
struct dlm_master_list_entry *mle = NULL;
struct dlm_master_list_entry *oldmle = NULL;
struct dlm_migratable_lockres *mres = NULL;
- int ret = -EINVAL;
+ int ret = 0;
const char *name;
unsigned int namelen;
int mle_added = 0;
- struct list_head *queue, *iter;
- int i;
- struct dlm_lock *lock;
- int empty = 1, wake = 0;
+ int numlocks;
+ int wake = 0;
if (!dlm_grab(dlm))
return -EINVAL;
* ensure this lockres is a proper candidate for migration
*/
spin_lock(&res->spinlock);
- if (res->owner == DLM_LOCK_RES_OWNER_UNKNOWN) {
- mlog(0, "cannot migrate lockres with unknown owner!\n");
- spin_unlock(&res->spinlock);
- goto leave;
- }
- if (res->owner != dlm->node_num) {
- mlog(0, "cannot migrate lockres this node doesn't own!\n");
+ ret = dlm_is_lockres_migrateable(dlm, res, &numlocks);
+ if (ret < 0) {
spin_unlock(&res->spinlock);
goto leave;
}
- mlog(0, "checking queues...\n");
- queue = &res->granted;
- for (i=0; i<3; i++) {
- list_for_each(iter, queue) {
- lock = list_entry (iter, struct dlm_lock, list);
- empty = 0;
- if (lock->ml.node == dlm->node_num) {
- mlog(0, "found a lock owned by this node "
- "still on the %s queue! will not "
- "migrate this lockres\n",
- i==0 ? "granted" :
- (i==1 ? "converting" : "blocked"));
- spin_unlock(&res->spinlock);
- ret = -ENOTEMPTY;
- goto leave;
- }
- }
- queue++;
- }
- mlog(0, "all locks on this lockres are nonlocal. continuing\n");
spin_unlock(&res->spinlock);
/* no work to do */
- if (empty) {
+ if (numlocks == 0) {
mlog(0, "no locks were found on this lockres! done!\n");
- ret = 0;
goto leave;
}
{
int ret;
int lock_dropped = 0;
+ int numlocks;
spin_lock(&res->spinlock);
if (res->owner != dlm->node_num) {
spin_unlock(&res->spinlock);
goto leave;
}
+
+ /* No need to migrate a lockres having no locks */
+ ret = dlm_is_lockres_migrateable(dlm, res, &numlocks);
+ if (ret >= 0 && numlocks == 0) {
+ spin_unlock(&res->spinlock);
+ goto leave;
+ }
spin_unlock(&res->spinlock);
/* Wheee! Migrate lockres here! Will sleep so drop spinlock. */
break;
}
- mlog(0, "removing lockres %.*s:%p from purgelist\n",
- lockres->lockname.len, lockres->lockname.name, lockres);
- list_del_init(&lockres->purge);
- dlm_lockres_put(lockres);
- dlm->purge_count--;
+ dlm_lockres_get(lockres);
/* This may drop and reacquire the dlm spinlock if it
* has to do migration. */
- mlog(0, "calling dlm_purge_lockres!\n");
- dlm_lockres_get(lockres);
if (dlm_purge_lockres(dlm, lockres))
BUG();
+
dlm_lockres_put(lockres);
- mlog(0, "DONE calling dlm_purge_lockres!\n");
/* Avoid adding any scheduling latencies */
cond_resched_lock(&dlm->spinlock);
proc-$(CONFIG_MMU) := mmu.o task_mmu.o
proc-y += inode.o root.o base.o generic.o array.o \
- proc_tty.o proc_misc.o proc_sysctl.o
+ proc_tty.o proc_misc.o
+proc-$(CONFIG_PROC_SYSCTL) += proc_sysctl.o
proc-$(CONFIG_PROC_KCORE) += kcore.o
proc-$(CONFIG_PROC_VMCORE) += vmcore.o
proc-$(CONFIG_PROC_DEVICETREE) += proc_devtree.o
#include <linux/proc_fs.h>
+#ifdef CONFIG_PROC_SYSCTL
extern int proc_sys_init(void);
+#else
+static inline void proc_sys_init(void) { }
+#endif
struct vmalloc_info {
unsigned long used;
proc_device_tree_init();
#endif
proc_bus = proc_mkdir("bus", NULL);
-#ifdef CONFIG_SYSCTL
proc_sys_init();
-#endif
}
static int proc_root_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat
{
key->on_disk_key.k_objectid--;
set_cpu_key_k_type(key, TYPE_ANY);
- set_cpu_key_k_offset(key, (loff_t) (-1));
+ set_cpu_key_k_offset(key, (loff_t)(~0ULL >> 1));
}
static int sd_is_left_mergeable(struct reiserfs_key *key, unsigned long bsize)
static struct reiserfs_xattr_handler *find_xattr_handler_prefix(const char
*prefix);
-static struct dentry *create_xa_root(struct super_block *sb)
+/* Returns the dentry referring to the root of the extended attribute
+ * directory tree. If it has already been retrieved, it is used. If it
+ * hasn't been created and the flags indicate creation is allowed, we
+ * attempt to create it. On error, we return a pointer-encoded error.
+ */
+static struct dentry *get_xa_root(struct super_block *sb, int flags)
{
struct dentry *privroot = dget(REISERFS_SB(sb)->priv_root);
struct dentry *xaroot;
/* This needs to be created at mount-time */
if (!privroot)
- return ERR_PTR(-EOPNOTSUPP);
+ return ERR_PTR(-ENODATA);
- xaroot = lookup_one_len(XAROOT_NAME, privroot, strlen(XAROOT_NAME));
- if (IS_ERR(xaroot)) {
+ mutex_lock(&privroot->d_inode->i_mutex);
+ if (REISERFS_SB(sb)->xattr_root) {
+ xaroot = dget(REISERFS_SB(sb)->xattr_root);
goto out;
- } else if (!xaroot->d_inode) {
- int err;
- mutex_lock(&privroot->d_inode->i_mutex);
- err =
- privroot->d_inode->i_op->mkdir(privroot->d_inode, xaroot,
- 0700);
- mutex_unlock(&privroot->d_inode->i_mutex);
-
- if (err) {
- dput(xaroot);
- dput(privroot);
- return ERR_PTR(err);
- }
- REISERFS_SB(sb)->xattr_root = dget(xaroot);
}
- out:
- dput(privroot);
- return xaroot;
-}
-
-/* This will return a dentry, or error, refering to the xa root directory.
- * If the xa root doesn't exist yet, the dentry will be returned without
- * an associated inode. This dentry can be used with ->mkdir to create
- * the xa directory. */
-static struct dentry *__get_xa_root(struct super_block *s)
-{
- struct dentry *privroot = dget(REISERFS_SB(s)->priv_root);
- struct dentry *xaroot = NULL;
-
- if (IS_ERR(privroot) || !privroot)
- return privroot;
-
xaroot = lookup_one_len(XAROOT_NAME, privroot, strlen(XAROOT_NAME));
if (IS_ERR(xaroot)) {
goto out;
} else if (!xaroot->d_inode) {
- dput(xaroot);
- xaroot = NULL;
- goto out;
+ int err = -ENODATA;
+ if (flags == 0 || flags & XATTR_CREATE)
+ err = privroot->d_inode->i_op->mkdir(privroot->d_inode,
+ xaroot, 0700);
+ if (err) {
+ dput(xaroot);
+ xaroot = ERR_PTR(err);
+ goto out;
+ }
}
-
- REISERFS_SB(s)->xattr_root = dget(xaroot);
+ REISERFS_SB(sb)->xattr_root = dget(xaroot);
out:
+ mutex_unlock(&privroot->d_inode->i_mutex);
dput(privroot);
return xaroot;
}
-/* Returns the dentry (or NULL) referring to the root of the extended
- * attribute directory tree. If it has already been retrieved, it is used.
- * Otherwise, we attempt to retrieve it from disk. It may also return
- * a pointer-encoded error.
- */
-static inline struct dentry *get_xa_root(struct super_block *s)
-{
- struct dentry *dentry = dget(REISERFS_SB(s)->xattr_root);
-
- if (!dentry)
- dentry = __get_xa_root(s);
-
- return dentry;
-}
-
/* Opens the directory corresponding to the inode's extended attribute store.
* If flags allow, the tree to the directory may be created. If creation is
* prohibited, -ENODATA is returned. */
struct dentry *xaroot, *xadir;
char namebuf[17];
- xaroot = get_xa_root(inode->i_sb);
- if (IS_ERR(xaroot)) {
+ xaroot = get_xa_root(inode->i_sb, flags);
+ if (IS_ERR(xaroot))
return xaroot;
- } else if (!xaroot) {
- if (flags == 0 || flags & XATTR_CREATE) {
- xaroot = create_xa_root(inode->i_sb);
- if (IS_ERR(xaroot))
- return xaroot;
- }
- if (!xaroot)
- return ERR_PTR(-ENODATA);
- }
/* ok, we have xaroot open */
-
snprintf(namebuf, sizeof(namebuf), "%X.%X",
le32_to_cpu(INODE_PKEY(inode)->k_objectid),
inode->i_generation);
/* Leftovers besides . and .. -- that's not good. */
if (dir->d_inode->i_nlink <= 2) {
- root = get_xa_root(inode->i_sb);
+ root = get_xa_root(inode->i_sb, XATTR_REPLACE);
reiserfs_write_lock_xattrs(inode->i_sb);
err = vfs_rmdir(root->d_inode, dir);
reiserfs_write_unlock_xattrs(inode->i_sb);
if (this_len + offset > PAGE_CACHE_SIZE)
this_len = PAGE_CACHE_SIZE - offset;
- /*
- * Reuse buf page, if SPLICE_F_MOVE is set and we are doing a full
- * page.
- */
- if ((sd->flags & SPLICE_F_MOVE) && this_len == PAGE_CACHE_SIZE) {
- /*
- * If steal succeeds, buf->page is now pruned from the
- * pagecache and we can reuse it. The page will also be
- * locked on successful return.
- */
- if (buf->ops->steal(pipe, buf))
- goto find_page;
-
- page = buf->page;
- if (add_to_page_cache(page, mapping, index, GFP_KERNEL)) {
- unlock_page(page);
- goto find_page;
- }
-
- page_cache_get(page);
-
- if (!(buf->flags & PIPE_BUF_FLAG_LRU))
- lru_cache_add(page);
- } else {
find_page:
- page = find_lock_page(mapping, index);
- if (!page) {
- ret = -ENOMEM;
- page = page_cache_alloc_cold(mapping);
- if (unlikely(!page))
- goto out_ret;
-
- /*
- * This will also lock the page
- */
- ret = add_to_page_cache_lru(page, mapping, index,
- GFP_KERNEL);
- if (unlikely(ret))
- goto out;
- }
+ page = find_lock_page(mapping, index);
+ if (!page) {
+ ret = -ENOMEM;
+ page = page_cache_alloc_cold(mapping);
+ if (unlikely(!page))
+ goto out_ret;
/*
- * We get here with the page locked. If the page is also
- * uptodate, we don't need to do more. If it isn't, we
- * may need to bring it in if we are not going to overwrite
- * the full page.
+ * This will also lock the page
*/
- if (!PageUptodate(page)) {
- if (this_len < PAGE_CACHE_SIZE) {
- ret = mapping->a_ops->readpage(file, page);
- if (unlikely(ret))
- goto out;
-
- lock_page(page);
-
- if (!PageUptodate(page)) {
- /*
- * Page got invalidated, repeat.
- */
- if (!page->mapping) {
- unlock_page(page);
- page_cache_release(page);
- goto find_page;
- }
- ret = -EIO;
- goto out;
- }
- } else
- SetPageUptodate(page);
- }
+ ret = add_to_page_cache_lru(page, mapping, index,
+ GFP_KERNEL);
+ if (unlikely(ret))
+ goto out;
}
ret = mapping->a_ops->prepare_write(file, page, offset, offset+this_len);
}
ret = mapping->a_ops->commit_write(file, page, offset, offset+this_len);
- if (!ret) {
+ if (ret) {
+ if (ret == AOP_TRUNCATED_PAGE) {
+ page_cache_release(page);
+ goto find_page;
+ }
+ if (ret < 0)
+ goto out;
/*
- * Return the number of bytes written and mark page as
- * accessed, we are now done!
+ * Partial write has happened, so 'ret' already initialized by
+ * number of bytes written, Where is nothing we have to do here.
*/
+ } else
ret = this_len;
- mark_page_accessed(page);
- balance_dirty_pages_ratelimited(mapping);
- } else if (ret == AOP_TRUNCATED_PAGE) {
- page_cache_release(page);
- goto find_page;
- }
+ /*
+ * Return the number of bytes written and mark page as
+ * accessed, we are now done!
+ */
+ mark_page_accessed(page);
+ balance_dirty_pages_ratelimited(mapping);
out:
page_cache_release(page);
unlock_page(page);
* key here is the 'actor' worker passed in that actually moves the data
* to the wanted destination. See pipe_to_file/pipe_to_sendpage above.
*/
-static ssize_t __splice_from_pipe(struct pipe_inode_info *pipe,
- struct file *out, loff_t *ppos, size_t len,
- unsigned int flags, splice_actor *actor)
+ssize_t __splice_from_pipe(struct pipe_inode_info *pipe,
+ struct file *out, loff_t *ppos, size_t len,
+ unsigned int flags, splice_actor *actor)
{
int ret, do_wakeup, err;
struct splice_desc sd;
return ret;
}
+EXPORT_SYMBOL(__splice_from_pipe);
ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
loff_t *ppos, size_t len, unsigned int flags,
ufs_get_inode_dev(inode->i_sb, UFS_I(inode)));
}
-static void ufs1_read_inode(struct inode *inode, struct ufs_inode *ufs_inode)
+static int ufs1_read_inode(struct inode *inode, struct ufs_inode *ufs_inode)
{
struct ufs_inode_info *ufsi = UFS_I(inode);
struct super_block *sb = inode->i_sb;
*/
inode->i_mode = mode = fs16_to_cpu(sb, ufs_inode->ui_mode);
inode->i_nlink = fs16_to_cpu(sb, ufs_inode->ui_nlink);
- if (inode->i_nlink == 0)
+ if (inode->i_nlink == 0) {
ufs_error (sb, "ufs_read_inode", "inode %lu has zero nlink\n", inode->i_ino);
+ return -1;
+ }
/*
* Linux now has 32-bit uid and gid, so we can support EFT.
for (i = 0; i < (UFS_NDADDR + UFS_NINDIR) * 4; i++)
ufsi->i_u1.i_symlink[i] = ufs_inode->ui_u2.ui_symlink[i];
}
+ return 0;
}
-static void ufs2_read_inode(struct inode *inode, struct ufs2_inode *ufs2_inode)
+static int ufs2_read_inode(struct inode *inode, struct ufs2_inode *ufs2_inode)
{
struct ufs_inode_info *ufsi = UFS_I(inode);
struct super_block *sb = inode->i_sb;
*/
inode->i_mode = mode = fs16_to_cpu(sb, ufs2_inode->ui_mode);
inode->i_nlink = fs16_to_cpu(sb, ufs2_inode->ui_nlink);
- if (inode->i_nlink == 0)
+ if (inode->i_nlink == 0) {
ufs_error (sb, "ufs_read_inode", "inode %lu has zero nlink\n", inode->i_ino);
+ return -1;
+ }
/*
* Linux now has 32-bit uid and gid, so we can support EFT.
for (i = 0; i < (UFS_NDADDR + UFS_NINDIR) * 4; i++)
ufsi->i_u1.i_symlink[i] = ufs2_inode->ui_u2.ui_symlink[i];
}
+ return 0;
}
void ufs_read_inode(struct inode * inode)
struct super_block * sb;
struct ufs_sb_private_info * uspi;
struct buffer_head * bh;
+ int err;
UFSD("ENTER, ino %lu\n", inode->i_ino);
if ((UFS_SB(sb)->s_flags & UFS_TYPE_MASK) == UFS_TYPE_UFS2) {
struct ufs2_inode *ufs2_inode = (struct ufs2_inode *)bh->b_data;
- ufs2_read_inode(inode,
- ufs2_inode + ufs_inotofsbo(inode->i_ino));
+ err = ufs2_read_inode(inode,
+ ufs2_inode + ufs_inotofsbo(inode->i_ino));
} else {
struct ufs_inode *ufs_inode = (struct ufs_inode *)bh->b_data;
- ufs1_read_inode(inode, ufs_inode + ufs_inotofsbo(inode->i_ino));
+ err = ufs1_read_inode(inode,
+ ufs_inode + ufs_inotofsbo(inode->i_ino));
}
+ if (err)
+ goto bad_inode;
inode->i_version++;
ufsi->i_lastfrag =
(inode->i_size + uspi->s_fsize - 1) >> uspi->s_fshift;
loff_t old_i_size;
truncate_inode_pages(&inode->i_data, 0);
+ if (is_bad_inode(inode))
+ goto no_delete;
/*UFS_I(inode)->i_dtime = CURRENT_TIME;*/
lock_kernel();
mark_inode_dirty(inode);
ufs_warning(inode->i_sb, __FUNCTION__, "ufs_truncate failed\n");
ufs_free_inode (inode);
unlock_kernel();
+ return;
+no_delete:
+ clear_inode(inode); /* We must guarantee clearing of inode... */
}
if (!xfs_buf_zone)
goto out_free_trace_buf;
- xfslogd_workqueue = create_freezeable_workqueue("xfslogd");
+ xfslogd_workqueue = create_workqueue("xfslogd");
if (!xfslogd_workqueue)
goto out_free_buf_zone;
- xfsdatad_workqueue = create_freezeable_workqueue("xfsdatad");
+ xfsdatad_workqueue = create_workqueue("xfsdatad");
if (!xfsdatad_workqueue)
goto out_destroy_xfslogd_workqueue;
/*
* exutils - interpreter/scanner utilities
*/
-void acpi_ex_enter_interpreter(void);
+acpi_status acpi_ex_enter_interpreter(void);
void acpi_ex_exit_interpreter(void);
-void acpi_ex_reacquire_interpreter(void);
-
-void acpi_ex_relinquish_interpreter(void);
-
void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc);
u8 acpi_ex_acquire_global_lock(u32 rule);
#define BAF_LEGACY_DEVICES 0x0001
#define BAF_8042_KEYBOARD_CONTROLLER 0x0002
+#define BAF_MSI_NOT_SUPPORTED 0x0008
#define FADT2_REVISION_ID 3
#define FADT2_MINUS_REVISION_ID 2
/* 64-bit integers */
-typedef u64 acpi_integer;
+typedef unsigned long long acpi_integer;
#define ACPI_INTEGER_MAX ACPI_UINT64_MAX
#define ACPI_INTEGER_BIT_SIZE 64
#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
# define __kernel_extbl(val, shift) __builtin_alpha_extbl(val, shift)
# define __kernel_extwl(val, shift) __builtin_alpha_extwl(val, shift)
# define __kernel_cmpbge(a, b) __builtin_alpha_cmpbge(a, b)
-# define __kernel_cttz(x) __builtin_ctzl(x)
-# define __kernel_ctlz(x) __builtin_clzl(x)
-# define __kernel_ctpop(x) __builtin_popcountl(x)
#else
# define __kernel_insbl(val, shift) \
({ unsigned long __kir; \
({ unsigned long __kir; \
__asm__("cmpbge %r2,%1,%0" : "=r"(__kir) : "rI"(b), "rJ"(a)); \
__kir; })
+#endif
+
+#ifdef __alpha_cix__
+# if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3
+# define __kernel_cttz(x) __builtin_ctzl(x)
+# define __kernel_ctlz(x) __builtin_clzl(x)
+# define __kernel_ctpop(x) __builtin_popcountl(x)
+# else
+# define __kernel_cttz(x) \
+ ({ unsigned long __kir; \
+ __asm__("cttz %1,%0" : "=r"(__kir) : "r"(x)); \
+ __kir; })
+# define __kernel_ctlz(x) \
+ ({ unsigned long __kir; \
+ __asm__("ctlz %1,%0" : "=r"(__kir) : "r"(x)); \
+ __kir; })
+# define __kernel_ctpop(x) \
+ ({ unsigned long __kir; \
+ __asm__("ctpop %1,%0" : "=r"(__kir) : "r"(x)); \
+ __kir; })
+# endif
+#else
# define __kernel_cttz(x) \
({ unsigned long __kir; \
- __asm__("cttz %1,%0" : "=r"(__kir) : "r"(x)); \
+ __asm__(".arch ev67; cttz %1,%0" : "=r"(__kir) : "r"(x)); \
__kir; })
# define __kernel_ctlz(x) \
({ unsigned long __kir; \
- __asm__("ctlz %1,%0" : "=r"(__kir) : "r"(x)); \
+ __asm__(".arch ev67; ctlz %1,%0" : "=r"(__kir) : "r"(x)); \
__kir; })
# define __kernel_ctpop(x) \
({ unsigned long __kir; \
- __asm__("ctpop %1,%0" : "=r"(__kir) : "r"(x)); \
+ __asm__(".arch ev67; ctpop %1,%0" : "=r"(__kir) : "r"(x)); \
__kir; })
#endif
#else
#define __kernel_ldbu(mem) \
({ unsigned char __kir; \
- __asm__("ldbu %0,%1" : "=r"(__kir) : "m"(mem)); \
+ __asm__(".arch ev56; \
+ ldbu %0,%1" : "=r"(__kir) : "m"(mem)); \
__kir; })
#define __kernel_ldwu(mem) \
({ unsigned short __kir; \
- __asm__("ldwu %0,%1" : "=r"(__kir) : "m"(mem)); \
+ __asm__(".arch ev56; \
+ ldwu %0,%1" : "=r"(__kir) : "m"(mem)); \
__kir; })
-#define __kernel_stb(val,mem) \
- __asm__("stb %1,%0" : "=m"(mem) : "r"(val))
-#define __kernel_stw(val,mem) \
- __asm__("stw %1,%0" : "=m"(mem) : "r"(val))
+#define __kernel_stb(val,mem) \
+ __asm__(".arch ev56; \
+ stb %1,%0" : "=m"(mem) : "r"(val))
+#define __kernel_stw(val,mem) \
+ __asm__(".arch ev56; \
+ stw %1,%0" : "=m"(mem) : "r"(val))
#endif
#ifdef __KERNEL__
*
*/
+#define MCPCIA_MAX_HOSES 4
+
#define MCPCIA_MID(m) ((unsigned long)(m) << 33)
/* Dodge has PCI0 and PCI1 at MID 4 and 5 respectively.
unsigned long bus = phys + __direct_map_base;
return phys <= __direct_map_size ? bus : 0;
}
+#define isa_virt_to_bus virt_to_bus
static inline void *bus_to_virt(unsigned long address)
{
#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l))
#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l))
-static inline int
-check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature,
- int length)
-{
- int retval = 0;
- do {
- if (readb(bus_addr) != *signature)
- goto out;
- bus_addr++;
- signature++;
- length--;
- } while (length);
- retval = 1;
-out:
- return retval;
-}
-
#endif
#ifndef CONFIG_PCI
#ifndef __ASM_ARCH_CLOCK_H
#define __ASM_ARCH_CLOCK_H
+static inline u32 ns9xxx_systemclock(void) __attribute__((const));
static inline u32 ns9xxx_systemclock(void)
{
/*
return 353894400;
}
-static inline const u32 ns9xxx_cpuclock(void)
+static inline u32 ns9xxx_cpuclock(void) __attribute__((const));
+static inline u32 ns9xxx_cpuclock(void)
{
return ns9xxx_systemclock() / 2;
}
-static inline const u32 ns9xxx_ahbclock(void)
+static inline u32 ns9xxx_ahbclock(void) __attribute__((const));
+static inline u32 ns9xxx_ahbclock(void)
{
return ns9xxx_systemclock() / 4;
}
-static inline const u32 ns9xxx_bbusclock(void)
+static inline u32 ns9xxx_bbusclock(void) __attribute__((const));
+static inline u32 ns9xxx_bbusclock(void)
{
return ns9xxx_systemclock() / 8;
}
#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT)
#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT)
#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT)
-#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_OUT)
+#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN)
#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN)
/*
#ifdef __KERNEL__
+#include <asm/memory.h>
#define CPU_ARCH_UNKNOWN 0
#define CPU_ARCH_ARMv3 1
#define vectors_high() (0)
#endif
-#if __LINUX_ARM_ARCH__ >= 6
+#if defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ >= 6
#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
: : "r" (0) : "memory")
#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#endif
-#define mb() barrier()
-#define rmb() barrier()
-#define wmb() barrier()
-#define read_barrier_depends() do { } while(0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() dmb()
-#define smp_rmb() dmb()
-#define smp_wmb() dmb()
-#define smp_read_barrier_depends() read_barrier_depends()
+#ifndef CONFIG_SMP
+#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() read_barrier_depends()
-#endif /* CONFIG_SMP */
+#define mb() dmb()
+#define rmb() dmb()
+#define wmb() dmb()
+#define smp_mb() dmb()
+#define smp_rmb() dmb()
+#define smp_wmb() dmb()
+#endif
+#define read_barrier_depends() do { } while(0)
+#define smp_read_barrier_depends() do { } while(0)
#define set_mb(var, value) do { var = value; smp_mb(); } while (0)
#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
/* 346 for epoll_pwait */
-#define __NR_sys_kexec_load (__NR_SYSCALL_BASE+347)
+#define __NR_kexec_load (__NR_SYSCALL_BASE+347)
/*
* The following SWIs are ARM private.
#ifndef __HAVE_ARCH_ENTER_LAZY_MMU_MODE
#define arch_enter_lazy_mmu_mode() do {} while (0)
#define arch_leave_lazy_mmu_mode() do {} while (0)
+#define arch_flush_lazy_mmu_mode() do {} while (0)
#endif
/*
#ifndef __HAVE_ARCH_ENTER_LAZY_CPU_MODE
#define arch_enter_lazy_cpu_mode() do {} while (0)
#define arch_leave_lazy_cpu_mode() do {} while (0)
+#define arch_flush_lazy_cpu_mode() do {} while (0)
#endif
/*
#define ARCH_APICTIMER_STOPS_ON_C3 1
extern int timer_over_8254;
+extern int local_apic_timer_c2_ok;
#else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { }
#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_LAPIC_TIMER_BROKEN (3*32+ 14) /* lapic timer broken in C1 */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
pr_reg[4] = regs->edi; \
pr_reg[5] = regs->ebp; \
pr_reg[6] = regs->eax; \
- pr_reg[7] = regs->xds; \
- pr_reg[8] = regs->xes; \
- pr_reg[9] = regs->xfs; \
+ pr_reg[7] = regs->xds & 0xffff; \
+ pr_reg[8] = regs->xes & 0xffff; \
+ pr_reg[9] = regs->xfs & 0xffff; \
savesegment(gs,pr_reg[10]); \
pr_reg[11] = regs->orig_eax; \
pr_reg[12] = regs->eip; \
- pr_reg[13] = regs->xcs; \
+ pr_reg[13] = regs->xcs & 0xffff; \
pr_reg[14] = regs->eflags; \
pr_reg[15] = regs->esp; \
- pr_reg[16] = regs->xss;
+ pr_reg[16] = regs->xss & 0xffff;
/* This yields a mask that user programs can use to figure out what
instruction set this CPU supports. This could be done in user space,
#define MSR_K7_FID_VID_CTL 0xC0010041
#define MSR_K7_FID_VID_STATUS 0xC0010042
+#define MSR_K8_ENABLE_C1E 0xC0010055
+
/* extended feature register */
#define MSR_EFER 0xc0000080
#define PARAVIRT_LAZY_NONE 0
#define PARAVIRT_LAZY_MMU 1
#define PARAVIRT_LAZY_CPU 2
+#define PARAVIRT_LAZY_FLUSH 3
#define __HAVE_ARCH_ENTER_LAZY_CPU_MODE
#define arch_enter_lazy_cpu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_CPU)
#define arch_leave_lazy_cpu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_NONE)
+#define arch_flush_lazy_cpu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_FLUSH)
#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
#define arch_enter_lazy_mmu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_MMU)
#define arch_leave_lazy_mmu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_NONE)
+#define arch_flush_lazy_mmu_mode() paravirt_ops.set_lazy_mode(PARAVIRT_LAZY_FLUSH)
/* These all sit in the .parainstructions section to tell us what to patch. */
struct paravirt_patch {
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CIBAUD 002003600000
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
unsigned int a, b;
};
-#define desc_empty(desc) (!((desc)->a + (desc)->b))
+#define desc_empty(desc) (!((desc)->a | (desc)->b))
#define desc_equal(desc1, desc2) (((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
#define GDT_ENTRY_TLS_ENTRIES 3
#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \
asic == PCIIO_ASIC_TYPE_TIOCP)
#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC)
+#define IS_TIOCP_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP)
/*
* Bridge PMU Address Transaltion Entry Attibutes
*/
#define PCI32_ATE_V (0x1 << 0)
-#define PCI32_ATE_CO (0x1 << 1)
-#define PCI32_ATE_PREC (0x1 << 2)
+#define PCI32_ATE_CO (0x1 << 1) /* PIC ASIC ONLY */
+#define PCI32_ATE_PIO (0x1 << 1) /* TIOCP ASIC ONLY */
#define PCI32_ATE_MSI (0x1 << 2)
#define PCI32_ATE_PREF (0x1 << 3)
#define PCI32_ATE_BAR (0x1 << 4)
#define BUG_ON(condition) \
do { \
- __asm__ __volatile__("tne $0, %0" : : "r" (condition)); \
+ __asm__ __volatile__("tne $0, %0, %1" \
+ : : "r" (condition), "i" (BRK_BUG)); \
} while (0)
#define HAVE_ARCH_BUG_ON
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define ARCH_HAS_FLUSH_ANON_PAGE
+extern void __flush_anon_page(struct page *, unsigned long);
+static inline void flush_anon_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vmaddr)
+{
+ if (cpu_has_dc_aliases && PageAnon(page))
+ __flush_anon_page(page, vmaddr);
+}
+
static inline void flush_icache_page(struct vm_area_struct *vma,
struct page *page)
{
/* Run kernel code uncached, useful for cache probing functions. */
unsigned long __init run_uncached(void *func);
+extern void *kmap_coherent(struct page *page, unsigned long addr);
+extern void kunmap_coherent(struct page *page);
+
#endif /* _ASM_CACHEFLUSH_H */
#else
"r" (proto + len),
#endif
- "r" (sum));
+ "r" ((__force unsigned long)sum));
return sum;
}
__delay(usecs);
}
-#define __udelay_val cpu_data[smp_processor_id()].udelay_val
+#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
#define udelay(usecs) __udelay((usecs),__udelay_val)
/* We don't care about the c0 hazard here */ \
} while (0)
-#define __fpu_enabled() (read_c0_status() & ST0_CU1)
-
#define enable_fpu() \
do { \
if (cpu_has_fpu) \
set_thread_flag(TIF_USEDFPU);
}
-static inline void own_fpu(int restore)
+static inline void own_fpu_inatomic(int restore)
{
- preempt_disable();
if (cpu_has_fpu && !__is_fpu_owner()) {
__own_fpu();
if (restore)
_restore_fp(current);
}
+}
+
+static inline void own_fpu(int restore)
+{
+ preempt_disable();
+ own_fpu_inatomic(restore);
preempt_enable();
}
return tsk->thread.fpu.fpr;
}
-static inline void enable_fp_in_kernel(void)
-{
- set_thread_flag(TIF_ALLOW_FP_IN_KERNEL);
- /* make sure CU1 and FPU ownership are consistent */
- if (!__is_fpu_owner() && __fpu_enabled())
- __disable_fpu();
-}
-
-static inline void disable_fp_in_kernel(void)
-{
- BUG_ON(!__is_fpu_owner() && __fpu_enabled());
- clear_thread_flag(TIF_ALLOW_FP_IN_KERNEL);
-}
-
#endif /* _ASM_FPU_H */
_ehb
)
ASMMACRO(irq_enable_hazard,
+ _ehb
)
ASMMACRO(irq_disable_hazard,
_ehb
#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
#include <asm/hazards.h>
-/*
- * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred IPIs,
- * at the cost of branch and call overhead on each local_irq_restore()
- */
-
-#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
-
-extern void smtc_ipi_replay(void);
-
-#define irq_restore_epilog(flags) \
-do { \
- if (!(flags & 0x0400)) \
- smtc_ipi_replay(); \
-} while (0)
-
-#else
-
-#define irq_restore_epilog(ignore) do { } while (0)
-
-#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
-
__asm__ (
" .macro raw_local_irq_enable \n"
" .set push \n"
" .set pop \n"
" .endm \n");
-#define raw_local_irq_restore(flags) \
-do { \
- unsigned long __tmp1; \
- \
- __asm__ __volatile__( \
- "raw_local_irq_restore\t%0" \
- : "=r" (__tmp1) \
- : "0" (flags) \
- : "memory"); \
- irq_restore_epilog(flags); \
-} while(0)
+extern void smtc_ipi_replay(void);
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
+ /*
+ * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred
+ * IPIs, at the cost of branch and call overhead on each
+ * local_irq_restore()
+ */
+ if (unlikely(!(flags & 0x0400)))
+ smtc_ipi_replay();
+#endif
+
+ __asm__ __volatile__(
+ "raw_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+}
static inline int raw_irqs_disabled_flags(unsigned long flags)
{
};
extern void ll_mv64340_irq(void);
+extern void mv64340_irq_init(unsigned int base);
#endif /* __ASM_MIPS_MARVELL_H */
{
return pud_val(pud);
}
-#define pud_phys(pud) (pud_val(pud) - PAGE_OFFSET)
+#define pud_phys(pud) virt_to_phys((void *)pud_val(pud))
#define pud_page(pud) (pfn_to_page(pud_phys(pud) >> PAGE_SHIFT))
/* Find an entry in the second-level page table.. */
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
-#define pmd_phys(pmd) (pmd_val(pmd) - PAGE_OFFSET)
+#define pmd_phys(pmd) virt_to_phys((void *)pmd_val(pmd))
#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
#define pmd_page_vaddr(pmd) pmd_val(pmd)
register signed int __a2 __asm__("$5") = (int) (long) (a2); \
register signed int __a3 __asm__("$6") = (int) (long) (a3); \
register signed int __a4 __asm__("$7") = (int) (long) (a4); \
- register signed int __a5 = (a5); \
+ register signed int __a5 = (int) (long) (a5); \
long __vec = (long) romvec->dest; \
__asm__ __volatile__( \
"dsubu\t$29, 32\n\t" \
#endif
-#define IOADDR(a) ((volatile void __iomem *)(IO_BASE + (a)))
+#define IOADDR(a) ((void __iomem *)(IO_BASE + (a)))
#endif
#define K_SYS_REVISION_BCM112x_A2 0x21
#define K_SYS_REVISION_BCM112x_A3 0x22
#define K_SYS_REVISION_BCM112x_A4 0x23
+#define K_SYS_REVISION_BCM112x_B0 0x30
#define K_SYS_REVISION_BCM1480_S0 0x01
#define K_SYS_REVISION_BCM1480_A1 0x02
spin_unlock_irqrestore(&q->lock, flags);
}
-static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
+static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q)
{
struct smtc_ipi *p;
- long flags;
- spin_lock_irqsave(&q->lock, flags);
if (q->head == NULL)
p = NULL;
else {
if (q->head == NULL)
q->tail = NULL;
}
+
+ return p;
+}
+
+static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+ unsigned long flags;
+ struct smtc_ipi *p;
+
+ spin_lock_irqsave(&q->lock, flags);
+ p = __smtc_ipi_dq(q);
spin_unlock_irqrestore(&q->lock, flags);
+
return p;
}
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
#define TIF_FREEZE 19
-#define TIF_ALLOW_FP_IN_KERNEL 20
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define PLPAR_HCALL_BUFSIZE 4
long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
+/**
+ * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used when phyp interface needs to be called in real mode. Similar to
+ * plpar_hcall, but plpar_hcall_raw works in real mode and does not
+ * calculate hypervisor call statistics.
+ */
+long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
+
/**
* plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
* @opcode: The hypervisor call to make.
u8 uccs; /* UCCx status register */
u8 res3[0x24];
__be16 utpt;
+ u8 res4[0x52];
u8 guemr; /* UCC general extended mode register */
- u8 res4[0x200 - 0x091];
+ u8 res5[0x200 - 0x091];
} __attribute__ ((packed));
/* QE UCC Fast */
SYSCALL_SPU(unshare)
SYSCALL_SPU(splice)
SYSCALL_SPU(tee)
-SYSCALL_SPU(vmsplice)
+COMPAT_SYS_SPU(vmsplice)
COMPAT_SYS_SPU(openat)
SYSCALL_SPU(mkdirat)
SYSCALL_SPU(mknodat)
unsigned short len, unsigned short proto,
__wsum sum)
{
-#ifndef __s390x__
- asm volatile(
- " alr %0,%1\n" /* sum += saddr */
- " brc 12,0f\n"
- " ahi %0,1\n" /* add carry */
- "0:"
- : "+&d" (sum) : "d" (saddr) : "cc");
- asm volatile(
- " alr %0,%1\n" /* sum += daddr */
- " brc 12,1f\n"
- " ahi %0,1\n" /* add carry */
- "1:"
- : "+&d" (sum) : "d" (daddr) : "cc");
- asm volatile(
- " alr %0,%1\n" /* sum += len + proto */
- " brc 12,2f\n"
- " ahi %0,1\n" /* add carry */
- "2:"
- : "+&d" (sum)
- : "d" (len + proto)
- : "cc");
-#else /* __s390x__ */
- asm volatile(
- " lgfr %0,%0\n"
- " algr %0,%1\n" /* sum += saddr */
- " brc 12,0f\n"
- " aghi %0,1\n" /* add carry */
- "0: algr %0,%2\n" /* sum += daddr */
- " brc 12,1f\n"
- " aghi %0,1\n" /* add carry */
- "1: algfr %0,%3\n" /* sum += len + proto */
- " brc 12,2f\n"
- " aghi %0,1\n" /* add carry */
- "2: srlg 0,%0,32\n"
- " alr %0,0\n" /* fold to 32 bits */
- " brc 12,3f\n"
- " ahi %0,1\n" /* add carry */
- "3: llgfr %0,%0"
- : "+&d" (sum)
- : "d" (saddr), "d" (daddr),
- "d" (len + proto)
- : "cc", "0");
-#endif /* __s390x__ */
- return sum;
+ __u32 csum = (__force __u32)sum;
+
+ csum += (__force __u32)saddr;
+ if (csum < (__force __u32)saddr)
+ csum++;
+
+ csum += (__force __u32)daddr;
+ if (csum < (__force __u32)daddr)
+ csum++;
+
+ csum += len + proto;
+ if (csum < len + proto)
+ csum++;
+
+ return (__force __wsum)csum;
}
/*
*
*/
-#define HP680_BTN_IRQ IRQ0_IRQ
-#define HP680_TS_IRQ IRQ3_IRQ
-#define HP680_HD64461_IRQ IRQ4_IRQ
+#define HP680_BTN_IRQ 32 /* IRQ0_IRQ */
+#define HP680_TS_IRQ 35 /* IRQ3_IRQ */
+#define HP680_HD64461_IRQ 36 /* IRQ4_IRQ */
#define DAC_LCD_BRIGHTNESS 0
#define DAC_SPEAKER_VOLUME 1
*/
#include <linux/irqflags.h>
+#include <linux/compiler.h>
#include <asm/types.h>
/*
unsigned long r_address; /* relocation addr */
unsigned int r_index:24; /* segment index or symbol index */
unsigned int r_extern:1; /* if F, r_index==SEG#; if T, SYM idx */
- int r_pad:2; /* <unused> */
+ unsigned int r_pad:2; /* <unused> */
enum reloc_type r_type:5; /* type of relocation to perform */
long r_addend; /* addend for relocation value */
};
#define MSTK_DOW_MASK 0x07
#define MSTK_DOM_MASK 0x3f
#define MSTK_MONTH_MASK 0x1f
-#define MSTK_YEAR_MASK 0xff
+#define MSTK_YEAR_MASK 0xffU
/* Binary coded decimal conversion macros. */
#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
unsigned int r_address; /* relocation addr */
unsigned int r_index:24; /* segment index or symbol index */
unsigned int r_extern:1; /* if F, r_index==SEG#; if T, SYM idx */
- int r_pad:2; /* <unused> */
+ unsigned int r_pad:2; /* <unused> */
enum reloc_type r_type:5; /* type of relocation to perform */
int r_addend; /* addend for relocation value */
};
#define MSTK_DOW_MASK 0x07
#define MSTK_DOM_MASK 0x3f
#define MSTK_MONTH_MASK 0x1f
-#define MSTK_YEAR_MASK 0xff
+#define MSTK_YEAR_MASK 0xffU
/* Binary coded decimal conversion macros. */
#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
PROVIDE (_unprotected_end = .);
. = ALIGN(4096);
+ .note : { *(.note.*) }
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
#ifndef __UM_DELAY_H
#define __UM_DELAY_H
-#include "asm/arch/delay.h"
-#include "asm/archparam.h"
-
#define MILLION 1000000
+/* Undefined on purpose */
+extern void __bad_udelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) ((__builtin_constant_p(n) && (n) > 20000) ? \
+ __bad_udelay() : __udelay(n))
+
+/* It appears that ndelay is not used at all for UML, and has never been
+ * implemented. */
+extern void __unimplemented_ndelay(void);
+#define ndelay(n) __unimplemented_ndelay()
+
#endif
((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
/*
- * Bits 0 through 3 are taken
+ * Bits 0 through 4 are taken
*/
-#define PTE_FILE_MAX_BITS 28
+#define PTE_FILE_MAX_BITS 27
-#define pte_to_pgoff(pte) (pte_val(pte) >> 4)
+#define pte_to_pgoff(pte) (pte_val(pte) >> 5)
-#define pgoff_to_pte(off) ((pte_t) { ((off) << 4) + _PAGE_FILE })
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 5) + _PAGE_FILE })
#endif
#define ARCH_APICTIMER_STOPS_ON_C3 1
extern unsigned boot_cpu_id;
+extern int local_apic_timer_c2_ok;
#endif /* __ASM_APIC_H */
#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
/*
- * Vectors 0x20-0x2f are used for ISA interrupts.
+ * Vectors 0x30-0x3f are used for ISA interrupts.
*/
#define IRQ0_VECTOR FIRST_EXTERNAL_VECTOR + 0x10
#define IRQ1_VECTOR IRQ0_VECTOR + 1
ATA_MAX_DEVICES = 2, /* per bus/port */
ATA_MAX_PRD = 256, /* we could make these 256/256 */
ATA_SECT_SIZE = 512,
+ ATA_MAX_SECTORS_128 = 128,
ATA_MAX_SECTORS = 256,
ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */
#endif /* CONFIG_HAVE_ARCH_ALLOC_REMAP */
extern unsigned long __meminitdata nr_kernel_pages;
-extern unsigned long nr_all_pages;
+extern unsigned long __meminitdata nr_all_pages;
extern void *alloc_large_system_hash(const char *tablename,
unsigned long bucketsize,
# define __acquire(x) __context__(x,1)
# define __release(x) __context__(x,-1)
# define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0)
-extern void __chk_user_ptr(void __user *);
-extern void __chk_io_ptr(void __iomem *);
+extern void __chk_user_ptr(const void __user *);
+extern void __chk_io_ptr(const void __iomem *);
#else
# define __user
# define __kernel
#endif /* CONFIG_HOTPLUG_CPU */
#ifdef CONFIG_SUSPEND_SMP
+extern int suspend_cpu_hotplug;
+
extern int disable_nonboot_cpus(void);
extern void enable_nonboot_cpus(void);
#else
+#define suspend_cpu_hotplug 0
+
static inline int disable_nonboot_cpus(void) { return 0; }
static inline void enable_nonboot_cpus(void) {}
#endif
struct module * owner;
const char * mod_name; /* used for built-in modules */
+ struct module_kobject * mkobj;
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
/*
* On x86-64 make the 64bit structure have the same alignment as the
* 32bit structure. This makes 32bit emulation easier.
+ *
+ * UML/x86_64 needs the same packing as x86_64 - UML + UML_X86 +
+ * 64_BIT adds up to UML/x86_64.
*/
#ifdef __x86_64__
#define EPOLL_PACKED __attribute__((packed))
#else
+#if defined(CONFIG_UML) && defined(CONFIG_UML_X86) && defined(CONFIG_64BIT)
+#define EPOLL_PACKED __attribute__((packed))
+#else
#define EPOLL_PACKED
#endif
+#endif
struct epoll_event {
__u32 events;
struct clock_event_device;
extern void clock_was_set(void);
+extern void hres_timers_resume(void);
extern void hrtimer_interrupt(struct clock_event_device *dev);
/*
*/
static inline void clock_was_set(void) { }
+static inline void hres_timers_resume(void) { }
+
/*
* In non high resolution mode the time reference is taken from
* the base softirq time variable.
u8 init_speed; /* transfer rate set at boot */
u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */
u8 current_speed; /* current transfer rate set */
+ u8 desired_speed; /* desired transfer rate set */
u8 dn; /* now wide spread use */
u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
int (*expiry)(ide_drive_t *);
/* ide_system_bus_speed */
int pio_clock;
+ int req_gen;
+ int req_gen_timer;
unsigned char cmd_buf[4];
} ide_hwgroup_t;
/*
* Managed iomap interface
*/
+#ifdef CONFIG_HAS_IOPORT
void __iomem * devm_ioport_map(struct device *dev, unsigned long port,
unsigned int nr);
void devm_ioport_unmap(struct device *dev, void __iomem *addr);
+#else
+static inline void __iomem *devm_ioport_map(struct device *dev,
+ unsigned long port,
+ unsigned int nr)
+{
+ return NULL;
+}
+
+static inline void devm_ioport_unmap(struct device *dev, void __iomem *addr)
+{
+}
+#endif
void __iomem * devm_ioremap(struct device *dev, unsigned long offset,
unsigned long size);
#ifdef CONFIG_SYSVIPC
#define INIT_IPC_NS(ns) .ns = &init_ipc_ns,
+extern int copy_ipcs(unsigned long flags, struct task_struct *tsk);
#else
#define INIT_IPC_NS(ns)
+static inline int copy_ipcs(unsigned long flags, struct task_struct *tsk)
+{ return 0; }
#endif
#ifdef CONFIG_IPC_NS
extern void free_ipc_ns(struct kref *kref);
-extern int copy_ipcs(unsigned long flags, struct task_struct *tsk);
extern int unshare_ipcs(unsigned long flags, struct ipc_namespace **ns);
-#else
-static inline int copy_ipcs(unsigned long flags, struct task_struct *tsk)
-{
- return 0;
-}
#endif
static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
#endif
#endif
__s32 proxy_ndp;
+ __s32 accept_source_route;
void *sysctl;
};
DEVCONF_RTR_PROBE_INTERVAL,
DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
DEVCONF_PROXY_NDP,
+ __DEVCONF_OPTIMISTIC_DAD,
+ DEVCONF_ACCEPT_SOURCE_ROUTE,
DEVCONF_MAX
};
return dev & 0x3ffff;
}
-bool is_lanana_major(unsigned int major);
-
#else /* __KERNEL__ */
/*
ATA_HORKAGE_DIAGNOSTIC = (1 << 0), /* Failed boot diag */
ATA_HORKAGE_NODMA = (1 << 1), /* DMA problems */
ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */
+ ATA_HORKAGE_MAX_SEC_128 = (1 << 3), /* Limit max sects to 128 */
+ ATA_HORKAGE_DMA_RW_ONLY = (1 << 4), /* ATAPI DMA for RW only */
};
enum hsm_task_states {
HSM_ST_IDLE, /* no command on going */
+ HSM_ST_FIRST, /* (waiting the device to)
+ write CDB or first data block */
HSM_ST, /* (waiting the device to) transfer data */
HSM_ST_LAST, /* (waiting the device to) complete command */
HSM_ST_ERR, /* error */
- HSM_ST_FIRST, /* (waiting the device to)
- write CDB or first data block */
};
enum ata_completion_errors {
# define INIT_LOCKDEP .lockdep_recursion = 0,
-#define lockdep_depth(tsk) ((tsk)->lockdep_depth)
+#define lockdep_depth(tsk) (debug_locks ? (tsk)->lockdep_depth : 0)
#else /* !LOCKDEP */
#define PG_NEED_COMMIT 1
#define PG_NEED_RESCHED 2
#define PG_NEED_FLUSH 3
-#define PG_FLUSHING 4
struct nfs_inode;
struct nfs_page {
};
#define NFS_WBACK_BUSY(req) (test_bit(PG_BUSY,&(req)->wb_flags))
-#define NFS_NEED_COMMIT(req) (test_bit(PG_NEED_COMMIT,&(req)->wb_flags))
-#define NFS_NEED_RESCHED(req) (test_bit(PG_NEED_RESCHED,&(req)->wb_flags))
extern struct nfs_page *nfs_create_request(struct nfs_open_context *ctx,
struct inode *inode,
req->wb_list_head = NULL;
}
-static inline int
-nfs_defer_commit(struct nfs_page *req)
-{
- return !test_and_set_bit(PG_NEED_COMMIT, &req->wb_flags);
-}
-
-static inline void
-nfs_clear_commit(struct nfs_page *req)
-{
- smp_mb__before_clear_bit();
- clear_bit(PG_NEED_COMMIT, &req->wb_flags);
- smp_mb__after_clear_bit();
-}
-
-static inline int
-nfs_defer_reschedule(struct nfs_page *req)
-{
- return !test_and_set_bit(PG_NEED_RESCHED, &req->wb_flags);
-}
-
-static inline void
-nfs_clear_reschedule(struct nfs_page *req)
-{
- smp_mb__before_clear_bit();
- clear_bit(PG_NEED_RESCHED, &req->wb_flags);
- smp_mb__after_clear_bit();
-}
-
static inline struct nfs_page *
nfs_list_entry(struct list_head *head)
{
loff_t *, size_t, unsigned int,
splice_actor *);
+extern ssize_t __splice_from_pipe(struct pipe_inode_info *, struct file *,
+ loff_t *, size_t, unsigned int,
+ splice_actor *);
+
#endif
#endif
/**
- * #PLIST_HEAD_INIT - static struct plist_head initializer
- *
+ * PLIST_HEAD_INIT - static struct plist_head initializer
* @head: struct plist_head variable name
+ * @_lock: lock to initialize for this list
*/
#define PLIST_HEAD_INIT(head, _lock) \
{ \
}
/**
- * #PLIST_NODE_INIT - static struct plist_node initializer
- *
+ * PLIST_NODE_INIT - static struct plist_node initializer
* @node: struct plist_node variable name
* @__prio: initial node priority
*/
/**
* plist_head_init - dynamic struct plist_head initializer
- *
* @head: &struct plist_head pointer
+ * @lock: list spinlock, remembered for debugging
*/
static inline void
plist_head_init(struct plist_head *head, spinlock_t *lock)
/**
* plist_node_init - Dynamic struct plist_node initializer
- *
* @node: &struct plist_node pointer
* @prio: initial node priority
*/
/**
* plist_for_each - iterate over the plist
- *
- * @pos1: the type * to use as a loop counter.
- * @head: the head for your list.
+ * @pos: the type * to use as a loop counter
+ * @head: the head for your list
*/
#define plist_for_each(pos, head) \
list_for_each_entry(pos, &(head)->node_list, plist.node_list)
/**
- * plist_for_each_entry_safe - iterate over a plist of given type safe
- * against removal of list entry
+ * plist_for_each_safe - iterate safely over a plist of given type
+ * @pos: the type * to use as a loop counter
+ * @n: another type * to use as temporary storage
+ * @head: the head for your list
*
- * @pos1: the type * to use as a loop counter.
- * @n1: another type * to use as temporary storage
- * @head: the head for your list.
+ * Iterate over a plist of given type, safe against removal of list entry.
*/
#define plist_for_each_safe(pos, n, head) \
list_for_each_entry_safe(pos, n, &(head)->node_list, plist.node_list)
/**
* plist_for_each_entry - iterate over list of given type
- *
- * @pos: the type * to use as a loop counter.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
+ * @pos: the type * to use as a loop counter
+ * @head: the head for your list
+ * @mem: the name of the list_struct within the struct
*/
#define plist_for_each_entry(pos, head, mem) \
list_for_each_entry(pos, &(head)->node_list, mem.plist.node_list)
/**
- * plist_for_each_entry_safe - iterate over list of given type safe against
- * removal of list entry
- *
- * @pos: the type * to use as a loop counter.
+ * plist_for_each_entry_safe - iterate safely over list of given type
+ * @pos: the type * to use as a loop counter
* @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @m: the name of the list_struct within the struct.
+ * @head: the head for your list
+ * @m: the name of the list_struct within the struct
+ *
+ * Iterate over list of given type, safe against removal of list entry.
*/
#define plist_for_each_entry_safe(pos, n, head, m) \
list_for_each_entry_safe(pos, n, &(head)->node_list, m.plist.node_list)
/**
* plist_head_empty - return !0 if a plist_head is empty
- *
* @head: &struct plist_head pointer
*/
static inline int plist_head_empty(const struct plist_head *head)
/**
* plist_node_empty - return !0 if plist_node is not on a list
- *
* @node: &struct plist_node pointer
*/
static inline int plist_node_empty(const struct plist_node *node)
/**
* plist_first_entry - get the struct for the first entry
- *
- * @ptr: the &struct plist_head pointer.
- * @type: the type of the struct this is embedded in.
- * @member: the name of the list_struct within the struct.
+ * @head: the &struct plist_head pointer
+ * @type: the type of the struct this is embedded in
+ * @member: the name of the list_struct within the struct
*/
#ifdef CONFIG_DEBUG_PI_LIST
# define plist_first_entry(head, type, member) \
/**
* plist_first - return the first node (and thus, highest priority)
- *
* @head: the &struct plist_head pointer
*
* Assumes the plist is _not_ empty.
* for reporting to userspace and storing
* in superblock.
*/
+ struct work_struct del_work; /* used for delayed sysfs removal */
};
struct mddev_s
* @sk: Socket we are owned by
* @tstamp: Time we arrived
* @dev: Device we arrived on/are leaving by
- * @input_dev: Device we arrived on
+ * @iif: ifindex of device we arrived on
* @h: Transport layer header
* @nh: Network layer header
* @mac: Link layer header
struct sock *sk;
struct skb_timeval tstamp;
struct net_device *dev;
- struct net_device *input_dev;
+ int iif;
+ /* 4 byte hole on 64 bit*/
union {
struct tcphdr *th;
return __alloc_skb(size, priority, 1, -1);
}
-extern struct sk_buff *alloc_skb_from_cache(struct kmem_cache *cp,
- unsigned int size,
- gfp_t priority);
extern void kfree_skbmem(struct sk_buff *skb);
extern struct sk_buff *skb_clone(struct sk_buff *skb,
gfp_t priority);
list->qlen = 0;
}
+static inline void skb_queue_head_init_class(struct sk_buff_head *list,
+ struct lock_class_key *class)
+{
+ skb_queue_head_init(list);
+ lockdep_set_class(&list->lock, class);
+}
+
/*
* Insert an sk_buff at the start of a list.
*
--- /dev/null
+#ifndef _SONYLAPTOP_H_
+#define _SONYLAPTOP_H_
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+
+/* used only for communication between v4l and sony-laptop */
+
+#define SONY_PIC_COMMAND_GETCAMERA 1 /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERA 2
+#define SONY_PIC_COMMAND_GETCAMERABRIGHTNESS 3 /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERABRIGHTNESS 4
+#define SONY_PIC_COMMAND_GETCAMERACONTRAST 5 /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERACONTRAST 6
+#define SONY_PIC_COMMAND_GETCAMERAHUE 7 /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAHUE 8
+#define SONY_PIC_COMMAND_GETCAMERACOLOR 9 /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERACOLOR 10
+#define SONY_PIC_COMMAND_GETCAMERASHARPNESS 11 /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERASHARPNESS 12
+#define SONY_PIC_COMMAND_GETCAMERAPICTURE 13 /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAPICTURE 14
+#define SONY_PIC_COMMAND_GETCAMERAAGC 15 /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAAGC 16
+#define SONY_PIC_COMMAND_GETCAMERADIRECTION 17 /* obsolete */
+#define SONY_PIC_COMMAND_GETCAMERAROMVERSION 18 /* obsolete */
+#define SONY_PIC_COMMAND_GETCAMERAREVISION 19 /* obsolete */
+
+int sony_pic_camera_command(int command, u8 value);
+
+#endif /* __KERNEL__ */
+
+#endif /* _SONYLAPTOP_H_ */
NET_IPV6_RTR_PROBE_INTERVAL=21,
NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
NET_IPV6_PROXY_NDP=23,
+ NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
__NET_IPV6_MAX
};
*/
-#define TASKSTATS_VERSION 3
+#define TASKSTATS_VERSION 4
#define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN
* in linux/sched.h */
/* Delay waiting for cpu, while runnable
* count, delay_total NOT updated atomically
*/
- __u64 cpu_count;
+ __u64 cpu_count __attribute__((aligned(8)));
__u64 cpu_delay_total;
/* Following four fields atomically updated using task->delays->lock */
/* Basic Accounting Fields start */
char ac_comm[TS_COMM_LEN]; /* Command name */
- __u8 ac_sched; /* Scheduling discipline */
+ __u8 ac_sched __attribute__((aligned(8)));
+ /* Scheduling discipline */
__u8 ac_pad[3];
- __u32 ac_uid; /* User ID */
+ __u32 ac_uid __attribute__((aligned(8)));
+ /* User ID */
__u32 ac_gid; /* Group ID */
__u32 ac_pid; /* Process ID */
__u32 ac_ppid; /* Parent process ID */
__u32 ac_btime; /* Begin time [sec since 1970] */
- __u64 ac_etime; /* Elapsed time [usec] */
+ __u64 ac_etime __attribute__((aligned(8)));
+ /* Elapsed time [usec] */
__u64 ac_utime; /* User CPU time [usec] */
__u64 ac_stime; /* SYstem CPU time [usec] */
__u64 ac_minflt; /* Minor Page Fault Count */
static inline int copy_utsname(int flags, struct task_struct *tsk)
{
+ if (flags & CLONE_NEWUTS)
+ return -EINVAL;
return 0;
}
static inline void put_uts_ns(struct uts_namespace *ns)
/*
* This file define a set of standard wireless extensions
*
- * Version : 21 14.3.06
+ * Version : 22 16.3.07
*
* Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
- * Copyright (c) 1997-2006 Jean Tourrilhes, All Rights Reserved.
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
*/
#ifndef _LINUX_WIRELESS_H
* (there is some stuff that will be added in the future...)
* I just plan to increment with each new version.
*/
-#define WIRELESS_EXT 21
+#define WIRELESS_EXT 22
/*
* Changes :
* - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
* - Power/Retry relative values no longer * 100000
* - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ * - Prevent leaking of kernel space in stream on 64 bits.
*/
/**************************** CONSTANTS ****************************/
#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \
IW_EV_POINT_OFF)
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN (4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32))
+#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN (IW_EV_LCP_LEN + 4)
+
#endif /* _LINUX_WIRELESS_H */
#define SAA7146_HPS_SYNC_PORT_B 0x01
/* some memory sizes */
-#define SAA7146_CLIPPING_MEM (14*PAGE_SIZE)
+/* max. 16 clipping rectangles */
+#define SAA7146_CLIPPING_MEM (16 * 4 * sizeof(u32))
/* some defines for the various clipping-modes */
#define SAA7146_CLIPPING_RECT 0x4
int family;
struct list_head list;
int rule_size;
+ int addr_size;
int (*action)(struct fib_rule *,
struct flowi *, int,
__u16 fn_bit; /* bit key */
__u16 fn_flags;
__u32 fn_sernum;
+ struct rt6_info *rr_ptr;
};
#ifndef CONFIG_IPV6_SUBTREES
/*
* This file define the new driver API for Wireless Extensions
*
- * Version : 7 18.3.05
+ * Version : 8 16.3.07
*
* Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
- * Copyright (c) 2001-2006 Jean Tourrilhes, All Rights Reserved.
+ * Copyright (c) 2001-2007 Jean Tourrilhes, All Rights Reserved.
*/
#ifndef _IW_HANDLER_H
* will be needed...
* I just plan to increment with each new version.
*/
-#define IW_HANDLER_VERSION 7
+#define IW_HANDLER_VERSION 8
/*
* Changes :
* - Remove (struct iw_point *)->pointer from events and streams
* - Remove spy_offset from struct iw_handler_def
* - Add "check" version of event macros for ieee802.11 stack
+ *
+ * V7 to V8
+ * ----------
+ * - Prevent leaking of kernel space in stream on 64 bits.
*/
/**************************** CONSTANTS ****************************/
/* Check if it's possible */
if(likely((stream + event_len) < ends)) {
iwe->len = event_len;
- memcpy(stream, (char *) iwe, event_len);
+ /* Beware of alignement issues on 64 bits */
+ memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
+ memcpy(stream + IW_EV_LCP_LEN,
+ ((char *) iwe) + IW_EV_LCP_LEN,
+ event_len - IW_EV_LCP_LEN);
stream += event_len;
}
return stream;
/* Check if it's possible */
if(likely((stream + event_len) < ends)) {
iwe->len = event_len;
- memcpy(stream, (char *) iwe, IW_EV_LCP_LEN);
+ memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
memcpy(stream + IW_EV_LCP_LEN,
((char *) iwe) + IW_EV_LCP_LEN + IW_EV_POINT_OFF,
- IW_EV_POINT_LEN - IW_EV_LCP_LEN);
+ IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
memcpy(stream + IW_EV_POINT_LEN, extra, iwe->u.data.length);
stream += event_len;
}
/* Check if it's possible, set error if not */
if(likely((stream + event_len) < ends)) {
iwe->len = event_len;
- memcpy(stream, (char *) iwe, event_len);
+ /* Beware of alignement issues on 64 bits */
+ memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
+ memcpy(stream + IW_EV_LCP_LEN,
+ ((char *) iwe) + IW_EV_LCP_LEN,
+ event_len - IW_EV_LCP_LEN);
stream += event_len;
} else
*perr = -E2BIG;
/* Check if it's possible */
if(likely((stream + event_len) < ends)) {
iwe->len = event_len;
- memcpy(stream, (char *) iwe, IW_EV_LCP_LEN);
+ memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
memcpy(stream + IW_EV_LCP_LEN,
((char *) iwe) + IW_EV_LCP_LEN + IW_EV_POINT_OFF,
- IW_EV_POINT_LEN - IW_EV_LCP_LEN);
+ IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
memcpy(stream + IW_EV_POINT_LEN, extra, iwe->u.data.length);
stream += event_len;
} else
struct net_device *dev;
struct neigh_parms *next;
int (*neigh_setup)(struct neighbour *);
- void (*neigh_destructor)(struct neighbour *);
+ void (*neigh_cleanup)(struct neighbour *);
struct neigh_table *tbl;
void *sysctl_table;
static inline int
tcf_match_indev(struct sk_buff *skb, char *indev)
{
+ struct net_device *dev;
+
if (indev[0]) {
- if (!skb->input_dev)
+ if (!skb->iif)
return 0;
- if (strcmp(indev, skb->input_dev->name))
+ dev = __dev_get_by_index(skb->iif);
+ if (!dev || strcmp(indev, dev->name))
return 0;
}
void sctp_transport_raise_cwnd(struct sctp_transport *, __u32, __u32);
void sctp_transport_lower_cwnd(struct sctp_transport *, sctp_lower_cwnd_t);
unsigned long sctp_transport_timeout(struct sctp_transport *);
+void sctp_transport_reset(struct sctp_transport *);
/* This is the structure we use to queue packets as they come into
/* Prototypes. */
struct sctp_ulpq *sctp_ulpq_init(struct sctp_ulpq *,
struct sctp_association *);
+void sctp_ulpq_flush(struct sctp_ulpq *ulpq);
void sctp_ulpq_free(struct sctp_ulpq *);
/* Add a new DATA chunk for processing. */
shm_exit_ns(ns);
kfree(ns);
}
+#else
+int copy_ipcs(unsigned long flags, struct task_struct *tsk)
+{
+ if (flags & CLONE_NEWIPC)
+ return -EINVAL;
+ return 0;
+}
#endif
/**
}
#ifdef CONFIG_SUSPEND_SMP
+/* Needed to prevent the microcode driver from requesting firmware in its CPU
+ * hotplug notifier during the suspend/resume.
+ */
+int suspend_cpu_hotplug;
+EXPORT_SYMBOL(suspend_cpu_hotplug);
+
static cpumask_t frozen_cpus;
int disable_nonboot_cpus(void)
int cpu, first_cpu, error = 0;
mutex_lock(&cpu_add_remove_lock);
- first_cpu = first_cpu(cpu_present_map);
- if (!cpu_online(first_cpu)) {
- error = _cpu_up(first_cpu);
- if (error) {
- printk(KERN_ERR "Could not bring CPU%d up.\n",
- first_cpu);
- goto out;
- }
- }
-
+ suspend_cpu_hotplug = 1;
+ first_cpu = first_cpu(cpu_online_map);
/* We take down all of the non-boot CPUs in one shot to avoid races
* with the userspace trying to use the CPU hotplug at the same time
*/
} else {
printk(KERN_ERR "Non-boot CPUs are not disabled\n");
}
-out:
+ suspend_cpu_hotplug = 0;
mutex_unlock(&cpu_add_remove_lock);
return error;
}
/* Allow everyone to use the CPU hotplug again */
mutex_lock(&cpu_add_remove_lock);
cpu_hotplug_disabled = 0;
- mutex_unlock(&cpu_add_remove_lock);
if (cpus_empty(frozen_cpus))
- return;
+ goto out;
+ suspend_cpu_hotplug = 1;
printk("Enabling non-boot CPUs ...\n");
for_each_cpu_mask(cpu, frozen_cpus) {
- error = cpu_up(cpu);
+ error = _cpu_up(cpu);
if (!error) {
printk("CPU%d is up\n", cpu);
continue;
}
- printk(KERN_WARNING "Error taking CPU%d up: %d\n",
- cpu, error);
+ printk(KERN_WARNING "Error taking CPU%d up: %d\n", cpu, error);
}
cpus_clear(frozen_cpus);
+ suspend_cpu_hotplug = 0;
+out:
+ mutex_unlock(&cpu_add_remove_lock);
}
#endif
pgrp = task_pgrp(tsk);
if ((task_pgrp(t) != pgrp) &&
- (task_session(t) != task_session(tsk)) &&
+ (task_session(t) == task_session(tsk)) &&
will_become_orphaned_pgrp(pgrp, tsk) &&
has_stopped_jobs(pgrp)) {
__kill_pgrp_info(SIGHUP, SEND_SIG_PRIV, pgrp);
on_each_cpu(retrigger_next_event, NULL, 0, 1);
}
+/*
+ * During resume we might have to reprogram the high resolution timer
+ * interrupt (on the local CPU):
+ */
+void hres_timers_resume(void)
+{
+ WARN_ON_ONCE(num_online_cpus() > 1);
+
+ /* Retrigger the CPU local events: */
+ retrigger_next_event(NULL);
+}
+
/*
* Check, whether the timer is on the callback pending list
*/
timer_stats_hrtimer_set_start_info(timer);
- enqueue_hrtimer(timer, new_base, base == new_base);
+ /*
+ * Only allow reprogramming if the new base is on this CPU.
+ * (it might still be on another CPU if the timer was pending)
+ */
+ enqueue_hrtimer(timer, new_base,
+ new_base->cpu_base == &__get_cpu_var(hrtimer_bases));
unlock_hrtimer_base(timer, &flags);
rc = request_irq(irq, handler, irqflags, devname, dev_id);
if (rc) {
- kfree(dr);
+ devres_free(dr);
return rc;
}
int count = 10;
int unlock = 1;
+ if (unlikely(!debug_locks)) {
+ printk("INFO: lockdep is turned off.\n");
+ return;
+ }
printk("\nShowing all locks held in the system:\n");
/*
void debug_show_held_locks(struct task_struct *task)
{
+ if (unlikely(!debug_locks)) {
+ printk("INFO: lockdep is turned off.\n");
+ return;
+ }
lockdep_print_held_locks(task);
}
/* Lookup built-in module entry in /sys/modules */
mkobj = kset_find_obj(&module_subsys.kset, drv->mod_name);
- if (mkobj)
+ if (mkobj) {
mk = container_of(mkobj, struct module_kobject, kobj);
+ /* remember our module structure */
+ drv->mkobj = mk;
+ /* kset_find_obj took a reference */
+ kobject_put(mkobj);
+ }
}
if (!mk)
void module_remove_driver(struct device_driver *drv)
{
+ struct module_kobject *mk = NULL;
char *driver_name;
if (!drv)
return;
sysfs_remove_link(&drv->kobj, "module");
- if (drv->owner && drv->owner->mkobj.drivers_dir) {
+
+ if (drv->owner)
+ mk = &drv->owner->mkobj;
+ else if (drv->mkobj)
+ mk = drv->mkobj;
+ if (mk && mk->drivers_dir) {
driver_name = make_driver_name(drv);
if (driver_name) {
- sysfs_remove_link(drv->owner->mkobj.drivers_dir,
- driver_name);
+ sysfs_remove_link(mk->drivers_dir, driver_name);
kfree(driver_name);
}
}
{
struct kparam_string *kps = kp->arg;
+ if (!val) {
+ printk(KERN_ERR "%s: missing param set value\n", kp->name);
+ return -EINVAL;
+ }
if (strlen(val)+1 > kps->maxlen) {
printk(KERN_ERR "%s: string doesn't fit in %u chars.\n",
kp->name, kps->maxlen-1);
static void power_down(suspend_disk_method_t mode)
{
- disable_nonboot_cpus();
switch(mode) {
case PM_DISK_PLATFORM:
if (pm_ops && pm_ops->enter) {
goto Done;
}
- error = platform_prepare();
- if (error) {
- swsusp_free();
- goto Thaw;
- }
-
pr_debug("PM: Reading swsusp image.\n");
error = swsusp_read();
if (error) {
swsusp_free();
- platform_finish();
goto Thaw;
}
enable_nonboot_cpus();
Free:
swsusp_free();
- platform_finish();
device_resume();
resume_console();
Thaw:
size += highmem_size;
for_each_zone (zone)
if (populated_zone(zone)) {
+ tmp += snapshot_additional_pages(zone);
if (is_highmem(zone)) {
highmem_size -=
zone_page_state(zone, NR_FREE_PAGES);
} else {
tmp -= zone_page_state(zone, NR_FREE_PAGES);
tmp += zone->lowmem_reserve[ZONE_NORMAL];
- tmp += snapshot_additional_pages(zone);
}
}
if (error) {
printk(KERN_ERR "Failed to suspend some devices.\n");
} else {
- /* Enter S3, system is already frozen */
- suspend_enter(PM_SUSPEND_MEM);
-
+ error = disable_nonboot_cpus();
+ if (!error) {
+ /* Enter S3, system is already frozen */
+ suspend_enter(PM_SUSPEND_MEM);
+ enable_nonboot_cpus();
+ }
/* Wake up devices */
device_resume();
}
case PMOPS_ENTER:
if (data->platform_suspend) {
- disable_nonboot_cpus();
kernel_shutdown_prepare(SYSTEM_SUSPEND_DISK);
error = pm_ops->enter(PM_SUSPEND_DISK);
- enable_nonboot_cpus();
+ error = 0;
}
break;
return retval;
}
-static inline struct task_struct *eldest_child(struct task_struct *p)
-{
- if (list_empty(&p->children))
- return NULL;
- return list_entry(p->children.next,struct task_struct,sibling);
-}
-
-static inline struct task_struct *older_sibling(struct task_struct *p)
-{
- if (p->sibling.prev==&p->parent->children)
- return NULL;
- return list_entry(p->sibling.prev,struct task_struct,sibling);
-}
-
-static inline struct task_struct *younger_sibling(struct task_struct *p)
-{
- if (p->sibling.next==&p->parent->children)
- return NULL;
- return list_entry(p->sibling.next,struct task_struct,sibling);
-}
-
static const char stat_nam[] = "RSDTtZX";
static void show_task(struct task_struct *p)
{
- struct task_struct *relative;
unsigned long free = 0;
unsigned state;
free = (unsigned long)n - (unsigned long)end_of_stack(p);
}
#endif
- printk("%5lu %5d %6d ", free, p->pid, p->parent->pid);
- if ((relative = eldest_child(p)))
- printk("%5d ", relative->pid);
- else
- printk(" ");
- if ((relative = younger_sibling(p)))
- printk("%7d", relative->pid);
- else
- printk(" ");
- if ((relative = older_sibling(p)))
- printk(" %5d", relative->pid);
- else
- printk(" ");
+ printk("%5lu %5d %6d", free, p->pid, p->parent->pid);
if (!p->mm)
printk(" (L-TLB)\n");
else
{
int op;
- if (!capable(CAP_SYS_ADMIN))
+ if (write && !capable(CAP_SYS_ADMIN))
return -EPERM;
op = OP_OR;
(((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
(USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
}
+EXPORT_SYMBOL(timeval_to_jiffies);
void jiffies_to_timeval(const unsigned long jiffies, struct timeval *value)
{
tv_usec /= NSEC_PER_USEC;
value->tv_usec = tv_usec;
}
+EXPORT_SYMBOL(jiffies_to_timeval);
/*
* Convert jiffies/jiffies_64 to clock_t and back.
}
EXPORT_SYMBOL_GPL(clockevents_notify);
-#ifdef CONFIG_SYSFS
-
-/**
- * clockevents_show_registered - sysfs interface for listing clockevents
- * @dev: unused
- * @buf: char buffer to be filled with clock events list
- *
- * Provides sysfs interface for listing registered clock event devices
- */
-static ssize_t clockevents_show_registered(struct sys_device *dev, char *buf)
-{
- struct list_head *tmp;
- char *p = buf;
- int cpu;
-
- spin_lock(&clockevents_lock);
-
- list_for_each(tmp, &clockevent_devices) {
- struct clock_event_device *ce;
-
- ce = list_entry(tmp, struct clock_event_device, list);
- p += sprintf(p, "%-20s F:%04x M:%d", ce->name,
- ce->features, ce->mode);
- p += sprintf(p, " C:");
- if (!cpus_equal(ce->cpumask, cpu_possible_map)) {
- for_each_cpu_mask(cpu, ce->cpumask)
- p += sprintf(p, " %d", cpu);
- } else {
- /*
- * FIXME: Add the cpu which is handling this sucker
- */
- }
- p += sprintf(p, "\n");
- }
-
- spin_unlock(&clockevents_lock);
-
- return p - buf;
-}
-
-/*
- * Sysfs setup bits:
- */
-static SYSDEV_ATTR(registered, 0600,
- clockevents_show_registered, NULL);
-
-static struct sysdev_class clockevents_sysclass = {
- set_kset_name("clockevents"),
-};
-
-static struct sys_device clockevents_sys_device = {
- .id = 0,
- .cls = &clockevents_sysclass,
-};
-
-static int __init clockevents_sysfs_init(void)
-{
- int error = sysdev_class_register(&clockevents_sysclass);
-
- if (!error)
- error = sysdev_register(&clockevents_sys_device);
- if (!error)
- error = sysdev_create_file(
- &clockevents_sys_device,
- &attr_registered);
- return error;
-}
-device_initcall(clockevents_sysfs_init);
-#endif
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
add_timer(&watchdog_timer);
}
- } else if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS) {
+ } else {
+ if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
if (!watchdog || cs->rating > watchdog->rating) {
return clocksource_register(&clocksource_jiffies);
}
-module_init(init_jiffies_clocksource);
+core_initcall(init_jiffies_clocksource);
/* TIME_ERROR prevents overwriting the CMOS clock */
static int time_state = TIME_OK; /* clock synchronization status */
int time_status = STA_UNSYNC; /* clock status bits */
-static long time_offset; /* time adjustment (ns) */
+static s64 time_offset; /* time adjustment (ns) */
static long time_constant = 2; /* pll time constant */
long time_maxerror = NTP_PHASE_LIMIT; /* maximum error (us) */
long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */
*/
int do_adjtimex(struct timex *txc)
{
- long ltemp, mtemp, save_adjust;
+ long mtemp, save_adjust, rem;
s64 freq_adj, temp64;
int result;
time_adjust = txc->offset;
}
else if (time_status & STA_PLL) {
- ltemp = txc->offset * NSEC_PER_USEC;
+ time_offset = txc->offset * NSEC_PER_USEC;
/*
* Scale the phase adjustment and
* clamp to the operating range.
*/
- time_offset = min(ltemp, MAXPHASE * NSEC_PER_USEC);
- time_offset = max(time_offset, -MAXPHASE * NSEC_PER_USEC);
+ time_offset = min(time_offset, (s64)MAXPHASE * NSEC_PER_USEC);
+ time_offset = max(time_offset, (s64)-MAXPHASE * NSEC_PER_USEC);
/*
* Select whether the frequency is to be controlled
mtemp = xtime.tv_sec - time_reftime;
time_reftime = xtime.tv_sec;
- freq_adj = (s64)time_offset * mtemp;
+ freq_adj = time_offset * mtemp;
freq_adj = shift_right(freq_adj, time_constant * 2 +
(SHIFT_PLL + 2) * 2 - SHIFT_NSEC);
if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
- temp64 = (s64)time_offset << (SHIFT_NSEC - SHIFT_FLL);
+ temp64 = time_offset << (SHIFT_NSEC - SHIFT_FLL);
if (time_offset < 0) {
temp64 = -temp64;
do_div(temp64, mtemp);
freq_adj += time_freq;
freq_adj = min(freq_adj, (s64)MAXFREQ_NSEC);
time_freq = max(freq_adj, (s64)-MAXFREQ_NSEC);
- time_offset = (time_offset / NTP_INTERVAL_FREQ)
- << SHIFT_UPDATE;
+ time_offset = div_long_long_rem_signed(time_offset,
+ NTP_INTERVAL_FREQ,
+ &rem);
+ time_offset <<= SHIFT_UPDATE;
} /* STA_PLL */
} /* txc->modes & ADJ_OFFSET */
if (txc->modes & ADJ_TICK)
result = TIME_ERROR;
if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
- txc->offset = save_adjust;
+ txc->offset = save_adjust;
else
- txc->offset = shift_right(time_offset, SHIFT_UPDATE)
- * NTP_INTERVAL_FREQ / 1000;
- txc->freq = (time_freq / NSEC_PER_USEC)
- << (SHIFT_USEC - SHIFT_NSEC);
+ txc->offset = ((long)shift_right(time_offset, SHIFT_UPDATE)) *
+ NTP_INTERVAL_FREQ / 1000;
+ txc->freq = (time_freq / NSEC_PER_USEC) <<
+ (SHIFT_USEC - SHIFT_NSEC);
txc->maxerror = time_maxerror;
txc->esterror = time_esterror;
txc->status = time_status;
return;
}
SEQ_printf(m, "%s\n", dev->name);
- SEQ_printf(m, " max_delta_ns: %ld\n", dev->max_delta_ns);
- SEQ_printf(m, " min_delta_ns: %ld\n", dev->min_delta_ns);
- SEQ_printf(m, " mult: %ld\n", dev->mult);
+ SEQ_printf(m, " max_delta_ns: %lu\n", dev->max_delta_ns);
+ SEQ_printf(m, " min_delta_ns: %lu\n", dev->min_delta_ns);
+ SEQ_printf(m, " mult: %lu\n", dev->mult);
SEQ_printf(m, " shift: %d\n", dev->shift);
SEQ_printf(m, " mode: %d\n", dev->mode);
SEQ_printf(m, " next_event: %Ld nsecs\n",
{
ktime_t hr_delta = hrtimer_get_next_event();
struct timespec tsdelta;
+ unsigned long delta;
if (hr_delta.tv64 == KTIME_MAX)
return expires;
- if (hr_delta.tv64 <= TICK_NSEC)
- return now;
+ /*
+ * Expired timer available, let it expire in the next tick
+ */
+ if (hr_delta.tv64 <= 0)
+ return now + 1;
tsdelta = ktime_to_timespec(hr_delta);
- now += timespec_to_jiffies(&tsdelta);
+ delta = timespec_to_jiffies(&tsdelta);
+ /*
+ * Take rounding errors in to account and make sure, that it
+ * expires in the next tick. Otherwise we go into an endless
+ * ping pong due to tick_nohz_stop_sched_tick() retriggering
+ * the timer softirq
+ */
+ if (delta < 1)
+ delta = 1;
+ now += delta;
if (time_before(now, expires))
return now;
return expires;
clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL);
/* Resume hrtimers */
- clock_was_set();
+ hres_timers_resume();
return 0;
}
/*
* is destination page below bounce pfn?
*/
- if (page_to_pfn(page) < q->bounce_pfn)
+ if (page_to_pfn(page) <= q->bounce_pfn)
continue;
/*
#include <asm/tlbflush.h>
#include "filemap.h"
+/*
+ * We do use our own empty page to avoid interference with other users
+ * of ZERO_PAGE(), such as /dev/zero
+ */
+static struct page *__xip_sparse_page;
+
+static struct page *xip_sparse_page(void)
+{
+ if (!__xip_sparse_page) {
+ unsigned long zeroes = get_zeroed_page(GFP_HIGHUSER);
+ if (zeroes) {
+ static DEFINE_SPINLOCK(xip_alloc_lock);
+ spin_lock(&xip_alloc_lock);
+ if (!__xip_sparse_page)
+ __xip_sparse_page = virt_to_page(zeroes);
+ else
+ free_page(zeroes);
+ spin_unlock(&xip_alloc_lock);
+ }
+ }
+ return __xip_sparse_page;
+}
+
/*
* This is a file read routine for execute in place files, and uses
* the mapping->a_ops->get_xip_page() function for the actual low-level
* xip_write
*
* This function walks all vmas of the address_space and unmaps the
- * ZERO_PAGE when found at pgoff. Should it go in rmap.c?
+ * __xip_sparse_page when found at pgoff.
*/
static void
__xip_unmap (struct address_space * mapping,
spinlock_t *ptl;
struct page *page;
+ page = __xip_sparse_page;
+ if (!page)
+ return;
+
spin_lock(&mapping->i_mmap_lock);
vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
mm = vma->vm_mm;
address = vma->vm_start +
((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
BUG_ON(address < vma->vm_start || address >= vma->vm_end);
- page = ZERO_PAGE(0);
pte = page_check_address(page, mm, address, &ptl);
if (pte) {
/* Nuke the page table entry. */
+ area->vm_pgoff;
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- if (pgoff >= size) {
- return NULL;
- }
+ if (pgoff >= size)
+ return NOPAGE_SIGBUS;
page = mapping->a_ops->get_xip_page(mapping, pgoff*(PAGE_SIZE/512), 0);
- if (!IS_ERR(page)) {
+ if (!IS_ERR(page))
goto out;
- }
if (PTR_ERR(page) != -ENODATA)
- return NULL;
+ return NOPAGE_SIGBUS;
/* sparse block */
if ((area->vm_flags & (VM_WRITE | VM_MAYWRITE)) &&
page = mapping->a_ops->get_xip_page (mapping,
pgoff*(PAGE_SIZE/512), 1);
if (IS_ERR(page))
- return NULL;
+ return NOPAGE_SIGBUS;
/* unmap page at pgoff from all other vmas */
__xip_unmap(mapping, pgoff);
} else {
- /* not shared and writable, use ZERO_PAGE() */
- page = ZERO_PAGE(0);
+ /* not shared and writable, use xip_sparse_page() */
+ page = xip_sparse_page();
+ if (!page)
+ return NOPAGE_OOM;
}
out:
unsigned long start, unsigned long end)
{
struct address_space *mapping;
- loff_t offset, endoff;
+ loff_t offset, endoff;
+ int error;
- *prev = vma;
+ *prev = NULL; /* tell sys_madvise we drop mmap_sem */
if (vma->vm_flags & (VM_LOCKED|VM_NONLINEAR|VM_HUGETLB))
return -EINVAL;
+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
endoff = (loff_t)(end - vma->vm_start - 1)
+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
- return vmtruncate_range(mapping->host, offset, endoff);
+
+ /* vmtruncate_range needs to take i_mutex and i_alloc_sem */
+ up_write(¤t->mm->mmap_sem);
+ error = vmtruncate_range(mapping->host, offset, endoff);
+ down_write(¤t->mm->mmap_sem);
+ return error;
}
static long
if (error)
goto out;
start = tmp;
- if (start < prev->vm_end)
+ if (prev && start < prev->vm_end)
start = prev->vm_end;
error = unmapped_error;
if (start >= end)
goto out;
- vma = prev->vm_next;
+ if (prev)
+ vma = prev->vm_next;
+ else /* madvise_remove dropped mmap_sem */
+ vma = find_vma(current->mm, start);
}
out:
up_write(¤t->mm->mmap_sem);
void **pslot;
if (!mapping) {
- /* Anonymous page */
+ /* Anonymous page without mapping */
if (page_count(page) != 1)
return -EAGAIN;
return 0;
*/
__put_page(page);
+ /*
+ * If moved to a different zone then also account
+ * the page for that zone. Other VM counters will be
+ * taken care of when we establish references to the
+ * new page and drop references to the old page.
+ *
+ * Note that anonymous pages are accounted for
+ * via NR_FILE_PAGES and NR_ANON_PAGES if they
+ * are mapped to swap space.
+ */
+ __dec_zone_page_state(page, NR_FILE_PAGES);
+ __inc_zone_page_state(newpage, NR_FILE_PAGES);
+
write_unlock_irq(&mapping->tree_lock);
return 0;
EXPORT_SYMBOL(mem_map);
EXPORT_SYMBOL(__vm_enough_memory);
+EXPORT_SYMBOL(num_physpages);
/* list of shareable VMAs */
struct rb_root nommu_vma_tree = RB_ROOT;
unsigned long pglen = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned long vmpglen;
+ /* suppress VMA sharing for shared regions */
+ if (vm_flags & VM_SHARED &&
+ capabilities & BDI_CAP_MAP_DIRECT)
+ goto dont_share_VMAs;
+
for (rb = rb_first(&nommu_vma_tree); rb; rb = rb_next(rb)) {
vma = rb_entry(rb, struct vm_area_struct, vm_rb);
goto shared;
}
+ dont_share_VMAs:
vma = NULL;
/* obtain the address at which to make a shared mapping
}
EXPORT_SYMBOL(unmap_mapping_range);
+/*
+ * ask for an unmapped area at which to create a mapping on a file
+ */
+unsigned long get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
+{
+ unsigned long (*get_area)(struct file *, unsigned long, unsigned long,
+ unsigned long, unsigned long);
+
+ get_area = current->mm->get_unmapped_area;
+ if (file && file->f_op && file->f_op->get_unmapped_area)
+ get_area = file->f_op->get_unmapped_area;
+
+ if (!get_area)
+ return -ENOSYS;
+
+ return get_area(file, addr, len, pgoff, flags);
+}
+
+EXPORT_SYMBOL(get_unmapped_area);
+
/*
* Check that a process has enough memory to allocate a new virtual
* mapping. 0 means there is enough memory for the allocation to
struct zone **z;
nodemask_t nodes;
int node;
+
+ nodes_clear(nodes);
/* node has memory ? */
for_each_online_node(node)
if (NODE_DATA(node)->node_present_pages)
*/
do_each_thread(g, q) {
if (q->mm == mm && q->tgid != p->tgid)
- force_sig(SIGKILL, p);
+ force_sig(SIGKILL, q);
} while_each_thread(g, q);
return 0;
struct address_space *mapping = page_mapping(page);
if (mapping)
ret = page_mkclean_file(mapping, page);
+ if (page_test_and_clear_dirty(page))
+ ret = 1;
}
- if (page_test_and_clear_dirty(page))
- ret = 1;
return ret;
}
/*
* shmem_free_swp - free some swap entries in a directory
*
- * @dir: pointer to the directory
- * @edir: pointer after last entry of the directory
+ * @dir: pointer to the directory
+ * @edir: pointer after last entry of the directory
+ * @punch_lock: pointer to spinlock when needed for the holepunch case
*/
-static int shmem_free_swp(swp_entry_t *dir, swp_entry_t *edir)
+static int shmem_free_swp(swp_entry_t *dir, swp_entry_t *edir,
+ spinlock_t *punch_lock)
{
+ spinlock_t *punch_unlock = NULL;
swp_entry_t *ptr;
int freed = 0;
for (ptr = dir; ptr < edir; ptr++) {
if (ptr->val) {
+ if (unlikely(punch_lock)) {
+ punch_unlock = punch_lock;
+ punch_lock = NULL;
+ spin_lock(punch_unlock);
+ if (!ptr->val)
+ continue;
+ }
free_swap_and_cache(*ptr);
*ptr = (swp_entry_t){0};
freed++;
}
}
+ if (punch_unlock)
+ spin_unlock(punch_unlock);
return freed;
}
-static int shmem_map_and_free_swp(struct page *subdir,
- int offset, int limit, struct page ***dir)
+static int shmem_map_and_free_swp(struct page *subdir, int offset,
+ int limit, struct page ***dir, spinlock_t *punch_lock)
{
swp_entry_t *ptr;
int freed = 0;
int size = limit - offset;
if (size > LATENCY_LIMIT)
size = LATENCY_LIMIT;
- freed += shmem_free_swp(ptr+offset, ptr+offset+size);
+ freed += shmem_free_swp(ptr+offset, ptr+offset+size,
+ punch_lock);
if (need_resched()) {
shmem_swp_unmap(ptr);
if (*dir) {
long nr_swaps_freed = 0;
int offset;
int freed;
- int punch_hole = 0;
+ int punch_hole;
+ spinlock_t *needs_lock;
+ spinlock_t *punch_lock;
+ unsigned long upper_limit;
inode->i_ctime = inode->i_mtime = CURRENT_TIME;
idx = (start + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
info->flags |= SHMEM_TRUNCATE;
if (likely(end == (loff_t) -1)) {
limit = info->next_index;
+ upper_limit = SHMEM_MAX_INDEX;
info->next_index = idx;
+ needs_lock = NULL;
+ punch_hole = 0;
} else {
- limit = (end + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- if (limit > info->next_index)
- limit = info->next_index;
+ if (end + 1 >= inode->i_size) { /* we may free a little more */
+ limit = (inode->i_size + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT;
+ upper_limit = SHMEM_MAX_INDEX;
+ } else {
+ limit = (end + 1) >> PAGE_CACHE_SHIFT;
+ upper_limit = limit;
+ }
+ needs_lock = &info->lock;
punch_hole = 1;
}
size = limit;
if (size > SHMEM_NR_DIRECT)
size = SHMEM_NR_DIRECT;
- nr_swaps_freed = shmem_free_swp(ptr+idx, ptr+size);
+ nr_swaps_freed = shmem_free_swp(ptr+idx, ptr+size, needs_lock);
}
/*
* If there are no indirect blocks or we are punching a hole
* below indirect blocks, nothing to be done.
*/
- if (!topdir || (punch_hole && (limit <= SHMEM_NR_DIRECT)))
+ if (!topdir || limit <= SHMEM_NR_DIRECT)
goto done2;
- BUG_ON(limit <= SHMEM_NR_DIRECT);
+ /*
+ * The truncation case has already dropped info->lock, and we're safe
+ * because i_size and next_index have already been lowered, preventing
+ * access beyond. But in the punch_hole case, we still need to take
+ * the lock when updating the swap directory, because there might be
+ * racing accesses by shmem_getpage(SGP_CACHE), shmem_unuse_inode or
+ * shmem_writepage. However, whenever we find we can remove a whole
+ * directory page (not at the misaligned start or end of the range),
+ * we first NULLify its pointer in the level above, and then have no
+ * need to take the lock when updating its contents: needs_lock and
+ * punch_lock (either pointing to info->lock or NULL) manage this.
+ */
+
+ upper_limit -= SHMEM_NR_DIRECT;
limit -= SHMEM_NR_DIRECT;
idx = (idx > SHMEM_NR_DIRECT)? (idx - SHMEM_NR_DIRECT): 0;
offset = idx % ENTRIES_PER_PAGE;
if (*dir) {
diroff = ((idx - ENTRIES_PER_PAGEPAGE/2) %
ENTRIES_PER_PAGEPAGE) / ENTRIES_PER_PAGE;
- if (!diroff && !offset) {
- *dir = NULL;
+ if (!diroff && !offset && upper_limit >= stage) {
+ if (needs_lock) {
+ spin_lock(needs_lock);
+ *dir = NULL;
+ spin_unlock(needs_lock);
+ needs_lock = NULL;
+ } else
+ *dir = NULL;
nr_pages_to_free++;
list_add(&middir->lru, &pages_to_free);
}
}
stage = idx + ENTRIES_PER_PAGEPAGE;
middir = *dir;
- *dir = NULL;
- nr_pages_to_free++;
- list_add(&middir->lru, &pages_to_free);
+ if (punch_hole)
+ needs_lock = &info->lock;
+ if (upper_limit >= stage) {
+ if (needs_lock) {
+ spin_lock(needs_lock);
+ *dir = NULL;
+ spin_unlock(needs_lock);
+ needs_lock = NULL;
+ } else
+ *dir = NULL;
+ nr_pages_to_free++;
+ list_add(&middir->lru, &pages_to_free);
+ }
shmem_dir_unmap(dir);
cond_resched();
dir = shmem_dir_map(middir);
diroff = 0;
}
+ punch_lock = needs_lock;
subdir = dir[diroff];
- if (subdir && page_private(subdir)) {
+ if (subdir && !offset && upper_limit-idx >= ENTRIES_PER_PAGE) {
+ if (needs_lock) {
+ spin_lock(needs_lock);
+ dir[diroff] = NULL;
+ spin_unlock(needs_lock);
+ punch_lock = NULL;
+ } else
+ dir[diroff] = NULL;
+ nr_pages_to_free++;
+ list_add(&subdir->lru, &pages_to_free);
+ }
+ if (subdir && page_private(subdir) /* has swap entries */) {
size = limit - idx;
if (size > ENTRIES_PER_PAGE)
size = ENTRIES_PER_PAGE;
freed = shmem_map_and_free_swp(subdir,
- offset, size, &dir);
+ offset, size, &dir, punch_lock);
if (!dir)
dir = shmem_dir_map(middir);
nr_swaps_freed += freed;
- if (offset)
+ if (offset || punch_lock) {
spin_lock(&info->lock);
- set_page_private(subdir, page_private(subdir) - freed);
- if (offset)
+ set_page_private(subdir,
+ page_private(subdir) - freed);
spin_unlock(&info->lock);
- if (!punch_hole)
- BUG_ON(page_private(subdir) > offset);
- }
- if (offset)
- offset = 0;
- else if (subdir && !page_private(subdir)) {
- dir[diroff] = NULL;
- nr_pages_to_free++;
- list_add(&subdir->lru, &pages_to_free);
+ } else
+ BUG_ON(page_private(subdir) != freed);
}
+ offset = 0;
}
done1:
shmem_dir_unmap(dir);
* generic_delete_inode did it, before we lowered next_index.
* Also, though shmem_getpage checks i_size before adding to
* cache, no recheck after: so fix the narrow window there too.
+ *
+ * Recalling truncate_inode_pages_range and unmap_mapping_range
+ * every time for punch_hole (which never got a chance to clear
+ * SHMEM_PAGEIN at the start of vmtruncate_range) is expensive,
+ * yet hardly ever necessary: try to optimize them out later.
*/
truncate_inode_pages_range(inode->i_mapping, start, end);
+ if (punch_hole)
+ unmap_mapping_range(inode->i_mapping, start,
+ end - start, 1);
}
spin_lock(&info->lock);
/* Print header */
if (lines == 0) {
printk(KERN_ERR
- "Slab corruption: start=%p, len=%d\n",
- realobj, size);
+ "Slab corruption: %s start=%p, len=%d\n",
+ cachep->name, realobj, size);
print_objinfo(cachep, objp, 0);
}
/* Hexdump the affected line */
} else {
vhdr->h_vlan_encapsulated_proto = htons(len);
}
+
+ skb->protocol = htons(ETH_P_8021Q);
+ skb->nh.raw = skb->data;
}
/* Before delegating work to the lower layer, enter our MAC-address */
/*
* Size check to see if ddp->deh_len was crap
* (Otherwise we'll detonate most spectacularly
- * in the middle of recvmsg()).
+ * in the middle of atalk_checksum() or recvmsg()).
*/
- if (skb->len < sizeof(*ddp))
+ if (skb->len < sizeof(*ddp) || skb->len < (len_hops & 1023)) {
+ pr_debug("AppleTalk: dropping corrupted frame (deh_len=%u, "
+ "skb->len=%u)\n", len_hops & 1023, skb->len);
goto freeit;
+ }
/*
* Any checksums. Note we don't do htons() on this == is assumed to be
spin_unlock_irqrestore(&PRIV(dev)->xoff_lock, flags);
}
-static void clip_neigh_destroy(struct neighbour *neigh)
-{
- DPRINTK("clip_neigh_destroy (neigh %p)\n", neigh);
- if (NEIGH2ENTRY(neigh)->vccs)
- printk(KERN_CRIT "clip_neigh_destroy: vccs != NULL !!!\n");
- NEIGH2ENTRY(neigh)->vccs = (void *) NEIGHBOR_DEAD;
-}
-
static void clip_neigh_solicit(struct neighbour *neigh, struct sk_buff *skb)
{
DPRINTK("clip_neigh_solicit (neigh %p, skb %p)\n", neigh, skb);
/* parameters are copied from ARP ... */
.parms = {
.tbl = &clip_tbl,
- .neigh_destructor = clip_neigh_destroy,
.base_reachable_time = 30 * HZ,
.retrans_time = 1 * HZ,
.gc_staletime = 60 * HZ,
#
# Amateur Radio protocols and AX.25 device configuration
#
-# 19971130 Now in an own category to make correct compilation of the
-# AX.25 stuff easier...
-# Joerg Reuter DL1BKE <jreuter@yaina.de>
-# 19980129 Moved to net/ax25/Config.in, sourcing device drivers.
menuconfig HAMRADIO
depends on NET
bool "Amateur Radio support"
help
If you want to connect your Linux box to an amateur radio, answer Y
- here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
- the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+ here. You want to read <http://www.tapr.org/tapr/html/pkthome.html>
+ and more specifically about AX.25 on Linux
+ <http://www.linux-ax25.org/>.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about amateur radio.
comment "Packet Radio protocols"
- depends on HAMRADIO && NET
+ depends on HAMRADIO
config AX25
tristate "Amateur Radio AX.25 Level 2 protocol"
- depends on HAMRADIO && NET
- ---help---
+ depends on HAMRADIO
+ help
This is the protocol used for computer communication over amateur
radio. It is either used by itself for point-to-point links, or to
carry other protocols such as tcp/ip. To use it, you need a device
config AX25_DAMA_SLAVE
bool "AX.25 DAMA Slave support"
+ default y
depends on AX25
help
DAMA is a mechanism to prevent collisions when doing AX.25
from clients (called "slaves") and redistributes it to other slaves.
If you say Y here, your Linux box will act as a DAMA slave; this is
transparent in that you don't have to do any special DAMA
- configuration. (Linux cannot yet act as a DAMA server.) If unsure,
- say N.
+ configuration. Linux cannot yet act as a DAMA server. This option
+ only compiles DAMA slave support into the kernel. It still needs to
+ be enabled at runtime. For more about DAMA see
+ <http://www.linux-ax25.org>. If unsure, say Y.
+
+# placeholder until implemented
+config AX25_DAMA_MASTER
+ bool 'AX.25 DAMA Master support'
+ depends on AX25_DAMA_SLAVE && BROKEN
+ help
+ DAMA is a mechanism to prevent collisions when doing AX.25
+ networking. A DAMA server (called "master") accepts incoming traffic
+ from clients (called "slaves") and redistributes it to other slaves.
+ If you say Y here, your Linux box will act as a DAMA master; this is
+ transparent in that you don't have to do any special DAMA
+ configuration. Linux cannot yet act as a DAMA server. This option
+ only compiles DAMA slave support into the kernel. It still needs to
+ be explicitly enabled, so if unsure, say Y.
-# bool ' AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER
config NETROM
tristate "Amateur Radio NET/ROM protocol"
depends on AX25
- ---help---
+ help
NET/ROM is a network layer protocol on top of AX.25 useful for
routing.
A comprehensive listing of all the software for Linux amateur radio
users as well as information about how to configure an AX.25 port is
- contained in the AX25-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. You also might want to
- check out the file <file:Documentation/networking/ax25.txt>. More
- information about digital amateur radio in general is on the WWW at
+ contained in the Linux Ham Wiki, available from
+ <http://www.linux-ax25.org>. You also might want to check out the
+ file <file:Documentation/networking/ax25.txt>. More information about
+ digital amateur radio in general is on the WWW at
<http://www.tapr.org/tapr/html/pkthome.html>.
To compile this driver as a module, choose M here: the
config ROSE
tristate "Amateur Radio X.25 PLP (Rose)"
depends on AX25
- ---help---
+ help
The Packet Layer Protocol (PLP) is a way to route packets over X.25
connections in general and amateur radio AX.25 connections in
particular, essentially an alternative to NET/ROM.
A comprehensive listing of all the software for Linux amateur radio
users as well as information about how to configure an AX.25 port is
- contained in the AX25-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. You also might want to
- check out the file <file:Documentation/networking/ax25.txt>. More
- information about digital amateur radio in general is on the WWW at
+ contained in the Linux Ham Wiki, available from
+ <http://www.linux-ax25.org>. You also might want to check out the
+ file <file:Documentation/networking/ax25.txt>. More information about
+ digital amateur radio in general is on the WWW at
<http://www.tapr.org/tapr/html/pkthome.html>.
To compile this driver as a module, choose M here: the
module will be called rose.
-
menu "AX.25 network device drivers"
- depends on HAMRADIO && NET && AX25!=n
+ depends on HAMRADIO && AX25
source "drivers/net/hamradio/Kconfig"
endmenu
-
return 0;
}
-static int inline hidp_send_ctrl_message(struct hidp_session *session,
+static inline int hidp_send_ctrl_message(struct hidp_session *session,
unsigned char hdr, unsigned char *data, int size)
{
int err;
{
}
+static const struct {
+ __u16 idVendor;
+ __u16 idProduct;
+ unsigned quirks;
+} hidp_blacklist[] = {
+ /* Apple wireless Mighty Mouse */
+ { 0x05ac, 0x030c, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
+
+ { } /* Terminating entry */
+};
+
+static void hidp_setup_quirks(struct hid_device *hid)
+{
+ unsigned int n;
+
+ for (n = 0; hidp_blacklist[n].idVendor; n++)
+ if (hidp_blacklist[n].idVendor == le16_to_cpu(hid->vendor) &&
+ hidp_blacklist[n].idProduct == le16_to_cpu(hid->product))
+ hid->quirks = hidp_blacklist[n].quirks;
+}
+
static inline void hidp_setup_hid(struct hidp_session *session, struct hidp_connadd_req *req)
{
struct hid_device *hid = session->hid;
hid->hidinput_input_event = hidp_hidinput_event;
+ hidp_setup_quirks(hid);
+
list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT].report_list, list)
hidp_send_report(session, report);
rcu_read_lock();
fdb = __br_fdb_get(br, addr);
- if (fdb)
- atomic_inc(&fdb->use_count);
+ if (fdb && !atomic_inc_not_zero(&fdb->use_count))
+ fdb = NULL;
rcu_read_unlock();
return fdb;
}
#define brnf_filter_vlan_tagged 1
#endif
-static __be16 inline vlan_proto(const struct sk_buff *skb)
+static inline __be16 vlan_proto(const struct sk_buff *skb)
{
return vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
}
/* called under bridge lock */
void br_stp_change_bridge_id(struct net_bridge *br, const unsigned char *addr)
{
- unsigned char oldaddr[6];
+ /* should be aligned on 2 bytes for compare_ether_addr() */
+ unsigned short oldaddr_aligned[ETH_ALEN >> 1];
+ unsigned char *oldaddr = (unsigned char *)oldaddr_aligned;
struct net_bridge_port *p;
int wasroot;
br_become_root_bridge(br);
}
-static const unsigned char br_mac_zero[6];
+/* should be aligned on 2 bytes for compare_ether_addr() */
+static const unsigned short br_mac_zero_aligned[ETH_ALEN >> 1];
/* called under bridge lock */
void br_stp_recalculate_bridge_id(struct net_bridge *br)
{
+ const unsigned char *br_mac_zero =
+ (const unsigned char *)br_mac_zero_aligned;
const unsigned char *addr = br_mac_zero;
struct net_bridge_port *p;
else
strlcpy(dev->name, newname, IFNAMSIZ);
- err = device_rename(&dev->dev, dev->name);
- if (!err) {
- hlist_del(&dev->name_hlist);
- hlist_add_head(&dev->name_hlist, dev_name_hash(dev->name));
- raw_notifier_call_chain(&netdev_chain,
- NETDEV_CHANGENAME, dev);
- }
+ device_rename(&dev->dev, dev->name);
+ hlist_del(&dev->name_hlist);
+ hlist_add_head(&dev->name_hlist, dev_name_hash(dev->name));
+ raw_notifier_call_chain(&netdev_chain, NETDEV_CHANGENAME, dev);
return err;
}
if (dev->qdisc_ingress) {
__u32 ttl = (__u32) G_TC_RTTL(skb->tc_verd);
if (MAX_RED_LOOP < ttl++) {
- printk(KERN_WARNING "Redir loop detected Dropping packet (%s->%s)\n",
- skb->input_dev->name, skb->dev->name);
+ printk(KERN_WARNING "Redir loop detected Dropping packet (%d->%d)\n",
+ skb->iif, skb->dev->ifindex);
return TC_ACT_SHOT;
}
skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_INGRESS);
- spin_lock(&dev->ingress_lock);
+ spin_lock(&dev->queue_lock);
if ((q = dev->qdisc_ingress) != NULL)
result = q->enqueue(skb, q);
- spin_unlock(&dev->ingress_lock);
+ spin_unlock(&dev->queue_lock);
}
if (!skb->tstamp.off_sec)
net_timestamp(skb);
- if (!skb->input_dev)
- skb->input_dev = skb->dev;
+ if (!skb->iif)
+ skb->iif = skb->dev->ifindex;
orig_dev = skb_bond(skb);
}
}
- err = -ENETUNREACH;
+ err = -ESRCH;
out:
rcu_read_unlock();
EXPORT_SYMBOL_GPL(fib_rules_lookup);
+static int validate_rulemsg(struct fib_rule_hdr *frh, struct nlattr **tb,
+ struct fib_rules_ops *ops)
+{
+ int err = -EINVAL;
+
+ if (frh->src_len)
+ if (tb[FRA_SRC] == NULL ||
+ frh->src_len > (ops->addr_size * 8) ||
+ nla_len(tb[FRA_SRC]) != ops->addr_size)
+ goto errout;
+
+ if (frh->dst_len)
+ if (tb[FRA_DST] == NULL ||
+ frh->dst_len > (ops->addr_size * 8) ||
+ nla_len(tb[FRA_DST]) != ops->addr_size)
+ goto errout;
+
+ err = 0;
+errout:
+ return err;
+}
+
int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
{
struct fib_rule_hdr *frh = nlmsg_data(nlh);
if (err < 0)
goto errout;
+ err = validate_rulemsg(frh, tb, ops);
+ if (err < 0)
+ goto errout;
+
rule = kzalloc(ops->rule_size, GFP_KERNEL);
if (rule == NULL) {
err = -ENOMEM;
if (err < 0)
goto errout;
+ err = validate_rulemsg(frh, tb, ops);
+ if (err < 0)
+ goto errout;
+
list_for_each_entry(rule, ops->rules_list, list) {
if (frh->action && (frh->action != rule->action))
continue;
return -EAFNOSUPPORT;
rcu_read_lock();
- list_for_each_entry(rule, ops->rules_list, list) {
+ list_for_each_entry_rcu(rule, ops->rules_list, list) {
if (idx < cb->args[0])
goto skip;
n->dead = 1;
shrunk = 1;
write_unlock(&n->lock);
+ if (n->parms->neigh_cleanup)
+ n->parms->neigh_cleanup(n);
neigh_release(n);
continue;
}
NEIGH_PRINTK2("neigh %p is stray.\n", n);
}
write_unlock(&n->lock);
+ if (n->parms->neigh_cleanup)
+ n->parms->neigh_cleanup(n);
neigh_release(n);
}
}
kfree(hh);
}
- if (neigh->parms->neigh_destructor)
- (neigh->parms->neigh_destructor)(neigh);
-
skb_queue_purge(&neigh->arp_queue);
dev_put(neigh->dev);
*np = n->next;
n->dead = 1;
write_unlock(&n->lock);
+ if (n->parms->neigh_cleanup)
+ n->parms->neigh_cleanup(n);
neigh_release(n);
continue;
}
kfree(parms);
}
+static struct lock_class_key neigh_table_proxy_queue_class;
+
void neigh_table_init_no_netlink(struct neigh_table *tbl)
{
unsigned long now = jiffies;
init_timer(&tbl->proxy_timer);
tbl->proxy_timer.data = (unsigned long)tbl;
tbl->proxy_timer.function = neigh_proxy_process;
- skb_queue_head_init(&tbl->proxy_queue);
+ skb_queue_head_init_class(&tbl->proxy_queue,
+ &neigh_table_proxy_queue_class);
tbl->last_flush = now;
tbl->last_rand = now + tbl->parms.reachable_time * 20;
} else
np = &n->next;
write_unlock(&n->lock);
- if (release)
+ if (release) {
+ if (n->parms->neigh_cleanup)
+ n->parms->neigh_cleanup(n);
neigh_release(n);
+ }
}
}
}
if (skb->len < len || len < iph->ihl*4)
goto out;
+ /*
+ * Our transport medium may have padded the buffer out.
+ * Now We trim to the true length of the frame.
+ */
+ if (pskb_trim_rcsum(skb, len))
+ goto out;
+
if (iph->protocol != IPPROTO_UDP)
goto out;
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/capability.h>
+#include <linux/freezer.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/list.h>
t->control &= ~(T_REMDEV);
}
+ try_to_freeze();
+
set_current_state(TASK_INTERRUPTIBLE);
}
if (err < 0)
goto errout;
- iw += IW_EV_POINT_OFF;
+ /* Payload is at an offset in buffer */
+ iw = iw_buf + IW_EV_POINT_OFF;
}
#endif /* CONFIG_NET_WIRELESS_RTNETLINK */
goto out;
}
-/**
- * alloc_skb_from_cache - allocate a network buffer
- * @cp: kmem_cache from which to allocate the data area
- * (object size must be big enough for @size bytes + skb overheads)
- * @size: size to allocate
- * @gfp_mask: allocation mask
- *
- * Allocate a new &sk_buff. The returned buffer has no headroom and
- * tail room of size bytes. The object has a reference count of one.
- * The return is the buffer. On a failure the return is %NULL.
- *
- * Buffers may only be allocated from interrupts using a @gfp_mask of
- * %GFP_ATOMIC.
- */
-struct sk_buff *alloc_skb_from_cache(struct kmem_cache *cp,
- unsigned int size,
- gfp_t gfp_mask)
-{
- struct sk_buff *skb;
- u8 *data;
-
- /* Get the HEAD */
- skb = kmem_cache_alloc(skbuff_head_cache,
- gfp_mask & ~__GFP_DMA);
- if (!skb)
- goto out;
-
- /* Get the DATA. */
- size = SKB_DATA_ALIGN(size);
- data = kmem_cache_alloc(cp, gfp_mask);
- if (!data)
- goto nodata;
-
- memset(skb, 0, offsetof(struct sk_buff, truesize));
- skb->truesize = size + sizeof(struct sk_buff);
- atomic_set(&skb->users, 1);
- skb->head = data;
- skb->data = data;
- skb->tail = data;
- skb->end = data + size;
-
- atomic_set(&(skb_shinfo(skb)->dataref), 1);
- skb_shinfo(skb)->nr_frags = 0;
- skb_shinfo(skb)->gso_size = 0;
- skb_shinfo(skb)->gso_segs = 0;
- skb_shinfo(skb)->gso_type = 0;
- skb_shinfo(skb)->frag_list = NULL;
-out:
- return skb;
-nodata:
- kmem_cache_free(skbuff_head_cache, skb);
- skb = NULL;
- goto out;
-}
-
/**
* __netdev_alloc_skb - allocate an skbuff for rx on a specific device
* @dev: network device to receive on
n->tc_verd = SET_TC_VERD(skb->tc_verd,0);
n->tc_verd = CLR_TC_OK2MUNGE(n->tc_verd);
n->tc_verd = CLR_TC_MUNGED(n->tc_verd);
- C(input_dev);
+ C(iif);
#endif
skb_copy_secmark(n, skb);
#endif
*
* (We also register the sk_lock with the lock validator.)
*/
-static void inline sock_lock_init(struct sock *sk)
+static inline void sock_lock_init(struct sock *sk)
{
sock_lock_init_class_and_name(sk,
af_family_slock_key_strings[sk->sk_family],
* This file implement the Wireless Extensions APIs.
*
* Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
- * Copyright (c) 1997-2006 Jean Tourrilhes, All Rights Reserved.
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
*
* (As all part of the Linux kernel, this file is GPL)
*/
* o Change length in ESSID and NICK to strlen() instead of strlen()+1
* o Make standard_ioctl_num and standard_event_num unsigned
* o Remove (struct net_device *)->get_wireless_stats()
+ *
+ * v10 - 16.3.07 - Jean II
+ * o Prevent leaking of kernel space in stream on 64 bits.
*/
/***************************** INCLUDES *****************************/
IW_EV_QUAL_LEN, /* IW_HEADER_TYPE_QUAL */
};
+/* Size (in bytes) of various events, as packed */
+static const int event_type_pk_size[] = {
+ IW_EV_LCP_PK_LEN, /* IW_HEADER_TYPE_NULL */
+ 0,
+ IW_EV_CHAR_PK_LEN, /* IW_HEADER_TYPE_CHAR */
+ 0,
+ IW_EV_UINT_PK_LEN, /* IW_HEADER_TYPE_UINT */
+ IW_EV_FREQ_PK_LEN, /* IW_HEADER_TYPE_FREQ */
+ IW_EV_ADDR_PK_LEN, /* IW_HEADER_TYPE_ADDR */
+ 0,
+ IW_EV_POINT_PK_LEN, /* Without variable payload */
+ IW_EV_PARAM_PK_LEN, /* IW_HEADER_TYPE_PARAM */
+ IW_EV_QUAL_PK_LEN, /* IW_HEADER_TYPE_QUAL */
+};
+
/************************ COMMON SUBROUTINES ************************/
/*
* Stuff that may be used in various place or doesn't fit in one
memcpy(buffer + IW_EV_POINT_OFF, request, request_len);
/* Use our own copy of wrqu */
wrqu = (union iwreq_data *) (buffer + IW_EV_POINT_OFF
- + IW_EV_LCP_LEN);
+ + IW_EV_LCP_PK_LEN);
/* No extra arguments. Trivial to handle */
ret = handler(dev, &info, wrqu, NULL);
/* Get a temp copy of wrqu (skip pointer) */
memcpy(((char *) &wrqu_point) + IW_EV_POINT_OFF,
- ((char *) request) + IW_EV_LCP_LEN,
- IW_EV_POINT_LEN - IW_EV_LCP_LEN);
+ ((char *) request) + IW_EV_LCP_PK_LEN,
+ IW_EV_POINT_LEN - IW_EV_LCP_PK_LEN);
/* Calculate space needed by arguments. Always allocate
* for max space. Easier, and won't last long... */
(wrqu_point.data.length > descr->max_tokens))
extra_size = (wrqu_point.data.length
* descr->token_size);
- buffer_size = extra_size + IW_EV_POINT_LEN + IW_EV_POINT_OFF;
+ buffer_size = extra_size + IW_EV_POINT_PK_LEN + IW_EV_POINT_OFF;
#ifdef WE_RTNETLINK_DEBUG
printk(KERN_DEBUG "%s (WE.r) : Malloc %d bytes (%d bytes)\n",
dev->name, extra_size, buffer_size);
/* Put wrqu in the right place (just before extra).
* Leave space for IWE header and dummy pointer...
- * Note that IW_EV_LCP_LEN==4 bytes, so it's still aligned...
+ * Note that IW_EV_LCP_PK_LEN==4 bytes, so it's still aligned.
*/
- memcpy(buffer + IW_EV_LCP_LEN + IW_EV_POINT_OFF,
+ memcpy(buffer + IW_EV_LCP_PK_LEN + IW_EV_POINT_OFF,
((char *) &wrqu_point) + IW_EV_POINT_OFF,
- IW_EV_POINT_LEN - IW_EV_LCP_LEN);
- wrqu = (union iwreq_data *) (buffer + IW_EV_LCP_LEN);
+ IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
+ wrqu = (union iwreq_data *) (buffer + IW_EV_LCP_PK_LEN);
/* Extra comes logically after that. Offset +12 bytes. */
- extra = buffer + IW_EV_POINT_OFF + IW_EV_POINT_LEN;
+ extra = buffer + IW_EV_POINT_OFF + IW_EV_POINT_PK_LEN;
/* Call the handler */
ret = handler(dev, &info, wrqu, extra);
/* Calculate real returned length */
extra_size = (wrqu->data.length * descr->token_size);
/* Re-adjust reply size */
- request->len = extra_size + IW_EV_POINT_LEN;
+ request->len = extra_size + IW_EV_POINT_PK_LEN;
/* Put the iwe header where it should, i.e. scrap the
* dummy pointer. */
- memcpy(buffer + IW_EV_POINT_OFF, request, IW_EV_LCP_LEN);
+ memcpy(buffer + IW_EV_POINT_OFF, request, IW_EV_LCP_PK_LEN);
#ifdef WE_RTNETLINK_DEBUG
printk(KERN_DEBUG "%s (WE.r) : Reply 0x%04X, hdr_len %d, tokens %d, extra_size %d, buffer_size %d\n", dev->name, cmd, hdr_len, wrqu->data.length, extra_size, buffer_size);
#endif /* WE_RTNETLINK_DEBUG */
/* Extract fixed header from request. This is properly aligned. */
- wrqu = &request->u;
+ wrqu = (union iwreq_data *) (((char *) request) + IW_EV_LCP_PK_LEN);
/* Check if wrqu is complete */
- hdr_len = event_type_size[descr->header_type];
+ hdr_len = event_type_pk_size[descr->header_type];
if(request_len < hdr_len) {
#ifdef WE_RTNETLINK_DEBUG
printk(KERN_DEBUG
/* Put wrqu in the right place (skip pointer) */
memcpy(((char *) &wrqu_point) + IW_EV_POINT_OFF,
- wrqu, IW_EV_POINT_LEN - IW_EV_LCP_LEN);
+ wrqu, IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
/* Don't forget about the event code... */
wrqu = &wrqu_point;
hdr_len = extra_size;
extra_size = 0;
} else {
- hdr_len = IW_EV_POINT_LEN;
+ hdr_len = IW_EV_POINT_PK_LEN;
}
/* Check if wrqu is complete */
memcpy(buffer + IW_EV_POINT_OFF, request, request_len);
/* Use our own copy of wrqu */
wrqu = (union iwreq_data *) (buffer + IW_EV_POINT_OFF
- + IW_EV_LCP_LEN);
+ + IW_EV_LCP_PK_LEN);
/* No extra arguments. Trivial to handle */
ret = handler(dev, &info, wrqu, (char *) wrqu);
char * extra;
/* Buffer for full reply */
- buffer_size = extra_size + IW_EV_POINT_LEN + IW_EV_POINT_OFF;
+ buffer_size = extra_size + IW_EV_POINT_PK_LEN + IW_EV_POINT_OFF;
#ifdef WE_RTNETLINK_DEBUG
printk(KERN_DEBUG "%s (WE.r) : Malloc %d bytes (%d bytes)\n",
/* Put wrqu in the right place (just before extra).
* Leave space for IWE header and dummy pointer...
- * Note that IW_EV_LCP_LEN==4 bytes, so it's still aligned...
+ * Note that IW_EV_LCP_PK_LEN==4 bytes, so it's still aligned.
*/
- memcpy(buffer + IW_EV_LCP_LEN + IW_EV_POINT_OFF,
- ((char *) request) + IW_EV_LCP_LEN,
- IW_EV_POINT_LEN - IW_EV_LCP_LEN);
- wrqu = (union iwreq_data *) (buffer + IW_EV_LCP_LEN);
+ memcpy(buffer + IW_EV_LCP_PK_LEN + IW_EV_POINT_OFF,
+ ((char *) request) + IW_EV_LCP_PK_LEN,
+ IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
+ wrqu = (union iwreq_data *) (buffer + IW_EV_LCP_PK_LEN);
/* Extra comes logically after that. Offset +12 bytes. */
- extra = buffer + IW_EV_POINT_OFF + IW_EV_POINT_LEN;
+ extra = buffer + IW_EV_POINT_OFF + IW_EV_POINT_PK_LEN;
/* Call the handler */
ret = handler(dev, &info, wrqu, extra);
if (!(descr->get_args & IW_PRIV_SIZE_FIXED))
extra_size = adjust_priv_size(descr->get_args, wrqu);
/* Re-adjust reply size */
- request->len = extra_size + IW_EV_POINT_LEN;
+ request->len = extra_size + IW_EV_POINT_PK_LEN;
/* Put the iwe header where it should, i.e. scrap the
* dummy pointer. */
- memcpy(buffer + IW_EV_POINT_OFF, request, IW_EV_LCP_LEN);
+ memcpy(buffer + IW_EV_POINT_OFF, request, IW_EV_LCP_PK_LEN);
#ifdef WE_RTNETLINK_DEBUG
printk(KERN_DEBUG "%s (WE.r) : Reply 0x%04X, hdr_len %d, tokens %d, extra_size %d, buffer_size %d\n", dev->name, cmd, hdr_len, wrqu->data.length, extra_size, buffer_size);
/* Does it fits in wrqu ? */
if((descr->set_args & IW_PRIV_SIZE_FIXED) &&
(extra_size <= IFNAMSIZ)) {
- hdr_len = IW_EV_LCP_LEN + extra_size;
+ hdr_len = IW_EV_LCP_PK_LEN + extra_size;
extra_size = 0;
} else {
- hdr_len = IW_EV_POINT_LEN;
+ hdr_len = IW_EV_POINT_PK_LEN;
}
/* Extract fixed header from request. This is properly aligned. */
- wrqu = &request->u;
+ wrqu = (union iwreq_data *) (((char *) request) + IW_EV_LCP_PK_LEN);
/* Check if wrqu is complete */
if(request_len < hdr_len) {
/* Put wrqu in the right place (skip pointer) */
memcpy(((char *) &wrqu_point) + IW_EV_POINT_OFF,
- wrqu, IW_EV_POINT_LEN - IW_EV_LCP_LEN);
+ wrqu, IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
/* Does it fits within bounds ? */
if(wrqu_point.data.length > (descr->set_args &
iw_handler handler;
/* Check length */
- if(len < IW_EV_LCP_LEN) {
+ if(len < IW_EV_LCP_PK_LEN) {
printk(KERN_DEBUG "%s (WE.r) : RtNetlink request too short (%d)\n",
dev->name, len);
return -EINVAL;
iw_handler handler;
/* Check length */
- if(len < IW_EV_LCP_LEN) {
+ if(len < IW_EV_LCP_PK_LEN) {
printk(KERN_DEBUG "%s (WE.r) : RtNetlink request too short (%d)\n",
dev->name, len);
return -EINVAL;
const enum dccp_pkt_type pkt_type);
extern void dccp_write_xmit(struct sock *sk, int block);
-extern void dccp_write_xmit_timer(unsigned long data);
extern void dccp_write_space(struct sock *sk);
extern void dccp_init_xmit_timers(struct sock *sk);
if (get_user(len, optlen))
return -EFAULT;
- if (len < sizeof(int))
+ if (len < (int)sizeof(int))
return -EINVAL;
dp = dccp_sk(sk);
(__be32 __user *)optval, optlen);
case DCCP_SOCKOPT_SEND_CSCOV:
val = dp->dccps_pcslen;
+ len = sizeof(val);
break;
case DCCP_SOCKOPT_RECV_CSCOV:
val = dp->dccps_pcrlen;
+ len = sizeof(val);
break;
case 128 ... 191:
return ccid_hc_rx_getsockopt(dp->dccps_hc_rx_ccid, sk, optname,
}
/* Transmit-delay timer: used by the CCIDs to delay actual send time */
-void dccp_write_xmit_timer(unsigned long data)
+static void dccp_write_xmit_timer(unsigned long data)
{
struct sock *sk = (struct sock *)data;
struct dccp_sock *dp = dccp_sk(sk);
{
int error;
u8 scope;
-} dn_fib_props[RTA_MAX+1] = {
+} dn_fib_props[RTN_MAX+1] = {
[RTN_UNSPEC] = { .error = 0, .scope = RT_SCOPE_NOWHERE },
[RTN_UNICAST] = { .error = 0, .scope = RT_SCOPE_UNIVERSE },
[RTN_LOCAL] = { .error = 0, .scope = RT_SCOPE_HOST },
struct dn_fib_info *ofi;
int nhs = 1;
+ if (r->rtm_type > RTN_MAX)
+ goto err_inval;
+
if (dn_fib_props[r->rtm_type].scope > r->rtm_scope)
goto err_inval;
static struct nla_policy dn_fib_rule_policy[FRA_MAX+1] __read_mostly = {
FRA_GENERIC_POLICY,
- [FRA_SRC] = { .type = NLA_U16 },
- [FRA_DST] = { .type = NLA_U16 },
};
static int dn_fib_rule_match(struct fib_rule *rule, struct flowi *fl, int flags)
int err = -EINVAL;
struct dn_fib_rule *r = (struct dn_fib_rule *)rule;
- if (frh->src_len > 16 || frh->dst_len > 16 || frh->tos)
+ if (frh->tos)
goto errout;
if (rule->table == RT_TABLE_UNSPEC) {
}
}
- if (tb[FRA_SRC])
+ if (frh->src_len)
r->src = nla_get_le16(tb[FRA_SRC]);
- if (tb[FRA_DST])
+ if (frh->dst_len)
r->dst = nla_get_le16(tb[FRA_DST]);
r->src_len = frh->src_len;
if (frh->dst_len && (r->dst_len != frh->dst_len))
return 0;
- if (tb[FRA_SRC] && (r->src != nla_get_le16(tb[FRA_SRC])))
+ if (frh->src_len && (r->src != nla_get_le16(tb[FRA_SRC])))
return 0;
- if (tb[FRA_DST] && (r->dst != nla_get_le16(tb[FRA_DST])))
+ if (frh->dst_len && (r->dst != nla_get_le16(tb[FRA_DST])))
return 0;
return 1;
static struct fib_rules_ops dn_fib_rules_ops = {
.family = AF_DECnet,
.rule_size = sizeof(struct dn_fib_rule),
+ .addr_size = sizeof(u16),
.action = dn_fib_rule_action,
.match = dn_fib_rule_match,
.configure = dn_fib_rule_configure,
Include software based cipher suites in support of IEEE
802.11's WEP. This is needed for WEP as well as 802.1x.
- This can be compiled as a modules and it will be called
+ This can be compiled as a module and it will be called
"ieee80211_crypt_wep".
config IEEE80211_CRYPT_CCMP
(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
networks.
- This can be compiled as a modules and it will be called
+ This can be compiled as a module and it will be called
"ieee80211_crypt_ccmp".
config IEEE80211_CRYPT_TKIP
(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with TKIP enabled
networks.
- This can be compiled as a modules and it will be called
+ This can be compiled as a module and it will be called
"ieee80211_crypt_tkip".
source "net/ieee80211/softmac/Kconfig"
cfg->fc_nlinfo.pid = NETLINK_CB(skb).pid;
cfg->fc_nlinfo.nlh = nlh;
+ if (cfg->fc_type > RTN_MAX) {
+ err = -EINVAL;
+ goto errout;
+ }
+
nlmsg_for_each_attr(attr, nlh, sizeof(struct rtmsg), remaining) {
switch (attr->nla_type) {
case RTA_DST:
.nl_u = { .ip4_u = { .daddr = frn->fl_addr,
.tos = frn->fl_tos,
.scope = frn->fl_scope } } };
+
+ frn->err = -ENOENT;
if (tb) {
local_bh_disable();
frn->nh_sel = res.nh_sel;
frn->type = res.type;
frn->scope = res.scope;
+ fib_res_put(&res);
}
local_bh_enable();
}
struct fib_table *tb;
skb = skb_dequeue(&sk->sk_receive_queue);
+ if (skb == NULL)
+ return;
+
nlh = (struct nlmsghdr *)skb->data;
if (skb->len < NLMSG_SPACE(0) || skb->len < nlh->nlmsg_len ||
nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*frn))) {
nl_fib_lookup(frn, tb);
- pid = nlh->nlmsg_pid; /*pid of sending process */
+ pid = NETLINK_CB(skb).pid; /* pid of sending process */
NETLINK_CB(skb).pid = 0; /* from kernel */
NETLINK_CB(skb).dst_group = 0; /* unicast */
netlink_unicast(sk, skb, pid, MSG_DONTWAIT);
static struct nla_policy fib4_rule_policy[FRA_MAX+1] __read_mostly = {
FRA_GENERIC_POLICY,
- [FRA_SRC] = { .type = NLA_U32 },
- [FRA_DST] = { .type = NLA_U32 },
[FRA_FLOW] = { .type = NLA_U32 },
};
int err = -EINVAL;
struct fib4_rule *rule4 = (struct fib4_rule *) rule;
- if (frh->src_len > 32 || frh->dst_len > 32 ||
- (frh->tos & ~IPTOS_TOS_MASK))
+ if (frh->tos & ~IPTOS_TOS_MASK)
goto errout;
if (rule->table == RT_TABLE_UNSPEC) {
}
}
- if (tb[FRA_SRC])
+ if (frh->src_len)
rule4->src = nla_get_be32(tb[FRA_SRC]);
- if (tb[FRA_DST])
+ if (frh->dst_len)
rule4->dst = nla_get_be32(tb[FRA_DST]);
#ifdef CONFIG_NET_CLS_ROUTE
return 0;
#endif
- if (tb[FRA_SRC] && (rule4->src != nla_get_be32(tb[FRA_SRC])))
+ if (frh->src_len && (rule4->src != nla_get_be32(tb[FRA_SRC])))
return 0;
- if (tb[FRA_DST] && (rule4->dst != nla_get_be32(tb[FRA_DST])))
+ if (frh->dst_len && (rule4->dst != nla_get_be32(tb[FRA_DST])))
return 0;
return 1;
static struct fib_rules_ops fib4_rules_ops = {
.family = AF_INET,
.rule_size = sizeof(struct fib4_rule),
+ .addr_size = sizeof(u32),
.action = fib4_rule_action,
.match = fib4_rule_match,
.configure = fib4_rule_configure,
{
int error;
u8 scope;
-} fib_props[RTA_MAX + 1] = {
+} fib_props[RTN_MAX + 1] = {
{
.error = 0,
.scope = RT_SCOPE_NOWHERE,
return fa_head;
}
+/*
+ * Caller must hold RTNL.
+ */
static int fn_trie_insert(struct fib_table *tb, struct fib_config *cfg)
{
struct trie *t = (struct trie *) tb->tb_data;
return 1;
}
+/*
+ * Caller must hold RTNL.
+ */
static int fn_trie_delete(struct fib_table *tb, struct fib_config *cfg)
{
struct trie *t = (struct trie *) tb->tb_data;
return NULL; /* Ready. Root of trie */
}
+/*
+ * Caller must hold RTNL.
+ */
static int fn_trie_flush(struct fib_table *tb)
{
struct trie *t = (struct trie *) tb->tb_data;
return 0;
}
- for (i = 0, ret = 0; i < IFNAMSIZ/sizeof(unsigned long); i++) {
- unsigned long odev;
- memcpy(&odev, outdev + i*sizeof(unsigned long),
- sizeof(unsigned long));
- ret |= (odev
- ^ ((const unsigned long *)arpinfo->outiface)[i])
- & ((const unsigned long *)arpinfo->outiface_mask)[i];
+ for (i = 0, ret = 0; i < IFNAMSIZ; i++) {
+ ret |= (outdev[i] ^ arpinfo->outiface[i])
+ & arpinfo->outiface_mask[i];
}
if (FWINV(ret != 0, ARPT_INV_VIA_OUT)) {
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
if (ct->tuplehash[dir].tuple.dst.ip !=
- ct->tuplehash[!dir].tuple.src.ip
-#ifdef CONFIG_XFRM
- || ct->tuplehash[dir].tuple.dst.u.all !=
- ct->tuplehash[!dir].tuple.src.u.all
-#endif
- )
+ ct->tuplehash[!dir].tuple.src.ip) {
if (ip_route_me_harder(pskb, RTN_UNSPEC))
ret = NF_DROP;
+ }
+#ifdef CONFIG_XFRM
+ else if (ct->tuplehash[dir].tuple.dst.u.all !=
+ ct->tuplehash[!dir].tuple.src.u.all)
+ if (ip_xfrm_me_harder(pskb))
+ ret = NF_DROP;
+#endif
+
}
return ret;
}
"has invalid config pointer!\n");
return 0;
}
- clusterip_config_entry_get(cipinfo->config);
} else {
/* Case B: This is a new rule referring to an existing
* clusterip config. */
cipinfo->config = config;
- clusterip_config_entry_get(cipinfo->config);
}
} else {
/* Case C: This is a completely new clusterip config */
#include <linux/netfilter_ipv4/ipt_ULOG.h>
#include <net/sock.h>
#include <linux/bitops.h>
+#include <asm/unaligned.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
/* copy hook, prefix, timestamp, payload, etc. */
pm->data_len = copy_len;
- pm->timestamp_sec = skb->tstamp.off_sec;
- pm->timestamp_usec = skb->tstamp.off_usec;
- pm->mark = skb->mark;
+ put_unaligned(skb->tstamp.off_sec, &pm->timestamp_sec);
+ put_unaligned(skb->tstamp.off_usec, &pm->timestamp_usec);
+ put_unaligned(skb->mark, &pm->mark);
pm->hook = hooknum;
if (prefix != NULL)
strncpy(pm->prefix, prefix, sizeof(pm->prefix));
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
if (ct->tuplehash[dir].tuple.dst.u3.ip !=
- ct->tuplehash[!dir].tuple.src.u3.ip
-#ifdef CONFIG_XFRM
- || ct->tuplehash[dir].tuple.dst.u.all !=
- ct->tuplehash[!dir].tuple.src.u.all
-#endif
- )
+ ct->tuplehash[!dir].tuple.src.u3.ip) {
if (ip_route_me_harder(pskb, RTN_UNSPEC))
ret = NF_DROP;
+ }
+#ifdef CONFIG_XFRM
+ else if (ct->tuplehash[dir].tuple.dst.u.all !=
+ ct->tuplehash[!dir].tuple.src.u.all)
+ if (ip_xfrm_me_harder(pskb))
+ ret = NF_DROP;
+#endif
}
return ret;
}
struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_congestion_ops *ca;
- if (icsk->icsk_ca_ops != &tcp_init_congestion_ops)
- return;
+ /* if no choice made yet assign the current value set as default */
+ if (icsk->icsk_ca_ops == &tcp_init_congestion_ops) {
+ rcu_read_lock();
+ list_for_each_entry_rcu(ca, &tcp_cong_list, list) {
+ if (try_module_get(ca->owner)) {
+ icsk->icsk_ca_ops = ca;
+ break;
+ }
- rcu_read_lock();
- list_for_each_entry_rcu(ca, &tcp_cong_list, list) {
- if (try_module_get(ca->owner)) {
- icsk->icsk_ca_ops = ca;
- break;
+ /* fallback to next available */
}
-
+ rcu_read_unlock();
}
- rcu_read_unlock();
if (icsk->icsk_ca_ops->init)
icsk->icsk_ca_ops->init(sk);
rcu_read_lock();
ca = tcp_ca_find(name);
+
/* no change asking for existing value */
if (ca == icsk->icsk_ca_ops)
goto out;
else {
tcp_cleanup_congestion_control(sk);
icsk->icsk_ca_ops = ca;
- if (icsk->icsk_ca_ops->init)
+
+ if (sk->sk_state != TCP_CLOSE && icsk->icsk_ca_ops->init)
icsk->icsk_ca_ops->init(sk);
}
out:
if (tp->packets_out > tp->snd_cwnd_used)
tp->snd_cwnd_used = tp->packets_out;
- if ((s32)(tcp_time_stamp - tp->snd_cwnd_stamp) >= inet_csk(sk)->icsk_rto)
+ if (sysctl_tcp_slow_start_after_idle &&
+ (s32)(tcp_time_stamp - tp->snd_cwnd_stamp) >= inet_csk(sk)->icsk_rto)
tcp_cwnd_application_limited(sk);
}
}
*/
if (window <= free_space - mss || window > free_space)
window = (free_space/mss)*mss;
+ else if (mss == full_space &&
+ free_space > window + full_space/2)
+ window = free_space;
}
return window;
skb->nh.raw = skb_push(skb, x->props.header_len + hdrlen);
top_iph = skb->nh.iph;
- hdrlen = iph->ihl * 4 - optlen;
- skb->h.raw += hdrlen;
+ skb->h.raw += sizeof(*iph) - hdrlen;
- memmove(top_iph, iph, hdrlen);
+ memmove(top_iph, iph, sizeof(*iph));
if (unlikely(optlen)) {
struct ip_beet_phdr *ph;
ph = (struct ip_beet_phdr *)skb->h.raw;
ph->padlen = 4 - (optlen & 4);
- ph->hdrlen = (optlen + ph->padlen + sizeof(*ph)) / 8;
+ ph->hdrlen = optlen / 8;
ph->nexthdr = top_iph->protocol;
+ if (ph->padlen)
+ memset(ph + 1, IPOPT_NOP, ph->padlen);
top_iph->protocol = IPPROTO_BEETPH;
top_iph->ihl = sizeof(struct iphdr) / 4;
protocol = iph->protocol;
if (unlikely(iph->protocol == IPPROTO_BEETPH)) {
- struct ip_beet_phdr *ph = (struct ip_beet_phdr*)(iph + 1);
+ struct ip_beet_phdr *ph;
if (!pskb_may_pull(skb, sizeof(*ph)))
goto out;
+ ph = (struct ip_beet_phdr *)(skb->h.ipiph + 1);
- phlen = ph->hdrlen * 8;
- optlen = phlen - ph->padlen - sizeof(*ph);
+ phlen = sizeof(*ph) + ph->padlen;
+ optlen = ph->hdrlen * 8 + (IPV4_BEET_PHMAXLEN - phlen);
if (optlen < 0 || optlen & 3 || optlen > 250)
goto out;
- if (!pskb_may_pull(skb, phlen))
+ if (!pskb_may_pull(skb, phlen + optlen))
goto out;
+ skb->len -= phlen + optlen;
ph_nexthdr = ph->nexthdr;
}
- skb_push(skb, sizeof(*iph) - phlen + optlen);
- memmove(skb->data, skb->nh.raw, sizeof(*iph));
- skb->nh.raw = skb->data;
+ skb->nh.raw = skb->data + (phlen - sizeof(*iph));
+ memmove(skb->nh.raw, iph, sizeof(*iph));
+ skb->h.raw = skb->data + (phlen + optlen);
+ skb->data = skb->h.raw;
iph = skb->nh.iph;
iph->ihl = (sizeof(*iph) + optlen) / 4;
- iph->tot_len = htons(skb->len);
+ iph->tot_len = htons(skb->len + iph->ihl * 4);
iph->daddr = x->sel.daddr.a4;
iph->saddr = x->sel.saddr.a4;
if (ph_nexthdr)
#endif
#endif
.proxy_ndp = 0,
+ .accept_source_route = 0, /* we do not accept RH0 by default. */
};
static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
#endif
#endif
.proxy_ndp = 0,
+ .accept_source_route = 0, /* we do not accept RH0 by default. */
};
/* IPv6 Wildcard Address and Loopback Address defined by RFC2553 */
}
#endif
+ if (netif_running(dev) && netif_carrier_ok(dev))
+ ndev->if_flags |= IF_READY;
+
ipv6_mc_init_dev(ndev);
ndev->tstamp = jiffies;
#ifdef CONFIG_SYSCTL
#define IPV6_SADDR_SCORE_LABEL 0x0020
#define IPV6_SADDR_SCORE_PRIVACY 0x0040
-static int inline ipv6_saddr_preferred(int type)
+static inline int ipv6_saddr_preferred(int type)
{
if (type & (IPV6_ADDR_MAPPED|IPV6_ADDR_COMPATv4|
IPV6_ADDR_LOOPBACK|IPV6_ADDR_RESERVED))
}
/* static matching label */
-static int inline ipv6_saddr_label(const struct in6_addr *addr, int type)
+static inline int ipv6_saddr_label(const struct in6_addr *addr, int type)
{
/*
* prefix (longest match) label
rtnl_set_sk_err(RTNLGRP_IPV6_IFADDR, err);
}
-static void inline ipv6_store_devconf(struct ipv6_devconf *cnf,
+static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
__s32 *array, int bytes)
{
BUG_ON(bytes < (DEVCONF_MAX * 4));
#endif
#endif
array[DEVCONF_PROXY_NDP] = cnf->proxy_ndp;
+ array[DEVCONF_ACCEPT_SOURCE_ROUTE] = cnf->accept_source_route;
}
static inline size_t inet6_if_nlmsg_size(void)
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+ {
+ .ctl_name = NET_IPV6_ACCEPT_SOURCE_ROUTE,
+ .procname = "accept_source_route",
+ .data = &ipv6_devconf.accept_source_route,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
{
.ctl_name = 0, /* sentinel */
}
struct inet6_skb_parm *opt = IP6CB(skb);
struct in6_addr *addr = NULL;
struct in6_addr daddr;
+ struct inet6_dev *idev;
int n, i;
-
struct ipv6_rt_hdr *hdr;
struct rt0_hdr *rthdr;
+ int accept_source_route = ipv6_devconf.accept_source_route;
+
+ if (accept_source_route < 0 ||
+ ((idev = in6_dev_get(skb->dev)) == NULL)) {
+ kfree_skb(skb);
+ return -1;
+ }
+ if (idev->cnf.accept_source_route < 0) {
+ in6_dev_put(idev);
+ kfree_skb(skb);
+ return -1;
+ }
+
+ if (accept_source_route > idev->cnf.accept_source_route)
+ accept_source_route = idev->cnf.accept_source_route;
+
+ in6_dev_put(idev);
if (!pskb_may_pull(skb, (skb->h.raw-skb->data)+8) ||
!pskb_may_pull(skb, (skb->h.raw-skb->data)+((skb->h.raw[1]+1)<<3))) {
hdr = (struct ipv6_rt_hdr *) skb->h.raw;
+ switch (hdr->type) {
+#ifdef CONFIG_IPV6_MIP6
+ break;
+#endif
+ case IPV6_SRCRT_TYPE_0:
+ if (accept_source_route > 0)
+ break;
+ kfree_skb(skb);
+ return -1;
+ default:
+ IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
+ IPSTATS_MIB_INHDRERRORS);
+ icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, (&hdr->type) - skb->nh.raw);
+ return -1;
+ }
+
if (ipv6_addr_is_multicast(&skb->nh.ipv6h->daddr) ||
skb->pkt_type != PACKET_HOST) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
}
break;
#endif
- default:
- IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
- IPSTATS_MIB_INHDRERRORS);
- icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, (&hdr->type) - skb->nh.raw);
- return -1;
}
/*
static struct nla_policy fib6_rule_policy[FRA_MAX+1] __read_mostly = {
FRA_GENERIC_POLICY,
- [FRA_SRC] = { .len = sizeof(struct in6_addr) },
- [FRA_DST] = { .len = sizeof(struct in6_addr) },
};
static int fib6_rule_configure(struct fib_rule *rule, struct sk_buff *skb,
int err = -EINVAL;
struct fib6_rule *rule6 = (struct fib6_rule *) rule;
- if (frh->src_len > 128 || frh->dst_len > 128)
- goto errout;
-
if (rule->action == FR_ACT_TO_TBL) {
if (rule->table == RT6_TABLE_UNSPEC)
goto errout;
}
}
- if (tb[FRA_SRC])
+ if (frh->src_len)
nla_memcpy(&rule6->src.addr, tb[FRA_SRC],
sizeof(struct in6_addr));
- if (tb[FRA_DST])
+ if (frh->dst_len)
nla_memcpy(&rule6->dst.addr, tb[FRA_DST],
sizeof(struct in6_addr));
if (frh->tos && (rule6->tclass != frh->tos))
return 0;
- if (tb[FRA_SRC] &&
+ if (frh->src_len &&
nla_memcmp(tb[FRA_SRC], &rule6->src.addr, sizeof(struct in6_addr)))
return 0;
- if (tb[FRA_DST] &&
+ if (frh->dst_len &&
nla_memcmp(tb[FRA_DST], &rule6->dst.addr, sizeof(struct in6_addr)))
return 0;
static struct fib_rules_ops fib6_rules_ops = {
.family = AF_INET6,
.rule_size = sizeof(struct fib6_rule),
+ .addr_size = sizeof(struct in6_addr),
.action = fib6_rule_action,
.match = fib6_rule_match,
.configure = fib6_rule_configure,
ins = &iter->u.dst.rt6_next;
}
+ /* Reset round-robin state, if necessary */
+ if (ins == &fn->leaf)
+ fn->rr_ptr = NULL;
+
/*
* insert node
*/
rt6_stats.fib_rt_entries--;
rt6_stats.fib_discarded_routes++;
+ /* Reset round-robin state, if necessary */
+ if (fn->rr_ptr == rt)
+ fn->rr_ptr = NULL;
+
/* Adjust walkers */
read_lock(&fib6_walker_lock);
FOR_WALKERS(w) {
/* pkt_len may be zero if Jumbo payload option is present */
if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
- if (pkt_len + sizeof(struct ipv6hdr) > skb->len)
- goto truncated;
+ if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
+ IP6_INC_STATS_BH(idev, IPSTATS_MIB_INTRUNCATEDPKTS);
+ goto drop;
+ }
if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
goto drop;
rcu_read_unlock();
return NF_HOOK(PF_INET6,NF_IP6_PRE_ROUTING, skb, dev, NULL, ip6_rcv_finish);
-truncated:
- IP6_INC_STATS_BH(idev, IPSTATS_MIB_INTRUNCATEDPKTS);
err:
IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
drop:
int err;
/* Rough check on arithmetic overflow,
- better check is made in ip6_build_xmit
+ better check is made in ip6_append_data().
*/
- if (len < 0)
+ if (len > INT_MAX)
return -EMSGSIZE;
/* Mirror BSD error message compatibility */
/*
* Default Router Selection (RFC 2461 6.3.6)
*/
-static int inline rt6_check_dev(struct rt6_info *rt, int oif)
+static inline int rt6_check_dev(struct rt6_info *rt, int oif)
{
struct net_device *dev = rt->rt6i_dev;
- int ret = 0;
-
- if (!oif)
- return 2;
- if (dev->flags & IFF_LOOPBACK) {
- if (!WARN_ON(rt->rt6i_idev == NULL) &&
- rt->rt6i_idev->dev->ifindex == oif)
- ret = 1;
- else
- return 0;
- }
- if (dev->ifindex == oif)
+ if (!oif || dev->ifindex == oif)
return 2;
-
- return ret;
+ if ((dev->flags & IFF_LOOPBACK) &&
+ rt->rt6i_idev && rt->rt6i_idev->dev->ifindex == oif)
+ return 1;
+ return 0;
}
-static int inline rt6_check_neigh(struct rt6_info *rt)
+static inline int rt6_check_neigh(struct rt6_info *rt)
{
struct neighbour *neigh = rt->rt6i_nexthop;
int m = 0;
return m;
}
-static struct rt6_info *rt6_select(struct rt6_info **head, int oif,
- int strict)
+static struct rt6_info *find_match(struct rt6_info *rt, int oif, int strict,
+ int *mpri, struct rt6_info *match)
{
- struct rt6_info *match = NULL, *last = NULL;
- struct rt6_info *rt, *rt0 = *head;
- u32 metric;
+ int m;
+
+ if (rt6_check_expired(rt))
+ goto out;
+
+ m = rt6_score_route(rt, oif, strict);
+ if (m < 0)
+ goto out;
+
+ if (m > *mpri) {
+ if (strict & RT6_LOOKUP_F_REACHABLE)
+ rt6_probe(match);
+ *mpri = m;
+ match = rt;
+ } else if (strict & RT6_LOOKUP_F_REACHABLE) {
+ rt6_probe(rt);
+ }
+
+out:
+ return match;
+}
+
+static struct rt6_info *find_rr_leaf(struct fib6_node *fn,
+ struct rt6_info *rr_head,
+ u32 metric, int oif, int strict)
+{
+ struct rt6_info *rt, *match;
int mpri = -1;
- RT6_TRACE("%s(head=%p(*head=%p), oif=%d)\n",
- __FUNCTION__, head, head ? *head : NULL, oif);
+ match = NULL;
+ for (rt = rr_head; rt && rt->rt6i_metric == metric;
+ rt = rt->u.dst.rt6_next)
+ match = find_match(rt, oif, strict, &mpri, match);
+ for (rt = fn->leaf; rt && rt != rr_head && rt->rt6i_metric == metric;
+ rt = rt->u.dst.rt6_next)
+ match = find_match(rt, oif, strict, &mpri, match);
- for (rt = rt0, metric = rt0->rt6i_metric;
- rt && rt->rt6i_metric == metric && (!last || rt != rt0);
- rt = rt->u.dst.rt6_next) {
- int m;
+ return match;
+}
- if (rt6_check_expired(rt))
- continue;
+static struct rt6_info *rt6_select(struct fib6_node *fn, int oif, int strict)
+{
+ struct rt6_info *match, *rt0;
- last = rt;
+ RT6_TRACE("%s(fn->leaf=%p, oif=%d)\n",
+ __FUNCTION__, fn->leaf, oif);
- m = rt6_score_route(rt, oif, strict);
- if (m < 0)
- continue;
+ rt0 = fn->rr_ptr;
+ if (!rt0)
+ fn->rr_ptr = rt0 = fn->leaf;
- if (m > mpri) {
- if (strict & RT6_LOOKUP_F_REACHABLE)
- rt6_probe(match);
- match = rt;
- mpri = m;
- } else if (strict & RT6_LOOKUP_F_REACHABLE) {
- rt6_probe(rt);
- }
- }
+ match = find_rr_leaf(fn, rt0, rt0->rt6i_metric, oif, strict);
if (!match &&
- (strict & RT6_LOOKUP_F_REACHABLE) &&
- last && last != rt0) {
+ (strict & RT6_LOOKUP_F_REACHABLE)) {
+ struct rt6_info *next = rt0->u.dst.rt6_next;
+
/* no entries matched; do round-robin */
- static DEFINE_SPINLOCK(lock);
- spin_lock(&lock);
- *head = rt0->u.dst.rt6_next;
- rt0->u.dst.rt6_next = last->u.dst.rt6_next;
- last->u.dst.rt6_next = rt0;
- spin_unlock(&lock);
+ if (!next || next->rt6i_metric != rt0->rt6i_metric)
+ next = fn->leaf;
+
+ if (next != rt0)
+ fn->rr_ptr = next;
}
- RT6_TRACE("%s() => %p, score=%d\n",
- __FUNCTION__, match, mpri);
+ RT6_TRACE("%s() => %p\n",
+ __FUNCTION__, match);
return (match ? match : &ip6_null_entry);
}
fn = fib6_lookup(&table->tb6_root, &fl->fl6_dst, &fl->fl6_src);
restart:
- rt = rt6_select(&fn->leaf, fl->iif, strict | reachable);
+ rt = rt6_select(fn, fl->iif, strict | reachable);
BACKTRACK(&fl->fl6_src);
if (rt == &ip6_null_entry ||
rt->rt6i_flags & RTF_CACHE)
fn = fib6_lookup(&table->tb6_root, &fl->fl6_dst, &fl->fl6_src);
restart:
- rt = rt6_select(&fn->leaf, fl->oif, strict | reachable);
+ rt = rt6_select(fn, fl->oif, strict | reachable);
BACKTRACK(&fl->fl6_src);
if (rt == &ip6_null_entry ||
rt->rt6i_flags & RTF_CACHE)
* Drop the packet on the floor
*/
-static inline int ip6_pkt_drop(struct sk_buff *skb, int code)
+static inline int ip6_pkt_drop(struct sk_buff *skb, int code,
+ int ipstats_mib_noroutes)
{
- int type = ipv6_addr_type(&skb->nh.ipv6h->daddr);
- if (type == IPV6_ADDR_ANY || type == IPV6_ADDR_RESERVED)
- IP6_INC_STATS(ip6_dst_idev(skb->dst), IPSTATS_MIB_INADDRERRORS);
-
- IP6_INC_STATS(ip6_dst_idev(skb->dst), IPSTATS_MIB_OUTNOROUTES);
+ int type;
+ switch (ipstats_mib_noroutes) {
+ case IPSTATS_MIB_INNOROUTES:
+ type = ipv6_addr_type(&skb->nh.ipv6h->daddr);
+ if (type == IPV6_ADDR_ANY || type == IPV6_ADDR_RESERVED) {
+ IP6_INC_STATS(ip6_dst_idev(skb->dst), IPSTATS_MIB_INADDRERRORS);
+ break;
+ }
+ /* FALLTHROUGH */
+ case IPSTATS_MIB_OUTNOROUTES:
+ IP6_INC_STATS(ip6_dst_idev(skb->dst), ipstats_mib_noroutes);
+ break;
+ }
icmpv6_send(skb, ICMPV6_DEST_UNREACH, code, 0, skb->dev);
kfree_skb(skb);
return 0;
static int ip6_pkt_discard(struct sk_buff *skb)
{
- return ip6_pkt_drop(skb, ICMPV6_NOROUTE);
+ return ip6_pkt_drop(skb, ICMPV6_NOROUTE, IPSTATS_MIB_INNOROUTES);
}
static int ip6_pkt_discard_out(struct sk_buff *skb)
{
skb->dev = skb->dst->dev;
- return ip6_pkt_discard(skb);
+ return ip6_pkt_drop(skb, ICMPV6_NOROUTE, IPSTATS_MIB_OUTNOROUTES);
}
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
static int ip6_pkt_prohibit(struct sk_buff *skb)
{
- return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED);
+ return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_INNOROUTES);
}
static int ip6_pkt_prohibit_out(struct sk_buff *skb)
{
skb->dev = skb->dst->dev;
- return ip6_pkt_prohibit(skb);
+ return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
}
static int ip6_pkt_blk_hole(struct sk_buff *skb)
return udp_sendmsg(iocb, sk, msg, len);
/* Rough check on arithmetic overflow,
- better check is made in ip6_build_xmit
+ better check is made in ip6_append_data().
*/
if (len > INT_MAX - sizeof(struct udphdr))
return -EMSGSIZE;
static struct hlist_head xfrm6_tunnel_spi_byaddr[XFRM6_TUNNEL_SPI_BYADDR_HSIZE];
static struct hlist_head xfrm6_tunnel_spi_byspi[XFRM6_TUNNEL_SPI_BYSPI_HSIZE];
-static unsigned inline xfrm6_tunnel_spi_hash_byaddr(xfrm_address_t *addr)
+static inline unsigned xfrm6_tunnel_spi_hash_byaddr(xfrm_address_t *addr)
{
unsigned h;
return h;
}
-static unsigned inline xfrm6_tunnel_spi_hash_byspi(u32 spi)
+static inline unsigned xfrm6_tunnel_spi_hash_byspi(u32 spi)
{
return spi % XFRM6_TUNNEL_SPI_BYSPI_HSIZE;
}
sk->sk_shutdown |= SEND_SHUTDOWN;
sk->sk_state_change(sk);
- sock_orphan(sk);
release_sock(sk);
/* Close our TSAP.
*/
ret = sock_error(sk);
if (ret)
- break;
+ ;
else if (sk->sk_shutdown & RCV_SHUTDOWN)
;
else if (noblock)
u32 raccm; /* to please pppd - dummy) */
unsigned int flags; /* PPP flags (compression, ...) */
unsigned int rbits; /* Unused receive flags ??? */
-
+ struct work_struct disconnect_work; /* Process context disconnection */
/* ------------------------ IrTTP part ------------------------ */
/* We create a pseudo "socket" over the IrDA tranport */
unsigned long ttp_open; /* Set when IrTTP is ready */
#include "irnet_irda.h" /* Private header */
+/*
+ * PPP disconnect work: we need to make sure we're in
+ * process context when calling ppp_unregister_channel().
+ */
+static void irnet_ppp_disconnect(struct work_struct *work)
+{
+ irnet_socket * self =
+ container_of(work, irnet_socket, disconnect_work);
+
+ if (self == NULL)
+ return;
+ /*
+ * If we were connected, cleanup & close the PPP
+ * channel, which will kill pppd (hangup) and the rest.
+ */
+ if (self->ppp_open && !self->ttp_open && !self->ttp_connect) {
+ ppp_unregister_channel(&self->chan);
+ self->ppp_open = 0;
+ }
+}
+
/************************* CONTROL CHANNEL *************************/
/*
* When ppp is not active, /dev/irnet act as a control channel.
#endif /* DISCOVERY_NOMASK */
self->tx_flow = FLOW_START; /* Flow control from IrTTP */
+ INIT_WORK(&self->disconnect_work, irnet_ppp_disconnect);
+
DEXIT(IRDA_SOCK_TRACE, "\n");
return(0);
}
{
if(test_open)
{
-#ifdef MISSING_PPP_API
- /* ppp_unregister_channel() wants a user context, which we
- * are guaranteed to NOT have here. What are we supposed
- * to do here ? Jean II */
- /* If we were connected, cleanup & close the PPP channel,
- * which will kill pppd (hangup) and the rest */
- ppp_unregister_channel(&self->chan);
- self->ppp_open = 0;
-#endif
+ /* ppp_unregister_channel() wants a user context. */
+ schedule_work(&self->disconnect_work);
}
else
{
/* Not everything should be copied */
new->notify.instance = instance;
+ spin_lock_init(&new->lock);
init_timer(&new->todo_timer);
skb_queue_head_init(&new->rx_queue);
/* NOTREACHED */
}
+static inline int pfkey_mode_from_xfrm(int mode)
+{
+ switch(mode) {
+ case XFRM_MODE_TRANSPORT:
+ return IPSEC_MODE_TRANSPORT;
+ case XFRM_MODE_TUNNEL:
+ return IPSEC_MODE_TUNNEL;
+ case XFRM_MODE_BEET:
+ return IPSEC_MODE_BEET;
+ default:
+ return -1;
+ }
+}
+
+static inline int pfkey_mode_to_xfrm(int mode)
+{
+ switch(mode) {
+ case IPSEC_MODE_ANY: /*XXX*/
+ case IPSEC_MODE_TRANSPORT:
+ return XFRM_MODE_TRANSPORT;
+ case IPSEC_MODE_TUNNEL:
+ return XFRM_MODE_TUNNEL;
+ case IPSEC_MODE_BEET:
+ return XFRM_MODE_BEET;
+ default:
+ return -1;
+ }
+}
+
static struct sk_buff * pfkey_xfrm_state2msg(struct xfrm_state *x, int add_keys, int hsc)
{
struct sk_buff *skb;
int encrypt_key_size = 0;
int sockaddr_size;
struct xfrm_encap_tmpl *natt = NULL;
+ int mode;
/* address family check */
sockaddr_size = pfkey_sockaddr_size(x->props.family);
sa2 = (struct sadb_x_sa2 *) skb_put(skb, sizeof(struct sadb_x_sa2));
sa2->sadb_x_sa2_len = sizeof(struct sadb_x_sa2)/sizeof(uint64_t);
sa2->sadb_x_sa2_exttype = SADB_X_EXT_SA2;
- sa2->sadb_x_sa2_mode = x->props.mode + 1;
+ if ((mode = pfkey_mode_from_xfrm(x->props.mode)) < 0) {
+ kfree_skb(skb);
+ return ERR_PTR(-EINVAL);
+ }
+ sa2->sadb_x_sa2_mode = mode;
sa2->sadb_x_sa2_reserved1 = 0;
sa2->sadb_x_sa2_reserved2 = 0;
sa2->sadb_x_sa2_sequence = 0;
if (ext_hdrs[SADB_X_EXT_SA2-1]) {
struct sadb_x_sa2 *sa2 = (void*)ext_hdrs[SADB_X_EXT_SA2-1];
- x->props.mode = sa2->sadb_x_sa2_mode;
- if (x->props.mode)
- x->props.mode--;
+ int mode = pfkey_mode_to_xfrm(sa2->sadb_x_sa2_mode);
+ if (mode < 0) {
+ err = -EINVAL;
+ goto out;
+ }
+ x->props.mode = mode;
x->props.reqid = sa2->sadb_x_sa2_reqid;
}
struct sadb_address *saddr, *daddr;
struct sadb_msg *out_hdr;
struct xfrm_state *x = NULL;
- u8 mode;
+ int mode;
u32 reqid;
u8 proto;
unsigned short family;
return -EINVAL;
if ((sa2 = ext_hdrs[SADB_X_EXT_SA2-1]) != NULL) {
- mode = sa2->sadb_x_sa2_mode - 1;
+ mode = pfkey_mode_to_xfrm(sa2->sadb_x_sa2_mode);
+ if (mode < 0)
+ return -EINVAL;
reqid = sa2->sadb_x_sa2_reqid;
} else {
mode = 0;
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
struct sockaddr_in6 *sin6;
#endif
+ int mode;
if (xp->xfrm_nr >= XFRM_MAX_DEPTH)
return -ELOOP;
return -EINVAL;
t->id.proto = rq->sadb_x_ipsecrequest_proto; /* XXX check proto */
- t->mode = rq->sadb_x_ipsecrequest_mode-1;
+ if ((mode = pfkey_mode_to_xfrm(rq->sadb_x_ipsecrequest_mode)) < 0)
+ return -EINVAL;
+ t->mode = mode;
if (rq->sadb_x_ipsecrequest_level == IPSEC_LEVEL_USE)
t->optional = 1;
else if (rq->sadb_x_ipsecrequest_level == IPSEC_LEVEL_UNIQUE) {
return skb;
}
-static void pfkey_xfrm_policy2msg(struct sk_buff *skb, struct xfrm_policy *xp, int dir)
+static int pfkey_xfrm_policy2msg(struct sk_buff *skb, struct xfrm_policy *xp, int dir)
{
struct sadb_msg *hdr;
struct sadb_address *addr;
struct sadb_x_ipsecrequest *rq;
struct xfrm_tmpl *t = xp->xfrm_vec + i;
int req_size;
+ int mode;
req_size = sizeof(struct sadb_x_ipsecrequest);
if (t->mode == XFRM_MODE_TUNNEL)
memset(rq, 0, sizeof(*rq));
rq->sadb_x_ipsecrequest_len = req_size;
rq->sadb_x_ipsecrequest_proto = t->id.proto;
- rq->sadb_x_ipsecrequest_mode = t->mode+1;
+ if ((mode = pfkey_mode_from_xfrm(t->mode)) < 0)
+ return -EINVAL;
+ rq->sadb_x_ipsecrequest_mode = mode;
rq->sadb_x_ipsecrequest_level = IPSEC_LEVEL_REQUIRE;
if (t->reqid)
rq->sadb_x_ipsecrequest_level = IPSEC_LEVEL_UNIQUE;
hdr->sadb_msg_len = size / sizeof(uint64_t);
hdr->sadb_msg_reserved = atomic_read(&xp->refcnt);
+
+ return 0;
}
static int key_notify_policy(struct xfrm_policy *xp, int dir, struct km_event *c)
err = PTR_ERR(out_skb);
goto out;
}
- pfkey_xfrm_policy2msg(out_skb, xp, dir);
+ err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
+ if (err < 0)
+ return err;
out_hdr = (struct sadb_msg *) out_skb->data;
out_hdr->sadb_msg_version = PF_KEY_V2;
err = PTR_ERR(out_skb);
goto out;
}
- pfkey_xfrm_policy2msg(out_skb, xp, dir);
+ err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
+ if (err < 0)
+ goto out;
out_hdr = (struct sadb_msg *) out_skb->data;
out_hdr->sadb_msg_version = hdr->sadb_msg_version;
{
int err;
struct sadb_x_ipsecrequest *rq2;
+ int mode;
if (len <= sizeof(struct sadb_x_ipsecrequest) ||
len < rq1->sadb_x_ipsecrequest_len)
return -EINVAL;
m->proto = rq1->sadb_x_ipsecrequest_proto;
- m->mode = rq1->sadb_x_ipsecrequest_mode - 1;
+ if ((mode = pfkey_mode_to_xfrm(rq1->sadb_x_ipsecrequest_mode)) < 0)
+ return -EINVAL;
+ m->mode = mode;
m->reqid = rq1->sadb_x_ipsecrequest_reqid;
return ((int)(rq1->sadb_x_ipsecrequest_len +
struct pfkey_dump_data *data = ptr;
struct sk_buff *out_skb;
struct sadb_msg *out_hdr;
+ int err;
out_skb = pfkey_xfrm_policy2msg_prep(xp);
if (IS_ERR(out_skb))
return PTR_ERR(out_skb);
- pfkey_xfrm_policy2msg(out_skb, xp, dir);
+ err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
+ if (err < 0)
+ return err;
out_hdr = (struct sadb_msg *) out_skb->data;
out_hdr->sadb_msg_version = data->hdr->sadb_msg_version;
for (i = 0, mp = m; i < num_bundles; i++, mp++) {
/* old ipsecrequest */
- if (set_ipsecrequest(skb, mp->proto, mp->mode + 1,
+ int mode = pfkey_mode_from_xfrm(mp->mode);
+ if (mode < 0)
+ return -EINVAL;
+ if (set_ipsecrequest(skb, mp->proto, mode,
(mp->reqid ? IPSEC_LEVEL_UNIQUE : IPSEC_LEVEL_REQUIRE),
mp->reqid, mp->old_family,
&mp->old_saddr, &mp->old_daddr) < 0) {
}
/* new ipsecrequest */
- if (set_ipsecrequest(skb, mp->proto, mp->mode + 1,
+ if (set_ipsecrequest(skb, mp->proto, mode,
(mp->reqid ? IPSEC_LEVEL_UNIQUE : IPSEC_LEVEL_REQUIRE),
mp->reqid, mp->new_family,
&mp->new_saddr, &mp->new_daddr) < 0) {
tristate 'Connection tracking netlink interface (EXPERIMENTAL)'
depends on EXPERIMENTAL && NF_CONNTRACK && NETFILTER_NETLINK
depends on NF_CONNTRACK!=y || NETFILTER_NETLINK!=m
+ depends on NF_NAT=n || NF_NAT
help
This option enables support for a netlink-based userspace interface
return 0;
netlink_remove(sk);
+ sock_orphan(sk);
nlk = nlk_sk(sk);
spin_lock(&nlk->cb_lock);
/* OK. Socket is unlinked, and, therefore,
no new packets will arrive */
- sock_orphan(sk);
sock->sk = NULL;
wake_up_interruptible_all(&nlk->wait);
return -ECONNREFUSED;
}
nlk = nlk_sk(sk);
- /* A dump is in progress... */
+ /* A dump or destruction is in progress... */
spin_lock(&nlk->cb_lock);
- if (nlk->cb) {
+ if (nlk->cb || sock_flag(sk, SOCK_DEAD)) {
spin_unlock(&nlk->cb_lock);
netlink_destroy_callback(cb);
sock_put(sk);
obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o
obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o
obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o
-obj-$(CONFIG_NET_SCH_HPFQ) += sch_hpfq.o
obj-$(CONFIG_NET_SCH_HFSC) += sch_hfsc.o
obj-$(CONFIG_NET_SCH_RED) += sch_red.o
obj-$(CONFIG_NET_SCH_GRED) += sch_gred.o
skb2->tc_verd = SET_TC_FROM(skb2->tc_verd, at);
skb2->dev = dev;
- skb2->input_dev = skb->dev;
+ skb2->iif = skb->dev->ifindex;
dev_queue_xmit(skb2);
spin_unlock(&m->tcf_lock);
return m->tcf_action;
static int basic_init(struct tcf_proto *tp)
{
+ struct basic_head *head;
+
+ head = kzalloc(sizeof(*head), GFP_KERNEL);
+ if (head == NULL)
+ return -ENOBUFS;
+ INIT_LIST_HEAD(&head->flist);
+ tp->root = head;
return 0;
}
list_del(&f->link);
basic_delete_filter(tp, f);
}
+ kfree(head);
}
static int basic_delete(struct tcf_proto *tp, unsigned long arg)
}
err = -ENOBUFS;
- if (head == NULL) {
- head = kzalloc(sizeof(*head), GFP_KERNEL);
- if (head == NULL)
- goto errout;
-
- INIT_LIST_HEAD(&head->flist);
- tp->root = head;
- }
-
f = kzalloc(sizeof(*f), GFP_KERNEL);
if (f == NULL)
goto errout;
spin_unlock_bh(&dev->queue_lock);
}
-static void __inline__
+static inline void
route4_set_fastmap(struct route4_head *head, u32 id, int iif,
struct route4_filter *f)
{
}
if (tb[TCA_TCINDEX_SHIFT-1]) {
- if (RTA_PAYLOAD(tb[TCA_TCINDEX_SHIFT-1]) < sizeof(u16))
+ if (RTA_PAYLOAD(tb[TCA_TCINDEX_SHIFT-1]) < sizeof(int))
goto errout;
- cp.shift = *(u16 *) RTA_DATA(tb[TCA_TCINDEX_SHIFT-1]);
+ cp.shift = *(int *) RTA_DATA(tb[TCA_TCINDEX_SHIFT-1]);
}
err = -EBUSY;
sch_tree_lock(sch);
- list_del(&cl->hlist);
list_del(&cl->siblings);
hfsc_adjust_levels(cl->cl_parent);
+
hfsc_purge_queue(sch, cl);
+ list_del(&cl->hlist);
+
if (--cl->refcnt == 0)
hfsc_destroy_class(sch, cl);
sch_tree_lock(sch);
- /* delete from hash and active; remainder in destroy_class */
- hlist_del_init(&cl->hlist);
-
if (!cl->level) {
qlen = cl->un.leaf.q->q.qlen;
qdisc_reset(cl->un.leaf.q);
qdisc_tree_decrease_qlen(cl->un.leaf.q, qlen);
}
+ /* delete from hash and active; remainder in destroy_class */
+ hlist_del_init(&cl->hlist);
+
if (cl->prio_activity)
htb_deactivate(q, cl);
trans = list_entry(pos, struct sctp_transport, transports);
if (!sctp_assoc_lookup_paddr(new, &trans->ipaddr))
sctp_assoc_del_peer(asoc, &trans->ipaddr);
+
+ if (asoc->state >= SCTP_STATE_ESTABLISHED)
+ sctp_transport_reset(trans);
}
/* If the case is A (association restart), use
*/
sctp_ssnmap_clear(asoc->ssnmap);
+ /* Flush the ULP reassembly and ordered queue.
+ * Any data there will now be stale and will
+ * cause problems.
+ */
+ sctp_ulpq_flush(&asoc->ulpq);
+
+ /* reset the overall association error count so
+ * that the restarted association doesn't get torn
+ * down on the next retransmission timer.
+ */
+ asoc->overall_error_count = 0;
+
} else {
/* Add any peer addresses from the new association. */
list_for_each(pos, &new->peer.transport_addr_list) {
void *arg,
sctp_cmd_seq_t *commands)
{
- return sctp_sf_heartbeat(ep, asoc, type, (struct sctp_transport *)arg,
- commands);
+ if (SCTP_DISPOSITION_NOMEM == sctp_sf_heartbeat(ep, asoc, type,
+ (struct sctp_transport *)arg, commands))
+ return SCTP_DISPOSITION_NOMEM;
+
+ /*
+ * RFC 2960 (bis), section 8.3
+ *
+ * D) Request an on-demand HEARTBEAT on a specific destination
+ * transport address of a given association.
+ *
+ * The endpoint should increment the respective error counter of
+ * the destination transport address each time a HEARTBEAT is sent
+ * to that address and not acknowledged within one RTO.
+ *
+ */
+ sctp_add_cmd_sf(commands, SCTP_CMD_TRANSPORT_RESET,
+ SCTP_TRANSPORT(arg));
+ return SCTP_DISPOSITION_CONSUME;
}
/*
retval = -EINVAL;
goto err_bindx_rem;
}
+
+ if (!af->addr_valid(sa_addr, sp, NULL)) {
+ retval = -EADDRNOTAVAIL;
+ goto err_bindx_rem;
+ }
+
if (sa_addr->v4.sin_port != htons(bp->port)) {
retval = -EINVAL;
goto err_bindx_rem;
finish_wait(sk->sk_sleep, &wait);
}
+static void sctp_sock_rfree_frag(struct sk_buff *skb)
+{
+ struct sk_buff *frag;
+
+ if (!skb->data_len)
+ goto done;
+
+ /* Don't forget the fragments. */
+ for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next)
+ sctp_sock_rfree_frag(frag);
+
+done:
+ sctp_sock_rfree(skb);
+}
+
+static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
+{
+ struct sk_buff *frag;
+
+ if (!skb->data_len)
+ goto done;
+
+ /* Don't forget the fragments. */
+ for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next)
+ sctp_skb_set_owner_r_frag(frag, sk);
+
+done:
+ sctp_skb_set_owner_r(skb, sk);
+}
+
/* Populate the fields of the newsk from the oldsk and migrate the assoc
* and its messages to the newsk.
*/
sctp_skb_for_each(skb, &oldsk->sk_receive_queue, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
- sctp_sock_rfree(skb);
+ sctp_sock_rfree_frag(skb);
__skb_unlink(skb, &oldsk->sk_receive_queue);
__skb_queue_tail(&newsk->sk_receive_queue, skb);
- sctp_skb_set_owner_r(skb, newsk);
+ sctp_skb_set_owner_r_frag(skb, newsk);
}
}
sctp_skb_for_each(skb, &oldsp->pd_lobby, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
- sctp_sock_rfree(skb);
+ sctp_sock_rfree_frag(skb);
__skb_unlink(skb, &oldsp->pd_lobby);
__skb_queue_tail(queue, skb);
- sctp_skb_set_owner_r(skb, newsk);
+ sctp_skb_set_owner_r_frag(skb, newsk);
}
}
}
+ sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp) {
+ sctp_sock_rfree_frag(skb);
+ sctp_skb_set_owner_r_frag(skb, newsk);
+ }
+
+ sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp) {
+ sctp_sock_rfree_frag(skb);
+ sctp_skb_set_owner_r_frag(skb, newsk);
+ }
+
/* Set the type of socket to indicate that it is peeled off from the
* original UDP-style socket or created with the accept() call on a
* TCP-style socket..
timeout += jiffies;
return timeout;
}
+
+/* Reset transport variables to their initial values */
+void sctp_transport_reset(struct sctp_transport *t)
+{
+ struct sctp_association *asoc = t->asoc;
+
+ /* RFC 2960 (bis), Section 5.2.4
+ * All the congestion control parameters (e.g., cwnd, ssthresh)
+ * related to this peer MUST be reset to their initial values
+ * (see Section 6.2.1)
+ */
+ t->cwnd = min(4*asoc->pathmtu, max_t(__u32, 2*asoc->pathmtu, 4380));
+ t->ssthresh = asoc->peer.i.a_rwnd;
+ t->rto = asoc->rto_initial;
+ t->rtt = 0;
+ t->srtt = 0;
+ t->rttvar = 0;
+
+ /* Reset these additional varibles so that we have a clean
+ * slate.
+ */
+ t->partial_bytes_acked = 0;
+ t->flight_size = 0;
+ t->error_count = 0;
+ t->rto_pending = 0;
+
+ /* Initialize the state information for SFR-CACC */
+ t->cacc.changeover_active = 0;
+ t->cacc.cycling_changeover = 0;
+ t->cacc.next_tsn_at_change = 0;
+ t->cacc.cacc_saw_newack = 0;
+}
/* Flush the reassembly and ordering queues. */
-static void sctp_ulpq_flush(struct sctp_ulpq *ulpq)
+void sctp_ulpq_flush(struct sctp_ulpq *ulpq)
{
struct sk_buff *skb;
struct sctp_ulpevent *event;
if (!sctp_sk(sk)->pd_mode) {
queue = &sk->sk_receive_queue;
} else if (ulpq->pd_mode) {
- if (event->msg_flags & MSG_NOTIFICATION)
+ /* If the association is in partial delivery, we
+ * need to finish delivering the partially processed
+ * packet before passing any other data. This is
+ * because we don't truly support stream interleaving.
+ */
+ if ((event->msg_flags & MSG_NOTIFICATION) ||
+ (SCTP_DATA_NOT_FRAG ==
+ (event->msg_flags & SCTP_DATA_FRAG_MASK)))
queue = &sctp_sk(sk)->pd_lobby;
else {
clear_pd = event->msg_flags & MSG_EOR;
err = sock_attach_fd(newsock, newfile);
if (err < 0)
- goto out_fd;
+ goto out_fd_simple;
err = security_socket_accept(sock, newsock);
if (err)
fput_light(sock->file, fput_needed);
out:
return err;
+out_fd_simple:
+ sock_release(newsock);
+ put_filp(newfile);
+ put_unused_fd(newfd);
+ goto out_put;
out_fd:
fput(newfile);
put_unused_fd(newfd);
rpc_delay(task, 3*HZ);
case -ETIMEDOUT:
task->tk_action = call_timeout;
+ if (task->tk_client->cl_discrtry)
+ xprt_disconnect(task->tk_xprt);
break;
case -ECONNREFUSED:
case -ENOTCONN:
out_retry:
req->rq_received = req->rq_private_buf.len = 0;
task->tk_status = 0;
+ if (task->tk_client->cl_discrtry)
+ xprt_disconnect(task->tk_xprt);
}
/*
static inline struct ip_map *
ip_map_cached_get(struct svc_rqst *rqstp)
{
- struct ip_map *ipm = rqstp->rq_sock->sk_info_authunix;
+ struct ip_map *ipm;
+ struct svc_sock *svsk = rqstp->rq_sock;
+ spin_lock_bh(&svsk->sk_defer_lock);
+ ipm = svsk->sk_info_authunix;
if (ipm != NULL) {
if (!cache_valid(&ipm->h)) {
/*
* remembered, e.g. by a second mount from the
* same IP address.
*/
- rqstp->rq_sock->sk_info_authunix = NULL;
+ svsk->sk_info_authunix = NULL;
+ spin_unlock_bh(&svsk->sk_defer_lock);
cache_put(&ipm->h, &ip_map_cache);
return NULL;
}
cache_get(&ipm->h);
}
+ spin_unlock_bh(&svsk->sk_defer_lock);
return ipm;
}
{
struct svc_sock *svsk = rqstp->rq_sock;
- if (svsk->sk_sock->type == SOCK_STREAM && svsk->sk_info_authunix == NULL)
- svsk->sk_info_authunix = ipm; /* newly cached, keep the reference */
- else
+ spin_lock_bh(&svsk->sk_defer_lock);
+ if (svsk->sk_sock->type == SOCK_STREAM &&
+ svsk->sk_info_authunix == NULL) {
+ /* newly cached, keep the reference */
+ svsk->sk_info_authunix = ipm;
+ ipm = NULL;
+ }
+ spin_unlock_bh(&svsk->sk_defer_lock);
+ if (ipm)
cache_put(&ipm->h, &ip_map_cache);
}
struct in_pktinfo pkti;
struct in6_pktinfo pkti6;
};
+#define SVC_PKTINFO_SPACE \
+ CMSG_SPACE(sizeof(union svc_pktinfo_u))
static void svc_set_cmsg_data(struct svc_rqst *rqstp, struct cmsghdr *cmh)
{
struct svc_sock *svsk = rqstp->rq_sock;
struct socket *sock = svsk->sk_sock;
int slen;
- char buffer[CMSG_SPACE(sizeof(union svc_pktinfo_u))];
- struct cmsghdr *cmh = (struct cmsghdr *)buffer;
+ union {
+ struct cmsghdr hdr;
+ long all[SVC_PKTINFO_SPACE / sizeof(long)];
+ } buffer;
+ struct cmsghdr *cmh = &buffer.hdr;
int len = 0;
int result;
int size;
struct svc_sock *svsk = rqstp->rq_sock;
struct svc_serv *serv = svsk->sk_server;
struct sk_buff *skb;
- char buffer[CMSG_SPACE(sizeof(union svc_pktinfo_u))];
- struct cmsghdr *cmh = (struct cmsghdr *)buffer;
+ union {
+ struct cmsghdr hdr;
+ long all[SVC_PKTINFO_SPACE / sizeof(long)];
+ } buffer;
+ struct cmsghdr *cmh = &buffer.hdr;
int err, len;
struct msghdr msg = {
.msg_name = svc_addr(rqstp),
}
clear_bit(SK_DATA, &svsk->sk_flags);
- while ((err == kernel_recvmsg(svsk->sk_sock, &msg, NULL,
- 0, 0, MSG_PEEK | MSG_DONTWAIT)) < 0 ||
+ while ((err = kernel_recvmsg(svsk->sk_sock, &msg, NULL,
+ 0, 0, MSG_PEEK | MSG_DONTWAIT)) < 0 ||
(skb = skb_recv_datagram(svsk->sk_sk, 0, 1, &err)) == NULL) {
if (err == -EAGAIN) {
svc_sock_received(svsk);
xprt_reset_majortimeo(req);
/* Turn off autodisconnect */
del_singleshot_timer_sync(&xprt->timer);
- } else {
- /* If all request bytes have been sent,
- * then we must be retransmitting this one */
- if (!req->rq_bytes_sent) {
- if (task->tk_client->cl_discrtry) {
- xprt_disconnect(xprt);
- task->tk_status = -ENOTCONN;
- return;
- }
- }
}
} else if (!req->rq_bytes_sent)
return;
short same_lci = 0;
int rc = 0;
- if ((rt = x25_get_route(dest_addr)) != NULL) {
+ if ((rt = x25_get_route(dest_addr)) == NULL)
+ goto out_no_route;
- if ((neigh_new = x25_get_neigh(rt->dev)) == NULL) {
- /* This shouldnt happen, if it occurs somehow
- * do something sensible
- */
- goto out_put_route;
- }
-
- /* Avoid a loop. This is the normal exit path for a
- * system with only one x.25 iface and default route
+ if ((neigh_new = x25_get_neigh(rt->dev)) == NULL) {
+ /* This shouldnt happen, if it occurs somehow
+ * do something sensible
*/
- if (rt->dev == from->dev) {
- goto out_put_nb;
- }
+ goto out_put_route;
+ }
- /* Remote end sending a call request on an already
- * established LCI? It shouldnt happen, just in case..
- */
- read_lock_bh(&x25_forward_list_lock);
- list_for_each(entry, &x25_forward_list) {
- x25_frwd = list_entry(entry, struct x25_forward, node);
- if (x25_frwd->lci == lci) {
- printk(KERN_WARNING "X.25: call request for lci which is already registered!, transmitting but not registering new pair\n");
- same_lci = 1;
- }
- }
- read_unlock_bh(&x25_forward_list_lock);
-
- /* Save the forwarding details for future traffic */
- if (!same_lci){
- if ((new_frwd = kmalloc(sizeof(struct x25_forward),
- GFP_ATOMIC)) == NULL){
- rc = -ENOMEM;
- goto out_put_nb;
- }
- new_frwd->lci = lci;
- new_frwd->dev1 = rt->dev;
- new_frwd->dev2 = from->dev;
- write_lock_bh(&x25_forward_list_lock);
- list_add(&new_frwd->node, &x25_forward_list);
- write_unlock_bh(&x25_forward_list_lock);
+ /* Avoid a loop. This is the normal exit path for a
+ * system with only one x.25 iface and default route
+ */
+ if (rt->dev == from->dev) {
+ goto out_put_nb;
+ }
+
+ /* Remote end sending a call request on an already
+ * established LCI? It shouldnt happen, just in case..
+ */
+ read_lock_bh(&x25_forward_list_lock);
+ list_for_each(entry, &x25_forward_list) {
+ x25_frwd = list_entry(entry, struct x25_forward, node);
+ if (x25_frwd->lci == lci) {
+ printk(KERN_WARNING "X.25: call request for lci which is already registered!, transmitting but not registering new pair\n");
+ same_lci = 1;
}
+ }
+ read_unlock_bh(&x25_forward_list_lock);
- /* Forward the call request */
- if ( (skbn = skb_clone(skb, GFP_ATOMIC)) == NULL){
+ /* Save the forwarding details for future traffic */
+ if (!same_lci){
+ if ((new_frwd = kmalloc(sizeof(struct x25_forward),
+ GFP_ATOMIC)) == NULL){
+ rc = -ENOMEM;
goto out_put_nb;
}
- x25_transmit_link(skbn, neigh_new);
- rc = 1;
+ new_frwd->lci = lci;
+ new_frwd->dev1 = rt->dev;
+ new_frwd->dev2 = from->dev;
+ write_lock_bh(&x25_forward_list_lock);
+ list_add(&new_frwd->node, &x25_forward_list);
+ write_unlock_bh(&x25_forward_list_lock);
}
+ /* Forward the call request */
+ if ( (skbn = skb_clone(skb, GFP_ATOMIC)) == NULL){
+ goto out_put_nb;
+ }
+ x25_transmit_link(skbn, neigh_new);
+ rc = 1;
+
out_put_nb:
x25_neigh_put(neigh_new);
out_put_route:
x25_route_put(rt);
+
+out_no_route:
return rc;
}
sizeof(struct in6_addr));
}
audit_log_format(audit_buf,
- " src=" NIP6_FMT "dst=" NIP6_FMT,
+ " src=" NIP6_FMT " dst=" NIP6_FMT,
NIP6(saddr6), NIP6(daddr6));
}
break;
return 0;
diff = x->replay.seq - seq;
- if (diff >= x->props.replay_window) {
+ if (diff >= min_t(unsigned int, x->props.replay_window,
+ sizeof(x->replay.bitmap) * 8)) {
x->stats.replay_window++;
return -EINVAL;
}
}
-static inline int xfrm_user_sec_ctx_size(struct xfrm_policy *xp)
+static inline int xfrm_user_sec_ctx_size(struct xfrm_sec_ctx *xfrm_ctx)
{
- struct xfrm_sec_ctx *xfrm_ctx = xp->security;
int len = 0;
if (xfrm_ctx) {
return -1;
}
-static int inline xfrm_sa_len(struct xfrm_state *x)
+static inline int xfrm_sa_len(struct xfrm_state *x)
{
int l = 0;
if (x->aalg)
len = RTA_SPACE(sizeof(struct xfrm_user_tmpl) * xp->xfrm_nr);
len += NLMSG_SPACE(sizeof(struct xfrm_user_acquire));
- len += RTA_SPACE(xfrm_user_sec_ctx_size(xp));
+ len += RTA_SPACE(xfrm_user_sec_ctx_size(x->security));
#ifdef CONFIG_XFRM_SUB_POLICY
len += RTA_SPACE(sizeof(struct xfrm_userpolicy_type));
#endif
len = RTA_SPACE(sizeof(struct xfrm_user_tmpl) * xp->xfrm_nr);
len += NLMSG_SPACE(sizeof(struct xfrm_user_polexpire));
- len += RTA_SPACE(xfrm_user_sec_ctx_size(xp));
+ len += RTA_SPACE(xfrm_user_sec_ctx_size(xp->security));
#ifdef CONFIG_XFRM_SUB_POLICY
len += RTA_SPACE(sizeof(struct xfrm_userpolicy_type));
#endif
* the dependency on linux/autoconf.h by a dependency on every config
* option which is mentioned in any of the listed prequisites.
*
- * To be exact, split-include populates a tree in include/config/,
- * e.g. include/config/his/driver.h, which contains the #define/#undef
- * for the CONFIG_HIS_DRIVER option.
+ * kconfig populates a tree in include/config/ with an empty file
+ * for each config symbol and when the configuration is updated
+ * the files representing changed config options are touched
+ * which then let make pick up the changes and the files that use
+ * the config symbols are rebuilt.
*
* So if the user changes his CONFIG_HIS_DRIVER option, only the objects
* which depend on "include/linux/config/his/driver.h" will be rebuilt,
continue;
found:
+ if (!memcmp(q - 7, "_MODULE", 7))
+ q -= 7;
use_config(p+7, q-p-7);
}
}
git.openpandora.org / pandora-kernel.git / commitdiff