arch/mips/dts/sfr,nb4-ser.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "brcm,bcm6358.dtsi"
   9
  10 / {
  11         model = "SFR NeufBox 4 (Sercomm) Board";
  12         compatible = "sfr,nb4-ser", "brcm,bcm6358";
  13
  14         aliases {
  15                 serial0 = &uart0;
  16         };
  17
  18         chosen {
  19                 stdout-path = "serial0:115200n8";
  20         };
  21
  22         gpio-leds {
  23                 compatible = "gpio-leds";
  24
  25                 traffic_white {
  26                         label = "NB4-SER:white:traffic";
  27                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 service_blue {
  31                         label = "NB4-SER:blue:service";
  32                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wifi_white {
  36                         label = "NB4-SER:white:wifi";
  37                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 service_red {
  41                         label = "NB4-SER:red:service";
  42                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 service_green {
  46                         label = "NB4-SER:green:service";
  47                         gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
  48                 };
  49         };
  50 };
  51
  52 &ehci {
  53         status = "okay";
  54 };
  55
  56 &enet0 {
  57         status = "okay";
  58         phy = <&enet0phy>;
  59         phy-mode = "internal";
  60
  61         enet0phy: fixed-link {
  62                 reg = <1>;
  63                 speed = <100>;
  64                 full-duplex;
  65         };
  66 };
  67
  68 &enet1 {
  69         status = "okay";
  70         phy = <&enet1phy>;
  71         phy-mode = "mii";
  72
  73         enet1phy: fixed-link {
  74                 reg = <1>;
  75                 speed = <100>;
  76                 full-duplex;
  77         };
  78 };
  79
  80 &gpio0 {
  81         status = "okay";
  82 };
  83
  84 &leds {
  85         status = "okay";
  86         brcm,clk-div = <1>;
  87
  88         led@0 {
  89                 reg = <0>;
  90                 active-low;
  91                 label = "NB4-SER:white:alarm";
  92         };
  93
  94         led@2 {
  95                 reg = <2>;
  96                 active-low;
  97                 label = "NB4-SER:white:tv";
  98         };
  99
 100         led@3 {
 101                 reg = <3>;
 102                 active-low;
 103                 label = "NB4-SER:white:tel";
 104         };
 105
 106         led@4 {
 107                 reg = <4>;
 108                 active-low;
 109                 label = "NB4-SER:white:adsl";
 110         };
 111 };
 112
 113 &ohci {
 114         status = "okay";
 115 };
 116
 117 &pflash {
 118         status = "okay";
 119 };
 120
 121 &uart0 {
 122         u-boot,dm-pre-reloc;
 123         status = "okay";
 124 };
 125
 126 &usbh {
 127         status = "okay";
 128 };