+++ /dev/null
-From: Mans Rullgard <mans@mansr.com>
-Date: Wed, 3 Sep 2008 23:19:04 +0000 (+0100)
-Subject: OMAP: Fix omapfb video mode selection when built as module
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=9bafff77f3028cd170c605c8d883963522c8546c
-
-OMAP: Fix omapfb video mode selection when built as module
-
-This fixes the video_mode parameter when omapfb is built as a module.
-
-Signed-off-by: Mans Rullgard <mans@mansr.com>
----
-
-diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
-index 19a1a83..e0b3642 100644
---- a/drivers/video/omap/omapfb_main.c
-+++ b/drivers/video/omap/omapfb_main.c
-@@ -54,7 +54,7 @@ static unsigned long def_vxres;
- static unsigned long def_vyres;
- static unsigned int def_rotate;
- static unsigned int def_mirror;
--static char def_mode[16] = CONFIG_FB_OMAP_VIDEO_MODE;
-+static char def_mode[16];
-
- #ifdef CONFIG_FB_OMAP_MANUAL_UPDATE
- static int manual_update = 1;
-@@ -2143,7 +2143,8 @@ static int __init omapfb_init(void)
- omapfb_setup(option);
- #endif
-
-- omapfb_find_mode(def_mode, &video_mode);
-+ omapfb_find_mode(def_mode[0]? def_mode : CONFIG_FB_OMAP_VIDEO_MODE,
-+ &video_mode);
-
- /* Register the driver with LDM */
- if (platform_driver_register(&omapfb_driver)) {
+++ /dev/null
-From: Mans Rullgard <mans@mansr.com>
-Date: Sun, 6 Jul 2008 13:22:54 +0000 (+0100)
-Subject: omapfb: use PCD if set in panel config
-X-Git-Tag: beagle-5
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=c8060d36ae156771f00a7a27cabf1b4435c378bd
-
-omapfb: use PCD if set in panel config
----
-
-diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
-index 3b36227..4e1a8e3 100644
---- a/drivers/video/omap/dispc.c
-+++ b/drivers/video/omap/dispc.c
-@@ -798,7 +798,13 @@ static void set_lcd_timings(void)
- l |= panel->acb & 0xff;
- dispc_write_reg(DISPC_POL_FREQ, l);
-
-- calc_ck_div(is_tft, panel->pixel_clock * 1000, &lck_div, &pck_div);
-+ if (panel->pcd) {
-+ pck_div = panel->pcd;
-+ lck_div = 1;
-+ } else {
-+ calc_ck_div(is_tft, panel->pixel_clock * 1000,
-+ &lck_div, &pck_div);
-+ }
-
- l = dispc_read_reg(DISPC_DIVISOR);
- l &= ~(FLD_MASK(16, 8) | FLD_MASK(0, 8));
+++ /dev/null
-diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
-index bdeb8fb..bf256f3 100644
---- a/drivers/video/omap/Kconfig
-+++ b/drivers/video/omap/Kconfig
-@@ -7,6 +7,27 @@ config FB_OMAP
- help
- Frame buffer driver for OMAP based boards.
-
-+choice
-+ depends on FB_OMAP && MACH_OMAP3_BEAGLE
-+ prompt "Screen resolution"
-+ default FB_OMAP_079M3R
-+ help
-+ Selected desired screen resolution
-+
-+config FB_OMAP_031M3R
-+ boolean "640 x 480 @ 60 Hz Reduced blanking"
-+
-+config FB_OMAP_048M3R
-+ boolean "800 x 600 @ 60 Hz Reduced blanking"
-+
-+config FB_OMAP_079M3R
-+ boolean "1024 x 768 @ 60 Hz Reduced blanking"
-+
-+config FB_OMAP_092M9R
-+ boolean "1280 x 720 @ 60 Hz Reduced blanking"
-+
-+endchoice
-+
- config FB_OMAP_LCDC_EXTERNAL
- bool "External LCD controller support"
- depends on FB_OMAP
-diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c
-index 69d4e06..5e098c2 100644
---- a/drivers/video/omap/lcd_omap3beagle.c
-+++ b/drivers/video/omap/lcd_omap3beagle.c
-@@ -31,10 +31,6 @@
-
- #define LCD_PANEL_ENABLE_GPIO 170
-
--#define LCD_XRES 1024
--#define LCD_YRES 768
--#define LCD_PIXCLOCK 64000 /* in kHz */
--
- static int omap3beagle_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
- {
-@@ -65,19 +61,76 @@ static unsigned long omap3beagle_panel_get_caps(struct lcd_panel *panel)
- struct lcd_panel omap3beagle_panel = {
- .name = "omap3beagle",
- .config = OMAP_LCDC_PANEL_TFT,
--
-- .bpp = 24,
-+ .bpp = 16,
- .data_lines = 24,
-- .x_res = LCD_XRES,
-- .y_res = LCD_YRES,
-- .hsw = 3, /* hsync_len (4) - 1 */
-- .hfp = 3, /* right_margin (4) - 1 */
-- .hbp = 39, /* left_margin (40) - 1 */
-- .vsw = 1, /* vsync_len (2) - 1 */
-- .vfp = 2, /* lower_margin */
-- .vbp = 7, /* upper_margin (8) - 1 */
--
-- .pixel_clock = LCD_PIXCLOCK,
-+
-+#if defined CONFIG_FB_OMAP_031M3R
-+
-+ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
-+ .x_res = 640,
-+ .y_res = 480,
-+ .hfp = 48,
-+ .hsw = 32,
-+ .hbp = 80,
-+ .vfp = 3,
-+ .vsw = 4,
-+ .vbp = 7,
-+ .pixel_clock = 23500,
-+
-+#elif defined CONFIG_FB_OMAP_048M3R
-+
-+ /* 800 x 600 @ 60 Hz Reduced blanking VESA CVT 0.48M3-R */
-+ .x_res = 800,
-+ .y_res = 600,
-+ .hfp = 48,
-+ .hsw = 32,
-+ .hbp = 80,
-+ .vfp = 3,
-+ .vsw = 4,
-+ .vbp = 11,
-+ .pixel_clock = 35500,
-+
-+#elif defined CONFIG_FB_OMAP_079M3R
-+
-+ /* 1024 x 768 @ 60 Hz Reduced blanking VESA CVT 0.79M3-R */
-+ .x_res = 1024,
-+ .y_res = 768,
-+ .hfp = 48,
-+ .hsw = 32,
-+ .hbp = 80,
-+ .vfp = 3,
-+ .vsw = 4,
-+ .vbp = 15,
-+ .pixel_clock = 56000,
-+
-+#elif defined CONFIG_FB_OMAP_092M9R
-+
-+ /* 1280 x 720 @ 60 Hz Reduced blanking VESA CVT 0.92M9-R */
-+ .x_res = 1280,
-+ .y_res = 720,
-+ .hfp = 48,
-+ .hsw = 32,
-+ .hbp = 80,
-+ .vfp = 3,
-+ .vsw = 5,
-+ .vbp = 13,
-+ .pixel_clock = 64000,
-+
-+#else
-+
-+ /* use 640 x 480 if no config option */
-+ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
-+ .x_res = 640,
-+ .y_res = 480,
-+ .hfp = 48,
-+ .hsw = 32,
-+ .hbp = 80,
-+ .vfp = 3,
-+ .vsw = 4,
-+ .vbp = 7,
-+ .pixel_clock = 23500,
-+
-+#endif
-
- .init = omap3beagle_panel_init,
- .cleanup = omap3beagle_panel_cleanup,
-
+++ /dev/null
-From: Purushotam Kumar <purushotam@ti.com>
-Date: Fri, 18 Jul 2008 23:28:57 +0000 (-0700)
-Subject: OMAP3:devices.c:Enabling 4-bit for SD card
-X-Git-Url: http://www.sakoman.net/cgi-bin/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff_plain;h=6c4d34031c80ca4b50ffe73a4ef7fe197a760a60
-
-OMAP3:devices.c:Enabling 4-bit for SD card
-
-SD card was working in 1-bit mode.This patch will configure SD card in
-4-bit mode and hence performance will increase.
-
-Signed-off-by: Purushotam Kumar <purushotam@ti.com>
-Acked-by: Madhusudhan Chikkature Rajashekar <madhu.cr@ti.com>
----
-
-diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
-index b83f9a6..d0cfceb 100644
---- a/arch/arm/plat-omap/devices.c
-+++ b/arch/arm/plat-omap/devices.c
-@@ -296,13 +296,17 @@ static void __init omap_init_mmc(void)
- mmc = &mmc_conf->mmc[0];
-
- if (cpu_is_omap2430() || cpu_is_omap34xx()) {
-- if (mmc->enabled)
-+ if (mmc->enabled) {
-+ mmc1_data.conf = *mmc;
- (void) platform_device_register(&mmc_omap_device1);
-+ }
-
- #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
- mmc = &mmc_conf->mmc[1];
-- if (mmc->enabled)
-+ if (mmc->enabled) {
-+ mmc2_data.conf = *mmc;
- (void) platform_device_register(&mmc_omap_device2);
-+ }
- #endif
-
- return;
+++ /dev/null
-From: Gadiyar, Anand <gadiyar@ti.com>
-Date: Wed, 13 Aug 2008 07:05:29 +0000 (+0530)
-Subject: MUSB: Workaround for simultaneous TX and RX usage
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=2e6aa4efb0e14c51ff0427927b1b38136911fa93
-
-MUSB: Workaround for simultaneous TX and RX usage
-
-MUSB: Workaround for simultaneous TX and RX usage
-
-MUSB RTL V1.4 has a hardware issue which results in a DMA controller
-hang when TX and RX DMA channels are simultaneously enabled. This
-affects at least OMAP2430 and OMAP34XX.
-
-Since RX transfers are in Mode 0 and anyway result in one DMA interrupt
-per packet, we can use System DMA to unload the RX fifos. MUSB DMA can
-be used for all TX channels as before.
-
-Tested with full-duplex TX and RX transfers using g_ether. Runs for 24
-hours without a hang. Without this patch, the hang occurs within minutes.
-
-This issue was first reported by Jon Hunter on [1]
-
-[1] http://marc.info/?l=linux-omap&m=119634480534453&w=2
-
-Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
----
-
-diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
-index a485a86..8583e54 100644
---- a/drivers/usb/musb/Kconfig
-+++ b/drivers/usb/musb/Kconfig
-@@ -150,6 +150,14 @@ config USB_INVENTRA_DMA
- help
- Enable DMA transfers using Mentor's engine.
-
-+config MUSB_USE_SYSTEM_DMA_RX
-+ bool 'Use System DMA for RX endpoints'
-+ depends on USB_MUSB_HDRC && USB_INVENTRA_DMA
-+ help
-+ MUSB RTL version 1.4 has a hardware issue when TX and RX DMA
-+ channels are simultaneously enabled. To work around this issue,
-+ you can choose to use System DMA for RX channels.
-+
- config USB_TI_CPPI_DMA
- bool
- depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
-index 32bb1e2..d1c1ea0 100644
---- a/drivers/usb/musb/musbhsdma.c
-+++ b/drivers/usb/musb/musbhsdma.c
-@@ -34,6 +34,7 @@
- #include <linux/interrupt.h>
- #include <linux/platform_device.h>
- #include "musb_core.h"
-+#include <asm/dma.h>
-
- #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
- #include "omap2430.h"
-@@ -64,6 +65,9 @@
-
- #define MUSB_HSDMA_CHANNELS 8
-
-+#define MUSB_FIFO_ADDRESS(epnum) \
-+ ((unsigned long) (OMAP_HSOTG_BASE + MUSB_FIFO_OFFSET(epnum)))
-+
- struct musb_dma_controller;
-
- struct musb_dma_channel {
-@@ -75,6 +79,8 @@ struct musb_dma_channel {
- u8 bIndex;
- u8 epnum;
- u8 transmit;
-+
-+ int sysdma_channel;
- };
-
- struct musb_dma_controller {
-@@ -93,6 +99,42 @@ static int dma_controller_start(struct dma_controller *c)
- return 0;
- }
-
-+#ifdef CONFIG_MUSB_USE_SYSTEM_DMA_RX
-+static void musb_sysdma_completion(int lch, u16 ch_status, void *data)
-+{
-+ u32 dwAddress;
-+ unsigned long flags;
-+
-+ struct dma_channel *pChannel;
-+
-+ struct musb_dma_channel *pImplChannel =
-+ (struct musb_dma_channel *) data;
-+ struct musb_dma_controller *controller = pImplChannel->controller;
-+ struct musb *musb = controller->pDmaPrivate;
-+ pChannel = &pImplChannel->Channel;
-+
-+ DBG(2, "lch = 0x%d, ch_status = 0x%x\n", lch, ch_status);
-+ spin_lock_irqsave(&musb->lock, flags);
-+
-+ dwAddress = (u32) omap_get_dma_dst_pos(pImplChannel->sysdma_channel);
-+ pChannel->actual_len = dwAddress - pImplChannel->dwStartAddress;
-+
-+ DBG(2, "ch %p, 0x%x -> 0x%x (%d / %d) %s\n",
-+ pChannel, pImplChannel->dwStartAddress, dwAddress,
-+ pChannel->actual_len, pImplChannel->len,
-+ (pChannel->actual_len < pImplChannel->len) ?
-+ "=> reconfig 0": "=> complete");
-+
-+ pChannel->status = MUSB_DMA_STATUS_FREE;
-+ musb_dma_completion(musb, pImplChannel->epnum, pImplChannel->transmit);
-+
-+ spin_unlock_irqrestore(&musb->lock, flags);
-+ return;
-+}
-+#else
-+#define musb_sysdma_completion NULL
-+#endif
-+
- static void dma_channel_release(struct dma_channel *pChannel);
-
- static int dma_controller_stop(struct dma_controller *c)
-@@ -144,6 +186,29 @@ static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
- /* Tx => mode 1; Rx => mode 0 */
- pChannel->desired_mode = transmit;
- pChannel->actual_len = 0;
-+ pImplChannel->sysdma_channel = -1;
-+
-+#ifdef CONFIG_MUSB_USE_SYSTEM_DMA_RX
-+ if (!transmit) {
-+ int ret;
-+ ret = omap_request_dma(OMAP24XX_DMA_NO_DEVICE,
-+ "MUSB SysDMA", musb_sysdma_completion,
-+ (void *) pImplChannel,
-+ &(pImplChannel->sysdma_channel));
-+
-+ if (ret) {
-+ printk(KERN_ERR "request_dma failed:"
-+ " %d\n", ret);
-+ controller->bmUsedChannels &=
-+ ~(1 << bBit);
-+ pChannel->status =
-+ MUSB_DMA_STATUS_UNKNOWN;
-+ pImplChannel->sysdma_channel = -1;
-+ pChannel = NULL;
-+ }
-+ }
-+#endif
-+
- break;
- }
- }
-@@ -163,6 +228,12 @@ static void dma_channel_release(struct dma_channel *pChannel)
- ~(1 << pImplChannel->bIndex);
-
- pChannel->status = MUSB_DMA_STATUS_UNKNOWN;
-+
-+ if (pImplChannel->sysdma_channel != -1) {
-+ omap_stop_dma(pImplChannel->sysdma_channel);
-+ omap_free_dma(pImplChannel->sysdma_channel);
-+ pImplChannel->sysdma_channel = -1;
-+ }
- }
-
- static void configure_channel(struct dma_channel *pChannel,
-@@ -179,41 +250,69 @@ static void configure_channel(struct dma_channel *pChannel,
- DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
- pChannel, packet_sz, dma_addr, len, mode);
-
-- if (mode) {
-- csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
-- BUG_ON(len < packet_sz);
-+ if (pImplChannel->sysdma_channel != -1) {
-+ /* System DMA */
-+ /* RX: set src = FIFO */
-+
-+ omap_set_dma_transfer_params(pImplChannel->sysdma_channel,
-+ OMAP_DMA_DATA_TYPE_S8,
-+ len, 1, /* One frame */
-+ OMAP_DMA_SYNC_ELEMENT,
-+ OMAP24XX_DMA_NO_DEVICE,
-+ 0); /* Src Sync */
-+
-+ omap_set_dma_src_params(pImplChannel->sysdma_channel, 0,
-+ OMAP_DMA_AMODE_CONSTANT,
-+ MUSB_FIFO_ADDRESS(pImplChannel->epnum),
-+ 0, 0);
-
-- if (packet_sz >= 64) {
-- csr |= MUSB_HSDMA_BURSTMODE_INCR16
-+ omap_set_dma_dest_params(pImplChannel->sysdma_channel, 0,
-+ OMAP_DMA_AMODE_POST_INC, dma_addr,
-+ 0, 0);
-+
-+ omap_set_dma_dest_data_pack(pImplChannel->sysdma_channel, 1);
-+ omap_set_dma_dest_burst_mode(pImplChannel->sysdma_channel,
-+ OMAP_DMA_DATA_BURST_16);
-+
-+ omap_start_dma(pImplChannel->sysdma_channel);
-+
-+ } else { /* Mentor DMA */
-+ if (mode) {
-+ csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
-+ BUG_ON(len < packet_sz);
-+
-+ if (packet_sz >= 64) {
-+ csr |= MUSB_HSDMA_BURSTMODE_INCR16
- << MUSB_HSDMA_BURSTMODE_SHIFT;
-- } else if (packet_sz >= 32) {
-- csr |= MUSB_HSDMA_BURSTMODE_INCR8
-+ } else if (packet_sz >= 32) {
-+ csr |= MUSB_HSDMA_BURSTMODE_INCR8
- << MUSB_HSDMA_BURSTMODE_SHIFT;
-- } else if (packet_sz >= 16) {
-- csr |= MUSB_HSDMA_BURSTMODE_INCR4
-+ } else if (packet_sz >= 16) {
-+ csr |= MUSB_HSDMA_BURSTMODE_INCR4
- << MUSB_HSDMA_BURSTMODE_SHIFT;
-+ }
- }
-- }
-
-- csr |= (pImplChannel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
-- | (1 << MUSB_HSDMA_ENABLE_SHIFT)
-- | (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
-- | (pImplChannel->transmit
-- ? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
-- : 0);
--
-- /* address/count */
-- musb_writel(mbase,
-- MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
-- dma_addr);
-- musb_writel(mbase,
-- MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
-- len);
--
-- /* control (this should start things) */
-- musb_writew(mbase,
-- MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
-- csr);
-+ csr |= (pImplChannel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
-+ | (1 << MUSB_HSDMA_ENABLE_SHIFT)
-+ | (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
-+ | (pImplChannel->transmit
-+ ? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
-+ : 0);
-+
-+ /* address/count */
-+ musb_writel(mbase,
-+ MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
-+ dma_addr);
-+ musb_writel(mbase,
-+ MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
-+ len);
-+
-+ /* control (this should start things) */
-+ musb_writew(mbase,
-+ MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
-+ csr);
-+ } /* Mentor DMA */
- }
-
- static int dma_channel_program(struct dma_channel *pChannel,
-@@ -265,6 +364,12 @@ static int dma_channel_abort(struct dma_channel *pChannel)
- MUSB_EP_OFFSET(pImplChannel->epnum, MUSB_TXCSR),
- csr);
- } else {
-+ if (pImplChannel->sysdma_channel != -1) {
-+ omap_stop_dma(pImplChannel->sysdma_channel);
-+ omap_free_dma(pImplChannel->sysdma_channel);
-+ pImplChannel->sysdma_channel = -1;
-+ }
-+
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(pImplChannel->epnum, MUSB_RXCSR));
- csr &= ~(MUSB_RXCSR_AUTOCLEAR |
--- /dev/null
+From: Ajay Kumar Gupta <ajay.gupta@ti.com>
+To: linux-usb@vger.kernel.org
+Cc: linux-omap@vger.kernel.org, felipe.balbi@nokia.com,
+Subject: [PATCH] MUSB: Fix for kernel panic with multiple bulk transfer
+Date: Wed, 1 Oct 2008 13:08:56 +0530
+
+Fixes kernel panic when multiple copy is performed among more than two mass
+storage media and transfer is aborted.musb_advance_schedule(),
+musb_urb_dequeue(),musb_cleanup_urb() and musb_h_disable() functions have
+been modified to correct urb handling associated with bulk and control
+endpoints which are multiplexed on one hardware endpoint.
+
+musb_advance_schedule() has been removed from musb_cleanup_urb() and added
+to musb_urb_dequeue(). musb_h_disable() has been modified to take care of
+multiple qh on same hw_ep scenario.
+
+Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+CC: Romit Dasgupta <romit@ti.com>
+---
+Suggestions welcome to move while loop doing kfree(qh) from
+musb_advance_schedule() and musb_h_disable() to musb_giveback().
+
+ drivers/usb/musb/musb_host.c | 105 ++++++++++++++++++++++++++++++-----------
+ 1 files changed, 77 insertions(+), 28 deletions(-)
+
+diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
+index 8b4be01..c2474de 100644
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -427,8 +427,17 @@ musb_advance_schedule(struct musb *musb, struct urb *urb,
+ qh = musb_giveback(qh, urb, 0);
+ else
+ qh = musb_giveback(qh, urb, urb->status);
++ while (qh && qh->is_ready && list_empty(&qh->hep->urb_list)) {
++ struct list_head *head;
++ head = qh->ring.prev;
++ list_del(&qh->ring);
++ qh->hep->hcpriv = NULL;
++ kfree(qh);
++ qh = first_qh(head);
++ }
+
+- if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
++
++ if (qh && qh->is_ready) {
+ DBG(4, "... next ep%d %cX urb %p\n",
+ hw_ep->epnum, is_in ? 'R' : 'T',
+ next_urb(qh));
+@@ -1964,8 +1973,6 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+ /* flush cpu writebuffer */
+ csr = musb_readw(epio, MUSB_TXCSR);
+ }
+- if (status == 0)
+- musb_advance_schedule(ep->musb, urb, ep, is_in);
+ return status;
+ }
+
+@@ -2026,13 +2033,24 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+ /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
+ if (ret < 0 || (sched && qh != first_qh(sched))) {
+ int ready = qh->is_ready;
+-
++ int type = urb->pipe;
+ ret = 0;
+ qh->is_ready = 0;
+ __musb_giveback(musb, urb, 0);
+- qh->is_ready = ready;
+- } else
++
++ if (list_empty(&qh->hep->urb_list) && list_empty(&qh->ring))
++ list_del(&qh->ring);
++ else
++ qh->is_ready = ready;
++ if (usb_pipeisoc(type))
++ musb->periodic[qh->hw_ep->epnum] = NULL;
++ } else {
+ ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
++ if (!ret) {
++ musb_advance_schedule(qh->hw_ep->musb, urb, qh->hw_ep,
++ urb->pipe & USB_DIR_IN);
++ }
++ }
+ done:
+ spin_unlock_irqrestore(&musb->lock, flags);
+ return ret;
+@@ -2046,14 +2064,17 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+ unsigned long flags;
+ struct musb *musb = hcd_to_musb(hcd);
+ u8 is_in = epnum & USB_DIR_IN;
+- struct musb_qh *qh = hep->hcpriv;
++ struct musb_qh *qh, *qh_for_curr_urb;
+ struct urb *urb, *tmp;
+ struct list_head *sched;
+-
+- if (!qh)
+- return;
++ int i;
+
+ spin_lock_irqsave(&musb->lock, flags);
++ qh = hep->hcpriv;
++ if (!qh) {
++ spin_unlock_irqrestore(&musb->lock, flags);
++ return;
++ }
+
+ switch (qh->type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+@@ -2065,6 +2086,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+ else
+ sched = &musb->out_bulk;
+ break;
++ case USB_ENDPOINT_XFER_ISOC:
++ case USB_ENDPOINT_XFER_INT:
++ for (i = 0; i < musb->nr_endpoints; i++) {
++ if (musb->periodic[i] == qh)
++ sched = &qh->ring;
++ break;
++ }
+ default:
+ /* REVISIT when we get a schedule tree, periodic transfers
+ * won't always be at the head of a singleton queue...
+@@ -2073,26 +2101,47 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+ break;
+ }
+
+- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
+-
+ /* kick first urb off the hardware, if needed */
+- qh->is_ready = 0;
+- if (!sched || qh == first_qh(sched)) {
++ if (sched) {
++ qh_for_curr_urb = qh;
+ urb = next_urb(qh);
+-
+- /* make software (then hardware) stop ASAP */
+- if (!urb->unlinked)
+- urb->status = -ESHUTDOWN;
+-
+- /* cleanup */
+- musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+- } else
+- urb = NULL;
+-
+- /* then just nuke all the others */
+- list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
+- musb_giveback(qh, urb, -ESHUTDOWN);
+-
++ if (urb) {
++ /* make software (then hardware) stop ASAP */
++ if (!urb->unlinked)
++ urb->status = -ESHUTDOWN;
++ /* cleanup first urb of first qh; */
++ if (qh == first_qh(sched)) {
++ musb_cleanup_urb(urb, qh,
++ urb->pipe & USB_DIR_IN);
++ }
++ qh = musb_giveback(qh, urb, -ESHUTDOWN);
++ if (qh == qh_for_curr_urb) {
++ list_for_each_entry_safe_from(urb, tmp,
++ &hep->urb_list, urb_list) {
++ qh = musb_giveback(qh, tmp, -ESHUTDOWN);
++ if (qh != qh_for_curr_urb)
++ break;
++ }
++ }
++ }
++ /* pick the next candidate and go */
++ if (qh && qh->is_ready) {
++ while (qh && qh->is_ready &&
++ list_empty(&qh->hep->urb_list)) {
++ struct list_head *head;
++ head = qh->ring.prev;
++ list_del(&qh->ring);
++ qh->hep->hcpriv = NULL;
++ kfree(qh);
++ qh = first_qh(head);
++ }
++ if (qh && qh->is_ready) {
++ epnum = qh->hep->desc.bEndpointAddress;
++ is_in = epnum & USB_DIR_IN;
++ musb_start_urb(musb, is_in, qh);
++ }
++ }
++ }
+ spin_unlock_irqrestore(&musb->lock, flags);
+ }
+
+--
+1.5.6
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at http://vger.kernel.org/majordomo-info.html
+++ /dev/null
-without this the below error messages were coming continuously\r
-\r
-TWL4030 module irq 369 is disabled but can't be masked!\r
-<2>TWL4030 module irq 369 is disabled but can't be masked!\r
-\r
-Signed-off-by: Arun C <arunedarath@mistralsolutions.com>\r
----\r
- arch/arm/mach-omap2/board-omap3evm.c | 2 ++\r
- 1 files changed, 2 insertions(+), 0 deletions(-)\r
-\r
-diff --git a/arch/arm/mach-omap2/board-omap3evm.c\r
-b/arch/arm/mach-omap2/board-omap3evm.c\r
-index 92f70ce..f9fd06b 100644\r
---- a/arch/arm/mach-omap2/board-omap3evm.c\r
-+++ b/arch/arm/mach-omap2/board-omap3evm.c\r
-@@ -22,6 +22,7 @@\r
- #include <linux/input.h>\r
- #include <linux/spi/spi.h>\r
- #include <linux/spi/ads7846.h>\r
-+#include <linux/i2c/twl4030.h>\r
-\r
- #include <mach/hardware.h>\r
- #include <asm/mach-types.h>\r
-@@ -176,6 +177,7 @@ static struct omap_kp_platform_data omap3evm_kp_data = {\r
- .keymap = omap3evm_keymap,\r
- .keymapsize = ARRAY_SIZE(omap3evm_keymap),\r
- .rep = 1,\r
-+ .irq = TWL4030_MODIRQ_KEYPAD,\r
- };\r
-\r
- static struct platform_device omap3evm_kp_device = {\r
-\r
SRCREV = "e1c49d7d22af768188e2a54c167ed79919361e55"
PV = "2.6.26+2.6.27-rc7+${PR}+git${SRCREV}"
-PR = "r9"
+PR = "r10"
SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \
file://defconfig"
file://mru-make-video-timings-selectable.diff;patch=1 \
file://mru-enable-overlay-optimalization.diff;patch=1 \
file://musb-fix-ISO-in-unlink.diff;patch=1 \
+ file://musb-fix-multiple-bulk-transfers.diff;patch=1 \
"
-temporarely-disabled = " \
- file://musb-dmafix.patch;patch=1 \
-"
SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \
file://beagle-asoc.diff;patch=1 \
git.openpandora.org / openembedded.git / commitdiff