phy: sun4i-usb: Call phy_passby even for PHY#0

On newer Allwinner SoC, there is a pair of EHCI/OHCI USB hosts
for OTG host mode. USB PHY passby must be configured for its
corresponding PHY. so we can call for PHY#0. on the other hand
in past usb-phy code the same thing can be restricted for
Lower SoC's, other than H3/H5/A64.

Now there is no need to restrict usb passby since the phy driver
is DT enabled, and the respective phy calls will trigger based
DT information initiated by the drivers.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 2b3cf48..01f585a 100644 (file)
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -300,8 +300,7 @@ static int sun4i_usb_phy_init(struct phy *phy)
                                    data->cfg->disc_thresh, PHY_DISCON_TH_LEN);
        }
 
-       if (usb_phy->id != 0)
-               sun4i_usb_phy_passby(phy, true);
+       sun4i_usb_phy_passby(phy, true);
 
        sun4i_usb_phy0_reroute(data, true);