2 * Copyright (c) 2010 Cisco Systems, Inc.
4 * Portions based on tcm_loop_fabric_scsi.c and libfc/fc_fcp.c
6 * Copyright (c) 2007 Intel Corporation. All rights reserved.
7 * Copyright (c) 2008 Red Hat, Inc. All rights reserved.
8 * Copyright (c) 2008 Mike Christie
9 * Copyright (c) 2009 Rising Tide, Inc.
10 * Copyright (c) 2009 Linux-iSCSI.org
11 * Copyright (c) 2009 Nicholas A. Bellinger <nab@linux-iscsi.org>
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms and conditions of the GNU General Public License,
15 * version 2, as published by the Free Software Foundation.
17 * This program is distributed in the hope it will be useful, but WITHOUT
18 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
19 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
22 * You should have received a copy of the GNU General Public License along with
23 * this program; if not, write to the Free Software Foundation, Inc.,
24 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
27 /* XXX TBD some includes may be extraneous */
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/version.h>
32 #include <generated/utsrelease.h>
33 #include <linux/utsname.h>
34 #include <linux/init.h>
35 #include <linux/slab.h>
36 #include <linux/kthread.h>
37 #include <linux/types.h>
38 #include <linux/string.h>
39 #include <linux/configfs.h>
40 #include <linux/ctype.h>
41 #include <linux/hash.h>
42 #include <asm/unaligned.h>
43 #include <scsi/scsi.h>
44 #include <scsi/scsi_host.h>
45 #include <scsi/scsi_device.h>
46 #include <scsi/scsi_cmnd.h>
47 #include <scsi/libfc.h>
48 #include <scsi/fc_encode.h>
50 #include <target/target_core_base.h>
51 #include <target/target_core_transport.h>
52 #include <target/target_core_fabric_ops.h>
53 #include <target/target_core_device.h>
54 #include <target/target_core_tpg.h>
55 #include <target/target_core_configfs.h>
56 #include <target/configfs_macros.h>
61 * Deliver read data back to initiator.
62 * XXX TBD handle resource problems later.
64 int ft_queue_data_in(struct se_cmd *se_cmd)
66 struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
67 struct se_transport_task *task;
68 struct fc_frame *fp = NULL;
70 struct fc_lport *lport;
73 u32 f_ctl = FC_FC_EX_CTX | FC_FC_REL_OFF;
88 ep = fc_seq_exch(cmd->seq);
90 cmd->seq = lport->tt.seq_start_next(cmd->seq);
92 task = T_TASK(se_cmd);
94 remaining = se_cmd->data_length;
97 * Setup to use first mem list entry if any.
99 if (task->t_tasks_se_num) {
100 mem = list_first_entry(task->t_mem_list,
101 struct se_mem, se_list);
102 mem_len = mem->se_len;
103 mem_off = mem->se_off;
112 /* no scatter/gather in skb for odd word length due to fc_seq_send() */
113 use_sg = !(remaining % 4);
118 mem = list_entry(mem->se_list.next,
119 struct se_mem, se_list);
120 mem_len = min((size_t)mem->se_len, remaining);
121 mem_off = mem->se_off;
126 * If lport's has capability of Large Send Offload LSO)
127 * , then allow 'frame_len' to be as big as 'lso_max'
128 * if indicated transfer length is >= lport->lso_max
130 frame_len = (lport->seq_offload) ? lport->lso_max :
131 cmd->sess->max_frame;
132 frame_len = min(frame_len, remaining);
133 fp = fc_frame_alloc(lport, use_sg ? 0 : frame_len);
136 to = fc_frame_payload_get(fp, 0);
138 frame_off += frame_len;
140 * Setup the frame's max payload which is used by base
141 * driver to indicate HW about max frame size, so that
142 * HW can do fragmentation appropriately based on
143 * "gso_max_size" of underline netdev.
145 fr_max_payload(fp) = cmd->sess->max_frame;
147 tlen = min(mem_len, frame_len);
151 BUG_ON(!task->t_task_buf);
152 page_addr = task->t_task_buf + mem_off;
154 * In this case, offset is 'offset_in_page' of
155 * (t_task_buf + mem_off) instead of 'mem_off'.
157 off_in_page = offset_in_page(page_addr);
158 page = virt_to_page(page_addr);
159 tlen = min(tlen, PAGE_SIZE - off_in_page);
161 off_in_page = mem_off;
164 skb_fill_page_desc(fp_skb(fp),
165 skb_shinfo(fp_skb(fp))->nr_frags,
166 page, off_in_page, tlen);
168 fp_skb(fp)->data_len += tlen;
169 fp_skb(fp)->truesize +=
170 PAGE_SIZE << compound_order(page);
173 from = kmap_atomic(page + (mem_off >> PAGE_SHIFT),
176 from += mem_off & ~PAGE_MASK;
177 tlen = min(tlen, (size_t)(PAGE_SIZE -
178 (mem_off & ~PAGE_MASK)));
179 memcpy(to, from, tlen);
180 kunmap_atomic(page_addr, KM_SOFTIRQ0);
183 from = task->t_task_buf + mem_off;
184 memcpy(to, from, tlen);
194 (skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN))
197 f_ctl |= FC_FC_END_SEQ;
198 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
199 FC_TYPE_FCP, f_ctl, fh_off);
200 error = lport->tt.seq_send(lport, cmd->seq, fp);
202 /* XXX For now, initiator will retry */
203 if (printk_ratelimit())
204 printk(KERN_ERR "%s: Failed to send frame %p, "
205 "xid <0x%x>, remaining %zu, "
207 __func__, fp, ep->xid,
208 remaining, lport->lso_max);
211 return ft_queue_status(se_cmd);
215 * Receive write data frame.
217 void ft_recv_write_data(struct ft_cmd *cmd, struct fc_frame *fp)
219 struct se_cmd *se_cmd = &cmd->se_cmd;
220 struct fc_seq *seq = cmd->seq;
222 struct fc_lport *lport;
223 struct se_transport_task *task;
224 struct fc_frame_header *fh;
238 task = T_TASK(se_cmd);
241 fh = fc_frame_header_get(fp);
242 if (!(ntoh24(fh->fh_f_ctl) & FC_FC_REL_OFF))
246 * Doesn't expect even single byte of payload. Payload
247 * is expected to be copied directly to user buffers
248 * due to DDP (Large Rx offload) feature, hence
249 * BUG_ON if BUF is non-NULL
251 buf = fc_frame_payload_get(fp, 1);
252 if (cmd->was_ddp_setup && buf) {
253 printk(KERN_INFO "%s: When DDP was setup, not expected to"
254 "receive frame with payload, Payload shall be"
255 "copied directly to buffer instead of coming "
256 "via. legacy receive queues\n", __func__);
261 * If ft_cmd indicated 'ddp_setup', in that case only the last frame
262 * should come with 'TSI bit being set'. If 'TSI bit is not set and if
263 * data frame appears here, means error condition. In both the cases
264 * release the DDP context (ddp_put) and in error case, as well
265 * initiate error recovery mechanism.
267 ep = fc_seq_exch(seq);
268 if (cmd->was_ddp_setup) {
273 if (cmd->was_ddp_setup && ep->xid != FC_XID_UNKNOWN) {
274 f_ctl = ntoh24(fh->fh_f_ctl);
276 * If TSI bit set in f_ctl, means last write data frame is
277 * received successfully where payload is posted directly
278 * to user buffer and only the last frame's header is posted
279 * in legacy receive queue
281 if (f_ctl & FC_FC_SEQ_INIT) { /* TSI bit set in FC frame */
282 cmd->write_data_len = lport->tt.ddp_done(lport,
287 * Updating the write_data_len may be meaningless at
288 * this point, but just in case if required in future
289 * for debugging or any other purpose
291 printk(KERN_ERR "%s: Received frame with TSI bit not"
292 " being SET, dropping the frame, "
293 "cmd->sg <%p>, cmd->sg_cnt <0x%x>\n",
294 __func__, cmd->sg, cmd->sg_cnt);
295 cmd->write_data_len = lport->tt.ddp_done(lport,
297 lport->tt.seq_exch_abort(cmd->seq, 0);
302 rel_off = ntohl(fh->fh_parm_offset);
303 frame_len = fr_len(fp);
304 if (frame_len <= sizeof(*fh))
306 frame_len -= sizeof(*fh);
307 from = fc_frame_payload_get(fp, 0);
308 if (rel_off >= se_cmd->data_length)
310 if (frame_len + rel_off > se_cmd->data_length)
311 frame_len = se_cmd->data_length - rel_off;
314 * Setup to use first mem list entry if any.
316 if (task->t_tasks_se_num) {
317 mem = list_first_entry(task->t_mem_list,
318 struct se_mem, se_list);
319 mem_len = mem->se_len;
320 mem_off = mem->se_off;
332 mem = list_entry(mem->se_list.next,
333 struct se_mem, se_list);
334 mem_len = mem->se_len;
335 mem_off = mem->se_off;
338 if (rel_off >= mem_len) {
347 tlen = min(mem_len, frame_len);
350 to = kmap_atomic(page + (mem_off >> PAGE_SHIFT),
353 to += mem_off & ~PAGE_MASK;
354 tlen = min(tlen, (size_t)(PAGE_SIZE -
355 (mem_off & ~PAGE_MASK)));
356 memcpy(to, from, tlen);
357 kunmap_atomic(page_addr, KM_SOFTIRQ0);
359 to = task->t_task_buf + mem_off;
360 memcpy(to, from, tlen);
366 cmd->write_data_len += tlen;
369 if (cmd->write_data_len == se_cmd->data_length)
370 transport_generic_handle_data(se_cmd);