pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig

[pandora-u-boot.git] / include / configs / clearfog.h

diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 059c302..f951082 100644 (file)
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_CLEARFOG_H
@@ -22,13 +21,6 @@
  * Commands configuration
  */
 
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
-#define CONFIG_I2C_MVTWSI_BASE0                MVEBU_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE           0x0
-#define CONFIG_SYS_I2C_SPEED           100000
-
 /* SPI NOR flash default params, used by sf commands */
 #define CONFIG_SF_DEFAULT_BUS          1
 
@@ -37,6 +29,10 @@
  */
 #define CONFIG_SYS_MMC_BASE            MVEBU_SDIO_BASE
 
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+#endif
+
 /* USB/EHCI configuration */
 #define CONFIG_EHCI_IS_TDI
 
@@ -55,31 +51,28 @@
 #define CONFIG_ENV_OFFSET              0xf0000
 #define CONFIG_ENV_ADDR                        CONFIG_ENV_OFFSET
 
-#define CONFIG_PHY_MARVELL             /* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
+/* SATA support */
+#ifdef CONFIG_SCSI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                       CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS \
        "fdt_high=0x10000000\0"         \
        "initrd_high=0x10000000\0"
 
 /* SPL */
-/*
- * Select the boot device here
- *
- * Currently supported are:
- * SPL_BOOT_SPI_NOR_FLASH      - Booting via SPI NOR flash
- * SPL_BOOT_SDIO_MMC_CARD      - Booting via SDIO/MMC card (partition 1)
- */
-#define SPL_BOOT_SPI_NOR_FLASH         1
-#define SPL_BOOT_SDIO_MMC_CARD         2
-#define CONFIG_SPL_BOOT_DEVICE         SPL_BOOT_SDIO_MMC_CARD
 
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE                        (140 << 10)
@@ -96,13 +89,11 @@
 #define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
 
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
+#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI)
 /* SPL related SPI defines */
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
 #define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
+#elif defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC)
 /* SPL related MMC defines */
 #define CONFIG_SYS_MMC_U_BOOT_OFFS             (160 << 10)
 #define CONFIG_SYS_U_BOOT_OFFS                 CONFIG_SYS_MMC_U_BOOT_OFFS