*as openssh 5.2p is similar(they worked with the same recipe) to openssh-4.6p1 they now(for openssh-4.6p1) depend on a common openssh.inc
checksums will be commited soon
--- /dev/null
+Index: openssh-5.2p1/Makefile.in
+===================================================================
+--- openssh-5.2p1.orig/Makefile.in
++++ openssh-5.2p1/Makefile.in
+@@ -158,7 +158,7 @@ ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libss
+ $(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS)
+
+ sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o sftp-server-main.o
+- $(LD) -o $@ sftp-server.o sftp-common.o sftp-server-main.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS)
++ $(LD) -o $@ sftp-server.o sftp-common.o sftp-server-main.o $(LDFLAGS) -lssh -lopenbsd-compat
+
+ sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-common.o sftp-glob.o progressmeter.o
+ $(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(LIBEDIT)
--- /dev/null
+# $OpenBSD: ssh_config,v 1.25 2009/02/17 01:28:32 djm Exp $
+
+# This is the ssh client system-wide configuration file. See
+# ssh_config(5) for more information. This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+# 1. command line options
+# 2. user-specific file
+# 3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options. For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+Host *
+ ForwardAgent yes
+ ForwardX11 yes
+# RhostsRSAAuthentication no
+# RSAAuthentication yes
+# PasswordAuthentication yes
+# HostbasedAuthentication no
+# GSSAPIAuthentication no
+# GSSAPIDelegateCredentials no
+# BatchMode no
+# CheckHostIP yes
+# AddressFamily any
+# ConnectTimeout 0
+# StrictHostKeyChecking ask
+# IdentityFile ~/.ssh/identity
+# IdentityFile ~/.ssh/id_rsa
+# IdentityFile ~/.ssh/id_dsa
+# Port 22
+# Protocol 2,1
+# Cipher 3des
+# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
+# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160
+# EscapeChar ~
+# Tunnel no
+# TunnelDevice any:any
+# PermitLocalCommand no
+# VisualHostKey no
--- /dev/null
+# $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $
+
+# This is the sshd server system-wide configuration file. See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options change a
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# Disable legacy (protocol version 1) support in the server for new
+# installations. In future the default will change to require explicit
+# activation of protocol 1
+Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+#UsePAM no
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+Compression no
+ClientAliveInterval 15
+ClientAliveCountMax 4
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem sftp /usr/libexec/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+# X11Forwarding no
+# AllowTcpForwarding no
+# ForceCommand cvs server
--- /dev/null
+DEPENDS = "zlib openssl"
+
+RCONFLICTS_openssh = "dropbear"
+RCONFLICTS_openssh-sshd = "dropbear"
+
+SECTION = "console/network"
+DESCRIPTION = "Secure rlogin/rsh/rcp/telnet replacement (OpenSSH) \
+Ssh (Secure Shell) is a program for logging into a remote machine \
+and for executing commands on a remote machine. \
+It provides secure encrypted communications between two untrusted \
+hosts over an insecure network. X11 connections and arbitrary TCP/IP \
+ports can also be forwarded over the secure channel. \
+It is intended as a replacement for rlogin, rsh and rcp, and can be \
+used to provide applications with a secure communication channel."
+HOMEPAGE = "http://www.openssh.org/"
+LICENSE = "BSD"
+
+inherit autotools
+
+export ASKPASS_PROGRAM = "${bindir}/ssh-askpass"
+export LD = "${CC}"
+CFLAGS_prepend = "-I${S} "
+CFLAGS_append = " -D__FILE_OFFSET_BITS=64"
+LDFLAGS_prepend = "-L${S} -L${S}/openbsd-compat "
+EXTRA_OECONF = "--disable-suid-ssh --with-ssl=${STAGING_LIBDIR}/ssl \
+ --with-rand-helper=no --without-pam \
+ --without-zlib-version-check \
+ --with-privsep-path=/var/run/sshd \
+ --sysconfdir=${sysconfdir}/ssh \
+ --with-xauth=/usr/bin/xauth"
+
+EXTRA_OEMAKE = "'STRIP_OPT='"
+
+do_configure_prepend () {
+ if [ ! -e acinclude.m4 -a -e aclocal.m4 ]; then
+ cp aclocal.m4 acinclude.m4
+ fi
+}
+
+do_compile_append () {
+ install -m 0644 ${WORKDIR}/sshd_config ${S}/
+ install -m 0644 ${WORKDIR}/ssh_config ${S}/
+}
+
+do_install_append() {
+ install -d ${D}${sysconfdir}/init.d
+ install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/sshd
+ mv ${D}${bindir}/scp ${D}${bindir}/scp.openssh
+ mv ${D}${bindir}/ssh ${D}${bindir}/ssh.openssh
+ rmdir ${D}/var/run/sshd ${D}/var/run ${D}/var
+}
+
+PACKAGES =+ " ssh-keygen openssh-scp openssh-ssh openssh-sshd openssh-sftp openssh-misc openssh-sftp-server"
+FILES_openssh-dbg +=${bindir}/.debug ${libdir}exec/.debug"
+FILES_openssh-scp = "${bindir}/scp.${PN}"
+FILES_openssh-ssh = "${bindir}/ssh.${PN} ${bindir}/slogin /${sysconfdir}/ssh/ssh_config"
+FILES_openssh-sshd = "${sbindir}/sshd /${sysconfdir}/init.d/sshd"
+FILES_openssh-sshd += " /${sysconfdir}/ssh/moduli /${sysconfdir}/ssh/sshd_config"
+FILES_openssh-sftp = "${bindir}/sftp"
+FILES_openssh-sftp-server = "${libdir}exec/sftp-server"
+FILES_openssh-misc = "${bindir}/ssh* ${libdir}exec/ssh*"
+FILES_ssh-keygen = "${bindir}/ssh-keygen"
+
+RDEPENDS_openssh += " openssh-scp openssh-ssh openssh-sshd ssh-keygen "
+DEPENDS_openssh-sshd += " update-rc.d"
+RDEPENDS_openssh-sshd += " update-rc.d ssh-keygen "
+
+pkg_postinst_openssh-sshd() {
+if test "x$D" != "x"; then
+ exit 1
+else
+ addgroup sshd
+ adduser --system --home /var/run/sshd --no-create-home --disabled-password --ingroup sshd -s /bin/false sshd
+ update-rc.d sshd defaults 9
+fi
+}
+
+pkg_postinst_openssh-scp() {
+ update-alternatives --install ${bindir}/scp scp scp.${PN} 90
+}
+
+pkg_postinst_openssh-ssh() {
+ update-alternatives --install ${bindir}/ssh ssh ssh.${PN} 90
+}
+
+pkg_postrm_openssh-ssh() {
+ update-alternatives --remove ${bindir}/ssh ssh.${PN}
+}
+
+pkg_postrm_openssh-scp() {
+ update-alternatives --remove ${bindir}/scp scp.${PN}
+}
+
+pkg_postrm_openssh-sshd() {
+if test "x$D" != "x"; then
+ exit 1
+else
+ ${sysconfdir}/init.d/sshd stop
+ deluser sshd
+ delgroup sshd
+ update-rc.d -f sshd remove
+fi
+}
+
+CONFFILES_openssh-sshd = "${sysconfdir}/ssh/sshd_config"
+CONFFILES_openssh-ssh = "${sysconfdir}/ssh/ssh_config"
-DEPENDS = "zlib openssl"
-
-RCONFLICTS_openssh = "dropbear"
-RCONFLICTS_openssh-sshd = "dropbear"
-
-SECTION = "console/network"
-DESCRIPTION = "Secure rlogin/rsh/rcp/telnet replacement (OpenSSH) \
-Ssh (Secure Shell) is a program for logging into a remote machine \
-and for executing commands on a remote machine. \
-It provides secure encrypted communications between two untrusted \
-hosts over an insecure network. X11 connections and arbitrary TCP/IP \
-ports can also be forwarded over the secure channel. \
-It is intended as a replacement for rlogin, rsh and rcp, and can be \
-used to provide applications with a secure communication channel."
-HOMEPAGE = "http://www.openssh.org/"
-LICENSE = "BSD"
-PR = "r6"
-
+require openssh.inc
SRC_URI = "ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-${PV}.tar.gz \
file://sftp-server-nolibcrypto.patch;patch=1 \
file://sshd_config \
- file://ssh_config \
- file://init"
-
-inherit autotools
-
-export ASKPASS_PROGRAM = "${bindir}/ssh-askpass"
-export LD = "${CC}"
-CFLAGS_prepend = "-I${S} "
-CFLAGS_append = " -D__FILE_OFFSET_BITS=64"
-LDFLAGS_prepend = "-L${S} -L${S}/openbsd-compat "
-EXTRA_OECONF = "--disable-suid-ssh --with-ssl=${STAGING_LIBDIR}/ssl \
- --with-rand-helper=no --without-pam \
- --without-zlib-version-check \
- --with-privsep-path=/var/run/sshd \
- --sysconfdir=${sysconfdir}/ssh \
- --with-xauth=/usr/bin/xauth"
-
-EXTRA_OEMAKE = "'STRIP_OPT='"
-
-do_configure_prepend () {
- if [ ! -e acinclude.m4 -a -e aclocal.m4 ]; then
- cp aclocal.m4 acinclude.m4
- fi
-}
-
-do_compile_append () {
- install -m 0644 ${WORKDIR}/sshd_config ${S}/
- install -m 0644 ${WORKDIR}/ssh_config ${S}/
-}
-
-do_install_append() {
- install -d ${D}${sysconfdir}/init.d
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/sshd
- mv ${D}${bindir}/scp ${D}${bindir}/scp.openssh
- mv ${D}${bindir}/ssh ${D}${bindir}/ssh.openssh
- rmdir ${D}/var/run/sshd ${D}/var/run ${D}/var
-}
-
-PACKAGES =+ " ssh-keygen openssh-scp openssh-ssh openssh-sshd openssh-sftp openssh-misc openssh-sftp-server"
-FILES_openssh-dbg +=${bindir}/.debug ${libdir}exec/.debug"
-FILES_openssh-scp = "${bindir}/scp.${PN}"
-FILES_openssh-ssh = "${bindir}/ssh.${PN} ${bindir}/slogin /${sysconfdir}/ssh/ssh_config"
-FILES_openssh-sshd = "${sbindir}/sshd /${sysconfdir}/init.d/sshd"
-FILES_openssh-sshd += " /${sysconfdir}/ssh/moduli /${sysconfdir}/ssh/sshd_config"
-FILES_openssh-sftp = "${bindir}/sftp"
-FILES_openssh-sftp-server = "${libdir}exec/sftp-server"
-FILES_openssh-misc = "${bindir}/ssh* ${libdir}exec/ssh*"
-FILES_ssh-keygen = "${bindir}/ssh-keygen"
-
-RDEPENDS_openssh += " openssh-scp openssh-ssh openssh-sshd ssh-keygen "
-DEPENDS_openssh-sshd += " update-rc.d"
-RDEPENDS_openssh-sshd += " update-rc.d ssh-keygen "
-
-pkg_postinst_openssh-sshd() {
-if test "x$D" != "x"; then
- exit 1
-else
- addgroup sshd
- adduser --system --home /var/run/sshd --no-create-home --disabled-password --ingroup sshd -s /bin/false sshd
- update-rc.d sshd defaults 9
-fi
-}
-
-pkg_postinst_openssh-scp() {
- update-alternatives --install ${bindir}/scp scp scp.${PN} 90
-}
-
-pkg_postinst_openssh-ssh() {
- update-alternatives --install ${bindir}/ssh ssh ssh.${PN} 90
-}
-
-pkg_postrm_openssh-ssh() {
- update-alternatives --remove ${bindir}/ssh ssh.${PN}
-}
-
-pkg_postrm_openssh-scp() {
- update-alternatives --remove ${bindir}/scp scp.${PN}
-}
-
-pkg_postrm_openssh-sshd() {
-if test "x$D" != "x"; then
- exit 1
-else
- ${sysconfdir}/init.d/sshd stop
- deluser sshd
- delgroup sshd
- update-rc.d -f sshd remove
-fi
-}
-
-CONFFILES_openssh-sshd = "${sysconfdir}/ssh/sshd_config"
-CONFFILES_openssh-ssh = "${sysconfdir}/ssh/ssh_config"
+ file://ssh_config \
+ file://init \
+ "
+PR = "r6"
--- /dev/null
+require openssh.inc
+DEFAULT_PREFERENCE = "-1"
+#not tested extensively(I tested only ssh) and it's an important recipe I'm afraid to broke
+SRC_URI = "ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-${PV}.tar.gz \
+ file://sshd_config \
+ file://ssh_config \
+ file://init \
+ file://openssh-5.2-sftp-server-nolibcrypto.patch;patch=1 \
+ "
git.openpandora.org / openembedded.git / commitdiff