1 # Helper to resolve issues with configs that have SPI enabled but I2C
2 # modular, meaning we can't build the codec driver in with I2C support.
3 # We use an ordered list of conditional defaults to pick the appropriate
4 # setting - SPI can't be modular so that case doesn't need to be covered.
5 config SND_SOC_I2C_AND_SPI
9 default y if SPI_MASTER=y
11 config SND_SOC_ALL_CODECS
12 tristate "Build all ASoC CODEC drivers"
14 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
15 select SND_SOC_AD1836 if SPI_MASTER
16 select SND_SOC_AD1938 if SPI_MASTER
17 select SND_SOC_AD1980 if SND_SOC_AC97_BUS
18 select SND_SOC_AD73311 if I2C
19 select SND_SOC_AK4104 if SPI_MASTER
20 select SND_SOC_AK4535 if I2C
21 select SND_SOC_CS4270 if I2C
22 select SND_SOC_MAX9877 if I2C
23 select SND_SOC_PCM3008
25 select SND_SOC_SSM2602 if I2C
26 select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
27 select SND_SOC_TLV320AIC23 if I2C
28 select SND_SOC_TLV320AIC26 if SPI_MASTER
29 select SND_SOC_TLV320AIC3X if I2C
30 select SND_SOC_TWL4030 if TWL4030_CORE
31 select SND_SOC_UDA134X
32 select SND_SOC_UDA1380 if I2C
33 select SND_SOC_WM8350 if MFD_WM8350
34 select SND_SOC_WM8400 if MFD_WM8400
35 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
36 select SND_SOC_WM8523 if I2C
37 select SND_SOC_WM8580 if I2C
38 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
39 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
40 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
41 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
42 select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
43 select SND_SOC_WM8900 if I2C
44 select SND_SOC_WM8903 if I2C
45 select SND_SOC_WM8940 if I2C
46 select SND_SOC_WM8960 if I2C
47 select SND_SOC_WM8961 if I2C
48 select SND_SOC_WM8971 if I2C
49 select SND_SOC_WM8974 if I2C
50 select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
51 select SND_SOC_WM8990 if I2C
52 select SND_SOC_WM8993 if I2C
53 select SND_SOC_WM9081 if I2C
54 select SND_SOC_WM9705 if SND_SOC_AC97_BUS
55 select SND_SOC_WM9712 if SND_SOC_AC97_BUS
56 select SND_SOC_WM9713 if SND_SOC_AC97_BUS
58 Normally ASoC codec drivers are only built if a machine driver which
59 uses them is also built since they are only usable with a machine
60 driver. Selecting this option will allow these drivers to be built
61 without an explicit machine driver for test and development purposes.
63 Support for the bus types used to access the codecs to be built must
64 be selected separately.
68 config SND_SOC_WM_HUBS
70 default y if SND_SOC_WM8993=y
71 default m if SND_SOC_WM8993=m
73 config SND_SOC_AC97_CODEC
86 config SND_SOC_AD73311
95 # Cirrus Logic CS4270 Codec
99 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
100 # Select if you are affected by the errata where the part will not function
101 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
102 # not select any sample rates that require MCLK to be divided by 1.5.
103 config SND_SOC_CS4270_VD33_ERRATA
105 depends on SND_SOC_CS4270
107 config SND_SOC_CX20442
113 config SND_SOC_PCM3008
119 config SND_SOC_SSM2602
122 config SND_SOC_STAC9766
125 config SND_SOC_TLV320AIC23
128 config SND_SOC_TLV320AIC26
129 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
132 config SND_SOC_TLV320AIC3X
135 config SND_SOC_TWL4030
138 config SND_SOC_UDA134X
141 config SND_SOC_UDA1380
144 config SND_SOC_WM8350
147 config SND_SOC_WM8400
150 config SND_SOC_WM8510
153 config SND_SOC_WM8523
156 config SND_SOC_WM8580
159 config SND_SOC_WM8728
162 config SND_SOC_WM8731
165 config SND_SOC_WM8750
168 config SND_SOC_WM8753
171 config SND_SOC_WM8776
174 config SND_SOC_WM8900
177 config SND_SOC_WM8903
180 config SND_SOC_WM8940
183 config SND_SOC_WM8960
186 config SND_SOC_WM8961
189 config SND_SOC_WM8971
192 config SND_SOC_WM8974
195 config SND_SOC_WM8988
198 config SND_SOC_WM8990
201 config SND_SOC_WM8993
204 config SND_SOC_WM9081
207 config SND_SOC_WM9705
210 config SND_SOC_WM9712
213 config SND_SOC_WM9713
217 config SND_SOC_MAX9877