Convert CONFIG_BAUDRATE to Kconfig

This converts the following to Kconfig:
   CONFIG_BAUDRATE

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/README b/README
index 4367ac3..a5aee86 100644 (file)
--- a/README
+++ b/README
@@ -670,11 +670,6 @@ The following options need to be configured:
                Define this variable to enable hw flow control in serial driver.
                Current user of this option is drivers/serial/nsl16550.c driver
 
-- Console Baudrate:
-               CONFIG_BAUDRATE - in bps
-               Select one of the baudrates listed in
-               CONFIG_SYS_BAUDRATE_TABLE, see below.
-
 - Autoboot Command:
                CONFIG_BOOTCOMMAND
                Only needed when CONFIG_BOOTDELAY is enabled;

diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index 08d34db..6dad821 100644 (file)
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -103,9 +103,6 @@
 #define PHYS_SDRAM_1_SIZE              SZ_2G           /* 2 GB */
 #define PHYS_SDRAM_2_SIZE              SZ_2G           /* 2 GB */
 
-/* Serial */
-#define CONFIG_BAUDRATE                        115200
-
 /* Monitor Command Prompt */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_CBSIZE              SZ_2K

diff --git a/include/configs/bcm_northstar2.h b/include/configs/bcm_northstar2.h
index 45dc7b2..fbfab28 100644 (file)
--- a/include/configs/bcm_northstar2.h
+++ b/include/configs/bcm_northstar2.h
@@ -31,7 +31,6 @@
 #define CONFIG_SYS_NS16550_COM2                        0x66110000
 #define CONFIG_SYS_NS16550_COM3                        0x66120000
 #define CONFIG_SYS_NS16550_COM4                        0x66130000
-#define CONFIG_BAUDRATE                                115200
 
 /* console configuration */
 #define CONFIG_SYS_CBSIZE                      SZ_1K

diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h
index 24569f7..01cfed0 100644 (file)
--- a/include/configs/bcmstb.h
+++ b/include/configs/bcmstb.h
@@ -115,7 +115,6 @@ extern phys_addr_t prior_stage_fdt_address;
 /*
  * Serial console configuration.
  */
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600, \
                                         115200}
 

diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 7d00707..8d72229 100644 (file)
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -135,9 +135,6 @@
 #define PHYS_SDRAM_1_SIZE              SZ_2G           /* 2 GB */
 #define PHYS_SDRAM_2_SIZE              0x00000000      /* 0 GB */
 
-/* Serial */
-#define CONFIG_BAUDRATE                        115200
-
 /* Monitor Command Prompt */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_CBSIZE              SZ_2K

diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index 00e5c8f..0c36ea6 100644 (file)
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -112,8 +112,6 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_HOSTNAME                "ccdc"
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
 #define CONFIG_BOOTFILE                "ccdc.img"

diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 5bfdf40..0b6617f 100644 (file)
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -62,7 +62,6 @@
 /* UART */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
-#define CONFIG_BAUDRATE                        115200
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB

diff --git a/include/configs/display5.h b/include/configs/display5.h
index 3348ecc..94baa65 100644 (file)
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -66,7 +66,6 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE                        115200
 
 #ifndef CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \

diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h
index 001e9d3..bde168d 100644 (file)
--- a/include/configs/grpeach.h
+++ b/include/configs/grpeach.h
@@ -11,9 +11,6 @@
 /* Board Clock , P1 clock frequency (XTAL=13.33MHz) */
 #define CONFIG_SYS_CLK_FREQ    66666666
 
-/* Serial Console */
-#define CONFIG_BAUDRATE                115200
-
 /* Miscellaneous */
 #define CONFIG_SYS_PBSIZE      256
 #define CONFIG_CMDLINE_TAG

diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index f71efd4..33a3014 100644 (file)
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -175,8 +175,6 @@
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE                        0xC0000000 /* 3GB DDR */
 
-#define CONFIG_BAUDRATE                        115200
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
 

diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index 8324767..fd68c4f 100644 (file)
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -175,9 +175,6 @@
 #define PHYS_SDRAM_1_SIZE              0x80000000      /* 2 GB */
 #define PHYS_SDRAM_2_SIZE              0x100000000     /* 4 GB */
 
-/* Serial */
-#define CONFIG_BAUDRATE                        115200
-
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              8000000 /* 8MHz */
 

diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h
index 89d7ada..9808e72 100644 (file)
--- a/include/configs/imx8qm_rom7720.h
+++ b/include/configs/imx8qm_rom7720.h
@@ -163,9 +163,6 @@
 /* LPDDR4 board total DDR is 6GB, DDR4 board total DDR is 4 GB */
 #define PHYS_SDRAM_2_SIZE              0x80000000      /* 2 GB */
 
-/* Serial */
-#define CONFIG_BAUDRATE                        115200
-
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              8000000 /* 8MHz */
 

diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index a58f68c..b442b48 100644 (file)
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -175,9 +175,6 @@
 /* LPDDR4 board total DDR is 3GB */
 #define PHYS_SDRAM_2_SIZE              0x40000000      /* 1 GB */
 
-/* Serial */
-#define CONFIG_BAUDRATE                        115200
-
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              8000000 /* 8MHz */
 

diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 46c60aa..ec2ed7c 100644 (file)
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -104,8 +104,6 @@
 #endif
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 
-#define CONFIG_BAUDRATE                        115200
-
 /* I2C */
 #ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index f9040e6..44f2dc8 100644 (file)
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -48,7 +48,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* Miscellaneous configurable options */

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 596f14b..3ea1675 100644 (file)
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -64,7 +64,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 #if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS)

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 5ab9244..a8636d3 100644 (file)
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -78,7 +78,6 @@
                                        (void *)CONFIG_SYS_SERIAL1, \
                                        (void *)CONFIG_SYS_SERIAL2, \
                                        (void *)CONFIG_SYS_SERIAL3 }
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* MC firmware */

diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index bb6d82d..2ee6661 100644 (file)
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -33,7 +33,6 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE                        115200
 
 /* Command definition */
 

diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h
index b774b16..0a28d61 100644 (file)
--- a/include/configs/mx6memcal.h
+++ b/include/configs/mx6memcal.h
@@ -27,7 +27,6 @@
 #else
 #error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx)
 #endif
-#define CONFIG_BAUDRATE                        115200
 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16)
 

diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
index 942b7dd..5e05b8c 100644 (file)
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@@ -39,7 +39,6 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE                        115200
 
 #define CONFIG_SYS_CACHELINE_SIZE      64
 

diff --git a/include/configs/owl-common.h b/include/configs/owl-common.h
index f77a5fa..98b5a96 100644 (file)
--- a/include/configs/owl-common.h
+++ b/include/configs/owl-common.h
@@ -29,9 +29,6 @@
  */
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_TEXT_BASE + 0x7ff00)
 
-/* UART Definitions */
-#define CONFIG_BAUDRATE                        115200
-
 /* Console configuration */
 #define CONFIG_SYS_CBSIZE              1024    /* Console buffer size */
 #define CONFIG_SYS_MAXARGS             64

diff --git a/include/configs/pdu001.h b/include/configs/pdu001.h
index d524f3c..e4b14c5 100644 (file)
--- a/include/configs/pdu001.h
+++ b/include/configs/pdu001.h
@@ -73,6 +73,5 @@
 #define CONFIG_SYS_NS16550_COM4        UART3_BASE
 #define CONFIG_SYS_NS16550_COM5        UART4_BASE
 #define CONFIG_SYS_NS16550_COM6        UART5_BASE
-#define CONFIG_BAUDRATE                115200
 
 #endif /* ! __CONFIG_PDU001_H */

diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 2ae13b3..7b7d633 100644 (file)
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -150,8 +150,6 @@
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
                                        (PHYS_SDRAM_SIZE >> 1))
 
-#define CONFIG_BAUDRATE                        115200
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
 

diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h
index 51177f4..34235b5 100644 (file)
--- a/include/configs/presidio_asic.h
+++ b/include/configs/presidio_asic.h
@@ -41,7 +41,6 @@
 #define CORTINA_SERIAL_PORTS           {(void *)CONFIG_SYS_SERIAL0, \
                                         (void *)CONFIG_SYS_SERIAL1}
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_SERIAL0             PER_UART0_CFG
 #define CONFIG_SYS_SERIAL1             PER_UART1_CFG
 

diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h
index d0c9e5c..8f1d508 100644 (file)
--- a/include/configs/rk3128_common.h
+++ b/include/configs/rk3128_common.h
@@ -9,7 +9,6 @@
 #include "rockchip-common.h"
 
 #define CONFIG_SYS_MAXARGS             16
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_CBSIZE              1024
 #define CONFIG_SKIP_LOWLEVEL_INIT
 

diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h
index e57d0ef..f178a06 100644 (file)
--- a/include/configs/rk3368_common.h
+++ b/include/configs/rk3368_common.h
@@ -15,7 +15,6 @@
 
 #define CONFIG_SYS_SDRAM_BASE          0
 #define SDRAM_MAX_SIZE                 0xff000000
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_CBSIZE              1024
 #define CONFIG_SKIP_LOWLEVEL_INIT
 

diff --git a/include/configs/wb50n.h b/include/configs/wb50n.h
index c211276..a210449 100644 (file)
--- a/include/configs/wb50n.h
+++ b/include/configs/wb50n.h
@@ -72,8 +72,6 @@
 #define CONFIG_BOOTARGS \
     "rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
 
-#define CONFIG_BAUDRATE             115200
-
 #define CONFIG_SYS_CBSIZE           1024
 #define CONFIG_SYS_MAXARGS          16
 #define CONFIG_SYS_PBSIZE \