video: Add information about using TrueType fonts

[pandora-u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index aeb1c14..a8461dd 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-VERSION = 2018
-PATCHLEVEL = 11
+VERSION = 2019
+PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc2
 NAME =
 
 # *DOCUMENTATION*
@@ -443,7 +443,7 @@ defaultenv_h := include/generated/defaultenv_autogenerated.h
 
 no-dot-config-targets := clean clobber mrproper distclean \
                         help %docs check% coccicheck \
-                        ubootversion backup tests
+                        ubootversion backup tests check qcheck
 
 config-targets := 0
 mixed-targets  := 0
@@ -695,7 +695,6 @@ libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 libs-y += drivers/mtd/spi/
 libs-y += drivers/net/
 libs-y += drivers/net/phy/
-libs-y += drivers/pci/
 libs-y += drivers/power/ \
        drivers/power/domain/ \
        drivers/power/fuel_gauge/ \
@@ -725,8 +724,7 @@ libs-y += common/
 libs-y += env/
 libs-$(CONFIG_API) += api/
 libs-$(CONFIG_HAS_POST) += post/
-libs-y += test/
-libs-y += test/dm/
+libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
 libs-$(CONFIG_UT_ENV) += test/env/
 libs-$(CONFIG_UT_OVERLAY) += test/overlay/
 
@@ -852,6 +850,8 @@ ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
 ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
 endif
 
+ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+
 # Add optional build target if defined in board/cpu/soc headers
 ifneq ($(CONFIG_BUILD_TARGET),)
 ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
@@ -912,11 +912,47 @@ cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
 
 all:           $(ALL-y) cfg
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
-       @echo "===================== WARNING ======================"
-       @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
-       @echo "(possibly in a subsequent patch in your series)"
-       @echo "before sending patches to the mailing list."
-       @echo "===================================================="
+       @echo >&2 "===================== WARNING ======================"
+       @echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+       @echo >&2 "(possibly in a subsequent patch in your series)"
+       @echo >&2 "before sending patches to the mailing list."
+       @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_MMC),y)
+ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+       @echo >&2 "===================== WARNING ======================"
+       @echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
+       @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
+       @echo >&2 "Failure to update by the deadline may result in board removal."
+       @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+       @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_USB),y)
+ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+       @echo >&2 "===================== WARNING ======================"
+       @echo >&2 "This board does not use CONFIG_DM_USB. Please update"
+       @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
+       @echo >&2 "Failure to update by the deadline may result in board removal."
+       @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+       @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_LIBATA)$(CONFIG_DM_SCSI)$(CONFIG_MVSATA_IDE),y)
+       @echo >&2 "===================== WARNING ======================"
+       @echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
+       @echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
+       @echo >&2 "Failure to update by the deadline may result in board removal."
+       @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+       @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_OF_EMBED),y)
+       @echo >&2 "===================== WARNING ======================"
+       @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+       @echo >&2 "be used for debugging purposes. Please use"
+       @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+       @echo >&2 "See doc/README.fdt-control for more info."
+       @echo >&2 "===================================================="
 endif
        @# Check that this build does not use CONFIG options that we do not
        @# know about unless they are in Kconfig. All the existing CONFIG
@@ -1361,6 +1397,26 @@ u-boot.elf: u-boot.bin
        $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
        $(call if_changed,u-boot-elf)
 
+# MediaTek's ARM-based u-boot needs a header to contains its load address
+# which is parsed by the BootROM.
+# If the SPL build is enabled, the header will be added to the spl binary,
+# and the spl binary and the u-boot.img will be combined into one file.
+# Otherwise the header will be added to the u-boot.bin directly.
+
+ifeq ($(CONFIG_SPL),y)
+spl/u-boot-spl-mtk.bin: spl/u-boot-spl
+
+u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
+       $(call if_changed,binman)
+else
+MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
+       -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+       -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+u-boot-mtk.bin: u-boot.bin FORCE
+       $(call if_changed,mkimage)
+endif
+
 ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
 
 # Rule to link u-boot
@@ -1705,6 +1761,7 @@ help:
        @echo  'Test targets:'
        @echo  ''
        @echo  '  check           - Run all automated tests that use sandbox'
+       @echo  '  qcheck          - Run quick automated tests that use sandbox'
        @echo  ''
        @echo  'Other generic targets:'
        @echo  '  all             - Build all necessary images depending on configuration'
@@ -1747,6 +1804,9 @@ help:
 tests check:
        $(srctree)/test/run
 
+qcheck:
+       $(srctree)/test/run quick
+
 # Documentation targets
 # ---------------------------------------------------------------------------
 DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \