pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device

[pandora-kernel.git] / drivers / staging / comedi / drivers / ni_daq_700.c

diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 8107e40..803683b 100644 (file)
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -47,7 +47,6 @@ IRQ is assigned but not used.
 
 #include <linux/ioport.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -491,15 +490,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
        local->link = link;
        link->priv = local;
 
-       /*
-          General socket configuration defaults can go here.  In this
-          client, we assume very little, and rely on the CIS for almost
-          everything.  In most clients, many details (i.e., number, sizes,
-          and attributes of IO windows) are fixed by the nature of the
-          device, and can be hard-wired here.
-        */
-       link->conf.Attributes = 0;
-
        pcmcia_cur_dev = link;
 
        dio700_config(link);
@@ -550,10 +540,10 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
 
        /* Does this card need audio output? */
        if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-               p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+               p_dev->config_flags |= CONF_ENABLE_SPKR;
 
        /* Do we need to allocate an interrupt? */
-       p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+       p_dev->config_flags |= CONF_ENABLE_IRQ;
 
        /* IO window settings */
        p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -602,14 +592,13 @@ static void dio700_config(struct pcmcia_device *link)
           the I/O windows and the interrupt mapping, and putting the
           card and host interface into "Memory and IO" mode.
         */
-       ret = pcmcia_request_configuration(link, &link->conf);
+       ret = pcmcia_enable_device(link);
        if (ret != 0)
                goto failed;
 
        /* Finally, report what we've done */
        dev_info(&link->dev, "index 0x%02x", link->config_index);
-       if (link->conf.Attributes & CONF_ENABLE_IRQ)
-               printk(", irq %d", link->irq);
+       printk(", irq %d", link->irq);
        if (link->resource[0])
                printk(", io %pR", link->resource[0]);
        if (link->resource[1])