+++ /dev/null
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src
-
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# Integrated EAP authenticator
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP authenticator
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP authenticator
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP authenticator
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP authenticator
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP authenticator
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP authenticator
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP authenticator
-#CONFIG_EAP_SIM=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# authenticator from external hosts using RADIUS.
-CONFIG_RADIUS_SERVER=y
+++ /dev/null
-#!/bin/sh
-DAEMON=/usr/sbin/hostapd
-NAME=httpd
-DESC="HOSTAP Daemon"
-ARGS="/etc/hostapd.conf"
-
-test -f $DAEMON || exit 0
-
-set -e
-
-case "$1" in
- start)
- echo -n "starting $DESC: $NAME... "
- start-stop-daemon -S -b -n $NAME -a $DAEMON -- $ARGS
- echo "done."
- ;;
- stop)
- echo -n "stopping $DESC: $NAME... "
- start-stop-daemon -K -n $NAME
- echo "done."
- ;;
- restart)
- echo "restarting $DESC: $NAME... "
- $0 stop
- $0 start
- echo "done."
- ;;
- reload)
- echo -n "reloading $DESC: $NAME... "
- killall -HUP $(basename ${DAEMON})
- echo "done."
- ;;
- *)
- echo "Usage: $0 {start|stop|restart|reload}"
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
---- driver_madwifi.c.orig 2005-03-18 15:12:53.392793216 +0100
-+++ driver_madwifi.c 2005-03-18 15:13:09.246383104 +0100
-@@ -21,7 +21,8 @@
- #include <sys/types.h>
- #include <sys/socket.h>
-
--#include <include/compat.h>
-+#include <net80211/compat.h>
-+#include <net80211/_ieee80211.h>
- #include <net80211/ieee80211.h>
- #include <net80211/ieee80211_crypto.h>
- #include <net80211/ieee80211_ioctl.h>
+++ /dev/null
---- Makefile.orig 2005-03-18 14:34:27.274376504 +0100
-+++ Makefile 2005-03-18 14:35:56.609795456 +0100
-@@ -1,7 +1,9 @@
--CC=gcc
-+CC?=gcc
- DIR_WPA_SUPPLICANT=.
- DIR_HOSTAP=.
-
-+TARGET_PREFIX ?= /usr/local/bin/
-+
- ifndef CFLAGS
- CFLAGS = -MMD -O2 -Wall -g
- endif
-@@ -170,10 +172,10 @@
- fi
-
- install: all
-- for i in $(ALL); do cp $$i /usr/local/bin/$$i; done
-+ for i in $(ALL); do cp $$i $(TARGET_PREFIX)/$$i; done
-
- hostapd: $(OBJS)
-- $(CC) -o hostapd $(OBJS) $(LIBS)
-+ $(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
-
- driver_conf.c: Makefile .config
- rm -f driver_conf.c
+++ /dev/null
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src
-
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# Integrated EAP authenticator
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP authenticator
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP authenticator
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP authenticator
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP authenticator
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP authenticator
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP authenticator
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP authenticator
-#CONFIG_EAP_SIM=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# authenticator from external hosts using RADIUS.
-CONFIG_RADIUS_SERVER=y
git.openpandora.org / openembedded.git / commitdiff